What LTE Parameters need to be Dimensioned and Optimized

8/4/2014 © CelPlan International, Inc. www.celplan.com 1
What LTE parameters need to be
Dimensioned and Optimized
Leonhard Korowajczuk
CEO/CTO
CelPlan International, Inc.
www.celplan.com
webinar@celplan.com

Presenter
• Leonhard Korowajczuk
– CEO/CTO CelPlan International
– 45 years of experience in the telecom field (R&D,
manufacturing and service areas)
– Holds13 patents
– Published books
• “Designing cdma2000 Systems”
– published by Wiley in 2006- 963 pages, available in hard
cover, e-book and Kindle
• “LTE , WiMAX and WLAN Network Design, Optimization
and Performance Analysis ”
– published by Wiley in June 2011- 750 pages, available in hard
cover, e-book and Kindle
– Books in Preparation:
• LTE , WiMAX and WLAN Network Design,
Optimization and Performance Analysis
– second edition (2014) LTE-A and WiMAX 2.1(1,000+
pages)
• Network Video: Private and Public Safety
Applications (2014)
• Backhaul Network Design (2015)
• Multi-Technology Networks: from GSM to LTE (2015)
• Smart Grids Network Design (2016)
2nd edition

CelPlan International
• Employee owned enterprise
with international presence
– Headquarters in USA
– 450 plus employees
– Twenty (20) years in business
• Subsidiaries in 6 countries
with worldwide operation
• Vendor Independent
• Network Design Software
(CelPlanner
Suite/CellDesigner)
• Network Design Services
• Network Optimization
Services
• Network Performance
Evaluation
• Services are provided to
equipment vendors, operators
and consultants
• High Level Consulting
– RFP preparation
– Vendor interface
– Technical Audit
– Business Plan Preparation
– Specialized (Smart Grids,
Aeronautical, Windmill, …)
• Network Managed Services
• 2G, 3G, 4G, 5G Technologies
• Multi-technology / Multi-band
Networks
• Backhaul, Small cells, Indoor,
HetNet, Wi-Fi offloading

CelPlan Webinar Series
• How to Dimension user Traffic in 4 G networks
• May 7th 2014
• How to Consider Overhead in LTE Dimensioning and what is the
impact
• June 4th 2014
• How to Take into Account Customer Experience when Designing a
Wireless Network
• July 9th 2014
• LTE Measurements what they mean and how they are used?
• August 6th2014
• What LTE parameters need to be Dimensioned and Optimized? Can
reuse of one be used? What is the best LTE configuration?
• September 3rd 2014/ September 17th, 2014
• Spectrum Analysis for LTE Systems
• October 1st 2014
• MIMO: What is real, what is Wishful Thinking?
• November 5th 2014
• Send suggestions and questions to: webinar@celplan.com

Webinar 1 (May 2014)
How to Dimension User Traffic in 4G
Networks
Participants from 44 countries
Youtube views: 821

User Traffic
1. How to Dimension User Traffic in 4G Networks
2. How to Characterize Data Traffic
3. Data Speed Considerations
4. How to calculate user traffic?
5. Bearers
6. User Applications Determination
7. User Distribution

Webinar 2 (June 2014)
How to consider overhead in LTE
dimensioning
and what is the impact
Youtube views: 430

Overhead in LTE
1. Reuse in LTE
2. LTE Refresher
1. Frame
2. Frame Content
3. Transmission Modes
4. Frame Organization
1. Downlink Signals
2. Uplink Signals
3. Downlink Channels
4. Uplink Channels
5. Data Scheduling and Allocation
6. Cellular Reuse
3. Dimensioning and Planning
4. Capacity Calculator

Webinar 3 (July 2014)
How to consider Customer Experience
when designing a wireless network
Youtube views: 315

Customer Experience
1. How to evaluate Customer Experience?
2. What factors affect customer experience?
3. Parameters that affect cutomer experience
4. SINR availability and how to calculate it
5. Conclusions
6. New Products

Webinar 4 (August 6th, 2014)
LTE Measurements
What they mean?
How are they used?
Youtube views: 373

LTE Measurements
1. Network Measurements
1. UE Measurements
• RSRP
• RSSI and its variations
• RSRQ and its variations
• RSTD
• RX-TX Time Difference
2. Cell Measurements
• Reference Signal TX Power
• Received Interference Power
• Thermal Noise Power
• RX-TX Time Difference
• Timing Advance
• Angle of Arrival
3. Measurement Reporting
• Intra-LTE
• Inter-RAT
• Event triggered
• Periodic
2. Field Measurements
1. 1D Measurements
• RF propagation model calibration
• Receive Signal Strength Information
• Reference Signal Received Power
• Reference Signal Received Quality
• Primary Synchronization Signal
power
• Signal power
• Noise and Interference Power
• Fade Mean
2. 2D Measurements
• Primary Synchronization Signal
Power Delay Profile
3. 3D measurements
• Received Time Frequency Resource
Elements
• Channel Frequency response
• Channel Impulse Response
• Transmit Antenna Correlation
• Traffic Load
4. Measurement based predictions

Webinar 5 (September 3rd, 2014)
Part 1- Downlink
Youtube views: 574

Webinar 5 (September 16th, 2014)
Part 2- Uplink
Today

Next Events

Webinar 6
Spectrum Analysis for LTE Systems
October 1st 2014
Registration is open

Spectrum Analysis for LTE Systems
• LTE is an OFDM broadband
technology, with very wide channels.
Narrow band channels present similar
fading characteristics in its bandwidth,
with variations restricted only to time
dimension. Wide band channels vary
in the frequency domain also. The
designer has to have a full
understanding of this variations and
this information is not available with
traditional test gear
• Until today designers had to guess
multipath and fading performance,
but the deployment of wide band
channels and MIMO techniques
require a precise understanding of
this effect geographically
– This requires 2D and 3D analysis
• Decisions as where to deploy cells,
what number of antennas to use and
parameter settings, can represent
huge capital (CAPEX) savings and
reduce operational costs (OPEX)
• RF Parameter Characterization in Broadband Channels
• Traditional Spectrum Analysis
• LTE Performance Spectrum Analysis
• Network Characterization though Drive Test
• Drive Test Devices
– Software Defined Receivers
– Spectrum recording
• Visualizing Measurements in Multiple Dimensions
– 1 Dimension
– 2 Dimensions
– 3 Dimensions
• Measurement Interpolation and Area Prediction
• Explaining LTE Measurement Content
– RX Signal Strength per RE
– Noise Filtered Channel Response for each RS
– RF Channel Response for RS carrying OFDM symbols
– RF Channel Response for all OFDM symbols
– Impulse Response for each RS Carrying OFDM symbol
– Multipath Delay Spread
– Reference Signal Received Power
– Receive Signal Strength Indicator: full OFDM symbols
– Receive Signal Strength Indicator: RS RE of OFDM symbols
– Receive Signal Strength Indicator: PBCH
– Reference Signal Received Quality: full OFDM symbols
– Reference Signal Received Quality: RS RE of OFDM symbols
– Reference Signal Received Quality: PBCH
– PSS Power Distribution Profile
– PSS Power
– Frequency Fade Mean
– Frequency Fade Variance
– Signal power
– Noise Power
– Signal to Noise and Interference Ratio
– Antenna Correlation
– LTE Frame Traffic Load

Webinar 7
MIMO
What is Real?
What is Wishful Thinking?
November 5th 2014
Registration is open

LTE Technology, Network Design &
Optimization Boot Camp
December 8 to 12, 2014
at University of West Indies (UWI)
St. Augustine, Trinidad

LTE Technology, Network Design &
Optimization Boot Camp
• December 8 to 12, 2014
• Based on the current book and updates from the soon-to-be published 2nd edition of,
"LTE, WiMAX, and WLAN: Network Design, Optimization and Performance Analysis",
by Leonhard Korowajczuk, this -day course presents students with comprehensive
information on LTE technology, projects, and deployments.
• CelPlan presents a realistic view of LTE networks, explaining what are just marketing
claims and what can be achieved in real life deployments. Each module is taught by
experienced 4G RF engineers who design and optimize networks around the globe.
• The materials provided are based upon this experience and by the development of
industry leading planning & optimization tools, such as the CelPlanner Software Suite,
which is also provided as a 30-day demo to each student
• Module A: LTE Technology
– Signal Processing Applied to Wireless Communications
– LTE Technology Overview
– Connecting to an LTE network: an UE point of view
– How to calculate the capacity of an LTE cell and network
– Understanding scheduling algorithms
– LTE measurements and what they mean
– Understanding MIMO: Distinguishing between reality and wishful thinking
– Analyzing 3D RF broadband drive test

LTE Technology, Network Design
& Optimization Boot Camp
• Module B: LTE Network Design
– Modeling the LTE Network
– Building Network Component Libraries
– Modeling user services and traffic
– Creating Traffic Layers
– RF Propagation Models and its calibration
– Signal Level Predictions
– LTE Predictions
– LTE Parameters
– LTE Resource Optimization
– LTE Traffic Simulation
– LTE Performance
– Interactive Workshop (sharing experiences)
• 4G Certification (Optional)
• Additional information, Pricing & Registration available at www.celplan.com

Today’s Feature Presentation

Part 2- Uplink
September 17, 2014
Today’s Webinar

Content
1. LTE Refresher
1. User Traffic
2. Overhead
3. Downlink Frame
4. Uplink Frame
5. Zadoff-Chu
6. Orthogonality
1. Dot Product
7. Interference
2. Network Planning
1. BTS and Cell ID
2. Link Budget
3. Channel/ Resource
Assignment
1. Strategy
2. Testing
3. Spectrum Usage
4. FFR
5. Single Carrier
6. Three Carriers
4. Neighborhood
5. Tracking Area
6. Tools
3. Downlink
1.PCI Planning
1. PSS
2. SSS
3. Cell RS
4. Uplink Group Base Sequence
5. PCI Planning
2.Dimensioning
1. CP
2. PFICH
3. PHICH
4. PDCCH (RNTI, CCE)
5. PDSCH (RBG)
6. PDSCH Resource Allocation
7. Downlink Power
3.Traffic Allocation
1. RRM
2. RRC
3. PDCP
4. MAC
5. PHY
1. Transmission Modes
2. PDCCH Resource Allocation (DCI)
3. PDSCH Resource Allocation (MCS, TBS)
4.Summary
4. Uplink
1. Random
1. Random Access Procedure 1
2. PRACH
1. RACH
2. PRACH Format
3. Configuration Index
4. Frequency Offset
5. Zero Correlation Zone
6. High Speed Flag
7. Root Sequence Index
3. Random Access Procedure 2
2. Control and Data
1. DMRS
2. PUCCH
3. PUSCH
4. SRS
5. Resource Optimization
1. Reuse
2. Resource Planning
3. Small Cells / HetNet
4. ICIC
6. Summary

4. Uplink Dimensioning
Random Access
Control and Data

4.1 Random Access Area

Random Access Process
• Random Access is a process used by UEs to access packet networks
– Ethernet uses Carrier Sense Multiple Access with Collision Detection
(CSMA/CD)
– Wi-Fi uses Carrier Sense Multiple Access with Collision Avoidance
(CSMA/CA)
• 3GPP specified for LTE uplink a Random Access procedure
• LTE UEs access to the uplink frame is done through a contention process
– LTE dedicates a portion of the uplink frame for the contention to happen
– This portion is called Physical Random Access Channel (PRACH)
• In LTE Random Access process is used for:
– Initial access to eNB: RRC Idle Mode to RRC Connected Mode transition
– Provide information for eNB to calculate the Timing Advance to be used by
the UE
– Request eNB for uplink resource allocation
– Complete and intra-system handover
• Random Access parameters are broadcasted by eNB in SIB1 (System
information Block 1) and SIB2 (System Information Block 2), which
should be read by the UE before accessing the network
– These parameters should be dimensioned by the network designer

