1. Fused Filament Fabrication Three-Dimensional Printing: Assessing the Influence of Geometric Complexity and Process Parameters on Energy and the Environment. (2023). Tarlochan, Faris ; Mecheter, Asma.
   In: Sustainability.
   RePEc:gam:jsusta:v:15:y:2023:i:16:p:12319-:d:1216099.

   Full description at Econpapers || Download paper

2. Characterization and Sustainability Potential of Recycling 3D-Printed Nylon Composite Wastes. (2022). Ahmed, Waleed ; Al-Mazrouei, Noura ; Al-Marzouqi, Ali H.
   In: Sustainability.
   RePEc:gam:jsusta:v:14:y:2022:i:17:p:10458-:d:895036.

   Full description at Econpapers || Download paper

1. Abdul-Wahab, S.A.; Chin Fah En, S.; Elkamel, A.; Ahmadi, L.; Yetilmezsoy, K. A review of standards and guidelines set by international bodies for the parameters of indoor air quality. Atmos. Pollut. Res. 2015, 6, 751–767. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
2. Afshar-Mohajer, N.; Wu, C.-Y.; Ladun, T.; Rajon, D.A.; Huang, Y. Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer. Build. Environ. 2015, 93, 293–301. [CrossRef] Sustainability 2022, 14, 2900 22 of 23
   Paper not yet in RePEc: Add citation now
   
3. Asadi, E.; da Silva, M.C.G.; Costa, J.J. A systematic indoor air quality audit approach for public buildings. Environ. Monit. Assess. 2013, 185, 865–875. [CrossRef] [PubMed]
   Paper not yet in RePEc: Add citation now
   

4. Attaran, M. The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing. Bus. Horiz. 2017, 60, 677–688. [CrossRef]

5. Azimi, P.; Fazli, T.; Stephens, B. Predicting Concentrations of Ultrafine Particles and Volatile Organic Compounds Resulting from Desktop 3D Printer Operation and the Impact of Potential Control Strategies: 3D Printer Emissions-Exposure and Control. J. Ind. Ecol. 2017, 21, S107–S119. [CrossRef]

6. Azimi, P.; Zhao, D.; Pouzet, C.; Crain, N.E.; Stephens, B. Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments. Environ. Sci. Technol. 2016, 50, 1260–1268. [CrossRef] [PubMed]
   Paper not yet in RePEc: Add citation now
   

7. Baumers, M.; Duflou, J.R.; Flanagan, W.; Gutowski, T.G.; Kellens, K.; Lifset, R. Charting the Environmental Dimensions of Additive Manufacturing and 3D Printing: Environmental Dimensions of AM. J. Ind. Ecol. 2017, 21, S9–S14. [CrossRef]

8. Byrley, P.; George, B.J.; Boyes, W.K.; Rogers, K. Particle emissions from fused deposition modeling 3D printers: Evaluation and meta-analysis. Sci. Total Environ. 2019, 655, 395–407. [CrossRef] [PubMed]
   Paper not yet in RePEc: Add citation now
   
9. Chan, Y.-J.; Yuan, T.-H.; Sun, H.-C.; Lin, T.-C. Characterization and Exposure Assessment of Odor Emissions from Laser Cutting of Plastics in the Optical Film Industry. Aerosol Air Qual. Res. 2016, 16, 2216–2226. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
10. Chtioui, N.; Raoudha, G.; Benamara, A. Eco-design and Additive Manufacturing: Analysis and proposals. In Proceedings of the 24th Congrès Français de Mécanique, Brest, France, 26–30 August 2019.
    Paper not yet in RePEc: Add citation now
    
11. Deng, Y.; Cao, S.J.; Chen, A.; Guo, Y. The impact of manufacturing parameters on submicron particle emissions from a desktop 3D printer in the perspective of emission reduction. Build. Environ. 2016, 104, 311–319. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
12. Gu, J.; Wensing, M.; Uhde, E.; Salthammer, T. Characterization of particulate and gaseous pollutants emitted during operation of a desktop 3D printer. Environ. Int. 2019, 123, 476–485. [CrossRef] [PubMed]
    Paper not yet in RePEc: Add citation now
    
