A decision making support of the most efficient steaming speed for the liner business industry

European Journal of Business and Management www.iiste.org
ISSN 2222-1905 (Paper) ISSN 2222-2839 (Online)
Vol 4, No.18, 2012

A DECISION MAKING SUPPORT OF THE MOST EFFICIENT
STEAMING SPEED FOR THE LINER BUSINESS INDUSTRY
N.S.F. ABDUL RAHMAN (Corresponding author)
Department of Maritime Management, Faculty of Maritime Studies and Marine Science
Universiti Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia.
Tel: +609-6684252 E-mail: nsfitri@umt.edu.my

The research is financed by the Ministry of Higher Education, Malaysia and Universiti Malaysia Terengganu.

Abstract
Due to the global economic recession, the global financial crisis, the increase of the bunker fuel prices and the issue
of global climate change, many shipping companies suffered operating their vessels especially for the long-haul
business services, such as the Asia-Europe trade. These global factors influence not only the movement of container
volumes, but the ship expenditure costs and revenues are also affected. Selection of the most efficient steaming speed
of containerships is an alternative solution for assisting shipping companies in planning a proactive business strategy
and reducing the ship expenditure costs. There are four different levels of steaming speed in the liner shipping sector.
Shipping companies need to make a decision as to which one of them will be the most efficient steaming speed
considering the elements of technical, financial, environmental and commercial aspects. A combination method
called FTOPSIS (Fuzzy-TOPSIS) method is presented in this paper. Such a method is capable of helping shipping
companies in the decision making process of the liner business industry. Extra slow steaming is classified as the most
efficient steaming speed.
Keywords: FTOPSIS; Shipping Business; Decision Making Process; Vessel Speed.

1. Introduction
The container shipping industry is one of the popular maritime businesses because it can carry a large volume of
containers at a cheaper price compared to other transport modes. Therefore, it becomes the most preferred mode of
transport among importers and exporters for doing business especially for the international trades. A number of
global factors that occurred together in the past periods, such as 1) the global economic recession, 2) the financial
crisis, 3) the sharp increase of bunker fuel prices and 3) the issue of global climate change have created huge impacts
to the liner business industry. Due to the uncertainty of the global conditions, selection of the most efficient steaming
speed of liner vessels for a specific service loop is one of the most important decisions shipping lines has to make in
order to reduce the vessels’ expenditure costs together with providing a good service performance to customers. The
implementation of different levels of steaming speed will automatically influence the financial performance of
shipping companies with other elements, such as the total days of journey time and the total number of vessels
deployed. The motivation of this paper is to analyse and determine the most efficient steaming speed of liner
business industry in terms of service performance, technical, commercial and also cost saving perspectives. A
combination method between a fuzzy set theory and a technique for order preference by similarity to ideal solution
(TOPSIS) method is applied in this study. To retrieve the feasibility of the scientific method developed, a test case
that related to the current situation is studied as an applicable case of interest.

2. Literature Review
The world’s gross domestic products (GDP) decreased by 2.2% in 2009, while trade dropped by 14.4% as traders and
factories used up their inventories in the same year (World Bank, 2010). 2009 was the worst global economic
recession in over seven decades and the sharpest decline in the volume of global merchandise trade (UNCTAD,
37

