A Review of Change Detection Techniques of LandCover Using Remote Sensing Data

IOSR Journal of Computer Engineering (IOSR-JCE)
e-ISSN: 2278-0661,p-ISSN: 2278-8727, Volume 17, Issue 3, Ver. IV (May – Jun. 2015), PP 17-21
www.iosrjournals.org
DOI: 10.9790/0661-17341721 www.iosrjournals.org 17 | Page
A Review of Change Detection Techniques of LandCover Using
Remote Sensing Data
Sonam Ross1
, H.S. Bhadauria2
1
M.Tech (CSE) Scholar, Govind Ballabh Pant Engineering College (Pauri garhwal),
Uttarakhand-246194, India
2
Assistant Professor (CSE), Govind Ballabh Pant Engineering College (Pauri garhwal),
Uttarakhand-246194, India
Abstract:This paper goes to provide an overview of various techniques used for change detection of landcover
with conventional and object based techniques. Now days, progression in remote sensing technologies has
become a great encouragement for the researchers to analyze various changes in landcover to maintain the
environmental balance on the earth surface but due to some addressable issues, it is relatively difficult for
researchers to choose one most effective technique.Change detection techniques are having various limitations
of extent of defining changes, correctness of classification maps to point out the variations and so on. Therefore
several methods have been modeled to prove their effectiveness and accurateness in context of change detection.
This paper starts with illustration of prime issues in change detection procedure; review the elementary
techniques of change detection followed by the recent object oriented methods for change analysis. Study
highlighted the technical soundness of the demonstrated approaches.
Keywords:Change Detection, Forest monitoring, Object-oriented,Remote sensing data.
I. Introduction
The surface of earth is changing day by day that is a matter of great concern for researchers to device
strong methods that able to identify the various fluctuations on earth surface at various temporal and spatial
scales.The prime necessities of researchers to build robust techniques for change analysis are the truthful and
constantly updated data so that through appropriate statistics changes can be analyzed and various
recommendations can be offered. Until now we were dependent on the visual interpretation of ground truth
information and some obsolete conventional methods to demonstrate the landcover changes but now new
automated systems have changed the scenario of the research and latest cutting edge object based techniques
brings theconcept of automation and rapidity. In 1972 Landsat-1 has been launched which manifest the
inauguration of satellite remote sensing for various applications. Satellite centered sensors hold the aptitude to
spot the variations systematically and consistently over time due to their snottyand repetitive data acquisition
abilities.The constant observation of land cover is required to provide the information on various changes on
earth surface and especially define the unit of interaction among various phenomenon provides the basis to use
natural assets in a more better way [1]. Basically the idea of change detection has been defined as „the process
of identifying differences in the state of an object or phenomenon by observing it at different times‟, delivers a
means to understand the phenomena and related concepts of change detection [2]. However the updated
knowledge base about changes in surroundings is very essential to demonstrate the latest trends of specific
changes that would help in designing goal-oriented techniques for change analysis.
The viability and accuracy of various change analysis methods have been explored in past three
decades for different purposes [1, 2, 3].Conventionally, pixel based change detection techniques consider single
pixel as their basic elements of change analysis but recentlywith the arrivalof effectual image analysis
algorithms that integrated the change analysis systems with various segmentation and feature extraction
capabilities from satellite imagery, which in turn facilitatenovel functionalities. The new developments in the
field of image analysis introduced most influential object based change detection approach which has evolved
from the concept of object based change analysis [4, 5]. This technique considers the group of pixels as its basic
unit of functionality. Basically image analysis process begins with elementary segmentation step which cut the
image into desired pieces called image objects followed by various classification processes to identify variations
in the study area. The development in the field of remote sensing technologies has increased the demands of
users for accurate and timely change detection information that remain compatible with different
platforms.Change detection is useful in many applications such as land use changes, habitat fragmentation, rate
of deforestation, coastal change, urban sprawl, and other cumulative changes. The various challenges of
selection of appropriate method, data and study of their limitations still need to be addressed.