SIB1 Random Access Parameters
SIB 1 parameters for Random Access
Maximum UE transmit Power ≤ 23 dBm
System Information Periodicity 8, 16, 32, 64, 128, 256, 512 frames
SIB mapping 1 to 32 instances

SIB2 Random Access Parameters
• System Information Block 2, broadcasted Random Access Parameters
– SIB 2 periodicity is scheduled in SIB 1 (8, 16, 32, 64,128, 256, 512 frames)
PRACH Configuration Parameters Range
Root Sequence Index 0 to 837
PRACH Configuration Index 0 to 63
High Speed Flag true/false
Zero Correlation Zone Configuration 0 to 15
PRACH Frequency Offset 0 to 94 RB
RACH Configuration Range Step
Number of RA Preambles 4 to 64 4
Size of RA Preamble Group A 4 to 60 4
Message Size Group A 56, 144, 208, 256 bit
Message Power Offset Group B -∞. 0, 5, 8, 10, 12, 15, 18 dB
Power Ramping Step 0, 2, 4, 6 dB
Preamble Initial Received Target Power -120 to -90 dBm 2 dB
Preamble Maximum Transmissions 3, , 5, 6, 7, 8, 10, 20, 50, 100, 200
RA Response Window Size 2, 3, 4, 5, 6, 7, 8, 10 subframes
MAC Contention Resolution Timer 8, 16, 24, 32, 40, 48, 56, 64 subframes
Maximum HARQ Message Transmissions 1 to 8 1
PDSCH Configuration Range
Reference Signal Power -50 to -60 dBm
Power Boost (PB) 0 to 3

Random Access Area Design
• PRACH area has to accommodate requests from all UEs connected to eNB
• Several UEs will access PRACH at the same time
– 3GPP designed PRACH to provide 64 codes for simultaneous access
– The codes do not carry any information besides:
• An UE is requesting access, has chosen the code it is accessing and requests its timing advance information
• The PRACH area removes capacity from the uplink access
• 3GPP reserved 6 PRBs x 1 to 3 subframes for the Random Access
– The uplink frame is formed at the eNB antenna by the contribution of UEs that are accessing it at
that time
– UEs assume that they are close to the eNB when accessing PRACH, so they transmit based
synchronized in time with when they receive the eNB transmitted downlink frame
– UEs transmissions will arrive delayed in time, proportionally to its distance to eNB (2 μs per 300 m)
• An UE at 3 km from cell center, will arrive with a delay of 20 μs
– The orthogonal codes should accommodate this delay, so 3GPP selected the Zadoff-Chu code for the
access
– A Zadoff-Chu (ZC) sequence is orthogonal to its time shifted sequences, although ZC sequences are
not orthogonal between themselves
• 3GPP had to consider:
– A Cyclic Prefix (CP)area that would accommodate the round trip between eNB and UE
– A Preamble (P) area that would carry the Zadoff-Chu code
– A Guard Time (GT)at the end of the symbol that would avoid interference outside the subframe
• The basic PRACH was designed for a cell range of 15 km, which leads to a CP and GT of
approximately 100 μs
• This left inside the subframe 800 μs for the Preamble symbol, which corresponds to a
symbol width in frequency of 1.25 KHz

LTE Frame UL
• Allocation
– Green: Control
– Light Red: DL Quality 1
– Orange: ACK/NACK
– Red: DL Quality 2
– Blue: Random Access
– Light Blue: Not Used
– Orange: Assigned Subcarriers
Slot(0.5ms)
0
1
0
Sub-Frame(1ms)
839 subcarriers
1.25 kHz
1 symbol
800μs
2
3
1
1 OFDM Carrier (5 MHz- 25 Resource Blocks)
Central Sub-carrier
Cyclic Prefix- Extended Null Sub-carriersResource Block
12 sub-carriers
per 1 slot
Null Sub-carriers
ResourceBlock
12sub-carriers
per1slot
1OFDMSymbol
slot
0
slot
1
subframe0
0.5ms
1ms
frame10ms
slot
2
slot
3
subframe1
slot
4
slot
5
subframe2
slot
6
slot
7
subframe0subframe3
slot
8
slot
9
subframe0subframe4
slot
10
slot
11
subframe0subframe5
slot
12
slot
13
subframe0subframe6
slot
14
slot
15
subframe0subframe7
slot
16
slot
17
subframe0subframe8
slot
18
slot
19
subframe0subframe9
Frequency
Time
PUCCH PUCCH
PUCCH for DL quality1
PUCCH for SR
PUCCH for ACK/NACK
Demodulation RS
PRACH
Allocated RB
Non allocated RB
Sounding RS
Resource Block
Cyclic Prefix
UE 1 UE 2 UE 3
Cyclic Prefix
Guard Time
Symbol0Symbol1Symbol2Symbol3Symbol4Symbol5Symbol6
slot0.5ms=15360Ts
2048Ts
160Ts144Ts
Slot(0.5ms)0
1
0
Sub-Frame(1ms)
2
3
1
4
5
2
6
7
3
8
9
4
1
0
1
1
5
1
2
1
3
6
1
4
1
5
7
1
6
1
7
8
1
8
1
9
9
Central Sub-carrier
12 sub-carriers
per 1 slot
Null Sub-carriers
1 OFDM
Symbol
PUCCH for SR
PUCCH for ACK/NACK
Demodulation RS
PRACH
Allocated RB
Non allocated RB
Sounding RS
ResourceBlock
12sub-carriers
per1slot
Resource Block

PRACH

• 3GPP specifies 5 Formats for the PRACH area, denominated PRACH
Configuration Indexes (PRACHCI)
• To accommodate larger cells a 2 and 3 subframes formats were
created
• In some of the formats the preamble symbol is repeated twice, so it
can be more easily detected
• The last format was developed for small TDD cells, allocating PRACH
during the TDD special frames
Preamble
Format
Duplex
RACH
sub-
carriers
Sub-carrier
width (kHz)
Total
width
(kHz)
Cell
sub-
carriers
RBs
PRACH
CP (μs)
PRACH
Symbols
Sequence
(us)
Guard
Time
(μs)
Total
duration
(μs)
Sub-
frames
Maximum
Cell Range
(km)
Cell size
0 FDD & TDD 839 1.25 1,049 69.92 6 103.13 1 800 96.88 1000 1 14.5 medium cells
1 FDD & TDD 839 1.25 1,049 69.92 6 684.38 1 800 515.63 2000 2 77.3 very large cells
2 FDD & TDD 839 1.25 1,049 69.92 6 203.13 2 1600 196.88 2000 2 29.5 large cells
3 FDD & TDD 839 1.25 1,049 69.92 6 684.38 2 1600 715.63 3000 3 107.3 extra large cells
4 TDD 139 7.5 1,043 69.50 6 14.58 0.17 133.33 9.38 157 0.16 1.4 small cells
CP
PREAMBLE
GT
839 1.25 kHz
subcarriers
6 RB
1 subcarrier
1 subframe
Frequency
Time
Number of Root Sequences
Preamble Formats 0 to 3 Preamble Format 4
838 138

• The picture on the left depicts
respectively the PRACH
Configuration indexes 3, 2, 1 and 0
• The picture below depicts the
dimensions of the PRACH area in
frequency and time
CP
PREAMBLE
GT
PREAMBLE
CP
GT
CP
PREAMBLE
PREAMBLE
GT
CP
PREAMBLE
PREAMBLE
GT
839 1.25 kHz
subcarriers
839 1.25 kHz
subcarriers
839 1.25 kHz
subcarriers
839 1.25 kHz
subcarriers
6 RB6 RB6 RB6 RB
1 subcarrier
1 subframe
1 subframe
1 subframe
Frequency
Time
Cyclic Prefix
Preamble Sequence
Format 0 to 3
Guard Time
1, 2 or 3
Subframes
1.050 MHz
839 sub-carriers (1.25 KHz spacing)
1.080 MHz
Null
subcarriers
Cyclic Prefix
Preamble Sequence
Format 4
Guard Time
0.16
Subframes
1.050 MHz
139 sub-carriers (7.5 KHz spacing) Null
subcarriers
1.080 MHz
Format 0Format 1Format 2Format 3

Preamble Detection
• eNB detects the preamble based on a fixed window that initiates a
cyclic prefix after the subframe boundary
• This implies that UEs that are distant from eNB will be detected with a
phase shift proportional to the UE distance from cell center
• This cell shift should be considered when allocating Random Area codes
CP
PREAMBLE
UE close
to eNB
GT
1 subframe
at eNB
CP
PREAMBLE
UE in
middle
of cell
GT
CP
PREAMBLE
UE at cell
edge
GT
Start Subframe boundary at eNB
Round trip time + delay spread
Preamble
Observation
Window
at eNB
End Subframe
boundary at eNB
Round trip time
Next
Symbol
CP

RA area according to 3GPP
• 3GPP choose the Zadoff-Chu (ZC) code to provide orthogonallity
– A ZC code is orthogonal to its shifted copies
– Different ZC codes are not fully orthogonal
– ZC code travel time adds to the original shift
• Neighbor cells should use different orthogonal codes to avoid intercell
interference
• 3GPP assumed that a cell should have 64 codes available for random access,
that the maximum cell radius supported is 120 km and that a reuse of 12
should be sufficient to avoid interference
– The 120 km lead to a symbol size of 800 µs, equivalent to a sub-carrier spacing of
1.25 kHz
– The number of subcarriers should be at least 64*12= 768, which would require 6
regular RBs, which could accommodate in theory 864 subcarriers
– 3GPP choose 839 subcarriers and consequently 838 ZC code shifts
– A cyclic prefix has to be added to the beginning of the RA symbol and a guard time
at the end of it to accommodate for the travel time to the UE
• 3GPP standardized the Random Access area as 6 Resource Blocks wide (in
frequency), with a duration of 1, 2 or 3 subframes
– 1,080 KHz by 1, 2 or 3 ms

4.1.1 Random Access Procedure
Part 1
Random Access

LTE Random Access Procedure
• An UE starts the access targeting an RX Receive Power Level
specified in SIB2 and if no reply is received it increases the level
by a step size specified in SIB2
– RX Power level: -120 to -90 dBm (designer dimensioned), with a
ramping step size of 0, 2, 4, 6 dB (designer dimensioned)
• The maximum number of UE access tries is specified in SIB2
– 3, 4, 5, 6, 7, 8, 10, 20, 50, 100, 200 (designer dimensioned)
• UE should expect a reply to its random access from the eNB in a
SIB2 specified window in subframes after the UE access
– Response window size in subframes: 2, 3, 4, 5, 6, 7, 8, 10
RACH Configuration in SIB 2 Range Step

