This document has not been cited yet.

1. Abubakr, M. ; Abbas, A.T. ; Tomaz, I. ; Soliman, M.S. ; Luqman, M. ; Hegab, H. Sustainable and smart manufacturing: an integrated approach. 2020 Sustainability. 12 2280-

2. Baldé, C.P. ; Forti, V. ; Gray, V. ; Kuehr, R. ; Stegmann, P. . 2017 United Nations University (UNU), International Telecommunication Union (ITU) & International Solid Waste Association (ISWA: Bonn/Geneva/Vienna
   Paper not yet in RePEc: Add citation now
   
3. Basel Action Network Holes in the Circular Economy: WEEE Leakage from Europe. 2018 :
   Paper not yet in RePEc: Add citation now
   
4. BIO by Deloitte Study on data for a raw material system analysis: roadmap and test of the fully operational MSA for raw materials. 2015 Prepared for the European Commission, DG GROW. -
   Paper not yet in RePEc: Add citation now
   
5. Birloaga, I. ; Veglió, F. Hydrometallurgical processing of waste printed circuit boards. 2018 En : Veglió, I. ; Birloaga, I. Waste Electrical and Electronic Equipment Recycling: Aqueous Recovery Methods. Elsevier:
   Paper not yet in RePEc: Add citation now
   
6. Blömeke, S. ; Rickert, J. ; Mennenga, M. ; Thiede, S. ; Spengler, T.S. ; Herrmann, C. Recycling 4.0 – mapping smart manufacturing solutions to remanufacturing and recycling operations. 2020 Procedia CIRP. 90 600-605
   Paper not yet in RePEc: Add citation now
   

7. Bloodworth, A. Resources: track flows to manage technology-metal supply. 2014 Nature. 505 19-20

8. Brealey, R.A. ; Myers, S.C. ; Allen, F. ISE Principles of Corporate Finance. 2020 McGraw-Hill Education: New York
   Paper not yet in RePEc: Add citation now
   
9. Carrara, S. ; Bobba, S. ; Blagoeva, D. ; Alves Dias, P. ; Cavalli, A. ; Georgitzikis, K. ; Grohol, M. ; Itul, A. ; Kuzov, T. ; Latunussa, C. ; Lyons, L. ; Malano, G. ; Maury, T. ; Prior Arce, Á. ; Somers, J. ; Telsnig, T. ; Veeh, C. ; Wittmer, D. ; Black, C. ; Pennington, D. ; Christou, M. Supply Chain Analysis and Material Demand Forecast in Strategic Technologies and Sectors in the EU – A Foresight Study. 2023 Publications Office of the European Union: Luxembourg
   Paper not yet in RePEc: Add citation now
   

10. Ciliberto, C. ; Szopik-Depczynska, K. ; Tarczynska-Łuniewska, M. ; Ruggieri, A. ; Ioppolo, G. Enabling the Circular Economy transition: a sustainable lean manufacturing recipe for Industry 4.0. 2021 Bus. Strat. Environ.. 1-18

11. Council of the European Union Council directive 1999/31/EC of 26 april 1999 on the landfill of waste. 1999 Off. J. Eur. Communities - Legislation. 182 1-19
    Paper not yet in RePEc: Add citation now
    
12. Council of the European Union, 2009. Review of the EU Sustainable Development Strategy – presidency report, 16818/09, IH/pc, 1 December 2009.
    Paper not yet in RePEc: Add citation now
    

13. Cucchiella, F. ; D'Adamo, I. ; Koh, S.C.L. ; Rosa, P. Recycling of WEEE: an economic assessment of present and future e-waste streams. 2015 Renew. Sustain. Energy Rev.. 51 263-272

14. European Commission Communication from the commission to the European parliament, the council, the European economic and social committee and the committee of the regions. 2015 COM:
    Paper not yet in RePEc: Add citation now
    
15. European Commission Communication from the commission to the European parliament, the council, the European economic and social committee and the committee of the regions. 2020 :
    Paper not yet in RePEc: Add citation now
    
