Amplifiers tutorial

Amplifiers
i
AbouttheTutorial
An electronic signal contains some information which cannot be utilized if doesn’t have proper
strength. The process of increasing the signal strength is called as Amplification. Almost all
electronic equipment must include some means for amplifying the signals. We find the use of
amplifiers in medical devices, scientific equipment, automation, military tools, communication
devices, and even in household equipment.
In this tutorial, we will discuss all the important concepts from the introduction of transistors along
with the amplifier action of transistor. In addition, we will cover all the topics related to all the major
types of transistor amplifiers in detail.
Audience
This tutorial will suit all beginners who want to learn the fundamental concepts of transistors and
transistor amplifier circuits.
Prerequisites
Though this tutorial is intended for beginners in the field of Electronics and Communications, we
expect the readers to have some prior knowledge regarding the functioning of different electronic
components. Therefore, we suggest that you first go through our tutorial on Basic Electronics.
Disclaimer&Copyright
 Copyright 2017 by Tutorials Point (I) Pvt. Ltd.
All the content and graphics published in this e-book are the property of Tutorials Point (I) Pvt. Ltd.
The user of this e-book is prohibited to reuse, retain, copy, distribute or republish any contents or a
part of contents of this e-book in any manner without written consent of the publisher.
We strive to update the contents of our website and tutorials as timely and as precisely as possible,
however, the contents may contain inaccuracies or errors. Tutorials Point (I) Pvt. Ltd. provides no
guarantee regarding the accuracy, timeliness or completeness of our website or its contents
including this tutorial. If you discover any errors on our website or in this tutorial, please notify us at
contact@tutorialspoint.com.

Amplifiers
ii
TableofContents
About the Tutorial ............................................................................................................................................i
Audience...........................................................................................................................................................i
Prerequisites.....................................................................................................................................................i
Disclaimer & Copyright.....................................................................................................................................i
Table of Contents ............................................................................................................................................ ii
1. Materials ─ Introduction ...........................................................................................................................1
Types of Materials ...........................................................................................................................................1
Semiconductors...............................................................................................................................................1
P-N Junction.....................................................................................................................................................2
Biasing of a Diode............................................................................................................................................4
PART 1: TRANSISTORS.................................................................................................................5
2. Transistors ─ Overview .............................................................................................................................6
Constructional Details of a Transistor .............................................................................................................6
Transistor Biasing ............................................................................................................................................8
Operation of PNP Transistor............................................................................................................................9
Operation of NPN Transistor ...........................................................................................................................9
Advantages of Transistors .............................................................................................................................10
3. Transistor Configurations........................................................................................................................11
Common Base (CB) Configuration .................................................................................................................11
Common Emitter (CE) Configuration.............................................................................................................13
Common Collector (CC) Configuration ..........................................................................................................16
4. Transistor Regions of Operation .............................................................................................................18
Transistor Biasing ..........................................................................................................................................18
5. Transistor Load Line Analysis ..................................................................................................................21
Output Characteristics...................................................................................................................................21
Load Line........................................................................................................................................................21
DC Load Line..................................................................................................................................................22
AC Load Line ..................................................................................................................................................24
AC and DC Load Line......................................................................................................................................25
6. Operating Point ......................................................................................................................................26
Faithful Amplification ....................................................................................................................................26
Key factors for Faithful Amplification............................................................................................................28
7. Transistor as an Amplifier .......................................................................................................................31
Transistor Amplifier.......................................................................................................................................31
Performance of Amplifier..............................................................................................................................32
8. Transistor Biasing....................................................................................................................................34
Transistor Biasing ..........................................................................................................................................34
Stabilization...................................................................................................................................................35
Stability Factor...............................................................................................................................................36

