GarrettCom 10KT Substation Switch Now Available
- 1. Magnum 10KT Magnum Configurable Managed Switch with Timing Features • Next Generation 36 port industrial switch with configurability and reli- ability • Dual hot-swappable power supplies in a 1.5U rack-mount package • Precision timing, full IEEE The Magnum™ 10KT Switch provides rack-mount space efficiency and advanced 1588v2 implementation port configurability for heavy duty industrial applications where maximum fiber port count and diversity are required. New advanced thermal design techniques • Energy-efficient thermal (patent pending) enable the 10KT to deliver high reliability and configurability design for maximum reli- even at extended operating temperatures. Special rack-mount cooling features ability include Thermal Fins for extra heat dissipation and internal heat transfer techniques that use the case as a heat sink. Cooler operation of internal electronic components • Substation-Hardened, IEC leads to longer life-time and increased reliability. 61850-3 compliant Next Generation industrial switch features, especially for power utility facilities in the Smart Grid, importantly include high precision IEEE 1588v2 timing synchronization with precision as low as single-digit nanoseconds. The Magnum 10KT provides a new advanced level of 1588v2 timing features and accuracy, using integrated hardware and software. Advanced timing is supported on 100Mb and Gb ports, and is configurable on both fiber and copper port types. The Magnum 10KT also offers configurable Dual Hot-Swappable power supplies for redundancy and increased reliability. Both high voltage AC/DC and low voltage DC hot-swappable power supplies are configurable in the Magnum 10KT. Different power supply types may be selected for each of the two hot- swappable slots. Software monitors each power supply, and can signal when a power supply module swap is needed. The swap-out can readily be done while the 10KT Switch continues in operation. The ten port configuration slots in the Magnum 10KT provide the flexibility for network designers to configure up to four fiber or copper Gb ports and up to thirty-two 100 Mb SFF fiber or copper ports. Copper ports can optionally be Power-Sourcing PoE. Modules may be configured for regular port types, IEEE 1588 v2 timing, or combinations. Magnum 10KT Managed Switches come with field-proven MNS-6K and MNS-6K-SECURE Management Software. MNS-6K features include LAN software support including SNMP management, IPv6, Secure Web Management, IGMP, graphical user interface (GUI), redundant LANs support, and many network management security and ease-of-use features. Magnum 10KT Managed Switches have rugged metal cases for regular or “Reverse” rack-mounting, and auto-ranging power supplies for operation with standard AC power worldwide, or internal DC power supply choices. Moisture- and corrosion-protecting Conformal Coating is optional. The Magnum 10KTs and all other Magnum products are designed and manufactured in the USA and have a three year warranty.
- 2. Specifications “Next Generation” Configurable Managed Switch PERFORMANCE: Fiber Ports, 100 Mb (multi-mode and sgl-mode): Configurable in modules. Power Consumption: 55watts when fully loaded with 4 Gb ports, 16 Regular ST or SC at 4/module, or SFF (Small Form Factor) for high fiber port 100Mb fiber and 16 10/100 copper. density, 8 per module. Each FDX or HDX, default is FDX mode AC: IEC-type, male recessed Gigabit Ports, 1000 Mb: Configurable, std. See selection of modules. Power Input, AC: 100 to 240 VAC, 47 to 63 Hz (auto ranging) RJ-45 Ports: 100 or 10 Mb speed, full- or half-duplex mode, per port, Power Consumption: 30 watts typical with 32 fully-loaded copper ports individually determined.10/100 auto-negotiating & auto-cross, 32 ports max. 60 watts typical with 32 fully-loaded fiber ports All Ports non-blocking: Processing type: Store and Forward with IEEE 802.3x full-duplex flow control DC DUAL POWER SOURCE (OPTIONAL) System aggregate forward and filter rate: 11.9Mpps When non-Hot-Swappable power supplies are ordered, the Magnum Address table: 8K nodes, self-learning, with address aging 10KT may be ordered with optional Dual DC power input, for continuity Packet buffers: 512KB for 10 and 100Mb, 128KB for Gb of operation when either one of the DC input sources is interrupted. Latency: 6μs + packet time max (TX - TX, TX - FX, FX - FX, TX-G, G-G) Available for -48VDC and 24VDC. NETWORK STANDARDS: MECHANICAL: IEEE 802.3z, 802.3ab, 802.1p: 100BASE-TX, -FX, 1000BASE-SX, -LX Enclosure: Rugged high-strength sheet metal. 