Como usar Order Specific Files

Relion® Protection and Control

Relion® 650 and 670 series instructions
How to use order specific files in
PCM600 2.x

How to use order specific files in PCM600 2.x March 24, 2010
Instructions 1MRG000522
Rev. B

1. Introduction
This document is designed to instruct the users on how to use the IED order specific
files (more popular known as “option files”), more exactly – how to install them during
the new IED insertion and the Configuration Wizard process or later on with the
License Update Tool.

IED insertion if you work offline, follow the steps described in Chapter 2:
- If you don’t have access to the IED.

IED insertion if you work online, follow the steps described in Chapter 3:
- If you have access to the IED.

How to run License Update Tool, follow the steps described in Chapter 4:
- If you already started engineering.

2. If you don’t have access to the IED
These steps assume that you have access to the order specific files (e.g.
213314930.zip, i.e. ordernumber.zip)

Step 1
Unzip the file to extract the file “Orderoptions 213314930.xml“from it.

Step 2
Start PCM600 and insert your IED, the IED Configuration Wizard will then start.
Select the Offline option and click Next.

Figure 1

Rev. B

Step 3
Select communication protocol and click Next.

Figure 2

Step 4
Enter the IP address for your IED and click Next.

Figure 3

Rev. B

Step 5
Select the IED version and click Next.

Figure 4

Step 6
Select Browse and navigate to the directory containing the previously unzipped xml
file. Select the xml file, click Open and Next (Fig. 6 and Fig. 7).

Figure 5

Rev. B

Figure 6

Figure 7

Rev. B

Step 7
Confirm the housing options, by clicking Next.

Figure 8

Step 8
Click Finish on the last Configuration Wizard screen, to complete the IED insertion
process.

Figure 9

You are ready now to use the inserted IED in PCM.

Rev. B

3. If you have access to the IED
Start PCM600 and insert your IED, the IED Configuration Wizard will then start.
Select the Online option and click Next.

Figure 10

Perform step 3 and 4 described in chapter 2 and then perform a scan on the IED that
you are connected to by clicking Scan and Next.

Figure 11

Perform step 7 and 8 described in chapter 2, to complete the online installation. The
order options will be loaded from the IED.

You are ready now to use the inserted IED in PCM.

Rev. B

4. If you already started engineering
For offline license update these steps assume that you have access to the order
specific files (e.g. 213314930.zip, i.e. ordernumber.zip)

Step 1
For offline license update unzip the file to extract the file “Orderoptions
213314930.xml“from it.

Step 2
Start License Update Tool by right clicking the IED and select “License Update Tool”.

Figure 12

Step 3
Select Yes or No to make a backup or not. It’s recommended to make a backup.

Figure 13

Rev. B

Step 4
Select Online or Offline and click next.
For Offline follow step 5, 6 and 8.
For Online follow step 7 and 8.

Figure 14

Step 5
Select Browse and navigate to the directory containing the previously unzipped xml
file. Select the xml file, click Open and Next.

Figure 15

Rev. B

Step 6
Click Finish on the last License Update Wizard screen, to complete the IED license
update process.

Figure 16

Step 7
Click Finish on the last License Update Wizard screen, to complete the IED license
update process.

Figure 17

Rev. B

Step 8
After completion a migration report is presented, showing deleted functionality.

Figure 18

Deleted blocks are marked blue in Application Configuration Tool.

Figure 19

If there are any deleted function blocks, you need to check the configuration and
make sure that all variables related to that function block are deleted as well and this
will not impact the configuration.

After this, you are ready now to continue using the IED in PCM.

5. Limitation
If the order option in the IED is updated and a read command is executed, operation
will fail. Hence the order option and the configuration will not match in the IED. To
avoid this situation it is recommended that always execute a write operation from
PCM with the new order options in order to synchronize the configuration and order
options both in IED and PCM.

Rev. B

ABB AB
Substation Automation Products
SE-721 59 Västerås
Sweden
Telephone: +46 (0) 21 34 20 00
Facsimile: +46 (0) 21 14 69 18
www.abb.com/substationautomation

Como usar Order Specific Files

More Related Content

What's hot (9)

Viewers also liked (9)

Similar to Como usar Order Specific Files (17)

More from faqrelion (6)

Como usar Order Specific Files