05 dislocation theory

Suranaree University of Technology May-Aug 2007
Dislocation theoryDislocation theory
Subjects of interest
• Introduction/Objectives
• Observation of dislocation
• Burgers vector and the dislocation loop
• Dislocation in the FCC, HCP and BCC lattice
• Stress fields and energies of dislocations
• Forces on dislocations and between dislocations
Chapter 5
Tapany Udomphol

Dislocation theoryDislocation theory
Subjects of interest (continued)
• Dislocation climb
• Intersection of dislocations
• Jogs
• Dislocation sources
• Multiplication of dislocations
• Dislocation-point defect interactions
• Dislocation pile-ups
Chapter 5
Tapany Udomphol

ObjectivesObjectives
• This chapter emphasises the understanding of the
effects of dislocation behaviour on FCC, BCC and HCP
crystal structures.
• This includes the interaction of dislocations such as
climb, jogs, intersection and multiplication of dislocations
and the roles of dislocations on plastic deformation of
metals.
Tapany Udomphol

IntroductionIntroduction
Dislocations introduce imperfection into the structure and therefore
these could explain how real materials exhibit lower yield stress value
than those observed in theory.
Dislocations
Produce
imperfection in
crystal structures
51450 x
• Lower the yield stress from
theoretical values.
• Produce plastic deformation
(strain hardening).
• Effects mechanical properties
of materials.
Tapany Udomphol

Observation of dislocationsObservation of dislocations
A variety of techniques have been used to observe dislocations in
the past 20 years to aid the better understanding of dislocation
behaviour.
Chemical (etch–pit) technique
• Using etchant which forms a pit at the
point where a dislocation intersect the
surface.
• Preferential sites for chemical attack are
due to strain field around dislocation sites
(anodic).
• Can be used in bulk samples but limited in
low dislocation density crystal (104 mm-2).
5000 x
Etch pits on slip bands in alpha
brass crystals
Note: Pits are 500 Ao apart and with
the dislocation density of 108 mm-2.
Tapany Udomphol

Decoration of dislocation techniqueDecoration of dislocation technique
A small amount of impurity is added to form precipitates after
suitable heat treatment to give internal structure of the
dislocation lines.
• Hedges and Mitchell first used
photolytic to decorate dislocation in
AgBr.
• Rarely used in metals but in ironic
crystals such as AgCl, NaCl, KCl
and CaF2.
Hexagonal network of dislocations
in NaCl detected by a decoration
technique.
Tapany Udomphol

Transmission electron microscope (TEM)Transmission electron microscope (TEM)
TEM is the most powerful technique used to study dislocations.
• A thin foil of 100 nm is prepared using
electropolishing from a ~1 mm thick sheet.
• This thin foil is transparent to electrons in
the electron microscope and this makes it
possible to observed dislocation
networks, stacking faults, dislocation
pile-ups at grain boundaries.
Dislocation network in cold-worked
aluminium.
32500 x• By using the kinematic and dynamic
theories of electron diffraction it is possible
to determine the dislocation number,
Burgers vectors and slip planes.
Note: The sampling area is small therefore the properties
observed cannot represent the whole materials.
Tapany Udomphol

XX--ray microscopyray microscopy
• Using an X-ray technique to detect dislocation structure.
• The most common techniques are the Berg-Barret reflection
method and the Lang topography method.
• The resolution is limited to 103 dislocations/mm2.
Tapany Udomphol

Burgers vector and theBurgers vector and the
dislocation loopdislocation loop
Burgers vector is the most
characteristic feature of a
dislocation, which defines the
magnitude and the direction of slip.
• Screw Burgers vector is // to the
dislocation line.
• Edge Burgers vector is to the
dislocation line.
Macroscopic deformation produced by glide of
(a) edge dislocation and (b) screw dislocation.
• Both shear stress and final
deformation are identical for both
situations.
Note: Most dislocations found in crystalline materials are
probably neither pure edge or pure screw but mixed.
Tapany Udomphol

Dislocation loopsDislocation loops
Dislocations in single crystals are straight lines. But in general,
dislocations appear in curves or loops, which in three
dimensions form and interlocking dislocation network.
Dislocation loop lying in
a slip plane.
• Any small segments of the dislocation
can be resolved into edge and screw
components.
• Ex: pure screw at point A and pure edge
at point B where along most of its length
contains mixed edge and screw. But with
the same Burgers vector.
Tapany Udomphol

Burgers circuitBurgers circuit
Burgers circuit is used to define the Burgers vector of dislocation.
Burgers circuits
around edge
dislocation
• If we trace a clockwise path from start to finish, the closure
failure from finish to start is the Burgers vector b of the
dislocation, see fig (a).
• A right-handed screw dislocation, fig (b), is obtained
when transversing the circuit around the dislocation line and
we then have the helix one atomic plane into the crystal.
Burgers circuits
around screw
dislocation
(a) (b)
Tapany Udomphol

Cross slipCross slip
In FCC cubic metals, the screw dislocations move in {111} type
planes, but can switch from one {111} type plane to another if it
contains the direction of b. This process is called cross-slip.
• A screw dislocation at S is free to
glide in either (111) or (111)
closed-packed planes.
• Double cross slip is shown in (d).
Cross slip in a face-centred cubic crystal.
S
Cross slip on the polished surface
of a single crystal of 3.25% Si iron.
Dislocation
Tapany Udomphol

Dislocation dissociationDislocation dissociation
Dislocation dissociation occurs when the strength of
dislocation is more than unity. The system becomes unstable
dislocation therefore dissociate into two dislocation.
Note: Dislocation of unit strength is a dislocation with a Burgers
vector equal to one lattice spacing.
The dissociation reaction b1 b2 + b3 will occur
when b1
2 > b2
2 + b3
2.
• A dislocation of unit strength has a minimum energy
when its Burgers vector is parallel to a direction of closest
atomic packing.
• In close-packed lattices, dislocations with strength less
than unity are possible. therefore crystals always slip in
the close-packed direction.
Tapany Udomphol

Dislocations in FCC latticeDislocations in FCC lattice
• Slip occurs in the FCC lattice on the {111} plane in the <110> direction
and with a Burgers vector (a/2)[110].
• The {111} planes are stacked on a close packed sequence ABCABC
and vector b = (ao/2)[101] defines one of the observed slip direction,
which can favourably energetically decompose into two partial
dislocations.
[ ] ]112[
6
211
6
]101[
2
321
ooo aaa
bbb
+→
+→
Shockley partials
This Shockley partials creates a
stacking fault ABCAC/ABC.
Dissociation of a dislocation to
two partial dislocations.
No slipFully slipped
Faulted
region
Extended dislocation
Tapany Udomphol

Dissociation of a dislocation into twoDissociation of a dislocation into two
partial dislocationspartial dislocations
• The combination of the two partials AC and
AD is known as an extended dislocation.
• The region between them is a stacking
fault which has undergone slip.
• The equilibrium of these partial dislocations
depends on the stacking fault energy.
Group of stacking fault in 302 stainless
steel stopped at boundary
Stacking fault
www.msm.cam.ac.uk
No slipFully slipped
Faulted
region
Extended dislocation
Tapany Udomphol

The wider region between partial dislocation,
the lower stacking fault energy
Metal Stacking fault energy (mJ m-2)
Brass
303 stainless steel
304 stainless steel
310 stainless steel
Silver
Gold
Copper
Nickel
Aluminium
<10
8
20
45
~25
~50
~80
~150
~200
Typical values of stacking fault energy
• Aluminium – high stacking fault energy
more likely to cross slip.
• Copper – lower stacking fault energy
cross slip is not prevalent.
Stacking faultsStacking faults
Stacking fault
Partial
dislocations
Slip plane
Model of a stacking fault.
• Characteristics of metals with
low SPF;
1) Easy to strain harden
2) Easy for twin annealing to occur
3) Temperature dependent flow
stress
Tapany Udomphol

Frank partial dislocationsFrank partial dislocations
Frank partial dislocation or sessile
dislocation.
• A set of (111) plane (viewed from the edge) has a missing middle A
plane with a Burgers vector (ao/3) [111] perpendicular to the central
stacking fault.
• Unlike perfect dislocation, Frank partial dislocation cannot move
by glide (sessile dislocation) but by diffusion of atom.
Frank partial dislocations are
another type of partial dislocation in
FCC lattice, which provide
obstacles to the movement of other
dislocations.
Tapany Udomphol

