720 p new spy pen camera user guide

720P HD Camcorder Manual
(Ball-point pen Type)

Remark: This picture only for reference

1、 Introduction
Thanks for purchasing this product. It is equipped with various practical functions integrating digital
photography, video recorder and audio recorder function, with fashionable and dainty appearance, stable and
outstanding quality, wide and diversified purposes. It will bring you the new and memorable experiences of
use and is the indispensable tool for you.
The functions of this machine include high definition, video recording, high definition photography, quality
audio record, PC camera。
The characteristics of this machine include various functions, various purpose, fashionable appearance,
outstanding video recording effect, handy and portable, easy use, stability, reliability and rapid response, etc.
This machine is applicable for the purposes of reporter interview, wonderful snap shoot, emergency record,
living fragment record, recreation record, sports record, aided teaching record, family security monitoring,
criminal investigation and evidence-collecting for legal purpose, landscape record during travel, outdoors
exploration record and backing memory, etc.

2、 Product Profile

NO Name Description
1 Operation key It’s a multi-functional key with different functions in
different modes and states, including power-on, power-
off, start to record video, stop recording video, take
photos, start to record audio and stop recording audio.
2 Camera Used to catch image signals
3 Mic Used to catch the audio signals
4 Indicator lamps There are three built-in red, green and blue indicator
lamps, three lamps in three colors may indicate the
different operating states of products in different
combination modes.
5 Mode Switch “①” Reset
“②” Video
“③”Picture, Audio

6 Standard 4 Pin USB The interface for connecting the data line and power
cord
7 Camera hidden switch According to the direction of arrow indicator to push,
camera for hidden or open

3、 Usage
1.Startup and Power-off：
1.1 Startup
a. Keep the Mode Switch in ②, Press OPERATION KEY (part 1) for 1second and then release it.
b. The power of product is turned on, the GREEN and RED lamp will turn on and the product will enter into
the initialization status.
c. The GREEN lamp will turn off when the initialization is completed.
d. After startup, the device will enter into the default recording function standby status and the RED lamp will
turn on.
e. Startup is completed.

Note: The startup of this machine is similar to that of computer with a startup course, never make any
operation during this course till the startup is completed. The time duration of startup initialization depends on
the capacity of memory.

1.2 Power-off
a. Press OPERATION KEY (part 1) for 4 seconds and then release it.
b. The status indicator lamps will turn off to complete power-off.

Note: If the product is working when you turn off it, The system will automatically save the files being recorded
at present and power off.

2 、 Video Record
a. It will enter into the default video record mode after startup or switch over to ② record mode by the mode
key.
b. The RED light will keep on when the device is in standby status of this mode.
c ． Press the OPERATION KEY shortly to start the video record and the RED lamp will turn from constantly
ON status to even and slow flicker status.
d ． Press OPERATION KEY shortly again to stop video recording and save the file being recorded, the RED
light will turn from flicker status to constantly ON status.

Note: To guarantee the size and safety of photography files, the system will automatically save the file once
every 30 minutes and continue to record video. Please make sure the camera not being blocked with
sufficient illumination, keep the product body vertical and stable, with over 50cm distance with the objects to
be recorded to get the images with right direction, natural colors, clear images and stable images. Never
block the microphone sound gate to ensure the sound recording effect.

3、 Take Pictures
a. Switch over the device to ③ mode.
b. The GREEN light will keep on when the device is in standby status of this mode.
c. It will take one picture and the GREEN light will flicker once every time the OPERATION KEY is pressed
shortly.

every 30 minutes and continue to record video. Please make sure the camera not being blocked with
sufficient illumination, keep the product body vertical and stable, with over 50cm distance with the objects to

be recorded to get the images with right direction, natural colors, clear images and stable images.

4、 Audio Record
a ． Switch over the device to ③ record mode.
b ． The BLUE light will keep on when the device is in standby status of this mode.
c ． Press the OPERATION KEY 2 seconds to start the audio record and the BLUE lamp will turn from
constantly ON status to even and slow flicker status.
d．Press OPERATION KEY shortly again to stop audio recording and save the file being recorded, the BLUE
light will turn from flicker status to constantly ON status.

every 60 minutes and continue to record audio. Never block the microphone sound gate to ensure the sound
recording effect.
5、 PC Camera
When the unit is in this mode, you can chat with your friends on line with web camera, or hold the net-
conference with your co-workers of company; or you can apply the novel and interesting purposes like
shooting posters, etc. via the Windows programs provided by any third party. The method of entering into
computer web camera mode is shown as below.
a. Keep the Mode Switch in ② ， startup
b. Enter the PC Camera mode, Open MY COMPUTER, the icon of web cam will appear on the screen to
indicate that the web cam function of product is started up normally.

Note: Not always that the computer can detect web cam function due to the computer configuration or the
system differences. If the product cannot enter into web cam mode, but into the movable disk mode
occasionally, please remove this unit, start up this unit and re-connect it to the computer. If you just use the
computer web cam function of this machine on your computer for the first time, please install the web cam
driver attached to the floppy disk or provided by the distributor; to prevent this product from being damaged,
please connect one end of data line to the computer before connecting it to the computer, connect the other
end of data line to the computer. Temporarily, the computer web cam function of this unit can only support
WINDOWS operating system.