Vol 4, No.18, 2012

2010). Together with the collapse in economic growth and trade, international seaborne trade volumes contracted by
4.5% in 2009 (UNCTAD, 2010). Due to that, the world's largest containership is travelling at lower speeds today
than sailing clippers such as the Cutty Sark did more than 130 years ago (Vidal, 2010). The strategy of changing the
steaming speed helps shipping companies to reduce ship expenditure costs by consuming low bunker fuel
consumption. Also, the implementation of different levels of steaming speed gives huge impacts to the total days of
journey time, the total bunker fuel cost, the total number of vessels deployed and also the operational and voyage
costs. In the shipping and shipbuilding markets report 2011 prepared by CAP-MARINE (2011) mentioned that there
are four different levels of steaming speed for commercial containerships which are full steaming speed, slow
steaming speed, extra slow steaming speed and super slow steaming speed. Full steaming speed is considered as the
maximum speed for commercial containerships that has been designed by its engine manufacturer. Usually, the range
of this speed is between 23 and 25 knots. Slow steaming speed refers to the speed lower than the maximum and it is
approximately from 20 to 22 knots. Shipping companies which operate their vessels between 17 and 19 knots are
considered as implementing extra slow steaming speed. However, if the vessel speed used is less than extra slow
steaming speed, it is categorised as super slow steaming speed which is approximately from 14 to 16 knots.
Such steaming speeds have been introduced to the shipping industry in different periods of time. Slow steaming
speed has been implemented in the liner shipping markets since the second half of 2008 (Cariou, 2010). According to
the Edlogistics’s website, extra slow steaming has gathered pace for liner operators since fuel prices reached over
$350 per metric tonne in May 2009. Afterwards an announcement by COSCO’s CEO, Mr Wei (SEATRADE, 2010),
the alliance which also includes “K” Line, Yang Ming and Hanjing stated that they had adopted super slow steaming
from November 2009. Before the global economic recession, the financial crisis and the increase of the bunker fuel
prices occurred in the middle of 2008, many shipping companies enjoyed operating their ships at full steaming speed.

3. Methodology
TOPSIS method is a method to solve the Multi-Criteria Decision Making (MCDM) problems which was first
developed by Hwang and Yoon in 1981 (Balli and Korukoglu, 2009; Hung and Chen, 2009; Jahanshahloo et al.,
2006; Mohammad et al., 2010; Olson, 2004; Tsai et al., 2008; Wu and Olson, 2006). Such a method is a practical and
useful technique for ranking and selecting a number of alternatives through distance separation measures (Shih et al.,
2007). By using this method, it helps decision makers organise problems that need to be solved and then conduct the
analysis comparisons. Finally, all alternatives will be ranked based on the preference order. The primary concept of
the TOPSIS method is the most preferred alternative will be chosen based on not only have the shortest distance
from the positive ideal solution (PIS), but also have the farthest distance from the negative ideal solution (NIS) or
nadir (Balli and Korukoglu, 2009; Hung and Chen, 2009; Jahanshahloo et al., 2006; Mohammad et al., 2010; Tsai et
al., 2008; Wu and Olson, 2006).
The TOPSIS method provides a number of attributes or criteria in a systematic way (Wu and Olson, 2006). Moreover,
the advantages of the TOPSIS method are 1) ability to identify the best alternative quickly (Olson, 2004), 2) simple
and rationally comprehensive concept, 3) good computational efficiency, 4) ability to measure the relative
performance of each alternative in a simple mathematical form (Hung and Chen, 2009; Mohammad et al., 2010; Yeh,
2002), 5) large flexibility in the definition of the choice set (Mohammad et al., 2010), 6) a sound logic that represents
the rationale of human choice and 7) a simple computational process that can be easily programmed into a
spreadsheet (Shih et al., 2007). Such advantages make this technique as a relevant method to be used in this paper.
According to Jahanshahloo et al., (2006), the TOPSIS method can be concisely expressed in a matrix format as
follows:

38

Vol 4, No.18, 2012

Table 1: A decision matrix form in TOPSIS method

where are the possible alternatives that shipping companies can choose; are the
possible evaluation criteria or attributes against which an alternative performance is measured; is a set of values
indicating the performance rating of each alternative with respect to each criterion (Mahmoodzadeh et al.,
2007). The proposed TOPSIS method procedure is defined as follows:

Step 1: Calculate the weight of the evaluation criteria
To determine the relative weight of each criterion, the fuzzy set theory and pair-wise comparison techniques are used.
To conduct the pair-wise comparison matrix, firstly, it is necessary to set up criteria in the row and column of a
matrix. Then, the pair-wise comparison is performed to all the criteria by applying a ratio scale assessment.
The assessment scale is shown in Table 2.

