- Abdulla, F., Qdais, H. A., & Rabi, A. (2008). Site investigation on medical waste management practices in northern Jordan. Waste Management, 28(2), 450–458.
Paper not yet in RePEc: Add citation now
- Aboutahoun, A. W. (2012). Combined distance-reliability model for hazardous waste transportation and disposal. Life Science Journal, 9(2), 1286–1295.
Paper not yet in RePEc: Add citation now
Achillas, C., Aidonis, D., Vlachokostas, C., Moussiopoulos, N., Banias, G., & Triantafillou, D. (2012). A multi-objective decision-making model to select waste electrical and electronic equipment transportation media. Resources, Conservation and Recycling, 66, 76–84.
- Achillas, C., Vlachokostas, C., Aidonis, D., Moussiopoulos, N., Iakovou, E., & Banias, G. (2010a). Optimizing reverse logistics network to support policy-making in the case of electrical and electronic equipment. Waste Management, 30(12), 2592–2600.
Paper not yet in RePEc: Add citation now
- Achillas, C., Vlachokostas, C., Moussiopoulos, Ν, & Banias, G. (2010b). Decision support system for the optimal location of electrical and electronic waste treatment plants: A case study in Greece. Waste Management, 30(5), 870–879.
Paper not yet in RePEc: Add citation now
- Ahluwalia, P. K., & Nema, A. K. (2006). Multi-objective reverse logistics model for integrated computer waste management. Waste Management & Research, 24(6), 514–527.
Paper not yet in RePEc: Add citation now
- Ahluwalia, P. K., & Nema, A. K. (2007). A life cycle based multi-objective optimization model for the management of computer waste. Resources Conservation & Recycling, 51(4), 792–826.
Paper not yet in RePEc: Add citation now
- Ahluwalia, P. K., & Nema, A. K. (2011). Capacity planning for electronic waste management facilities under uncertainty: Multi-objective multi-time-step model development. Waste Management & Research. The Journal of the International Solid Wastes & Public Cleansing Association ISWA., 29(7), 694–709.
Paper not yet in RePEc: Add citation now
- Ajdari, S., Babadoost, A., Zamani, B., & Shahriari, M. (2009). Risk evaluation of household hazardous waste: A case study. In Proceedings of international symposium on occupational safety and hygiene SHO 20 (pp. 23–27).
Paper not yet in RePEc: Add citation now
- Akgül, M. (1994). An optimization approach for locating a hazardous waste disposal facility in Istanbul province. Waste Management & Research, 12(6), 495–506.
Paper not yet in RePEc: Add citation now
- Akpieyi, A., Tudor, T. L., & Dutra, C. (2015). The utilization of risk-based frameworks for managing healthcare waste: A case study of the National Health Service in London. Safety of Science, 72, 127–132.
Paper not yet in RePEc: Add citation now
- Alagöz, A. Z., & Kocasoy, G. (2008a). Determination of the best appropriate management methods for the health-care wastes in Istanbul. Waste Management, 28(7), 1227–1235.
Paper not yet in RePEc: Add citation now
- Alagöz, A. Z., & Kocasoy, G. (2008b). Improvement and modification of the routing system for the health-care waste collection and transportation in Istanbul. Waste Management, 28(8), 1461–1471.
Paper not yet in RePEc: Add citation now
- Ali, M., Wang, W., Chaudhry, N., & Geng, Y. (2017a). Hospital waste management in developing countries: A mini-review. Waste Management & Research, 35(6), 581–592.
Paper not yet in RePEc: Add citation now
- Ali, M., Wang, W., Chaudhry, N., Geng, Y., & Ashraf, U. (2017b). Assessing knowledge, performance, and efficiency for hospital waste management: A comparison of government and private hospitals in Pakistan. Environmental Monitoring & Assessment, 189(4), 181.
Paper not yet in RePEc: Add citation now
- Alidi, A. S. (1992). An integer goal programming model for hazardous waste treatment and disposal. Applied Mathematical Modelling, 16(12), 645–651.
Paper not yet in RePEc: Add citation now
- Alidi, A. S. (1996). A multiobjective optimization model for the waste management of the petrochemical industry. Applied Mathematical Modelling, 20(12), 925–933.
Paper not yet in RePEc: Add citation now
- Alshraideh, H., & Qdais, H. A. (2017). Stochastic modeling and optimization of medical waste collection in Northern Jordan. Journal of Material Cycles and Waste Management, 19(2), 743–753.
Paper not yet in RePEc: Add citation now
- Alumur, S., & Kara, B. Y. (2007). A new model for the hazardous waste location-routing problem. Computers & Operations Research, 34(5), 1406–1423.
Paper not yet in RePEc: Add citation now
- Andarani, P., & Budiawan, W. (2015). Multicriteria decision analysis for optimizing site selection of electronic and electricity equipment waste dismantling and sorting facility (Case study: In Indonesia, using AHP). In 2015 international conference on science in information technology (ICSITech) (pp. 264–269). IEEE.
Paper not yet in RePEc: Add citation now
- Anderton, D. L., Anderson, A. B., Rossi, P. H., Oakes, J. M., & Fraser, M. R. (1994). Hazardous Waste Facilities: “Environmental Equity Issues in Metropolitan Areas. Evaluation Review., 18(2), 123–140.
Paper not yet in RePEc: Add citation now
Anthony, B., Majid, M. A., & Romli, A. (2020). Green IS diffusion in organizations: A model and empirical results from Malaysia. Environment, Development and Sustainability, 22(1), 383–424.
- Asari, M., & Sakai, S. I. (2011). Consumer perspectives on household hazardous waste management in Japan. Journal of Material Cycles & Waste Management, 13(1), 10–24.
Paper not yet in RePEc: Add citation now
Asefi, H., & Maghrebi, M. (2019). Mathematical modelling and heuristic approaches to the location-routing problem of a cost-effective integrated solid waste management. Annals of Operations Research, 237(1–2), 75–110.
Asgari, N., Rajabi, M., Jamshidi, M., Khatami, M., & Farahani, R. Z. (2017). A memetic algorithm for a multi-objective obnoxious waste location-routing problem: A case study. Annals of Operations Research, 250(2), 1–30.
- ASSOCHAM. (2014). Electronic waste management in India an Associated Chambers of Commerce of India. Retrieved 4 May 2021, from http://www.indiaenvironmentportal.org.in/files/assocham%20press%20release.pdf .
Paper not yet in RePEc: Add citation now
Atlas, M. K. (2001). Safe and sorry: Risk, environmental equity, and hazardous waste management facilities. Risk Analysis, 21(5), 939–939.
- Awasthi, A. K., Wang, M., Awasthi, M. K., Wang, Z. S., & Li, J. H. (2018). Environmental pollution and human body burden from improper recycling of e-waste in China: A short-review. Environmental Pollution, 243, 1310–1316.
Paper not yet in RePEc: Add citation now
- Awasthi, A. K., Zeng, X. L., & Li, J. H. (2016a). Relationship between e-waste recycling and human health risk in India: A critical review. Environmental Science and Pollution Research, 23(12), 11509–11532.
Paper not yet in RePEc: Add citation now
- Awasthi, A. K., Zeng, X. L., & Li, J. H. (2016b). Comparative examining and analysis of e-waste recycling in typical developing and developed countries. In 5th international conference on solid waste management (IconSWM) (Vol. 35, pp. 676–680).
Paper not yet in RePEc: Add citation now
Ayvaz, B., Bolat, B., & Aydın, N. (2015). Stochastic reverse logistics network design for the waste of electrical and electronic equipment. Resources, Conservation, and Recycling, 104, 391–404.
