Analyzing ReactOS One More Time

Analyzing ReactOS One More Time
Author: Aleksandr Chibisov
Date: 21.04.2016
ReactOS is intensively developing, and its codebase is steadily growing in size. On February 16, 2016, a
new version of the operating system was released, and we thought it was a good occasion to run it
through our static analyzer one more time. The new scan was done with PVS-Studio, version 6.02.
Introduction
I decided to try my hand at writing articles on static analysis, and for this one I picked ReactOS project.
ReactOS is a modern open-source operating system based on the principles underlying Windows NT and
Wine. The project's primary goal is to create a system fully compatible with application and device
drivers made for Windows.
We already scanned this project before. For the previous results, see the following articles:
 PVS-Studio: analyzing ReactOS's code
 Re-checking the ReactOS project - a large report
Since the last scan, the number of projects inside the solution has grown to 963.
The new analysis revealed 4027 general warnings in 5396 project files. The developers obviously paid
attention to the results of the previous scan, as the number of bugs has dropped. However, the project
keeps developing, and new errors are inevitable. That's why code analysis must be carried out regularly.
Obviously, examining all the warnings in detail is impossible, so in this article we will discuss only the
most interesting and suspicious fragments found. I'm sure I have missed some errors, not to mention
the warnings on 64-bit errors and micro-optimizations, which I haven't checked at all.
The PVS-Studio demo version is not sufficient for scanning a large project like React OS, but OOO
"Program Verification Systems" granted me a license so that I could analyze open-source projects.
Typos
PVS-Studio analyzer is good at detecting typos of all kinds, which can be easily lost in large codebases.
Let's see what we've got this time.

Value reassignment
Int xmlNanoFTPList(....)
{
....
closesocket(ctxt->dataFd); ctxt->dataFd = INVALID_SOCKET; //<-
ctxt->dataFd = INVALID_SOCKET; //<-
....
}
V519 The 'ctxt->dataFd' variable is assigned values twice successively. Perhaps this is a mistake. Check
lines: 1790, 1791. nanoftp.c 1791
There is an apparent error here that deals with assigning one and the same value to a variable in two
adjacent lines. Such errors occur when programmers ignore the code formatting rules. Ordinary code
review does not easily reveal errors of this type, as statements occupy one line and look like a single
fragment.
There's nothing bad about this error, of course; it's just a duplicate assignment. Nevertheless, it's still an
error, so I thought I should mention it.
The same error dealing with duplicate code can be found in the project a few more times:
 V519 The 'ctxt->dataFd' variable is assigned values twice successively. Perhaps this is a mistake.
Check lines: 1804, 1805. nanoftp.c 1805
 V519 The 'ctxt->dataFd' variable is assigned values twice successively. Perhaps this is a mistake.
Check lines: 1935, 1936. nanoftp.c 1936
Incorrect operator
static INT CommandDumpSector(....)
{
....
SectorCount.QuadPart = DiskGeometry.Cylinders.QuadPart *
DiskGeometry.TracksPerCylinder, //<-
DiskGeometry.SectorsPerTrack;
....
}
V521 Such expressions using the ',' operator are dangerous. Make sure the expression is correct.
cmdcons.c 430
When computing the value of a variable, the comma operator is used instead of the multiplication
operator in a fragment where several values should be multiplied. As a result, the variable is assigned
the value DiskGeometry.SectorsPerTrack while the result of multiplying the first two operands is simply
ignored. Errors like this usually occur when the same variable is used many times in several adjacent
lines and the programmer copies it together with the comma from a previous check instead of typing it
all over again.
Extra assignment
LRESULT CDeviceManager::OnNotify(_In_ LPARAM lParam)
{
....
UINT_PTR idButton = lpttt->hdr.idFrom;
switch (idButton)
{
....
}
idButton = idButton; //<-

