Associated issues: Timber and Environmental Building Atrium Roof to Deerubbin Centre Warwick Donnelly
Issues Engineered timber products Waste  Building Rating Tools Environmental labelling systems
1. Engineered wood products Products manufactured from timber fibres using gluing to produce large sections or long lengths Glued strand products (OSB, LSL, ESL, …)  LVL  - I beams Box beams - Glulam Plywood Often used when large sections are not available. Efficient material use! Portal frames under construction Photo: TRADAC
Benefits Engineered timber products, such as I-beams, glulam beams and plywood offer the builder/designer: design flexibility good environmental performance increased structural ability
Design flexibility Engineered wood products can be manufactured to suit a specific design. The properties of the timber are optimised to suit the particular design.  Timber house of the Future
Environmental performance Engineered wood products are made predominantly from plantation timbers (mostly pine). Therefore:-  Carbon is sequestered in their use; Low embodied energy; Resource minimisation. Carbon sequestered
Uses large cross-sections for large span beams or truss elements panel members - bracing, architectural curved or unusual shapes  large panel elements - floor, roof, ceiling cladding (minor axis bending)
LVL Made by  laminating  thin (3 to 5 mm thick)  sheets  together to form long, deep sections.  Most often used as beams Often used where  appearance is not important  or where  long straight lengths  are required.
Glulam Made by laminating sawn timber together to form deep sections with potential for manufacturing curved shapes Most often used as  beams Often used where  appearance  is important   or where  interesting forms  are needed. House, Cairns, Qld Photo: Debbie Falck Jarrah GL potash storage shed,  Cape Cuvier, WA Photo: Bunnings
Plywood Made by  laminating  thin (3 to 5 mm thick)  sheets  together to form sheets.  Laminates have  alternate directions  for each layer High shear properties – suitable as  bracing  and  webs St Brigid Chapel Slavin Architects
I-beams Timber/LVL flanges Plywood /OSB webs Lightweight Suitable for uniformly distributed loads on medium spans Design aids and information available from manufacturers :
Box beams Timber/LVL flanges Two plywood /OSB webs Usually purpose built Suitable for larger spans Torsionally stiff Can use decorative plywood Used in portal frames Box beam with  LVL chords and plywood webs Photo: Geoff Boughton
Timber strand products OSB (Oriented Strand Board)  Thin sheets pressed from wafers of wood that are laid down and pressed to give panels  can be used wherever plywood is used ESL (Engineered Strand Lumber)  Similar process to OSB, but pressed into linear members to act as long or deep beams  Can be used wherever LVL is used Forestry Science Centre  Uni of British Columbia, Canada Photo: Gary Williams OSB Photo: Weyerhaeuser USA
2. Waste Waste is a serious environmental problem in the construction industry. A way to minimise waste is using the waste hierarchy:   Reduce,  Reuse,  Recycle
Reduce! Using a lightweight timber construction option reduces the amount of material used to construct a dwelling in the first place; Timber frames and trusses can be pre-fabricated off-site and delivered, helping centralise and minimise waste at a factory; Careful planning and using waste management plans can minimise waste onsite;
Reuse! Off cuts can be reused on site as smaller components in timber framing;
Recycle! Any treated timber should be separated from untreated timber and disposed of separately; Timber waste can be recycled and used as a renewable energy source or as mulch.
3. Building rating tools There are various building rating tools designed to measure the environmental performance of buildings. These include:- National Australian Built Environment Rating System, NABERS; Nationwide House Energy Rating Scheme, NatHERS; BASIX
National Australian Built Environment Rating System, NABERS NABERS is a flexible rating system, applicable to commercial development and homes, that rates existing buildings against environmental criteria including energy use, water use, air quality, storm water run off; It is a voluntary system that will enable building owners to increase their awareness of sustainability in the built environment; NABERS has been developed by the Australian Government.
Nationwide House Energy Rating Scheme, NatHERS AccuRate is a CSIRO developed tool that rates the design of a building in terms of how well they are designed to minimise energy use to maintain comfort, (thermal efficiency) AccuRate is a second generation thermal efficiency modelling software (update of the first generation software NatHERS); NatHERS is used in BASIX to rate the thermal efficiency component of energy consumption.
The Building Sustainability Index (BASIX) BASIX is a NSW Government initiative that ensures new homes are designed and built to use less potable water and use less energy. One aspect of energy reduction is increasing thermal efficiency.
BASIX BASIX currently does not consider embodied energy, only the thermal efficiency of the dwelling. Timber constructions can be made thermally efficient using an appropriate passive solar design.
Building rating systems All building rating systems have the aim of reducing the impact of a building on the environment; Building rating systems are now being incorporated into law. (eg BASIX in NSW)
4. Environmental labelling systems Forestry Certification schemes are run by third parties and aim to ensure that Forests are managed in an Ecologically Sustainable manner Timber sourced from a certified forest can be labelled by the certifying body The two main certifying bodies in Australia are Australian Forestry Standard Ltd (AFS) and the Forest Stewardship Council (FSC)
Certification internationally The two dominant international certification schemes are: the Programme for endorsement of Forestry Certification; previously - Pan European Forest Certification Scheme (PEFC) covering a volume of 5 157 003 ha or forests, &  Forest Stewardship Council (FSC) Certification covering a volume of  535 509 ha of forest.
Certification schemes Once Chain of Custody can be established, (from sustainably managed forest to consumer) the certifying bodies will label timber at point of sale. This will allow builders to choose the environmentally sustainable option for building.
Conclusion Timber is an  environmentally friendly  material that offers the designer and builder  flexibility in its use . An understanding of the properties and applications of timber will aid the designer and builder construct environmentally friendly buildings, and  contribute to a sustainable built environment .