A Review Of Change Detection Techniques Of Landcover Using Remote Sensing Data
II. Considerations In Change Detection
Many factors ruled the accuracy of change detection procedure using satellite images. Moreover, there
is not a single technique of change detection that has claimed to be suitable for all scenarios. Each method has
its own pros and cons that must be taken under considerations.There are various issues needs to be understand
while performing change detection, as these issues actually going to affect the accuracy of change detection
method.
2.1 Image acquisition
The most crucial step in the change detection pre-processing is the selection of appropriate data
registration dates so that variations and erroneous results can be avoidedin order to increase the interpretability
of the outcomes as same geographic objects are compared at different points of time [6]. The choice of desired
algorithms, sensors, spatial scale and temporal scale are also very important factors to consider. These factors
also affect the performance of image acquisition and it has been proved that in a particular image, finer spatial
resolution enhance the effects of misregistration on change detection accuracy [7]. Basically spatial scale
defines the size of pixel [8] moreover corresponds to the view window of the scene [9, 10]. At a very important
node it has been considered that satellite imagery with low resolution are able to observe the environmental flux
precisely over large geographical area but several difficulties are encountered in case of mixed pixels to mark
the variations efficiently. However, interested image objects can be outlined from high-spatial-resolution images
more efficiently but with possibility of creation of fake alterations.A further note on high resolution is that with
it, it is more difficult to perform an accurate image registration than by using low resolution, resulting in a
decrease of change detection accuracy.
The concept of image acquisition is also influenced by the temporal scale which corresponds to the
time gap between consecutive acquisitions of the desired site images from same geographic location [11].
Temporal scale is also term as temporal resolution. Several time it has been argued that what kind of images
would be suitable for what kind of region and what would be the correct temporal scale to analyze the
differences in that area. In order to tackle such kind of difficulties analyst first clarify the research objective and
then go for other factors to get expected outcomes.
2.2Viewing geometry and Radiometric correction or normalization
During acquisition of satellite images, there are several factors works to affect the reflectance value of
image objects on the surface of earth such as the value of angle, means at the time of image acquisition what is
the value of angle has been chosen. Basically in ideal situation sensors remain at nadir position so that top view
of the images can be captured but these sensors may tilt accordingly to capture the detailed view of the desired
objects as Quickbird can tilt up to 20 degree [12]. Furthermore, spatial resolution of a particular object is a
significant aspect to consider which is decreased by the different look angles of the sensors in order to collect
more views of that object whereas sun angle is equally important to affect the reflectance of the objects at
different locations. Therefore, it has been suggested that same sensor angle should be selected in order to collect
the object information for change detection [12].There is one more factor calledRadiometric correction which is
also responsible for checkout of the changes as multidate data used for the process of change detection as it
could be the possibility to occur radiance dissimilarities due to atmospheric turbulences and senor‟s improper
working. In order to improve the accuracy of change detection process, different complex radiometric
calibration improvement algorithm not even achieve the target and therefore relative radiometric correction has
taken into consideration to standardize the images bands intensities.
III. Change Detection Techniques Classification
It has been claimed by the researchers that it is very difficult to observe earth surface corresponding to
the changes with satisfactory results [13]. Therefore, so many methods or algorithms have been explored as well
as modified with fast changing remote sensing technologyto notice the changes on earth surface. Basically,
change detection techniques have been divided into two categories that is pre-classification and post-
classification change detection [14, 15]. The techniques that comes under pre-classification category, just extract
minimal information about changes whereas post classification techniques separate changes in detail way with
appropriate attributes [16, 17] but have some limitations of not detecting subtle changes within land cover
classes [18].Here, we tried to describe as many as methodologies including latest object oriented change
detection methods. All methods are equally important and possess their own strengths and weaknesses.The
general structure of the change detection procedure is depicted in fig 1 and several categories of the change
detection have been tabulated in table 1.
Monotemporal Change Delineation outlined the change detection algorithm using pattern recognition
module which acts as functions for it. Existing records are the basis of this approach to represent the condition
of interested area before destructions. Delta classification technique individually creates results of spectral