1.5U rack-mounting or Auto-negotiation and auto-crossover on TP, IEEE 802.3u stand-alone. IEEE 1588v2 Compliant Rack-mounting brackets: 19" included; ETSI and 23" Telco optional. IPv6 Compliant Cooling Method: free convection, special (patent pending) thermal See MNS-6K and MNS-6K-SECURE datasheets for software, network security, techniques redundant LANs management, GUI and other software features. Dimensions: 2.63nH (with thermal fins) x17.5inWx12.1inD (4.3cmHx 44.5cmW x 30.7cmD) OPERATING ENVIRONMENT: Weight: rack-mount 14.2 lbs. (6.5 kg) IEC 60068 Operating temp. per “Type Test” -40° to 185°F (-40° to 85°C) UL 60950 “Component Parts” temperature rating: 140°F (60°C) LED INDICATORS, 100 Mb FIBER PORTS: Storage: -40° to 185°F (-40°to 85°C), L/A: Steady on when fiber link is operational...blinking for data traffic Ambient relative humidity: 5% to 95% (non-condensing) F/H: ON = full-duplex mode, OFF = half-duplex mode Altitude: -200 to 13000ft (-60 to 4000m) Conformal coating (humidity protection) option: Request quote LED INDICATORS PER RJ-45 PORT: L/A: Steady on when fiber link is operational...blinking for data traffic RELAY CONTACTS FOR ALARMS (OPTIONAL): F/H: ON = full-duplex mode, OFF = half-duplex mode Form C, one NC indicating internal power, one NC software controllable. AGENCY APPROVALS AND STANDARDS COMPLIANCE: NETWORK CABLE CONNECTORS: UL Listed (UL 60950), cUL, CE, Emissions meet FCC Part 15, Class A 1000 Mb ports: standard SFPs and GBICs supported, see modules description IEC61850-3 EMC and Operating Conditions Class C for Power 100 Mb Fiber ports connector options: multi-mode FX-MTRJ, LC, ST, SC; Substations IEEE 1613 Class 2 Environmental Std for Electric Power Substations sgl-mode 20km LC, SC and ST, and 50km “long reach” sgl-mode LC, SC. NEMA TS-2 for Traffic Control 100 Mb Copper: Category 5 UTP/STP; 10 Mb: Cat. 3,4, 5 UTP/STP HOT SWAPPABLE POWER SUPPLY OPTIONS WARRANTY: Magnum 10KT may be ordered with hot swappable power supplies. Three years Made in USA Up to two of the following supplies may be chosen: ©2011 GarrettCom, Inc. Printed in United States of America Doc No. 10KT 01/11 GarrettCom, Inc. reserves the right to change specifications, performance characteristics and/or High (H) nominal: Input 90 to 250V AC/DC model offerings without notice. GarrettCom is a registered trademark of GarrettCom Inc. -48VDC: Input 36 to 60VDC Magnum, Dymec, DynaStar, S-Ring, and Link-Loss-Learn are trademarks of GarrettCom, Inc. 24VDC: Input 18 to 36VDC NEBS is a registered trademark of Telcordia Technologies. UL is a registered trademark of Underwriters Labs. (Std. Terminal Block: “-, GND, +”, Magnum 10KT-HSP-TF Magnum 10KT Fiber-configurable Convection-cooled Managed Switch, base unit. Provides 10 modular slots for configuration flexibility of up to 4 Gb ports and 32 copper or fiber ports. Includes 2 slots for Hot- Swap Power Supplies; Case with thermal fins. Magnum 10KTR-HSP-TF “Reverse” model, same as Model 10KT except user ports and the power input connectors are in the rear. Two sets of LEDs (both rear and front) provide duplicate status data for viewing from either side. Magnum 10KT-H-TF Front mount with AC/DC power (90-250V); Case with thermal fins Magnum 10KTR-H-TF Reverse mount with AC/DC power (90-250V); Case with thermal fins Magnum 10KT-48VDC-TF Front mount with -48V DC Power; Case with thermal fins Magnum 10KTR-48VDC-TF Reverse mount with -48V DC Power; Case with thermal fins Magnum 10KT-24VDC-TF Front mount with 24V DC Power; Case with thermal fins Magnum 10KTR-24VDC-TF Reverse mount with 24V DC Power; Case with thermal fins Magnum 10KT-AC-TF Front mount with AC Power; Case with thermal fins Magnum 10KTR-AC-TF Reverse mount with AC Power; Case with thermal fins Configuration Options: Magnum 10KT base unit has ten port module slots, each of which may be configured with a module from below, max of 4Gb and 32 100Mb fiber or 10/100 copper (or Power Sourcing PoE) ports: 10K4-RJ45 Module w/four 10/100 RJ-45 ports 10K4T-RJ45 Module w/four 10/100 RJ-45 ports with 1588 timing 10K4P-RJ45 Module w/four 10/100 PoE Power Source RJ-45 ports 10K4-MLC Module w/four 100Mb multi-mode fiber LC ports 10K4T-MLC Module w/four 100Mb multi-mode fiber LC ports with 1588 timing 10K4-SLCModule w/four 100Mb single-mode fiber LC ports (20km) 10K4T-SLC Module w/four 100Mb single-mode fiber LC ports (20km) with 1588 timing 10K4-SLCL Module w/four 100Mb “long-haul” single-mode fiber LC ports (40km) 10K4T-SLCL Module w/four 100Mb “long-haul” single-mode fiber LC ports (40km) with 1588 timing GarrettCom, Inc. 10K4-MTRJ Module w/four 100Mb multi-mode fiber MTRJ ports 47823 Westinghouse Drive 10K4T-MTRJ Module w/four 100Mb multi-mode fiber MTRJ ports with 1588 timing Fremont, CA 94539 10K2-MST Module w/two multi-mode ST fiber ports PH: (510) 438-9071 10K4-MSC Module w/two multi-mode SC fiber ports FAX: (510) 438-9072 10K4-SSC Module w/two single-mode SC fiber ports Email: mktg@garrettcom.com 10K4-SSCL Module w/two “long-haul” single-mode SC fiber ports Web: www.GarrettCom.com 10K2T-2GCU Module with two-Gigabit RJ-45 ports, 1588 timing 10K2T-2GSFP Module with two Gigabit SFP slots, 1588 timing