Amplifiers
iii
9. Methods of Transistor Biasing ................................................................................................................37
Base Resistor Method....................................................................................................................................37
Collector to Base Bias ....................................................................................................................................39
Biasing with Collector Feedback resistor.......................................................................................................40
Voltage Divider Bias Method.........................................................................................................................42
10. Bias Compensation .................................................................................................................................45
Diode Compensation for Instability...............................................................................................................45
Other Compensations....................................................................................................................................48
Thermal Resistance .......................................................................................................................................49
Heat Sink........................................................................................................................................................50
PART 2: AMPLIFIERS..................................................................................................................51
11. Basic Amplifier........................................................................................................................................52
Single-stage Transistor Amplifier...................................................................................................................52
Practical Circuit of a Transistor Amplifier......................................................................................................53
Various Circuit currents.................................................................................................................................54
12. Classification of Amplifiers......................................................................................................................56
13. Amplifiers – Based on Configurations .....................................................................................................58
CB Amplifier...................................................................................................................................................58
CE Amplifier...................................................................................................................................................60
CC Amplifier...................................................................................................................................................61
Comparison between CB CE CC Amplifiers....................................................................................................63
14. Multi-Stage Transistor Amplifier.............................................................................................................64
Types of Coupling ..........................................................................................................................................64
Role of Capacitors in Amplifiers ....................................................................................................................65
Amplifier Consideration.................................................................................................................................66
15. RC Coupling Amplifier .............................................................................................................................67
Construction of a Two-stage RC Coupled Amplifier ......................................................................................67
Operation of RC Coupled Amplifier ...............................................................................................................67
Frequency Response of RC Coupled Amplifier ..............................................................................................68
Advantages of RC Coupled Amplifier.............................................................................................................69
Disadvantages of RC Coupled Amplifier ........................................................................................................69
Applications of RC Coupled Amplifier............................................................................................................69
16. Transformer Coupled Amplifier...............................................................................................................70
Construction of Transformer Coupled Amplifier...........................................................................................70
Operation of Transformer Coupled Amplifier ...............................................................................................71
Frequency Response of Transformer Coupled Amplifier ..............................................................................71
Advantages of Transformer Coupled Amplifier.............................................................................................72
Disadvantages of Transformer Coupled Amplifier ........................................................................................72
17. Direct Coupled Amplifier.........................................................................................................................73
Direct Coupled Amplifier ...............................................................................................................................73
18. Power Amplifiers ....................................................................................................................................75
Power Amplifier.............................................................................................................................................75
Power Transistor ...........................................................................................................................................75

Amplifiers
iv
Difference between Voltage and Power Amplifiers ......................................................................................76
19. Classification of Power Amplifiers...........................................................................................................77
Classification Based on Frequencies..............................................................................................................77
Classification Based on Mode of Operation ..................................................................................................77
Terms Considering Performance...................................................................................................................78
20. Class A Power Amplifier..........................................................................................................................79
21. Transformer Coupled Class A Power Amplifier........................................................................................83
22. Push-Pull Class A Power Amplifier ..........................................................................................................87
23. Class B Power Amplifier ..........................................................................................................................90
Class B Operation ..........................................................................................................................................90
Class B Push-Pull Amplifier ............................................................................................................................91
Power Efficiency of Class B Push-Pull Amplifier ............................................................................................92
Complementary Symmetry Push-Pull Class B Amplifier................................................................................93
24. Class AB and Class C Power Amplifiers ....................................................................................................95
Cross-over Distortion.....................................................................................................................................95
Class AB Power Amplifier ..............................................................................................................................96
Class C Power Amplifier.................................................................................................................................98
25. Tuned Amplifiers.....................................................................................................................................99
What is a Tuned Amplifier? ...........................................................................................................................99
Types of Tuned Circuits ...............................................................................................................................100
Characteristics of a Parallel Tuned Circuit...................................................................................................101
Advantages of Tuned Amplifiers .................................................................................................................102
Frequency Response of Tuned Amplifier.....................................................................................................103
26. Types of Tuned Amplifiers ....................................................................................................................104
Single Tuned Amplifier ................................................................................................................................104
Double Tuned Amplifier ..............................................................................................................................105
Frequency Response of Double Tuned Amplifier ........................................................................................106
27. Feedback Amplifiers..............................................................................................................................109
Principle of Feedback Amplifier...................................................................................................................109
Types of Feedbacks .....................................................................................................................................110
28. Negative Feedback Amplifiers...............................................................................................................112
29. Emitter Follower & Darlington Amplifier...............................................................................................115
Emitter Follower..........................................................................................................................................115
Voltage Gain of Emitter Follower ................................................................................................................116
Darlington Amplifier....................................................................................................................................118
Biasing Analysis............................................................................................................................................119
30. Noise in Amplifiers................................................................................................................................121
Noise............................................................................................................................................................121
Effects of Noise............................................................................................................................................122
Signal to Noise Ratio....................................................................................................................................122
Types of Noise .............................................................................................................................................122