extraction in timely manner, complete change matrix is achieved through separate comparisons of pixels and
segments and finally changes can be defined. This method comes under post-classification category and
advantageous in avoiding radiometric calibration problem of multi date data. Initial classifications are very
important as it determine the accuracy of delta classification. Appropriate classification method selection can
particularize the abrupt changes in desired area [19].Unsatisfactory results can be obtained using delta
classification due to misclassification and misregistration errors [17]. The most effective algorithm for natural
environments is multidimensional temporal feature space analysis to identify the tiny changes but analyst
complained about its less information providing nature about changes [15]. This method uses the concept of
image overlay for pixel enrichment to define the changes. Composite Analysis is a complex method due to
addition of data from two different dates. In this method, combined registration of image data can create
confusion or provide confusing change information where the final decision is based on the decision of each
stage. Image Differencing is robust, easy and most commonly applied algorithm for change detection for
different geographical conditions [2] but requires atmospheric calibration and its same value may represent
ambiguous meaning. Basically, subtraction is the main theme of this method as it subtracts the date 1 image
from date 2 image to create change matrix where positive and negative value means change occur in study area
and zero means no change occur in that particular area.
Fig 1 Change detection procedure
The concept of Image Ratioingcircled around threshold value chosen for change, it is simplest, fast but
may encounter with viewing geometry aspects. The value of ratio is defined by the pixel analysis as unchanged
pixel yield one ratio value and change areas yield ratio value higher or lower than one.Multitemporal linear data
transformation techniques can be successfully applied to data sets from different dates that piled in two different
n-dimensional space where n represents the number of bands comprises in a particular image. Principal
component analysis and tasseled cap are the examples of this technique that are able to find out the minor
transformations in the forest area. Even recently generalize version of tasseled cap has been developed to
improve the functionality of the underlined method [20].Change vector analysis has been considered as the first
automated method to mark the variation. This method produces direction and intensity image of particular
changes where direction image is responsible for detecting change. Moreover, it combines the tasseled cap
transformation and tries to catch the movement of different segments derived from the image in n-dimensional
spectral space in the form of direction and magnitude [21]. It is used in the situation when detailed change
information is required.Image Regression technique makes use of powerful regression function to establish the
relationship between pixel values of multi-date images where changes indicated by the dimension of the
residuals. Furthermore, this technique avoids atmospheric influence and is not able to present change
matrix.Multitemporal Biomass Index method was developed for forest monitoring but it is not able to fulfill the
objective. Background Subtraction techniques were used for observe the deforestation in tropical region. But the
use of both methods was limited as results was not that much efficient and useful [2].
In continuation, some object based change detection algorithms also have been reviewed in order to
highlight the recent advancement in remote sensing field. Image-object change detection algorithm utilize
threshold value in order to compare image-objects like pixel based algorithms perform operations pixel-by-
pixelto determine the exact changes. Spectral values are responsible to analyze the changes in segmented
imagery and direct image comparisons are accentuated in these algorithms.A class-object change detection
Image Selection
Radiometric Corrections
Multitemporal Analysis
Image Registration
Change Detection

algorithmclassifies different objects from multi-temporal data independently to determine the detailed variations
where texture and spectral features of the objects are not considered. There are several factors such as viewing
geometry, atmospheric attenuation and so on that can affect the originality of the geographic feature while areas
remain same but at different dates [21].Multitemporal-object change detection algorithm combines sequential
images of same place but taken at different point of time to segment and determine corresponding geographic
changes in the scene.Hybrid change detection algorithmsarea kind of unique category that make use of pixel and
object phenomenon and the concept behind this strategy is that pixels derived the initial changes that further
refined by the object criteria for better understanding of the results.
Table 1.The seven change detection technique categories
Techniquecategories Example of techniques
1 Algebra Based Approach  Image differencing
 Image regression
 Image ratioing
 Vegetation index differencing
 Change vector analysis
2 Transformation  PCA
 Tasseled Cap (KT)
 Gramm-Schmidt (GS)
 Chi-Square
3 Classification Based Post-Classification
Comparison
 Spectral-Temporal Combined Analysis
 EM Transformation
 Unsupervised Change Detection
 Hybrid Change Detection
 Artificial Neural Networks
4 Advanced Models  Li-Strahler Reflectance Model
 Spectral Mixture Model
 Biophysical Parameter Method
5 GIS  Integrated GIS and RS Method
 GIS Approach
6 visual Analysis  Visual Interpretation
7 other Change Detection Techniques  Measures of spatial dependence
 Knowledge-based vision system
 Area production method
 Combination of three indicators: vegetation indices, land surface
temperature, and spatial structure
 Change curves
 Generalized linear models
 Curve-theorem-based approach
 Structure-based approach
 Spatial statistics-based method
IV. Conclusions
Monitoring of earth surface is possible with the wide range of multi-source remote sensing data and
feasible techniques to observe the alterations. There are lot of methods have been evolved in past decades and
these methods also succeed to produce quality results but automation, cost , time and accuracy is the real
challenge that needs to be meet. In past decade, new object-based techniques have been introduced to overcome
the mentioned shortcomings and up to some level these techniques meet the goal of generating satisfactory
outcomes of change detection with great potential but it does not mean conventional methods are useless, they
are also useful in other context. Object-based methods are highly recommended due to their efficient nature in
presenting detailed change information. The potential of this paradigm can be incorporated with reconsideration
of conventional methods to increase the functionality and it is possible to use both methods simultaneously to
produce results with better precision.This is a wide area of research; all the methods we have discussed above
have great potential and promising capabilities in the field of change detection but still have lot of scope to
develop innovative techniques and methods in order to get effective results of change detection.
References
[1] D. Lu, P.Mausel, E. Brondizioand E. Moran, “Change detection techniques”, International Journal of Remote Sensing, 25, pp.
2365–2407, 2004.
[2] A.Singh, “Digital change detection techniques using remotely-sensed data”, International Journal of Remote Sensing, 10, pp. 898–
1003, 1989.
[3] P.R. Coppin, M.E. Bauer, “Digital change detection in forest ecosystems with remote sensing imagery”, Remote Sensing Reviews,
13, pp. 207–234, 1996.
[4] T.Blaschke, “Towards a framework for change detection based on image objects”,GöttingerGeographischeAbhandlungen, 113, pp.
1–9, 2005.