16. European Commission Communication from the commission to the European parliament, the council, the European economic and social committee and the committee of the regions. 2020 COM:
    Paper not yet in RePEc: Add citation now
    
17. European Commission Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions. 2020 The European Green Deal:
    Paper not yet in RePEc: Add citation now
    
18. European Commission, 2021b. Proposal for a Regulation of the European Parliament and of the Council on shipments of waste and amending Regulations (EU) No 1257/2013 and (EU) No 2020/1056. COM(2021) 709 final, 17 November.
    Paper not yet in RePEc: Add citation now
    
19. European Commission, 2022a. Proposal for a Regulation of the European Parliament and of the Council on packaging and packaging waste, amending Regulation (EU) 2019/1020 and Directive (EU) 2019/904, and repealing Directive 94/62/EC. COM/2022/677 final.
    Paper not yet in RePEc: Add citation now
    
20. European Commission, 2022b. Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions: EU policy framework on biobased, biodegradable and compostable plastics. COM(2022) 682 final, 30 November.
    Paper not yet in RePEc: Add citation now
    
21. European Parliament New EU Regulatory Framework for Batteries: Setting Sustainability Requirements. Briefing: EU Legislation in Progress, PE 689.337. 2022 :
    Paper not yet in RePEc: Add citation now
    
22. European Parliament Resource efficiency and the circular economy. 2023 European Parliament:
    Paper not yet in RePEc: Add citation now
    
23. European Parliament and Council . 2012 :
    Paper not yet in RePEc: Add citation now
    
24. European Parliament and Council Directive (EU) 2018/851 amending Directive 2008/98/EC on waste (Text with EEA relevance). PE/11/2018/REV/2. 2018 Off. J. Eur. Union L. 150 109-140
    Paper not yet in RePEc: Add citation now
    
25. European Parliament and Council Directive 2000/53/EC of the European parliament and of the council of 18 september 2000 on end-of-life vehicles. 2000 Off. J. Eur. Union L. -
    Paper not yet in RePEc: Add citation now
    
26. European Parliament and Council Directive 2008/98/EC of the European parliament and of the council of 19 november 2008 on waste and repealing certain directives. 2008 Off. J. Eur. Union L. 312/3 -
    Paper not yet in RePEc: Add citation now
    
27. European Parliament and Council Directive 2010/75/EU on industrial emissions (integrated pollution prevention and control) (recast). 2010 Official Journal L. 334 17-119
    Paper not yet in RePEc: Add citation now
    
28. European Parliament and Council Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2011 :
    Paper not yet in RePEc: Add citation now
    
29. European Parliament and Council Regulation (EC) No 1013/2006 of the European Parliament and of the Council of 14 June 2006 on the Shipment of Waste (2006). 2006 :
    Paper not yet in RePEc: Add citation now
    
30. European Parliament and Council Regulation (EU) 2023/1542 Concerning Batteries and Waste Batteries, Amending Directive 2008/98/EC and Regulation (EU) 2019/1020 and Repealing Directive 2006/66/EC. 2023 :
    Paper not yet in RePEc: Add citation now
    
31. European Parliament and Council, 1994. Directive 94/62/EC on packaging and packaging waste. Official Journal L 365, 31 December, pp. 10–23.
    Paper not yet in RePEc: Add citation now
    
32. European Parliament and Council, 2012b. Directive 2012/18/EU on the control of major-accident hazards involving dangerous substances, amending and subsequently repealing Council Directive 96/82/EC. Official Journal L 197, 24 July, pp. 1–37.
    Paper not yet in RePEc: Add citation now
    
33. European Parliament and Council, 2018a. Directive (EU) 2018/849 amending Directives 2000/53/EC on end-of-life vehicles, 2006/66/EC on batteries and accumulators and waste batteries and accumulators, and 2012/19/EU on waste electrical and electronic equipment. PE/9/2018/REV/1, 30 May.
    Paper not yet in RePEc: Add citation now
    