Amplifiers
5
Every material in nature has certain properties. These properties define the behavior of the materials.
Material Science is a branch of electronics that deals with the study of flow of electrons in various
materials or spaces, when they are subjected to various conditions.
Due to the intermixing of atoms in solids, instead of single energy levels, there will be bands of energy
levels formed. These set of energy levels, which are closely packed are called as Energy bands.
TypesofMaterials
The energy band in which valence electrons are present is called Valence band, while the band in which
conduction electrons are present is called Conduction band. The energy gap between these two bands
is called as Forbidden energy gap.
Electronically, the materials are broadly classified as Insulators, Semiconductors, and Conductors.
 Insulators ─ Insulators are such materials in which the conduction cannot take place,
due to the large forbidden gap. Examples: Wood, Rubber.
 Semiconductors ─ Semiconductors are such materials in which the forbidden energy
gap is small and the conduction takes place if some external energy is applied.
Examples: Silicon, Germanium.
 Conductors ─ Conductors are such materials in which the forbidden energy gap
disappears as the valence band and conduction band become very close that they
overlap. Examples: Copper, Aluminum.
Of all the three, insulators are used where resistivity to electricity is desired and conductors are used
where the conduction has to be high. The semiconductors are the ones which give rise to a specific
interest of how they are used.
Semiconductors
A Semiconductor is a substance whose resistivity lies between the conductors and insulators. The
property of resistivity is not the only one that decides a material as a semi-conductor, but it has few
properties as follows.
 Semiconductors have the resistivity which is less than insulators and more than
conductors.
 Semiconductors have negative temperature co-efficient. The resistance in semi-
conductors, increases with the decrease in temperature and vice versa.
1. MATERIALS ─ INTRODUCTION

Amplifiers
6
 The Conducting properties of a Semi-conductor changes, when a suitable metallic
impurity is added to it, which is a very important property.
The Semiconductor devices are extensively used in the field of electronics. The transistor has replaced
the bulky vacuum tubes, from which the size and cost of the devices got decreased and this revolution
has kept on increasing its pace leading to the new inventions like integrated electronics. Semiconductors
can be classified as shown below.
A semiconductor in its extremely pure form is said to be an intrinsic semiconductor. But the conduction
capability of this pure form is too low. In order to increase the conduction capability of intrinsic
semiconductor, it is better to add some impurities. This process of adding impurities is called as Doping.
Now, this doped intrinsic semiconductor is called as an Extrinsic Semiconductor.
The impurities added, are generally pentavalent and trivalent impurities. Depending upon these types
of impurities, another classification is done. When a pentavalent impurity is added to a pure
semiconductor, it is called as N-type extrinsic Semiconductor. As well, when a trivalent impurity is
added to a pure semiconductor, it is called as P-type extrinsic Semiconductor.
P-NJunction
When an electron moves from its place, a hole is said to be formed there. So, a hole is the absence of an
electron. If an electron is said to be moved from negative to positive terminal, it means that a hole is
being moved from positive to negative terminal.
The materials mentioned above are the basics of semiconductor technology. The N-type material
formed by adding pentavalent impurities has electrons as its majority carriers and holes as minority

