This document has not been cited yet.

1. Abbass, W.; Khan, M.I.; Mourad, S. Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete. Constr. Build. Mater. 2018, 168, 556–569. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
2. Akinshilo, A.T.; Davodi, A.G.; Rezazadeh, H.; Sobamowo, G.; Tunç, C. Heat transfer and flow of mhd micropolarnanofluid through the porous walls, magnetic fields and thermal radiation. Palest. J. Math. 2022, 11, 604–616.
   Paper not yet in RePEc: Add citation now
   
3. Al-Asad, F.; Alam, N.; Tunç, C.; Sarker, M.M.A. Heat Transport Exploration of Free Convection Flow inside Enclosure Having Vertical Wavy Walls. J. Appl. Comput. Mech. 2021, 7, 520–527. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
4. Al-Tayeb, M.M.; Bakar, B.H.A.; Akil, H.M.; Ismail, H. Performance of rubberized and hybrid rubberized concrete structures under static and impact load conditions. Exp. Mech. 2013, 53, 377–384. [CrossRef]
   Paper not yet in RePEc: Add citation now
   

5. Alhawari, O.; Awan, U.; Bhutta, M.K.S.; Ülkü, M.A. Insights from Circular Economy Literature: A Review of Extant Definitions and Unravelling Paths to Future Research. Sustainability 2021, 13, 859. [CrossRef]

6. Bakar, B.A.; Noaman, A.T.; Akil, H.M. Cumulative effect of crumb rubber and steel fiber on the flexural toughness of concrete. Eng. Technol. Appl. Sci. Res. 2017, 7, 1345–1352. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
7. Bissonnette, B.; Courard, L.; Fowler, D.W.; Granju, J.-L. Bonded Cement-Based Material Overlays for the Repair, the Lining or the Strengthening of Slabs or Pavements: State-of-the-Art Report of the RILEM Technical Committee 193-RLS; Springer Science & Business Media: Berlin/Heidelberg, Germany, 2011; Volume 3.
   Paper not yet in RePEc: Add citation now
   
8. Bu, C.; Zhu, D.; Liu, L.; Lu, X.; Sun, Y.; Yan, Z.; Yu, L.; Wei, Q. A Study on the Mechanical Properties and Microcosmic Mechanism of Basalt Fiber Modified Rubber Ceramsite Concrete. Buildings 2022, 12, 103. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
9. Centonze, G.; Leone, M.; Aiello, M.A. Steel fibers from waste tires as reinforcement in concrete: A mechanical characterization. Constr. Build. Mater. 2012, 36, 46–57. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
10. Garbacz, A.; Courard, L.; Kostana, K. Characterization of concrete surface roughness and its relation to adhesion in repair systems. Mater. Charact. 2006, 56, 281–289. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
11. Gillani, S.A.A. Degradation of the Residual Strength of Concrete: Effect of Fiber-Reinforcement and of Rubber Aggregates, Application to Thin Bonded Cement-Based Overlays. Ph.D. Thesis, Université Toulouse III-Paul Sabatier, Toulouse, France, 2017.
    Paper not yet in RePEc: Add citation now
    
12. Gillani, S.A.A.; Riaz, M.R.; Hameed, R.; Qamar, A.; Toumi, A.; Turatsinze, A. Fracture energy of fiber-reinforced and rubberized cement-based composites: A sustainable approach towards recycling of waste scrap tires. Energy Environ. 2022, 0958305X221089223. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
13. Gillani, S.A.A.; Shahzad, S.; Abbass, W.; Abbas, S.; Toumi, A.; Turatsinze, A.; Mohamed, A.M.; Sayed, M.M. Debonding of Thin Bonded Rubberised Fibre-Reinforced Cement-Based Repairs under Monotonic Loading: Experimental and Numerical Investigation. Materials 2022, 15, 3886. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
14. Gillani, S.A.A.; Shahzad, S.; Toumi, A.; Turatsinze, A. Debonding of rubberised fibre-reinforced cement-based repairs under fatigue loading: Experimental study and numerical modelling. Int. J. Pavement Eng. 2021, 1–17. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
15. Gillani, S.A.A.; Shakir, A.S.; Toumi, A.; Turatsinze, A. Fiber-Reinforced and Rubberized Cement-Based Composite: A Sustainable Repair Material for Thin Bonded Overlays. 2017. Available online: https://scholar.google.com/citations?view_op=view_ citation&hl=en&user=w8Ca5HIAAAAJ&sortby=pubdate&citation_for_view=w8Ca5HIAAAAJ:WF5omc3nYNoC (accessed on 18 June 2022).
    Paper not yet in RePEc: Add citation now
    