....
}
V570 The 'idButton' variable is assigned to itself. mainwindow.cpp 546
A variable is assigned to itself. This operation occurs in one of the last lines of the function body, with all
the required operations over idButton already done, so it is either that the value was meant to be
assigned to some other global variable so that another function could continue the computations, or
that the programmer was not attentive enough and wrote an extra operation by mistake.
Errors in conditions
Various errors found in conditions result in incorrect data processing and infinite loops. Sometimes they
result in regularly processing certain code fragments that were not intended to be executed at all or
were intended to be executed only under certain conditions.
Identical operands in a condition
#define GCS_HELPTEXTA 0x00000001
#define GCS_VALIDATEA 0x00000002
#define GCS_HELPTEXTW 0x00000005
#define GCS_VALIDATEW 0x00000006
HRESULT WINAPI CDefaultContextMenu::GetCommandString(....)
{
if (uFlags == GCS_HELPTEXTA || uFlags == GCS_HELPTEXTW)
{
....
}
....
if (uFlags == GCS_VALIDATEA || uFlags == GCS_VALIDATEA) //<-
return S_OK;
....
}
V501 There are identical sub-expressions 'uFlags == 0x00000002' to the left and to the right of the '||'
operator. cdefaultcontextmenu.cpp 1793
The function works both with ordinary strings and Unicode strings, so every check is done twice. A typo
in one of the conditions causes an ordinary string to be checked twice, ignoring the corresponding
Unicode string. To fix the error, the second part of the condition needs to be changed.
The fixed code should look like this:
if (uFlags == GCS_VALIDATEA || uFlags == GCS_VALIDATEW)
return S_OK;
Idle condition
SOCKET WSPAPI
WSPAccept(....)
{
....
if (CallBack == CF_REJECT)
{
*lpErrno = WSAECONNREFUSED;
return INVALID_SOCKET;
}
else
{
*lpErrno = WSAECONNREFUSED;
return INVALID_SOCKET;

}
....
}
V523 The 'then' statement is equivalent to the 'else' statement. dllmain.c 1325
This is another kind of errors found in conditions. In the example above, the same block of statements
will be executed regardless of whether the condition is true or false. I don't know the specifics of this
code, so I can only make some assumptions about how to solve the issue. Perhaps the code blocks
should be revised, or maybe it's just that the condition should be deleted so that the code is always
executed without unnecessary checks.
Similar code fragments were found in other modules as well:
 V523 The 'then' statement is equivalent to the 'else' statement. crecyclebin.cpp 1357
 V523 The 'then' statement is equivalent to the 'else' statement. mapdesc.cc 733
 V523 The 'then' statement is equivalent to the 'else' statement. pattern.c 2058
 V523 The 'then' statement is equivalent to the 'else' statement. console.c 143
Logical error
HDEVINFO WINAPI SetupDiGetClassDevsExW(....)
{
....
if (flags & DIGCF_ALLCLASSES)
{
....
}
else if (!IsEqualIID(&list->ClassGuid, &GUID_NULL))//<-
{
if (IsEqualIID(&list->ClassGuid, &GUID_NULL)) //<-
pClassGuid = &list->ClassGuid;
....
}
....
}
V637 Two opposite conditions were encountered. The second condition is always false. Check lines:
2532, 2535. devinst.c 2532
Diagnostic V637 triggered by this code indicates the presence of an unreasonable condition. If the first
condition is true, the second will always be false, and the corresponding code block will never get
control anyway. It is an example of redundant code.
Another diagnostic revealed a similar defect:
static int xmlStreamCompile(xmlPatternPtr comp) {
....
case XML_OP_ELEM:
....
if ((comp->nbStep == i + 1) && //<-
(flags & XML_STREAM_STEP_DESC))
{
if (comp->nbStep == i + 1) { //<-
stream->flags |= XML_STREAM_FINAL_IS_ANY_NODE;
}
}
....
}

V571 Recurring check. The 'comp->nbStep == i + 1' condition was already verified in line 1649. pattern.c
1655
The second check will always evaluate to true and is not necessary, as this code will get control
independently of it.
Redundant expression
PVOID NTAPI RtlLookupElementGenericTableFull(....)
{
....
/* Check if we found anything */
if ((*SearchResult == TableEmptyTree) ||
(*SearchResult != TableFoundNode))
{
return NULL;
}
....
}
V590 Consider inspecting this expression. The expression is excessive or contains a misprint.
generictable.c 278
The fragment above contains a check with one extra expression. If the first expression is true, the
second won't be checked. But if the second expression does get checked, it will also evaluate to true.
Therefore, checking only the second expression is enough, so the code should be simplified as follows:
if (*SearchResult != TableFoundNode)
{
return NULL;
}
Unused function result
#define IOleInPlaceSite_GetWindow(This,phwnd)
( (This)->lpVtbl -> GetWindow(This,phwnd) )
static void create_shell_embedding_hwnd(WebBrowser *This)
{
HWND parent = NULL;
....
if(SUCCEEDED(hres)) {
IOleInPlaceSite_GetWindow(inplace, &parent); //<-
IOleInPlaceSite_Release(inplace);
}
....
}
V530 The return value of function 'GetWindow' is required to be utilized. oleobject.c 113
The function in the code above looks for a certain window in relation to the inplace window, but
regardless of whether or not the window is found, invoking this function makes no sense because its
result is not used anywhere.
The same error can be found in one more place:
V530 The return value of function 'GetWindow' is required to be utilized. oleobject.c 185
Suspicious loop
FF_T_SINT32 FF_BlockRead(....) {