Amplifiers
7
carriers. While, the P-type material formed by adding trivalent impurities has holes as its majority
carriers and electrons as minority carriers.
Let us try to understand what happens when the P and N materials are joined together.
If a P-type and an N-type material are brought close to each other, both of them join to form a junction,
as shown in the figure below.
A P-type material has holes as the majority carriers and an N-type material has electrons as the
majority carriers. As opposite charges attract, few holes in P-type tend to go to n-side, whereas few
electrons in N-type tend to go to P-side.
As both of them travel towards the junction, holes and electrons recombine with each other to
neutralize and forms ions. Now, in this junction, there exists a region where the positive and negative
ions are formed, called as PN junction or junction barrier as shown in the figure.

Amplifiers
8
The formation of negative ions on P-side and positive ions on N-side results in the formation of a narrow
charged region on either side of the PN junction. This region is now free from movable charge carriers.
The ions present here have been stationary and maintain a region of space between them without any
charge carriers.
As this region acts as a barrier between P and N type materials, this is also called as Barrier junction.
This has another name called as Depletion region meaning it depletes both the regions. There occurs a
potential difference VD due to the formation of ions, across the junction called as Potential Barrier as it
prevents further movement of holes and electrons through the junction. This formation is called as a
Diode.
BiasingofaDiode
When a diode or any two terminal components are connected in a circuit, it has two biased conditions
with the given supply. They are Forward biased condition and Reverse biased condition.
Forward Biased Condition
When a diode is connected in a circuit, with its anode to the positive terminal and cathode to the
negative terminal of the supply, then such a connection is said to be forward biased condition.
This kind of connection makes the circuit more and more forward biased and helps in more conduction.
A diode conducts well in forward biased condition.
Reverse Biased Condition
When a diode is connected in a circuit, with its anode to the negative terminal and cathode to the
positive terminal of the supply, then such a connection is said to be Reverse biased condition.

Amplifiers
9
This kind of connection makes the circuit more and more reverse biased and helps in minimizing and
preventing the conduction. A diode cannot conduct in reverse biased condition.
With the above information, we now have a good idea of what a PN junction is. With this knowledge, let
us move on and learn about transistors in the next chapter.

Amplifiers
10
Part 1: Transistors

Amplifiers
11
After knowing the details about a single PN junction, or simply a diode, let us try to go for the two PN
junction connection. If another P-type material or N-type material is added to a single PN junction,
another junction will be formed. Such a formation is simply called as a Transistor.
A Transistor is a three terminal semiconductor device that regulates current or voltage flow and acts as
a switch or gate for signals.
Uses of a transistor
 A transistor acts as an Amplifier, where the signal strength has to be increased.
 A transistor also acts as a switch to choose between available options.
 It also regulates the incoming current and voltage of the signals.
ConstructionalDetailsofaTransistor
The Transistor is a three terminal solid state device which is formed by connecting two diodes back to
back. Hence it has got two PN junctions. Three terminals are drawn out of the three semiconductor
materials present in it. This type of connection offers two types of transistors. They are PNP and NPN
which means an N-type material between two P-types and the other is a P-type material between two
N-types respectively.
The following illustration shows the basic construction of transistors
The three terminals drawn from the transistor indicate Emitter, Base and Collector terminals. They have
their functionality as discussed below.
Emitter
 The left-hand side of the above shown structure can be understood as Emitter.
2. TRANSISTORS ─ OVERVIEW