16. Gillani, S.A.A.; Toumi, A.; Turatsinze, A. Cyclic bridging law of steel fibre-reinforced and rubberised cement-based materials. Eur. J. Environ. Civ. Eng. 2020, 26, 1336–1348. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
17. Gillani, S.A.A.; Toumi, A.; Turatsinze, A. Effect of incorporating rubber aggregates and fiber reinforcement on the durability of thin bonded cement-based overlays. In Proceedings of the 8th RILEM International Conference on Mechanisms of Cracking and Debonding in Pavements, Nantes, France, 7–9 June 2016; pp. 619–625.
    Paper not yet in RePEc: Add citation now
    
18. Gillani, S.A.A.; Toumi, A.; Turatsinze, A. Effect of surface preparation of substrate on bond tensile strength of thin bonded cement-based overlays. Int. J. Pavement Res. Technol. 2020, 13, 197–204. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
19. Granju, J.L. Thin bonded overlays: About the role of fiber reinforcement on the limitation of their debonding. Adv. Cem. Based Mater. 1996, 4, 21–27. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
20. Hasani, M.; Nejad, F.M.; Sobhani, J.; Chini, M. Mechanical and durability properties of fiber reinforced concrete overlay: Experimental results and numerical simulation. Constr. Build. Mater. 2020, 268, 121083. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
21. Ismail, M.K.; Hassan, A.A. An experimental study on flexural behaviour of large-scale concrete beams incorporating crumb rubber and steel fibres. Eng. Struct. 2017, 145, 97–108. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
22. Issa, C.A.; Salem, G. Utilization of recycled crumb rubber as fine aggregates in concrete mix design. Constr. Build. Mater. 2013, 42, 48–52. [CrossRef]
    Paper not yet in RePEc: Add citation now
    

23. Khan, H.; Gómez-Aguilar, J.F.; Khan, A.; Khan, T.S. Stability analysis for fractional order advection–reaction diffusion system. Phys. A Stat. Mech. Appl. 2019, 521, 737–751. [CrossRef]

24. Khan, M.; Cao, M.; Xie, C.; Ali, M. Effectiveness of hybrid steel-basalt fiber reinforced concrete under compression. Case Stud. Constr. Mater. 2022, 16, e00941. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
25. Lee, J.W.; Jang, Y.I.; Park, W.S.; Kim, S.W. A study on mechanical properties of porous concrete using cementless binder. Int. J. Concr. Struct. Mater. 2016, 10, 527–537. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
26. Marques, A.M.; Correia, J.R.; de Brito, J. Post-fire residual mechanical properties of concrete made with recycled rubber aggregate. Fire Saf. J. 2013, 58, 49–57. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
27. Mehta, P.K. Concrete. Structure, Properties and Materials; Prentice-Hall: Englewood Cliffs, NJ, USA, 1986; Available online: https://trid.trb.org/view/273357 (accessed on 19 May 2022).
    Paper not yet in RePEc: Add citation now
    