- Bakhiyi, B., Gravel, S., Ceballos, D., Flynn, M. A., & Zayed, J. (2017). Has the question of e-waste opened a Pandora’s box? An overview of unpredictable issues and challenges. Environment International, 110(1), 173–192.
Paper not yet in RePEc: Add citation now
- Bdour, A., Altrabsheh, B., Hadadin, N., & Al-Shareif, M. (2007). Assessment of medical wastes management practice: A case study of the northern part of Jordan. Waste Management, 27(6), 746–759.
Paper not yet in RePEc: Add citation now
Berglund, P. G., & Kwon, C. (2014). Robust facility location problem for hazardous waste transportation. Networks and Spatial Economics, 14(1), 91–116.
- Bernstad, A., Jansen, J. L., & Aspegren, H. (2011). Property-close source separation of hazardous waste and waste electrical and electronic equipment: A Swedish case study. Waste Management, 31(3), 536–543.
Paper not yet in RePEc: Add citation now
- Birpınar, M. E., Bilgili, M. S., & Erdoğan, T. (2009). Medical waste management in Turkey: A case study of Istanbul. Waste Management, 29(1), 445–448.
Paper not yet in RePEc: Add citation now
Boyer, O., Hong, T. S., Pedram, A., Yusuff, R. B. M., & Zulkifli, N. (2013). A mathematical model for the industrial hazardous waste location-routing problem. Journal of Applied Mathematics, 2013: 435272.
- Brainard, J., Lovett, A., & Parfitt, J. (1996). Assessing hazardous waste transport risks using a GIS. International Journal of Geographical Information Systems, 10(7), 831–849.
Paper not yet in RePEc: Add citation now
- Brandão, J. (2018). Iterated local search algorithm with ejection chains for the open vehicle routing problem with time windows. Computers & Industrial Engineering, 120(Jun), 146–159.
Paper not yet in RePEc: Add citation now
- Budak, A., & Ustundag, A. (2013). A risk analysis of waste collection and disposal in health institutions of Turkey. In Intelligent systems and decision making for risk analysis and crisis response-proceedings of the 4th international conference on risk analysis and crisis response, RACRpp (pp. 657–663).
Paper not yet in RePEc: Add citation now
- Caniato, M., Tudor, T. L., & Vaccari, M. (2016). Assessment of health-care waste management in a humanitarian crisis: A case study of the Gaza Strip. Waste Management, 58, 386–396.
Paper not yet in RePEc: Add citation now
- Cao, J., Chen, Y., Shi, B., Lu, B., Zhang, X. M., Ye, X. H., Zhai, G. S., Zhu, C. B., & Zhou, G. G. (2016). WEEE recycling in Zhejiang Province, China: Generation, treatment, and public awareness. Journal of Cleaner Production, 127, 311–324.
Paper not yet in RePEc: Add citation now
- Cappanera, P., Gallo, G., & Maffioli, F. (2003). Discrete facility location and routing of obnoxious activities. Discrete Applied Mathematics, 133(1), 3–28.
Paper not yet in RePEc: Add citation now
- Capraz, O., Polat, O., & Gungor, A. (2015). Planning of waste electrical and electronic equipment (WEEE) recycling facilities: MILP modeling and case study investigation. Flexible Services & Manufacturing Journal, 27(4), 1–30.
Paper not yet in RePEc: Add citation now
- Carter, C. R., & Easton, P. L. (2011). Sustainable supply chain management: Evolution and future directions. International Journal of Physical Distribution & Logistics Management, 41(1), 46–62.
Paper not yet in RePEc: Add citation now
- Ceccarini, A., Bianchi, F., Minichilli, F., Fazzo, L., Santoro, M., DellaSeta, M., Comba, P., & Martuzzi, M. (2017). Hazardous waste and health impact: A systematic review of the scientific literature. Environmental Health, 16(1), 1–11.
Paper not yet in RePEc: Add citation now
- Cesaro, A., Belgiorno, V., Vaccari, M., Jandric, A., & Chung, T. D. (2017). A device-specific prioritization strategy based on the potential for harm to human health in informal WEEE recycling. Environmental Science and Pollution Research, 25(1), 683–692.
Paper not yet in RePEc: Add citation now
- Chaerul, M., Tanaka, M., & Shekdar, A. V. (2008). Resolving complexities in healthcare waste management: A goal programming approach. Waste Management & Research, 26(3), 217–232.
Paper not yet in RePEc: Add citation now
- Chauhan, A., & Singh, A. (2016). A hybrid multi-criteria decision-making method approach for selecting a sustainable location of healthcare waste disposal facility. Journal of Cleaner Production, 139, 1001–1010.
Paper not yet in RePEc: Add citation now
- Chen, X. Y., & Xiong, H. B. (2012). The analysis of identification and prevention for the environmental risk from incineration for medical wastes. In Proceedings of the 4th international conference on environmental technology and knowledge transfer (pp. 397–402).
Paper not yet in RePEc: Add citation now
Chen, Y. W., Wang, C. H., & Lin, S. J. (2008). A multi-objective geographic information system for route selection of nuclear waste transport. Omega, 36(3), 363–372.
- Ciocoiu, C. N., Colesca, S. E., RudäƒReanu, C., & Popescu, M. L. (2016). Management of waste electrical and electronic equipment in Romania: A mini-review. Waste Management & Research, 34(2), 96–106.
Paper not yet in RePEc: Add citation now
- Cole, C., Gnanapragasam, A., Singh, J., & Cooper, T. (2018). Enhancing reuse and resource recovery of electrical and electronic equipment with reverse logistics to meet carbon reduction targets. In 25th CIRP life cycle engineering (LCE) conference.
Paper not yet in RePEc: Add citation now
Court, C. D., Munday, M., Roberts, A., & Turner, K. (2015). Can the hazardous waste supply chain ‘hotspots’ be identified using an input–output framework? European Journal of Operational Research, 241(1), 177–187.
- CSY. (2020). China statistical yearbook. China Statistical Publishing House.
Paper not yet in RePEc: Add citation now
- Da Silva, C. E., Hoppe, A. E., Ravanello, M. M., & Mello, N. (2005). Medical wastes management in the south of Brazil. Waste Management, 25(6), 600–605.
Paper not yet in RePEc: Add citation now
Dantzig, G. B., & Ramser, J. H. (1959). The truck dispatching problem. Management of Science, 6(1), 80–91.
- Das, A., Gupta, A. K., & Mazumder, T. N. (2012a). A comprehensive risk assessment framework for offsite transportation of inflammable hazardous waste. Journal of Hazardous Material, 227–228, 88–96.
Paper not yet in RePEc: Add citation now
- Das, A., Gupta, A. K., & Mazumder, T. N. (2012b). Vulnerability assessment using hazard potency for regions generating industrial hazardous waste. Journal of Hazardous Materials, 229, 308–317.
Paper not yet in RePEc: Add citation now
- Das, A., Mazumder, T. N., & Gupta, A. K. (2012c). Pareto frontier analyses based decision-making tools for transportation of hazardous waste. Journal of Hazardous Materials, 227, 341–352.
Paper not yet in RePEc: Add citation now
- Das, A., Mazumder, T. N., & Gupta, A. K. (2016). A methodology to design a composite accident index and assess the links in a network carrying hazardous waste: A case study of Kolkata Metropolitan area. In 11th international conference on transportation planning and implementation methodologies for developing countries (TPMDC) (Vol. 17, pp. 273–281).