FF_T_SINT32 slRetVal = 0;
....
if(pIoman->pBlkDevice->fnpReadBlocks)
{
....
slRetVal = pIoman->pBlkDevice->fnpReadBlocks(pBuffer,
ulSectorLBA, ulNumSectors, pIoman->pBlkDevice->pParam);
....
if(FF_GETERROR(slRetVal) == FF_ERR_DRIVER_BUSY) {
FF_Sleep(FF_DRIVER_BUSY_SLEEP);
}
} while(FF_GETERROR(slRetVal) == FF_ERR_DRIVER_BUSY); //<-
return slRetVal;
}
This time, a single anomaly triggered three different warnings at once:
 V712 Be advised that compiler may delete this cycle or make it infinity. Use volatile variable(s)
or synchronization primitives to avoid this. ff_ioman.c 539
 V715 The 'while' operator has empty body. Suspicious pattern detected: 'if (expr) {...} while
(expr);'. ff_ioman.c 539
 V547 Expression '(slRetVal & 0x0000FFFF) == - 10' is always false. ff_ioman.c 539
A condition is followed by a bodyless loop whose conditional expression will always evaluate to false, so
the loop won't iterate even once. I don't know what exactly this code was meant to do, but my guess is
that it is a do .... while sequence with the do statement accidentally omitted.
The analyzer found one more instance of the same code:
 V712 Be advised that compiler may delete this cycle or make it infinity. Use volatile variable(s)
or synchronization primitives to avoid this. ff_ioman.c 564
 V715 The 'while' operator has empty body. Suspicious pattern detected: 'if (expr) {...} while
(expr);'. ff_ioman.c 564
 V547 Expression '(slRetVal & 0x0000FFFF) == - 10' is always false. ff_ioman.c 564
Incorrect function argument
void UpdateStatusBar(void)
{
TCHAR szStatusText[128];
....
ZeroMemory(szStatusText,
sizeof(szStatusText) / sizeof(TCHAR)); //<-
....
}
V575 Buffer's size in bytes should be passed to the 'memset' function as the third argument instead of
the number of processed elements. solitaire.cpp 153
The ZeroMemory function fills the block of memory allocated for an array with zeroes. In our example,
the function receives, as an argument, the actual number of array elements instead of the size of the
block to be cleared, which mistake results in zeroing only part of the target memory block. To fix this
error, the code should be modified as follows:
ZeroMemory(szStatusText,
sizeof(szStatusText));

