Apostila de inglês instrumental com textos complementares
58 likes50,016 views
This document provides an overview of instrumental English, including its history and methodology. It discusses how instrumental English focuses on developing reading skills for specific purposes through the use of authentic texts and reading strategies, rather than oral communication. Key aspects covered include the origins and development of instrumental English in Brazil, how it functions by addressing students' academic and professional needs, and sample chapter headings about reading techniques and strategies.
![ETEC José Rocha Mendes
3.3 Dictionary
O uso de um dicionário ajuda muito na compreensão de um texto. Contudo, devemos evitar algumas coisas. Primeiro, não se faz tradução literal, por não ser o nosso objetivo. Segundo, deve ser utilizado caso se desconheça
totalmente a palavra e não se consiga usar as técnicas apresentadas acima, devendo contextualizar a palavra.
Exemplo:
“A fallacy is a kind of error in reasoning. The alphabetical list below contains 176 names of the most common
fallacies, and it provides explanations and examples of each of them. Fallacies should not be persuasive, but
they often are. Fallacies may be created unintentionally, or they may be created intentionally in order to deceive
other people. The vast majority of the commonly identified fallacies involve arguments, although some involve
explanations, or definitions, or other products of reasoning.”
Se fossemos, por exemplo, pesquisar a definição da palavra “be”, segundo o dicionário Michaelis, teríamos:
be
[bi:] v aux (ps was, pl were, pp been). 1 ser, existir, viver, ser realidade. it is mine, his /
é meu, seu. it is my father’s / pertence a meu pai. she is everything to me / ela é tudo para
mim. 2 ter lugar, acontecer, realizar-se. when is it to be? / quando será? 3 permanecer, ficar,
continuar. 4 igualar, representar, significar. 5 estar, encontrar-se. to be at work / estar no
trabalho. to be busy / estar ocupado. to be careful / ser cuidadoso. to be in a hurry / estar
com pressa. he is at the advanced group / ele é do grupo dos adiantados. � visitar. • interj
6
be! seja!
Excluindo algumas expressões, como saber o sentido correto dessa palavra?
Lendo atentamente, com um pouco de calma, chega-se ao verbo “ser” e completa-se o sentido.
Isso ressalta a importância do contexto em toda e qualquer leitura de inglês instrumental, pois é através dela, na
maioria das vezes, que se chega ao significado de palavras que desconhecemos e que nos deixaria em dúvidas
quando formos atrás dela no dicionário.
3.3.1 Como usar um dicionário
A primeira regra fundamental sobre o uso do dicionário na leitura é que ele deve ser usado esporadicamente.
Na leitura tradicional, com texto impresso em papel, a consulta feita ao dicionário é extremamente obstrutiva. O
leitor precisa interromper totalmente a leitura, mover-se para um outro texto e iniciar um outro tipo de leitura,
geralmente precedida de uma busca em várias páginas, até achar a palavra que procura, num verbete com maior
ou menor grau de complexidade. Lido o verbete, faz a viagem de volta ao texto original, onde vai ter que se localizar novamente, provavelmente relendo partes do texto até o ponto onde ocorreu a interrupção. A consulta ao
dicionário, portanto, só é aceita como último recurso, quando todas as demais estratégias de construção do sentido
falharem.
Existe também a questão do tipo de dicionário. Deixando de lado os dicionários especializados, como aqueles
voltados para áreas específicas de conhecimento (dicionários estatísticos, filosóficos, etimológicos, ortográficos,
regionais, de termos porto-alegrenses, etc.), temos basicamente quatro tipos: (1) dicionário monolíngüe, voltado
para as necessidades dos falantes nativos, com ênfase nas palavras menos freqüentes ou acepções mais raras; (2)
dicionário bilíngüe, com uma preocupação maior nas palavras mais freqüentes e expressões idiomáticas pelos
problemas de polissemia que podem apresentar; (3) dicionário de aprendizagem, com inúmeros exemplos de
uso da língua, e que servem tanto para atividades de leitura como de produção textual; e finalmente (4) os dicionários mistos, que reúnem as características do bilíngüe e do dicionário de aprendizagem. Um exemplo deste](https://image.slidesharecdn.com/apostiladeinglsinstrumental-comtextoscomplementares-140128025256-phpapp01/85/Apostila-de-ingles-instrumental-com-textos-complementares-16-320.jpg)
Apostila de inglês instrumental com textos complementares
- 1. ETEC José Rocha Mendes
- 2. Contents CAPÍTULO 1 1.0 O QUE É INGLÊS INSTRUMENTAL? 1.2 Como funciona o inglês instrumental CAPÍTULO 2 2.0 Falsos Cognatos (False Friends) Exercises 2.1 Ambigüidade Lexical Exercises CAPÍTULO 3 3.0 Técnicas de Leitura 3.1 Instrumental Prediction 3.2 Typographical Evidences Exercises 3.3 Dictionary 3.3.1 Como usar um dicionário Verbos 3.4 Repeated Words CAPÍTULO 4 4.0 Estratégias de Leitura 4.1 Skimming 4.2 Scanning 4.2.1 Keywords (palavras-chave) 4.2.2 Mapa Mental 4.2.3 Anotações 4.3 Buscando informações específicas Exercise ETEC José Rocha Mendes 3 3 4 5 5 8 9 11 12 12 12 13 14 16 16 17 18 21 21 21 26 26 26 26 27 28
- 3. ETEC José Rocha Mendes CAPÍTULO 1 1.0 O QUE É INGLÊS INSTRUMENTAL? O inglês instrumental consiste, como a própria palavra denota, no treinamento instrumental dessa língua. É também conhecido como Inglês para Fins Específicos e tem como objetivo principal capacitar o aluno, num período relativamente curto, a ler e compreender o essencial para o desempenho de determinada atividade. O arcabouço metodológico no qual o ensino de inglês instrumental está fundamentado é em boa parte resultado de mais de vinte anos de pesquisas realizadas pelo Conselho Britânico com apoio do Ministério da Educação e colaboração de lingüistas ingleses e brasileiros, principalmente da Universidade de São Paulo (USP) e da Pontifícia Universidade Católica de São Paulo (PUC-SP). Como destaca o Professor Décio Torres Cruz no seu artigo intitulado “Ensino/aprendizagem de inglês instrumental na universidade”, publicado na Revista New Routes, número 15, de outubro de 2001, é indiscutível a importância do conhecimento da língua inglesa nos cursos universitários atuais. Considerando a competitividade do mercado e a necessidade de atualização constante de informações científicas e tecnológicas e as dificuldades das traduções de artigos, livros e outras publicações em tempo hábil, ou seja, com a mesma velocidade em que são escritas, as universidades resolveram mudar o enfoque do ensino de inglês como língua estrangeira, passando do estudo sistemático de vocabulário e regras gramaticais para um estudo mais abrangente de textos autênticos retirados das próprias fontes de informação. Essa nova forma de ler textos em inglês envolve estratégias de leitura, tais como: fazer previsões do conteúdo do texto a partir da análise de títulos, gráficos e ilustrações e do acionamento do conhecimento de mundo e conhecimento prévio do assunto pelo leitor, concentrar a atenção nas palavras cognatas e deduzir o significado de palavras desconhecidas a partir do contexto, procurar informações específicas ou fazer uma leitura rápida para verificar a idéia central do texto sem se preocupar com o conhecimento isolado de cada palavra ou com vocábulos desconhecidos, etc. Denominado de inglês instrumental, essa nova abordagem geralmente não inclui o estudo da língua falada, somente a escrita, já que o seu objetivo primordial é preparar os alunos para a habilidade da leitura e não para a comunicação oral. Os resultados têm sido eficazes onde esta metodologia tem sido empregada. 