Paper not yet in RePEc: Add citation now
- De Feo, G., & De Gisi, S. (2014). Using MCDA and GIS for hazardous waste landfill siting considering land scarcity for waste disposal. Waste Management, 34(11), 2225–2238.
Paper not yet in RePEc: Add citation now
De Souza, R. G., Clímaco, J. C. N., Sant’Anna, A. P., Rocha, T. B., do Valle, R. A., & Quelhas, O. L. (2016). Sustainability assessment and prioritization of e-waste management options in Brazil. Waste Management, 57, 46–56.
- Dhib, S., Addouche, S. A., Mhamdi, A. E, & Loukil, T. (2015). Performance study for a sustainable strategy: Case of electrical and electronic equipment’s waste. In IFIP international conference on product lifecycle management (Vol. 467, pp. 572–587). Springer International Publishing.
Paper not yet in RePEc: Add citation now
- Diaz, L. F., Savage, G. M., & Eggerth, L. L. (2005). Alternatives for the treatment and disposal of healthcare wastes in developing countries. Waste Management, 25(6), 626–637.
Paper not yet in RePEc: Add citation now
Dinler, E., & Güngör, Z. (2017). Planning decisions for recycling products containing hazardous and explosive substances: A fuzzy multi-objective model. Resources, Conservation and Recycling. https://doi.org/10.1016/j.resconrec.2016.11.012 .
Dixit, S., & Badgaiyan, A. J. (2016). Towards an improved understanding of reverse logistics: Examining the mediating role of return intention. Resources Conservation & Recycling, 107, 115–128.
- Doan, L. T. T., Amer, Y., Lee, S. H., Phuc, P. N. K., & Dat, L. Q. (2019). E-waste reverse supply chain: A review and future perspectives. Applied Sciences-Basel, 9(23), 5195.
Paper not yet in RePEc: Add citation now
- Dotoli, M., & Epicoco, N. (2017). A vehicle routing technique for hazardous waste collection. In 20th world congress of the international-federation-of-automatic-control (IFAC) (Vol. 50 (1), pp. 9694–9699).
Paper not yet in RePEc: Add citation now
- Efendigil, T., Ozkir, V., Demirel, N.C., Demirel, T., & Ondemir, O. (2012). A framework proposal upon the estimation of electronic: Waste products in Istanbul. In Uncertainty modeling in knowledge engineering and decision making (pp. 1184–1189).
Paper not yet in RePEc: Add citation now
- Eksioglu, B., Vural, A. V., & Reisman, A. (2009). The vehicle routing problem: A taxonomic review. Computers & Industrial Engineering, 57(4), 1472–1483.
Paper not yet in RePEc: Add citation now
- Elbadrawy, R., Moneim, A. F. A., & Fors, M. N. (2015). E-waste reverses logistics optimization in Egypt. In International conference on industrial engineering and operations management (pp. 1–6). IEEE.
Paper not yet in RePEc: Add citation now
- Elston, H. J. (2010). When household hazardous waste is too hazardous: A case study. Journal of Chemical Health & Safety, 17(4), 12–15.
Paper not yet in RePEc: Add citation now
- Emek, E., & Kara, B. Y. (2007). Hazardous waste management problem: The case for incineration. Computers & Operations Research, 34(5), 1424–1441.
Paper not yet in RePEc: Add citation now
- Erkut, E., & Neuman, S. (1992). A multi-objective model for locating undesirable facilities. Annals of Operations Research, 40(1), 209–227.
Paper not yet in RePEc: Add citation now
- Fernández, J., Fernández, P., & Pelegrın, B. (2000). A continuous location model for siting a non-noxious undesirable facility within a geographical region. European Journal of Operational Research, 121(2), 259–274.
Paper not yet in RePEc: Add citation now
- Fernando, A. S., & Jorge, M. (2015). Cost assessment and benefits of using RFID in reverse logistics of waste electrical & electronic equipment (WEEE). Procedia Computer Science, 55, 688–697.
Paper not yet in RePEc: Add citation now
- Ferreira, V., & Teixeira, M. R. (2010). Healthcare waste management practices and risk perceptions: Findings from hospitals in the Algarve region, Portugal. Waste Management, 30(12), 2657–2663.
Paper not yet in RePEc: Add citation now
Gamberini, R., Gebennini, E., & Grassi, A. (2008). An innovative model for WEEE recovery network management in accordance with the EU directives. International Journal of Environmental Technology and Management, 8(4), 348–368.
- Gamberini, R., Gebennini, E., & Rimini, B. (2009). An innovative container for weee collection and transport: Details and effects following the adoption. Waste Management, 29(11), 2846–2858.
Paper not yet in RePEc: Add citation now
Gamberini, R., Gebennini, E., Manzini, R., & Ziveri, A. (2010). On the integration of planning and environmental impact assessment for a WEEE transportation network: A case study. Resources, Conservation and Recycling, 54(11), 937–951.
- Garrick, B. J., Stetkar, J. W., & Bembia, P. J. (2010). Quantitative risk assessment of the New York state-operated west valley radioactive waste disposal area. Risk Analysis, 30(8), 1219–1230.
Paper not yet in RePEc: Add citation now
- Gehin, A., Zwolinski, P., & Brissaud, D. (2008). A tool to implement sustainable end-of-life strategies in the product development phase. Journal of Cleaner Production, 16(5), 566–576.
Paper not yet in RePEc: Add citation now
Ghasemzadeh, Z., Sadeghieh, A., & Shishebori, D. (2021). A stochastic multi-objective closed-loop global supply chain concerning waste management: a case study of the tire industry. Environment, Development and Sustainability, 23, 5794–5821.
- Ghezavati, V., & Morakabatchian, S. (2015). Application of a fuzzy service level constraint for solving a multi-objective location-routing problem for the industrial hazardous wastes. Journal of Intelligent & Fuzzy Systems, 28(5), 2003–2013.
Paper not yet in RePEc: Add citation now
Giannikos, I. (1998). A multi-objective programming model for locating treatment sites and routing hazardous wastes. European Journal of Operational Research, 104(2), 333–342.
- Greer, L. E. (1984). Definition of hazardous waste. Hazardous Waste, 1(3), 309–322.
Paper not yet in RePEc: Add citation now
- Gu, B. X., Zhu, W. M., Wang, H. K., Zhang, R. R., Liu, M. M., Chen, Y. Q., Wu, Y., Yang, X. Y., He, S., Cheng, R., Yang, J., & Bi, J. (2014). Household hazardous waste quantification, characterization, and management in China’s cities: A case study of Suzhou. Waste Management, 34(11), 2414–2423.
Paper not yet in RePEc: Add citation now
- Guimarães, A. G., Vaz-Fernandes, P., Ramos, M. R., & Martinho, A. P. (2018). Co-processing of hazardous waste: The perception of workers regarding sustainability and health issues in a Brazilian cement company. Journal of Cleaner Production, 186, 313–324.
Paper not yet in RePEc: Add citation now
- Gumus, A. T. (2009). Evaluation of hazardous waste transportation firms by using a two-step fuzzy-AHP and TOPSIS methodology. Expert Systems with Applications, 36(2), 4067–4074.
Paper not yet in RePEc: Add citation now
Gupta Govindan, K., Soleimani, H., & Kannan, D. (2015). Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future. European Journal of Operational Research, 240(3), 603–626.
- Gupta, S., & Palsule-Desai, O. D. (2011). Sustainable supply chain management: Review and research opportunities. IIMB Management Review, 23(4), 234–245.
Paper not yet in RePEc: Add citation now
- Habib, M. S., Lee, Y. H., & Memon, M. S. (2016). Mathematical models in humanitarian supply chain management: A systematic literature review. Mathematic Problem in Engineering, 2016, 1–20. https://doi.org/10.1155/2016/3212095 .
