4.Process.ppt

4. Processes and Processors in
Distributed Systems

 In most traditional OS, each process has an
address space and a single thread of
control.
 It is desirable to have multiple threads of
control sharing one address space but
running in quasi-parallel.

Introduction to threads
 Thread is a lightweighted process.
 The analogy: thread is to process as process is to
machine.
• Each thread runs strictly sequentially and has its
own program counter and stack to keep track of
where it is.
• Threads share the CPU just as processes do: first
one thread runs, then another does.
• Threads can create child threads and can block
waiting for system calls to complete.

 All threads have exactly the same address space.
They share code section, data section, and OS
resources (open files & signals). They share the
same global variables. One thread can read, write,
or even completely wipe out another thread’s
stack.
 Threads can be in any one of several states:
running, blocked, ready, or terminated.

 There is no protection between threads:
 (1) it is not necessary (2) it should not be
necessary: a process is always owned by a
single user, who has created multiple
threads so that they can cooperate, not
fight.

Thread usage
Mailbox
Request for
work arrives
Kernel
Shared
block
cache
File server process Dispatcher thread
Worker thread
Dispatcher/worker model
Team model
Pipeline model

Advantages of using threads
1. Useful for clients: if a client wants a file to be replicated
on multiple servers, it can have one thread talk to each
server.
2. Handle signals, such as interrupts from the keyboard.
Instead of letting the signal interrupt the process, one
thread is dedicated full time to waiting for signals.
3. Producer-consumer problems are easier to implement
using threads because threads can share a common
buffer.
4. It is possible for threads in a single address space to run
in parallel, on different CPUs.

Design Issues for Threads
Packages
 A set of primitives (e.g. library calls) available to
the user relating to threads is called a thread
package.
 Static thread: the choice of how many threads
there will be is made when the program is written
or when it is compiled. Each thread is allocated a
fixed stack. This approach is simple, but
inflexible.
 Dynamic thread: allow threads to be created and
destroyed on-the-fly during execution.

Mutex
 If multiple threads want to access the shared
buffer, a mutex is used. A mutex can be locked or
unlocked.
 Mutexes are like binary semaphores: 0 or 1.
 Lock: if a mutex is already locked, the thread will be blocked.
 Unlock: unlocks a mutex. If one or more threads are waiting on the
mutex, exactly one of them is released. The rest continue to wait.
 Trylock: if the mutex is locked, Trylock does not block the thread.
Instead, it returns a status code indicating failure.

Implementing a threads
package
 Implementing threads in user space
Runtime System
Kernel
Kernel space
User space
Thread0 5

Advantage
 User-level threads package can be implemented on an
operating system that does not support threads. For
example, the UNIX system.
 The threads run on top of a runtime system, which is a
collection of procedures that manage threads. The runtime
system does the thread switch. Store the old environment
and load the new one. It is much faster than trapping to
the kernel.
 User-level threads scale well. Kernel threads require some
table space and stack space in the kernel, which can be a
problem if there are a very large number of threads.

Disadvantage
 Blocking system calls are difficult to implement. Letting one thread
make a system call that will block the thread will stop all the threads.
 Page faults. If a thread causes a page faults, the kernel does not know
about the threads. It will block the entire process until the page has
been fetched, even though other threads might be runnable.
 If a thread starts running, no other thread in that process will ever run
unless the first thread voluntarily gives up the CPU.
 For the applications that are essentially CPU bound and rarely block,
there is no point of using threads. Because threads are most useful if
one thread is blocked, then another thread can be used.

Implementing threads in the
kernel
Kernel
Kernel space
User space
Thread0 5

 The kernel knows about and manages the threads.
No runtime system is needed. When a thread
wants to create a new thread or destroy an
existing thread, it makes a kernel call, which then
does the creation and destruction.
 To manage all the threads, the kernel has one
table per process with one entry per thread.
 When a thread blocks, the kernel can run either
another thread from the same process or a thread
from a different process.

Scheduler Activations
 Scheduler activations combine the advantage of
user threads (good performance) and kernel
threads.
 The goals of the scheduler activation are to mimic
the functionality of kernel threads, but with the
better performance and greater flexibility usually
associated with threads packages implemented in
user space.
 Efficiency is achieved by avoiding unnecessary
transitions between user and kernel space. If a
thread blocks, the user-space runtime system can
schedule a new one by itself.

