Ftp server configuration on cisco packet tracer
0 likes1,619 views
This document provides instructions for configuring an FTP server on Cisco Packet Tracer, including building a network topology with a PC and server, assigning IP addresses, using an FTP client on the PC to upload a file to the FTP server, and verifying the file was received on the server. The tutorial explains how to set up the network infrastructure, transfer a file from the laptop to the server using FTP, and check the server's FTP directory to confirm the file was successfully received.
Ftp server configuration on cisco packet tracer
- 1. Mamun Prodhan ID: 182482553 Department of CSE City University Bangladesh Topic: Configuration of ftp server on cisco packet tracer In this tutorial we will learn how to configure an email server in cisco packet tracer As you can see on the picture bellow , we have 1 pc and 1 server’s. 1. Build the network topology: 2. Configure IP addresses on the PC ,FTP Server: Laptop: IP address: 192.168.1.1 Subnet Mask: 255.255.255.0 Server: IP address: 192.168.1.2 Subnet Mask: 255.255.255.0
- 2. 3. Now try using an FTP client built in the Laptop to send files to an FTP server configured in the Server.
- 3. 4. Create a file in the Laptop then upload it to the server using FTP.
- 4. 6 . Once file upload is successful, go to the Server FTP directory to verify if the file sent has been received .
- 5. To check other FTP commands: To see this working, let’s open an HTTP directory and upload(put) a file to it using FTP: