DOOR INTERLOCKING SYSTEM PPT
- 3. We are glad to introduce ourselves as pioneers in manufacturing Door interlocking system with micro controller/processor based with Electro Magnetic Locks to control cross contamination and air conditioning lossesi n clean rooms, sterile areas and pass boxes. System Description: Interlocking system can control two or more doors in a way that to give access to any one door and it will never allow to open any adjacent two doors simultaneously. The following are the most important characteristics of the interlocking system Two Doors Closed mode: In this mode both doors are closed and locked by means of electro Magnetic Lock or Electric Door Strike. Anyone who wants to get the access can enter by passing the push button switch. When the first door is opened second door remain closed till the first one is closed i.e. both doors will not open simultaneously. There by you are preventing clean air contamination and you are saving air conditioning losses.
- 4. Two Door Open Mode: In this mode both doors are in normally closed condition by means of door closure but unlocked. By opening door-1, door- 2 automatically gets locked and will not open till the first door is closed. Our control panels are available in 2-door, 4-door, 8-door & 16-door control models. In case of any emergency like fire, our system is coming with 2 relay outputs one will open all the doors another relay close all the doors in special protection areas. According to your applications we will provide customized solutions. We are satisfying our customers in pharmacy industry for the past 20 years by providing accurate & adequate systems according to their requirement with lowest possible prices.
- 5. Our Systems are very much applicable in the following areas. Clean rooms Pass boxes Air locks Pass through modules Bio clean workbench Air showers Clean room garment locker Operation theatres ICU’s etc., DOOR INTERLOCKING SYSTEM
- 6. Switches
- 8. Door Interlocking Control Panel
- 9. Technical Specifications For Control Panel SNO PARAMETER SPECIFICATIONS 1 Power supply 230V, ±10% 50 Hz single phase 2 Operating voltage 12V D.C 3 Absorbed Current 500mAmp for control panel 4 No. of manoeuvres in 24 h Continuous service 5 Environmental conditions -15° C to +60° C 6 Control unit weight 0.4kg 7 Enclosure M.S Body powder coated / SS
- 10. Technical Specifications For Feather Touch Switches Operating voltage: 2.5V D.C Absorbed Current: 30 mAmp Technical Specifications For Magnetic Contact Operating voltage : 3.5 V D.C Absorbed Current : 25 mAmp
- 11. CONTACT US Shalom Enterprises, Plot No – 412, Mallareddy Nagar, Gajularamaram, Qutubullapur Mandal, Hyderabad– 500 055, Ph : 040 – 3100 7374 /94, E mail : info@shalomsystems.net mktg@shalomsystems.net Web : www.shalomsystems.net Mumbai Branch Mr. Mark Vyas Cont: 9869083170 E mail: mark@shalomsystems.net Web : www.shalomsystems.net
- 12. Thank You