Potential null-pointer dereferencing
The analyzer reported quite a lot of code fragments that deal with a situation when a pointer is first
used and only then is tested for null. Such code works well until a null pointer is encountered.
NET_API_STATUS WINAPI NetUserEnum(....)
{
done:
if (ApiStatus == NERR_Success &&
EnumContext->Index < EnumContext->Count) //<-
ApiStatus = ERROR_MORE_DATA;
if (EnumContext != NULL) //<-
*totalentries = EnumContext->Count;
}
V595 The 'EnumContext' pointer was utilized before it was verified against nullptr. Check lines: 2557,
2560. user.c 2557
The authors have fixed a lot of errors of this type since the last scan. However, a lot of new ones also
appeared, so it's just another good argument for using static analysis regularly.
Here is a complete list of diagnostic messages for this bug pattern in ReactOS:
 V595 The 'EnumContext' pointer was utilized before it was verified against nullptr. Check lines:
1166, 1169. local_group.c 1166
 V595 The 'GuiData' pointer was utilized before it was verified against nullptr. Check lines: 1458,
1465. conwnd.c 1458
 V595 The 'PartitionList->CurrentPartition' pointer was utilized before it was verified against
nullptr. Check lines: 1653, 1656. usetup.c 1653
 V595 The 'PolicyAccountDomainInfo' pointer was utilized before it was verified against nullptr.
Check lines: 255, 258. sidcache.c 255
 V595 The 'PropertySheetHeader' pointer was utilized before it was verified against nullptr.
Check lines: 1176, 1180. devclass.c 1176
 V595 The 'This->pITextStoreACP' pointer was utilized before it was verified against nullptr.
Check lines: 127, 131. context.c 127
 V595 The 'addr' pointer was utilized before it was verified against nullptr. Check lines: 2110,
2113. builtin.c 2110
 V595 The 'argv' pointer was utilized before it was verified against nullptr. Check lines: 354, 358.
rundll32.c 354
 V595 The 'context' pointer was utilized before it was verified against nullptr. Check lines: 93, 98.
texture.c 93
 V595 The 'driverInfo' pointer was utilized before it was verified against nullptr. Check lines: 211,
227. driver.c 211
 V595 The 'ds' pointer was utilized before it was verified against nullptr. Check lines: 257, 262.
main.cpp 257
 V595 The 'ds' pointer was utilized before it was verified against nullptr. Check lines: 303, 308.
main.cpp 303
 V595 The 'entry' pointer was utilized before it was verified against nullptr. Check lines: 431, 440.
cmenufocusmanager.cpp 431
 V595 The 'entry' pointer was utilized before it was verified against nullptr. Check lines: 572, 575.
cursoricon.c 572
 V595 The 'lpszTemp' pointer was utilized before it was verified against nullptr. Check lines: 1167,
1170. taskmgr.c 1167

 V595 The 'm_shellPidl' pointer was utilized before it was verified against nullptr. Check lines:
748, 749. ntobjfolder.cpp 748
 V595 The 'm_shellPidl' pointer was utilized before it was verified against nullptr. Check lines:
803, 804. regfolder.cpp 803
 V595 The 'new_env' pointer was utilized before it was verified against nullptr. Check lines: 432,
450. env.c 432
 V595 The 'pFM2' pointer was utilized before it was verified against nullptr. Check lines: 617, 627.
regsvr.c 617
 V595 The 'pPatterns' pointer was utilized before it was verified against nullptr. Check lines: 497,
518. info.c 497
 V595 The 'pServiceStatus' pointer was utilized before it was verified against nullptr. Check lines:
194, 200. query.c 194
 V595 The 'pTLib' pointer was utilized before it was verified against nullptr. Check lines: 7863,
7865. typelib.c 7863
 V595 The 'patterns' pointer was utilized before it was verified against nullptr. Check lines: 1747,
1768. info.c 1747
 V595 The 'pcFetched' pointer was utilized before it was verified against nullptr. Check lines: 211,
216. mediatype.c 211
 V595 The 'pcchOut' pointer was utilized before it was verified against nullptr. Check lines: 2248,
2250. url.c 2248
 V595 The 'pidlChild' pointer was utilized before it was verified against nullptr. Check lines: 162,
183. shlfolder.cpp 162
 V595 The 'plpOptions[curStream]' pointer was utilized before it was verified against nullptr.
Check lines: 1603, 1604. api.c 1603
 V595 The 'ppszNames' pointer was utilized before it was verified against nullptr. Check lines:
238, 245. find.c 238
 V595 The 'ppszNames' pointer was utilized before it was verified against nullptr. Check lines:
464, 485. find.c 464
 V595 The 'prbel' pointer was utilized before it was verified against nullptr. Check lines: 226, 244.
recyclebin.c 226
 V595 The 'psp' pointer was utilized before it was verified against nullptr. Check lines: 2718,
2727. propsheet.c 2718
 V595 The 'pszList' pointer was utilized before it was verified against nullptr. Check lines: 613,
630. dialogs.cpp 613
 V595 The 'subtypeinfo' pointer was utilized before it was verified against nullptr. Check lines:
5559, 5564. typelib.c 5559
 V595 The 'typeInfo' pointer was utilized before it was verified against nullptr. Check lines: 943,
945. typelib.c 943
 V595 The 'user_dirids' pointer was utilized before it was verified against nullptr. Check lines:
192, 203. dirid.c 192
 V595 The 'wki' pointer was utilized before it was verified against nullptr. Check lines: 129, 133.
netid.c 129
netid.c 163
netid.c 299
 V595 The 'Globals.win_list' pointer was utilized before it was verified against nullptr. Check
lines: 542, 564. winhelp.c 542