More Related Content

PDF
A Developmental Pathway to Lean
PDF
Radical simplicity in Passivhaus Timber Building
PDF
Green building
PPTX
House Design Presentation
PDF
Sustainable building designs
DOC
Design concept of Green Building
PPTX
Green wall
PPT
Passive House In Depth for Professionals
A Developmental Pathway to Lean
Radical simplicity in Passivhaus Timber Building
Green building
House Design Presentation
Sustainable building designs
Design concept of Green Building
Green wall
Passive House In Depth for Professionals

Viewers also liked (20)

PPT
Presentation (new)
PPTX
Timber- Building material
PDF
A Starter Guide to IT Managed Services
PDF
WHAT IS GRAPHIC DESIGN? (Intro to GD, Wk 1)
PPT
Timber frame construction presentation`gr
PPTX
SHALLOW FOUNDATION
PPT
Building materials
PDF
Bld62003 timber mak
PPT
Superstructure construction
PDF
Timber construction
PPT
3. application of timber in environmental building
PPTX
Pile foundation ppt
PPTX
Timber - Types of Woods, Plywood, Veneer, Laminate, Blockboard with Market Su...
PPT
5. timber seasoning
PPT
types of Foundations with animated sketches
PPT
Timber ppt-1
PPTX
Timber flooring
PDF
Graphic Design 101
PPTX
Types of Lighting and Luminaire
Presentation (new)
Timber- Building material
A Starter Guide to IT Managed Services
WHAT IS GRAPHIC DESIGN? (Intro to GD, Wk 1)
Timber frame construction presentation`gr
SHALLOW FOUNDATION
Building materials
Bld62003 timber mak
Superstructure construction
Timber construction
3. application of timber in environmental building
Pile foundation ppt
Timber - Types of Woods, Plywood, Veneer, Laminate, Blockboard with Market Su...
5. timber seasoning
types of Foundations with animated sketches
Timber ppt-1
Timber flooring
Graphic Design 101
Types of Lighting and Luminaire
Ad

Similar to 4. associated issues (20)