Lomer-Cortrell barrier
Lomer-Cortrell barrier
Intersection of {111} plane during
duplex slip by glide of dislocations is
called Lomer-Cortrell barrier.
Ex: consider two perfect dislocations
lying in different {111} planes and
both parallel to the line of intersection
of the {111} plane.
]011[
2
]110[
2
]101[
2
ooo aaa
→+
The new dislocation obtained has reduced energy.
Tapany Udomphol

Dislocations in HCP latticeDislocations in HCP lattice
• Slip occurs in the HCP lattice on the basal (0001) plane in the
<1120> direction.
• The basal (0001) plane the close packed of a sequence ABABAB
and a Burgers vector b = (ao/3)[1120].
• Dislocations in the basal plane can reduce their energy by
dissociating into Shockley partials according to the reaction.
]0110[
3
]1010[
3
]1120[
3
ooo aaa
+→
The stacking fault produced by this reaction lies in the basal
plane, and the extended dislocation which forms it is confined to
glide in this plane.
Tapany Udomphol

Dislocations in BCC cubic latticeDislocations in BCC cubic lattice
• Slip occurs in the BCC lattice on {110}, {112}, {123} planes in the
<111> direction and a Burgers vector b = (ao/2)[111].
Cottrell has suggested a dislocation reaction which appears to cause
immobile dislocations. (ao/2[001] in iron) leading to a crack
nucleus formation mechanism for brittle fracture.
the dislocation is immobile since
the (001) is not a close-packed slip
plane, the (001) plane is therefore
the cleavage plane when brittle
fracture occurs.
Slip on intersecting (110) plane.
(001) Cleavage plane
[ ]111
2
a
(101) Slip plane
(101) Slip plane
[ ]111
2
a
[ ]001ab =
Applied stressσσσσ
σσσσ
Cleavage knife crack of length c
for displacement nb
[ ] [ ] [ ]001111
2
111
2
a
aa
→+
]001[]111[
2
]111[
2
o
oo
a
aa
→+
Tapany Udomphol

Stress fields of dislocationsStress fields of dislocations
A dislocation is surrounded by an elastic stress field that
produces forces on other dislocations and results in interaction
between dislocations and solute atoms.
• The cross section of an elastic cylindrical
piece (dashed line) has been distorted after
an edge dislocation running through point O
parallel to the z axis (blue line).
• The strain is zero in the z axis and
therefore can be treated in plane strain (x-y).
• The stresses vary inversely with distance
from the dislocation line and become
infinite at r = 0.
r
bo
r
θτ
σσ θ
sin−
==
• The shear stress ττττxy is a maximum
in the slip plane, when y = 0.
( )
222
22
)( yx
yxbx
oxy
+
−
=ττ
…Eq. 1
…Eq. 2
y
xO θθθθ
ro
P
Q
r
Deformation of a circle containing
an edge dislocation.
A’ A
b
Tapany Udomphol

Strain energies of dislocationsStrain energies of dislocations
The strain energy involved in the
formation of an edge dislocation can
be estimated from the work involved in
displacement the cut OA a distance b
along the slip plane.
or
rGb
U 1
2
ln
)1(4 νπ −
=
y
xO θθθθ
ro
P
Q
r
Deformation of a circle containing
an edge dislocation.
A’ A
b
…Eq. 3
The strain energy of a screw
dislocation is given by
or
rGb
U 1
2
ln
4π
= …Eq. 4
Note: the total strain energy is the
sum of elastic strain energy and
the core energy of dislocation.
The dislocation energy per unit
length simplifies to
2
2
Gb
U = …Eq. 5
Tapany Udomphol

Forces on dislocationForces on dislocation
b
dl
ds
Force acting on a dislocation line.
• A dislocation line moving in the
direction of its Burgers vector under the
influence of a uniform shear stress ττττ.
• The force per unit length of dislocation F ;
b
dlds
dW
F τ==
• This force is normal to the dislocation
line at every point along its length and is
directed toward the unslipped part of
the glide plane.
• The Burgers vector is constant along
the curved dislocation line.
…Eq. 6
Tapany Udomphol

