9223
0 likes40 views
This document summarizes a load cell model 9223 produced by Revere. It is a double-link beam load cell made of stainless steel suitable for truck, rail, tank, bin, and hopper scales. It has capacities ranging from 50,000 to 125,000 lbs and is certified to NTEP class III standards. The document provides specifications, dimensions, wiring details, and operating parameters of the load cell. It also includes a legal disclaimer notice from Vishay Precision Group.
9223
- 1. Revere www.vpgtransducers.com 1 Model 9223 Technical contact in Americas: lc.usa@vishaypg.com; Europe: lc.eur@vishaypg.com; Asia: lc.asia@vishaypg.com Document No.: 11812 Revision: 31-May-2012 Double-Link Beam Load Cell FEATURES • Capacities: 50k to 125k lbs • Stainless steel construction • Certified to NTEP class IIIL 10000 divisions • Sealing: IP68 • Low profile, self-checking and self-centering • Optimized design specially for weighbridge use • Optional conduit adapter • Optional ❍❍ FM approved for use in potentially explosive atmospheres APPLICATIONS • Truck scales • Railroad track scales • “Legal for Trade” tank, bin and hopper weighing DESCRIPTION The 9223 is a hermetically sealed, end loaded, center supported double-ended shear beam. This product is suitable for a wide range of truck and rail scales. It is designed to use parallel link loading, considered by many weighing experts to be advantageous when compared to other loading techniques. Fully welded stainless steel seals ensure high environmental integrity and provided that additional cable sealing is used, occasional submersion can occur without damage. These products meet the stringent Weights and Measures requirements throughout USA. OUTLINE DIMENSIONS in inches Cable specifications: Cable length: 40 feet + Excitation Red – Excitation Black + Output Green – Output White Shield Transparent Cable screen is not connected to load cell body. Performance may be affected if load cell cables are shortened. CAPACITY (lbs) 50k, 65k, 100k, 125k A 8.50 B 4.25 C RAD 1.00 D 2.94 F 2.94 J 2.20 L 10.25 M 5.13 N 2.40 P 2.06 S RAD 1.00 T 0.25 U 2.25 Double-Link Beam Load Cell Document No.: 11812 Revision: 31-May-2012 Model 9223
- 2. Revere www.vpgtransducers.com 2 Model 9223 Technical contact in Americas: lc.usa@vishaypg.com; Europe: lc.eur@vishaypg.com; Asia: lc.asia@vishaypg.com Document No.: 11812 Revision: 31-May-2012 Double-Link Beam Load Cell SPECIFICATIONS PARAMETER VALUE UNIT Standard capacities (Emax) 50k, 65k, 100k, 125k lbs Accuracy class according to NTEP NTEP IIIL Non-Approved Maximum no. of verfication intervals (nlc) 10000 Rated output (=S) 3 mV/V Rated output tolerance 0.003 ±% mV/V Zero balance 1.0 ±% FSO Combined error 0.0200 0.0500 ±% FSO Non-repeatability 0.0100 0.0200 ±% FSO Creep error (20–30 minutes) 0.0300 0.0300 ±% applied load Temperature effect on on minimum dead load output 0.0008 (0.0140) ±% FSO/°F (/5°C) Temperature effect on sensitivity 0.0010 (0.0070) ±% applied load/°F (/5°C) Compensated temperature range –10 to +40 (+14 to 104) °C (°F) Operating temperature range –53 to +93 (-65 to +200) °C (°F) Safe load limit 150 % Emax Ultimate load 300 % Emax Safe side load limit 100 % Emax Excitation voltage recommended 10 V Excitation voltage maximum 15 V Input resistance 700±7 Ω Output resistance 700±7 Ω Insulation resistance ≥5000 MΩ Environmental protection IP68 Element material Stainless steel ASTM FSO—Full Scale Output All specifications subject to change without notice.
- 3. Vishay Precision Group, Inc. www.vpgsensors.com 1 Legal Disclaimer Notice Document No.: 63999 Revision: 15-Jul-2014 Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. You should ensure you have the current version of the relevant information by contacting VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of VPG. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale. Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Copyright Vishay Precision Group, Inc., 2014. All rights reserved. Disclaimer Legal Disclaimer Notice