A conic section, also referred to just as a 'Conic' is a curve obtained by intersecting a plane with a cone. Conic sections are the curves obtained by intersecting a plane with a double right circular cone. Imagine a cone being cut by a knife at different places creating different types of curves, which are known as Conic Sections.
The four main Conic sections are: Circle, Ellipse, Parabola, and Hyperbola.
Each type of conic section has unique properties and equations, making them essential for understanding orbital mechanics, designing optical systems, and solving quadratic equations
Formation of Conic Sections
Let's say we take a fixed vertical line. We'll call it “l”. Now make another line at a constant angle α from this line as shown in the image added below, the other line is "m".
Now if we start rotating the line m around l by keeping the angle the same. We will get a cone that extends to infinite in both directions.
The rotating line(m) is called the generator of the cone. The vertical line(l) is the axis of the cone. V is the vertex, it separates the cone into two parts called nappes.
Now when we take the intersection of the generated cone with a plane, the section obtained is called a conic section. This intersection generates different types of curves depending upon the angle of the plane that is intersecting with the cone.
Focus
The focus of a conic section is the point that is used to define various conic sections. The focus of a conic section is different for different conic sections, i.e. a parabola has one focus, while an ellipse and hyperbola have two foci.
Directrix
A line in the conic section that is perpendicular to the axis of the referred conic is called the directrix of the conic. The directrix of the conic is parallel to the conjugate axis and the latus rectum of the conic. The directrix varies for various conic sections. A circle has no directrix, a parabola has 1 directrix, ellipse and hyperbola have 2 directrices each.
Eccentricity
The Eccentricity of a conic section is the constant ratio of the distance of the point on the conic section from focus and directrix. We denote eccentricity by the letter "e" and the eccentricity of various conic sections are,
- For e = 0 the conic section is Circle
- For 0 ≤ e < 1 the conic section is Ellipse
- For e = 1 the conic section is Parabola
- For e > 1 the conic section is Hyperbola
Generated Conic Sections (Sections of Cone)
Depending upon the different angles at which the plane intersects the Cone, different types of curves are found. Imagine that an ice cream cone is in the hands, looking at the cone from the top it looks like a circle because the top view of an inverted cone is a circle, which gives a conclusion that cutting a cone with a plane exactly at 90° will provide a circle, Similarly, different angles will lead to different types of curves.
Let's see that plane makes an angle β with the vertical axis. Depending on the value of the angle there can be several curves of intersections. Suppose the vertical line and the generator line of the conic section make an angle α then various curves formed by the intersection of cone and plane are added below.
(The plane makes the angle β with the cone)
1. Circle
The circle is a conic section in which it is the locus of the point that is always equidistant from the center of one point. If the plane cuts the conic section at right angles, i.e. β = 90° then we get a circle. The image for the same is added below,
- The general equation of the circle is, (x - h)2 + (y - k)2 = r2.
- Coordinates of Focus: The circle's focus is its center, (h, k)
- Directrix: Not applicable, as circles do not have directrices.
2. Ellipse
If the plane cuts the conic section at an angle less than 90°, i.e. α < β < 90° then we get an ellipse. We define the parabola as the locus of all the points where the sum of distance from two fixed points (focus) is always in contact. The image for the same is added below,
- Standard Equation:
- Horizontal Major Axis: \frac{(x - h)^2}{a^2} + \frac{(y - k)^2}{b^2} = 1
- Vertical Major Axis: \frac{(x - h)^2}{b^2} + \frac{(y - k)^2}{a^2} = 1
- Coordinates of Foci:
- Horizontal ellipse: (h \pm c, k)
- Vertical ellipse: (h, k \pm c)
- Where c = \sqrt{a^2 - b^2}
- Equations of Directrices:
- Horizontal ellipse: x = h \pm \frac{a^2}{c}
- Vertical ellipse: y = k \pm \frac{a^2}{c}
3. Parabola
If the plane cuts the conic section at an angle where α is equal to β i.e. α = β then we get a parabola. the parabola is the locus of a point that moves in such a way that its distance is always the same distance from a fixed point (called Focus) and a given Line (called Directrix). The image for the same is added below,
- Standard Equation:
- Vertical Parabola: (x - h)^2 = 4p(y - k)
- Horizontal Parabola: (y - k)^2 = 4p(x - h)
- Coordinates of Focus:
- Vertical parabola: (h, k + p)
- Horizontal parabola: (h + p, k)
- Equations of Directrix:
- Vertical parabola: y=k−p
- Horizontal parabola: x=h−p
4. Hyperbola
If the plane cuts the conic section at an angle where β is less than α i.e. β ϵ [0, a] then we get a hyperbola. We define the hyperbola as the locus of a point where the ratio of distance from a fixed point (focus) and a fixed line (directrix) is always constant. The image for the same is added below,
- Standard Equation:
- Horizontal Transverse Axis:\frac{(x - h)^2}{a^2} - \frac{(y - k)^2}{b^2} = 1
- Vertical Transverse Axis: \frac{(y - k)^2}{a^2} - \frac{(x - h)^2}{b^2} = 1
- Coordinates of Foci:
- Horizontal hyperbola: (h \pm c, k)
- Vertical hyperbola: (h, k \pm c)
- Where c = \sqrt{a^2 + b^2}
- Equations of Directrices:
- Horizontal hyperbola: x = h \pm \frac{a^2}{c}
- Vertical hyperbola: y = k \pm \frac{a^2}{c}
Conic Sections Parameters
Various parameters of the conic section that are used to explain and trace various conic sections are,
- Principal Axis: A line passing through the center and the foci of a conic is called the principal axis, it is also called the major axis of the conic.
