1. Reuse of Mine Tailings Through Geopolymerization Applied to 3D Printing: A Review of Progress, Challenges and Perspectives. (2025). Arn, Diego ; Morales, Carlos Genaro ; Morales-Aranibar, Luis ; da Silva, Jos Luiz ; la Rosa, Adolfo.
   In: Sustainability.
   RePEc:gam:jsusta:v:17:y:2025:i:6:p:2617-:d:1613494.

   Full description at Econpapers || Download paper

1. Allouzi, R. ; Al-Azhari, W. ; Allouzi, R. Conventional construction and 3D printing: a comparison study on material cost in Jordan. 2020 J Eng. 2020 -
   Paper not yet in RePEc: Add citation now
   
2. Archez, J. ; Texier-Mandoki, N. ; Bourbon, X. ; Caron, J.F. ; Rossignol, S. Shaping of geopolymer composites by 3D printing. 2021 J Build Eng. 34 -
   Paper not yet in RePEc: Add citation now
   

3. Barone, G. ; Buonomano, A. ; Giuzio, G.F. ; Palombo, A. Towards zero energy infrastructure buildings: optimal design of envelope and cooling system. 2023 Energy. 279 -

4. Baz, B. ; Aouad, G. ; Kleib, J. ; Bulteel, D. ; Remond, S. Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments. 2021 Constr Build Mater. 290 -
   Paper not yet in RePEc: Add citation now
   

5. Berman, B. 3-D printing: the new industrial revolution. 2012 Bus Horiz. 55 -

6. Bos, F. ; Wolfs, R. ; Ahmed, Z. ; Salet, T. Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing. 2016 Virtual Phys Prototyp. 11 -
   Paper not yet in RePEc: Add citation now
   

7. Bruno, R. ; Bevilacqua, P. Heat and mass transfer for the U-value assessment of opaque walls in the Mediterranean climate: energy implications. 2022 Energy. 261 -

8. Che, Y. ; Yang, H. Hydration products, pore structure, and compressive strength of extrusion-based 3D printed cement pastes containing nano calcium carbonate. 2022 Case Stud Constr Mater. 17 -
   Paper not yet in RePEc: Add citation now
   
9. Chen, Y. ; He, S. ; Gan, Y. ; Çopuroğlu, O. ; Veer, F. ; Schlangen, E. A review of printing strategies, sustainable cementitious materials and characterization methods in the context of extrusion-based 3D concrete printing. 2022 J Build Eng. 45 -
   Paper not yet in RePEc: Add citation now
   
10. Chen, Y. ; Jansen, K. ; Zhang, H. ; Romero Rodriguez, C. ; Gan, Y. ; Çopuroğlu, O. Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: an experimental and numerical study. 2020 Constr Build Mater. 262 -
    Paper not yet in RePEc: Add citation now
    
11. Dey, D. ; Panda, B. An experimental study of thermal performance of 3D printed concrete slabs. 2023 Mater Lett. 330 -
    Paper not yet in RePEc: Add citation now
    
12. Guzović, Z. ; Duić, N. ; Piacentino, A. ; Markovska, N. ; Mathiesen, B.V. ; Lund, H. Paving the way for the Paris agreement: contributions of SDEWES science. 2023 Energy. 263 -
    Paper not yet in RePEc: Add citation now
    
13. Hao, L. ; Xiao, J. ; Sun, J. ; Xia, B. ; Cao, W. Thermal conductivity of 3D printed concrete with recycled fine aggregate composite phase change materials. 2022 J Clean Prod. 364 -
    Paper not yet in RePEc: Add citation now
    
14. Heras Murcia, D. ; Genedy, M. ; Reda Taha, M.M. Examining the significance of infill printing pattern on the anisotropy of 3D printed concrete. 2020 Constr Build Mater. 262 -
    Paper not yet in RePEc: Add citation now
    
15. Holt, C. ; Edwards, L. ; Keyte, L. ; Moghaddam, F. ; Townsend, B. Chapter 17 - construction 3D printing. 2019 3D Concrete Printing Technology:
    Paper not yet in RePEc: Add citation now
    