34. European Parliament and Council, 2019. Directive (EU) 2019/904 on the reduction of the impact of certain plastic products on the environment. Official Journal L 155, 12 June, pp. 1–19.
    Paper not yet in RePEc: Add citation now
    
35. Eurostat Waste Statistics -electrical and Electronic Equipment. 2023 :
    Paper not yet in RePEc: Add citation now
    
36. Fleck, A. The Carbon Footprint of Your Devices. 2024 Statista:
    Paper not yet in RePEc: Add citation now
    

37. Geng, J. ; Hao, H. ; Sun, X. ; Xun, D. ; Liu, Z. ; Zhao, F. Static material flow analysis of neodymium in China. 2021 J. Ind. Ecol.. 25 114-124

38. Goodenough, K.M. ; Wall, F. ; Merriman, D. The rare earth elements: demand, global resources, and challenges for resourcing future generations. 2018 Nat. Resour. Res.. 27 201-216
    Paper not yet in RePEc: Add citation now
    

39. Graedel, T.E. ; Allwood, J. ; Birat, J.P. ; Buchert, M. ; Hagelüken, C. ; Reck, B.K. ; Sibley, S.F. ; Sonnemann, G. What do we know about metal recycling rates?. 2011 J. Ind. Ecol.. 15 355-366

40. Hagelüken, C. Recycling of (critical) metals. 2014 En : Gunn, G. Critical Metals Handbook. John Wiley & Sons: UK
    Paper not yet in RePEc: Add citation now
    
41. Hagelüken, C. ; Drielsmann, R. ; Van den Broeck, K. Availability of metals and materials. 2012 En : Precious Materials Handbook (Hanau-Wolfgang, Germany: Umicore AG Co. KG.). :
    Paper not yet in RePEc: Add citation now
    
42. Hartley, K. ; van Santen, R. ; Kirchherr, J. Policies for transitioning towards a circular economy: expectations from the European Union (EU). 2020 Resour. Conserv. Recycl.. 155 -
    Paper not yet in RePEc: Add citation now
    
43. Head, B.W. Wicked Problems in Public Policy: Understanding and Responding to Complex Challenges. 2022 Palgrave Macmillan: Australia
    Paper not yet in RePEc: Add citation now
    
44. Hool, A. ; Helbig, C. ; Wierink, G. Challenges and opportunities of the European critical raw materials act. 2023 Mineral Economics. 1-8
    Paper not yet in RePEc: Add citation now
    
45. Huang, K. ; Guo, J. ; Xu, Z. Recycling of waste printed circuit boards: a review of current technologies and treatment status in China. 2009 J. Hazard Mater.. 164 399-408
    Paper not yet in RePEc: Add citation now
    
46. Huisman, J. ; Leroy, P. ; Tetre, F. ; Söderman, M.L. ; Chancerel, P. ; Cassard, D. ; Løvik, A.N. ; Wägner, P. ; Kushnir, D. ; Rotter, V.S. ; Mählitz, P. ; Herreras, L. ; Emmerick, J. ; Hallberg, A. ; Habib, H. ; Wagner, M. ; Downes, S. Prospecting Secondary Raw Materials in the Urban Mine and Mining Wastes (ProSUM). 2017 :
    Paper not yet in RePEc: Add citation now
    
47. Jowitt, S.M. Chapter 3 – renewable energy and associated technologies and the scarcity of metal. 2023 En : Living with Climate Change. Elsevier:
    Paper not yet in RePEc: Add citation now
    

48. Kleijn, R. ; Van der Voet, E. Resource constraints in a hydrogen economy based on renewable energy sources: an exploration. 2010 Renew. Sustain. Energy Rev.. 14 2784-2795

49. Li, F.Q. ; Wang, P. ; Chen, W. ; Chen, W.Q. ; Wen, B.J. ; Dai, T. Exploring recycling potential of rare, scarce, and scattered metals: present status and future directions. 2022 Sustain. Prod. Consum.. 30 988-1000
    Paper not yet in RePEc: Add citation now
    