[5] O.Hall, G.J. Hay, “Amultiscale object-specific approach to digital change detection”, International Journal of Applied Earth
Observation and Geoinformation, 4, pp. 311–327, 2003.
[6] J.R.G. Townshend, C.O. Justice, W. Li, C. Gurney, J. Mcmanus, “The impact of misregistration on change detection”, IEEE
Transactions on Geoscience and Remote Sensing, 30, pp. 1054–1060, 1992.
[7] X. Dai, S.Khorram, “The effects of image misregistration on the accuracy of remotely sensed change detection”, IEEE Transactions
on Geoscience and Remote Sensing, 36, pp. 1566–1577, 1998.
[8] C.E.Woodcock, A.H. Strahler, “The factor of scale in remote sensing. Remote Sensing of Environment”,21, pp. 311–332, 1987.
[9] D.J. Marceau, G.J. Hay, “Remote sensing contribution to the scale issue. Canadian Journal of Remote Sensing”, 25, pp. 357–366,
1999.
[10] P. Aplin, “On Scales and dynamics in observing the environment. International Journal of Remote Sensing”, 27, pp. 2123–2140,
2006.
[11] P.M.Mather, “Computer Processing of Remotely-Sensed Images: An Introduction”, 3rd ed. (Chichester: John John Wiley & Sons,
Inc.), 2004
[12] J.R. Jensen, “ Introductory Digital Image Processing”, 3rd ed. (Upper Saddle River, NJ:Pearson Prentice Hall),2005
[13] D. Muchoney, B. Haack, “Change detection for monitoring forest defoliation”, PE & RS- Photogrammetric Engineering & Remote
Sensing, 60(10): 1243-1251, 1994.
[14] R. Nelson, “Detecting forest canopy change due to insect activity using Landsat MSS”, Photogrammetric Engineering and Remote
Sensing, 1983, 49: 1303-1314, 1983.
[15] P. Pilon, P. Howarth, “An enhanced classification approach to change detection in semi-arid environments”, Photogrammetric
Engineering and Remote Sensing, 54: 1709-1716, 1988.
[16] J.Colwell, F. Weber, “Forest change detection”, Proceedings of the 15th International Symposium on Remote Sensing of
Environment, Ann Arbor, MI, USA, ERIM, 1981.
[17] P. Howarth, G. Wickware, “Procedures for change detection using Landsat digital data”, International Journal of Remote Sensing
2(3): 277-291, 1981.
[18] R. Macleod, R. Congalton, “A quantitative comparison of change-detection algorithms for monitoring eelgrass from remotely
sensed data”, Photogrammetric Engineering and Remote Sensing 64(3): 207-216, 1998.
[19] J.E. Colwell, G. Davis, F. Thomson, “Detection and measurement of changes in the productionand quality of renewable resources”,
USDA Forest Service Final Report No. 145300-4-F, ERIM,Ann Arbor, Michigan. 1981.
[20] J.B. Collins, C.E. Woodcock, C.E, “Change detection using the Gramm–Schmidt transformation applied to mapping forest
mortality”, Remote Sensing of Environment, 50, pp. 267–279, 1994.
[21] W. Malila, “Change vector analysis- An approach for detecting forest changes with Landsat”, Machine processing of remotely
sensed data and soil information systems and remote sensing and soil survey: 326-336, 1980.
[22] M.A. Wulder, S.M. Ortlepp, J.C. White, N.C. Coops, N.C, “Impact of sun-surfacesensor geometry upon multitemporalhighspatial
resolution satellite imagery”, Canadian Journal of Remote Sensing, 34, pp. 455–461, 2008a.

A Review of Change Detection Techniques of LandCover Using Remote Sensing Data

More Related Content

What's hot (20)

Similar to A Review of Change Detection Techniques of LandCover Using Remote Sensing Data (20)

More from iosrjce (20)

Recently uploaded (20)

A Review of Change Detection Techniques of LandCover Using Remote Sensing Data