Table 2: The ratio scale of pair-wise comparison
Numerical Numerical
Linguistic meaning Linguistic meaning
Assessment Assessment
1 Equally important 1 Equally important
3 A little important 1/3 A little unimportant
5 Important 1/5 Unimportant
7 Very important 1/7 Very unimportant
9 Extremely important 1/9 Extremely unimportant
Intermediate values of 1/2, 1/4, 1/6, Intermediate values of
2, 4, 6, 8
important 1/8 unimportant

Such a table contains two parts which describe the numerical assessment together with the linguistic meaning of each
number. The first part is on the left hand side of the table explains “IMPORTANT”, while the right hand side is the
second part describes “UNIMPORTANT” (Aghajani et al., 2008; Wu 2007). For a matrix of order ,
( comparisons are required. The weighting vector of such a matrix can be computed using the
geometric mean technique in association with the fuzzy set algorithm as follows:

39

Vol 4, No.18, 2012

(Eq. 1)

presents the lower bound (l), median (m) and upper bound (u) values of .

(Eq. 2)

where is the geometric mean of the jth row in the fuzzy pair-wise comparison matrix and is the fuzzy

weight vector of the jth attribute. The defuzzification technique is applied in order to convert a triangular fuzzy
weight value into the corresponding crisp weight value. The defuzzification approach (Mikhailov, 2004) is defined as
follows:

(Eq. 3)

where is the defuzzified mean value of a fuzzy weight factor. The weighting vector value of attribute j

can then be calculated using Eq. 4.

(Eq. 4)

Step 2: Construct the normalised decision matrix,
To convert the various attributes dimensions into non-dimensional attributes, Eq. 5 is applied. This is a useful tool to
help decision makers to make a choice between complex alternatives with respect to all criteria.

(Eq. 5)

Step 3: Calculate the weighted normalised decision matrix,
The weighted normalised decision matrix is obtained by multiplying the weights of all the criteria in Step 1 with the
normalised decision matrix in Step 2 (Eq. 6). Once all the weights of criteria have been determined, this process

40

Vol 4, No.18, 2012

helps to sort them in their relative priority.

(Eq. 6)
where represents the weight of the attribute or criterion (Mahmoodzadeh et al., 2007; Yoon and Hwang,
1995).

Step 4: Determine the positive ideal solution (PIS), and negative ideal solution (NIS),
According to Yoon and Hwang (1995), an ideal solution is defined as a collection of ideal levels (or ratings) in all
criteria considered. It is to be as close as possible to such an ideal solution based on the rationale of human choice.
PIS and NIS are determined respectively as follows:

(Eq. 7)

(Eq. 8)
where is associated with the benefit criteria and is associated with the cost criteria (Mahmoodzadeh et al.,
2007).

Step 5: Calculate the distance separation measure for PIS, and NIS,
Distance separation is considered as a degree or amount of separation between two points of the study. All the
alternatives with their PIS and NIS can be measured using the Euclidean distance technique as shown in Eqs. 9 and
10.

(Eq. 9)

(Eq. 10)
The detailed information of the Euclidean distance technique can be referred to such literatures as Dattorro (2001),
Gower (1982) and Gutierrez and Garcia-Palomares (2008).

Step 6: Calculate the relative closeness to the ideal solution,
A closeness coefficient is defined to determine the ranking order of all alternatives once the and of each
alternative has been calculated. The relative closeness ( ) to the ideal solution can be computed using Eq. 11
as follows:

(Eq. 11)
41

Vol 4, No.18, 2012

Step 7: Rank the preference order of alternatives
Based on the relative closeness to the ideal solution in Step 6, the larger is the value; the better is the
performance of the alternative (Devi et al., 2009; Mahmoodzadeh et al., 2007).