16. Khan, S.A. ; Koç, M. ; Al-Ghamdi, S.G. Sustainability assessment, potentials and challenges of 3D printed concrete structures: a systematic review for built environmental applications. 2021 J Clean Prod. 303 -
    Paper not yet in RePEc: Add citation now
    
17. Kim, J.H. ; Park, M. Visualization of concrete slump flow using the kinect sensor. 2018 Sensors. 18 -
    Paper not yet in RePEc: Add citation now
    
18. Kruger, J. ; du Plessis, A. ; van Zijl, G. An investigation into the porosity of extrusion-based 3D printed concrete. 2021 Addit Manuf. 37 -
    Paper not yet in RePEc: Add citation now
    
19. Lee, H. ; Kim, J.H.J. ; Moon, J.H. ; Kim, W.W. ; Seo, E.A. Evaluation of the mechanical properties of a 3D-printed mortar. 2019 Materials. 12 -
    Paper not yet in RePEc: Add citation now
    
20. Li, Z. ; Xing, W. ; Sun, J. ; Feng, X. Multiscale structural characteristics and Heat–Moisture properties of 3D printed building Walls: a review. 2023 Constr Build Mater. 365 -
    Paper not yet in RePEc: Add citation now
    
21. Liu, C. ; Zhang, R. ; Liu, H. ; He, C. ; Wang, Y. ; Wu, Y. Analysis of the mechanical performance and damage mechanism for 3D printed concrete based on pore structure. 2022 Constr Build Mater. 314 -
    Paper not yet in RePEc: Add citation now
    
22. Liu, C. ; Zhang, Y. ; Banthia, N. Unveiling pore formation and its influence on micromechanical property and stress distribution of 3D printed foam concrete modified with hydroxypropyl methylcellulose and silica fume. 2023 Addit Manuf. 71 -
    Paper not yet in RePEc: Add citation now
    

23. Markovska, N. ; Duić, N. ; Mathiesen, B.V. ; Guzović, Z. ; Piacentino, A. ; Schlör, H. Addressing the main challenges of energy security in the twenty-first century – contributions of the conferences on sustainable development of energy, water and environment systems. 2016 Energy. 115 -

24. Masson-Delmotte, V. ; Zhai, P. ; Pörtner, H.-O. ; Roberts, D. ; Skea, J. ; Shukla, P.R. Summary for policymakers. Global warming of 1.5°C. 2018 :
    Paper not yet in RePEc: Add citation now
    
25. Mohan, M.K. ; Rahul, A.V. ; De Schutter, G. ; Van Tittelboom, K. Extrusion-based concrete 3D printing from a material perspective: a state-of-the-art review. 2021 Cem Concr Compos. 115 -
    Paper not yet in RePEc: Add citation now
    

26. Nemova, D. ; Kotov, E. ; Andreeva, D. ; Khorobrov, S. ; Olshevskiy, V. ; Vasileva, I. Experimental study on the thermal performance of 3D-printed enclosing structures. 2022 Energies. 15 -

27. Panda, B. ; Paul, S.C. ; Hui, L.J. ; Tay, Y.W.D. ; Tan, M.J. Additive manufacturing of geopolymer for sustainable built environment. 2017 J Clean Prod. 167 -
    Paper not yet in RePEc: Add citation now
    
28. Panda, B. ; Paul, S.C. ; Mohamed, N.A.N. ; Tay, Y.W.D. ; Tan, M.J. Measurement of tensile bond strength of 3D printed geopolymer mortar. 2018 Measurement. 113 -
    Paper not yet in RePEc: Add citation now
    

29. Radhi, H. Can envelope codes reduce electricity and CO2 emissions in different types of buildings in the hot climate of Bahrain?. 2009 Energy. 34 -

30. Rodriguez, F.B. ; Olek, J. ; Moini, R. ; Zavattieri, P.D. ; Youngblood, J.P. Linking solids content and flow properties of mortars to their three-dimensional printing characteristics. 2021 ACI Mater J. 118 -
    Paper not yet in RePEc: Add citation now
    