Paper not yet in RePEc: Add citation now
- Hachicha, W., Mellouli, M., Khemakhem, M., & Chabchoub, H. (2014). Routing system for infectious healthcare-waste transportation in Tunisia: A case study. Environmental Engineering & Management Journal, 13(1), 21–29.
Paper not yet in RePEc: Add citation now
- Hajar, Z., Btissam, D., & Mohamed, R. (2018). Onsite medical waste multi-objective vehicle routing problem with time windows. In 4th international conference on logistics operations management (GOL) (pp. 1–5). IEEE.
Paper not yet in RePEc: Add citation now
- Hejrani, S., & Ko, H. S. (2013). A reverse logistics model for medical waste management. In IIE annual conference. Proceedings. Institute of Industrial and Systems Engineers (pp. 97).
Paper not yet in RePEc: Add citation now
- Herat, S., & Agamuthu, P. (2012). E-waste: A problem or an opportunity? Review of issues, challenges, and solutions in Asian countries. Waste Management & Research, 30(11), 1113–1129.
Paper not yet in RePEc: Add citation now
- Hernandez, E. A., & Uddameri, V. (2008). Hazardous waste assessment, management, and minimization. Water Environment Research, 80(10), 1648–1653.
Paper not yet in RePEc: Add citation now
- Hischier, R., Wäger, P., & Gauglhofer, J. (2005). Does WEEE recycling make sense from an environmental perspective? The environmental impacts of the Swiss take-back and recycling systems for waste electrical and electronic equipment (WEEE). Environmental Impact Assessment Review, 25(5), 525–539.
Paper not yet in RePEc: Add citation now
- Hollister, K. A. K. (2002). A risk/cost framework for logistics policy evaluation: Hazardous waste management. The Journal of Business and Economic Studies, 8(1), 51–64.
Paper not yet in RePEc: Add citation now
- Homayouni, Z., & Pishvaee, M. S. (2020). A bi-objective robust optimization model for hazardous hospital waste collection and disposal network design problem. Journal of Maternal Cycles and Waste Management, 22, 1965–1984.
Paper not yet in RePEc: Add citation now
- IARC (International Agency for Research on Cancer). (2006). IARC monographs on the evaluation of carcinogenic risks to humans: Preamble. Retrieved August 29, 2014, from http://monographs.iarc.fr/ENG/Preamble/index.php .
Paper not yet in RePEc: Add citation now
- Ikhlayel, M. (2017). An integrated approach to establish e-waste management systems for developing countries. Journal of Cleaner Production, 170, 119–130.
Paper not yet in RePEc: Add citation now
- Ilankoon, I., Ghorbani, Y., Chong, M. N., Herath, G., Moyo, T., & Petersen, J. (2018). E-waste in the international context: A review of trade flows, regulations, hazards, waste management strategies and technologies for value recovery. Waste Management, 82, 258–275.
Paper not yet in RePEc: Add citation now
- Inglezakis, V. J., & Moustakas, K. (2015). Household hazardous waste management: A review. Journal of Environmental Management, 150, 310–321.
Paper not yet in RePEc: Add citation now
- Islam, A., Ahmed, T., Awual, M. R., Rahman, A., Sultana, M., Abd, Aziz A., et al. (2020). Advances in sustainable approaches to recover metals from e-waste: A review. Journal of Cleaner Production, 244, 118815.
Paper not yet in RePEc: Add citation now
- Islam, M. T., & Huda, N. (2018). Reverse logistics and closed-loop supply chain of waste electrical and electronic equipment (WEEE)/E-waste: A comprehensive literature review. Resources, Conservation and Recycling, 137, 48–75.
Paper not yet in RePEc: Add citation now
- Jacobs, T. L., & Warmerdam, J. M. (1994). Simultaneous routing and siting for hazardous-waste operations. Journal of Urban Planning and Development, 120(3), 115–131.
Paper not yet in RePEc: Add citation now
- Jiange, T. (2008). Research of E-waste reverse logistics information system based on web-GIS. In International conference on risk and reliability management (pp. 850–853).
Paper not yet in RePEc: Add citation now
- John, S. T., Sridharan, R., & Kumar, P. N. R. (2018). Reverse logistics network design: A case of mobile phones and digital cameras. The International Journal of Advanced Manufacturing Technology, 94(1–4), 615–631.
Paper not yet in RePEc: Add citation now
- Kahhat, R., Kim, J., Xu, M., Allenby, B., Williams, E., & Zhang, P. (2008). Exploring e-waste management systems in the United States. Resources, Conservation and Recycling, 52(7), 955–964.
Paper not yet in RePEc: Add citation now
- Kanoun, I., Masmoudi, Y., Chabchoub, H., & Aouni, B. (2013). A balanced approach for hazardous waste allocation problem. In International conference on modeling, simulation and applied optimization (pp. 1–6). IEEE.
Paper not yet in RePEc: Add citation now
- Khan, B. A., & Cheng, L. S. (2019). Healthcare waste management in Asian developing countries: A mini review. Waste Management & Research, 37(9), 863–875.
Paper not yet in RePEc: Add citation now
- Khetriwal, D. S., Kraeuchi, P., & Widmer, R. (2009). Producer responsibility for e-waste management: Key issues for consideration—Learning from the Swiss experience. Journal of Environmental Management, 90(1), 153–165.
Paper not yet in RePEc: Add citation now
Kilic, H. S., Cebeci, U., & Ayhan, M. B. (2015). Reverse logistics system design for the waste of electrical and electronic equipment (WEEE) in Turkey. Resources, Conservation and Recycling, 95, 120–132.
- Kojima, M., Yoshida, A., & Sasaki, S. (2009). Difficulties in applying extended producer responsibility policies in developing countries: Case studies in e-waste recycling in China and Thailand. Journal of Material Cycles & Waste Management, 11(3), 263–269.
Paper not yet in RePEc: Add citation now
- Koo, J. K., Shin, H. S., & Yoo, H. C. (1991). Multi-objective siting planning for a regional hazardous waste treatment center. Waste Management & Research, 9(3), 205–218.
Paper not yet in RePEc: Add citation now
- Külahcı, F. (2011). A risk analysis model for radioactive wastes. Journal of Hazardous Materials, 191(1), 349–355.
Paper not yet in RePEc: Add citation now
- Lara, E. R., De la Rosa, J. R., Castillo, A. I. R., Cerino-Cordova, F. D., Chuken, U. J. L., Delgadillo, S. S. F., & Rivas-Garcia, P. (2017). A comprehensive hazardous waste management program in a Chemistry School at a Mexican university. Journal of Cleaner Production, 142, 1486–1491.
Paper not yet in RePEc: Add citation now
- Lehtinen, U., & Poikela, K. (2006). Challenges of WEEE on reverse logistics: a case study on a collection network in Finland. In Proceedings of logistics research network annual conference (pp. 1–8).
Paper not yet in RePEc: Add citation now
- Li, J., Zeng, X., Chen, M., Ogunseitan, O. A., & Stevels, A. (2015a). “Control-alt-delete”: Rebooting solutions for the E-waste problem. Environmental Science & Technology, 49(12), 7095–7108.
Paper not yet in RePEc: Add citation now
- Li, L., Wang, S., Lin, Y. T., Liu, W. T., & Chi, T. (2015b). A covering model application on Chinese industrial hazardous waste management based on an integer program method. Ecological Indicators, 51, 237–243.