 V595 The 'NewSubsystem' pointer was utilized before it was verified against nullptr. Check lines:
501, 503. smsubsys.c 501
 V595 The 'This->doc_host' pointer was utilized before it was verified against nullptr. Check lines:
834, 847. shellbrowser.c 834
 V595 The 'atom->ranges' pointer was utilized before it was verified against nullptr. Check lines:
817, 818. xmlregexp.c 817
 V595 The 'attr' pointer was utilized before it was verified against nullptr. Check lines: 2860,
2864. xmlschemas.c 2860
 V595 The 'atts' pointer was utilized before it was verified against nullptr. Check lines: 8640,
8649. parser.c 8640
 V595 The 'compiland' pointer was utilized before it was verified against nullptr. Check lines: 294,
301. symbol.c 294
 V595 The 'compiland' pointer was utilized before it was verified against nullptr. Check lines: 494,
499. symbol.c 494
 V595 The 'compress_formats[i].guid' pointer was utilized before it was verified against nullptr.
Check lines: 946, 950. jpegformat.c 946
 V595 The 'converter' pointer was utilized before it was verified against nullptr. Check lines:
2319, 2324. info.c 2319
 V595 The 'ctx->myDoc' pointer was utilized before it was verified against nullptr. Check lines:
13108, 13111. parser.c 13108
 V595 The 'ctxt' pointer was utilized before it was verified against nullptr. Check lines: 1130,
1131. xinclude.c 1130
 V595 The 'ctxt->incTab[nr]' pointer was utilized before it was verified against nullptr. Check
lines: 1420, 1429. xinclude.c 1420
 V595 The 'ctxt->input' pointer was utilized before it was verified against nullptr. Check lines:
11364, 11367. parser.c 11364
6734, 6738. htmlparser.c 6734
6802, 6810. parser.c 6802
6864, 6872. parser.c 6864
 V595 The 'ctxt->myDoc' pointer was utilized before it was verified against nullptr. Check lines:
13667, 13683. parser.c 13667
 V595 The 'ctxt->myDoc' pointer was utilized before it was verified against nullptr. Check lines:
819, 831. sax2.c 819
 V595 The 'ctxt->nsTab' pointer was utilized before it was verified against nullptr. Check lines:
1590, 1597. parser.c 1590
 V595 The 'current_line' pointer was utilized before it was verified against nullptr. Check lines:
558, 563. edit.c 558
 V595 The 'depth_stencil' pointer was utilized before it was verified against nullptr. Check lines:
348, 351. device.c 348
 V595 The 'device->hwbuf' pointer was utilized before it was verified against nullptr. Check lines:
909, 919. mixer.c 909
 V595 The 'es' pointer was utilized before it was verified against nullptr. Check lines: 5284, 5300.
edit.c 5284
 V595 The 'formats[i].guid' pointer was utilized before it was verified against nullptr. Check lines:
1416, 1420. pngformat.c 1416