1.1 Breve história do ensino do inglês instrumental no Brasil Segundo o Professor Décio Torres Cruz, historicamente o enfoque dado à leitura dentro do processo de ensinoaprendizagem de língua estrangeira tem variado de acordo com a corrente metodológica em voga. Até o final da década de 40, esse processo estava centrado na leitura e tinha por base o método do ensino da gramática e da tradução. A partir e por causa da Segunda Guerra Mundial, desenvolveu-se o método audio-lingual baseado nas teorias behavioristas em voga na época, com o propósito de ensinar línguas européias aos soldados americanos que partiam para o campo de batalha. Com o desenvolvimento desse método, a leitura foi praticamente ignorada, tendo sido, inclusive, considerada prejudicial à aquisição de uma boa pronúncia quando apresentada ao aprendiz antes que este tivesse adquirido fluência oral. O objetivo da leitura era o domínio de habilidades e fatos isolados através da decodificação mecânica de palavras e da memorização pela repetição. O aprendiz possuía um papel passivo, de um instrumento receptor de conhecimentos vindo de fontes externas. Com o desenvolvimento das ciências cognitivas, essa idéia foi aos poucos sendo reavaliada. Os objetivos da leitura passam a ser a construção de significados e o aprendizado auto-regulado. O processo de leitura é concebido como uma interação entre o leitor, o texto, e o contexto; o leitor passa a ser visto como um sujeito ativo, um bom usuário de estratégias e um aprendiz cognitivo. Com base nesses pressupostos, os pesquisadores de leitura acreditam que o significado não está contido nas palavras na página. O leitor constrói significados, fazendo inferências e interpretações. A informação é armazenada na memória de longo-prazo em estruturas de conhecimento organizadas. A essência da aprendizagem constitui em ligar novas
- 4. ETEC José Rocha Mendes informações ao conhecimento prévio sobre o tópico, a estrutura ou o gênero textual e as estratégias de aprendizagem. A construção de significados depende, em parte, da metacognição, da habilidade do leitor de refletir e controlar o processo de aprendizagem (planejar, monitorar a compreensão, e revisar os usos das estratégias e da compreensão); e das suas crenças sobre desempenho, esforço e responsabilidade. A leitura vem, justificadamente, readquirindo posição de destaque no ensino de línguas: ela é fonte de diversos tipos de informação sobre a língua estrangeira, o povo que a fala e sua cultura, além de ser o contexto ideal para a apreensão de vocabulário e sintaxe em contextos significativos, permitindo ao aprendiz mais tempo para a resolução de problemas e a assimilação das novas informações apresentadas. A leitura, portanto, é fundamental ao aperfeiçoamento das demais habilidades e à expansão do conhecimento. Assim, o número de estudos sobre a leitura e os seus múltiplos aspectos cresceu muito nas últimas décadas, principalmente após os desenvolvimentos da análise do discurso. Nessa linha, destacam-se os estudos centrados na aquisição e no processamento da leitura, na teoria de esquemas e nas estratégias de leitura para o uso instrumental da língua. O Inglês Instrumental surgiu no final da década de 70 a partir da demanda feita aos departamentos de Letras Anglo-Germânicas ou de Línguas Modernas por cursos de inglês especializados para vários departamentos de ciências pura e aplicada. Originalmente, o Inglês Instrumental foi concebido e conhecido internacionalmente como “ESP” (English for Specific Purposes, ou seja, “Inglês para Propósitos Específicos”), onde a finalidade da leitura era direcionada para as diferentes áreas de atuação do aluno, e era geralmente voltada para ciência e tecnologia. Em algumas universidades, essa disciplina era oferecida como Inglês Técnico. O objetivo era a leitura, interpretação e compreensão de textos e não a conversação ou tradução integral dos textos estudados. Com o passar do tempo, a técnica ESP passou a ser denominada de Inglês Instrumental e adquiriu um enfoque mais geral naquilo que se refere à escolha dos textos por área específica. Vem sendo utilizado não só em universidades, mas também em escolas técnicas, em cursos preparatórios para leitura de textos de vestibular, de concursos públicos, em algumas escolas de primeiro e segundo graus e também em cursos preparatórios para candidatos à seleção aos cursos de Mestrado e Doutorado. 1.2 Como funciona o inglês instrumental A metodologia do inglês instrumental tem como premissa básica levar o aluno a descobrir suas necessidades acadêmicas e profissionais dentro de um contexto autêntico, oriundo do mundo real. Portanto, o curso típico de inglês instrumental é elaborado a partir do levantamento de situações em que o conhecimento específico da língua inglesa permite ao aluno desempenhar melhor uma função lingüística específica. No caso do funcionário que lida com clientes estrangeiros, para poder orientá-los devidamente, esse funcionário necessitará conhecer suficientemente ou o idioma nativo do cliente ou um terceiro idioma (geralmente uma lingua franca de projeção mundial como o inglês ou o espanhol) que o cliente também fale. Com o conhecimento básico dessa língua e a prática do vocabulário específico, o funcionário poderá se comunicar e fazer um atendimento significantemente melhor do que se o mesmo não tivesse esse conhecimento lingüístico. Profissionais que trabalham com relatórios, pareceres, manuais, artigos e textos em língua estrangeira aprendem estratégias para facilitar a leitura e compreensão, sem que seja necessária a tradução na íntegra. Pesquisas demonstram que o ensino de uma língua estrangeira orientada para o desenvolvimento de habilidades específicas tem apresentado excelentes resultados. Aumenta a motivação do aluno pelo rápido aprendizado, tornando-o auto-suficiente para o desempenho de suas funções e incentivando-o a buscar o seu próprio desenvolvimento e aperfeiçoamento.