PDF
Why the Lumber-An illustrative Depiction.pdf
PPTX
Presentation1
PPT
2. timber as a sustainable building material
PPTX
Timber
PPTX
Green Star & Wood Products - Lunch & Learn
PDF
Pgb unit iv kameswara rao marthi
PPSX
Engineered Wood Sustainability And Green Building Practices Slide Show
PPTX
Green building technology
PPTX
Clt mtb seminar_presentation_four
PDF
Timber construction
DOCX
Minor project
PPTX
Sustainable design for a low carbon footprint by Fabiano Ximenes
PPTX
Lamboo general and product lines
PPTX
green building.pptx
PDF
Engineers Role In Green
DOCX
Sustainable building materials in Green building construction.
PDF
Use_of_sustainable_green_materials_in_construction.pdf
PDF
Lowen story
PDF
GREEN BUILDING MATERIALS FOR SUISTAINABLE ARCHITECTURE AND BUILDING STUDY
PPTX
Wood As A Sustainable Material
Why the Lumber-An illustrative Depiction.pdf
Presentation1
2. timber as a sustainable building material
Timber
Green Star & Wood Products - Lunch & Learn
Pgb unit iv kameswara rao marthi
Engineered Wood Sustainability And Green Building Practices Slide Show
Green building technology
Clt mtb seminar_presentation_four
Timber construction
Minor project
Sustainable design for a low carbon footprint by Fabiano Ximenes
Lamboo general and product lines
green building.pptx
Engineers Role In Green
Sustainable building materials in Green building construction.
Use_of_sustainable_green_materials_in_construction.pdf
Lowen story
GREEN BUILDING MATERIALS FOR SUISTAINABLE ARCHITECTURE AND BUILDING STUDY
Wood As A Sustainable Material
Ad

More from jbusse (12)

PPT
CPCCCA3009A Construct Advanced Roofs Octagonal end roof
PPT
CPCCCA3009A Construct Advanced Roofs Oblique roof
PPSX
Lecture2
PPSX
Installation JB2011
PPSX
4 internal lining
PPT
1. ecologically sustainable development
PPSX
Using span tables as1684 2
PPT
Genral code sub floor
PPT
Sub floor code
PPTX
Booking sheets, 2011 v1
PPTX
Explosive power tools
PPTX
Roof framing cdujb
CPCCCA3009A Construct Advanced Roofs Octagonal end roof
CPCCCA3009A Construct Advanced Roofs Oblique roof
Lecture2
Installation JB2011
4 internal lining
1. ecologically sustainable development
Using span tables as1684 2
Genral code sub floor
Sub floor code
Booking sheets, 2011 v1
Explosive power tools
Roof framing cdujb