Amplifiers
12
 This has a moderate size and is heavily doped as its main function is to supply a
number of majority carriers, i.e. either electrons or holes.
 As this emits electrons, it is called as an Emitter.
 This is simply indicated with the letter E.
Base
 The middle material in the above figure is the Base.
 This is thin and lightly doped.
 Its main function is to pass the majority carriers from the emitter to the collector.
 This is indicated by the letter B.
Collector
 The right side material in the above figure can be understood as a Collector.
 Its name implies its function of collecting the carriers.
 This is a bit larger in size than emitter and base. It is moderately doped.
 This is indicated by the letter C.
The symbols of PNP and NPN transistors are as shown below.
The arrow-head in the above figures indicated the emitter of a transistor. As the collector of a transistor
has to dissipate much greater power, it is made large. Due to the specific functions of emitter and
collector, they are not interchangeable. Hence the terminals are always to be kept in mind while using a
transistor.
In a Practical transistor, there is a notch present near the emitter lead for identification. The PNP and
NPN transistors can be differentiated using a Multimeter. The following image shows how different
practical transistors look like.

Amplifiers
13
We have so far discussed the constructional details of a transistor, but to understand the operation of a
transistor, first we need to know about the biasing.
TransistorBiasing
As we know that a transistor is a combination of two diodes, we have two junctions here. As one
junction is between the emitter and base, that is called as Emitter-Base junction and likewise, the other
is Collector-Base junction.
Biasing is controlling the operation of the circuit by providing power supply. The function of both the PN
junctions is controlled by providing bias to the circuit through some dc supply. The figure below shows
how a transistor is biased.

Amplifiers
14
By having a look at the above figure, it is understood that
 The N-type material is provided negative supply and P-type material is given positive
supply to make the circuit Forward bias.
 The N-type material is provided positive supply and P-type material is given negative
supply to make the circuit Reverse bias.
By applying the power, the emitter base junction is always forward biased as the emitter resistance is
very small. The collector base junction is reverse biased and its resistance is a bit higher. A small
forward bias is sufficient at the emitter junction whereas a high reverse bias has to be applied at the
collector junction.
The direction of current indicated in the circuits above, also called as the Conventional Current, is the
movement of hole current which is opposite to the electron current.
OperationofPNPTransistor
The operation of a PNP transistor can be explained by having a look at the following figure, in which
emitter-base junction is forward biased and collector-base junction is reverse biased.
The voltage VEE provides a positive potential at the emitter which repels the holes in the P-type material
and these holes cross the emitter-base junction, to reach the base region. There a very low percent of
holes re-combine with free electrons of N-region. This provides very low current which constitutes the
base current IB. The remaining holes cross the collector-base junction, to constitute collector current IC,
which is the hole current.
As a hole reaches the collector terminal, an electron from the battery negative terminal fills the space in
the collector. This flow slowly increases and the electron minority current flows through the emitter,

Amplifiers
15
where each electron entering the positive terminal of VEE, is replaced by a hole by moving towards the emitter
junction. This constitutes emitter current IE.
Hence we can understand that—
 The conduction in a PNP transistor takes place through holes.
 The collector current is slightly less than the emitter current.
 The increase or decrease in the emitter current affects the collector current.
OperationofNPNTransistor
The operation of an NPN transistor can be explained by having a look at the following figure, in which
emitter-base junction is forward biased and collector-base junction is reverse biased.
The voltage VEE provides a negative potential at the emitter which repels the electrons in the N-type
material and these electrons cross the emitter-base junction, to reach the base region. There, a very low
percent of electrons re-combine with free holes of P-region. This provides very low current which
constitutes the base current IB. The remaining holes cross the collector-base junction, to constitute the
collector current IC.
As an electron reaches out of the collector terminal, and enters the positive terminal of the battery, an
electron from the negative terminal of the battery VEE enters the emitter region. This flow slowly
increases and the electron current flows through the transistor.
Hence we can understand that—
 The conduction in a NPN transistor takes place through electrons.
 The collector current is higher than the emitter current.
 The increase or decrease in the emitter current affects the collector current.