Random Access Procedure
• Procedure Flow
1. UE Performs Random Access
2. UE Looks for eNB RAR message
3. UE Performs Contention Resolution
• Messages Sequence
UE reads SIB1and SIB2
UE reads the PRACH Configuration Index and
PRACH Frequency Offset to access the next frame
carrying PRACH
UE has to access the eNB due to:
Moving from RRC Idle to Connected
Request Uplink Resources
Complete and inter-system handover
UE selects from the cell Root Sequence Index a random Preamble sequence from Group
A or B based on Number of RA Preambles, Size of RA preamble Group A, Message Size
Group A, and Message Power Offset Group B
This Sequence is identified by RAPID (Random Access Preamble Identification)
UE selects the initial transmit power, based on Preamble Initial Received Power,
Reference Signal Power and Power Boost
UE transmits into the PRACH, considering zero Time Advance (as it was collocated with
eNB), using the calculated power to reach the eNB with the target power
UE increments the Number of Preamble Transmissions
Maximum Number of Preamble Transmissions
achieved?
UE looks for a PDCCH with CRC scrambled by RA-RNTI mapped to the PRACH
opportunity in which it transmitted
UE looks for this information 3 subframes after it transmitted for a length specified in
Random Access Window Size
Message Addressing Detected?
UE boosts power by
Power Ramping Step Size
Yes
No
No
Yes
UE decodes where eNB Random Access Response (RAR) message is in PDSCH
UE decodes RAR and looks for its RAPID in all RAR listed instances
RAPID Detected?
UE boosts power by
No
Yes
UE acquires from RAR message, Backoff Indicator, Timing Advance, Uplink Grant and
Temporary C-RNTI
UE transmits its initial layer 3 message four subframes later in PUSCH location assigned
in the Uplink Grant
If C-RNTI is not yet assigned, UE uses Temporary C-RNTI and sends message in CCCH
If C-RNTI is assigned, UE sends message in DCCH
UE starts a MAC Contention Resolution Timer
MAC contention Resolution Timer
expired?
No
Yes
UE detected Contention Resolution
MAC Control Element?
Yes
No
MAC Control Element matches layer 3 message sent?
Yes
No
PRACH Access
PDCCH
3 sub-frames
3 sub-frames
PDCCH with RA-RNTI and PDSCH with RAR and RAPID
RA Window
Size
RA Window
Size
Layer 3 message
Contention Resolution MAC Element
eNB UE
UE
Performs
Random
Access
UE
looks
for RAR
(Random
Access
Response
UE
Performs
Contention
Resolution
(CR)

• Parameters
– PRACH Configuration Index (0 to 63)
• Preamble Format (0 to 4)
– Cell Range
• Preamble Density (0.5 to 10 per frame)
– Traffic
• Preamble Version (up to 16 configurations per format)
– Subframe Numbers (1 to 5 subframes per frame)
– PRACH Frequency Offset
• Location in a subframe (0 to 94, adjacent to PUCCH)
– Zero Correlation Zone (0 to 15) or (0 to 6)
• Number of Root Sequences required per cell
– 1 shift ≈ cell range of 143 m
– High Speed Flag (≥200 km/h)
– Root Sequence Index
• Preambles Format 0 to 3: 838
• Preamble Format 4: 138
– Random Sequence Group
• Group A (4 to 60)
– Small Message Size or poor coverage
• Group B (4 to 64)
– Large Message Size and good coverage
• Non Contention Group
UE Performs Random Access
UE reads SIB1 and SIB2
carrying PRACH
achieved?
Yes
No
Zero Correlation Zone Configuration 0 to 15/ 0 to 6
PRACH Frequency Offset 0 to 94 RB

4.1.2 Physical Random Access
Channel (PRACH)
RACH
PRACH Format
Configuration Index
Frequency Offset
Zero Correlation Zone
High Speed Flag
Root Sequence Index

4.1.2.1 Random Access Channel
RACH

Random Access Channel (RACH)
• RACH is a transport channel used to transfer
Random Access Preamble Control information
between MAC and PHY
• RACH does not transfer any higher layer
messages
• PHY is responsible for:
– Calculate PRACH transmit power
– Select Preamble Sequence
– Transmit PRACH

PRACH Transmit Power
• SIB 2 parameters
𝑃𝑅𝐴𝐶𝐻 𝑃𝑟𝑒𝑎𝑚𝑏𝑙𝑒 𝑇𝑟𝑎𝑛𝑠𝑚𝑖𝑡 𝑃𝑜𝑤𝑒𝑟 = min(𝑃𝑐𝑚𝑎𝑥, 𝑃𝐿 + 𝑃𝑟𝑒𝑎𝑚𝑏𝑙𝑒 𝑅𝑋 𝑇𝑎𝑟𝑔𝑒𝑡 𝑃𝑜𝑤𝑒𝑟)
𝑃𝑟𝑒𝑎𝑚𝑏𝑙𝑒 𝑅𝑥 𝑇𝑎𝑟𝑔𝑒𝑡 𝑃𝑜𝑤𝑒𝑟
= 𝑃𝑟𝑒𝑎𝑚𝑏𝑙𝑒 𝐼𝑛𝑖𝑡𝑖𝑎𝑙 𝑅𝑒𝑐𝑒𝑖𝑣𝑒𝑑 𝑇𝑎𝑟𝑔𝑒𝑡 𝑃𝑜𝑤𝑒𝑟 + 𝐷𝑒𝑙𝑡𝑎 𝑃𝑟𝑒𝑎𝑚𝑏𝑙𝑒
+ 𝑃𝑟𝑒𝑎𝑚𝑏𝑙𝑒 𝑇𝑟𝑎𝑛𝑠𝑚𝑖𝑠𝑠𝑖𝑜𝑛 𝑐𝑜𝑢𝑛𝑡𝑒𝑟 − 1 ∗ 𝑃𝑜𝑤𝑒𝑟 𝑅𝑎𝑚𝑝𝑖𝑛𝑔 𝑆𝑡𝑒𝑝
• PL: Downlink Path Loss
• 𝑃 𝑐𝑚𝑎𝑥= UE maximum transmit power
• Delta Preamble= 0 dB for Preamble Format 0 and 1
• Delta Preamble= -3 dB for Preamble Format 2 and 3
• Power Calculation

• Preamble Format (PF)
• Root Sequence Index (RSI)
– RSI can be calculated after the following parameters are
defined:
• PRACH Configuration Index
• Zero Correlation Zone Value
• High Mobility Flag
– PRACH configuration index defines the number of sequences
required (from 836 or 138)
– Zero Correlation Zone Value defines the number of sequences
required by each cell
– High Mobility Flag defines if Doppler effect has to be taken
into account
• The planning tool should then allocate the required
number of sequences using logical sequence numbering
– The logical numbering can then be mapped according a table
in 3GPP TS 36.211
Physical Random Access Channel (PRACH)

4.1.2.2 Physical Random Access
Channel Format
PRACH Format

LTE Frame UL
• Allocation
– Green: Control
– Light Red: DL Quality 1
– Orange: ACK/NACK
– Red: DL Quality 2
– Blue: Random Access
– Light Blue: Not Used
– Orange: Assigned Subcarriers
Slot(0.5ms)
0
1
0
Sub-Frame(1ms)
2
3
1
4
5
2
6
7
3
8
9
4
1
0
1
1
5
1
2
1
3
6
1
4
1
5
7
1
6
1
7
8
1
8
1
9
9
Central Sub-carrier
12 sub-carriers
per 1 slot
Null Sub-carriers
1 OFDM
Symbol
PUCCH for SR
PUCCH for ACK/NACK
Demodulation RS
PRACH
Allocated RB
Non allocated RB
Sounding RS
ResourceBlock
12sub-carriers
per1slot
Resource Block
Slot(0.5ms)
0
1
0
Sub-Frame(1ms)
839 subcarriers
1.25 kHz
1 symbol
800μs
2
3
1
Central Sub-carrier
12 sub-carriers
per 1 slot
Null Sub-carriers
ResourceBlock
12sub-carriers
per1slot
1OFDMSymbol
slot
0
slot
1
subframe0
0.5ms
1ms
frame10ms
slot
2
slot
3
subframe1
slot
4
slot
5
subframe2
slot
6
slot
7
subframe0subframe3
slot
8
slot
9
subframe0subframe4
slot
10
slot
11
subframe0subframe5
slot
12
slot
13
subframe0subframe6
slot
14
slot
15
subframe0subframe7
slot
16
slot
17
subframe0subframe8
slot
18
slot
19
subframe0subframe9
Frequency
Time
PUCCH PUCCH
PUCCH for SR
PUCCH for ACK/NACK
Demodulation RS
PRACH
Allocated RB
Non allocated RB
Sounding RS
Resource Block
Cyclic Prefix
UE 1 UE 2 UE 3
Cyclic Prefix
Guard Time
slot0.5ms=15360Ts
2048Ts
160Ts144Ts

PRACH
Slot(0.5ms)
0
1
0
Sub-Frame(1ms)
839 subcarriers
1.25 kHz
1 symbol
800μs
2
3
1
Central Sub-carrier
12 sub-carriers
per 1 slot
Null Sub-carriers
ResourceBlock
12sub-carriers
per1slot
1OFDMSymbol
slot
0
slot
1
subframe0
0.5ms
1ms
frame10ms
slot
2
slot
3
subframe1
slot
4
slot
5
subframe2
slot
6
slot
7
subframe0subframe3
slot
8
slot
9
subframe0subframe4
slot
10
slot
11
subframe0subframe5
slot
12
slot
13
subframe0subframe6
slot
14
slot
15
subframe0subframe7
slot
16
slot
17
subframe0subframe8
slot
18
slot
19
subframe0subframe9
Frequency
Time
PUCCH PUCCH
PUCCH for SR
PUCCH for ACK/NACK
Demodulation RS
PRACH
Allocated RB
Non allocated RB
Sounding RS
Resource Block
Cyclic Prefix
UE 1 UE 2 UE 3
Cyclic Prefix
Guard Time
slot0.5ms=15360Ts
2048Ts
160Ts144Ts

Physical Random Access Channel (PRACH) 1
• PRACH is used to transfer random access
preambles to initiate network access
procedure
– PRACH does not transfer any RRC or
application data
– It is performed when:
• UE wakes up from sleep mode
• UE performs handoff
• UE losses uplink timing synchronization
• UE has to acquire network
synchronization and System Information
before trying to access the system
– Network defines frame and sub-frames
used for Random Access (RA)
• A bandwidth of 72 regular sub-carriers (six
RB) are reserved for RA
• One to three sub-frames are reserved for RA
• PRACH structure includes:
– A Cyclic Prefix
– A Preamble Sequence
– A Guard Time

Physical Random Access Channel (PRACH) 2
• PRACH is shared by several UEs, so orthogonal codes are used
to individualize them
– Regular 72 subcarriers do not allow for enough orthogonal codes
– An UE sends a preamble corresponding to a specific orthogonal
code
– Each cell supports 64 preamble sequences
• Sequences are divided in contention (2 groups) and non-contention
• Once a group is selected the UE chooses at random a preamble
• Four formats are specified based on turnaround distance
Preamble
Format
Application
Cyclic Prefix
Duration (μs)
Sequence
Duration (μs)
Guard Time
(μs)
Total Duration
(ms)
Maximum Cell
Range (km)
Subcarriers
Subcarrier
Bandwidth (kHz)
Symbol Duration
(μs)
0 FDD & TDD 103.12 800 96.88 1 14.5 839 1.25 800
1 FDD & TDD 684.38 800 515.62 2 77.3 839 1.25 800
2 FDD & TDD 203.12 1600 196.88 2 29.5 839 1.25 800
3 FDD & TDD 684.38 1600 715.62 3 102.7 839 1.25 800
4 TDD 14.58 133.33 9.38 0.157 1.4 139 7.5 133.33

PRACH Format
Cyclic Prefix
Preamble Sequence
Format 0 to 3
Guard Time
1, 2 or 3
Subframes
1.050 MHz
839 sub-carriers (1.25 KHz spacing)
1.080 MHz
Null
subcarriers
Cyclic Prefix
Preamble Sequence
Format 4
Guard Time
0.16
Subframes
1.050 MHz
139 sub-carriers (7.5 KHz spacing) Null
subcarriers
1.080 MHz
PRACH
Format
Duplex
RACH
sub-
carriers
Sub-
carrier
width
(kHz)
Total
width
(kHz)
Cell
sub-
carriers
RBs
PRACH
CP (μs)
PRACH
Symbols
Sequenc
e (us)
Guard
Time
(μs)
Total
duration
(μs)
Sub-
frames
Maximum
Cell
Range
(km)
Cell size
0 FDD & TDD 839 1.25 1,049 69.92 6 103.13 1 800 96.88 1000 1 14.5 medium cells
1 FDD & TDD 839 1.25 1,049 69.92 6 684.38 1 800 515.6 2000 2 77.3 very large cells
2 FDD & TDD 839 1.25 1,049 69.92 6 203.13 2 1600 196.8 2000 2 29.5 large cells
3 FDD & TDD 839 1.25 1,049 69.92 6 684.38 2 1600 715.6 3000 3 107.3
extra-large
cells
4 TDD 139 7.5 1,043 69.50 6 14.58 0.17 133.33 9.38 157 0.16 1.4 small cells