- Conjugate Axis: Conjugate axis is the axis that is perpendicular to the principal axis and passes through the center of the conic. It is also called the minor axis.
- Center: The center of the conic is defined as the point of intersection of the principal axis and the conjugate axis.
- Vertex: Vertex of the conic is defined as the point of the principal axis where the conic cuts the axis.
- Focal Chord: In a conic section focal chord is the chord passing through the focus of the conic section.
- Latus Rectum: A focal chord perpendicular to the axis of the conic section is called the latus rectum of the conic.
The standard form of the conic section is added below, For ellipses and hyperbolas, the standard form has the x-axis as the principal axis and the origin (0, 0) as the center. The vertices are (±a, 0), and the foci are (±c, 0). For the standard form, the conic section always passes through the origin. The standard forms of the various conic sections are,
- Circle: x2 + y2 = a2
- Ellipse: x2/a2 + y2/b2 = 1
- Hyperbola: x2/a2 – y2/b2 = 1
- Parabola: y2 = 4ax when a > 0
Conic Sections Equations
The standard equations of the conic section are added in the table below,
Conic Section | Equation when center is Origin (0, 0) | Equation when center is (h, k) |
|---|
Circle | x2 + y2 = r2; r is radius | (x – h)2 + (y – k)2 = r2; r is radius |
Ellipse | (x2/a2) + (y2/b2) = 1 | (x – h)2/a2 + (y – k)2/b2 = 1 |
Hyperbola | (x2/a2) – (y2/b2) = 1 | (x – h)2/a2 – (y – k)2/b2 = 1 |
Parabola | y2 = 4ax | (y - k)2 = 4a(x - h) |
Check - Identifying Conic Sections from their Equation
Conic Sections in Real Life
Various instances where we use the conic sections in our real life include,
- Various shapes around us such as cakes, tables, plates, etc. all are circular in nature.
- Orbits of planets around the sun are elliptical in nature.
- Telescopes and Antennas designed to observe the outer spaces have hyperbolic Mirrors and Lenses.
- The path of projectile motion is defined using a parabola, etc.
Articles Related to Applications of Conic Sections-
Articles related to Conic Sections
Solved Examples of Conic Sections
Example 1: Find the equation of a circle that has a center of (0, 0) and a radius is 5.
Solution:
We have studied the formula for the equation of the circle.
(x-h)2 + (y - k)2 = r2
We just need to plug in the values in the formula.
Here, h = 0, k = 0 and r = 5
(x - 0)2 + (y - 0)2 = 52
⇒x2 + y2 = 52
⇒x2 + y2 = 25
Example 2: Find the equation of the circle with center (-4, 5) and radius 4.
Solution:
The formula for the equation of the circle.
(x-h)2 + (y - k)2 = r2
We just need to plug in the values in the formula.
Here, h = -4, k = 5 and r = 4
(x - (-4))2 + (y - 5)2 = 52
⇒(x + 4)2 + (y - 5)2 = 25
⇒x2 + 16 + 8x + y2 + 25 - 10y = 25
⇒x2 + 8x + y2 -10y + 16= 0
Example 3: The equation given below is an equation of the circle, find out the radius and the center: x2 + 6x + y2 - 4y = 3
Solution:
We are given the equation, now to find out the radius and the center. We need to rearrange the equation such that this equation can come in the form given below.