4. associated issues

  • 1. Associated issues: Timber and Environmental Building Atrium Roof to Deerubbin Centre Warwick Donnelly
  • 2. Issues Engineered timber products Waste Building Rating Tools Environmental labelling systems
  • 3. 1. Engineered wood products Products manufactured from timber fibres using gluing to produce large sections or long lengths Glued strand products (OSB, LSL, ESL, …) LVL - I beams Box beams - Glulam Plywood Often used when large sections are not available. Efficient material use! Portal frames under construction Photo: TRADAC
  • 4. Benefits Engineered timber products, such as I-beams, glulam beams and plywood offer the builder/designer: design flexibility good environmental performance increased structural ability
  • 5. Design flexibility Engineered wood products can be manufactured to suit a specific design. The properties of the timber are optimised to suit the particular design. Timber house of the Future
  • 6. Environmental performance Engineered wood products are made predominantly from plantation timbers (mostly pine). Therefore:- Carbon is sequestered in their use; Low embodied energy; Resource minimisation. Carbon sequestered
  • 7. Uses large cross-sections for large span beams or truss elements panel members - bracing, architectural curved or unusual shapes large panel elements - floor, roof, ceiling cladding (minor axis bending)
  • 8. LVL Made by laminating thin (3 to 5 mm thick) sheets together to form long, deep sections. Most often used as beams Often used where appearance is not important or where long straight lengths are required.
  • 9. Glulam Made by laminating sawn timber together to form deep sections with potential for manufacturing curved shapes Most often used as beams Often used where appearance is important or where interesting forms are needed. House, Cairns, Qld Photo: Debbie Falck Jarrah GL potash storage shed, Cape Cuvier, WA Photo: Bunnings
  • 10. Plywood Made by laminating thin (3 to 5 mm thick) sheets together to form sheets. Laminates have alternate directions for each layer High shear properties – suitable as bracing and webs St Brigid Chapel Slavin Architects
  • 11. I-beams Timber/LVL flanges Plywood /OSB webs Lightweight Suitable for uniformly distributed loads on medium spans Design aids and information available from manufacturers :
  • 12. Box beams Timber/LVL flanges Two plywood /OSB webs Usually purpose built Suitable for larger spans Torsionally stiff Can use decorative plywood Used in portal frames Box beam with LVL chords and plywood webs Photo: Geoff Boughton
  • 13. Timber strand products OSB (Oriented Strand Board) Thin sheets pressed from wafers of wood that are laid down and pressed to give panels can be used wherever plywood is used ESL (Engineered Strand Lumber) Similar process to OSB, but pressed into linear members to act as long or deep beams Can be used wherever LVL is used Forestry Science Centre Uni of British Columbia, Canada Photo: Gary Williams OSB Photo: Weyerhaeuser USA
  • 14. 2. Waste Waste is a serious environmental problem in the construction industry. A way to minimise waste is using the waste hierarchy: Reduce, Reuse, Recycle
  • 15. Reduce! Using a lightweight timber construction option reduces the amount of material used to construct a dwelling in the first place; Timber frames and trusses can be pre-fabricated off-site and delivered, helping centralise and minimise waste at a factory; Careful planning and using waste management plans can minimise waste onsite;
  • 16. Reuse! Off cuts can be reused on site as smaller components in timber framing;
  • 17. Recycle! Any treated timber should be separated from untreated timber and disposed of separately; Timber waste can be recycled and used as a renewable energy source or as mulch.
  • 18. 3. Building rating tools There are various building rating tools designed to measure the environmental performance of buildings. These include:- National Australian Built Environment Rating System, NABERS; Nationwide House Energy Rating Scheme, NatHERS; BASIX
  • 19. National Australian Built Environment Rating System, NABERS NABERS is a flexible rating system, applicable to commercial development and homes, that rates existing buildings against environmental criteria including energy use, water use, air quality, storm water run off; It is a voluntary system that will enable building owners to increase their awareness of sustainability in the built environment; NABERS has been developed by the Australian Government.
  • 20. Nationwide House Energy Rating Scheme, NatHERS AccuRate is a CSIRO developed tool that rates the design of a building in terms of how well they are designed to minimise energy use to maintain comfort, (thermal efficiency) AccuRate is a second generation thermal efficiency modelling software (update of the first generation software NatHERS); NatHERS is used in BASIX to rate the thermal efficiency component of energy consumption.
  • 21. The Building Sustainability Index (BASIX) BASIX is a NSW Government initiative that ensures new homes are designed and built to use less potable water and use less energy. One aspect of energy reduction is increasing thermal efficiency.
  • 22. BASIX BASIX currently does not consider embodied energy, only the thermal efficiency of the dwelling. Timber constructions can be made thermally efficient using an appropriate passive solar design.
  • 23. Building rating systems All building rating systems have the aim of reducing the impact of a building on the environment; Building rating systems are now being incorporated into law. (eg BASIX in NSW)
  • 24. 4. Environmental labelling systems Forestry Certification schemes are run by third parties and aim to ensure that Forests are managed in an Ecologically Sustainable manner Timber sourced from a certified forest can be labelled by the certifying body The two main certifying bodies in Australia are Australian Forestry Standard Ltd (AFS) and the Forest Stewardship Council (FSC)
  • 25. Certification internationally The two dominant international certification schemes are: the Programme for endorsement of Forestry Certification; previously - Pan European Forest Certification Scheme (PEFC) covering a volume of 5 157 003 ha or forests, & Forest Stewardship Council (FSC) Certification covering a volume of 535 509 ha of forest.
  • 26. Certification schemes Once Chain of Custody can be established, (from sustainably managed forest to consumer) the certifying bodies will label timber at point of sale. This will allow builders to choose the environmentally sustainable option for building.
  • 27. Conclusion Timber is an environmentally friendly material that offers the designer and builder flexibility in its use . An understanding of the properties and applications of timber will aid the designer and builder construct environmentally friendly buildings, and contribute to a sustainable built environment .