28. Meshgin, P.; Xi, Y.; Li, Y. Utilization of phase change materials and rubber particles to improve thermal and mechanical properties of mortar. Constr. Build. Mater. 2012, 28, 713–721. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
29. Miller, N.M.; Tehrani, F.M. Mechanical properties of rubberized lightweight aggregate concrete. Constr. Build. Mater. 2017, 147, 264–271. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
30. Mirmoghtadaei, R.; Mohammadi, M.; Samani, N.A.; Mousavi, S. The impact of surface preparation on the bond strength of repaired concrete by metakaolin containing concrete. Constr. Build. Mater. 2015, 80, 76–83. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
31. Nayar, S.K.; Gettu, R. Synergy in toughness by incorporating amorphous metal and steel fibers. ACI Mater. J. 2015, 112, 821–827. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
32. Nguyen, T.H.; Toumi, A.; Turatsinze, A. Mechanical properties of steel fibre reinforced and rubberised cement-based mortars. Mater. Des. 2010, 31, 641–647. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
33. Noaman, A.T.; Bakar, B.A.; Akil, H.M. Experimental investigation on compression toughness of rubberized steel fibre concrete. Constr. Build. Mater. 2016, 115, 163–170. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
34. Noaman, A.T.; Bakar, B.A.; Akil, H.M. The effect of combination between crumb rubber and steel fiber on impact energy of concrete beams. Procedia Eng. 2015, 125, 825–831. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
35. Noaman, A.T.; Bakar, B.A.; Akil, H.M.; Alani, A.H. Fracture characteristics of plain and steel fibre reinforced rubberized concrete. Constr. Build. Mater. 2017, 152, 414–423. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
36. Noaman, A.T.; Bakar, B.H.A.; Akil, H.M. Investigation on the mechanical properties of rubberized steel fiber concrete. Eng. Struct. Technol. 2017, 9, 79–92. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
37. Sabah, S.A.; Hassan, M.H.; Bunnori, N.M.; Johari, M.M. Bond strength of the interface between normal concrete substrate and GUSMRC repair material overlay. Constr. Build. Mater. 2019, 216, 261–271. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
38. Shilar, F.A.; Ganachari, S.V.; Patil, V.B.; Khan, T.M.Y.; Khadar, S.D.A. Molarity activity effect on mechanical and microstructure properties of geopolymer concrete: A review. Case Stud. Constr. Mater. 2022, 16, e01014. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
39. Tayeh, B.A.; Bakar, B.H.A.; Johari, M. Characterization of the interfacial bond between old concrete substrate and ultra high performance fiber concrete repair composite. Mater. Struct. 2012, 46, 743–753. [CrossRef] Sustainability 2022, 14, 8226 22 of 22
    Paper not yet in RePEc: Add citation now
    
40. Toumi, A.; Nguyen, T.-H.; Turatsinze, A. Debonding of a thin rubberised and fibre-reinforced cement-based repairs: Analytical and experimental study. Mater. Des. 2013, 49, 90–95. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
41. Toumi, A.; Nguyen, T.-H.; Turatsinze, A. Modelling of the debonding of steel fibre reinforced and rubberised cement-based overlays under fatigue loading. Eur. J. Environ. Civ. Eng. 2015, 19, 672–686. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
42. Tran, Q.-T.; Toumi, A.; Turatsinze, A. Thin bonded cement-based overlays: Numerical analysis of factors influencing their debonding under fatigue loading. Mater. Struct. 2007, 41, 951–967. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
43. Tran, Q.T.; Toumi, A.; Granju, J.-L. Experimental and numerical investigation of the debonding interface between an old concrete and an overlay. Mater. Struct. 2006, 39, 379–389. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
44. Turatsinze, A.; Bonnet, S.; Granju, J.-L. Mechanical characterisation of cement-based mortar incorporating rubber aggregates from recycled worn tyres. Build. Environ. 2005, 40, 221–226. [CrossRef] Sustainability 2022, 14, 8226 21 of 22
    Paper not yet in RePEc: Add citation now
    
45. Turatsinze, A.; Measson, M.; Faure, J.-P. Rubberised concrete: From laboratory findings to field experiment validation. Int. J. Pavement Eng. 2016, 19, 883–892. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
46. Vandewalle, L.; Nemegeer, D.; Balazs, L.; di Prisco, M. Rilem TC 162-TDF: Test and design methods for steel fibre reinforced concrete: Uni-axial tension test for steel fibre reinforced concrete. Mater. Struct. Mater. Constr. 2001, 34, 3–6.
    Paper not yet in RePEc: Add citation now
    

1. Tweeting Circular Economy: Unveiling Current Discourse Through Natural Language Processing. (2025). Saleh, Arif Rahman ; Fitriyani, Norma Latif ; Syafrudin, Muhammad ; Hutahaean, Michael ; Maarif, Muhammad Rifqi ; Pratama, Arif Budy.
   In: Sustainable Development.
   RePEc:wly:sustdv:v:33:y:2025:i:3:p:3888-3905.

   Full description at Econpapers || Download paper

2. Measuring the circular economy in Europe: Big differences among countries, great opportunities to converge. (2024). Poza, Carlos ; Claudioquiroga, Gloria.
   In: Sustainable Development.
   RePEc:wly:sustdv:v:32:y:2024:i:5:p:4707-4725.

   Full description at Econpapers || Download paper

3. Designing an optimal multi-objective model for a sustainable closed-loop supply chain: a case study of pomegranate in Iran. (2024). Mostafaeipour, Ali ; Fakhrzad, Mohammad Bagher ; Gholipour, Ansar ; Sadegheih, Ahmad.
   In: Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development.
   RePEc:spr:endesu:v:26:y:2024:i:2:d:10.1007_s10668-022-02868-5.