31. Saikia, P. ; Pancholi, M. ; Sood, D. ; Rakshit, D. Dynamic optimization of multi-retrofit building envelope for enhanced energy performance with a case study in hot Indian climate. 2020 Energy. 197 -

32. Sakin, M. ; Kiroglu, Y.C. 3D printing of buildings: construction of the sustainable houses of the future by BIM. 2017 Energy Proc. 134 -
    Paper not yet in RePEc: Add citation now
    
33. Scrivener, K.L. ; Snellings, R. ; Lothenbach, B. A practical guide to microstructural analysis of cementitious materials. 2016 CRC Press, Taylor & Francis Group:
    Paper not yet in RePEc: Add citation now
    

34. Shabunko, V. ; Badrinarayanan, S. ; Pillai, D.S. Evaluation of in-situ thermal transmittance of innovative building integrated photovoltaic modules: application to thermal performance assessment for green mark certification in the tropics. 2021 Energy. 235 -

35. Shakor, P. ; Nejadi, S. ; Paul, G. A study into the effect of different nozzles shapes and fibre-reinforcement in 3D printed mortar. 2019 Materials. 12 -
    Paper not yet in RePEc: Add citation now
    
36. Sikora, P. ; Techman, M. ; Federowicz, K. ; El-Khayatt, A.M. ; Saudi, H.A. ; Abd Elrahman, M. Insight into the microstructural and durability characteristics of 3D printed concrete: cast versus printed specimens. 2022 Case Stud Constr Mater. 17 -
    Paper not yet in RePEc: Add citation now
    
37. Souza, M.T. ; Ferreira, I.M. ; Guzi de Moraes, E. ; Senff, L. ; Novaes de Oliveira, A.P. 3D printed concrete for large-scale buildings: an overview of rheology, printing parameters, chemical admixtures, reinforcements, and economic and environmental prospects. 2020 J Build Eng. 32 -
    Paper not yet in RePEc: Add citation now
    
38. Stepashkin, Chukov DI. ; Senatov, F.S. ; Salimon, A.I. ; Korsunsky, A.M. ; Kaloshkin, S.D. 3D-printed PEEK-carbon fiber (CF) composites: structure and thermal properties. 2018 Compos Sci Technol. 164 319-326
    Paper not yet in RePEc: Add citation now
    
39. Sun, J. ; Xiao, J. ; Li, Z. ; Feng, X. Experimental study on the thermal performance of a 3D printed concrete prototype building. 2021 Energy Build. 241 -
    Paper not yet in RePEc: Add citation now
    
40. Tleoubaev, A ; Brzezinski, A Combined Guarded-Hot-Plate and Heat Flow Meter Method for Absolute Thermal Conductivitu Tests Excluding Thermal Contact Resistance. 2003 Proceedings of the Twenty-Seventh International Thermal Conductivity Conference. 27 -
    Paper not yet in RePEc: Add citation now
    
41. United Nations World population prospects 2019: highlights | multimedia library. 2019 United Nations Department of Economic and Social Affairs: United Nations
    Paper not yet in RePEc: Add citation now
    
42. van den Heever, M. ; du Plessis, A. ; Kruger, J. ; van Zijl, G. Evaluating the effects of porosity on the mechanical properties of extrusion-based 3D printed concrete. 2022 Cem Concr Res. 153 -
    Paper not yet in RePEc: Add citation now
    
43. Van Der Putten, J. ; Deprez, M. ; Cnudde, V. ; De Schutter, G. ; Van Tittelboom, K. Microstructural characterization of 3D printed cementitious materials. 2019 Materials. 12 -
    Paper not yet in RePEc: Add citation now
    
44. Wolfs, R.J.M. ; Bos, F.P. ; Salet, T.A.M. Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion. 2019 Cem Concr Res. 119 -
    Paper not yet in RePEc: Add citation now
    
45. Yu, S. ; Xia, M. ; Sanjayan, J. ; Yang, L. ; Xiao, J. ; Du, H. Microstructural characterization of 3D printed concrete. 2021 J Build Eng. 44 -
    Paper not yet in RePEc: Add citation now
    