4.1.2.3 PRACH Configuration Index

• 3GPP designed the RA area to support simultaneous access to
several UEs, by providing orthogonal codes for the UE access
– Each UE chooses randomly one of the codes to perform its
access
– 3GPP specifies that 64 codes should be available for the UEs
in each access
– The 64 codes are assigned to three groups
• Contention Group A: to be used by UEs that have messages to be sent smaller
than a threshold specified in SIB2 or path loss larger than a value calculated
from parameters sent in SIB2
– 4 to 60 codes (designer dimensioned), with a step of 4
• Contention Group B:To be used by UEs that do not satisfy the conditions of
Group A
– 4 to 64 codes (designer dimensioned), with a step of 4
• Non Contention Group: This codes are assigned by eNB to UEs during
handover procedures, to avoid contention in this process
– Remaining codes, can be none

• Each cell has 64 Preamble Sequences and Network Designer can group them in
– Contention based Random Access Sequences
• Group A: Small message or large Path Loss
• Group B: Large messages and small path loss
– Non-contention based Random Access Sequences
• UE should select the appropriate group B if equations below are satisfied by applying the
parameters send in SIB 2, otherwise it should select Group A
– Group A Message Size Threshold
– Pmax
– Target Rx Power
– Preamble to Msg Delta
– Group B offset
• UE will use the Non Contention Group only under direction of eNB, mainly during
handover procedures
– This trims the access timing during handover procedures
– The network can be configured without the non-contention area
𝑀𝑒𝑠𝑠𝑎𝑔𝑒 𝑆𝑖𝑧𝑒 > 𝐺𝑟𝑜𝑢𝑝 𝐴 𝑀𝑒𝑠𝑠𝑎𝑔𝑒 𝑆𝑖𝑧𝑒 𝑇ℎ𝑟𝑒𝑠ℎ𝑜𝑙𝑑 𝐴𝑁𝐷
𝑃𝑎𝑡ℎ 𝐿𝑜𝑠𝑠 < 𝑃𝑚𝑎𝑥 − 𝑇𝑎𝑟𝑔𝑒𝑡 𝑅𝑥 𝑃𝑜𝑤𝑒𝑟 − 𝑃𝑟𝑒𝑎𝑚𝑏𝑙𝑒 𝑡𝑜 𝑀𝑠𝑔 𝐷𝑒𝑙𝑡𝑎 − 𝐺𝑟𝑜𝑢𝑝 𝐵 𝑂𝑓𝑓𝑠𝑒𝑡

• Random Access SIB 2 parameters are listed
below, with respective ranges
RACH Configuration Range Step
MAC Contention Resolution Timer 8, 16, 24, 32, 40, 48, 56, 64 subframes
Maximum HARQ Message Transmissions 1 to 8 1
PDSCH Configuration Range
Reference Signal Power -50 to -60 dBm
Power Boost (PB) 0 to 3
Zero Correlation Zone Configuration 0 to 15
PRACH frequency Offset 0 to 94 RB

PRACH Configuration Index (0 to 63)
PRACH Configuration Index
Configuration
Index
Preamble
Format
SFN Subframe number
RACH density per
frame
0 0 Even 1 0.5
1 0 Even 4 0.5
2 0 Even 7 0.5
3 0 Any 1 1
4 0 Any 4 1
5 0 Any 7 1
6 0 Any 1, 6 2
7 0 Any 2, 7 2
8 0 Any 3, 8 2
9 0 Any 1, 4, 7 3
10 0 Any 2, 5, 8 3
11 0 Any 3, 6, 9 3
12 0 Any 0, 2, 4, 6, 8 5
13 0 Any 1, 3, 5, 7, 9 5
14 0 Any 0 to 9 10
15 0 Even 9 0.5
16 1 Even 1 0.5
17 1 Even 4 0.5
18 1 Even 7 0.5
19 1 Any 1 1
20 1 Any 4 1
21 1 Any 7 1
22 1 Any 1, 6 2
23 1 Any 2, 7 2
24 1 Any 3, 8 2
25 1 Any 1, 4, 7 3
26 1 Any 2, 5, 8 3
27 1 Any 3, 6, 9 3
28 1 Any 0, 2, 4, 6, 8 5
29 1 Any 1, 3, 5, 7 4
30 - - -
31 1 Even 9 0.5
PRACH Configuration Index
Configuration
Index
Preamble
Format
SFN
Subframe
number
RACH density
per frame
32 2 Even 1 0.5
33 2 Even 4 0.5
34 2 Even 7 0.5
35 2 Any 1 1
36 2 Any 4 1
37 2 Any 7 1
38 2 Any 1, 6 2
39 2 Any 2, 7 2
40 2 Any 3, 8 2
41 2 Any 1, 4, 7 3
42 2 Any 2, 5, 8 3
43 2 Any 3, 6 2
44 2 Any 0, 2, 4, 6, 8 5
45 2 Any 1, 3, 5, 7 4
46 - - - -
47 2 Even 9 0.5
48 3 Even 1 0.5
49 3 Even 4 0.5
50 3 Even 7 0.5
51 3 Any 1 1
52 3 Any 4 1
53 3 Any 7 1
54 3 Any 1, 6 2
55 3 Any 2, 7 2
56 3 Any 3 1
57 3 Any 1, 4, 7 3
58 3 Any 2, 5 2
59 3 Any 3, 6, 2
60 - - - -
61 - - - -
62 - - - -
63 3 Even 9 0.5

4.1.2.4 PRACH Frequency Offset

PRACH Frequency Offset
• PRACH frequency offset specifies the first Resource Block to be used for the preambles
• This offset is applicable to all subframes
• FDD can only have one PRACH position per subframe
• TDD can have multiple PRACH positions per subframe

4.1.2.5 PRACH Zero Correlation Zone

Zero Correlation Zone• 3GPP specifies 838 root sequences (with 839 symbols each)
• Each cells has 64 preamble sequences, created by equally spaced shifts
– There are 838 cyclic shifts of a Root Sequence (1 shift ≈ cell range of 143 m)
– To generate 64 sequences the shift between sequences must be 13 sub-carrier symbols
– This corresponds to a cell size of 0.76 km
• Larger cell sizes require the use of more than one Root Sequence
• Zero Correlation Zone Index defines the relationship between the index, Number of
Sequences and Cell Range (shown in table below for preamble formats 0 to 3)
High Speed Flag= false
Preamble
sequences per
Root Sequence
Root Sequences
Required per Cell
Root Sequence
reuse pattern
Cell Range (km)
Index Cyclic shift
1 13 64 1 838 0.76
2 15 55 2 419 1.04
3 18 46 2 419 1.47
4 22 38 2 419 2.04
5 26 32 2 419 2.62
6 32 26 3 279 3.47
7 38 22 3 279 4.33
8 46 18 4 209 5.48
9 59 14 5 167 7.34
10 76 11 6 139 9.77
11 93 9 8 104 12.20
12 119 7 10 83 15.92
13 167 5 13 64 22.78
14 279 3 22 38 38.80
15 419 2 32 26 58.83
0 838 1 64 13 118.8

Format 4
Zero Correlation
zone cyclic shift
(High Speed
Flag= false)
Preamble
Sequences
per Root
Sequence
Root
Sequences
Required
per Cell
Root
Sequences
Reuse
Pattern
Cell
Range
(km)
Index
Actual
value
0 2 69 1 138 0.14
1 4 34 2 69 0.43
2 6 23 3 46 0.72
3 8 17 4 34 1.00
4 10 13 5 27 1.29
5 12 11 6 23 1.58
6 15 9 8 17 2.01
• Zero Correlation Zone Index is shown below for preamble format 4
• The high speed flag is set to false for this and the previous table
• High Speed Flag (HSF) is set to true for speeds exceeding 250 km/h
• When HSF is set to true the Doppler effect should be taken into
account and the Cyclic shifts varies with the root sequence

4.1.2.6 PRACH High Speed Flag

PRACH High Speed Flag
• High Speed flag is intended to notify that high
speeds can generate Doppler offset and impact
the preamble detection performance
• High speed train areas would require the setting
of this flag as on, when speeds pass 250 km/h
• In this case the Zero Correlation zone table is
modified to take into consideration the Doppler
shift

4.1.2.7 PRACH Root Sequence Index

Root Sequence Index
• Root Sequence Index is assigned considering:
– PRACH Configuration Index: defines the Preamble format
– High Mobility Flag: defines if Doppler should be taken
into account
– Zero Correlation Zone Value: defines the number of cell
sequences required, based on the cell range
• Network Planner should allocate the number of
Root Sequences required for each, following a
sequential numbering (logical numbering)
– Logical Root Sequence Allocations should space same
numbers as far apart as possible
– 3GPP specifies a lookup table that maps the logical
allocations to physical ones (see next slide)