50. Lixandru, A. ; Venkatesan, P. ; Jönsson, C. ; Poenaru, I. ; Hall, B. ; Yang, Y. ; Walton, A. ; Güth, K. ; Gauß, R. ; Gutfleisch, O. Identification and recovery of rare-earth permanent magnets from waste electrical and electronic equipment. 2017 Waste Manag.. 68 482-489
    Paper not yet in RePEc: Add citation now
    
51. Masterson, V. This Company Recycles Gold from Electronic Waste. 2021 World Economic Forum:
    Paper not yet in RePEc: Add citation now
    
52. Muench, S. ; Stoermer, E. ; Jensen, K. ; Asikainen, T. ; Salvi, M. ; Scapolo, F. Towards a Green and Digital Future, EUR 31075 EN. 2022 Publications Office of the European Union: Luxembourg
    Paper not yet in RePEc: Add citation now
    
53. Official Journal of the European Union 2024. Regulation (EU) 2024/1781. 2024 European Parliament and Council of the European Union:
    Paper not yet in RePEc: Add citation now
    
54. Official Journal of the European Union Decision (EU) 2022/2481 of the European parliament and of the council of 14 december 2022 establishing the digital decade policy Programme 2030. 2022 Off. J. Eur. Union L. 323-324
    Paper not yet in RePEc: Add citation now
    
55. Proske, M. ; Clemm, C. ; Richter, N. Life Cycle Assessment of the Fairphone 2. Fraunhofer Report, 2016. 2016 :
    Paper not yet in RePEc: Add citation now
    
56. Ragnarsdóttir, K.V. Rare metals getting rarer. 2008 Nat. Geosci.. 1 720-721
    Paper not yet in RePEc: Add citation now
    
57. Reck, B.K. ; Graedel, T.E. Challenges in metal recycling. 2012 Science. 337 690-695
    Paper not yet in RePEc: Add citation now
    
58. Sinha, D. Why Was Google Project Ara Cancelled?. 2021 :
    Paper not yet in RePEc: Add citation now
    
59. Talens Peiró, L. ; Nuss, P. ; Mathieux, F. ; Blengini, G. Towards Recycling Indicators Based on EU Flows and Raw Materials System Analysis Data, EUR 29435 EN. 2018 Publications Office of the European Union: Luxembourg
    Paper not yet in RePEc: Add citation now
    
60. Wall, F. Rare earth elements. 2014 En : Gunn, A.G. Critical Metals Handbook. Wiley:
    Paper not yet in RePEc: Add citation now
    
61. Zhang, S. ; Din, Y. ; Liu, B. ; Pan, D. ; Chang, C. ; Volinsky, A. Challenges in legislation, recycling system and technical system of waste electrical and electronic equipment in China. 2015 Waste Manag.. 45 361-373
    Paper not yet in RePEc: Add citation now
    

1. Linking smart manufacturing technologies and sustainable corporate performance: evidence from emerging economy. (2025). Le, Hong Chau.
   In: Operations Management Research.
   RePEc:spr:opmare:v:18:y:2025:i:1:d:10.1007_s12063-024-00525-w.

   Full description at Econpapers || Download paper

2. A novel AI-driven approach to greenwashing: breakthroughs in the future fit between domain-specific Islamic enterprises with varying developmental progress and ESG landscapes. (2025). Asl, Mahdi Ghaemi.
   In: Future Business Journal.
   RePEc:spr:futbus:v:11:y:2025:i:1:d:10.1186_s43093-025-00497-8.

   Full description at Econpapers || Download paper

3. Collaborative approaches in sustainable and resilient manufacturing. (2024). Graa, Paula ; Rocha, Andre Dionisio ; Camarinha-Matos, Luis M.
   In: Journal of Intelligent Manufacturing.
   RePEc:spr:joinma:v:35:y:2024:i:2:d:10.1007_s10845-022-02060-6.