4. Selection Of The Most Efficient Steaming Speed For The Liner Business Industry
A test case is created based on the current situation faced by shipping companies. Firstly, it starts with identifying the
issue faced by shipping companies and sets up a goal that needs to be achieved. Secondly, the main body of the test
case contains of 1) identifying criteria, 2) identifying alternatives, 3) a model development process and 4) data
collection process of all the criteria and sub-criteria. Finally, it concludes with 1) performing the weighting vector
calculation process using a fuzzy set theory and 2) ranking the preference order of all the alternatives using the
TOPSIS method.
4.1 Identify the problem matter and determine a goal
The discussion technique with the selected experts has been used to determine an appropriate goal that needs to be
achieved based on the current situation faced by many shipping companies regarding the steaming speed. Such
experts are selected based on their experiences of about 10 to 20 years in the shipping industry including knowledge,
skills and also ability to judge on certain issues that are closely related to the container shipping sector. Due to the
global factors described in Section 1, all players in the liner business industry looked for a new formula on how to
reduce bunker fuel costs and gas emissions by adjusting the vessel speed as part of a business strategy. Therefore, the
goal of this paper is to select the most efficient steaming speed of the liner business industry when dealing with
uncertainties in the global situations.
4.2 Identify the evaluation criteria and sub-criteria
A discussion technique with the selected experts has been used in this study for identifying the evaluation criteria and
sub-criteria. The main criteria can be grouped into four categories which are 1) Technical and Operational Aspect
(TOA), 2) Financial Aspect (FA), 3) Environmental Aspect (EA) and 4) Commercial and Trade Aspect (CTA). Each
group of criteria has its associated sub-criteria as listed in Table 3. All the criteria and sub-criteria will assist the
FTOPSIS method to achieve the goal described in Section 4.1. In this paper, there are two possible goals for each
sub-criterion which are either “Benefit” or “Cost” goal. The goal “Benefit” is related to a positive solution, while the
goal “Cost” is associated with a negative solution in determining the PIS and NIS.
Table 3: The list of criteria and sub-criteria associated with the goal
Level 1 (Main Criteria) Level 2 (Sub-criteria) Goal
Maintenance Cost (MC) Cost
Technical and Operational Aspect Auxiliary Consumption (AC) Cost
(TOA) Propulsion Power (PP) Benefit
Service Performance (SP) Benefit
Bunker Fuel Cost (BFC) Cost
Operational Cost excluded MC (OC) Cost
Financial Aspect (FA)
Additional Vessel Cost (AVC) Cost
Ship Revenue (SR) Benefit
Carbon Dioxide (CO2) Cost
Environmental Aspect (EA) Nitrogen Dioxide (NOx) Cost
Sulphur Dioxide (SOx) Cost
Commercial and Trade Aspect (CTA) Journey Time (JT) Cost

42

Vol 4, No.18, 2012

4.3 Identify the possible alternatives solution
As described in Section 2, there are four different levels of steaming speed. All of them have to be considered for
assisting shipping companies in the decision making process for reducing the ship’s expenditure costs, while
providing an excellent service performance to customers.
4.4 Data collection process
Quantitative and qualitative data collections are involved in this process. The quantitative data of three sub-criteria
are obtained using published mathematical algorithms which are 1) journey time (Notteboom and Vernimmen, 2009),
2) bunker fuel cost (Magelssen, 2010) and 3) carbon dioxide (Corbett, Wang and Winebrake, 2009). The propulsion
power data of the selected containership is obtained from Man B&W (2010), while the ship’s operational cost data is
obtained from the Institute of Chartered Shipbrokers (2009). The qualitative data of MC, AC, SP, AVC, SR, NOx and
SOx are obtained from the selected experts, who are originally from a shipping background, by using a set of
questionnaires consisting of a rating scale ranging from 1 to 10. All the feedbacks received from them are calculated
using Eq. 12 for determining the average rating value.

(Eq. 12)

All the quantitative and qualitative data are aggregated in Table 4 with respect to all the alternatives.

Table 4: The data of all the evaluation criteria
PP BFC CO2
OC ($) JT
MC AC (kW) SP ($) AVC SR (kg) NOX SOX
(‘000) (days)
(×103) (‘000) (×103)
FS 2.67 8.33 65.53 9.67 4,363 1,482 0.00 6.00 39.87 10.00 10.00 56.00
SS 3.67 7.00 59.96 7.00 3,379 1,630 4.33 6.00 23.17 7.67 7.67 61.33
ESS 4.67 5.00 51.40 4.67 2,520 1,826 7.00 6.33 13.23 5.67 5.67 68.35
SSS 6.33 3.00 44.54 3.33 1,787 2,094 10.00 6.67 7.77 4.00 4.00 77.99
17.34 23.33 221.43 24.67 12,049 7,032 21.33 25.00 84,04 27.34 27.34 263.67

4.5 Perform calculation and rank all the alternatives
Step 1: Estimate the weight of each criterion. The weight estimation process of all the criteria in Table 3 is conducted
using the pair-wise comparison technique. The implementation of this technique is associated with a number of
selected expert judgements for analysing the priority of each criterion to another by incorporating the ratio scale of
pair-wise comparison in Table 2. Given the four main criteria as an example, a 4×4 pair-wise comparison matrix is
developed for obtaining the weight of each of them. Α(TFEC) is a matrix expressing the qualified judgement with
regard to the relative priority of TOA (T), FA (F), EA (E) and CTA (C).