Logical to Physical Root Sequence Mapping
• a
Logical root
sequence
number
Physical root sequence number u for formats 0 to 3
(in increasing order of the corresponding logical sequence number)
0–23 129, 710, 140, 699, 120, 719, 210, 629, 168, 671, 84, 755, 105, 734, 93, 746, 70, 769, 60, 779, 2, 837, 1, 838
24–29 56, 783, 112, 727, 148, 691
30–35 80, 759, 42, 797, 40, 799
36–41 35, 804, 73, 766, 146, 693
42–51 31, 808, 28, 811, 30, 809, 27, 812, 29, 810
52–63 24, 815, 48, 791, 68, 771, 74, 765, 178, 661, 136, 703
64–75 86, 753, 78, 761, 43, 796, 39, 800, 20, 819, 21, 818
76–89 95, 744, 202, 637, 190, 649, 181, 658, 137, 702, 125, 714, 151, 688
90–115 217, 622, 128, 711, 142, 697, 122, 717, 203, 636, 118, 721, 110, 729, 89, 750, 103, 736, 61, 778, 55, 784, 15, 824, 14, 825
116–135 12, 827, 23, 816, 34, 805, 37, 802, 46, 793, 207, 632, 179, 660, 145, 694, 130, 709, 223, 616
136–167 228, 611, 227, 612, 132, 707, 133, 706, 143, 696, 135, 704, 161, 678, 201, 638, 173, 666, 106, 733, 83, 756, 91, 748, 66, 773, 53, 786, 10, 829, 9, 830
168–203 7, 832, 8, 831, 16, 823, 47, 792, 64, 775, 57, 782, 104, 735, 101, 738, 108, 731, 208, 631, 184, 655, 197, 642, 191, 648, 121, 718, 141, 698, 149, 690, 216, 623, 218, 621
204–263
152, 687, 144, 695, 134, 705, 138, 701, 199, 640, 162, 677, 176, 663, 119, 720, 158, 681, 164, 675, 174, 665, 171, 668, 170, 669, 87, 752, 169, 670, 88, 751, 107, 732, 81, 758, 82, 757, 100, 739, 98, 741,
71, 768, 59, 780, 65, 774, 50, 789, 49, 790, 26, 813, 17, 822, 13, 826, 6, 833
264–327
5, 834, 33, 806, 51, 788, 75, 764, 99, 740, 96, 743, 97, 742, 166, 673, 172, 667, 175, 664, 187, 652, 163, 676, 185, 654, 200, 639, 114, 725, 189, 650, 115, 724, 194, 645, 195, 644, 192, 647, 182, 657,
157, 682, 156, 683, 211, 628, 154, 685, 123, 716, 139, 700, 212, 627, 153, 686, 213, 626, 215, 624, 150, 689
328–383
225, 614, 224, 615, 221, 618, 220, 619, 127, 712, 147, 692, 124, 715, 193, 646, 205, 634, 206, 633, 116, 723, 160, 679, 186, 653, 167, 672, 79, 760, 85, 754, 77, 762, 92, 747, 58, 781, 62, 777, 69, 770,
54, 785, 36, 803, 32, 807, 25, 814, 18, 821, 11, 828, 4, 835
384–455
3, 836, 19, 820, 22, 817, 41, 798, 38, 801, 44, 795, 52, 787, 45, 794, 63, 776, 67, 772, 72
767, 76, 763, 94, 745, 102, 737, 90, 749, 109, 730, 165, 674, 111, 728, 209, 630, 204, 635, 117, 722, 188, 651, 159, 680, 198, 641, 113, 726, 183, 656, 180, 659, 177, 662, 196, 643, 155, 684, 214, 625,
126, 713, 131, 708, 219, 620, 222, 617, 226, 613
456–513
230, 609, 232, 607, 262, 577, 252, 587, 418, 421, 416, 423, 413, 426, 411, 428, 376, 463, 395, 444, 283, 556, 285, 554, 379, 460, 390, 449, 363, 476, 384, 455, 388, 451, 386, 453, 361, 478, 387, 452,
360, 479, 310, 529, 354, 485, 328, 511, 315, 524, 337, 502, 349, 490, 335, 504, 324, 515
514–561
323, 516, 320, 519, 334, 505, 359, 480, 295, 544, 385, 454, 292, 547, 291, 548, 381, 458, 399, 440, 380, 459, 397, 442, 369, 470, 377, 462, 410, 429, 407, 432, 281, 558, 414, 425, 247, 592, 277, 562,
271, 568, 272, 567, 264, 575, 259, 580
562–629
237, 602, 239, 600, 244, 595, 243, 596, 275, 564, 278, 561, 250, 589, 246, 593, 417, 422, 248, 591, 394, 445, 393, 446, 370, 469, 365, 474, 300, 539, 299, 540, 364, 475, 362, 477, 298, 541, 312, 527,
313, 526, 314, 525, 353, 486, 352, 487, 343, 496, 327, 512, 350, 489, 326, 513, 319, 520, 332, 507, 333, 506, 348, 491, 347, 492, 322, 517
630–659 330, 509, 338, 501, 341, 498, 340, 499, 342, 497, 301, 538, 366, 473, 401, 438, 371, 468, 408, 431, 375, 464, 249, 590, 269, 570, 238, 601, 234, 605
660–707
257, 582, 273, 566, 255, 584, 254, 585, 245, 594, 251, 588, 412, 427, 372, 467, 282, 557, 403, 436, 396, 443, 392, 447, 391, 448, 382, 457, 389, 450, 294, 545, 297, 542, 311, 528, 344, 495, 345, 494,
318, 521, 331, 508, 325, 514, 321, 518
708–729 346, 493, 339, 500, 351, 488, 306, 533, 289, 550, 400, 439, 378, 461, 374, 465, 415, 424, 270, 569, 241, 598
730–751 231, 608, 260, 579, 268, 571, 276, 563, 409, 430, 398, 441, 290, 549, 304, 535, 308, 531, 358, 481, 316, 523
752–765 293, 546, 288, 551, 284, 555, 368, 471, 253, 586, 256, 583, 263, 576
766–777 242, 597, 274, 565, 402, 437, 383, 456, 357, 482, 329, 510
778–789 317, 522, 307, 532, 286, 553, 287, 552, 266, 573, 261, 578
790–795 236, 603, 303, 536, 356, 483
796–803 355, 484, 405, 434, 404, 435, 406, 433
804–809 235, 604, 267, 572, 302, 537
810–815 309, 530, 265, 574, 233, 606
816–819 367, 472, 296, 543
820–837 336, 503, 305, 534, 373, 466, 280, 559, 279, 560, 419, 420, 240, 599, 258, 581, 229, 610

Logical and Physical Allocation
of Root Sequence Numbers
• A Cell Range of 5 km requires
– Preamble Format 0
– Zero Correlation Zone 8
– 4 Root Sequences per cell
– Resulting in a reuse pattern of 209
8, 9, 10,
11
0, 1, 2, 3
4, ,5 ,6, 7
20, 21,
22, 23
12, 13,
14, 15
16, 17,
18, 19
32, 33,
34,35
24, 25,
26, 27
28, 29,30,
31
44, 45,
46, 47
36, 37,
38, 39
40, 41,
42, 43
168, 671,
84, 755
129, 710,
140,699
120, 719,
210, 629
2, 837, 1,
838
105, 734,
93, 746
70, 769,
60, 779
42, 797,
40, 799
56, 783,
112, 727
148, 691,
80, 759
28, 811,
30, 809
35, 804,
73, 766
146, 693,
31, 808
Logical Allocation of Root Sequence
Numbers
Physical Allocation of Root Sequence
Numbers

Part 2
Random Access Response

• Procedure Flow
carrying PRACH
achieved?
UE boosts power by
Yes
No
No
Yes
RAPID Detected?
UE boosts power by
No
Yes
Temporary C-RNTI
in the Uplink Grant
expired?
No
Yes
Yes
No
Yes
No
PRACH Access
PDCCH
3 sub-frames
3 sub-frames
RA Window
Size
RA Window
Size
Layer 3 message
eNB UE
UE
Performs
Random
Access
UE
looks
for RAR
(Random
Access
Response
UE
Performs
Contention
Resolution
(CR)

• Parameters
– Maximum Number
of Preamble
Transmissions
– Preamble Initial
Received Power
• Reference Signal
Power
• Power Boost
– Power Ramping
Step
UE boosts power by
No
Yes
RAPID Detected?
UE boosts power by
No
Yes
To re-
transmission
UE Looks for eNB RAR message

RAR Message
• eNB responds to Random Access in a specific Subframe
with a Random Access Response (RAR) message
– eNB responds to all detected accesses (up to 64) in the same
message
– Message location is specified in PDCCH using the RA-RNTI
• RA-RNTI range goes from 0001 to 003C (60 values)
– Temporary C-RNTI becomes C-RNTI if a successful contention
resolution is done
Backoff Indicator
(BI)
Backoff (ms)
0 0
1 10
2 20
3 30
4 40
5 60
6 80
7 120
8 160
9 240
10 320
11 480
12 960
13 reserved
14 reserved
15 reserved
E T R R BI
E T RAPID
R Timing Advance
Timing Advance Uplink Grant
Uplink Grant
Uplink Grant
Temporary C-RNTI
Temporary C-RNTI
E/T/R/R/BI subheader
E/T/RAPID subheader
(n instances)
Random Access
Response Payload
(n instances)
𝑅𝐴_𝑅𝑁𝑇𝐼 = 1 + 𝑡𝑖𝑑 + (10 ∗ 𝑓𝑖𝑑)
𝑡𝑖𝑑 = 𝑠𝑢𝑏𝑓𝑟𝑎𝑚𝑒 𝑃𝑅𝐴𝐶𝐻 𝑖𝑛𝑑𝑒𝑥
𝑓𝑖𝑑 = 𝑓𝑟𝑒𝑞𝑢𝑒𝑛𝑐𝑦 𝑃𝑅𝐴𝐶𝐻 𝑖𝑛𝑑𝑒𝑥
0 ≤ 𝑓𝑖𝑑 < 6

Part 3
Contention Resolution

• Procedure Flow
carrying PRACH
achieved?
UE boosts power by
Yes
No
No
Yes
RAPID Detected?
UE boosts power by
No
Yes
Temporary C-RNTI
in the Uplink Grant
expired?
No
Yes
Yes
No
Yes
No
PRACH Access
PDCCH
3 sub-frames
3 sub-frames
RA Window
Size
RA Window
Size
Layer 3 message
eNB UE
UE
Performs
Random
Access
UE
looks
for RAR
(Random
Access
Response
UE
Performs
Contention
Resolution
(CR)

• RAR Message
• Contention
Resolution
MAC Control
Element
• UE send its
Buffer status in
the MAC
message,
allowing eNB to
provide the
next Uplink
Grant
RAPID Detected?
UE boosts power by
No
Yes
Temporary C-RNTI
in the Uplink Grant
expired?
No
Yes
Yes
No
MAC Control Element matches
layer 3 message sent?
Yes
No
To
beginning
UE Performs Contention Resolution

UE Contention Resolution
Identity MAC control element
• Contention Resolution starts by the UE sending a layer 3 message
– CCCH and Temporary C-RNTI are used for RRC Connection Establishment or Re-Establishment
– DCCH and C-RNTI are used for RRC Connection Reconfiguration Complete (Intra-system handover)
• This stage verifies if multiple UEs used the same combination of RA-RNTI and preamble
sequence
• UE starts a contention resolution timer (send in SIB2), if timer expires the RA process
starts from beginning
• eNB replies to UE layer 3 message with a Contention Resolution Identity (CRI) MAC
control element, identified by LCID=11100
– eNB resends in the body of the message the layer 3 message sent originally by the UE
• If UE decodes in the message successfully its original message, the random access
procedure is successful and the Temporary C-RNTI becomes UEs C-RNTI
– C-RNTI range is from 003C to FFF3 (65,463 values)
R R E LCID (11100)
UE Contention Resolution Identity
MAC subheader (8 bit)
MAC Control Element (48 bit)

4.2 Uplink Control and Data
Channels
DMRS- Demodulation Reference Signals
PUCCH- Physical Uplink Control Channel
PUSCH- Physical Uplink Shared Channel
SRS- Sounding Reference Signal

SIB 2 Uplink Configuration Parameters
• System Information Block 2, broadcasted Random Access Parameters
– SIB 2 periodicity is scheduled in SIB 1 (8, 16, 32, 64,128, 256, 512 frames)
SIB 2 Information Elements for Uplink Range
PUSCH Configuration
Nsb 1 to 4
Hopping mode
inter-subframe,
intra and inter
sub-frame
Hopping offset 0 to 98
Enable 64 QAM true/false
Uplink Refence Signals
Group Hopping Enabled true/false
Group assignment 0 to 29
Frequency Hopping Enabled (true/ false) true/false
Cyclic Shift 0 to 7
PUCCH Configuration
Delta PUCCH Shift 1 to 3
NRB
2 CQI 0 to 98
NCS
1 0 to 7
NPUCCH
1 0 to 2047
Uplink Sounding Reference Signal
Configuration
Setup
SRS Bandwidth Configuration 0 to 7
SRS Subframe Configuration 0 to 15
ACK/NACK SRS Simultaneous
Transmissions
true/false
Max UpPTS (TDD) true/false

4.2.1 Demodulation Reference
Signals (DMRS)

Demodulation Reference Signal (DMRS)
• DMRS are used for
– Channel Estimation
– Synchronization
• DMRS are used by
– Physical Uplink Control Channel (PUCCH) and PUCCH DMRS
– Physical Uplink Shared Channel (PUSCH) Demodulation Reference Signal
– Sounding Reference Signal
• DMRS has 30 groups of Zadoff-Chu base sequences
– Each group has 25 sequences
• 5 base sequences ( 12, 24, 36, 48, 60) for 1 RB to 5 RB
• 10 pairs of sequences for 6 RB to 15 RB
• UE selects one of the 30 groups of base sequences
• UE selects the group length based on the number of resource blocks to be
transmitted
• For sequences larger than 60 (5 RB), UE selects one of the sequences in the
pair
• Group hopping can be enabled by the system
– 504 hopping patterns are used
• 17 group hopping patterns
• 30 sequence shift patterns
– Group hopping can be aligned to PCI planning