Paper not yet in RePEc: Add citation now
- Li, Y., Li, J. H., Chen, S. S., & Diao, W. H. (2012). Establishing indices for groundwater contamination risk assessment in the vicinity of hazardous waste landfills in China. Environmental Pollution, 165, 77–90.
Paper not yet in RePEc: Add citation now
- Liao, C. J., & Ho, C. C. (2014). Risk management for outsourcing biomedical waste disposal-using the failure mode and effects analysis. Waste Management, 34(7), 1324–1329.
Paper not yet in RePEc: Add citation now
- Lim-Wavde, K., Kauffman, R. J., & Dawson, G. S. (2016). Policy analytics, household informedness and the collection of household hazardous waste. In 3th international conference on industrial engineering and applications (ICIEA) (Vol. 68, pp. 1–5).
Paper not yet in RePEc: Add citation now
- Lim-Wavde, K., Kauffman, R. J., & Dawson, G. S. (2017). Household informedness and policy analytics for the collection and recycling of the household hazardous waste in California. Resources, Conservation and Recycling, 120, 88–107.
Paper not yet in RePEc: Add citation now
- List, G. F., Wood, B., Turnquist, M. A., Nozick, L. K., Jones, D. A., & Lawton, C. R. (2006). Logistics planning under uncertainty for disposition of radioactive wastes. Computers & Operations Research, 33(3), 701–723.
Paper not yet in RePEc: Add citation now
List, G., & Mirchandani, P. (1991). An integrated network/planar multiobjective model for routing and siting for hazardous materials and wastes. Transportation Science, 25(2), 146–156.
- Liu, H., & Yao, Z. (2017). The research on the recycling management model of medical waste based on RFID technology. Fresenius Environmental Bulletin, 26(12A), 469–477.
Paper not yet in RePEc: Add citation now
- Liu, H., & Yao, Z. (2018). Study of transfer station model for medical waste based on RFID and sensor technology. Fresenius Environmental Bulletin, 27(11), 7652–7660.
Paper not yet in RePEc: Add citation now
- Liu, K. H. (2011). Planning for hazardous campus waste collection. Journal of Hazardous Materials, 189(1), 363–370.
Paper not yet in RePEc: Add citation now
- Liu, Z. Y., Li, Z., Chen, W. M., Zhao, Y. P., Yue, H. X., & Wu, Z. Z. (2020). Path optimization of medical waste transport routes in the emergent public health event of COVID-19: A hybrid optimization algorithm based on the immune-ant colony algorithm. International Journal of Environmental Research and Public Health, 17, 5831.
Paper not yet in RePEc: Add citation now
- Longe, E. O. (2012). Healthcare waste management status in Lagos State, Nigeria: A case study from selected healthcare facilities in Ikorodu and Lagos metropolis. Waste Management & Research, 30(6), 562–571.
Paper not yet in RePEc: Add citation now
Lovett, A. A., Parfitt, J. P., & Brainard, J. S. (1997). Using GIS in risk analysis: A case study of hazardous waste transport. Risk Analysis, 17(5), 625–633.
- Lu, H. D., Fan, B. C., Yuan, L. H., & Li, Y. N. (2012). RFID-based hazardous waste management platform establishment. Procedia Engineering, 29, 4–8.
Paper not yet in RePEc: Add citation now
Macgregor, D., Slovic, P., Mason, R. G., Detweiler, J., Binney, S. E., & Dodd, B. (1994). Perceived risks of radioactive waste transport through Oregon: Results of a statewide survey. Risk Analysis, 14(1), 5–14.
- Maheswari, H., Yudoko, G., & Adhiutama, A. (2018). Customer value chain analysis for sustainable reverse logistics implementation: indonesian mobile phone industry. In 2018 IEEE international conference on industrial engineering and engineering management (IEEM) (pp. 89–92). IEEE.
Paper not yet in RePEc: Add citation now
- Makajic-Nikolic, D., Petrovic, N., Belic, A., Rokvic, M., Radakovic, J. A., & Tubic, V. (2016). The fault tree analysis of infectious medical waste management. Journal of Cleaner Production, 113, 365–373.
Paper not yet in RePEc: Add citation now
- Malik, S., Kumari, A., & Agrawal, S. (2015). Selection of locations of collection centers for reverse logistics using GTMA. In 4th international conference on materials processing and characterization (ICMPC) (pp. 2538–2547).
Paper not yet in RePEc: Add citation now
- Mantzaras, G., & Voudrias, E. A. (2017). An optimization model for the collection, haul, transfer, treatment and disposal of infectious medical waste: Application to a Greek region. Waste Management, 69, 518–534.
Paper not yet in RePEc: Add citation now
- Marinković, N., Vitale, K., Holcer, N. J., Dzakula, A., & Pavic, T. (2008). Management of hazardous medical waste in Croatia. Waste Management, 28(6), 1049–1056.
Paper not yet in RePEc: Add citation now
- Mayring P., Brunner E. (2007) Qualitative Inhaltsanalyse. In: Buber R., Holzmüller H.H. (eds) Qualitative Marktforschung. Gabler. https://doi.org/10.1007/978-3-8349-9258-1_42 .
Paper not yet in RePEc: Add citation now
- Medaglia, A. L., Villegas, J. G., & Rodríguez-Coca, D. M. (2009). Hybrid biobjective evolutionary algorithms for the design of a hospital waste management network. Journal of Heuristics, 15(2), 153–176.
Paper not yet in RePEc: Add citation now
- Mentzelou, P., Vosniakos, F., Dardavesis, T., Papadakis, N., Nikolaou, K., & Athansiadou, C. (2009). An information system for hospital waste management. Journal of Environmental Protection & Ecology, 10(1), 285–294.
Paper not yet in RePEc: Add citation now
- Messmann, L., Zender, V., Thorenz, A., & Tuma, A. (2020). How to quantify social impacts in strategic supply chain optimization: State of the art. Journal of Cleaner Production. https://doi.org/10.1016/J.JCLEPRO.2020.120459 .
Paper not yet in RePEc: Add citation now
- Michlowicz, E. (2012). Optimization of nonlinear transport-production task of medical waste. Archives of Transport, 24(3), 353–366.
Paper not yet in RePEc: Add citation now
- Min, H., & Kim, I. (2012). Green supply chain research: Past, present, and future. Logistics Research, 4(1–2), 39–47.
Paper not yet in RePEc: Add citation now
- Miyazaki, M., Imatoh, T., & Une, H. (2007). The treatment of infectious waste arising from home health and medical care services: Present situation in Japan. Waste Management, 27(1), 130–134.
Paper not yet in RePEc: Add citation now
- Mmereki, D., Baldwin, A., Li, B. Z., & Liu, M. (2017). Healthcare waste management in Botswana: Storage, collection, treatment, and disposal system. Journal of Material Cycles & Waste Management, 19(1), 351–365.
Paper not yet in RePEc: Add citation now
- Mmereki, D., Li, B., & Meng, L. (2014). Hazardous and toxic waste management in Botswana: Practices and challenges. Waste Management & Research, 32(12), 1158–1168.
Paper not yet in RePEc: Add citation now
- Moghaddas, N. H., & Namaghi, H. H. (2011). Hazardous waste landfill site selection in Khorasan Razavi Province, Northeastern Iran. Arabian Journal of Geosciences, 4(1–2), 103–113.
Paper not yet in RePEc: Add citation now
Mohanty, S., & Codell, R. B. (2004). Ramifications of risk measures in implementing quantitative performance assessment for the proposed radioactive waste repository at Yucca Mountain, Nevada, USA. Risk Analysis, 24(3), 537–546.