13. Huang, Y.; Leu, M.C.; Mazumder, J.; Donmez, A. Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations. J. Manuf. Sci. Eng. 2015, 137, 014001. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
14. ISO Standard. ISO 16000 Indoor Air—Part 1: General Aspects of Sampling Strategy. 2004. Available online: https://cobaz.afnor. org/ (accessed on 10 June 2021).
    Paper not yet in RePEc: Add citation now
    
15. John, U.; Matthew, R.C.; Chris, K.; John, J.M. Airborne Emissions of Carcinogens and Respiratory Sensitizers during Thermal Processing of Plastics. Ann. Occup. Hyg. 2013, 57, 399–406. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
16. Khaki, S.; Rio, M.; Marin, P. Monitoring indoor air quality in additive manufacturing environment. Procedia CIRP 2020, 90, 455–460. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
17. Kim, K.-H.; Kabir, E.; Kabir, S. A review on the human health impact of airborne particulate matter. Environ. Int. 2015, 74, 136–143. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
18. Kruth, J.-P.; Leu, M.C.; Nakagawa, T. Progress in Additive Manufacturing and Rapid Prototyping. CIRP Ann. 1998, 47, 525–540. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
19. Leso, V.; Ercolano, M.L.; Mazzotta, I.; Romano, M.; Cannavacciuolo, F.; Iavicoli, I. Three-Dimensional (3D) Printing: Implications for Risk Assessment and Management in Occupational Settings. Ann. Work. Expo. Health 2021, 65, 617–634. [CrossRef] [PubMed]
    Paper not yet in RePEc: Add citation now
    
20. Lunetto, V.; Catalano, A.R.; Priarone, P.C.; Settineri, L. Comments about the Human Health Risks Related to Additive Manufacturing. In Sustainable Design and Manufacturing 2018; Dao, D., Howlett, R.J., Setchi, R., Vlacic, L., Eds.; Springer International Publishing: Cham, Switzerland, 2019; Volume 130, pp. 95–104. ISBN 978-3-030-04289-9.
    Paper not yet in RePEc: Add citation now
    
21. Luomaranta, T.; Martinsuo, M. Supply chain innovations for additive manufacturing. Int. J. Phys. Distrib. Logist. Manag. 2019, 50, 54–79. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
22. Madl, A.K.; Pinkerton, K.E. Health effects of inhaled engineered and incidental nanoparticles. Crit. Rev. Toxicol. 2009, 39, 629–658. [CrossRef] [PubMed]
    Paper not yet in RePEc: Add citation now
    
23. McDonnell, B.; Jimenez Guzman, X.; Dolack, M.; Simpson, T.W.; Cimbala, J.M. 3D Printing in the Wild: A Preliminary Investigation of Air Quality in College Maker Spaces. In Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium— An Additive Manufacturing Conference, Austin, TX, USA, 8–10 August 2016; pp. 2456–2469.
    Paper not yet in RePEc: Add citation now
    

24. Mendes, L.; Kangas, A.; Kukko, K.; Mølgaard, B.; Säämänen, A.; Kanerva, T.; Flores Ituarte, I.; Huhtiniemi, M.; Stockmann-Juvala, H.; Partanen, J.; et al. Characterization of Emissions from a Desktop 3D Printer. J. Ind. Ecol. 2017, 21, S94–S106. [CrossRef]

25. Molhave, L.; Clausen, G.; Berglund, B.; Ceaurriz, J.; Kettrup, A.; Lindvall, T.; Maroni, M.; Pickering, A.C.; Risse, U.; Rothweiler, H.; et al. Total Volatile Organic Compounds (TVOC) in Indoor Air Quality Investigations. Indoor Air 1997, 7, 225–240. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
26. Moylan, S.; Slotwinski, J.; Cooke, A.; Jurrens, K.; Donmez, M. Proposal for a standardized test artifact for additive manufacturing machines and processes. In Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX, USA, 6–8 August 2012.
    Paper not yet in RePEc: Add citation now
    