- 5. ETEC José Rocha Mendes CAPÍTULO 2 2.0 Falsos Cognatos (False Friends) Também chamados de falsos amigos, os falsos cognatos são palavras normalmente derivadas do latim, aparecendo em diferentes idiomas com ortografia semelhante, mas que ao longo dos tempos acabaram adquirindo significados diferentes. Essas palavras causam confusão nos estudantes de qualquer língua estrangeira, fazendo com que os mesmos façam analogias com palavras parecidas em língua portuguesa, induzindo ao erro. Mas não existe nenhum motivo real para se preocupar com os falsos cognatos. Eles correspondem a uma parcela mínima das palavras em inglês. Contudo, procure não acreditar em “fórmulas mágicas” para se aprender as palavras via cognatos. A seguir, uma tabela para facilitar o reconhecimento dos falsos cognatos. EM INGLÊS ACTUAL SIGNIFICA EM PORTUGUÊS REAL MAS PARECE SER ATUAL ACTUALLY ADVERTISE ALUMNUS NA VERDADE ANÚNCIO EX-ALUNO ATUALMENTE ADVERTIR ALUNO AMASS APPLICATION APPOINTMENT ARGUMENT ASSIST ACUMULAR INSCRIÇÃO HORA MARCADA DISCUSSÃO AJUDAR AMASSAR APLICAÇÃO APONTAMENTO ARGUMENTO ASSISTIR ATTEND FREQUENTAR ATENDER AUDIENCE AVAILABLE BALCONY BARRACS BATON BEEF PLATÉIA, PÚBLICO DISPONÍVEL SACADA QUARTEL BATUTA, CACETETE CARNE DE GADO AUDIÊNCIA AVALIAR BALCÃO BARRACA BATOM BIFE BOND CAFETERIA LAÇO, LIGAÇÃO REFEITÓRIO BUNDE CAFETERIA CAMERA CARTON CASUALTY CIGAR COLLAR COLLEGE COMMODITY MÁQ. FOTOGRÁFICA CAIXA DE PAPELÃO FATALIDADE CHARUTO GOLA, COLARINHO FACULDADE ARTIGO, MERCADORIA CÂMARA CARTÃO CASUALIDADE CIGARRO COLAR COLÉGIO COMODIDADE COMPASS COMPETITION BÚSSOLA CONCORRÊNCIA COMPASSO COMPETIÇÃO COMPREHENSIVE COMPLETO, TOTAL CONDUCTOR COBRADOR COMPETIÇÃO, CONCURCONTEST SO CONVENIENT PRÁTICO CONVICT CONDENADO COSTUME ROUPA, FANTASIA DATA DADOS, INFORMAÇÕES COMPREENSIVO CONDUTOR DECEPTION DECEPÇÃO LOGRO, FRAUDE CONTEXTO CONVENIENTE CONVICTO COSTUME DATA QUE EM INGLÊS É PRESENT NOWADAYS, TODAY WARN PUPIL WRINKLE, DENT, CRUSH INVESTMENT NOTE REASONING ATTEND ANSWER, SERVE COURT APPEARENCE EVALUATE COUNTER HUT, TENT LIPSTICK STEAK STREERCAR, TRAM COFFEE SHOP CHAMBER, TUBE CARD CASUALLNESS CIGARETTE NECKLACE HIGH SCHOOL COMFORT A PAIR OF COMPASSES CONTEST UNDERSTANDING DRIVER CONTEXT APPROPRIATE CERTAIN CUSTOM, HABIT DATE DISAPPOINTMENT
- 6. ETEC José Rocha Mendes DECORATE DEFENDANT DESIGN DISGUST DIVERT EDITOR EDUCATED EMISSION ENROLL ESTATE EXCITING EXIT EXPERT EXQUISITE FABRIC FAMILIAR FILE GRIP INCOME TAX RETURN INGENIOUS INGENUITY INJURY INSCRIPTION INTEND INTOXICATION INTRODUCE JOURNAL JUST LAMP LARGE LECTURE LEGEND LIBRARY LUNCH LUXURY MAGAZINE MANAGE MAYOR MOISTURE MOROSE NOTICE NOVEL OFFICE ORDINARY ORE PARENTS PARTICULAR PASTA PHYSICIAN POLICY PORT PORTER PREJUDICE PRESCRIBE PRESENTLY PRETEND PREVENT PROCURE DECORAR(ORNAMENTAR) RÉU PROJETO, CRIAÇÃO, ESTILO NÁUSEA DESVIAR REDATOR INSTRUÍDO DESCARGA ALISTAR-SE PROPRIEDADE, IMÓVEL EMPOLGANTE SAÍDA PERITO APURADO TECIDO DECORAR(SABER DE COR) DEFENDER MEMORIZE DEFEND DESIGNAR DESGOSTO DIVERTIR EDITOR EDUCADO EMISSÃO ENROLAR ESTADO EXCITANTE ÊXITO ESPERTO ESQUISITO FÁBRICA CONHECIDO ARQUIVO AGARRAR FIRME DECLARAÇÃO DE IMPOSTO DE RENDA CRIATIVO, ENGENHOSO ENGENHOSIDADE FERIMENTO RAVAÇÃO EM RELEVO PRETENDER EMBRIAGUEZ APRESENTAR PERIÓDICO NUM DADO MOMENTO, APENAS LUMINÁRIA GRANDE PALESTRA LENDA BIBLIOTECA ALMOÇO LUXO FAMILIAR FILA GRIPE DEVOLUÇÃO DE IMPOSTO DE RENDA INGÊNUO INGENUIDADE INJÚRIA INSCRIÇÃO ENTENDER INTOXICAÇÃO INTRODUZIR JORNAL JUSTO(APERTADO - DE JUSTEZA) LÂMPADA LARGO LEITURA LEGENDA LIVRARIA LANCHE LUXÚRIA APPOINT GRIEF ENJOY PUBLISHER POLITE ISSUE CURL STATE THRILLING SUCCESS SMART WEIRD FACTORY MEMBER OF THE FAMILY LINE, QUEUE COLD INCOME TAX REFUND NAIVE NAIVETY INSULT APPLICATION UNDERSTAND POISONING INSERT NEWSPAPER REVISTA ADMINISTRAR, CONSEGUIR PREFEITO UMIDADE RABUGENTO PERCEBER