Uplink Base Group Sequence
• There are 30 groups of base sequences available for
PUCCH DMRS, PUSCH DMRS, SRS and PUCCH.
• Each group has 1 sequence available up to a length
of 5 and two sequences for each length afterwards
• Same groups should not be used in neighbor cells
and group allocation per cell should be done
• Groups can be use the PCI as a reference and assign
the group with mod (PCI, 30)
• The standard has provision for an additional
parameter used to assign PUSCH DMRS
– This parameter is called PUSCH Group Assignment, is
represented by 𝛥 𝑠𝑠 and is broadcast in SIB2
– The group assignment for PUSCH DMRS is then given
by:
• 𝑚𝑜𝑑(𝑚𝑜𝑑 𝑃𝐶𝐼, 30 + 𝛥 𝑠𝑠, 30)
• As an alternative to planning group hopping can be
used
– It is not such a good alternative, though as periodic
conflicts will still arise

Uplink Base Group Sequence

4.2.2 Physical Uplink Control Channel
PUCCH

PUCCH

Physical Uplink Control Channel (PUCCH)
• The Uplink Control information (UCI) is sent over PUCCH or PUSCH
– PUCCH is used before PUSCH establishment, after PUSCH is establishment UCI is
sent using this channel
– Release 10 allows for simultaneous transmission of PUCCH and PUSCH
• A single PUCCH occupies 2 RBs distributed across two time slots
• Each pair of Resource Blocks can be used simultaneously by multiple UEs
– Different cyclic shifts and different orthogonal spreading codes allows the eNB to
detect the transmission from multiple UEs sharing the same RBs
• PUCCH Resource Allocation
– Number of allocated PUCCH depends on the number of UEs
– PUCCH is allocated in pairs at the extreme edges of the eNB bandwidth
• Format 2, if existent gets the most extreme Resource Blocks, followed by Format 1
• When Format 3 is used the allocation of Resource Blocks has to be specified
• 2 to 8 RB can be allocated for PUCCH

• PUCCH transfers only control signalling (ACK/NACK,
CSI (Channel State Information), SR (Scheduling
Request)
• PUCCH occupies 1 RB on each extreme of a time slot
• There are 7 PUCCH DMRS formats
Slot(0.5ms)
0
1
0
Sub-Frame(1ms)
2
3
1
4
5
2
Central Sub-carrier
Cyclic Prefix- Extended
Null Sub-carriers
Resource Block
12 sub-carriersNull Sub-carriers
Resource Block
12 sub-carriers
1 OFDM Symbol
PUCCH for SR
PUCCH for ACK/NACK
REFERENCE SIGNAL
PRACH
Allocated RB (PUSCH)
Non allocated RB
PUCCH Normal CP Extended CP
Spreading
FactorFormat
Modulation
Scheme
Data Information
Bits per
subframe
Total RE DMRS RE PUCCH RE Total RE DMRS RE PUCCH RE
1 N/A
No data, just
channel presence
Scheduling Request (SR) 0 168 72 96 144 48 96 96
1a BPSK 1 BPSK symbol 1 ACK/NACK 1 168 72 96 144 48 96 96
1b QPSK 1 QPSK symbol 2 ACK/NACK 2 168 72 96 144 48 96 48
2 QPSK 10 QPSK symbols CQI/PMI 20 168 48 120 144 24 120 6
2a QPSK+BPSK
10 QPSK symbols +
1 BPSK symbol
CQI/PMI+1 ACK/NACK 21 168 48 120 144 24 120 5.7
2b QPSK+QPSK
10 QPSK symbols +
1 QPSK symbol
CQI/PMI+2 ACK/NACK 22 168 48 120 144 24 120 5.5
3 FDD QPSK 24 QPSK symbols
up to 10 x HARQ-ACK
up to 10 HARQ-ACK+SR
48 168 48 120 144 24 120 2.5
3 TDD QPSK 24 QPSK symbols
up to 20 x HARQ-ACK
up to 20 HARQ-ACK+SR
48 168 48 120 144 24 120 2.5
DM
RSDM
RS
1 slot
0.5 ms
12 sub-carriers
Resource Block
12 sub-carriers
Resource Block
1 slot
0.5 ms
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RSDM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
symbolsymbol
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
1 slot
0.5 ms
12 sub-carriers
Resource Block
12 sub-carriers
Resource Block
1 slot
0.5 ms
symbolsymbol
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
12 sub-carriers
Resource Block
1 slot
0.5 ms
symbol
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS

PUCCH Demodulation Reference Signal (DMRS)
• The Demodulation Reference Signal is given by the equation
• 𝑤 𝑚 ∗ 𝑧 𝑚 ∗ 𝑟𝑢,𝑣
∝ (𝑛)
– 𝑤 𝑚 : applicable to format 1, and equal to 3 for normal CP and 2 for
extended CP
• m: references the DMRS symbol within PUCCH and varies between 0 and 2
– 𝑧 𝑚 : equal to 1
– 𝑟𝑢,𝑣
∝ (𝑛): represents the Demodulation Reference Signal sequence
generated from the appropriate base sequence with a cyclic shift
• α: is the cyclic shift applied to the base sequence (there are 12 shifts available)
• u:is the base sequence Group Number (0 to 29)
• v: is the index of the sequence with the appropriate length (0 or 1)
• n: is the value of each subcarrier and varies from 0 to 11
• The Base Sequence Group Number is selected using the equation
• 𝑢 = 𝑓𝑔ℎ + 𝑓𝑠𝑠 𝑚𝑜𝑑30
– 𝑓𝑔ℎ: equal to 0 if group hopping is disabled (according to SIB 2) and equal
to a pseudo-random number between 0 and 29 if group hopping is enabled
• The pseudo-random number is a function of PCI
– 𝑓𝑠𝑠: equal to PCI mod 30

PUCCH DMRS
• PUCCH DMRS is selected from 30 base sequences for PUCCH formats 1a, 1b,1c
– The sequence is UE specific
• The cell specific cyclic shift (12 shifts available) is based on PCI (mod30) and helps to
differentiate between UEs sharing the PUCCH
• There are 12 available cyclic shifts and 3 orthogonal codes
• Format 2a, 2b
DM
RS
1 slot
0.5 ms
12 sub-carriers
Resource Block
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
symbol
Cell Specific
Base
Sequence
Cell Specific
Cyclic Shift
IFFT
wn(t)
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
Cell Specific
Base
Sequence
Cell Specific
Cyclic Shift
wn(t)
Cell Specific
Base
Sequence
Cell Specific
Cyclic Shift
wn(t)
IFFT
IFFT
1 slot
0.5 ms
12 sub-carriers
Resource Block
symbol
Cell Specific
Base
Sequence
Cell Specific
Cyclic Shift
IFFT
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
Cell Specific
Base
Sequence
Cell Specific
Cyclic Shift
z(m)
IFFT

• Format 1,1a,1b are used for Scheduling Request and 1 or 2 HARQ ACK
– A single Symbol d(0) is used to convey the information
• Format 1: no modulation (0 bit); Format 1a: BPSK (1 bit); Format 1b: QPSK (2 bit)
– A cell specific Base Sequence is selected based on PCI
• If group hopping is enabled the base sequence changes between time slots (no planning
required, but conflict exists)
• Group hopping randomizes intercell interference
– d(0) is multiplied by the Base Sequence
– A cyclic shift is applied to each symbol row
• The number of available cyclic shifts is signaled in the RRC message and is defined by Delta
PUCCH Shift
• Larger the number of cyclic shift used smaller is the cell range
– Time specific scrambling is applied (0° or 90 ° phase shift) to reduce inter code
interference
– An UE specific orthogonal code is applied, defined by a code index
– The number of multiplexing possibilities is shown below
Code Index w(0) w(0) w(0) w(0)
0 1 1 1 1
1 1 -1 1 -1
2 1 -1 -1 1
PUCCH delta shift Total Cyclic shifts Cell Range (km)
1 12 1.7
2 6 3.3
3 4 5.0
PUCCH delta
shift
Total Cyclic
shifts
Orthogonal
codes
Resultant
number of
codes
Multipath
delay (μs)
Multipath
distance (km)
1 12 3 36 5.6 1.7
2 6 3 18 11.1 3.3
3 4 3 12 16.7 5.0

• Formats 1,1a,1b
• Formats 2,2a,2b

• Format 2, 2a, 2b is used for Channel State Information (CSI)
report (20 to 22 bit)
– Channel Quality Indicator (CQI)
– Precoding Matrix Indicator (PMI)
– Precoding Type Indication (PTI)
– Rank Indication (RI)
• The HARQ bits are BPSK or QPSK coded and modulate the
DMRS signal
• The 20 CSI bits are scrambled by a sequence based on the cell
PCI and UE C-RNTI
• The 20 bits are then QPSK coded resulting in 10 symbols
• The 10 symbols are converted from serial to parallel and each
multiplied cell specific Base Sequence of length 12
– Group Base Sequence hopping can be applied
• Each sequence has a UE specific time domain cyclic shift
applied

• Formats 1,1a,1b
• Formats 2,2a,2b

• Format 3 was introduced in Release 10, to support additional HARQ ACK
requirements, besides the CSI information
– FDD can have 2 HARQ ACK per subframe and up to 5 subcarriers
– TDD PUCCH may have to acknowledge data sent over multiple downlink
subframes, so it was designed to support up to 40 HARQ (by doing an AND
of 20 HARQ)
• An SR can be also sent concatenated with the ACKs
• The 48 bits are scrambled with an UE specific sequence based on the
cell PCI and UE C-RNTI
• The sequence is then QPSK modulated resulting in 24 symbols
• The symbols are then split in two sets of 12
– Five duplicates are generated for each symbol and a phase shift is applied
to each duplicate based on PCI and the symbol row
– Each set of duplicates is multiplied by a different 5 bit orthogonal code
– The orthogonal codes are UE specific and up to 5 UEs can be multiplexed
on the same Resource Block
• Finally a set of time domain cyclic shifts is applied to the 10 sequences
– This cyclic shifts are a function of PCI and the symbol row they are applied

• Format 3

4.2.3 Physical Uplink Shared Channel
PUSCH

Uplink Channels
CCCH DCCH DTCH
UL-SCHRACH
PRACH PUSCH PUCCH
RAP SRS URS
Logical Channels
Transport Channels
Physical Channels
Physical Signals
• CCCH: Common Control Channel
• DCCH: Dedicated Control Channel
• DTCH: Dedicated Traffic Channel
• PRACH: Physical Random Access Channel
• PUCCH: Physical Uplink Control Channel
• PUSCH: Physical Uplink Shared Channel
• PUCCH: Physical Uplink Control Channel
• PUSCH: Physical Uplink Shared Channel
• RACH: Random Access Channel
• RAP: Random Access Preamble
• SRS: Sounding Reference Signal
• UL: Uplink
• URS: Uplink Reference Signal
Blue: Pre-defined scheduling
Orange: Defined by scheduler

Physical Uplink Shared Channel (PUSCH)
• PUSCH carries:
– RRC signalling messages (SRBs)
– Uplink Control Information (UCI)
– Application Data
• PUSCH uses QPSK, 16QAM, 64QAM if supported
by UE
– Modulation is indicated in DCI formats 0 to 4