43

Vol 4, No.18, 2012

The weighting vector of the Α(TFEC) matrix is calculated using the geometric mean in association with the fuzzy set
and defuzzification techniques as described in Eqs. 1 to 4. The weighting vector values of all the main criteria are
computed as follows:

,

Total geometric mean = (1.0625, 1.4730, 1.1833)

The fuzzy weight vector values of all the main criteria are calculated by using Eq. 2 as follows:

,

The above estimates are triangular fuzzy weight vectors. Therefore, defuzzification is applied in order to convert the
triangular fuzzy weight vector values into the corresponding crisp weight vector values (Eq. 3). The weight vector
value of each criterion is computed using Eq. 4 as shown in Table 5.

44

Vol 4, No.18, 2012

Table 5: The weighting vector values of all the main criteria
Fuzzy Weight Vectors Defuzzification Weighting
Vector Value
0.4636 0.4618
0.2855 0.2844
0.1071 0.1067
0.1477 0.1471
1.0039 1.0000

According to the weighting vector values described in Table 5, TOA is 46.18% of priority compared to others, which
is almost half of the total priority. It is highlighted as the most important element influencing shipping companies to
select the most efficient steaming speed of the selected containership. The second important element influencing
shipping companies to achieve the main goal is FA, 28.44% of priority and followed by CTA, 14.71% of priority at
the third place. Finally, EA is the least considered element with 10.67% of priority respectively.

The same calculation process of the weighting vector described previously is applied to determine the priority of
each sub-criterion compared to others in the same criterion’s group at Level 2. There are 11 sub-criteria under the
three groups of main criteria, which are 1) TOA, 2) FA and 3) EA that need to be evaluated. The weighting vector
value of the sub-criterion “JT” is 0.1471, which is same as the weighting vector value of the main criterion “CTA”
because it is the only variable in this group.
The weighting vector values of all the twelve sub-criteria in Level 2 are summarised as follows: ,
, , , 9082, , ,
, , , , .

There are more than two sub-criteria of each criterion except the criterion “CTA”. Therefore, the normalised
weighting vector value of each sub-criterion needs to be determined by multiplying the weighting vector value of the
sub-criterion with the weighting vector value of the corresponding main criterion. Given the TOA’s group as an
example, the normalised weighting vector values of all the sub-criteria in this group are obtained as
follows:

where M, A, P and S stand for MC, AC, PP and SP respectively. In a similar way, the normalised weighting vector
values of all other sub-criteria are obtained as shown in Table 6.

Table 6: The normalised weighting vector values of all the criteria
MC AC PP SP BFC OC AVC SR CO2 NOX SOX JT
Weight
0.0218 0.0002 0.4387 0.0011 0.2583 0.0205 0.0027 0.0029 0.0306 0.0455 0.0306 0.1471
(Wj)

Step 2: Construct the normalised decision matrix, . The normalised decision matrix of the test case is computed
using Eq. 5 as described in Section 3 in association with a set of data in Table 4. The calculation technique is applied
45

Vol 4, No.18, 2012

to all alternatives with respect to all attributes and Table 7 summarises the normalised decision matrix values.

Table 7: The normalised decision matrix
FS 0.2940 0.6748 0.5858 0.7301 0.6899 0.4180 0.0000 0.4795 0.8204 0.6949 0.6949 0.4215
SS 0.4041 0.5670 0.5360 0.5285 0.5343 0.4597 0.3343 0.4795 0.4767 0.5330 0.5330 0.4616
ESS 0.5142 0.4050 0.4595 0.3526 0.3985 0.5150 0.5405 0.5059 0.2722 0.3940 0.3940 0.5144
SSS 0.6970 0.2430 0.3981 0.2514 0.2826 0.5906 0.7721 0.5331 0.1599 0.2780 0.2780 0.5870

Step 3: Calculate the weighted normalised decision matrix, . Referring to the normalised weighting vector value
of each criterion in Table 6 and the normalised decision matrix values in Table 7, the weighted normalised decision
matrix of this test case is calculated using Eq. 6. The calculation process is applied to all alternatives with respect to
all criteria and Table 8 summarises the output of the calculation.