Amplifiers
16
AdvantagesofTransistors
There are many advantages of using a transistor, such as—
 High voltage gain.
 Lower supply voltage is sufficient.
 Most suitable for low power applications.
 Smaller and lighter in weight.
 Mechanically stronger than vacuum tubes.
 No external heating required like vacuum tubes.
 Very suitable to integrate with resistors and diodes to produce ICs.
There are few disadvantages such as they cannot be used for high power applications due to lower
power dissipation. They have lower input impedance and they are temperature dependent.

Amplifiers
17
Any transistor has three terminals, the emitter, the base, and the collector. Using these 3 terminals the
transistor can be connected in a circuit with one terminal common to both input and output in three
different possible configurations.
The three types of configurations are Common Base, Common Emitter and Common Collector
configurations. In every configuration, the emitter junction is forward biased and the collector junction
is reverse biased.
CommonBase(CB)Configuration
The name itself implies that the Base terminal is taken as common terminal for both input and output of
the transistor. The common base connection for both NPN and PNP transistors is as shown in the
following figure.
For the sake of understanding, let us consider NPN transistor in CB configuration. When the emitter
voltage is applied, as it is forward biased, the electrons from the negative terminal repel the emitter
electrons and current flows through the emitter and base to the collector to contribute collector
current. The collector voltage VCB is kept constant throughout this.
In the CB configuration, the input current is the emitter current IE and the output current is the collector
current IC.
Current Amplification Factor (𝜶)
3. TRANSISTOR CONFIGURATIONS

Amplifiers
18
The ratio of change in collector current (ΔIC) to the change in emitter current (ΔIE) when collector
voltage VCB is kept constant, is called as Current amplification factor. It is denoted by 𝜶.
𝛼 =
∆ 𝐼 𝐶
∆𝐼 𝐸
at constant 𝑉𝐶𝐵
Expression for Collector current
With the above idea, let us try to draw some expression for collector current.
Along with the emitter current flowing, there is some amount of base current IB which flows through the
base terminal due to electron hole recombination. As collector-base junction is reverse biased, there is
another current which is flown due to minority charge carriers. This is the leakage current which can be
understood as Ileakage. This is due to minority charge carriers and hence very small.
The emitter current that reaches the collector terminal is
𝜶 𝑰 𝑬
Total collector current
𝐼 𝐶 = 𝛼 𝐼 𝐸 + 𝐼𝑙𝑒𝑎𝑘𝑎𝑔𝑒
If the emitter-base voltage VEB = 0, even then, there flows a small leakage current, which can be termed
as ICBO (collector-base current with output open).
The collector current therefore can be expressed as
𝐼 𝐶 = 𝛼𝐼 𝐸 + 𝐼 𝐶𝐵𝑂
𝐼 𝐸 = 𝐼 𝐶 + 𝐼 𝐵
𝐼 𝐶 = 𝛼 (𝐼 𝐶 + 𝐼 𝐵) + 𝐼 𝐶𝐵𝑂
𝐼 𝐶 (1 − 𝛼) = 𝛼𝐼 𝐵 + 𝐼 𝐶𝐵𝑂
𝐼 𝐶 =
𝛼
1 − 𝛼
𝐼 𝐵 +
𝐼 𝐶𝐵𝑂
1 − 𝛼
𝐼 𝐶 = (
𝛼
1 − 𝛼
) 𝐼 𝐵 + (
1
1 − 𝛼
) 𝐼 𝐶𝐵𝑂
Hence the above derived is the expression for collector current. The value of collector current depends
on base current and leakage current along with the current amplification factor of that transistor in use.
Characteristics of CB configuration
 This configuration provides voltage gain but no current gain.
 Being VCB constant, with a small increase in the Emitter-base voltage VEB, Emitter
current IE gets increased.

