14 FILE Server
Download as PPTX, PDF2 likes469 views
The document outlines the steps to configure a file server on an Ubuntu system using Samba to share files over a network. It describes installing and updating Ubuntu, setting a static IP, installing Samba and setting a password, creating a shared directory, configuring Samba's smb.conf file to define the share, and installing OpenSSH for remote access.
![SHARE DIRECTORY
• Sudo nano /etc/samba/smb.conf
[share]
Patch = /home/server/share
Valid users = server
Read only = no
• Sudo service smbd restart
• Testparm](https://image.slidesharecdn.com/14-fileserver-190907073945/85/14-FILE-Server-8-320.jpg)
14 FILE Server
- 1. NETWORK FILE SHARING SERVER PREPARED BY HAEMDA HURMAT
- 2. OVERVIEW • Explain about File Server • Installation of File Server • Configuration of File Server
- 3. FILE SERVER (NETWORK FILE SHARING SERVER) NFS • One of the most common ways to network Ubuntu and Windows computers is to configure Samba as a File Server. This section covers setting up a Samba server to share files with Windows clients. • The server will be configured to share files with any client on the network without prompting for a password. If your environment requires stricter Access Controls see Securing File and Print Server.
- 4. UPDATE UBUNTU • Sudo apt-get install update • Sudo apt-get upgrade
- 5. SET NETWORK INTERFACE STATIC IP • Sudo nano /etc/network/interfaces
- 6. INSTALL SAMBA AND SET PASSWORD • Sudo apt-get install samba • Sudo smbpasswd -a hameda
- 7. MAKE DIRECTORY • Mkdir /home/server/share
- 8. SHARE DIRECTORY • Sudo nano /etc/samba/smb.conf [share] Patch = /home/server/share Valid users = server Read only = no • Sudo service smbd restart • Testparm
- 9. INSTALL SSH SERVER AND RESTART • Sudo apt-get install openssh-server • Sudo service ssh restart
- 10. Thank You ?