   Full description at Econpapers || Download paper

4. Are technology innovation and circular economy remedy for emissions? Evidence from the Netherlands. (2024). Khan, Khalid ; Khurshid, Adnan.
   In: Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development.
   RePEc:spr:endesu:v:26:y:2024:i:1:d:10.1007_s10668-022-02766-w.

   Full description at Econpapers || Download paper

5. Coordination mechanisms of closed-loop supply chain under cap-and-trade policy. (2024). Huang, Yanting ; Lu, Ying.
   In: Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development.
   RePEc:spr:endesu:v:26:y:2024:i:1:d:10.1007_s10668-022-02762-0.

   Full description at Econpapers || Download paper

6. Buyer–supplier partnerships and circular economy performance in food supply chains: Serial mediation by commitment contract and innovation performance. (2024). Bag, Surajit ; Kilbourn, Peter ; Mishra, Nishikant ; Rahman, Muhammad Sabbir ; Srivastava, Gautam.
   In: Business Strategy and the Environment.
   RePEc:bla:bstrat:v:33:y:2024:i:2:p:1247-1264.

   Full description at Econpapers || Download paper

7. The Geopolitical Risk and Strategic Uncertainty of Green Growth after the Ukraine Invasion: How the Circular Economy Can Decrease the Market Power of and Resource Dependency on Critical Minerals. (2023). Nygaard, Arne.
   In: Circular Economy and Sustainability.
   RePEc:spr:circec:v:3:y:2023:i:2:d:10.1007_s43615-022-00181-x.

   Full description at Econpapers || Download paper

8. Navigating Sustainability: Unveiling Responsible Consumption and Production in Developing Economies for SDG 12 Achievement. (2023). Yeboah, Samuel.
   In: MPRA Paper.
   RePEc:pra:mprapa:118214.

   Full description at Econpapers || Download paper

9. Combining GRA with a Fuzzy QFD Model for the New Product Design and Development of Wickerwork Lamps. (2023). Wang, Tianxiong ; Yang, Liu.
   In: Sustainability.
   RePEc:gam:jsusta:v:15:y:2023:i:5:p:4208-:d:1080914.

   Full description at Econpapers || Download paper

10. Sustainable Supply Chain Risk Management in a Climate-Changed World: Review of Extant Literature, Trend Analysis, and Guiding Framework for Future Research. (2023). Yi, Nam ; Ulku, Ali M.
    In: Sustainability.
    RePEc:gam:jsusta:v:15:y:2023:i:17:p:13199-:d:1231539.

    Full description at Econpapers || Download paper

11. Investigating the Serially Mediating Mechanisms of Organizational Ambidexterity and the Circular Economy in the Relationship between Ambidextrous Leadership and Sustainability Performance. (2023). Kafetzopoulos, Dimitrios ; Vayona, Anastasia ; Katou, Anastasia A.
    In: Sustainability.
    RePEc:gam:jsusta:v:15:y:2023:i:10:p:7937-:d:1145455.

    Full description at Econpapers || Download paper

12. Industrial perspective regarding circular economy activities in Atlántico-Colombia. (2023). Marenco, Sandra Villa ; Alvarado-Bawab, Mara Bernarda.
    In: Economia agro-alimentare.
    RePEc:fan:ecaqec:v:html10.3280/ecag2023oa14669.

    Full description at Econpapers || Download paper

13. Industrial perspective regarding circular economy activities in Atlántico-Colombia. (2023). Marenco, Sandra Villa ; Alvarado-Bawab, Maria Bernarda.
    In: Economia agro-alimentare / Food Economy.
    RePEc:ags:sieaea:335249.

    Full description at Econpapers || Download paper

14. An Evaluation of Circular Economy Development in the Baltic States. (2022). Viktorija, Skvarciany ; Ugnius, Jakubelskas.
    In: Folia Oeconomica Stetinensia.
    RePEc:vrs:foeste:v:22:y:2022:i:2:p:193-208:n:11.

    Full description at Econpapers || Download paper

15. Green product design in a supply chain with considering marketing under competition and coordination. (2022). Jolai, Fariborz ; Taleizadeh, Ata Allah ; Fadavi, Ahmad.
    In: Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development.
    RePEc:spr:endesu:v:24:y:2022:i:10:d:10.1007_s10668-021-01917-9.

    Full description at Econpapers || Download paper

16. Self-organising for a transition towards a circular society: Insight from Follettian thinking. (2022). Savy, Anne-Claire.
    In: Post-Print.
    RePEc:hal:journl:hal-04302326.