Table 8: The weighted normalised decision matrix
FS 0.0064 0.0001 0.2570 0.0008 0.1782 0.0086 0.0000 0.0014 0.0251 0.0316 0.0212 0.0620
SS 0.0088 0.0001 0.2351 0.0006 0.1380 0.0094 0.0009 0.0014 0.0146 0.0243 0.0163 0.0679
ESS 0.0112 0.0001 0.2016 0.0004 0.1029 0.0106 0.0015 0.0014 0.0083 0.0179 0.0120 0.0757
SSS 0.0152 0.0000 0.1746 0.0003 0.0730 0.0121 0.0021 0.0015 0.0049 0.0126 0.0085 0.0863

Step 4: Determine the positive ideal solution (PIS), and negative ideal solution (NIS), . Referring to Table 8
in association with the goal of each sub-criterion described in Table 3, the positive and negative ideal solutions are
determined using Eqs. 7 and 8. The output values of PIS are summarised in Table 9.

Table 9: The positive ideal solution,
Cost Cost Benefit Benefit Cost Cost Cost Benefit Cost Cost Cost Cost
FS 0.0064 0.0001 0.2570 0.0008 0.1782 0.0086 0.0000 0.0014 0.0251 0.0316 0.0212 0.0620
SS 0.0088 0.0001 0.2351 0.0006 0.1380 0.0094 0.0009 0.0014 0.0146 0.0243 0.0163 0.0679
ESS 0.0112 0.0001 0.2016 0.0004 0.1029 0.0106 0.0015 0.0014 0.0083 0.0179 0.0120 0.0757
SSS 0.0152 0.0000 0.1746 0.0003 0.0730 0.0121 0.0021 0.0015 0.0049 0.0126 0.0085 0.0863

The goal of each criterion in the NIS changes to the opposite way from the PIS, for instance, from “Benefit” to
“Cost” and the other way around. Table 10 shows the output values of NIS.

46

Vol 4, No.18, 2012

Table 10: The negative ideal solution,
Benefit Benefit Cost Cost Benefit Benefit Benefit Cost Benefit Benefit Benefit Benefit
FS 0.0064 0.0001 0.2570 0.0008 0.1782 0.0086 0.0000 0.0014 0.0251 0.0316 0.0212 0.0620
SS 0.0088 0.0001 0.2351 0.0006 0.1380 0.0094 0.0009 0.0014 0.0146 0.0243 0.0163 0.0679
ESS 0.0112 0.0001 0.2016 0.0004 0.1029 0.0106 0.0015 0.0014 0.0083 0.0179 0.0120 0.0757
SSS 0.0152 0.0000 0.1746 0.0003 0.0730 0.0121 0.0021 0.0015 0.0049 0.0126 0.0085 0.0863

Step 5: Calculate the distance separation measures for PIS, and NIS, . Based on the explanation in Step 5

of Section 3, the Euclidean distance technique is applied in this step. The is computed using Eq. 9, while the

is calculated using Eq. 10. The calculation technique is applied to all alternatives with respect to all the criteria.

Table 11 summarises the values of the distance separation measure of each alternative from the PIS and NIS.
Table 11: The distance separation measure values of each alternative

FS 0.1095 0.0866

SS 0.0707 0.0762

ESS 0.0648 0.0843

SSS 0.0866 0.1095

Step 6: Calculate the relative closeness to the ideal solution, . The best alternative of the steaming speed will be
chosen by shipping companies based on the value closest to one which has the shortest distance from the PIS
point and the farthest distance from the NIS point (Eq. 11). The calculation technique is applied to all alternatives in
order to compute the relative closeness values to the ideal solution. As a result, the values of all the steaming
speeds are shown in Table 12.
Step 7: Rank the preference alternatives. Table 12 shows the different values of all the alternatives. The
alternative “ESS” is ranked as the top of the alternatives list. It can be concluded that such an alternative is the most
efficient steaming speed of liner business industry for the Asia-Europe route service taking into consideration all
criteria described in Table 3. The full ranking of all alternatives is as follows: 1) ESS > 2) SSS > 3) SS > 4) FS.
Table 12: The relative closeness to the ideal solution