- Mou, P., Pan, X. Y., Xiang, D., & Duan, G. H. (2006). Regional E-waste reverse logistics system based on PCB recycling unit. In IEEE international symposium on electronics and the environment (pp. 346–350).
Paper not yet in RePEc: Add citation now
Nagy, G., & Salhi, S. (2007). Location-routing: Issues, models and methods. European Journal of Operational Research, 177(2), 649–672.
- Ndayizigamiye, P., Hangulu, L., & Akintola, O. (2017). A design of a mobile health intervention to enhance home-carers' disposal of medical waste in South Africa. In Global humanitarian technology conference (pp. 282–287).
Paper not yet in RePEc: Add citation now
- Nema, A. K., & Gupta, S. K. (2003). Multiobjective risk analysis and optimization of a regional hazardous waste management system. Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management, 7(2), 69–77.
Paper not yet in RePEc: Add citation now
- Nema, A. K., & GzaraGupta, S. K. (1999). Optimization of regional hazardous waste management systems: An improved formulation. Waste Management, 19(7), 441–451.
Paper not yet in RePEc: Add citation now
- Neto, J. Q. F., & Van Wassenhove, L. N. (2013). Original equipment manufacturers’ participation in take-back initiatives in Brazil: An analysis of engagement levels and obstacles. Journal of Industrial Ecology, 17(2), 238–248.
Paper not yet in RePEc: Add citation now
- Neveu, C. A., & Matus, C. P. (2007). Management of hazardous waste in a hospital. Revista Médica De Chile, 135(7), 885–895.
Paper not yet in RePEc: Add citation now
- Nixon, H., Ogunseitan, O. A., Saphores, J. D., Ogunseitan, O. A., & Shapiro, A. A. (2007). Electronic waste recycling preferences in California: The role of environmental attitudes and behaviors. In IEEE international symposium on electronics & the environment (pp. 251–256).
Paper not yet in RePEc: Add citation now
- Nolz, P. C., Absi, N., & Feillet, D. (2011). Optimization of infectious medical waste collection using RFID. In 2nd international conference on computational logistics (Vol. 6971, pp. 86–100).
Paper not yet in RePEc: Add citation now
- Nowakowski, P., Szwarc, K., & Boryczka, U. (2018). Vehicle route planning in e-waste mobile collection on-demand supported by artificial intelligence algorithms. Transportation Research Part d: Transport and Environment, 63, 1–22.
Paper not yet in RePEc: Add citation now
- Onan, K., Ulengin, F., & Sennaroglu, B. (2015). An evolutionary multi-objective optimization approach to disaster waste management: A case study of Istanbul, Turkey. Expert Systems with Applications, 42(22), 8850–8857.
Paper not yet in RePEc: Add citation now
- Otto, S., Kibbe, A., Henn, L., Hentschke, L., & Kaiser, F. G. (2018). The economy of E-waste collection at the individual level: A practice-oriented approach of categorizing determinants of E-waste collection into behavioral costs and motivation. Journal of Cleaner Production, 204, 33–40.
Paper not yet in RePEc: Add citation now
- Özkır, V. Ç., Efendigil, T., Demirel, T., Demirel, N. C., Deveci, M., & Topcu, B. (2015). A three-stage methodology for initiating an effective management system for electronic waste in Turkey. Resources Conservation & Recycling, 96, 61–70.
Paper not yet in RePEc: Add citation now
- Parkitny, W., Wojcik, W., & Generowicz, A. (2017). Logistic problem connected with removing asbestos as dangerous waste from terrains of country communes. IOP Conference Series: Earth and Environmental Science, 95(4), 1–11.
Paper not yet in RePEc: Add citation now
- Pasukphun, N. (2015). Low carbon solid waste collection and transportation route in university: A case study. Journal of Environmental Science and Technology, 8(4), 180–187.
Paper not yet in RePEc: Add citation now
- Pereir, A. L., Barros, R., & Pereira, S. R. (2017). Pharmacopollution and household waste medicine (hwm): How reverse logistics is environmentally important to brazil. Environmental Science and Pollution Research, 24, 24061–24075.
Paper not yet in RePEc: Add citation now
- Pérezbelis, V., Bovea, M., & Ibáñezforés, V. (2015). An in-depth literature review of the waste electrical and electronic equipment context: Trends and evolution. Waste Management Research, 33(1), 3–29.
Paper not yet in RePEc: Add citation now
- Phuc, P., Yu, V. F., & Chou, S. Y. (2013). Optimizing the fuzzy closed-loop supply chain for electrical and electronic equipments. International Journal of Fuzzy Systems, 15(1), 9–21.
Paper not yet in RePEc: Add citation now
- Plastria, F. (1996). Optimal location of undesirable facilities: An overview. Journal of Operations Research, Statistics and Computer Science, 36(2), 495–496.
Paper not yet in RePEc: Add citation now
- Polat, O., Capraz, O., & Gungor, A. (2018). Modeling of WEEE recycling operation planning under uncertainty. Journal of Cleaner Production, 180, 769–779.
Paper not yet in RePEc: Add citation now
- Pusch, R., Popov, V., & Adey, R. (2002). Risk assessment for hazardous waste disposal in abandoned mines. Risk Assessment for Hazardous Waste Disposal in Abandoned Mines, 5, 47–57.
Paper not yet in RePEc: Add citation now
- Qu, Y., Zhu, Q., Sarkis, J., Geng, Y., & Zhong, Y. G. (2013). A review of developing an e-waste collection system in Dalian, China. Journal of Cleaner Production, 52(4), 176–184.
Paper not yet in RePEc: Add citation now
Rabbani, M., Heidari, R., & Yazdanparast, R. (2019). A stochastic multi-period industrial hazardous waste location-routing problem: Integrating NSGA-II and Monte Carlo simulation. European Journal of Operational Research, 272(3), 945–961.
- Rabbani, M., Heidari, R., Farrokhi-Asl, H., & Rahimi, N. (2017). Using metaheuristic algorithms to solve a multi-objective industrial hazardous waste location-routing problem considering incompatible waste types. Journal of Cleaner Production, 170, 227–241.
Paper not yet in RePEc: Add citation now
- Rabbani, M., Nikoubin, A., & Farrokhi-Asl, H. (2020). Using modified metaheuristic algorithms to solve a hazardous waste collection problem considering workload balancing and service time windows. Soft Computing, 25, 1885–1912.
Paper not yet in RePEc: Add citation now
- Rahkonen, P., Mahnén, Y., & Ettala, M. (1992). Work safety in the collection and transport of hazardous wastes. Waste Management & Research, 10(3), 217–226.
Paper not yet in RePEc: Add citation now
- Rakas, J., Teodorović, D., & Kim, T. (2004). Multi-objective modeling for determining the location of undesirable facilities. Transportation Research Part D: Transport and Environment, 9(2), 125–138.
Paper not yet in RePEc: Add citation now
- Rerat, C., Papadokonstantakis, S., & Hungerbühler, K. (2013). Integrated waste management in the batch chemical industry based on multi-objective optimization. Journal of the Air & Waste Management Association, 63(3), 349–366.
Paper not yet in RePEc: Add citation now
ReVelle, C., Cohon, J., & Shobrys, D. (1991). Simultaneous siting and routing in the disposal of hazardous wastes. Transportation Science, 25(2), 138–145.
- Rolewicz-Kalińska, A. (2016). Logistic constraints as a part of a sustainable medical waste management system. Transportation Research Procedia, 16, 473–482.
Paper not yet in RePEc: Add citation now
Samanlioglu, F. (2013). A multi-objective mathematical model for the industrial hazardous waste location-routing problem. European Journal of Operational Research, 226(2), 332–340.