    Full description at Econpapers || Download paper

17. Sustainable Production Clauses and Positioning in the Global Value Chain: An Analysis of International Investment Agreements (IIA) of the ICT Industry in Developing and Developed Markets. (2022). Cao, Yuliang ; Meng, QI ; Mohiuddin, Muhammad.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:4:p:2396-:d:753465.

    Full description at Econpapers || Download paper

18. A Framework to Evaluate the Social Life Cycle Impact of Products under the Circular Economy Thinking. (2022). Tsalis, Thomas ; Nikolaou, Ioannis ; Stefanakis, Alexandros I.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:4:p:2196-:d:749676.

    Full description at Econpapers || Download paper

19. Bioeconomy and Circular Economy Approaches Need to Enhance the Focus on Biodiversity to Achieve Sustainability. (2022). Stephenson, P J ; Damerell, Anca.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:17:p:10643-:d:898470.

    Full description at Econpapers || Download paper

20. Digital Technology Deployment and the Circular Economy. (2022). Jones, Peter ; Wynn, Martin.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:15:p:9077-:d:870749.

    Full description at Econpapers || Download paper

21. Mechanical Performance of Amorphous Metallic Fiber-Reinforced and Rubberized Thin Bonded Cement-Based Overlays. (2022). Abbass, Wasim ; Ali, Syed Asad ; Hameed, Rashid ; Riaz, Muhammad Rizwan ; Javed, Ayesha ; Deifalla, Ahmed Farouk ; Salmi, Abdelatif.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:13:p:8226-:d:856471.

    Full description at Econpapers || Download paper

22. Designing Value Chains for Industry 4.0 and a Circular Economy: A Review of the Literature. (2022). Awan, Usama ; Sroufe, Robert ; Bozan, Karoly.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:12:p:7084-:d:835020.

    Full description at Econpapers || Download paper

23. Transportation-Induced Carbon Emissions Jeopardize Healthcare Logistics Sustainability: Toward a Healthier Today and a Better Tomorrow. (2022). Handayani, Wiwik ; Awan, Usama ; Anser, Muhammad Khalid ; Jabor, Mohd Khata ; Zaman, Khalid ; Subari, Kamalularifin ; Salamun, Hailan ; Abdul, Abdul Rashid.
    In: Logistics.
    RePEc:gam:jlogis:v:6:y:2022:i:2:p:27-:d:794702.

    Full description at Econpapers || Download paper

24. Circular Economy Models in Industry: Developing a Conceptual Framework. (2022). Marinina, Oksana ; Kirsanova, Natalia ; Nevskaya, Marina.
    In: Energies.
    RePEc:gam:jeners:v:15:y:2022:i:24:p:9376-:d:1000143.

    Full description at Econpapers || Download paper

25. Evaluating the Transition of the European Union Member States towards a Circular Economy. (2022). Nazarko, Ukasz ; Chodakowska, Ewa.
    In: Energies.
    RePEc:gam:jeners:v:15:y:2022:i:11:p:3924-:d:824480.

    Full description at Econpapers || Download paper

26. DEVELOPMENT OF THEORETICAL APPROACHES OF CIRCULAR BUSINESS MODELS. (2022). Ungur, Cristina.
    In: Contemporary Economy Journal.
    RePEc:brc:brccej:v:7:y:2022:i:2:p:55-62.

    Full description at Econpapers || Download paper

27. Corporate social responsibility strategy, sustainable product attributes, and export performance. (2021). Ullah, Zeeshan ; Puhakka, Vesa ; Arslan, Ahmad.
    In: Corporate Social Responsibility and Environmental Management.
    RePEc:wly:corsem:v:28:y:2021:i:6:p:1840-1853.

    Full description at Econpapers || Download paper

28. Minimizing the Makespan in Flowshop Scheduling for Sustainable Rubber Circular Manufacturing. (2021). Wei, Ying-Chieh ; Cheng, Yi-Lung ; Huang, Ya-Lin ; Day, Rong-Fuh ; Yin, Peng-Yeng.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:5:p:2576-:d:507510.

    Full description at Econpapers || Download paper

29. Greening Factor Framework Integrating Sustainability, Green Supply Chain Management, and Circular Economy: The Chilean Case. (2021). Isbej, Jose A ; Tapia-Ubeda, Francisco J ; Polanco-Lahoz, Diego A.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:24:p:13575-:d:697743.