ROMANCE ESCRITÓRIO COMUM MINÉRIO PAIS ESPECÍFICO MASSA MÉDICO POLÍTICA, NORMA PORTO CARREGADOR PRECONCEITO RECEITAR LOGO, EM BREVE FINGIR IMPEDIR CONSEGUIR, ADQUIRIR MAGAZINE TIGHT LIGHT BULB WIDE READING SUBTITLE BOOKSTORE SNACK LUST DEPARTMENT STORE MANEJAR MAIOR MISTURE MOROSO NOTÍCIA NOVELA OFICIAL ORDINÁRIO OURO PARENTES PARTICULAR PASTA FÍSICO POLÍCIA PORTA PORTEIRO PREJUÍZO PRESCREVER PRESENTEMENTE PRETENDER PREVENIR PROCURAR HANDLE BIGGER MIXTURE SLOW NEWS SOAP OPERA OFFICIAL VULGAR GOLD RELATIVES PRIVATE FOLDER, PASTE PHYSICAL POLICE DOOR DOORMAN DAMAGE EXPIRE NOW INTEND WARN LOOK FOR
- 7. ETEC José Rocha Mendes PROFESSOR PROPAGANDA PROFESSOR DE UNIVERSIDADE PROFESSOR PROPAGANDA PROPER PULL PUSH DIVULGAÇÃODE IDÉIAS APROPRIADO, ADEQUADO PUXAR EMPURRAR RANGE REALIZE RECLAIM VARIAR, COBRIR PERCEBER RECUPERAR RANGER REALIZAR RECLAMAR RECORD REPORT GRAVAR, DISCO RELATÓRIO RECORDAR REPÓRTER REQUIREMENT RESPITE RESUME RÉSUMÉ RETIRE SCHOLAR SENSIBLE SORT STABLE STRANGER STUPID REQUISITO INTERVALO, PAUSA RECOMEÇAR CURRÍCULO APOSENTAR ERUDITO, LETRADO SENSATO ESPÉCIE, ESCOLHER FIRME, ESTÁVEL DESCONHECIDO BURRO REQUERIMENTO RESPEITO RESUMIR RESUMO RETIRAR ESCOLAR SENSIVEL SORTE ESTÁBULO ESTRANGEIRO ESTÚPIDO SUPPORT SUSTENTAR, APOIAR SUPORTAR SYMPATHETIC TAX TEMPER TENANT TENTATIVE TURN TUTOR UNIQUE USE VEGETABLES VINE COMPREENSIVO, SOLIDÁRIO IMPOSTO TEMPERAMENTO, GÊNIO INQUILINO PROVISÓRIO VEZ, VOLTA PROFESSOR PARTICULAR DIFERENTE, SEM IGUAL UTILIZAR, USAR VERDURAS, LEGUMES VINHA, VIDEIRA VIAGEM DE BARCO, NAVE ESPACIAL SIMPÁTICO TAXA TEMPERO TENENTE TENTATIVA TURNO TUTOR ÚNICO USAR (VESTIR) VEGETAIS VINHO VOYAGE PRÓPRIO PULAR PUXAR VIAGEM TEACHER ADVERTISEMENT OWN JUMP PULL CREAK, GUARDA FLORESTAL ACCOMPLISH COMPLAIN REMEMBER, RECALL REPORTER REQUEST, PETITION RESPECT SUMMARIZE SUMMARY WITHDRAW SCHOOLBOY SENSITIVE LUCK BARN FOREIGNER RUDE BEAR, STAND, TOLERATE NICE, PLEASANT, FRIENDLY FEE CONDIMENT LIEUTENANT ATTEMPT, TRY SHIFT GUARDIAN THE ONLY ONE WEAR PLANTS WINE JOURNEY, TRIP, TRAVEL
- 8. ETEC José Rocha Mendes Exercises 1. Encontre os falsos cognatos no texto abaixo, destacando-os: A DAY AT WORK In the morning I attended a meeting between management and union representatives. The discussion was very comprehensive, covering topics like working hours, days off, retirement age, etc. Both sides were interested in an agreement and ready to compromise. The secretary recorded everything in the notes. Eventually, they decided to set a new meeting to sign the final draft of the agreement. Back at the office, a colleague of mine asked me if I had realized that the proposed agreement would be partially against the company policy not to accept workers that have already retired. I pretended to be really busy and late for an appointment, and left for the cafeteria. Actually, I didn’t want to discuss the matter at that particular moment because there were some strangers in the office. After lunch I attended a lecture given by the mayor, who is an expert in tax legislation and has a graduate degree in political science. He said his government intends to assist welfare programs and senior citizens, raise funds to improve college education and build a public library, and establish tougher limits on vehicle emissions because he assumes this is what the people expect from the government. ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ 2. Leia o seguinte diálogo e responda: One Brazilian and one American are meeting in a coffe shop. AMERICAN – Hello, my friend! BRAZILIAN – Good afternoon. AMERICAN – How are you, man? BRAZILIAN – I’m disgust with my girlfriend. AMERICAN – So what? Can you repeat? I don’t understand. Por que o americano não entendeu o que o brasileiro disse? ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________