FS 0.4416

SS 0.5187

ESS 0.5654

SSS 0.5584

47

Vol 4, No.18, 2012

5. Conclusions
A steaming speed of containerships is the most important factor affecting the liner business industry including the
ship expenditure costs and also service performance. By selecting the most efficient steaming speed, it could help
shipping companies to manage its finances in order to minimise the ship expenditure costs, while providing a
reasonable journey time for a selected route service. The FTOPSIS method is fully applied in this paper because it is
capable of dealing with both qualitative and quantitative dataset. By developing a generic model, shipping companies
can make a rational decision for choosing the most efficient steaming speed based on the multiple criteria
requirement for a specific loop. The selection of evaluation criteria and sub-criteria can be improved from time to
time based on various situations faced by shipping companies.

References
Aghajani, A., Osanloo, M., & Soltanmohammadi, H. (2008). Loading-Haulage Equipment Selection in Open Pit
Mines Based on Fuzzy-Topsis Method. 21st World Mining Congress and Expo, Poland: 87-102.
Balli, S., & Korukoglu, S. (2009). Operating System Selection using Fuzzy AHP and TOPSIS Methods.
Mathematical and Computing Modelling 14 (2): 119-130.
CAP-MARINE. (2010). Shipping and Shipbuilding Markets Annual Review 2011. CAP-Marine Assurances &
Reassurances SAS.
Cariou, P. (2010). Is Slow Steaming a Sustainable Mean for Reducing Liner Shipping CO2 Emissions?. Euromed
Management Mare Forum, 14 September, Marseilles, France.
Corbett, J.J., Wang, H., & Winebrake, J.J. (2009). The Effectiveness and Costs of Speed Reductions on Emissions
from International Shipping. Journal of Transportation Research Part D 14 (8): 593-598.
Devi, K., Yadav, S.P., & Kumar, S. (2009). Extension of Fuzzy TOPSIS Method Based on Vague Sets. International
Journal of Computational Cognition 7 (4): 58-62.
Dattorro, J. (2005). Convex Optimization and Euclidean Distance Geometry. Meboo Publishing, USA.
Edlogistics. (2010). The Full Extent of Deepsea Capacity Absorbed by Slow Steaming.
http://edlogistics.org/content/view/78/.
Gower, J.C. (1982). Eucliden Distance Geometry. The Mathematical Scientist 7: 1-14.
Gutierrez, J., & Garcia-Palomares, J.C. (2008). Distance-Measure Impacts on the Calculation of Transport Service
Areas using GIS. Environment and Planning B: Planning and Design 35: 480-503.
Hung, C.C., & Chen, L.H. (2009). A Fuzzy TOPSIS Decision Making Model with Entropy Weight under
Intuitionistic Fuzzy Environment. Proceeding on the International of Multi Conference of Engineers and Computer
Scientist (IMECS) 1: 13-16.
Institute of Chartered Shipbrokers. (2009). Ship Operation and Management. Seamanship International Ltd.
Jahanshahloo, G.R., Lofti, F.H., & Izadikhah, M. (2006). An algorithmic Method to Extend TOPSIS for Decision
Making Problems with Interval Data. Applied Mathematics and Computation 175: 1375-1384.
Magelssen, W. (2010). Energy Analyses for Different Vessel Types: What Do You Need to Know at Design and
Operational Stages?. Paper presentation for a seminar of a practical guide to fuel management, ship performance
and energy efficiency, 26– 27 January, London, United Kingdom.
Mahmoodzadeh, S., Shahrabi, J., Pariazar, M., & Zaeri, M.S. (2007). Project Selection by using Fuzzy AHP and
TOPSIS Technique. International Journal of Human and Social Sciences 1 (3): 135-140.
Man B&W. (2010). Basic Principles of Ship Propulsion Report. Man B&W, Denmark.
Mikhailov, L. (2004). A Fuzzy Approach to Delivering Priorities from Interval Pair-Wise Comparison Judgements.
European Journal of Operational Research 159: 687-704.