Saphores, J. D. M., Ogunseitan, O. A., & Shapiro, A. A. (2012). Willingness to engage in a pro-environmental behavior: An analysis of e-waste recycling based on a national survey of U.S. households. Resources Conservation & Recycling, 60(3), 49–63.
- Sauri-Riancho, M. R., Cabañas-Vargas, D. D., Echeverría-Victoria, M., Gamboa-Marrufo, M., Centeno-Lara, R., & Mendez-Novelo, R. I. (2011). Locating hazardous waste treatment facilities and disposal sites in the State of Yucatan, Mexico. Environmental Earth Sciences, 63(2), 351–362.
Paper not yet in RePEc: Add citation now
- Sawalem, M., Selic, E., & Herbell, J. D. (2009). Hospital waste management in Libya: A case study. Waste Management, 29(4), 1370–1375.
Paper not yet in RePEc: Add citation now
- Scott, M. P. (1987). Applications of risk assessment techniques to hazardous waste management. Waste Management & Research, 5(2), 173–181.
Paper not yet in RePEc: Add citation now
- Shanmugasundaram, J., Soulalay, V., & Chettiyappan, V. (2012). Geographic information system-based healthcare waste management planning for treatment site location and optimal transportation routing. Waste Management & Research, 30(6), 587–595.
Paper not yet in RePEc: Add citation now
- Sheu, J. B. (2007). A coordinated reverse logistics system for regional management of multi-source hazardous wastes. Computers & Operations Research, 34(5), 1442–1462.
Paper not yet in RePEc: Add citation now
- Shih, L. H. (2001). Reverse logistics system planning for recycling electrical appliances and computers in Taiwan. Resources, Conservation, and Recycling, 32(1), 55–72.
Paper not yet in RePEc: Add citation now
- Shih, L. H., & Chang, H. C. (2001). A routing and scheduling system for infectious waste collection. Environmental Modeling & Assessment, 6(4), 261–269.
Paper not yet in RePEc: Add citation now
- Shih, L. H., & Lin, Y. T. (2003). Multicriteria optimization for infectious medical waste collection system planning. Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management, 7(2), 78–85.
Paper not yet in RePEc: Add citation now
- Shokohyar, S., & Mansour, S. (2013). Simulation-based optimization of a sustainable recovery network for Waste from Electrical and Electronic Equipment (WEEE). International Journal of Computer Integrated Manufacturing, 26(6), 487–503.
Paper not yet in RePEc: Add citation now
- Shrivastava, P., Zhang, H. C., Li, J. Z., & Whitely, A. (2005). Evaluating obsolete electronic products for disassembly, material recovery and environmental impact through a decision support system. In International symposium on electronics and the environment (pp. 221–225). IEEE Computer Society.
Paper not yet in RePEc: Add citation now
- Simic, V., & Dimitrijevic, B. (2019). End-of-life vehicle management: a survey of logistics network design models[R]. In Proceedings of the 4th logistics international conference (pp. 244–251).
Paper not yet in RePEc: Add citation now
- Slack, R. J., Gronow, J. R., & Voulvoulis, N. (2009). The management of household hazardous waste in the United Kingdom. Journal of Environmental Management, 90(1), 36–42.
Paper not yet in RePEc: Add citation now
- Song, B. D., Morrison, J. R., Ko, Y. D., Van Santen, A., & Voulvoulis, N. (2013). Efficient location and allocation strategies for undesirable facilities considering their fundamental properties. Computers & Industrial Engineering, 65(3), 475–484.
Paper not yet in RePEc: Add citation now
- Song, Q., & Li, J. (2014). A review on human health consequences of metals exposure to, e-waste in China. Environmental Pollution, 196, 450–461.
Paper not yet in RePEc: Add citation now
- Song, X. L., Wang, J. W., Yang, J. X., & Lu, B. (2017). An updated review and conceptual model for optimizing WEEE management in China from a life cycle perspective. Frontiers of Environmental Science & Engineering, 11(5), 1–12.
Paper not yet in RePEc: Add citation now
- Srivastava, S. K. (2007). Green supply chain management: A state-of-the-art literature review. International Journal of Management Reviews, 9(1), 53–80.
Paper not yet in RePEc: Add citation now
Stowers, C. L., & Palekar, U. S. (1993). Location models with routing considerations for a single obnoxious facility. Transportation Science, 27(4), 350–362.
- Sun, X., Liu, X., Li, F., et al. (2017). Comprehensive evaluation of different scale cities’ sustainable development for economy, society, and ecological infrastructure in China. Journal of Cleaner Production, 163, S329–S337. https://doi.org/10.1016/j.jclepro.2015.09.002 .
Paper not yet in RePEc: Add citation now
- Tanskanen, P. (2013). Management and recycling of electronic waste. Acta Materialia, 61(3), 1001–1011.
Paper not yet in RePEc: Add citation now
- Tao, J. G. (2008). Decision support system for E-waste reverse logistics based on the internet. In International conference of production and operation management (pp. 1328–1331).
Paper not yet in RePEc: Add citation now
- Taslimi, M., Batta, R., & Kwon, C. (2020). Medical waste collection considering transportation and storage risk. Computers & Operations Research, 120, 104966.
Paper not yet in RePEc: Add citation now
- Tesfaye, F., Lindberg, D. K., Hamuyuni, J., Taskinen, P., & Hupa, L. (2017). Improving urban mining practices for optimal recovery of resources from e-waste. Minerals Engineering, 111(C), 209–221.
Paper not yet in RePEc: Add citation now
- Triantafyllou, M. K., & Cherrett, T. J. (2010). The logistics of managing hazardous waste: A case study analysis in the UK retail sector. International Journal of Logistics: Research and Applications, 13(5), 373–394.
Paper not yet in RePEc: Add citation now
- Tsakona, M., Anagnostopoulou, E., & Gidarakos, E. (2007). Hospital waste management and toxicity evaluation: A case study. Waste Management, 27(7), 912–920.
Paper not yet in RePEc: Add citation now
- Tuzkaya, G., Onüt, S., Tuzkaya, U. R., & Gulsun, B. (2008). An analytic network process approach for locating undesirable facilities: An example from Istanbul, Turkey. Journal of Environmental Management, 88(4), 970–983.
Paper not yet in RePEc: Add citation now
- Ulukan, H. Z., & Kop, Y. (2009). A two-step solution procedure to a fuzzy medical waste disposal facility location problem. In Joint international-fuzzy-systems-association world congress (pp. 1450–1455).
Paper not yet in RePEc: Add citation now
- US Environmental Protection Agency (2009). Retrieved 7 May 2021, from https://www.epa.gov/hw/learn-basics-hazardous-waste#hwid .
Paper not yet in RePEc: Add citation now
- Vadoudi, K., Kim, J., Laratte, B., Lee, S. J., & Troussier, N. (2015). E-waste management and resources recovery in France. Waste Management & Research the Journal of the International Solid Wastes & Public Cleansing Association ISWA, 33(10), 919–929.
Paper not yet in RePEc: Add citation now
Van Engeland, J., Beliën, J., De Boeck, L., & De Jaeger, S. (2020). Literature review: Strategic network optimization models in waste reverse supply chains. Omega, 91, 102012.
- Voudrias, E., & Graikos, A. (2014). Infectious medical waste management system at the regional level. Journal of Hazardous, Toxic, and Radioactive Waste, 18(4), 04014020.
Paper not yet in RePEc: Add citation now
- Wagner, T. P., Toews, P., & Bouvier, R. (2013). Increasing diversion of household hazardous wastes and materials through mandatory retail take-back. Journal of Environmental Management, 123, 88–97.