Forces between dislocationsForces between dislocations
• Dislocations of opposite sign on the same slip plane will
attract each other, run together, and annihilate each other.
• Dislocations of alike sign on the same slip plane will repel
each other
The radial force Fr between
two parallel screw dislocations
r
Gb
bF zr
π
τθ
2
2
==
Parallel screw (same sign) +
Aniparallel screw (opposite sign) -
The radial and tangential
forces between two parallel
edge dislocations
r
Gb
F
r
Gb
Fr
θ
νπνπ θ
2sin
)1(2
,
1
)1(2
22
−
=
−
=
…Eq. 8
…Eq. 7
Tapany Udomphol

Dislocation climbDislocation climb
Dislocation climb is a non conservative movement of dislocation
where and edge dislocation can move out of the slip plane onto a
parallel directly above or below the slip plane.
Note: Glide or slip of a dislocation is the direction parallel to its
direction whereas climb of dislocation is in the vertical direction.
• Positive direction of climb is when
the edge dislocation moves upwards.
Removing extra atom (or adding vacancy
around ). Compressive force
produces + climb.
• Negative direction of climb is when
the edge dislocation moves downwards.
Atom is added to the extra plane. Tensile
forces to produce – climb.
(a) Diffusion of
vacancy to edge
dislocation.
(b) Dislocation
climbs up one
lattice spacing.
• Climb is diffusion-controlled (thermal activated) and occurs more
readily at elevated temperature. important mechanism in creep.
Tapany Udomphol

Intersection of dislocationsIntersection of dislocations
The intersection of two dislocations produces a sharp
break (a few atom spacing in length) in dislocation line.
• Jog is a sharp break in the dislocation
moving it out of the slip plane.
This break can be of two types;
• Kink is a sharp break in the dislocation line
which remains in the slip plane.
Note: Dislocation intersection mechanisms play an important
role in the strain hardening process.
Tapany Udomphol

(a), (b) Kinks in edge and
screw dislocations
(c), (d) Jogs in edge and
screw dislocations.
Jogs are steps on the dislocation which move it from one atomic
slip plane to another.
Kinks are steps which displace it on the same slip plane.
Jogs and KinksJogs and Kinks
Tapany Udomphol

Intersection of two dislocationsIntersection of two dislocations
Intersection of two
edge dislocations
1) Intersection of two dislocations with
Burgers vectors at right angle to each other.
• An edge dislocation XY with Burgers vector b1
is moving on plane Pxy and cuts through
dislocation AB with Burgers vector b2.
• The intersection causes jog PP’ in dislocation
AB parallel to b1 and has Burgers vector b2.
and with the length of the jog = b1.
• It can readily glide with the rest of dislocation.
Note: b1 is normal to AB and jogs AB, while
b2 is parallel to XY and no jog is formed.
b1
b2
Tapany Udomphol

2) Intersection of two dislocations with
Burgers vectors parallel to each other
Intersection of edge dislocations
with parallel Burgers vectors.
• Both dislocations are jogged.
• The length of jog PP’ is b1 and
the length of jog QQ’ is b2.
• The jogs both have a screw
orientation and lie in the original
slip plane. This is called Kink.
not stable.
Before
intersection
After
intersection
Tapany Udomphol

3) Intersection of edge and
screw dislocations.
4) Intersection of two screw
dislocations.
Intersection produces a jog with an
edge orientation on the edge
dislocation and a kink with an edge
orientation on the screw dislocation.
The intersection produces jogs
of edge orientation in both screw
dislocations. very important in
plastic deformation.
Note: at temperature where climb
cannot occur the movement of screw
dislocation is impeded by jogs.
Tapany Udomphol