 Disadvantage:
Upcall from the kernel to the runtime
system violates the structure in the layered
system.

System Models
 The workstation model:
the system consists of workstations
scattered throughout a building or campus
and connected by a high-speed LAN.
The systems in which workstations have
local disks are called diskful
workstations. Otherwise, diskless
workstations.

Why diskless workstation?
 If the workstations are diskless, the file system
must be implemented by one or more remote file
servers. Diskless workstations are cheaper.
 Ease of installing new release of program on
several servers than on hundreds of machines.
Backup and hardware maintenance is also
simpler.
 Diskless does not have fans and noises.
 Diskless provides symmetry and flexibility. You
can use any machine and access your files
because all the files are in the server.

 Advantage: low cost, easy hardware and
software maintenance, symmetry and
flexibility.
 Disadvantage: heavy network usage; file
servers may become bottlenecks.

Diskful workstations
 The disks in the diskful workstation are used in
one of the four ways:
 1. Paging and temporary files (temporary files generated by the compiler passes).

Advantage: reduces network load over diskless case
Disadvantage: higher cost due to large number of disks needed

 2. Paging, temporary files, and system binaries (binary executable programs such as
the compilers, text editors, and electronic mail handlers).

Advantage: reduces network load even more
Disadvantage: higher cost; additional complexity of updating the binaries

 3.Paging, temporary files, system binaries, and file caching (download the
file from the server and cache it in the local disk. Can make modifications
and write back. Problem is cache coherence).
Advantage: still lower network load; reduces load on file servers as well
Disadvantage: higher cost; cache consistency problems
4.Complete local file system (low network traffic but sharing is difficult).
Advantage: hardly any network load; eliminates need for file servers
Disadvantage: loss of transparency

Using Idle Workstation
 The earliest attempt to use idle
workstations is command:
 rsh machine command
 The first argument names a machine and
the second names a command to run.

Flaws
 1) User has to tell which machine to
use.
 2) The program executes in a different
environment than the local one.
 3) Maybe log in to an idle machine with
many processes.

What is an idle workstation?
 If no one has touched the keyboard or mouse for several
minutes and no user-initiated processes are running, the
workstation can be said to be idle.
 The algorithms used to locate idle workstations can be
divided into two categories:
 server driven--if a server is idle, it registers in registry
file or broadcasts to every machine.
 client driven --the client broadcasts a request asking for
the specific machine that it needs and wait for the reply.

A registry-based algorithm for
finding & using idle workstation
registrar
remote manager
Registry
1.Machine registers when it goes idle
2. Request idle
Workstation, get
reply
Home machine
List of idle workstation
4. Deregister
Idle workstation
7.Process runs
8. Process exits
3. Claim machine
9. Notify originator
5. Set up environment
6. Start process

How to run the process remotely?
 To start with, it needs the same view of the file
system, the same working directory, and the same
environment variables.
 Some system calls can be done remotely but
some can not. For example, read from keyboard
and write to the screen. Some must be done
remotely, such as the UNIX system calls SBRK
(adjust the size of the data segment), NICE (set
CPU scheduling priority), and PROFIL (enable
profiling of the program counter).

The processor pool model
 A processor pool is a rack full of CPUs in the
machine room, which can be dynamically
allocated to users on demand.
 Why processor pool?
 Input rate v, process rate u. mean response time T=1/(u-v).
 If there are n processors, each with input rate v and process rate u.
 If we put them together, input rate will be nv and process rate will be
nu. Mean response time will be T=1/(nu-nv)=(1/n)T.

A hybrid model
 A possible compromise is to provide each
user with a personal workstation and to
have a processor pool in addition.
 For the hybrid model, even if you can not
get any processor from the processor pool,
at least you have the workstation to do the
work.

Processor Allocation
 determine which process is assigned to which
processor. Also called load distribution.
 Two categories:
 Static load distribution-nonmigratory, once
allocated, can not move, no matter how
overloaded the machine is.
 Dynamic load distribution-migratory, can move
even if the execution started. But algorithm is
complex.

The goals of allocation
 1 Maximize CPU utilization
 2 Minimize mean response time/
Minimize response ratio
Response ratio-the amount of time it
takes to run a process on some machine,
divided by how long it would take on some
unloaded benchmark processor. E.g. a 1-
sec job that takes 5 sec. The ratio is 5/1.