48

Vol 4, No.18, 2012

Mohammad, S.K., Zulkornain, Y., & Siong, H.L. (2010). “Location Decision for Foreign Direct Investment in
ASEAN Countries: A TOPSIS Approach.” International Research Journal of Finance and Economics 36: 196-207.
Notteboom, T.E., & Vernimmen, B. (2009). The Effect of High Fuel Costs on Liner Service Configuration in
Container Shipping. Journal of Transport Geography 17 (5): 325-337.
Olson, D.L. (2004). “Comparisons of Weights in TOPSIS Models.” Mathematical and Computing Modelling 40 (7):
721-727.
SEATRADE, (2010). CKYH Introduces Super Slow Steaming. http://www.seatradeasia-online.com/News/4857.html.
Shih, H.S., Shyur, H.J., & Lee, E.S. (2007). An Extension of TOPSIS for Group Decision Making. Mathematical and
Computer Modelling 45: 801-813.
Tsai, H.Y., Huang, B.H., & Wang, A.S. (2008). Combining ANP and TOPSIS Concepts for Evaluation the
Performance of Property Liability Insurance Companies. Journal of Science Social 4 (1): 56-61.
Wu, D., & Olson, D.L. (2006). A TOPSIS Data Mining Demonstration and Application to Credit Scoring.
International Journal of Data Warehousing and Mining 2 (3): 1-10.
Wu, M. (2007). TOPSIS-AHP Simulation Model and Its Application to Supply Chain Management. World Journal of
Modelling and Simulation 3 (3): 196-201.
Yeh, C.H. (2002). A Problem-Based Selection of Multi-Attribute Decision Making Methods. International
Transactions in Operational Research 9: 169-181.
Yoon, K.P., & Hwang, C.L. (1995). Multiple Attribute Decision Making: An Introduction. Series: Quantitative
Applications in the Social Science. SAGE Publications, Inc.
Vidal, J. (2010). Modern Cargo Ships Slow to the Speed of the Sailing Clippers. The Observer, 25 July: 18.
UNCTAD. (2010). Review on Maritime Transport 2010. United Nations Publication, Switzerland.
World Bank. (2010). Global Economic Prospects 2010. World Bank, Washington D.C.

Dr. Noorul Shaiful Fitri Abdul Rahman is currently affiliating with Faculty of Maritime Studies and
Marine Science, Universiti Malaysia Terengganu, Terengganu, Malaysia. His research interests include
steaming speed of containerships, decision making techniques in the maritime sector, shipping
economics and finance, and uncertainty treatment in the maritime sector.

49

This academic article was published by The International Institute for Science,
Technology and Education (IISTE). The IISTE is a pioneer in the Open Access
Publishing service based in the U.S. and Europe. The aim of the institute is
Accelerating Global Knowledge Sharing.

More information about the publisher can be found in the IISTE’s homepage:
http://www.iiste.org

CALL FOR PAPERS

The IISTE is currently hosting more than 30 peer-reviewed academic journals and
collaborating with academic institutions around the world. There’s no deadline for
submission. Prospective authors of IISTE journals can find the submission
instruction on the following page: http://www.iiste.org/Journals/

The IISTE editorial team promises to the review and publish all the qualified
submissions in a fast manner. All the journals articles are available online to the
readers all over the world without financial, legal, or technical barriers other than
those inseparable from gaining access to the internet itself. Printed version of the
journals is also available upon request of readers and authors.

IISTE Knowledge Sharing Partners

EBSCO, Index Copernicus, Ulrich's Periodicals Directory, JournalTOCS, PKP Open
Archives Harvester, Bielefeld Academic Search Engine, Elektronische
Zeitschriftenbibliothek EZB, Open J-Gate, OCLC WorldCat, Universe Digtial
Library , NewJour, Google Scholar

A decision making support of the most efficient steaming speed for the liner business industry

More Related Content

Viewers also liked (20)

Similar to A decision making support of the most efficient steaming speed for the liner business industry (20)

More from Alexander Decker (20)

A decision making support of the most efficient steaming speed for the liner business industry