1562, 1566. tiffformat.c 1562
166, 170. bmpencode.c 166
 V595 The 'func' pointer was utilized before it was verified against nullptr. Check lines: 373, 376.
symbol.c 373
 V595 The 'lpFindInfo' pointer was utilized before it was verified against nullptr. Check lines:
6310, 6314. listview.c 6310
 V595 The 'lpItem' pointer was utilized before it was verified against nullptr. Check lines: 4223,
4248. listview.c 4223
 V595 The 'lpNumberOfBytesRead' pointer was utilized before it was verified against nullptr.
Check lines: 150, 180. rw.c 150
 V595 The 'lpiID' pointer was utilized before it was verified against nullptr. Check lines: 343, 364.
exticon.c 343
 V595 The 'lpszCommandLine' pointer was utilized before it was verified against nullptr. Check
lines: 283, 288. crtexe.c 283
 V595 The 'lpwh' pointer was utilized before it was verified against nullptr. Check lines: 1374,
1388. ftp.c 1374
 V595 The 'lpwszComponent' pointer was utilized before it was verified against nullptr. Check
lines: 1465, 1468. internet.c 1465
 V595 The 'lpwszConnectionName' pointer was utilized before it was verified against nullptr.
Check lines: 1256, 1258. internet.c 1256
 V595 The 'name' pointer was utilized before it was verified against nullptr. Check lines: 125, 133.
hash.c 125
 V595 The 'oldctxt' pointer was utilized before it was verified against nullptr. Check lines: 13444,
13448. parser.c 13444
 V595 The 'oldctxt' pointer was utilized before it was verified against nullptr. Check lines: 13675,
13693. parser.c 13675
 V595 The 'optarg' pointer was utilized before it was verified against nullptr. Check lines: 645,
646. tnconfig.cpp 645
 V595 The 'pData' pointer was utilized before it was verified against nullptr. Check lines: 239,
255. clipboard.c 239
 V595 The 'pMapper' pointer was utilized before it was verified against nullptr. Check lines: 938,
965. createdevenum.c 938
 V595 The 'pThis' pointer was utilized before it was verified against nullptr. Check lines: 1368,
1375. atlwin.h 1368
 V595 The 'pThis' pointer was utilized before it was verified against nullptr. Check lines: 1550,
1557. atlwin.h 1550
 V595 The 'param' pointer was utilized before it was verified against nullptr. Check lines: 535,
537. effect.c 535
Uninitialized variables
static HRESULT parse_canonicalize(....)
{
const WCHAR **pptr;
....
if(uri->scheme_start > -1 && uri->path_start > -1) {
ptr = uri->canon_uri+uri->scheme_start+uri->scheme_len+1;
pptr = &ptr;
}

reduce_path = !(flags & URL_DONT_SIMPLIFY) &&
ptr && check_hierarchical(pptr);
}
V614 Potentially uninitialized pointer 'pptr' used. Consider checking the first actual argument of the
'check_hierarchical' function. uri.c 6838
If the condition is found to be false, the pptr variable will remain uninitialized by the time the
check_hierarchical function is invoked.
Similar errors were found in several other fragments:
 V614 Potentially uninitialized pointer 'name' used. Consider checking the third actual argument
of the 'disp_get_id' function. engine.c 928
 V614 Potentially uninitialized pointer 'name_str' used. Consider checking the first actual
argument of the 'jsstr_release' function. engine.c 929
 V614 Potentially uninitialized pointer 'FileHandle' used. Consider checking the first actual
argument of the 'CloseHandle' function. dosfiles.c 402
 V614 Potentially uninitialized pointer 'FileHandle' used. Consider checking the first actual
argument of the 'CloseHandle' function. dosfiles.c 482
 V614 Potentially uninitialized pointer 'pwszClsid' used. Consider checking the third actual
argument of the 'RegGetValueW' function. cfsfolder.cpp 1666
 V614 Potentially uninitialized pointer 'FilePart' used. smutil.c 405
Bitwise comparison
typedef enum CorTokenType
{
mdtModule = 0x00000000,
mdtTypeRef = 0x01000000,
....
mdtModuleRef = 0x1a000000,
mdtTypeSpec = 0x1b000000,
mdtAssembly = 0x20000000,
mdtAssemblyRef = 0x23000000,
....
} CorTokenType;
#define TypeFromToken(tk) ((ULONG32)((tk) & 0xff000000))
#define TableFromToken(tk) (TypeFromToken(tk) >> 24)
static inline ULONG get_table_size(....)
{
INT tables;
....
tables = max(
assembly->tables[TableFromToken(mdtModule)].rows, //<-
assembly->tables[TableFromToken(mdtModuleRef)].rows);
....
}
V616 The '(mdtModule)' named constant with the value of 0 is used in the bitwise operation. assembly.c
156
In the example above, bitwise comparison is done over a constant that is initially a zero. Therefore, this
operation makes no sense as it produces a null value all the time.

Conclusion
ReactOS is a constantly developing project, and like any other such project, it tends to accumulate a
large number of errors. Regular static analysis by PVS-Studio will help reveal not only already existing
bugs but also suspicious fragments that may become bugs later.

Analyzing ReactOS One More Time

More Related Content

What's hot (20)

Similar to Analyzing ReactOS One More Time (20)

Recently uploaded (20)

Analyzing ReactOS One More Time