Design issues for processor
allocation algorithms
  Deterministic versus heuristic algorithms
  Centralized versus distributed algorithms
  Optimal versus suboptimal algorithms
  Local versus global algorithms
  Sender-initiated versus receiver-initiated
algorithms

How to measure a processor is
overloaded or underloaded?
 1 Count the processes in the machine? Not accurate
because even the machine is idle there are some daemons
running.
 2 Count only the running or ready to run processes?
Not accurate because some daemons just wake up and
check to see if there is anything to run, after that, they go
to sleep. That puts a small load on the system.
 3 Check the fraction of time the CPU is busy using
time interrupts. Not accurate because when CPU is busy it
sometimes disable interrupts.

 How to deal with overhead?
A proper algorithm should take into account the CPU time, memory
usage, and network bandwidth consumed by the processor allocation
algorithm itself.
 How to calculate complexity?
If an algorithm performs a little better than others but requires much
complex implementation, better use the simple one.
 How to deal with stability?
Problems can arise if the state of the machine is not stable yet, still in
the process of updating.

Load distribution based on
precedence graph
2
1
4
4
2
1
1 1
2 2
T1
T2
T3 T4
T5
T1
T2
T3
T4
T5
Time
1
2
P1 P2

d d
T2 T3
T1
T1 T1
T2 T3
T1
T2
T3
T1
T2
T3
d

Two Optimal Scheduling
Algorithms
 The precedence graph is a tree
T1 T2 T3 T4
T5
T6
T7
T8
T9
T10 T11 T12
T13
1
2
3
4
5 T1 T2 T3
T4 T5 T7
T6 T9 T10
T8 T12
T11
T13

 There are only two processors
11 7
4
10
2
6
1 3
9
5
8
T9
T10 T11
T7 T8
T6
T4 T5
T1 T2 T3
T9 T10
T7 T8
T11 T6
T5 T4
T3 T2
T1

A graph-theoretic deterministic
algorithm
A B C D
E F
G H I
3
6
4
3
2
4
1
2
5
5
8
2 3
4
1
2
E F
H
4
3 1
2
1
2
A B C D
G I
8 5
5
4
2
Total network traffic: 2+4+3+4+2+8+5+2
=30
Total network traffic: 3+2+4+4+3+5+5+2
= 28

Dynamic Load Distribution
 Components of dynamic load distribution
• Initiation policy
• Transfer policy
• Selection policy
• Profitability policy
• Location policy
• Information policy

Dynamic load distribution
algorithms
 Load balancing algorithms can be
classified as follows:
• Global vs. Local
• Centralized vs. decentralized
• Noncooperative vs. cooperative
• Adaptive vs. nonadaptive

A centralized algorithm
 Up-down algorithm: a coordinator maintains a usage table with one
entry per personal workstation.
1. When a workstation owner is running processes on other people’s
machines, it accumulates penalty points, a fixed number per second.
These points are added to its usage table entry.
2. When it has unsatisfied requests pending, penalty points are
subtracted from its usage table entry.
 A positive score indicates that the workstation is a net user of system
resources, whereas a negative score means that it needs resources. A
zero score is neutral.
 When a processor becomes free, the pending request whose owner
has the lowest score wins.

A hierarchical algorithm
Deans
Dept. heads
Workers

A sender-initiated algorithm
LWM
HWM HWM
LWM
1. poll
2. transfer

A receiver-initiated algorithm
LWM
HWM HWM
LWM
1. poll
2. transfer

A bidding algorithm
 This acts like an economy. Processes want
CPU time. Processors give the price.
Processes pick up the process that can do
the work and at a reasonable price and
processors pick up the process that gives
the highest price.

Bidding algorithm
Requestor
overloaded
Candidate 1 Candidate n
1. bid
1. bid
2. response
2. response
3. transfer

 Iterative (also called nearest neighbor)
algorithm: rely on successive
approximation through load exchanging
among neighboring nodes to reach a global
load distribution.
 Direct algorithm: determine senders and
receivers first and then load exchanges
follow.

Direct algorithm
 the average system load is determined first.
Then it is broadcast to all the nodes in the
system and each node determines its status:
overloaded or underloaded. We can call an
overloaded node a peg and an underloaded
node a hole.
 the next step is to fill holes with pegs
preferably with minimum data movements.