27. O’Neill, K. Laser-Generated Airborne Contaminants from a Desktop Laser Cutter and Engraver; University of Oklahoma: Norman, OK, USA, 2017.
    Paper not yet in RePEc: Add citation now
    
28. Oberdörster, G.; Oberdörster, E.; Oberdörster, J. Nanotoxicology: An Emerging Discipline Evolving from Studies of Ultrafine Particles. Environ. Health Perspect. 2005, 113, 823–839. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
29. Peters, A.; Wichmann, H.E.; Tuch, T.; Heinrich, J.; Heyder, J. Respiratory effects are associated with the number of ultrafine particles. Am. J. Respir. Crit. Care Med. 1997, 155, 1376–1383. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
30. Rao, C.; Gu, F.; Zhao, P.; Sharmin, N.; Gu, H.; Fu, J. Capturing PM2.5 Emissions from 3D Printing via Nanofiber-based Air Filter. Sci. Rep. 2017, 7, 10366. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
31. Recuerda, M.A. Risk and Reason in the European Union Law. Eur. Food Feed. Law Rev. 2006, 5, 270.
    Paper not yet in RePEc: Add citation now
    
32. Rejeski, D.; Zhao, F.; Huang, Y. Research needs and recommendations on environmental implications of additive manufacturing. Addit. Manuf. 2018, 19, 21–28. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
33. Short, D.B.; Sirinterlikci, A.; Badger, P.; Artieri, B. Environmental, health, and safety issues in rapid prototyping. Rapid Prototyp. J. 2015, 21, 105–110. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
34. Simon, T.R.; Aguilera, G.A.; Zhao, F. Characterization of particle emission from fuse deposition modeling printers. In Proceedings of the International Manufacturing Science and Engineering Conference, Los Angeles, CA, USA, 4–8 June 2017; American Society of Mechanical Engineers: Los Angeles, CA, USA, 2017; Volume 50732, p. V002T01A040.
    Paper not yet in RePEc: Add citation now
    
35. Stephens, B.; Azimi, P.; El Orch, Z.; Ramos, T. Ultrafine particle emissions from desktop 3D printers. Atmos. Environ. 2013, 79, 334–339. [CrossRef] Sustainability 2022, 14, 2900 23 of 23
    Paper not yet in RePEc: Add citation now
    
36. Tuomi, T.; Vainiotalo, S. The guideline and target values for total volatile organic compound concentrations in industrial indoor environments in Finland. Indoor Built Environ. 2014, 25, 424–434. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
37. Wojtyła, S.; Klama, P.; Baran, T. Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon. J. Occup. Environ. Hyg. 2017, 14, D80–D85. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
38. Yi, J.; LeBouf, R.F.; Duling, M.G.; Nurkiewicz, T.; Chen, B.T.; Schwegler-Berry, D.; Virji, M.A.; Stefaniak, A.B. Emission of particulate matter from a desktop three-dimensional (3D) printer. J. Toxicol. Environ. Health A 2016, 79, 453–465. [CrossRef]
    Paper not yet in RePEc: Add citation now
    

1. AutoML-driven diagnostics of the feeder motor in fused filament fabrication machines from direct current signals. (2025). Pochiraju, Kishore ; Pitz, Emil ; Rooney, Sean.
   In: Journal of Intelligent Manufacturing.
   RePEc:spr:joinma:v:36:y:2025:i:3:d:10.1007_s10845-024-02332-3.

   Full description at Econpapers || Download paper

2. Additive manufacturing scenario for automotive spare parts supply: A case study approach. (2025). Schneider, Nick ; Lasch, Rainer ; Bade, Alexander.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:282:y:2025:i:c:s0925527325000374.