6、 Movable disk
This unit may be used as a movable disk, with the method of usage shown as below.
a. Connect the device to the computer with USB data cable, the movable disk icon will pop up in the computer
in OFF status.
b. The directory for saving video file is *Disk DCIM100DSCIM.
c. To dismantle the device, please click the movable device management icon at the right lower corner to
remove this movable memory device and after the computer has confirmed to disconnect the hardware
safety, disconnect the device and computer.

Note: The time for computer to identify the movable disk is relative to the computer configuration, operating
system and memory capacity, please wait patiently during this course and never operate the unit, which may
affect the hardware identification. If the movable disk cannot be recognized for a long time, please try to re-
connect; if it is not recognized yet, please confirm if your operating system, motherboard driver, USB port and
connection line can work normally.

7、 Setup time
The video recorder provides the function to display the video record time in video file, you can set the
time and the time display or not according to actual needs; the time display format: "year. month. Day Hours:
minutes: seconds" , setup times are as follows:
a. Turn off the camera—>to connect the computer—> open the removable disk—> click the right mouse
button on blank space of the root directory of the device —>move the cursor on "New" option of the pop-up
menu —> select "Text Document"—> named "time" to the text document, need to pay attention to its
extension name is ". txt" —> completion of setting up time file; you can set up in accordance with the above
steps on your desktop, other disk partition, under the other folder and then copy to a removable disk root
directory.
b. Open the "time" text document, input the time settings string, the string is composed of "year. Month Day
hours. minutes. seconds show/hide flag" ,set-up times are as follows:
With time shows: 2009.01.01 12.01.01
Do not show time: 2009.01.01 12.01.01
The above time string are the time you want to set, attention to the space between year Month day and Hours
minutes seconds, the "Y" and "N" is a flag of time display, "Y" means show the time string on the right corner
of the video; "N "mean hide the time string.
c. The file of set-up time has been copied to the root directory, uninstall hardware, boot, complete set-up time.

d. The time set up will be saved to the camera inside.

8 、 Charge
Connect the product to the power adaptor or computer to charge it. The RED light will flicker slowly when the
battery is being charged and will keep on when the battery is charged completely.

Note: This unit is built in with high capacity polymer lithium battery without memory effect, which may be
charged during use. But for the first five times of use, please run out the battery power and then charge to the
full to activate the highest capacity of battery and obtain the standard working hours; to maximize the battery
power storage capacity, please continue to charge for 30 minutes to 1 hour when the indicator lamp indicates

the full charging status upon charging every time. Please make sure that the power supply complies with the
standard USB power supply specifications.

9 、 FAQs
a. Q: Why the indicator lamp does not respond after I have pressed the startup key on my device for a long
time?
A: Please check if the device power is run out and it’s recommended to connect the power adaptor,
computer or standby power source to charge the product, then try if it may be powered on normally.
b. Q: Why the RED, BLUE lights on my product will flicker rapidly and simultaneously and then the product
will automatically power off 10 seconds later?
A: When it happens during operation, it indicates that the memory space runs out, the device will
automatically save the file being recorded at present and it indicates the auto power-off around 10 seconds. If
you shall continue to record video files, please delete the files you don’t need again from the computer.
c. Q: What shall I do if my product cannot respond for more than 2 minutes and no keypad can respond?
A: You need reset the device. Please take the Mode Switch from ② to ①

4、 Parameters

Item Parameters
Video format AVI
Video encoding M-JPEG
Video resolution 1280*720
Media playing Attached software of the operating system or Mainstream audio and
software video media playing software, recommend Kmplayer
Picture format JPG
Supporting system Windows me/2000/xp/2003/vista, Mac OS10.4 (uncertainty, depends
on the computer model)
charge pressure DC-5V
Interface type 4 Pin USB
Battery type high-capacity lithium polymer

5、 Warning
●Application: Please strictly abide relevant regulations and laws. This product should not be used for any
illegal purposes. The user is fully responsible for its using purpose.
●Battery: If do not use this recording function after long time, please charged it fully before using.
●File security: This product is not a professional storage device. It does not guarantee the integrity and
security of saved files. Please back up your important documents on the computer or other storage
device timely
●Video quality: This product is not a professional video recording device. It Does not guarantee the effect
of the video file to have the professional quality

●Operating temperature: 0—40°C. For the extension of life, it is best used at room temperature.
●Shooting brightness: Do not expose the camera directly to strong light, such as the sun light, to avoid
damage to optical devices.
●Cleaning: Do not use it under the environment with high dust density to avoid the contamination of
camera lens or other components.

720 p new spy pen camera user guide

More Related Content

Similar to 720 p new spy pen camera user guide (20)

More from george david (20)

Recently uploaded (20)

720 p new spy pen camera user guide