- 9. ETEC José Rocha Mendes 2.1 Ambigüidade Lexical A ambigüidade lexical acontece quando uma palavra possui mais de um significado possível. Esses significados são todos contextuais, que variam de situação para situação. Não há como listar todas as ambigüidades lexicais, devendo o leitor estar muito atento a esse detalhe quando efetuar a leitura do texto escrito. Abaixo alguns exemplos dessa ambigüidade: Inglês Abstract Affiliate Affluent Ambulant Apology Application Apply Argument Arm Bachelor Balance Ball Bar Bat Cancel Capital Case Cell Character China Class Classified Club Coll Collect Compass Confirmed Consistent Content Date Directory Easy Effective Entertain Faculty Figure Fix General Individual Interest Just Legend Letter Match Major Manifest Mark Mass Matter Medicine Move Observe Official Oil Operator Order Park Period Plant Principal Pupil Race Rare Record Rest Retire Roll Primeiro significado Abstrato Filiar-se Afluente Paciente de Ambulatório Apologia Aplicação Aplicar Argumento Arma Bacharel Balança Bola Bar Bastão de beisebol Cancelar Capital Caso Célula Caráter China Classe Classificado Clube Fresco Colecionar Compasso Confirmado Consistente Contente Date Diretoria Fácil Efetivo Entreter Faculdade (mental) Figura Fixar General Individual Interesse Justo Legenda Letra Ligar (Relacionar) Major Manifesto Marca Massa Matéria Medicina Mover Observar Oficial Óleo Operador Ordem Parque Período Planta Principal Pupila Raça Raro Recorde Resto Retirar Rolo Segundo significado Resumo Determinar Paternidade Rico Capaz de Caminhar Desculpas Requerimento Inscrever-se Discussão Braço Solteiro Equilíbrio Baile, Bala (projétil) Barra Morcego Carimbar Maiúscula Estojo Cela Personagem, caractere Porcelana Aula Confidencial Taco de golfe Legal Cobrar, coletar Bússola Inveterado Compatível Conteúdo Tâmara, Encontro Lista telefônica Em Paz / Confortável Verdadeiro Receber visitas Corpo Docente Número Consertar Geral Indivíduo Juros Apenas Lenda Carta Partida (Jogo) Principal Óbvio Nota Missa Assunto Remédio Mudar Celebrar Autoridade Petróleo Telefonista Pedido Estacionar Menstruação Fábrica Diretor da escola Aluno Corrida Mal passado (carne) Gravar Descansar Aposentar Lista
- 10. ETEC José Rocha Mendes Save Scale Sequel Spectacles Spirits Story Subject To Play Turkey Vice Salvar Escala Seqüela Espetáculos Espíritos Estória Sujeito Jogar/ Brincar Turquia Vice Economizar Balança Seqüência Óculos Bebida alcoólica Pavimento, andar Assunto Tocar / Imitar Peru Vício
- 11. ETEC José Rocha Mendes Exercises A) Assinale o significado correto das palavras em destaque nas sentenças: 1) I need to cancel your documents. ( ) cancelar ( ) carimbar 2) She is the principal of the school. ( ) diretora ( ) principal 3) His mark was terrible. ( ) marca ( ) nota 4) The operator (a) gave me the wrong number of the plant (b). a- ( ) operador ( ) telefonista b- ( ) planta ( ) fábrica 5) We are lost. We need a compass now. ( ) bússola ( ) compasso 6) He is the most famous bachelor of the party. ( ) bacharel ( ) solteirão 7) Do you know the capital (a) of China (b)? a- ( ) capital ( ) principal b- ( ) porcelana ( ) China 8) Brasilia is the capital of Brazil. ( ) capital ( ) maiúscula 9) I use capital letter to write my name. ( ) capital ( )maiúscula 10) I appreciate Chinese china. ( ) porcelana ( ) China 11) John collects caps. ( ) coleciona ( ) cobrou B) Dê os respectivos significados das palavras repetidas em cada segmento: 1) a) Mike is not married. He is a bachelor. b) He finished the college last year. Now, he is a bachelor in Biology. 2) We have a directory in order to look for the telephone numbers of the students. This directory is in the directory of the school. 3) The character of this film has a bad character. 4) You have to write the names of the capitals with capital letters.