Nearest neighbor algorithms:
diffusion
 Lu(t+1)=Lu(t)+v  A(u) (u,v (Lv(t)-Lu(t))+u(t))
 A(u) is the neighbor set of u.
0<=u,v<=1 is the diffusion parameter which
determines the amount of load exchanged
between two neighboring nodes u and v.
u(t)) is the new incoming load between t and t+1.

Nearest neighbor algorithm:
gradient
 One of the major issues is to define a
reasonable contour of gradients. The
following is one model. The propagated
pressure of a processor u, p(u), is defined
as
 If u is lightly loaded, p(u) = 0
 Otherwise, p(u) = 1 + min{p(v)|v є A(u)}

gradient
12 23
7
18
23
12 8
20
2
0
8
7
9
27
11 6
3 3
2
1
2
1 2
1
0
0
1
2
2
2
1 2
A node is lightly loaded if its load is < 3.

dimension exchange
12
8 1
4
6
4
0
8
4 5
2
5
2
6
6 6
3
3
4
5
5 5
4
4
5
7
5
6
4
5
5

dimension exchange extension

Fault tolerance
 component faults
  Transient faults: occur once and then disappear.
E.g. a bird flying through the beam of a microwave
transmitter may cause lost bits on some network. If retry,
may work.
  Intermittent faults: occurs, then vanishes, then
reappears, and so on. E.g. A loose contact on a connector.
  Permanent faults: continue to exist until the fault is
repaired. E.g. burnt-out chips, software bugs, and disk
head crashes.

System failures
 There are two types of processor faults:

 1 Fail-silent faults: a faulty processor
just stops and does not respond
 2 Byzantine faults: continue to run but
give wrong answers

Synchronous versus
Asynchronous systems
 Synchronous systems: a system that has the
property of always responding to a
message within a known finite bound if it
is working is said to be synchronous.
Otherwise, it is asynchronous.

Use of redundancy
 There are three kinds of fault tolerance
approaches:
 1 Information redundancy: extra bit to recover
from garbled bits.
 2 Time redundancy: do again
 3 Physical redundancy: add extra
components. There are two ways to organize
extra physical equipment: active replication (use
the components at the same time) and primary
backup (use the backup if one fails).

Fault Tolerance using active
replication
A B C
A3
A2
A1
B3
B2
B1
C3
C2
C1
V1
V2
V3
V4
V5
V6
V7
V8
V9
voter

How much replication is needed?
 A system is said to be k fault tolerant if it can
survive faults in k components and still meet its
specifications.
 K+1 processors can fault tolerant k fail-stop
faults. If k of them fail, the one left can work. But
need 2k+1 to tolerate k Byzantine faults because
if k processors send out wrong replies, but there
are still k+1 processors giving the correct answer.
By majority vote, a correct answer can still be
obtained.

Fault Tolerance using primary
backup
Client Backup
Primary
1. Request
2. Do work 3. Update
4. Do work
5. Ack
6. Reply

Handling of Processor Faults
 Backward recovery – checkpoints.
 In the checkpointing method, two undesirable
situations can occur:
 Lost message. The state of process Pi indicates that it has
sent a message m to process Pj. Pj has no record of
receiving this message.
 Orphan message. The state of process Pj is such that it
has received a message m from the process Pi but the state
of the process Pi is such that it has never sent the message
m to Pj.

 A strongly consistent set of checkpoints
consist of a set of local checkpoints such
that there is no orphan or lost message.
 A consistent set of checkpoints consists of
a set of local checkpoints such that there is
no orphan message.

Orphan message
Pi
Pj
m
failure
Current checkpoint
Current checkpoint

Domino effect
Pj
Pi
failure
Current checkpoint

Synchronous checkpointing
 a processor Pi needs to take a checkpoint
only if there is another process Pj that has
taken a checkpoint that includes the receipt
of a message from Pi and Pi has not
recorded the sending of this message.
 In this way no orphan message will be
generated.

Asynchronous checkpointing
 Each process takes its checkpoints
independently without any coordination.

Hybrid checkpointing
 Synchronous checkpoints are established in
a longer period while asynchronous
checkpoints are used in a shorter period.
That is, within a synchronous period there
are several asynchronous periods.

Agreement in Faulty Systems
 two-army problem
 Two blue armies must reach agreement to attack a
red army. If one blue army attacks by itself it will
be slaughtered. They can only communicate using
an unreliable channel: sending a messenger who
is subject to capture by the red army.
 They can never reach an agreement on attacking.