46. Zhang, H. ; Wang, J. ; Liu, Y. ; Zhang, X. ; Zhao, Z. Effect of processing parameters on the printing quality of 3D printed composite cement-based materials. 2022 Mater Lett. 308 -
    Paper not yet in RePEc: Add citation now
    

47. Žigart, M. ; Kovačič Lukman, R. ; Premrov, M. ; Žegarac Leskovar, V. Environmental impact assessment of building envelope components for low-rise buildings. 2018 Energy. 163 -

1. Energy Consumption Analysis and Optimization of Substation Building in Cold Regions Considering Various Influence Factors. (2025). Chen, Heng ; Lin, Junru ; Zhang, Ruyu ; Sun, Wen.
   In: Energies.
   RePEc:gam:jeners:v:18:y:2025:i:8:p:1948-:d:1632321.

   Full description at Econpapers || Download paper

2. Towards sustainable ships: Advancing energy efficiency of HVAC systems onboard through digital twin. (2025). Barone, Giovanni ; Russo, Giuseppe ; Palombo, Adolfo ; Giuzio, Giovanni Francesco ; del Papa, Gianluca ; Buonomano, Annamaria.
   In: Energy.
   RePEc:eee:energy:v:317:y:2025:i:c:s0360544225000775.

   Full description at Econpapers || Download paper

3. Sustainability Development through a Nearly Zero Energy Building Implementation Case: An Office Building in South Jakarta. (2024). Noviandri, Muhammad Aqil ; Hamdani, Hanif ; Farizal, Farizal.
   In: Sustainability.
   RePEc:gam:jsusta:v:16:y:2024:i:16:p:7027-:d:1457395.

   Full description at Econpapers || Download paper

4. Review of Construction Technology of Advanced Energy Infrastructure. (2024). Tian, LI ; Han, Jianyong.
   In: Energies.
   RePEc:gam:jeners:v:17:y:2024:i:16:p:4157-:d:1460629.

   Full description at Econpapers || Download paper

5. Optimizing energy efficiency in mediterranean single-family homes: A parametric study of building typology, orientation, and BIPV integration. (2024). Vassiliades, C.
   In: Renewable Energy.
   RePEc:eee:renene:v:237:y:2024:i:pa:s0960148124016094.

   Full description at Econpapers || Download paper

6. A holistic methodology for designing novel flat plate evacuated solar thermal collectors: Modelling and experimental assessment. (2024). Kalogirou, Soteris ; Ktistis, Panayiotis ; Barone, Giovanni ; Buonomano, Annamaria ; Palombo, Adolfo.
   In: Renewable Energy.
   RePEc:eee:renene:v:232:y:2024:i:c:s0960148124010358.

   Full description at Econpapers || Download paper

7. Energy efficiency and indoor thermal comfort of railway carriages: Development of an innovative passenger-centric-control framework for HVAC systems. (2024). Russo, G ; Giuzio, G F ; Forzano, C ; Palombo, A ; Buonomano, A.
   In: Energy.
   RePEc:eee:energy:v:307:y:2024:i:c:s036054422402214x.

   Full description at Econpapers || Download paper

8. Influence of printing parameters on the thermal properties of 3D-printed construction structures. (2024). Sovetova, Meruyert ; Calautit, John Kaiser.
   In: Energy.
   RePEc:eee:energy:v:305:y:2024:i:c:s0360544224020395.

   Full description at Econpapers || Download paper

9. Optimising low-temperature district heating networks: A simulation-based approach with experimental verification. (2024). Mongibello, L ; Russo, G ; Forzano, C ; Palombo, A ; Buonomano, A.
   In: Energy.
   RePEc:eee:energy:v:304:y:2024:i:c:s0360544224017274.

   Full description at Econpapers || Download paper

10. Designing aggregation criteria for end-users integration in energy communities: Energy and economic optimisation based on hybrid neural networks models. (2024). Russo, G ; Giuzio, G F ; Cipolla, G ; Barone, G ; Forzano, C ; Buonomano, A.
    In: Applied Energy.
    RePEc:eee:appene:v:371:y:2024:i:c:s0306261924009267.