- 12. ETEC José Rocha Mendes CAPÍTULO 3 3.0 Técnicas de Leitura Até agora passamos apenas pela parte vocabular do inglês instrumental. Essa capítulo trata de algumas técnicas para uma leitura eficiente. Elas devem ser usadas em conjunto para que, assim, permitam uma compreensão geral do texto e facilite muito a busca de informações no mesmo. 3.1 Instrumental Prediction Significa inferir o conteúdo de um texto através de seu conhecimento prévio sobre o tema (background); através do contexto semântico (palavras de um mesmo grupo, por exemplo: hospital, nurse, doctor, ambulance); contexto lingüístico (pistas gramaticais); contexto não-lingüístico (gravuras, gráficos, tabelas, números, etc.); conhecimento sobre estrutura do texto (layout, título, subtítulo, divisão de parágrafos, etc.). Em geral se faz uma previsão do texto, sem necessariamente ter lido o mesmo, como no exemplo abaixo: Sem ler, o que é possível ser dito acerca do texto? Primeiramente, olhando a estrutura, temos um título grande, seguido pelo nome de alguém, possivelmente o autor e a data. Então deve ser algum artigo de jornal. A imagem de um jogador nos remete a idéia de que deve ser da coluna de esportes, possivelmente de um jogo, pois há, antes do título, algo que aprece ser o resultado do mesmo.
- 13. ETEC José Rocha Mendes Então conseguem perceber como só observando o texto é possível extrair dele algumas informações que podem vir a ser úteis na sua leitura? Se você conhecer a respeito de baseball, vai saber que se tratam de dois times norteamericanos, uma vez que nos Eua o esporte é muito famoso. Vai reconhecer o esporte olhando meramente para a ilustração. Em outros casos, uma pesquisa básica revelaria essas informações ou mesmo uma leitura rápida em algumas linhas. 3.2 Typographical Evidences Um segundo passo importante é analisar a tipografia do texto, seus pontos e como as palavras estão dispostas. Também envolve palavras em negrito, itálico, sublinhadas e símbolos utilizados. É parecido com a técnica anterior, contudo, requer uma análise mais voltada a forma escrita. CHIP – protection by information CHIP refers to the Chemicals (Hazard Information and Packaging for Supply) Regulations 2002. These are sometimes also known as CHIP3. Pelo exemplo acima, usando a evidência tipográfica, conseguimos ver que o nome maior se trata do título do texto, por estar com fonte diferenciada, maior e em negrito. Abaixo vem a explicação, uma vez que repete parte do que foi colocado no título acima e os parêntesis ajudam a explicar alguma coisa relativa ao período. CHIP aparece em maiúscula, então possivelmente é importante para a compreensão do texto que seguirá.
- 14. ETEC José Rocha Mendes Exercises 1. Sem o uso do dicionário e sem ler o texto, diga do que se trata o trecho abaixo: __________________________________________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________
- 15. ETEC José Rocha Mendes 2. Olhando apenas para a escrita do texto, tente extrair dele algumas informações: ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________
- 16. ETEC José Rocha Mendes 3.3 Dictionary O uso de um dicionário ajuda muito na compreensão de um texto. Contudo, devemos evitar algumas coisas. Primeiro, não se faz tradução literal, por não ser o nosso objetivo. Segundo, deve ser utilizado caso se desconheça totalmente a palavra e não se consiga usar as técnicas apresentadas acima, devendo contextualizar a palavra. Exemplo: “A fallacy is a kind of error in reasoning. The alphabetical list below contains 176 names of the most common fallacies, and it provides explanations and examples of each of them. Fallacies should not be persuasive, but they often are. Fallacies may be created unintentionally, or they may be created intentionally in order to deceive other people. The vast majority of the commonly identified fallacies involve arguments, although some involve explanations, or definitions, or other products of reasoning.” Se fossemos, por exemplo, pesquisar a definição da palavra “be”, segundo o dicionário Michaelis, teríamos: be [bi:] v aux (ps was, pl were, pp been). 1 ser, existir, viver, ser realidade. it is mine, his / é meu, seu. it is my father’s / pertence a meu pai. she is everything to me / ela é tudo para mim. 2 ter lugar, acontecer, realizar-se. when is it to be? / quando será? 3 permanecer, ficar, continuar. 4 igualar, representar, significar. 5 estar, encontrar-se. to be at work / estar no trabalho. to be busy / estar ocupado. to be careful / ser cuidadoso. to be in a hurry / estar com pressa. he is at the advanced group / ele é do grupo dos adiantados. � visitar. • interj 6 be! seja! Excluindo algumas expressões, como saber o sentido correto dessa palavra? Lendo atentamente, com um pouco de calma, chega-se ao verbo “ser” e completa-se o sentido. Isso ressalta a importância do contexto em toda e qualquer leitura de inglês instrumental, pois é através dela, na maioria das vezes, que se chega ao significado de palavras que desconhecemos e que nos deixaria em dúvidas quando formos atrás dela no dicionário. 3.3.1 Como usar um dicionário A primeira regra fundamental sobre o uso do dicionário na leitura é que ele deve ser usado esporadicamente. Na leitura tradicional, com texto impresso em papel, a consulta feita ao dicionário é extremamente obstrutiva. O leitor precisa interromper totalmente a leitura, mover-se para um outro texto e iniciar um outro tipo de leitura, geralmente precedida de uma busca em várias páginas, até achar a palavra que procura, num verbete com maior ou menor grau de complexidade. Lido o verbete, faz a viagem de volta ao texto original, onde vai ter que se localizar novamente, provavelmente relendo partes do texto até o ponto onde ocorreu a interrupção. A consulta ao dicionário, portanto, só é aceita como último recurso, quando todas as demais estratégias de construção do sentido falharem. Existe também a questão do tipo de dicionário. Deixando de lado os dicionários especializados, como aqueles voltados para áreas específicas de conhecimento (dicionários estatísticos, filosóficos, etimológicos, ortográficos, regionais, de termos porto-alegrenses, etc.), temos basicamente quatro tipos: (1) dicionário monolíngüe, voltado para as necessidades dos falantes nativos, com ênfase nas palavras menos freqüentes ou acepções mais raras; (2) dicionário bilíngüe, com uma preocupação maior nas palavras mais freqüentes e expressões idiomáticas pelos problemas de polissemia que podem apresentar; (3) dicionário de aprendizagem, com inúmeros exemplos de uso da língua, e que servem tanto para atividades de leitura como de produção textual; e finalmente (4) os dicionários mistos, que reúnem as características do bilíngüe e do dicionário de aprendizagem. Um exemplo deste