PUSCH

Uplink Shared Channel (UL-SCH)
• UL-SCH is the transport
channel for:
– RRC (Radio Resource
Control)
– UCI (Uplink Control
Information) data
• Maximum code word size is
6144 bit
• A UL-SCH codeword has to
be transferred during a
single subframe (1 ms)

PUSCH DMRS
• R8 and R9 limit the transmission of PUSCH to a single antenna port
• The sequence choice is cell specific depends on
– Physical Cell Identity (PCI)
– Cell Specific Offset (ss) used if multi user MIMO is used, but only
guarantees orthogonality if the UEs transmit same number of RBs
• R 10 fixes the issue above and allows the transmission over up to 4
antenna ports
– Orthogonal Cover Code (OCC) is used to provide the additional
dimensions of differentiation
DM
RS DM
RS
1 slot
0.5 ms
12 sub-carriers
Resource Block
12 sub-carriers
Resource Block
1 slot
0.5 ms
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
symbol symbol

PUSCH DMRS
• R 8 and R9 PUSCH DMRS
• R 10 PUSCH DMRS (includes OCC-Orthogonal Cover Code)
DM
RS1 slot
0.5 ms
12 sub-carriers
Resource Block
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
symbol
Cell Specific
Base
Sequence
Cell Specific
Cyclic Shift
IFFT
DM
RS1 slot
0.5 ms
12 sub-carriers
Resource Block
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
DM
RS
symbol
Cell Specific
Base
Sequence
Cell Specific
Cyclic Shift
IFFT
wn(t)

4.2.4 Sounding Reference Signal
SRS

Sounding Reference Signal (SRS)
• SRS is used to:
– observe the channel quality over a bandwidth
section and use the information for scheduling and
link adaptation
– Uplink timing estimation
– Uplink power control
– Angle of Arrival (AoA) measurements for
beamforming
– SRS has an advantage over CSR as it does not suffer
interference from neighbor reference signals
• SRS bandwidth (# RB) is defined by:
– 7 Cell Specific SRS Bandwidth configurations
– Each configuration has 4 UE specific configurations
• SRS subframe configuration has:
– 15 subframe configurations varying from 1
allocation per frame to 10 allocations per frame
• SRS Configuration Index
– Defines SRS periodicity and frame offset
– Varies from 0 to 636 subframes
SRS Configuration
Index (Iss)
SRS Peridicity
(ms)
SRS Subframe
Offset
0 to 1 2 Iss
2 to 6 5 Iss-2
7 to 16 10 Iss-7
17 to 36 20 Iss-17
37 to 76 40 Iss-37
77 to 156 80 Iss-77
157 to 316 160 Iss-157
316 to 636 320 Iss-317
1 slot
0.5 ms
12 sub-carriers
Resource Block
SRS SRS SRS SRS SRS SRS
symbol
1 slot
0.5 ms
symbol
1 subframe
1 ms

5 Resource Optimization
Reuse
Resource Assignment Planning
ICIC

5.1 Reuse in LTE

Reuse in LTE
• Reuse in Cellular
– Load effect
– Probabilistic conflit
• Reuse in LTE
– Reuse 1
• Actual reuse
– Comparing reuse throughput
SNR SNR
Cell A Cell B
A B
Required SNR (dB)
QPSK 16QAM 64 QAM
Gaussian 2.5 8.2 12.1
Rayleigh 15.7 21.3 25

Reuse in LTE
• 3GPP designed LTE for a reuse of 1
– Reuse of 1 creates significant interference
– Interference has to be compensated by sending more
robust signals
• FEC detects and corrects signal errors
• 3GPP choose a base FEC with a coding rate of 1/3 (spectral
efficiency of 0.333) using a turbo encoder
• Additonal strength is added by retransmitting the signal several
times
• Equivalent signal repetition varies from 8.5 times to 1.1 time
• Repetition reduces capacity
– Traditional reuses divide the resources in groups and also
reduce capacity
• Which reuse will result in the highest throughput?

Reuse in LTE
• A theoretical experiment was set to find out
which reuse will result in the highest throughput
• A cluster of 19 cells was arrnged with the
following characteristics
– Cell radius of 0.85 km
– Tower height of 30 m
– Flat terrain
– No morphology
– Propagation slope
• 30 dB/decade

Downstream C/I for different reuses
Reuse 1 Reuse 3
Reuse 9 Reuse 12 Reuse 21

SNIR ocurrence per area
0
10
20
30
40
50
60
-5 0 5 10 15 20
Area
SNR (dB)
SNR occurrence for different reuses
Reuse1 Reuse3 Reuse9 Reuse12 Reuse21

SNIR ocurrence per
area*spectral efficiency/reuse
0
5
10
15
20
25
-5 0 5 10 15 20
Area*Spectralefficiency/Reuse
SNR (dB)

Cumulative SNIR ocurrence per
0
10
20
30
40
50
60
70
80
-5 0 5 10 15 20
CummulativeArea*SpectralEfficiency/Reuse
SNR (dB)

MCS ocurrence per area
0
5
10
15
20
25
30
35
40
45
50
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Area
MCS
MCS occurrence for different reuses

MCS ocurrence per
0
2
4
6
8
10
12
14
16
18
20
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Area*Spectralefficiency/Reuse
MCS
MCS occurrence for different reuses

Cumulative MCS ocurrence per
-10
0
10
20
30
40
50
60
70
80
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
CumulativeArea*SpectralEfficiency/Reuse
MCS
Cumulative MCS occurrence for different reuses

Observations
• Reuse 1 gave the highest throughput (19% above reuse 3)
• This assumes that repetition does increase the signal strength and that
the interference is uncorrelated
– The only mechanism to uncorrelate interference is fading
– Actual result for reuse 1 should be worst than predicted
• Morphology will add losses and reuse 1 area will drop
– Other reuses have a margin in the high MCSs
• Reuse 1 opeartes mainly in QPSK, all the other rueses operate mainly in
64QAM
• Traffic concentration in the center of the cell should favor the other
reuses
• The most efficient reuse should be reuse 3
Reuse
Modulation
1 3 9 12 21
QPSK 57% 7% 0% 0% 0%
16QAM 34% 29% 5% 2% 0%
64QAM 9% 65% 95% 98% 100%
Reuse 1 Reuse 3 Reuse 9 Reuse 12 Reuse 21
Average
Spectral
Efficiency
1.41 3.53 4.87 5.00 5.25
Average
Relative
Throughput
1.41 1.18 0.54 0.42 0.25

Average SNR according to reuse factor
• The equations to find the reuse from the target SNR are:
• For 20 dB/dec: 𝑥 =
𝑆𝑁𝑅
5.5026
3.18877551
𝑆𝑁𝑅
11.081
3.195909
𝑆𝑁𝑅
16.596
3.17864
y = 5.5026x0.3146
y = 11.081x0.3129
y = 16.596x0.3136
0
5
10
15
20
25
30
35
40
45
50
0 5 10 15 20 25
SNR(dB)
Reuse factor
Average SNR based on reuse factor (sector configuration)
20 dB/dec
40 dB/dec
60 dB/dec
Power (20 dB/dec)
Power (40 dB/dec)
Power (60 dB/dec)

5.2 Resource Assignment Planning

Resource Assignment Planning
• Resource Planning is still the sure way to maximize network
throughput
• It also allows for the analysis of issue, which is impossible to do
in a dynamically adjusted network
• The ideal Resource Planning unit is a Resource Block Group
(RBG), numbered across a whole frame
– This allows for optimum frequency and time domain allocation
• The resource scheduler can be one of three types:
– Start-stop: a block of RBGs is assigned to each cell; partial overlap is
allowed
– Start: an RBG start location is assigned, so the initial allocations do
not conflict between neighbor cells, but overlap may happen with
high traffic
– Random: cells choose their start point at random, avoiding planning;
it is not recommended as it will worst performance than the other
options

5.3 Small Cells and
Hetherogeneous Networks
Small Cells
HetNet

Small Cells and HetNet
• Growing number of subscribers and demand for bandwidth  macro base
stations can barely meet demand
• Introduction of Low Power Nodes (LPNs) = picocells, femtocells, and Relay
Nodes (RNs).
• Network starts with macro cells for coverage, then LPNs are added for capacity,
blind spots, and indoor coverage
• To expand LPN coverage – Cell Range Expansion (CRE)
– Typically UE served by cell with strongest SINR
– With LPNs this metric is not efficient; large disparity in transmit power between
macro (46 dBm), pico cells (30 dBm) and femto cells (23 dBm)
– CRE allows UEs to stay connect to cells with weaker power
– Thus LPNs share more network load

Small Cell
• What is a small cell?
– A micro cell
– A metro cell/
Distributed Antenna
System (DAS)
– A pico cell
– A repeater cell
• Transparent to eNB
– A relay cell
• A new cell backhauled
by eNB
– A Cloud RAN
– A femto cell
– A Home eNB
– A Wi-Fi hot spot
• What is a backhaul/ fronthaul?
– A fiber or wireless connection
from the cell towards the core
– Fiber is terrestrial, wireless is
aerial
– Wireless can connection can be
via:
• eNB (repeater and relay)
• Backhaul radio
– Backhaul radios use adaptive
modulation up to 1024QAM
• Up to 5 bit/s/Hz

Heterogeneous Networks
• Wireline and wireless networks backhaul is
becoming integrated by the use of IP
• Network users want seamless operation between
wireline and wireless, with same performance
• Traffic from all kinds of wireless cells has to be
combined with landline to reach private IP clouds
or the Internet
• Backhaul planning has to consider the availability
of fiber and complement it with wireless
backhaul, in what we call metro fiber solution

Heterogeneous Network
eNB
micro
e-UTRAN
Iu-PS Gn Gi
Go
UTRAN / CORE
MME S-GW P-GW
Home-GW
PCRFHSS
UTRAN 3G-SGSN 3G-GGSN PSTN
IMS
Internet
EVOLVED
PACKET
CORE (EPC)
eNB
Macro
UEUEUE
IP Cloud
Router
eNB
Macro
UEUEUE
CCC
S1-MME S1-U
S5/8
S3
S6a
Gr
S4 SGi
IP Cloud
eNB
pico
UEUEUE
UE UE
Repeater
Relay
UE UE
UE UE
eNB
Metro/
DAS
UEUEUE
X2
S1-U
S1-MME
X2
S1-U
S1-MME
S1-U S1-MME
Uu
Uu
Uu
Uu
UuUu
Uu
Uu
Uu
Uu
Uu
Uu
CCC
C-RAN
head
C-RAN
head
UE UE
UuUu
UE UE
UuUu
Home
eNB
WiFI
hot
spot
UEUEeNB
femto
UEUE
UEUE
WiFI
hot
spot
UEUE
Router
Uu
BACKHAUL
(Fiber or wireless)
WIRELESS PMP/
mobile
Router
SERVERS
PCs
Uu
FRONTHAUL
(Fiber or wireless)
· eNB: enhanced Node B
· MME: Mobility Management
Entity
· PCRF: Policy and Charging
Rules Function
· HSS: Home Subscriber Server
· DAS: Distributed Antenna
System
· S-GW: Serving Gateway
· P-GW: Packet Gateway
· C-RAN: Cloud Radio Access
Network or Centralized RAN
· CCC: Cloud Computing Center
PCs
SERVERS

Backhaul/ Fronthaul
• Backhaul interconnects RAN equipment to Core
• Fronthaul interconnects Remote Radio Units (RRU)to
centralized Base Band Units (BBU)
– Hoteling is the centralization of BBUs in a location (hotel)
– More reliability, easy maintenance
• Backhaul design has to encompass traffic coming from all
origins: wireline and wireless
• Backhaul design has to consider all types of backhaul: wireline
and wireless
• Backhaul traffic has to be dimensioned properly
– Large traffic can be consumed locally and do not reach the backhaul
– Typical macro cell should be designed for 100 Mbit/s
• Backhaul should consider availability and reliability
– Availability varies with the modulation and coding scheme used
– Reliability depends on many factors, like power and vandalism
• Wireless backhaul operators can provide efficient backhaul
sharing solutions