JogsJogs
Movement of jogged screw dislocation
(a) Straight dislocation under zero stress.
(b) Dislocation bowed out in slip plane
between the jogs due to applied shear stress.
(c) Movement of dislocation leaving trails of
vacancies behind the jogs.
• A stable jog length of the dislocation line energy of the crystal
(a) Many intersections occur when a
screw dislocation encounter a forest of
screw dislocations. producing
vacancy jogs and/or interstitial jogs.
(b) Jogs act as pinning points and
cause dislocations to bow out with
the radius R when the shear stress
ττττ is applied.
(c) At some critical radius Rc the ττττ
required to further decrease R > the
stress needed for non-conservative
climb. Then the dislocation will move
forward leaving a trail of vacancies
(interstitials) behind each jog.
Tapany Udomphol

SuperjogsSuperjogs
Superjog is a jog that has more than one atomic slip plane spacing high.
As the stress increases, the dislocation bows out between the
superjogs, generating dislocation dipoles and later break into
isolated loops.
Formation of dislocation loops from a dislocation dipole
(a) Dislocation dipole. (b) Elongated loop and
jogged dislocation.
(c) Row of small loops.
Tapany Udomphol

Dislocation SourcesDislocation Sources
• All metals initially contain an appreciable number of
dislocations produced from the growth of the crystal from
the melt or vapour phase.
• Gradient of temperature and composition may affect
dislocation arrangement.
• Irregular grain boundaries are believed to be responsible
for emitting dislocations.
• Dislocation can be formed by aggregation and collapse of
vacancies to form disk or prismatic loop.
• Heterogeneous nucleation of dislocations is possible from
high local stresses at second-phase particles or as a result
of phase transformation.
Tapany Udomphol

Multiplication of dislocationsMultiplication of dislocations
The operation of Frank-Read source
Frank & Read proposed that dislocations
could be generated from existing dislocations.
• The dislocation line AB bulges out
(A and B are anchored by impurities)
and produces slip as the shear
stress ττττ is applied.
• The maximum ττττ for
semicircle dislocation
bulge, fig (b)
l
Gb
R
Gb
≈≈
2
τ
• Beyond this point, the dislocation loop
continues to expand till parts m and n
meet and annihilate each other to form a
large loop and a new dislocation.
Note: Repeating of this process producing a
dislocation loop, which produces slip of one
Burgers vector along the slip plane.
Frank Read source in a silicon crystal

DislocationDislocation--point defect interactionspoint defect interactions
Point defect and dislocation will interact elastically and
exert forces on each other.
Negative interaction energy attraction
Positive interaction energy repulsion
If the solute atom is
larger than the
solvent atom (εεεε > 1)
• Vacancies will be attracted to regions of compression.
• Interstitials will be collected at regions of tension.
The atom will be repelled from the
compressive side of a positive edge
dislocation and will be attracted to the
tension side.
If the solute atom is
smaller than the
solvent atom (εεεε < 1)
The atom will be attracted to the
compression side.
Tapany Udomphol

Dislocation pileDislocation pile--upsups
Dislocation pile-ups at an obstacle.
Dislocations often pile up
on slip planes at barriers
i.e., grain boundaries or
second phase particles.
High stress concentration on the
leading dislocations in the pile-up.
If the pile-up stress > theoretical shear stress yielding
A pile-up of n dislocations along
a distance L can be considered
as a giant dislocation with a
Burgers vector nb.
The breakdown of a barrier occur by
1) Slip on a new plane.
2) Climb of dislocation around the
barrier.
3) Generation of high enough tensile
stress to produce a crack.
Tapany Udomphol

ReferencesReferences
• Dieter, G.E., Mechanical metallurgy, 1988, SI metric edition,
McGraw-Hill, ISBN 0-07-100406-8.
• Sanford, R.J., Principles of fracture mechanics, 2003, Prentice
Hall, ISBN 0-13-192992-1.
• W.D. Callister, Fundamental of materials science and
engineering/ an interactive e. text., 2001, John Willey & Sons, Inc.,
New York, ISBN 0-471-39551-x.
• Hull, D., Bacon, D.J., Introduction to dislocations, 2001, Forth
edition, Butterworth-Heinemann, ISBN 0-7506-4681-0.
Tapany Udomphol

05 dislocation theory

More Related Content

What's hot (20)

Similar to 05 dislocation theory (20)

Recently uploaded (20)

05 dislocation theory