 Now assume the communication is perfect
but the processors are not. The classical
problem is called the Byzantine generals
problem. N generals and M of them are
traitors. Can they reach an agreement?

Lamport’s algorithm
1
4
3
2
1
1
1
2
2
2
x
y
z
4
4
4
N = 4
M = 1

 After the first round
1 got (1,2,x,4); 2 got (1,2,y,4);
3 got (1,2,3,4); 4 got (1,2,z,4)
 After the second round
1 got (1,2,y,4), (a,b,c,d), (1,2,z,4)
2 got (1,2,x,4), (e,f,g,h), (1,2,z,4)
4 got (1,2,x,4), (1,2,y,4), (i,j,k,l)
 Majority
1 got (1,2,_,4); 2 got (1,2,_,4); 4 got (1,2,_,4)
 So all the good generals know that 3 is the bad
guy.

Result
 If there are m faulty processors, agreement
can be achieved only if 2m+1 correct
processors are present, for a total of 3m+1.
 Suppose n=3, m=1. Agreement cannot be
reached.

1
3
2
1
2
1
x 2
y
After the first round
1 got (1,2,x); 2 got (1,2,y); 3 got (1,2,3)
After the second round
1 got (1,2,y), (a,b,c)
2 got (1,2,x), (d,e,f)
No majority. Cannot reach an agreement.

Agreement under different
models
 Turek and Shasha considered the following
parameters for the agreement problem.
1. The system can be synchronous (A=1) or asynchronous (A=0).
2. Communication delay can be either bounded (B=1) or unbounded
(B=0).
3. Messages can be either ordered (C=1) or unordered (C=0).
4. The transmission mechanism can be either point-to-point (D=0) or
broadcast (D=1).

A Karnaugh map for the
agreement problem
00 01 11 10
00 0 0 1 0
01 0 0 1 0
11 1 1 1 1
10 0 0 1 1
CD
AB

 Minimizing the Boolean function we have the
following expression for the conditions under
which consensus is possible:
AB+AC+CD = True
 (AB=1): Processors are synchronous and
communication delay is bounded.
 (AC=1): Processors are synchronous and
messages are ordered.
 (CD=1): Messages are ordered and the
transmission mechanism is broadcast.

REAL-TIME DISTRIBUTED
SYSTEMS
 What is a real-time system?
 Real-time programs interact with the
external world in a way that involves time.
When a stimulus appears, the system must
respond to it in a certain way and before a
certain deadline. E.g. automated factories,
telephone switches, robots, automatic stock
trading system.

Distributed real-time systems
structure
Dev
C
Dev
C
C
Dev
C
Dev
C
External device
Sensor
Computer
Actuator

Stimulus
 An external device generates a stimulus for the
computer, which must perform certain actions
before a deadline.
1. Periodic: a stimulus occurring regularly every T seconds, such as a
computer in a TV set or VCR getting a new frame every 1/60 of a
second.
2. Aperiodic: stimulus that are recurrent, but not regular, as in the
arrival of an aircraft in an air traffic controller’s air space.
3. Sporadic: stimulus that are unexpected, such as a device overheating.

Two types of RTS
 Soft real-time systems: missing an
occasional deadline is all right.
 Hard real-time systems: even a single
missed deadline in a hard real-time system
is unacceptable, as this might lead to loss
of life or an environmental catastrophe.

Design issues
 Clock Synchronization - Keep the clocks
in synchrony is a key issue.
 Event-Triggered versus Time-Triggered
Systems
 Predictability
 Fault Tolerance
 Language Support

Event-triggered real-time
system
 when a significant event in the outside world
happens, it is detected by some sensor, which
then causes the attached CPU to get an interrupt.
Event-triggered systems are thus interrupt driven.
Most real-time systems work this way.
 Disadvantage: they can fail under conditions of
heavy load, that is, when many events are
happening at once. This event shower may
overwhelm the computing system and bring it
down, potentially causing problems seriously.

Time-triggered real-time
system
 in this kind of system, a clock interrupt occurs
every T milliseconds. At each clock tick sensors
are sampled and actuators are driven. No
interrupts occur other than clock ticks.
 T must be chosen carefully. If it too small, too
many clock interrupts. If it is too large, serious
events may not be noticed until it is too late.