    Full description at Econpapers || Download paper

30. Development of an Industry 4.0-Based Analytical Method for the Value Stream Centered Optimization of Demand-Driven Warehousing Systems. (2021). Skapinyecz, Robert ; Tamas, Peter ; Dobos, Peter ; Illes, Bela ; Cservenak, Akos.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:21:p:11914-:d:666776.

    Full description at Econpapers || Download paper

31. Remanufacturing for Circular Economy: Understanding the Impact of Manufacturer’s Incentive under Price Competition. (2021). Tripathy, Sushanta ; Aich, Satyabrata ; Jena, Sarat Kumar ; Kim, Hee-Cheol ; Singhal, Deepak.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:21:p:11839-:d:665260.

    Full description at Econpapers || Download paper

32. Exploring Barriers for Circularity in the EU Furniture Industry. (2021). Sales-Vivo, Vicente ; Costi, Micol ; Silvius, Gilbert ; Ismayilova, Aydan.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:19:p:11072-:d:651154.

    Full description at Econpapers || Download paper

33. PLM Solutions in the Process of Supporting the Implementation and Maintenance of the Circular Economy Concept in Manufacturing Companies. (2021). Cholewa, Mariusz ; Ba, Luan Huynh.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:19:p:10589-:d:642057.

    Full description at Econpapers || Download paper

34. Re-Commerce to Ensure Circular Economy from Consumer Perspective. (2021). , Saleh ; Mark-Herbert, Cecilia.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:18:p:10242-:d:634977.

    Full description at Econpapers || Download paper

35. Transitional Pathways towards Achieving a Circular Economy in the Water, Energy, and Food Sectors. (2021). Mabhaudhi, Tafadzwanashe ; Mpandeli, Sylvester ; Liphadzi, Stanley ; Lottering, Shenelle ; Nhamo, Luxon ; Naidoo, Dhesigen ; Trois, Cristina ; Modi, Albert T.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:17:p:9978-:d:630024.

    Full description at Econpapers || Download paper

36. Core Elements towards Circularity: Evidence from the European Countries. (2021). Lingaitien, Olga ; Burinskien, Aurelija.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:16:p:8742-:d:608892.

    Full description at Econpapers || Download paper

37. Technological Innovation and Circular Economy Practices: Business Strategies to Mitigate the Effects of COVID-19. (2021). Ponce, Pablo ; Mahmood, Haider ; Ali, Syed Adeel ; Rehman, Syed Abdul ; Aguirre-Padilla, Nathalie ; Tanveer, Muhammad.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:15:p:8479-:d:604147.

    Full description at Econpapers || Download paper

38. Untapped Aspects of Innovation and Competition within a European Resilient Circular Economy. A Dual Comparative Study. (2021). Bucea-Manea-Tonis, Rocsana ; Evi, Nevenka Popovi ; Ili, Milena P ; Mihoreanu, Larisa.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:15:p:8290-:d:600794.

    Full description at Econpapers || Download paper

39. Design, Materials, and Extrusion-Based Additive Manufacturing in Circular Economy Contexts: From Waste to New Products. (2021). Rognoli, Valentina ; Levi, Marinella ; Romani, Alessia.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:13:p:7269-:d:584623.

    Full description at Econpapers || Download paper

40. Understanding Economic, Social, and Environmental Sustainability Challenges in the Global South. (2021). Sierra, Javier ; Suarez-Collado, Angela.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:13:p:7201-:d:583231.

    Full description at Econpapers || Download paper

41. Assessing Hybrid Solar-Wind Potential for Industrial Decarbonization Strategies: Global Shift to Green Development. (2021). Awan, Usama ; Qazi, Muhammad Moinuddin ; Haffar, Mohamed ; Zaman, Khalid ; Ur, Haroon ; Nassani, Abdelmohsen A.
    In: Energies.
    RePEc:gam:jeners:v:14:y:2021:i:22:p:7620-:d:679397.

    Full description at Econpapers || Download paper

42. Big data analytics capability and decision-making: The role of data-driven insight on circular economy performance. (2021). Khan, Zaheer ; Awan, Usama ; Shariq, Syed Muhammad ; Shamim, Saqib ; Ul, Najam.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:168:y:2021:i:c:s0040162521001980.

    Full description at Econpapers || Download paper

43. Integrating the green economy, circular economy and bioeconomy in a strategic sustainability framework. (2021). Korhonen, J ; D'Amato, D.
    In: Ecological Economics.
    RePEc:eee:ecolec:v:188:y:2021:i:c:s0921800921002019.

    Full description at Econpapers || Download paper

Report date: 2025-10-05 08:17:06 || Missing content? Let us know