Paper not yet in RePEc: Add citation now
- Walery, M. (2014). Medical waste management planning system in the context of the model studies duration. Rocznik Ochrona Srodowiska, 16, 260–278.
Paper not yet in RePEc: Add citation now
- Walery, M. J. (2017). Impact of capital and current costs changes of the incineration process of the medical waste on system management cost. IOP Conference Series: Earth and Environmental Science, 95(4), 042014.
Paper not yet in RePEc: Add citation now
- Wang, F., Lai, X., & Shi, N. (2011). Multi-Objective optimization for green supply chain network design. Decision Support Systems, 51(2), 262–269.
Paper not yet in RePEc: Add citation now
- Wei, S., & Zhang, K. (2008). Optimization model of e-waste reverse logistics and recycling network. In International conference on intelligent system and knowledge engineering, 2008, 1436–1442. IEEE.
Paper not yet in RePEc: Add citation now
- White, C. D., Masanet, E., Rosen, C. M., & Beckman, S. L. (2003). Product recovery with some byte: An overview of management challenges and environmental consequences in reverse manufacturing for the computer industry. Journal of Cleaner Production, 11(4), 445–458.
Paper not yet in RePEc: Add citation now
- Wilson, C. A., Matthews, K., Pulsipher, A., & Wang, W. H. (2016). Using geographic information systems to determine site suitability for a low-level radioactive waste storage facility. Health Physics, 110(2 Suppl 1), S17.
Paper not yet in RePEc: Add citation now
- Woodruff, T. J., & Sutton, P. (2014). The Navigation Guide systematic review methodology: A rigorous and transparent method for translating environmental health science into better health outcomes. Environmental Health Perspectives, 122(10), 1007–1014.
Paper not yet in RePEc: Add citation now
- Wu, H. L., Tao, F. M., & Yang, B. (2020). Optimization of vehicle routing for waste collection and transportation. International Journal of Environmental Research and Public Health, 17, 4963.
Paper not yet in RePEc: Add citation now
- Wyman, M. M., & Kuby, M. (1995). Proactive optimization of toxic waste transportation, location, and technology. Location Science, 3(3), 167–185.
Paper not yet in RePEc: Add citation now
- Xia, K., Gao, L., Wang, L. H., Li, W. D., Li, X. Y., & Ijomah, W. (2016). Service-oriented disassembly sequence planning for electrical and electronic equipment waste. Electronic Commerce Research & Applications, 20, 59–68.
Paper not yet in RePEc: Add citation now
- Yao, L., Xu, Z., & Zeng, Z. (2020). A soft-path solution to risk reduction by modeling medical waste disposal center location-allocation optimization. Risk Analysis, 40(9), 1863–1886. https://doi.org/10.1111/risa.13509 .
Paper not yet in RePEc: Add citation now
- Yeh, C.-H., & Xu, Y. (2013). Sustainable planning of e-waste recycling activities using fuzzy multicriteria decision making. Journal of Cleaner Production, 2013, 194–204.
Paper not yet in RePEc: Add citation now
- Yesilnacar, M. I., & Cetin, H. (2005). Site selection for hazardous wastes: A case study from the GAP area, Turkey. Engineering Geology, 81(4), 371–388.
Paper not yet in RePEc: Add citation now
- Yilmaz, O., Kara, B. Y., & Yetis, U. (2017). Hazardous waste management system design under population and environmental impact considerations. Journal of Environmental Management, 203, 720–731.
Paper not yet in RePEc: Add citation now
- Yin, J. (2008). A fuzzy optimization modeling and algorithm on hazardous waste reverse logistics. In International conference on wireless communications, networking, and mobile computing (Vol. 2008, pp. 1–4). IEEE.
Paper not yet in RePEc: Add citation now
- Yong, Z., Xu, L., Hai, M., & Cheng, M. (2007). Designing a hazardous-waste reverse logistics network for third party logistics supplier under the fuzzy environment. In IEEE international conference on Service operations and logistics, and informatics, 2007. SOLI 2007 (pp. 1–6). IEEE.
Paper not yet in RePEc: Add citation now
- Yoon, N. H., & Jang, Y. C. (2006). The practice and challenges of electronic waste recycling in Korea with emphasis on extended producer responsibility (EPR). In IEEE international symposium on electronics and the environment (Vol. 2006, pp. 326–330). IEEE.
Paper not yet in RePEc: Add citation now
- Yu, H., & Solvang, W. D. (2016). Improved multi-objective programming with augmented ε-constraint method for hazardous waste location-routing problems. International Journal of Environmental Research and Public Health, 13(6), 548.
Paper not yet in RePEc: Add citation now
- Yu, H., Sun, X., & Solvang, W. D. (2020). A stochastic network design problem for hazardous waste management. Journal of Cleaner Production, 277, 123566.
Paper not yet in RePEc: Add citation now
- Yuksel, H. (2009). An analytical hierarchy process decision model for e-waste collection center location selection. In International conference on computers & industrial engineering (Vol. 2009, pp. 1684–1689). IEEE.
Paper not yet in RePEc: Add citation now
- Zeng, X. L., Song, Q. B., Li, J. H., Yuan, W. Y., Duan, H. B., & Liu, L. L. (2015). Solving e-waste problem using an integrated mobile recycling plant. Journal of Cleaner Production, 90, 55–59.
Paper not yet in RePEc: Add citation now
- Zhang, H. Y., Zhang, J., Liu, X. C., Yan, G. H., & Liu, Y. Z. (2012). Research on the method of health assessment about the destruction equipment for high-risk hazardous chemical waste. Procedia Environmental Sciences, 16, 192–201.
Paper not yet in RePEc: Add citation now
- Zhang, Y., & Zhao, J. (2011). Modeling and solution of the hazardous waste location-routing problem under uncertain conditions. In ICTE (pp. 2922–2927).
Paper not yet in RePEc: Add citation now
- Zhao, J., & Huang, L. X. (2019). Multi-period network design problem in regional hazardous waste management systems. International Journal of Environmental Research and Public Health, 16, 11.
Paper not yet in RePEc: Add citation now
Zhao, J., & Ke, G. Y. (2017). Incorporating inventory risks in location-routing models for explosive waste management. International Journal of Production Economics, 193, 123–136.
- Zhao, J., & Verter, V. (2015). A bi-objective model for the used oil location-routing problem. Computers & Operations Research, 62, 157–168.
Paper not yet in RePEc: Add citation now
- Zhao, J., & Zhao, J. (2010). Model and algorithm for hazardous waste location-routing problem. In ICLEM 2010: Logistics for sustained economic development: Infrastructure, information, integration (p. 2843–2849).
Paper not yet in RePEc: Add citation now
Zhao, J., & Zhu, F. (2016). A multi-depot vehicle-routing model for explosive waste recycling. International Journal of Production Research, 54(2), 550–563.
Zhao, J., Huang, L. X., & Lee, D. H. (2016). Improved approaches to the network design problem in regional hazardous waste management systems. Transportation Research Part e: Logistics and Transportation Review, 88, 52–75.
Zoeteman, B. C. J., Krikke, H. R., & Venselaar, J. (2010). Handling WEEE waste flows: On the effectiveness of producer responsibility in a globalizing world. International Journal of Advanced Manufacturing Technology, 47(5–8), 415–436.
- Zografros, K. G., & Samara, S. (1990). Combined location-routing model for hazardous waste transportation and disposal. Transportation Research Record, 1245, 52–59.
Paper not yet in RePEc: Add citation now