Heterogeneous Network
eNB
micro
e-UTRAN
Iu-PS Gn Gi
Go
UTRAN / CORE
MME S-GW P-GW
Home-GW
PCRFHSS
UTRAN 3G-SGSN 3G-GGSN PSTN
IMS
Internet
EVOLVED
PACKET
CORE (EPC)
eNB
Macro
UEUEUE
IP Cloud
Router
eNB
Macro
UEUEUE
CCC
S1-MME S1-U
S5/8
S3
S6a
Gr
S4 SGi
IP Cloud
eNB
pico
UEUEUE
UE UE
Repeater
Relay
UE UE
UE UE
eNB
Metro/
DAS
UEUEUE
X2
S1-U
S1-MME
X2
S1-U
S1-MME
S1-U S1-MME
Uu
Uu
Uu
Uu
UuUu
Uu
Uu
Uu
Uu
Uu
Uu
CCC
C-RAN
head
C-RAN
head
UE UE
UuUu
UE UE
UuUu
Home
eNB
WiFI
hot
spot
UEUEeNB
femto
UEUE
UEUE
WiFI
hot
spot
UEUE
Router
Uu
BACKHAUL
(Fiber or wireless)
WIRELESS PMP/
mobile
Router
SERVERS
PCs
Uu
FRONTHAUL
(Fiber or wireless)
· eNB: enhanced Node B
· MME: Mobility Management
Entity
· PCRF: Policy and Charging
Rules Function
· HSS: Home Subscriber Server
· DAS: Distributed Antenna
System
· S-GW: Serving Gateway
· P-GW: Packet Gateway
· C-RAN: Cloud Radio Access
Network or Centralized RAN
· CCC: Cloud Computing Center
PCs
SERVERS

5.4 Intercell Interference
Coordination (ICIC)

Inter Cell Interference Coordination
• LTE was designed with reuse of 1 as a basis
• Even so for lightly load cells, there should be a
mechanism to avoid conflicts between adjacent cells
• Trying to avoid resource planning, 3GPP conceived
the idea that cells could speak between themselves
and decide how to use the resources in the best
way, until conflict is unavoidable
• The implementation of this feature was left to the
vendors, but 3GPP made available some features
that could be used in the process

ICIC
• ICIC can be applied in frequency and time
domains
– In frequency domain some RBGs are prioritized
– In time domain some sub-frames are prioritized
• ICIC is seen as essential in deployments with
micro, pico and hetnets under a macro umbrella
– Those cells should use exclusive resources to avoid
interference from the more powerful macro cell

Features available for ICIC
• X2 interface that interconnects the eNBs
• X2 protocol messages
– Uplink Interference Overload Indication
• Reports uplink interference per Resource Block (high, medium,
low)
– Uplink High Interference Indication
• Informs other eNBs then RBs it plans to use
– Relative Narowband Transmit Power
• Informs other eNBs which RBs will be transmitted with high
power
– Almost Blank Subframe Information (ABS)
• Only Cell Reference Signals are transmitted in this frames, so
they can be used by cells under the umbrella of the macrocell
– Invoke Information
• Used to request the macrocell to use ABS

LTE Rel 8 ICIC
• 3GPP Release 8 LTE ICIC
– Inter-Cell Inference Coordination
– Optional implementation
– Purpose is to decrease interference between neighboring macro base
stations
– Implemented by lowering the power of part of the sub-channels in the
frequency domain which then can only be received close to the base
station
– ICIC can be static, semi-static, or dynamic
– Can use fractional frequency reuse, soft frequency reuse, or full frequency
reuse

LTE-A Rel 10 eICIC
• 3GPP Release 10 LTE-Advanced eICIC
– Enhanced Inter-Cell Inference Coordination
– Part of heterogeneous network (HetNet) approach - macro cells are complemented
with LPNs inside their coverage area
– Macro cells emit long range ,high power signals x LPNs emit low power signal over
short distances
– eICIC coordinates the blanking of subframes in the time domain in the macro cell to
mitigate interference between the macro and small cells in its coverage area (i.e.
macro cell transmits almost no data on these)
– When several pico cells are used in the coverage area of a single macro cell overall
system capacity is increased at the pico cells (as long as they do not overlap);
downside is that macro cell capacity is diminished
– Requires methods to quickly increase/decrease pico-exclusive subframes when
traffic patterns change
• ICIC is a macro cell interference mitigation scheme; eICIC is designed as part of
HetNet to reduce interference between macro and small cells

Almost Blank Sub-frames (ABS)
• Macro cell transmits:
– Common reference signals
– Sync signals
– Primary broadcast signal
• Macro does not transmit any user specific traffic (data or control)
• Within CRE area, legacy devices are served by the macro cell

Inter-Cell Load Balancing
• Load balancing is done in time domain through partitioning
• Macro and pico cells negotiate partitioning and apply ABS
• ABS increases spatial reuse
– Example in figure semi-static allocation (50% macros and 50% picos)

Adaptive Partitioning
• Traffic patterns change constantly in network
• Partitioning should be performed dynamically
• Certain ABS subframes can be “saved” for use on as needed basis
– Example in figure adaptive allocation (25% fixed for macros and 25% fixed
for pico; 50% adaptive subframes)

Features available for ICIC
• The implementation of ICIC was left up to the vendors, but 3GPP made
available some features that could be used in the process
• X2 interface that interconnects the eNBs
• X2 protocol messages
– Uplink Interference Overload Indication
• Reports uplink interference per Resource Block (high, medium, low)
– Uplink High Interference Indication
• Informs other eNBs then RBs it plans to use
– Relative Narowband Transmit Power
• Informs other eNBs which RBs will be transmitted with high power
– Almost Blank Subframe Information (ABS)
• Only Cell Reference Signals are transmitted in this frames, so they can be used by cells
under the umbrella of the macrocell
– Invoke Information
• Used to request the macrocell to use ABS
9/16/2014 Copyright CelPlan Technologies, Inc. 16-135

Frequency Domain Partitioning
9/16/2014 Copyright CelPlan Technologies, Inc. 16-136
• ABS is performed in Time Domain
• In Frequency Domain, macro and LPNs use separate frequencies
(carriers)
– Does not require synchronization
• Offers less granular resource allocation and lower flexibility
– does not partition subframes
– amount of LPNs does not change implementation
– partitioning ratio is limited by number of carriers
• When Carrier Aggregation is used:
– Macro cells transmit full power in one carrier, and lower power in second
carrier
– LPNs used second carrier as main carrier
Macro cell
LPNs

ICIC Considerations
• ICIC helps with cell-edge throughput but only at low to
moderate traffic load
– It does not increase cell capacity!
– Its gains are reduced with high load
• Dynamic ICIC (SON) ideally should be used to adapt to
the cell’s varying traffic patterns
• eICIC should be used in HetNet deployments

ICIC Considerations
• 3GPP is looking for alternatives to make the
network self adjusting
• This attempts are in very preliminary stages and
are far away from replacing traditional resource
planning
– The risk with ICIC deployment is depicted below

6. Summary

Summary
• Dimensioning and planning an LTE network is not
a trivial task
– There are tens of important parameters that have to
be properly dimensioned
• Overall throughput can be optimized by fine
tuning all the parameters
• Knowledge of traffic characteristics is very
important
• An advanced methodology and tool should be
used to achieve desired results

7. CelPlan New Products
CellSpectrum
CellDesigner

CellSpectrum
• A unique spectrum
scanner for LTE
channels
• Presents measurements
in 1D (dimension), 2D
and 3D at RE (Resource
Element) level
RF Channel Response
Received Signal level
Multipath

CellSpectrum
• Provides a unique
antenna correlation
analysis for MIMO
estimation and
adjustment
LTE frame port 0 LTE frame port 1
Drive Test Measurement interpolation

CelSpectrum™ Analyzer
• Range: 100 MHz to 18 GHz
• Bandwidth: 125 MHz (IBW: 100 MHz)
• Decimation: 1, 4, 8, 16, 32, 64, 128, 256, 512, 1024
• Resolution Bandwidth: 976.562 KHz, 488.281 KHz, 244.1141 KHz, 122.07 kHz, 61.035 kHz, 30.518 kHz,
15.259 kHz, 7.62939 kHz, 3.815 kHz
• Display: Max hold, Min hold, Write, Blank
• Capture modes:
– Sweep and Block

CellDesigner
A new Generation of Planning Tools
A collaborative work with operators
Your input is valuable

CellDesigner
• CellDesigner is the new generation of Planning and
Optimization tools
• Wireless networks became so complex that it
requires a new generation of tools, capable of:
– Documenting the physical deployments
– Documenting network parameters for each technology
– Flexible data traffic modelling (new services, new UE
types)
– Traffic allocation to different technologies
– Fractional Resouce Planning
– Performance evaluation
– Integrated backhaul

All information contained in this document is property of CelPlan Technologies. Unauthorized copies are prohibited.
CellDesigner™
Simultaneous Multi-Technology Support
• Supports all wireless technology
standards:
– LTE–A (TDD and FDD), WiMAX, WI-FI,
WCDMA (UMTS), HSPA, HSPA+, IS2000
(1xRTT, EVDO), GSM (including Frequency
Hoping), GPRS, EDGE, EDGE-E, CDMA One,
PMR/LMR (Tetra and P25), MMDS/LMDS,
DVB-T/H, and Wireless Backhaul
• Full network representation
– Site, Tower, Antenna Housing, Antenna
System, Sector, Cell, Radio
– Full network parameter integration
– KPI integration
• Full implementation of the Korowajczuk
3D model, capable of performing
simultaneously outdoor and indoor
multi-floor predictions
• Multi-technology dynamic traffic
simulation

CellDesigner™
Automatic Resource Planning (ARP)
• Enables the dramatic increase of network capacity
and performance
• Handover, Frequency and Code Optimization
• Automatically and efficiently optimizes handoff
thresholds, neighbor lists, and frequency plans
• Patent-pending methodology capable of significantly
increasing cell capacity (SON & ICIC)
Automatic Cell Planning (ACP)
• Footprint and interference enhancement
• Allows optimization of radiated power, antenna type,
tilt, azimuth, and height
Performance Predictions
• Overall performance prediction per service class
(bearer)
9/16/2014

CellDesigner™
9/16/2014
Google Earth Integration
• Capable of presenting predictions and
measurements live in Google Earth’s 3D
environment
Network Master Plan (NMP)
• Patent-pending methodology that
simplifies SON and ICIC
Integration of Field Measurement Data
• Collection of data from virtually any type of
measurement equipment and any format
• Automatic extraction of propagation
parameters
Integration of KPIs
• Comparison reports between reported and
calculated KPIS

All information contained in this document is property of CelPlan Technologies. Unauthorized copies are prohibited.9/16/2014
CellDesigner™
GIS Database Editor
• Allows the editing and processing of
geographical databases
Backhaul Planning
• Calculates network interconnections,
interference analysis & reporting for point-to-
point, microwave transmission links
• Can display obstruction in Fresnel zones as well
as the path loss
• Calculates attenuation caused by diffraction.
• Calculates rain attenuation for each link
• Provides link performance and compares
against the requirements established by ITU-R

Thank You!
Questions?
Leonhard Korowajczuk
webinar@celplan.com
www.celplan.com

What LTE Parameters need to be Dimensioned and Optimized

More Related Content

What's hot (20)

Similar to What LTE Parameters need to be Dimensioned and Optimized (20)

Recently uploaded (20)

What LTE Parameters need to be Dimensioned and Optimized