   Full description at Econpapers || Download paper

3. A new branch-and-cut approach for integrated planning in additive manufacturing. (2025). Kuttner, Leopold ; Tamke, Felix ; Zipfel, Benedikt.
   In: European Journal of Operational Research.
   RePEc:eee:ejores:v:322:y:2025:i:2:p:427-447.

   Full description at Econpapers || Download paper

4. A blueprint for success? Exploring business models of additive manufacturing ventures. (2024). Thies, Ferdinand ; Huber, Alexander ; Jarchow, Svenja ; Stojkovski, Isabella.
   In: Technological Forecasting and Social Change.
   RePEc:eee:tefoso:v:208:y:2024:i:c:s0040162524004736.

   Full description at Econpapers || Download paper

5. Optimal after-sales service offering strategy: Additive manufacturing, traditional manufacturing, or hybrid?. (2024). Zhang, Tianhua ; Sun, Mingyao ; Yang, Liu ; To, Chi.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:268:y:2024:i:c:s0925527323003481.

   Full description at Econpapers || Download paper

6. Additive manufacturing in international business: Bridging academic and practitioners perspectives. (2024). Kubalek, Jan ; Culasso, Francesca ; Giacosa, Elisa ; Crocco, Edoardo.
   In: Journal of International Management.
   RePEc:eee:intman:v:30:y:2024:i:3:s1075425324000322.

   Full description at Econpapers || Download paper

7. Combinatorial Benders decomposition for single machine scheduling in additive manufacturing with two-dimensional packing constraints. (2024). Mao, Zhaofang ; Chen, Lin ; Fang, Kan ; Fu, Enyuan ; Huang, Dian.
   In: European Journal of Operational Research.
   RePEc:eee:ejores:v:317:y:2024:i:3:p:890-905.

   Full description at Econpapers || Download paper

8. Optimizing performance for cooling electronic components using innovative heterogeneous materials. (2024). Salmon, F ; Lacanette, D ; Haillot, D ; Ghadim, Benisi H ; Veillere, A ; Godin, A ; Duquesne, M.
   In: Applied Energy.
   RePEc:eee:appene:v:362:y:2024:i:c:s0306261924003660.

   Full description at Econpapers || Download paper

9. .

   Full description at Econpapers || Download paper

10. Success Criteria for Applying Construction Technologies in Residential Projects. (2023). Altuwaim, Ayman ; Almohsen, Abdulmohsen ; Altasan, Abdulelah.
    In: Sustainability.
    RePEc:gam:jsusta:v:15:y:2023:i:8:p:6854-:d:1126975.

    Full description at Econpapers || Download paper

11. 3D Printing for Repair: An Approach for Enhancing Repair. (2023). Balkenende, Ruud ; Arriola, Julieta Bolaos ; Faludi, Jeremy ; Flipsen, Bas ; van Oudheusden, Alma.
    In: Sustainability.
    RePEc:gam:jsusta:v:15:y:2023:i:6:p:5168-:d:1097322.

    Full description at Econpapers || Download paper

12. Advanced Manufacturing Design of an Emergency Mechanical Ventilator via 3D Printing—Effective Crisis Response. (2023). Kaminaris, Stavros D ; Papageorgas, Panagiotis ; Kiskira, Kyriaki ; Kalkanis, Konstantinos ; Banis, George ; Piromalis, Dimitrios ; Mpelesis, Dimitrios ; Batagiannis, Athanasios.
    In: Sustainability.
    RePEc:gam:jsusta:v:15:y:2023:i:4:p:2857-:d:1057952.

    Full description at Econpapers || Download paper

13. A Performance Study on 3D-Printed Bioplastic Pots from Soybean By-Products. (2023). Yodo, Nita ; Rahman, Md Mahbubar ; Lee, Chiwon W ; Dey, Arup ; Gupta, Anunay.
    In: Sustainability.
    RePEc:gam:jsusta:v:15:y:2023:i:13:p:10535-:d:1186684.