   Full description at Econpapers || Download paper

4. The potential of smart factories in reducing environmental emissions: the evidence from Chinese listed manufacturing firms. (2024). Liu, Weihua ; Lan, Rui ; Hou, Jiahe ; Chan, Hing Kai ; Yuan, Chaolun ; Cheng, Yang.
   In: Palgrave Communications.
   RePEc:pal:palcom:v:11:y:2024:i:1:d:10.1057_s41599-024-03623-z.

   Full description at Econpapers || Download paper

5. Analysis of critical raw materials policy for electrical and electronic equipment: Planning for a truly circular economy. (2024). Slezak, P ; Vafeas, N A ; Hitzman, M W.
   In: Resources Policy.
   RePEc:eee:jrpoli:v:99:y:2024:i:c:s0301420724007475.

   Full description at Econpapers || Download paper

6. Assessment of Smart Transformation in the Manufacturing Process of Aerospace Components Through a Data-Driven Approach. (2023). Gaudenzi, Paolo ; Bernabei, Margherita ; Eugeni, Marco ; Costantino, Francesco.
   In: Global Journal of Flexible Systems Management.
   RePEc:spr:gjofsm:v:24:y:2023:i:1:d:10.1007_s40171-022-00328-7.

   Full description at Econpapers || Download paper

7. Smart manufacturing as a strategic tool to mitigate sustainable manufacturing challenges: a case approach. (2023). Bai, Chunguang ; Gholipour, Parvaneh ; Kannan, Devika.
   In: Annals of Operations Research.
   RePEc:spr:annopr:v:331:y:2023:i:1:d:10.1007_s10479-023-05472-6.

   Full description at Econpapers || Download paper

8. Towards Sustainability Assessment of the Built Environment: A Classification of the Existing Challenges. (2023). Aste, Niccolo ; Lavagna, Monica ; Toosi, Hashem Amini ; Leonforte, Fabrizio ; del Pero, Claudio.
   In: Sustainability.
   RePEc:gam:jsusta:v:15:y:2023:i:15:p:12055-:d:1211879.

   Full description at Econpapers || Download paper

9. Influential Factors, Enablers, and Barriers to Adopting Smart Technology in Rural Regions: A Literature Review. (2023). Pileggi, Salvatore Flavio ; Alabdali, Salem Ahmed ; Cetindamar, Dilek.
   In: Sustainability.
   RePEc:gam:jsusta:v:15:y:2023:i:10:p:7908-:d:1144932.

   Full description at Econpapers || Download paper

10. Impacts of Digital Technologies for the Provision of Energy Market Services on the Safety of Residents and Consumers. (2022). Strielkowski, Wadim ; Efimtseva, Tatiana ; Kovaleva, Olga.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:5:p:2934-:d:762828.

    Full description at Econpapers || Download paper

11. Sustainable Manufacturing for a Circular Economy. (2022). Lee, Joosung ; Kazakova, Elena.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:24:p:17010-:d:1007841.

    Full description at Econpapers || Download paper

12. Research on the Construction and Measurement of the HQDMI Evaluation Index System—A Case Study of China. (2022). Su, Yongqiang ; Zhang, Manman ; Shi, Jinfa.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:22:p:15364-:d:977159.

    Full description at Econpapers || Download paper

13. Sustainability and Industry 4.0: Definition of a Set of Key Performance Indicators for Manufacturing Companies. (2022). Peruzzini, Margherita ; Contini, Giuditta.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:17:p:11004-:d:905682.

    Full description at Econpapers || Download paper

14. Dynamic Evaluation and Spatial Characteristics of Smart Manufacturing Capability in China. (2022). Li, Zhenyan ; Ji, Yanli ; Wang, Xian ; Xue, Jie.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:17:p:10733-:d:900565.