    Full description at Econpapers || Download paper

11. Socio-Economic Barriers to Adopting Energy-Saving Bioclimatic Strategies in a Mediterranean Sustainable Real Estate Setting: A Quantitative Analysis of Resident Perspectives. (2023). Astara, Olga-Eleni ; Vardopoulos, Ioannis ; Barone, Giovanni ; Vassiliades, Constantinos ; Minterides, Christos.
    In: Energies.
    RePEc:gam:jeners:v:16:y:2023:i:24:p:7952-:d:1295897.

    Full description at Econpapers || Download paper

12. How to achieve energy efficiency and sustainability of large ships: a new tool to optimize the operation of on-board diesel generators. (2023). Maka, Robert ; Barone, Giovanni ; del Papa, Gianluca ; Buonomano, Annamaria ; Palombo, Adolfo.
    In: Energy.
    RePEc:eee:energy:v:282:y:2023:i:c:s0360544223016821.

    Full description at Econpapers || Download paper

13. Presenting Cloud Business Performance for Manufacturing Organizations. (2020). Chang, Victor.
    In: Information Systems Frontiers.
    RePEc:spr:infosf:v:22:y:2020:i:1:d:10.1007_s10796-017-9798-3.

    Full description at Econpapers || Download paper

14. At The Roots Of The Fourth Industrial Revolution: How ICT Investments Affect Industry 4.0 Adoption. (2020). Micelli, Stefano ; Capestro, Mauro ; Bettiol, Marco ; di Maria, Eleonora.
    In: Marco Fanno Working Papers.
    RePEc:pad:wpaper:0253.

    Full description at Econpapers || Download paper

15. Understanding the determinants of novel technology adoption among teachers: the case of 3D printing. (2020). Holzmann, Patrick ; Schwarz, Erich J ; Audretsch, David B.
    In: The Journal of Technology Transfer.
    RePEc:kap:jtecht:v:45:y:2020:i:1:d:10.1007_s10961-018-9693-1.

    Full description at Econpapers || Download paper

16. Framework for Life Cycle Sustainability Assessment of Additive Manufacturing. (2020). Godina, Radu ; Peas, Paulo ; Ribeiro, Ines ; Carvalho, Helena ; Salman, Hafiz ; Cardeal, Gonalo ; Matos, Florinda ; Jacinto, Celeste.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:3:p:929-:d:313528.

    Full description at Econpapers || Download paper

17. Smart factory performance and Industry 4.0. (2020). Castagnoli, Rebecca ; Cugno, Monica ; Buchi, Giacomo.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:150:y:2020:i:c:s004016251931217x.

    Full description at Econpapers || Download paper

18. Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability. (2020). Kumar, Vikas ; O'Regan, Nicholas ; Garza-Reyes, Jose Arturo ; Talavera, Irene ; Bhattacharya, Arijit ; Ghobadian, Abby.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:219:y:2020:i:c:p:457-468.

    Full description at Econpapers || Download paper

19. Digital Transformation Maturity: A Systematic Review of Literature. (2019). Teichert, Roman.
    In: Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis.
    RePEc:mup:actaun:actaun_2019067061673.

    Full description at Econpapers || Download paper

20. Patient-Specific Coronary Artery 3D Printing Based on Intravascular Optical Coherence Tomography and Coronary Angiography. (2019). Luo, Xin ; Zhou, Wen ; Che, Wenliang ; Chen, Sirui ; Liu, Qing ; Zeng, Nianyin ; Zhang, Guokai ; Xu, Gaowei ; Cheng, Yongqiang ; Lin, Fan ; Peng, Yonghong ; Lan, Yisha ; Huang, Chenxi.
    In: Complexity.
    RePEc:hin:complx:5712594.

    Full description at Econpapers || Download paper

21. Contextual Impacts on Industrial Processes Brought by the Digital Transformation of Manufacturing: A Systematic Review. (2019). Bellini, Francesco ; Amendola, Carlo ; Savastano, Marco ; Dascenzo, Fabrizio.
    In: Sustainability.
    RePEc:gam:jsusta:v:11:y:2019:i:3:p:891-:d:204465.