    Full description at Econpapers || Download paper

14. Different strokes for different folks: Comparative analysis of 3D printing in large, medium and small firms. (2023). Talwar, Shalini ; Badghish, Saeed ; Alghafes, Rasha ; Islam, Nazrul ; Dhir, Amandeep.
    In: Technovation.
    RePEc:eee:techno:v:125:y:2023:i:c:s0166497223001037.

    Full description at Econpapers || Download paper

15. Modeling and optimization for static-dynamic routing of a vehicle with additive manufacturing equipment. (2023). Yang, Yiran ; Cui, Weiwei ; Di, Lei.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:257:y:2023:i:c:s0925527322003383.

    Full description at Econpapers || Download paper

16. Adoption of triply periodic minimal surface structure for effective metal hydride-based hydrogen storage. (2023). Aziz, Muhammad ; Lesmana, Luthfan Adhy.
    In: Energy.
    RePEc:eee:energy:v:262:y:2023:i:pa:s0360544222022812.

    Full description at Econpapers || Download paper

17. Investigating the interaction of factors for implementing additive manufacturing to build an antifragile supply chain: TISM-MICMAC approach. (2022). Bag, Surajit ; Mishra, Ruchi ; Kr, Rajesh ; Priyadarshini, Jaya.
    In: Operations Management Research.
    RePEc:spr:opmare:v:15:y:2022:i:1:d:10.1007_s12063-022-00259-7.

    Full description at Econpapers || Download paper

18. “Do technologies really affect that much? exploring the potential of several industry 4.0 technologies in today’s lean manufacturing shop floors”. (2022). Llach, Josep ; Leon-Mateos, Fernando ; Sartal, Antonio.
    In: Operational Research.
    RePEc:spr:operea:v:22:y:2022:i:5:d:10.1007_s12351-022-00732-y.

    Full description at Econpapers || Download paper

19. Deep semi-supervised learning of dynamics for anomaly detection in laser powder bed fusion. (2022). Larsen, Sebastian ; Hooper, Paula.
    In: Journal of Intelligent Manufacturing.
    RePEc:spr:joinma:v:33:y:2022:i:2:d:10.1007_s10845-021-01842-8.

    Full description at Econpapers || Download paper

20. Additive Manufacturing and Green Information Systems as Technological Capabilities for Firm Performance. (2022). Gupta, Shivam ; Strazzullo, Serena ; Modgil, Sachin ; Cerchione, Roberto ; Centobelli, Piera.
    In: Global Journal of Flexible Systems Management.
    RePEc:spr:gjofsm:v:23:y:2022:i:4:d:10.1007_s40171-022-00315-y.

    Full description at Econpapers || Download paper

21. Assessing the Social Impacts of Additive Manufacturing Using Hierarchical Evidential Reasoning Approach. (2022). Jaradat, Raed ; Ibne, Niamat Ullah ; Bappy, Mahathir Mohammad ; Key, John.
    In: Global Journal of Flexible Systems Management.
    RePEc:spr:gjofsm:v:23:y:2022:i:2:d:10.1007_s40171-021-00295-5.

    Full description at Econpapers || Download paper

22. Measuring adoption of industry 4.0 technologies via international trade data: insights from European countries. (2022). Lamperti, Fabio ; Castellani, Davide ; Lavoratori, Katiuscia.
    In: Economia e Politica Industriale: Journal of Industrial and Business Economics.
    RePEc:spr:epolin:v:49:y:2022:i:1:d:10.1007_s40812-021-00204-y.

    Full description at Econpapers || Download paper

23. Facilitating Safe FFF 3D Printing: A Prototype Material Case Study. (2022). Saliakas, Stratos ; Damilos, Spyridon ; Karayannis, Panagiotis ; Gomez, Julio ; Kokkinopoulos, Ioannis ; Koumoulos, Elias P ; Gkartzou, Eleni ; Charitidis, Constantinos.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:5:p:3046-:d:764589.