- 17. ETEC José Rocha Mendes último tipo é o Longman English Dictionary for Portuguese Speakers (Konder, 1983). Há dicionários que podem oferecer uma ajuda maior ou menor ao leitor de um texto em língua estrangeira. Um dicionário monolíngüe, feito para leitores nativos, provavelmente será menos útil do que um dicionário de aprendizagem, com inúmeros exemplos de uso. No caso específico da leitura em língua estrangeira, um dicionário bilíngüe de bolso, provavelmente será mais útil do que um dicionário monolíngüe de aprendizagem. Você pode notar que podemos encontrar: - A representação fonética das palavras - Abreviaturas - Significado das palavras - Classe gramatical das palavras Veja o exemplo seguinte e responda: 1. Qual é a representação fonética da palavra “look”? 2. Quantos significados ela pode ter como substantivo? E como verbo? 3. Qual é a primeira expressão mencionada? 4. Qual é o significado de “to look for? Verbos Quando você procura um verbo no dicionário geralmente encontra a base do verbo, por exemplo: look, work, teach. Mas, quando lemos textos encontramos os verbos sob diferentes formas: looking, worked, teaches. Quando o verbo é irregular encontramos a seguinte explicação no dicionário: Fell/fel/ v. passado de fall. Assim, terá que procurar o verbo na sua forma base (fall), para encontrar a definição da palavra. Observe os seguintes exemplos em Português e Inglês. Quais as semelhanças na forma de utilização das palavras no Português e no Inglês? 1. Ele apagou as velas. 2. Tenho que limpar as velas do carro. 3. O marinheiro levantou as velas do barco. 4. Eu não vou ao cinema com eles porque detesto segurar vela. É claro que o contexto é sempre importante para a compreensão das palavras que têm vários significados diferentes. Em Inglês também o contexto é muito importante para a interpretação adequada dos vocábulos. 1. The waiter fills their glasses with champagne. 2. She went to the optician for a new pair of glasses. 3. This window is made of glass. 4. I like computers. 5. OS2 operating system is like Ms DOS Você precisa ter em mente que na leitura de textos técnicos você encontrará várias palavras em inglês que talvez já façam parte de seu vocabulário, mas que nesse contexto irão adquirir novos significados. Abreviaturas mais comuns encontradas nos dicionários
- 18. ETEC José Rocha Mendes f. feminino m. masculino m. pl = masculino plural p.p. = particípio passado pl = plural pop. = popular pref. = prefixo prep. = preposição pret. = pretérito pron. = pronome s. substantivo s.pl = plural sg. = singular sup. = superlativo v. = verbo var. = variante de Símbolos Comuns: ║ separação da categoria morfológica ~ substitui a palavra de entrada (ou seja, a palavra que se está consultando) Símbolos fonéticos: Formas de pronúncia Vogais / Ditongos / Semivogais / Consoantes Sinal ‘ que significa acentuação Sinal : que significa prolongação 3.4 Repeated Words Uma última técnica, muito importante, é o uso das palavras repetidas. Analisando qualquer texto em língua inglesa, é possível notar que algumas palavras se repetem e é importante notar isso. É preciso também verificar se a palavra tem o mesmo significado dentro do texto, mesmo que ela se repita diversas vezes. Mas é uma pista de que ela, possivelmente, se trata de algum termo importante para o texto. Em inglês costumam repetir muito os pronomes pessoais, por conta da estruturas subject+verb+complements (sujeito+verbo+complementos), sendo que toda oração deve ter um sujeito declarado.
- 19. ETEC José Rocha Mendes Exercises 1 . Leia o texto a seguir: Gas Cylinder Safety Mishandled cylinders may rupture violently, release their hazardous contents or become dangerous projectiles. If a neck of a pressurized cylinder should be accidentally broken off, the energy released would be sufficient to propel the cylinder to over three-quarters of a mile in height. A standard 250 cubic foot cylinder pressurized to 2,500 PSIG can become a rocket attaining a speed of over 30 miles per hour in a fraction of a second after venting from the broken cylinder connection. Basic Safety: If a cylinder is damaged, in poor condition, leaking, or the contents are unknown, contact your cylinder vendor. Have the vendor return the damaged cylinder to the manufacturer. • Wear appropriate foot protection when engaged in moving or transporting cylinders. • Sturdy shoes are a minimum. • Steel toed shoes if required by your supervisor, instructor, or department. • Proper personal protective clothing and equipment shall be worn. • Always have an appropriate Material Safety Data Sheet (MSDS) available and be familiar with the health, flammability and reactivity hazards for the particular gas. Cylinder Markings: • Cylinders must be properly labeled, including the gas identity and appropriate hazards (e.g., health, flammability, reactivity). Cylinders have several stamped markings. The top mark is either a DOT or an ICC marking indicating pertinent regulations for that cylinder. The second mark is the serial number. Under the serial number is the symbol of the manufacturer, user, or purchaser. Of the remaining marks the numbers represent the date of manufacture, and retest date (month and year). A (+) sign indicates the cylinder may be 10% overcharged, and a star indicates a ten year test interval. Font: http://www.aboutsafety.com/article.cfm?id=1312 (Adaptado) • A: Do que fala esse texto? __________________________________________________________________________________________ ___________________________________________________________________________ B: Qual o significado da palavra sign no texto? _______________________________________________________ 2. Leia o texto abaixo. Em seguida, escreva o que você compreendeu do mesmo, sem se importar com nenhuma tradução ou se não ficou parecido com o texto original.