(x-h)2 + (y - k)2 = r2
x2 + 6x + y2 - 4y = 3
⇒ x2 + (2)(3)x + y2 - 2(2)y = 3
We can see that these equations can be separated into two perfect squares.
⇒ x2 + (2)(3)x + 9 – 9 + y2 - 2(2)y + 4 – 4 = 3
⇒ (x + 3)2 - 9 + (y - 2)2 - 4 = 3
⇒ (x + 3)2 + (y - 2)2 = 3 + 4 + 9
⇒ (x + 3)2 + (y - 2)2 = 16
⇒ (x + 3)2 + (y - 2)2 = 42
Now comparing this equation with the standard equation of the circle, we notice,
h = -3, k = 2 and radius = 4.
Example 4: Find the equation of the circle, with center (-h,-k) and radius \sqrt{h^2 + k^2}
Solution:
The standard equation of the circle is given by,
(x-h)2 + (y - k)2 = r2
Here, we have h = -h and k = -k and radius = √{h2 + k2}
Putting these values into the equation
(x + h)2 + (y + k)2 = (√{h2 + k2})2
x2 + h2 + 2hx + y2 + k2 + 2ky = h2 + k2
x2 + y2 + 2hx + 2ky = 0
Example 5: Let's say we are given a line x + y = 2 and a circle that passes through the points (2,-2) and (3,4). It is also given that the center of the circle lies on the line. Find out the radius and center of the circle.
Solution:
Let's say the equation of the circle is, (x - h)2 + (y - k)2 = r2
Now we know that the center of the circle lies on the line x + y = 2. Since the center of the circle is (h, k), it should satisfy this line.
h + k = 2
Putting the value of h from this equation into the equation of the circle.
(x - (2 - k))2 + (y - k)2 = r2
Now we also know that the circle satisfies the points (2, -2) and (3, 4). Putting (2, -2) in the above equation.
(2-(2 - k))2 + (-2 - k)2 = r2
⇒ k2 + (k + 2)2 = r2
⇒ k2 + k2 + 4 + 4k = r2
⇒ 2k2 + 4 + 4k = r2 .....(1)
Putting the equation (3, 4) is,
(x-(2 - k))2 + (y - k)2 = r2
⇒ (3 - (2 - k))2 + (4 - k)2 = r2
⇒(1 - k)2 + (4 - k)2 = r2
⇒ k2 - 2k + 1 + 16 - 8k + k2 = r2
⇒ 2k2 - 10k + 17 = r2 ......(2)
Solving these equations we get, h = 0.7, k = 1.7 and r2 = 12.58
Read More:
Similar Reads
Maths Mathematics, often referred to as "math" for short. It is the study of numbers, quantities, shapes, structures, patterns, and relationships. It is a fundamental subject that explores the logical reasoning and systematic approach to solving problems. Mathematics is used extensively in various fields
5 min read
Basic Arithmetic
What are Numbers?Numbers are symbols we use to count, measure, and describe things. They are everywhere in our daily lives and help us understand and organize the world.Numbers are like tools that help us:Count how many things there are (e.g., 1 apple, 3 pencils).Measure things (e.g., 5 meters, 10 kilograms).Show or
15+ min read
Arithmetic OperationsArithmetic Operations are the basic mathematical operations—Addition, Subtraction, Multiplication, and Division—used for calculations. These operations form the foundation of mathematics and are essential in daily life, such as sharing items, calculating bills, solving time and work problems, and in
9 min read
Fractions - Definition, Types and ExamplesFractions are numerical expressions used to represent parts of a whole or ratios between quantities. They consist of a numerator (the top number), indicating how many parts are considered, and a denominator (the bottom number), showing the total number of equal parts the whole is divided into. For E
7 min read
What are Decimals?Decimals are numbers that use a decimal point to separate the whole number part from the fractional part. This system helps represent values between whole numbers, making it easier to express and measure smaller quantities. Each digit after the decimal point represents a specific place value, like t
10 min read
ExponentsExponents are a way to show that a number (base) is multiplied by itself many times. It's written as a small number (called the exponent) to the top right of the base number.Think of exponents as a shortcut for repeated multiplication:23 means 2 x 2 x 2 = 8 52 means 5 x 5 = 25So instead of writing t
9 min read
PercentageIn mathematics, a percentage is a figure or ratio that signifies a fraction out of 100, i.e., A fraction whose denominator is 100 is called a Percent. In all the fractions where the denominator is 100, we can remove the denominator and put the % sign.For example, the fraction 23/100 can be written a
5 min read
Algebra
Variable in MathsA variable is like a placeholder or a box that can hold different values. In math, it's often represented by a letter, like x or y. The value of a variable can change depending on the situation. For example, if you have the equation y = 2x + 3, the value of y depends on the value of x. So, if you ch
5 min read
Polynomials| Degree | Types | Properties and ExamplesPolynomials are mathematical expressions made up of variables (often represented by letters like x, y, etc.), constants (like numbers), and exponents (which are non-negative integers). These expressions are combined using addition, subtraction, and multiplication operations.A polynomial can have one
