LC New DALI Control Gear DALICU08-A
This new control gear has multi-functions and professional features:
1. It supports to measure power and detect internal temperature in fixture by DALI interface.
2. It can translate DALI dimming commands to 2CHs analog 0-10V output.
3. 0-10V output interfaces can sink or source current up to 25mA per channel.
4. It is with DiiA/Zhaga connectivity and extension to DT49, DT50, DT51, DT52.
5. This CU supports to select desired device type via operating mode.
-0x00: IEC62386-102 standard mode, D4i energy consumption setting.
-0x80: DALI dimming commands to analog 0-10V parallel outputs, and D4i energy consumption mode(default)
-0x81: Converting DALI commands to 0-10V dual channel outputs(CHA: Intensity, CHB:CCT) and D4i energy consumption mode.
6. It has over current protection when load connects to Switched, and save the failure information in NVM flash.
7. This control gear is integrated DALI PS, guaranteed output current 55mA/15V, save additional wire connection.
8. The AC load relay to protect output is an optional, it achieve 0-crossing switching if using AC load relay.
9. AC out put: 600VA Max. @ 120Vac
1150VA Max. @ 230Vac
1385VA Max. @ 277Vac
10. Rated supply voltage: 100-277Vac
11. Working temperature: -20℃ ~ +70℃
12. Warranty: 5years
This is standard functions, if want to revise some function, we can tailor it for you.