    Full description at Econpapers || Download paper

24. Characterization of Emissions in Fab Labs: An Additive Manufacturing Environment Issue. (2022). Khaki, Shirin ; Marin, Philippe ; Rio, Maud.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:5:p:2900-:d:762486.

    Full description at Econpapers || Download paper

25. Life Cycle Assessment and Cost Analysis of Additive Manufacturing Repair Processes in the Mold Industry. (2022). Esteves, Silvia ; Pinto, Sara M ; Campos, Sara ; Oliveira, Luis ; Sobral, Joo ; Matos, Joo R ; Gouveia, Joana R.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:4:p:2105-:d:747916.

    Full description at Econpapers || Download paper

26. The 3D Printing Potential for Heat Flow Optimization: Influence of Block Geometries on Heat Transfer Processes. (2022). de Rubeis, Tullio ; Giusti, Letizia ; Ambrosini, Dario ; Ciccozzi, Annamaria.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:23:p:15830-:d:986574.

    Full description at Econpapers || Download paper

27. Assessing Adoption Factors for Additive Manufacturing: Insights from Case Studies. (2022). Boehme, Tillmann ; Handfield, Robert B ; Turner, Neil ; Aitken, James ; Bozarth, Cecil.
    In: Logistics.
    RePEc:gam:jlogis:v:6:y:2022:i:2:p:36-:d:835802.

    Full description at Econpapers || Download paper

28. Companies’ adoption of Smart Technologies to achieve structural ambidexterity: an analysis with SEM. (2022). Lessanibahri, Sina ; Gastaldi, Luca ; Miragliotta, Giovanni ; Tedaldi, Gianluca.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:174:y:2022:i:c:s004016252100620x.

    Full description at Econpapers || Download paper

29. Is there a home field advantage? The impact of shareholder wealth from U.S. manufacturing location decisions: A comparative analysis. (2022). Godfrey, Michael ; Woldt, Jason.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:248:y:2022:i:c:s0925527322000950.

    Full description at Econpapers || Download paper

30. To be more innovative and more competitive in dynamic environments: The role of additive manufacturing. (2022). Ince, Huseyin ; Imamoglu, Salih Zeki ; Turkcan, Hulya.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:246:y:2022:i:c:s0925527322000111.

    Full description at Econpapers || Download paper

31. Evolution of industry 4.0 and international business: A systematic literature review and a research agenda. (2022). Bchi, Giacomo ; Castagnoli, Rebecca ; Cugno, Monica ; Coeurderoy, Rgis.
    In: European Management Journal.
    RePEc:eee:eurman:v:40:y:2022:i:4:p:572-589.

    Full description at Econpapers || Download paper

32. Topology optimization of heat exchangers: A review. (2022). Hua, Yuchao ; Fan, Yilin ; le Corre, Steven ; Luo, Lingai ; Fawaz, Ahmad.
    In: Energy.
    RePEc:eee:energy:v:252:y:2022:i:c:s0360544222009562.

    Full description at Econpapers || Download paper

33. Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach. (2021). Arian, Nazanin Hosseini ; Rahimnia, Fariborz ; Sibevei, Ali ; Pooya, Alireza.
    In: Operations Management Research.
    RePEc:spr:opmare:v:14:y:2021:i:3:d:10.1007_s12063-021-00228-6.

    Full description at Econpapers || Download paper

34. Systematic review of sourcing and 3D printing: make-or-buy decisions in industrial buyer–supplier relationships. (2021). Essig, Michael ; Meyer, Matthias M ; Glas, Andreas H.
    In: Management Review Quarterly.
    RePEc:spr:manrev:v:71:y:2021:i:4:d:10.1007_s11301-020-00198-2.

    Full description at Econpapers || Download paper

35. Sustainable Manufacturing Technologies: A Systematic Review of Latest Trends and Themes. (2021). Bastas, Ali.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:8:p:4271-:d:534479.