    Full description at Econpapers || Download paper

15. A Two-Step Fuzzy MCDM Method for Implementation of Sustainable Precision Manufacturing: Evidence from China. (2022). Guan, Xiaowei ; Zhao, Jun.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:13:p:8085-:d:854103.

    Full description at Econpapers || Download paper

16. A Sustainable Productive Method for Enhancing Operational Excellence in Shop Floor Management for Industry 4.0 Using Hybrid Integration of Lean and Smart Manufacturing: An Ingenious Case Study. (2022). Ul, Waqas ; Saleem, Waqas ; Tripathi, Varun ; Singh, Sunpreet ; Chattopadhyaya, Somnath ; Sharma, Shubham ; Li, Changhe ; Salah, Bashir ; Mukhopadhyay, Alok Kumar ; Mohamed, Abdullah.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:12:p:7452-:d:841949.

    Full description at Econpapers || Download paper

17. Spatiotemporal Differences and Spatial Spillovers of China’s Green Manufacturing under Environmental Regulation. (2022). Liu, Yujie ; Fang, Yebing ; Wang, Xueyan ; Cao, Weidong ; Tao, Jie ; Wei, Haipeng.
    In: IJERPH.
    RePEc:gam:jijerp:v:19:y:2022:i:19:p:11970-:d:921723.

    Full description at Econpapers || Download paper

18. Industry 4.0 Accelerating Sustainable Manufacturing in the COVID-19 Era: Assessing the Readiness and Responsiveness of Italian Regions. (2021). Spigarelli, Francesca ; Lepore, Dominique ; Micozzi, Alessandra.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:5:p:2670-:d:509123.

    Full description at Econpapers || Download paper

19. Introduction of IoT-Based Surrogate Parameters in the Ex-Post Countermeasure of Industrial Sectors in Integrated Permit Policy. (2021). Kim, Tae Woo ; Kang, Phil Goo ; Seo, Jin Won ; Park, Jaehong ; Seok, Heejeong.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:23:p:13466-:d:695811.

    Full description at Econpapers || Download paper

20. Smart Sustainable City Manufacturing and Logistics: A Framework for City Logistics Node 4.0 Operations. (2021). Dzhuguryan, Tygran ; Ulewicz, Robert ; Konradi, Oleg ; Deja, Agnieszka.
    In: Energies.
    RePEc:gam:jeners:v:14:y:2021:i:24:p:8380-:d:700863.

    Full description at Econpapers || Download paper

21. CSR, Co-Creation and Green Consumer Loyalty: Are Green Banking Initiatives Important? A Moderated Mediation Approach from an Emerging Economy. (2020). Fu, Qinghua ; Ahmad, Naveed ; Rabbani, Mustafa Raza ; Sial, Muhammad Safdar ; Zia-Ud, Malik ; Sun, Huidong ; Cheng, Guping.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:24:p:10688-:d:465936.

    Full description at Econpapers || Download paper

22. The Design of Sustainable City Multi-Floor Manufacturing Processes Under Uncertainty in Supply Chains. (2020). Jowiak, Zofia ; Dzhuguryan, Tygran ; Winicki, Bogusz ; Deja, Agnieszka.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:22:p:9439-:d:444336.

    Full description at Econpapers || Download paper

23. Environmental Analysis of Sustainable and Traditional Cooling and Lubrication Strategies during Machining Processes. (2020). Imad, Mohamd ; Hegab, Hussien ; Kishawy, Hossam A ; Hopkins, Connor ; Darras, Basil ; Salem, Amr.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:20:p:8462-:d:427887.

    Full description at Econpapers || Download paper

24. Competitive Priorities, Employee Management and Development and Sustainable Manufacturing Performance in Asian Organizations. (2020). Ractham, Peter ; Ahmed, Pervaiz K ; Teh, Pei-Lee ; Atay, Erhan ; Adebanjo, Dotun.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:13:p:5335-:d:379100.

    Full description at Econpapers || Download paper

Report date: 2025-10-02 21:57:54 || Missing content? Let us know