An example to show the
difference between the two
 Consider an elevator controller in a 100-story
building. Suppose that the elevator is sitting on
the 60th floor. If someone pushes the call button
on the first floor, and then someone else pushes
the call button on the 100th floor. In an event-
triggered system, the elevator will go down to
first floor and then to 100th floor. But in a time-
triggered system, if both calls fall within one
sampling period, the controller will have to make
a decision whether to go up or go down, for
example, using the nearest-customer-first rule.

 In summary, event-triggered designs give
faster response at low load but more
overhead and chance of failure at high
load. Time-trigger designs have the
opposite properties and are furthermore
only suitable in a relatively static
environment in which a great deal is known
about system behavior in advance.

Predictability
 One of the most important properties of
any real-time system is that its behavior be
predictable. Ideally, it should be clear at
design time that the system can meet all of
its deadlines, even at peak load. It is known
when event E is detected, the order of
processes running and the worst-case
behavior of these processes.

Fault Tolerance
 Many real-time systems control safety-critical devices in
vehicles, hospitals, and power plants, so fault tolerance is
frequently an issue.
 Primary-backup schemes are less popular because
deadlines may be missed during cutover after the primary
fails.
 In a safety-critical system, it is especially important that
the system be able to handle the worst-case scenario. It is
not enough to say that the probability of three components
failing at once is so low that it can be ignored. Fault-
tolerant real-time systems must be able to cope with the
maximum number of faults and the maximum load at the
same time.

Language Support
 In such a language, it should be easy to express the work as a
collection of short tasks that can be scheduled independently.
 The language should be designed so that the maximum execution
time of every task can be computed at compile time. This requirement
means that the language cannot support general while loops and
recursions.
 The language needs a way to deal with time itself.
 The language should have a way to express minimum and maximum
delays.
 There should be a way to express what to do if an expected event
does not occur within a certain interval.
 Because periodic events play an important role, it would be useful to
have a statement of the form: every (25 msec){…} that causes the
statements within the curly brackets to be executed every 25 msec.

Real-Time Communication
 Cannot use Ethernet because it is not predictable.
 Token ring LAN is predictable. Bounded by kn byte
times. K is the machine number. N is a n-byte message .
 An alternative to a token ring is the TDMA (Time
Division Multiple Access) protocol. Here traffic is
organized in fixed-size frames, each of which contains n
slots. Each slot is assigned to one processor, which may
use it to transmit a packet when its time comes. In this
way collisions are avoided, the delay is bounded, and each
processor gets a guaranteed fraction of the bandwidth.

Real-Time Scheduling
 Hard real time versus soft real time
 Preemptive versus nonpreemptive
scheduling
 Dynamic versus static
 Centralized versus decentralized

Dynamic Scheduling
 1. Rate monotonic algorithm:
 It works like this: in advance, each task is
assigned a priority equal to its execution
frequency. For example, a task runs every 20
msec is assigned priority 50 and a task run every
100 msec is assigned priority 10. At run time, the
scheduler always selects the highest priority task
to run, preempting the current task if need be.

 2.Earliest deadline first algorithm:
 Whenever an event is detected, the
scheduler adds it to the list of waiting tasks.
This list is always keep sorted by deadline,
closest deadline first.

 3.Least laxity algorithm:
 this algorithm first computes for each task
the amount of time it has to spare, called
the laxity. For a task that must finish in 200
msec but has another 150 msec to run, the
laxity is 50 msec. This algorithm chooses
the task with the least laxity, that is, the one
with the least breathing room.

Static Scheduling
 The goal is to find an assignment of tasks
to processors and for each processor, a
static schedule giving the order in which
the tasks are to be run.

A comparison of Dynamic
versus Static Scheduling
 Static is good for time-triggered design.
 1. It must be carefully planned in advance,
with considerable effort going into choosing the
various parameters.
 2. In a hard real-time system, wasting
resources is often the price that must be paid to
guarantee that all deadlines will be met.
 3. An optimal or nearly optimal schedule can
be derived in advance.

 Dynamic is good for event-triggered
design.
 1. It does not require as much advance
work, since scheduling decisions are made
on-the-fly, during execution.
 2. It can make better use of resources
than static scheduling.
 3. No time to find the best schedule.

4.Process.ppt

More Related Content

Similar to 4.Process.ppt (20)

Recently uploaded (20)

4.Process.ppt