    Full description at Econpapers || Download paper

36. Amazons New Supra-Omnichannel: Realizing Growing Seamless Switching for Apparel During COVID-19. (2021). Tou, Yuji ; Akhtar, Waleed ; Neittaanmaki, Pekka ; Watanabe, Chihiro.
    In: Technology in Society.
    RePEc:eee:teinso:v:66:y:2021:i:c:s0160791x21001202.

    Full description at Econpapers || Download paper

37. Benefiting from additive manufacturing for mass customization across the product life cycle. (2021). Seifert, Ralf W ; Lacroix, Rachel ; Timonina-Farkas, Anna.
    In: Operations Research Perspectives.
    RePEc:eee:oprepe:v:8:y:2021:i:c:s2214716021000208.

    Full description at Econpapers || Download paper

38. Digitalisation of Production: Industrial Additive Manufacturing and its Implications for Competition and Social Welfare. (2021). Schwierzy, Julian.
    In: Munich Papers in Political Economy.
    RePEc:aiw:wpaper:16.

    Full description at Econpapers || Download paper

39. A decision model on the repair and maintenance of shipping containers. (2020). Voss, Stefan ; Stahlbock, Robert ; Hoffmann, Niclas.
    In: Journal of Shipping and Trade.
    RePEc:spr:josatr:v:5:y:2020:i:1:d:10.1186_s41072-020-00070-2.

    Full description at Econpapers || Download paper

40. Challenges and critical successful factors for apparel mass customization operations: recent development and case study. (2020). Chow, Pui-Sze ; Liu, NA ; Zhao, Hongshan.
    In: Annals of Operations Research.
    RePEc:spr:annopr:v:291:y:2020:i:1:d:10.1007_s10479-019-03149-7.

    Full description at Econpapers || Download paper

41. Mapping the Scientific Research on Mass Customization Domain: A Critical Review and Bibliometric Analysis. (2020). Korsakien, Renata ; Baranauskas, Gedas ; Raiien, Agota Giedr.
    In: JRFM.
    RePEc:gam:jjrfmx:v:13:y:2020:i:9:p:220-:d:416790.

    Full description at Econpapers || Download paper

42. Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers. (2020). Breitenecker, Robert J ; Holzmann, Patrick ; Gregori, Patrick ; Schwarz, Erich J.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:159:y:2020:i:c:s0040162520310192.

    Full description at Econpapers || Download paper

43. Make disruptive technological change happen - The case of additive manufacturing. (2020). Gartner, Johannes ; Maresch, Daniela.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:155:y:2020:i:c:s0040162517308302.

    Full description at Econpapers || Download paper

44. Smart factory performance and Industry 4.0. (2020). Castagnoli, Rebecca ; Cugno, Monica ; Buchi, Giacomo.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:150:y:2020:i:c:s004016251931217x.

    Full description at Econpapers || Download paper

45. Additive Manufacturing: Exploring the Social Changes and Impacts. (2019). Godina, Radu ; Peas, Paulo ; Ribeiro, Ines ; Carvalho, Helena ; Matos, Florinda ; Jacinto, Celeste.
    In: Sustainability.
    RePEc:gam:jsusta:v:11:y:2019:i:14:p:3757-:d:247016.

    Full description at Econpapers || Download paper

46. A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society. (2019). Caviggioli, Federico ; Ughetto, Elisa.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:208:y:2019:i:c:p:254-268.

    Full description at Econpapers || Download paper

47. Investigation of Energy Requirements and Environmental Performance for Additive Manufacturing Processes. (2018). Liu, Zhichao ; Cong, Weilong ; Jiang, Qiuhong ; Kim, Hoyeol ; Zhang, Hong-Chao ; Ning, Fuda ; Xu, Changxue.
    In: Sustainability.
    RePEc:gam:jsusta:v:10:y:2018:i:10:p:3606-:d:174581.

    Full description at Econpapers || Download paper

Report date: 2025-10-05 06:22:44 || Missing content? Let us know