    Full description at Econpapers || Download paper

22. Additive Manufacturing: Exploring the Social Changes and Impacts. (2019). Godina, Radu ; Peas, Paulo ; Ribeiro, Ines ; Carvalho, Helena ; Matos, Florinda ; Jacinto, Celeste.
    In: Sustainability.
    RePEc:gam:jsusta:v:11:y:2019:i:14:p:3757-:d:247016.

    Full description at Econpapers || Download paper

23. The strategic role of logistics in the industry 4.0 era. (2019). Veelenturf, Lucas P ; Tang, Christopher S.
    In: Transportation Research Part E: Logistics and Transportation Review.
    RePEc:eee:transe:v:129:y:2019:i:c:p:1-11.

    Full description at Econpapers || Download paper

24. Industry 4.0: A bibliometric review of its managerial intellectual structure and potential evolution in the service industries. (2019). Borghi, Matteo ; Mariani, Marcello.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:149:y:2019:i:c:s0040162519311345.

    Full description at Econpapers || Download paper

25. How aluminum changed the world: A metallurgical revolution through technological and cultural perspectives. (2019). Ashkenazi, Dana.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:143:y:2019:i:c:p:101-113.

    Full description at Econpapers || Download paper

26. Anticipating technological convergence: Link prediction using Wikipedia hyperlinks. (2019). Kim, Seungho ; Lee, Changyong.
    In: Technovation.
    RePEc:eee:techno:v:79:y:2019:i:c:p:25-34.

    Full description at Econpapers || Download paper

27. Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing. (2019). Kleer, Robin ; Piller, Frank T.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:216:y:2019:i:c:p:23-34.

    Full description at Econpapers || Download paper

28. A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society. (2019). Caviggioli, Federico ; Ughetto, Elisa.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:208:y:2019:i:c:p:254-268.

    Full description at Econpapers || Download paper

29. The emergence of the maker movement: Implications for entrepreneurship research. (2019). Bradley, Steven W ; Browder, Russell E ; Aldrich, Howard E.
    In: Journal of Business Venturing.
    RePEc:eee:jbvent:v:34:y:2019:i:3:p:459-476.

    Full description at Econpapers || Download paper

30. Digitális átalakulás és fenntarthatóság. A technológiaoptimista környezetgazdászok és a pesszimista ökológiai közgazdászok közötti vita újraindítása. (2018). Szalavetz, Andrea.
    In: Közgazdasági Szemle (Economic Review - monthly of the Hungarian Academy of Sciences).
    RePEc:ksa:szemle:1800.

    Full description at Econpapers || Download paper

31. What Drives the Implementation of Industry 4.0? The Role of Opportunities and Challenges in the Context of Sustainability. (2018). Voigt, Kai-Ingo ; Muller, Julian Marius ; Kiel, Daniel.
    In: Sustainability.
    RePEc:gam:jsusta:v:10:y:2018:i:1:p:247-:d:127650.

    Full description at Econpapers || Download paper

32. Transformative Sustainable Business Models in the Light of the Digital Imperative—A Global Business Economics Perspective. (2018). Brenner, Barbara.
    In: Sustainability.
    RePEc:gam:jsusta:v:10:y:2018:i:12:p:4428-:d:185726.

    Full description at Econpapers || Download paper

33. Complementary multiplatforms in the growing innovation ecosystem: Evidence from 3D printing technology. (2018). Kim, Wonjoon ; Park, Kyungbae ; Kwak, Kiho.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:136:y:2018:i:c:p:192-207.

    Full description at Econpapers || Download paper

34. Business models dynamics and business ecosystems in the emerging 3D printing industry. (2018). Chen, Weiwei ; Rong, KE ; Patton, Dean.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:134:y:2018:i:c:p:234-245.

    Full description at Econpapers || Download paper

35. Critical success factors for adoption of 3D printing. (2018). Chen, Yi-Fan ; Yeh, Ching-Chiang.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:132:y:2018:i:c:p:209-216.