Amplifiers
19
 Emitter Current IE is independent of Collector voltage VCB.
 Collector Voltage VCB can affect the collector current IC only at low voltages, when VEB
is kept constant.
 The input resistance ri is the ratio of change in emitter-base voltage (Δ VEB) to the
change in emitter current (ΔIE) at constant collector base voltage VCB.
𝑟𝑖 =
∆𝑉𝐸𝐵
∆𝐼 𝐸
𝑎𝑡 𝑐𝑜𝑛𝑠𝑡𝑎𝑛𝑡 𝑉𝐶𝐵
 As the input resistance is of very low value, a small value of VEB is enough to produce
a large current flow of emitter current IE.
 The output resistance ro is the ratio of change in the collector base voltage (ΔVCB) to
the change in collector current (ΔIC) at constant emitter current IE.
𝑟𝑜 =
∆𝑉𝐶𝐵
∆𝐼 𝐶
𝑎𝑡 𝑐𝑜𝑛𝑠𝑡𝑎𝑛𝑡 𝐼 𝐸
 As the output resistance is of very high value, a large change in VCB produces a very
little change in collector current IC.
 This Configuration provides good stability against increase in temperature.
 The CB configuration is used for high frequency applications.
CommonEmitter(CE)Configuration
The name itself implies that the Emitter terminal is taken as common terminal for both input and output
of the transistor. The common emitter connection for both NPN and PNP transistors is as shown in the
following figure.

Amplifiers
20
Just as in CB configuration, the emitter junction is forward biased and the collector junction is reverse
biased. The flow of electrons is controlled in the same manner. The input current is the base current IB
and the output current is the collector current IC here.
Base Current Amplification factor (𝜷)
The ratio of change in collector current (ΔIC) to the change in base current (ΔIB) is known as Base Current
Amplification Factor. It is denoted by β
𝛽 =
Δ𝐼 𝐶
Δ𝐼 𝐵
Relation between β and 𝜶
Let us try to derive the relation between base current amplification factor and emitter current
amplification factor.
𝛽 =
Δ𝐼 𝐶
Δ𝐼 𝐵
𝛼 =
Δ𝐼 𝐶
Δ𝐼 𝐸
𝐼 𝐸 = 𝐼 𝐵 + 𝐼 𝐶
∆𝐼 𝐸 = ∆𝐼 𝐵 + ∆𝐼 𝐶
∆𝐼 𝐵 = ∆𝐼 𝐸 − ∆𝐼 𝐶
We can write
𝛽 =
∆𝐼 𝐶
∆𝐼 𝐸 − ∆𝐼 𝐶
Dividing by ∆𝐼 𝐸
𝛽 =
∆𝐼 𝐶
∆𝐼 𝐸
⁄
∆𝐼 𝐸
∆𝐼 𝐸
−
∆𝐼 𝐶
∆𝐼 𝐸
We have
𝛼 =
∆𝐼 𝐶
∆𝐼 𝐸
⁄
Therefore,
𝛽 =
𝛼
1 − 𝛼

Amplifiers
21
From the above equation, it is evident that, as 𝛼 approaches 1, β reaches infinity.
Hence, the current gain in Common Emitter connection is very high. This is the reason this circuit
connection is mostly used in all transistor applications.
Expression for Collector Current
In the Common Emitter configuration, IB is the input current and IC is the output current.
We know
𝐼 𝐸 = 𝐼 𝐵 + 𝐼 𝐶
And
𝐼 𝐶 = 𝛼 𝐼 𝐸 + 𝐼 𝐶𝐵𝑂
= 𝛼 (𝐼 𝐵 + 𝐼 𝐶) + 𝐼 𝐶𝐵𝑂
𝐼 𝐶(1 − 𝛼) = 𝛼𝐼 𝐵 + 𝐼 𝐶𝐵𝑂
𝐼 𝐶 =
𝛼
1 − 𝛼
𝐼 𝐵 +
1
1 − 𝛼
𝐼 𝐶𝐵𝑂

Amplifiers
22
End of ebook preview
If you liked what you saw…
Buy it from our store @ https://store.tutorialspoint.com

Amplifiers tutorial

More Related Content

What's hot (10)

Similar to Amplifiers tutorial (20)

More from HarikaReddy115 (20)

Recently uploaded (20)

Amplifiers tutorial