9 min read
CoefficientA coefficient is a number that multiplies a variable in a mathematical expression. It tells you how much of that variable you have. For example, in the term 5x, the coefficient is 5 — it means 5 times the variable x.Coefficients can be positive, negative, or zero. Algebraic EquationA coefficient is
8 min read
Algebraic IdentitiesAlgebraic Identities are fundamental equations in algebra where the left-hand side of the equation is always equal to the right-hand side, regardless of the values of the variables involved. These identities play a crucial role in simplifying algebraic computations and are essential for solving vari
14 min read
Properties of Algebraic OperationsAlgebraic operations are mathematical processes that involve the manipulation of numbers, variables, and symbols to produce new results or expressions. The basic algebraic operations are:Addition ( + ): The process of combining two or more numbers to get a sum. For example, 3 + 5 = 8.Subtraction (−)
3 min read
Geometry
Lines and AnglesLines and Angles are the basic terms used in geometry. They provide a base for understanding all the concepts of geometry. We define a line as a 1-D figure that can be extended to infinity in opposite directions, whereas an angle is defined as the opening created by joining two or more lines. An ang
9 min read
Geometric Shapes in MathsGeometric shapes are mathematical figures that represent the forms of objects in the real world. These shapes have defined boundaries, angles, and surfaces, and are fundamental to understanding geometry. Geometric shapes can be categorized into two main types based on their dimensions:2D Shapes (Two
2 min read
Area and Perimeter of Shapes | Formula and ExamplesArea and Perimeter are the two fundamental properties related to 2-dimensional shapes. Defining the size of the shape and the length of its boundary. By learning about the areas of 2D shapes, we can easily determine the surface areas of 3D bodies and the perimeter helps us to calculate the length of
10 min read
Surface Areas and VolumesSurface Area and Volume are two fundamental properties of a three-dimensional (3D) shape that help us understand and measure the space they occupy and their outer surfaces.Knowing how to determine surface area and volumes can be incredibly practical and handy in cases where you want to calculate the
10 min read
Points, Lines and PlanesPoints, Lines, and Planes are basic terms used in Geometry that have a specific meaning and are used to define the basis of geometry. We define a point as a location in 3-D or 2-D space that is represented using coordinates. We define a line as a geometrical figure that is extended in both direction
14 min read
Coordinate Axes and Coordinate Planes in 3D spaceIn a plane, we know that we need two mutually perpendicular lines to locate the position of a point. These lines are called coordinate axes of the plane and the plane is usually called the Cartesian plane. But in real life, we do not have such a plane. In real life, we need some extra information su
6 min read
Trigonometry & Vector Algebra
Trigonometric RatiosThere are three sides of a triangle Hypotenuse, Adjacent, and Opposite. The ratios between these sides based on the angle between them is called Trigonometric Ratio. The six trigonometric ratios are: sine (sin), cosine (cos), tangent (tan), cotangent (cot), cosecant (cosec), and secant (sec).As give
4 min read
Trigonometric Equations | Definition, Examples & How to SolveTrigonometric equations are mathematical expressions that involve trigonometric functions (such as sine, cosine, tangent, etc.) and are set equal to a value. The goal is to find the values of the variable (usually an angle) that satisfy the equation.For example, a simple trigonometric equation might
9 min read
Trigonometric IdentitiesTrigonometric identities play an important role in simplifying expressions and solving equations involving trigonometric functions. These identities, which include relationships between angles and sides of triangles, are widely used in fields like geometry, engineering, and physics. Some important t
10 min read
Trigonometric FunctionsTrigonometric Functions, often simply called trig functions, are mathematical functions that relate the angles of a right triangle to the ratios of the lengths of its sides.Trigonometric functions are the basic functions used in trigonometry and they are used for solving various types of problems in
6 min read
Inverse Trigonometric Functions | Definition, Formula, Types and Examples Inverse trigonometric functions are the inverse functions of basic trigonometric functions. In mathematics, inverse trigonometric functions are also known as arcus functions or anti-trigonometric functions. The inverse trigonometric functions are the inverse functions of basic trigonometric function
11 min read
Inverse Trigonometric IdentitiesInverse trigonometric functions are also known as arcus functions or anti-trigonometric functions. These functions are the inverse functions of basic trigonometric functions, i.e., sine, cosine, tangent, cosecant, secant, and cotangent. It is used to find the angles with any trigonometric ratio. Inv
9 min read
Calculus
Introduction to Differential CalculusDifferential calculus is a branch of calculus that deals with the study of rates of change of functions and the behaviour of these functions in response to infinitesimal changes in their independent variables.Some of the prerequisites for Differential Calculus include:Independent and Dependent Varia
6 min read
Limits in CalculusIn mathematics, a limit is a fundamental concept that describes the behaviour of a function or sequence as its input approaches a particular value. Limits are used in calculus to define derivatives, continuity, and integrals, and they are defined as the approaching value of the function with the inp
12 min read
Continuity of FunctionsContinuity of functions is an important unit of Calculus as it forms the base and it helps us further to prove whether a function is differentiable or not. A continuous function is a function which when drawn on a paper does not have a break. The continuity can also be proved using the concept of li
13 min read
DifferentiationDifferentiation in mathematics refers to the process of finding the derivative of a function, which involves determining the rate of change of a function with respect to its variables.In simple terms, it is a way of finding how things change. Imagine you're driving a car and looking at how your spee
2 min read
Differentiability of a Function | Class 12 MathsContinuity or continuous which means, "a function is continuous at its domain if its graph is a curve without breaks or jumps". A function is continuous at a point in its domain if its graph does not have breaks or jumps in the immediate neighborhood of the point. Continuity at a Point: A function f
11 min read
IntegrationIntegration, in simple terms, is a way to add up small pieces to find the total of something, especially when those pieces are changing or not uniform.Imagine you have a car driving along a road, and its speed changes over time. At some moments, it's going faster; at other moments, it's slower. If y
3 min read
Probability and Statistics
Basic Concepts of ProbabilityProbability is defined as the likelihood of the occurrence of any event. It is expressed as a number between 0 and 1, where 0 is the probability of an impossible event and 1 is the probability of a sure event.Concepts of Probability are used in various real life scenarios : Stock Market : Investors
7 min read
Bayes' TheoremBayes' Theorem is a mathematical formula used to determine the conditional probability of an event based on prior knowledge and new evidence. It adjusts probabilities when new information comes in and helps make better decisions in uncertain situations.Bayes' Theorem helps us update probabilities ba
13 min read
Probability Distribution - Function, Formula, TableA probability distribution is a mathematical function or rule that describes how the probabilities of different outcomes are assigned to the possible values of a random variable. It provides a way of modeling the likelihood of each outcome in a random experiment.While a Frequency Distribution shows
13 min read
Descriptive StatisticStatistics is the foundation of data science. Descriptive statistics are simple tools that help us understand and summarize data. They show the basic features of a dataset, like the average, highest and lowest values and how spread out the numbers are. It's the first step in making sense of informat
5 min read
What is Inferential Statistics?Inferential statistics is an important tool that allows us to make predictions and conclusions about a population based on sample data. Unlike descriptive statistics, which only summarize data, inferential statistics let us test hypotheses, make estimates, and measure the uncertainty about our predi
7 min read
Measures of Central Tendency in StatisticsCentral tendencies in statistics are numerical values that represent the middle or typical value of a dataset. Also known as averages, they provide a summary of the entire data, making it easier to understand the overall pattern or behavior. These values are useful because they capture the essence o
11 min read
Set TheorySet theory is a branch of mathematics that deals with collections of objects, called sets. A set is simply a collection of distinct elements, such as numbers, letters, or even everyday objects, that share a common property or rule.Example of SetsSome examples of sets include:A set of fruits: {apple,
3 min read
Practice