    Full description at Econpapers || Download paper

36. Insights into relationships between disruptive technology/innovation and emerging technology: A bibliometric perspective. (2018). Li, Munan ; Suominen, Arho ; Porter, Alan L.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:129:y:2018:i:c:p:285-296.

    Full description at Econpapers || Download paper

37. Building the layers of a new manufacturing taxonomy: How 3D printing is creating a new landscape of production eco-systems and competitive dynamics. (2018). Pilkington, Alan ; Frandsen, Thomas ; Pisano, Paola ; Kapetaniou, Chrystalla ; Rieple, Alison.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:128:y:2018:i:c:p:22-35.

    Full description at Econpapers || Download paper

38. The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review. (2018). Wits, Wessel W ; Jafari, Davoud.
    In: Renewable and Sustainable Energy Reviews.
    RePEc:eee:rensus:v:91:y:2018:i:c:p:420-442.

    Full description at Econpapers || Download paper

39. The impact of 3D Printing Technology on the supply chain: Manufacturing and legal perspectives. (2018). Lim, Jia Jia ; Griffin, James ; Chan, Hing Kai ; Zeng, Fangli.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:205:y:2018:i:c:p:156-162.

    Full description at Econpapers || Download paper

40. A supply chain coordination mechanism for common items subject to failure in the electronics, defense, and medical industries. (2018). Kim, Seung-Lae ; Sher, Mikhail M ; Paz, Michael T ; Banerjee, Avijit.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:203:y:2018:i:c:p:164-173.

    Full description at Econpapers || Download paper

41. Additive manufacturing and the global factory: Disruptive technologies and the location of international business. (2018). Hannibal, Martin ; Knight, Gary.
    In: International Business Review.
    RePEc:eee:iburev:v:27:y:2018:i:6:p:1116-1127.

    Full description at Econpapers || Download paper

42. Additive manufacturing technology adoption: an empirical analysis of general and supply chain-related determinants. (2017). Oettmeier, Katrin ; Hofmann, Erik.
    In: Journal of Business Economics.
    RePEc:spr:jbecon:v:87:y:2017:i:1:d:10.1007_s11573-016-0806-8.

    Full description at Econpapers || Download paper

43. The Environmental Impact of Advanced Manufacturing Technologies: Examples from Hungary. (2017). Szalavetz, Andrea.
    In: Central European Business Review.
    RePEc:prg:jnlcbr:v:2017:y:2017:i:2:id:177:p:18-29.

    Full description at Econpapers || Download paper

44. The Influence of 3D Printing on Global Container Multimodal Transport System. (2017). Chen, Zhen.
    In: Complexity.
    RePEc:hin:complx:7849670.

    Full description at Econpapers || Download paper

45. The alignment of University curricula with the building of a Smart City: A case study from Barcelona. (2017). Fernandez, Vicenc ; Grimaldi, Didier.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:123:y:2017:i:c:p:298-306.

    Full description at Econpapers || Download paper

46. 3D printing and the third mission: The university in the materialization of intellectual capital. (2017). Bhme, Tillmann ; Birtchnell, Thomas ; Gorkin, Robert.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:123:y:2017:i:c:p:240-249.

    Full description at Econpapers || Download paper

47. Predicting the future of additive manufacturing: A Delphi study on economic and societal implications of 3D printing for 2030. (2017). Jiang, Ruth ; Kleer, Robin ; Piller, Frank T.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:117:y:2017:i:c:p:84-97.

    Full description at Econpapers || Download paper

48. Unlocking value for a circular economy through 3D printing: A research agenda. (2017). Baumers, M ; Mortara, L ; Rowley, J ; Reed-Tsochas, F P ; Charnley, F ; Garmulewicz, A ; Knowles, S ; Ford, S J ; Brown, P ; Despeisse, M.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:115:y:2017:i:c:p:75-84.

    Full description at Econpapers || Download paper

49. Social manufacturing: When the maker movement meets interfirm production networks. (2017). Hamalainen, Markko ; Karjalainen, Jesse.
    In: Business Horizons.
    RePEc:eee:bushor:v:60:y:2017:i:6:p:795-805.

