TDK Lambda's FQA Power Line EMC MIL-COTS DC Filters for Compliance and Noise Attenuation

Advanced Temperature Transmitter | TF5A https://lnkd.in/guPknFp6 The TF5A temperature transmitters are available in wall-mounted versions, with or without a display. It offers a wide range of adjustable temperature scaling via NFC. It is compatible with all Rotronic and third-party PT100 probes featuring a binder 4-pole connector, providing a broad range of temperature options and high accuracy. -Temperature measurement range -200… 600 °C -Compatible with all PT100 with binder 4 pole connector -Freely programmable outputs and scaling via NFC-Interface & supports NFC powerless

As we continue a mini-series of videos, here we look at a number of 🆒 test bed options 🎥 ➡️ Open side test bed ➡️ Additional small pull cylinder ➡️ Hydraulic covers ➡️ Radio frequency identification (RFID) ➡️ In-house calibration

The Pololu D42V55F24, D42V55F8, and D42V55F5.3 are compact synchronous step-down (buck) switching regulators that take input voltages from 24V up to 60V, 8.4V up to 60V, and 5.3V up to 60V (respectively) and delivers a tightly regulated 24V output at up to 4A, 8.4V output at up to 5A, and 5.3V output at up to 6A (again, respectively). https://bit.ly/3JQQa33

QP-S56 Static Eliminator https://lnkd.in/gH28bvB9 Stable performance achieved through modulation processing of working waveforms Low disturbance voltage, using AC-C0 technology to reduce the fluctuation of high-voltage circuits themselves Ionic balance remains stable over long-term use.

GM.International D1092S - Intrinsically Safe Digital Input Isolator The D1092S transfers signals from contacts or proximity sensors located in Zone 0/Div.1 to the safe area. With SIL2 compliance and three-port galvanic isolation, it ensures reliable interface between hazardous field devices and control systems.

STE-SF1206-00-S1-C is our new compact X12 signal generator frequency extender designed to deliver 110 to 170 GHz output. Designed to work seamlessly with other ACCESS products like our STL series signal generators. This module features: 🔹Compact size with contactless flange 🔹110 to 170 GHz output frequency for 6G testing needs 🔹2 dBm output power with excellent stability 🔹-20 dBc harmonic suppression 🔹Memory port for calibration data access 🔗 https://lnkd.in/gKBjxMtd #D-band #ACCESSbyEravant #subTHz #makingmillimeterwaveaccessible

To deliver exceptional electromagnetic shielding and waterproof protection in one solution, AMPHENOL LTW expands its cable gland portfolio with the innovative EMC Cable Gland. More information: https://buff.ly/aosHkVb

TCXO, Temperature Compensated Crystal Oscillator Temperature compensated crystal oscillators, TCXOs are used in many electronic circuit designs when a higher level of accuracy and stability is needed than is possible with a standard crystal oscillator. By applying a voltage to the control terminal according to the temperature, it’s possible to counteract the effect of temperature on the crystal. In this way it’s possible to create a very accurate oscillator. Find it more about temperature controlled oscillators: https://lnkd.in/d78VHqf #quartzcrystal #tcxo #electroniccomponents

Input and Output: Clearly marked points for signal input and amplified output. Power Supply: Indicated by the +30V and Gnd (Ground) connections. Transistors: Various transistors like BC556, MJ340, and TIP147 are used for amplification and switching. Resistors and Capacitors: A network of resistors (e.g., R1, R2, R3, R4, R5, R6, R7) and capacitors (C1, C7) are used for biasing, coupling, and filtering. Potentiometer: A variable resistor (170k) is included, likely for adjusting bias or gain. Speaker Output: The output is connected to a speaker symbol, indicating its

The compact frequency extender series is part of the Eravant ACCESS line family. The focus is to provide a compact package that fits the applications with ease. The integrated output isolator further improves the port isolation to provide stable output power to minimize the challenges of various DUT input impedance mismatches. The contactless flange eliminates the tedious tasks associated with waveguide alignment accuracy during the DUT connections.