02 b pcam dcva specification sheet
0 likes305 views
The MotionViewer DCVA camera is a battery-operated, wireless, indoor, motion-activated video camera designed for security systems. It features a CMOS sensor, 85 degree lens, infrared night vision up to 14 feet, motion detection up to 40 feet, and encrypted wireless transmission. When motion is detected, it captures and transmits a 10 second video to the monitoring station. It has a battery life of up to 4 years and dual tamper detection.
02 b pcam dcva specification sheet
- 1. MotionViewerTM camera DCVA P R O D U C T S P E C I F I C A T I O N S S H E E T Made by RSI VIDEO TECHNOLOGIES 2202b May 2009 Description Features The MotionViewer TM camera DCVA Pet-Immune, is > S2View® - Spread Spectrum, VIDEOFIED®, Interactive, a battery operated, wireless indoor motion-activated video AES Encrypted Wireless technology provides optimum camera designed for use in VIDEOFIED® security systems. signal integrity and security. Motion-activated cameras are intended for applications where > Camera - CMOS black and white sensor with 85° wide angle video verification of intrusion alarms is necessary or desired. lens and video resolution of 320 x 240 pixels. The DCVA consists of a digital camera, a passive > Night illumination - up to 4.5 m/14 ft. distance using two infrared motion detector, and S2VIEW® spread spectrum, infrared LED. VIDEOFIED® interactive, encrypted wireless circuitry for secure two-way communications with the control panel. The camera > Motion detector - dual-element, passive infrared with fresnel consists of a CMOS black and white sensor and an 85°, wide lens for 12 m/40 ft. wide, 90° coverage pattern. angle lens. Two infrared LED provide a night illumination > Camera begins filming in under 100 milliseconds after distance of approximately 4.5 meters/14 feet. For motion the PIR detects motion. or movement detection, a fresnel lens inside the cover captures a 12 m/40-ft wide, 90° angle passive infrared pattern. > Supervised - transmits a check-in/status signal every The base allows for flat wall or corner mounting. A 8 minutes indicating unique identification code along with dual tamper function provides for both wall and cover the current alarm state, tamper condition, serial tamper detection. number, manufacture date, software revision, and battery status. Pet-immunity allows the camera to be installed in an area where pets weighing up to 18 kg/40 lbs. may be present. > Dual tamper - provides cover and wall tamper detection. The camera is typically installed to cover entire rooms, hallways, > Lithium batteries - up to four years. and other similar areas where broad viewing/ detection Applications coverage is needed. When the alarm system is armed and the motion detector senses motion or movement, the detector > Video verification of intrusion alarms. transmits a signal and activates the camera, which captures a 10-second digital video segment. The control panel receives the signal and responds according to system configuration/programming. The alarm and video segment are reported via the control panel to the central monitoring station, and can also be sent to Email addresses for viewing. The detector is powered by three lithium batteries that can last up to four years, depending on the amount of detector activity. The detector transmits a check-in signal every eight minutes that includes its unique identification code along with the current detection sensor state, tamper condition, serial number, date of manufacture, software revision, and battery status. DCVA means DCVA600 for USA/Canada, DCVA700 for Australia/ www.videofied.com Singapore and DCVA200 for Europe and rest of the world.
- 2. MotionViewerTM DCVA TECHNICAL SPECIFICATIO NS Electrical Data Physical Data Power requirements Three 3.6 V batteries Material ABS—ULV0 Battery type Lithium, LS14500 Dimensions 89 mm x 70 mm x 70 mm Battery life Up to 4 years (LxWxD): 3-1/2 in. x 2-3/4 in. x 2-3/4 in. RF technology S2View® Weight: 150 g/5.3 oz. (without batteries) Radio type Spread Spectrum Bidirectional RF Operating frequency 868/915/920 MHz Installation/Mounting Transmission security AES algorithm encryption Camera/Base One screw secures camera to base; Supervision Polled signal every 8 minutes two screws secure camera base to mounting Antenna Integrated surface, flat or corner mount. Tamper detection Wall and cover tampered Mounting Height 2.1 m/6.9 ft. Camera sensor type CMOS black and white Camera resolution 320 x 240 pixels Camera sensitivity 0.2 lux Camera lens Wide angle 85° Camera response Less than 100 milliseconds after PIR detection Video sequence in intrusion 5 frames/s for 10 seconds DCVA means DCVA600 for USA/Canada, DCVA700 for Australia/ Night illumination 2 infrared LED Singapore and DCVA200 for Europe and rest of the world. Night illumination switching Automatic Night illumination distance 4.5 m/14 ft. Motion detector technology Passive infrared DSP Motion detector type Dual element Motion Lens Fresnel Motion Detection angle 90° Motion Detection distance 12 m/40 ft. Motion Detection pattern 24 facets: 9 main–12 m/40 ft. 8 intermediate–8 m/26 ft. 5 short–4 m/13 ft. 2 creep zones–1.2 m/4 ft. Operating temperature 0°/+40°C (32°/104°F) Maximum relative humidity 70%, non-condensing Approvals CE / EN50131 / EN300220 / IDA / NCP (DCVA200) FCC (DCVA600) A-Tick (DCVA700) EMEA SALES North American Headquarters 2, rue Alexis de Tocqueville 4455 White Bear Parkway, Suite 700 92160 ANTONY White Bear Lake, MN 55110 FRANCE USA Phone +33 (0)1 55 59 10 25 Phone 877-206-5800 Fax +33 (0)3 90 20 66 36 Fax 651-762-4693 www.videofied.com © 2009 RSI VIDEO TECHNOLOGIES. VIDEOFIED ® is a Registered Trademark of RSI VIDEO TECHNOLOGIES. S2View ® is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without notice.