    Full description at Econpapers || Download paper

50. The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing. (2017). Attaran, Mohsen.
    In: Business Horizons.
    RePEc:eee:bushor:v:60:y:2017:i:5:p:677-688.

    Full description at Econpapers || Download paper

51. Informing Additive Manufacturing technology adoption: total cost and the impact of capacity utilisation. (2017). Beltrametti, Luca ; Hague, Richard ; Baumers, Martin ; Gasparre, Angelo.
    In: Papers.
    RePEc:arx:papers:1706.02090.

    Full description at Econpapers || Download paper

52. 3D Printing – A New Industrial Revolution. (2016). Dumitrescu, George ; Tanase, Ion Alexandru.
    In: Knowledge Horizons - Economics.
    RePEc:khe:journl:v:8:y:2016:i:1:p:32-39.

    Full description at Econpapers || Download paper

53. From technological to symbolic innovation? Open source, Maker Movement and global demand for 3D printers. (2016). Grilli, Luca ; fassio, claudio.
    In: Papers in Innovation Studies.
    RePEc:hhs:lucirc:2016_007.

    Full description at Econpapers || Download paper

54. Frugal innovations and 3D printing: insights from the field. (2016). Rodhain, Florence ; Barlette, Yves ; Maric, Josip.
    In: Post-Print.
    RePEc:hal:journl:hal-01412871.

    Full description at Econpapers || Download paper

55. Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing. (2016). Bogers, Marcel ; Hadar, Ronen ; Bilberg, Arne .
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:102:y:2016:i:c:p:225-239.

    Full description at Econpapers || Download paper

56. The non-disruptive emergence of an ecosystem for 3D Printing — Insights from the hearing aid industrys transition 1989–2008. (2016). Sandstrm, Christian G.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:102:y:2016:i:c:p:160-168.

    Full description at Econpapers || Download paper

57. Economic Implications of Additive Manufacturing and the Contribution of MIS. (2015). Lasi, Heiner ; Kemper, Hans-Georg ; Thiesse, Frederic ; Piller, Frank ; Morar, Dominik ; Minshall, Tim ; Ford, Simon ; Buxmann, Peter ; Moisa, Michelle ; Wirth, Marco ; Mortara, Letizia.
    In: Business & Information Systems Engineering: The International Journal of WIRTSCHAFTSINFORMATIK.
    RePEc:spr:binfse:v:57:y:2015:i:2:p:139-148.

    Full description at Econpapers || Download paper

58. THE DISRUPTIVE FORCE OF 3D PRINTING ON SUPPLY CHAINS. (2015). Alexandra Ioana FLOREA IONESCU, .
    In: Business Excellence and Management.
    RePEc:rom:bemann:v:5:y:2015:i:2:p:102-109.

    Full description at Econpapers || Download paper

59. The cash is in the medium, not in the machine: Toward the golden moments of 3D printing. (2015). Roth, Steffen.
    In: Working Papers.
    RePEc:hal:wpaper:hal-01206562.

    Full description at Econpapers || Download paper

60. Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited. (2015). Kleer, Robin ; Piller, Frank T. ; Weller, Christian.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:164:y:2015:i:c:p:43-56.

    Full description at Econpapers || Download paper

61. A global sustainability perspective on 3D printing technologies. (2014). Schoot Uiterkamp, Anton J. M., ; Gebler, Malte ; Visser, Cindy .
    In: Energy Policy.
    RePEc:eee:enepol:v:74:y:2014:i:c:p:158-167.

    Full description at Econpapers || Download paper

62. Risk shifting in the context of 3D printing: an insurability perspective. (). Li, Shu ; Faure, Michael.
    In: The Geneva Papers on Risk and Insurance - Issues and Practice.
    RePEc:pal:gpprii:v::y::i::d:10.1057_s41288-020-00164-9.

    Full description at Econpapers || Download paper

63. Too much cocited documents. This list is not complete

Report date: 2025-10-04 11:29:15 || Missing content? Let us know