Advantages & uses of led lighting
- 1. Advantages & Uses of LED Lighting
- 2. Advantages of LED Lighting
- 3. Energy Efficiency LEDs are highly efficient. In traffic signal lights, a strong market for LEDs, a red traffic signal head that contains 196 LEDs draws 10W versus its incandescent counterpart that draws 150W. Various estimates of potential energy savings range from 82% to 93%. With the red signal operating about 50% of the day, the complete traffic signal unit is estimated to save 35-40%. It is estimated that replacing incandescent lamps in all of America’s some 260,000 traffic signals (red, green and yellow) could reduce energy consumption by nearly 2.5 billion kWh. At the end of 1997, more than 150,000 signals were retrofitted, almost all of them red.
- 4. Long Life Some LEDs are projected to produce a long service life of about 100,000 hours. For this reason LEDs are ideal for hard-to-reach/ maintain fixtures such as exit sign lighting and, combined with its durability, pathway lighting. This service life can be affected by the application and environmental factors, including heat and if being overdriven by the power supply.
- 5. Range of Colors LEDs are available in a range of colors (see above), including white light. White light can also be produced through color mixing of red, blue and green LEDs. In addition, through the innovative combination of various-colored LEDs, dramatic color-changing effects can be produced from a single fixture through dynamic activation of various sets of LEDs. Manufacturers such as Color Kinetics offer fixtures that employ this principle. Color Kinetics offers track, theatrical, underwater, outdoor and other fixtures utilizing variable-intensity LEDs that can provide more than 16.7 million colors, including white light.
- 6. No UV Emissions/Little Infrared LEDs produce no UV radiation and little heat, making them ideal for illuminating objects, such as works of art, that are sensitive to UV light. Durable LEDs are highly rugged. They feature no filament that can be damaged due to shock and vibrations. They are subject to heat, however, and being overdriven by the power supply.
- 7. Small Size/Design Flexibility A single LED is very small and produces little light overall. However, this weakness is actually its strength. LEDs can be combined in any shape to produce desired lumen packages as the design goals and economics permit. In addition, LEDs can be considered miniature light fixtures; distribution of light can be controlled by the LEDs’ epoxy lens, simplifying the construction of architectural fixtures designed to utilize LEDs. A controller can be connected to an LED fixture to selectively dim individual LEDs, resulting in the dynamic control of distribution, light output and color. Finally, DC power enables the unit to be easily adaptable to different power supplies.
- 8. Other Benefits The other benefits of LEDs include: Lights instantly Can be easily dimmed Silent operation Low-voltage power supply (increased safety)
- 9. Uses of LED Lighting Power sources The current–voltage characteristic of an LED is similar to other diodes, in that the current is dependent exponentially on the voltage (see Shockley diode equation). This means that a small change in voltage can cause a large change in current. If the applied voltage exceeds the LED's forward voltage drop by a small amount, the current rating may be exceeded by a large amount, potentially damaging or destroying the LED. The typical solution is to use constant-current power supplies to keep the current below the LED's maximum current rating.
- 10. Electrical polarity As with all diodes, current flows easily from p-type to n-type material. However, no current flows and no light is emitted if a small voltage is applied in the reverse direction. If the reverse voltage grows large enough to exceed the breakdown voltage, a large current flows and the LED may be damaged. If the reverse current is sufficiently limited to avoid damage, the reverse-conducting LED is a useful noise diode. Safety and health The vast majority of devices containing LEDs are "safe under all conditions of normal use", and so are classified as "Class 1 LED product"/"LED Klasse 1". At present, only a few LEDs—extremely bright LEDs that also have a tightly focused viewing angle of 8° or less—could, in theory, cause temporary blindness.
- 11. Why LED's are chosen for many applications •LEDs are ideal for use in applications that are subject to frequent on-off cycling, unlike fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting. •LEDs can very easily be dimmed or strobed •LEDs light up very quickly. A typical red indicator LED will achieve full brightness in microseconds. •LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs •LEDs, being solid state components, are difficult to damage with external shock, unlike fluorescent and incandescent bulbs which are fragile.
- 12. LED daytime running lights of Audi A4
- 13. LED destination signs on buses, one with a colored route number
- 15. For More Information, Visit: http://www.adtronics.net/