- 20. ETEC José Rocha Mendes PROMASK Full Face Mask Promask, the new multi-function, full face mask provides unrivalled comfort and protection against a wide variety of respiratory hazards in major industrial applications. Promask has many unique features as well as offering proven convenience and reliable performance. Its slimline modern design have strong wearer appeal. Promask serves as a face piece • utilitising the full range of Pro2000 filters, • of a power-assisted respirator, • of a compressed-air-line respirator Promask Combi or • of a welding protector which can be used with filters, power-assisted or compressed-air-line supplies. Approved to EN136 Class 3, the highest standard for safety! Source: P.S.P Marketing Sdn Bhd (http://www.psp.com.my/) ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________
- 21. ETEC José Rocha Mendes CAPÍTULO 4 4.0 Estratégias de Leitura Além das técnicas apresentadas no capítulo anterior, existem duas estratégias principais que você precisa conhecer: o skimming e o scanning. 4.1 Skimming Consiste numa estratégia na qual se faz uma leitura superficializada do texto. Analisa-se tão somente um sentido geral, sem se ater a uma informação específica. São levantados apenas os aspectos gerais do texto e de sua leitura, para que com isso se tenha uma base para uma leitura mais aprofundada. Leia então o texto que segue: July’s Poem of the Month If Death is Kind By Sara Teasdale (1884 - 1933) Perhaps if Death is kind, and there can be returning, We will come back to earth some fragrant night, And take these lanes to find the sea, and bending Breathe the same honeysuckle, low and white. We will come down at night to these resounding beaches And the long gentle thunder of the sea, Here for a single hour in the wide starlight We shall be happy, for the dead are free. Primeiro, dando uma olhada, pode-se dizer que se trata de um poema, por conta da palavra poem, que abre o texto. Há alguma coisa que parecem versos, com orações incompletas em cada linha. Existem virgulas ao final de cada verso, o que indica que não segue uma ordem sintática padrão. Analisando os verdadeiros cognatos, tem a palavra returning, que é parecida com retornar, retorno, dando a idéia de alguma coisa que está voltando. Tem a palavra fragrant, que é parecida com fragrante, indicando alguma coisa que possui cheiro, possivelmente bom. Tem a palavra gentle, que é parecida com gentil e a palavra hour, que é parecida com hora. Dando uma lida rápida, a palavra death se repete duas vezes no texto, mostrando que é importante, de alguma forma, inclusive aparecendo no título. Indo ao dicionário, encontra-se como definição a palavra morte, então certamente esse poema fala de morte. Fala de tempo também, uma vez que tem uma imagem de um relógio. Podemos então dizer com isso que esse é um poema que fala sobre a morte e sobre o tempo E isso tudo sem ao menos ter lido esse poema a fundo, pegando apenas algumas palavras e fazendo uma previsão do seu conteúdo. É nisso que o skimming vai se pautar. Muitas vezes temos diversos textos a nossa disposição e saber exatamente do que eles tratam vai nos auxiliar para que saibamos exatamente onde procurar uma determinada informação.
- 22. ETEC José Rocha Mendes Como é possível perceber, essa é a forma onde se usa muitas das técnicas aprendidas anteriormente. Não existe uma preocupação em saber exatamente os detalhes, apenas as generalidades do texto. 4.1.1 Como fazer uso do skimming? A técnica requer que você use pequenos fragmentos do texto apresentado para uma leitura superficial, sem se prender a detalhes. Então comece lendo sempre os títulos, cabeçalhos, índices, sumários e ilustrações. Procure ler também o primeiro parágrafo de cada ponto do texto, depois do título, além de prestar atenção em números, datas, gráficos, esquemas e palavras que de alguma forma estejam em destaque. Se o texto contiver alguma introdução, procure lê-la, pois ela costuma resumir todo o assunto relativo ao texto ao qual ela apresenta.
- 23. ETEC José Rocha Mendes Exercises Leia os textos abaixo para responder às próximas questões: Carbon Monoxide Poisoning: The Silent Killer Carbon monoxide (CO) poisoning occurs when carbon monoxide gas is inhaled. CO is a colorless, odorless, highly poisonous gas that is produced by incomplete combustion. It is found in automobile exhaust fumes, faulty stoves and heating systems, fires, and cigarette smoke. Other sources include woodburning stoves, kerosene heaters, improperly ventilated water headers and gas stoves, and blocked or poorly maintained chimney flues. CO interferes with the ability of the blood to carry oxygen. The result is headache, nausea, convulsions, and finally death by asphyxiation. What you should know about carbon monoxide poisoning • Unlike many gases, it is odourless, colourless, tasteless and non-irritating. Red blood cells absorb the gas over 200 times more readily than oxygen. As levels of carbon monoxide in the air rise, this gas replaces oxygen in the bloodstream. As a result, body tissues are damaged and may die of a lack of oxygen. • The most common symptoms of carbon monoxide poisoning are respiratory difficulties and impairing of visual perception. • Have a reliable mechanic check the exhaust system of your car once a year to check for leaks and damaged pipes. Have the system checked if the sound of the exhaust is suddenly different or if you hear any funny noises. • When driving in heavy traffic it is also advisable to have a slight opening in the windows, especially with the airconditioning on. Do this when you are caught in heavy traffic or when the car is stationary for long hours. • If you park your car in a closed garage, carbon monoxide can rapidly build up while your engine is running with the garage doors closed. Never run your car in a garage unless the outside door is open to provide ventilation. • Have your vehicle regularly tuned to ensure that there is proper combustion in the engine. This will reduce the level of carbon monoxide emissions. If the car has a catalytic converter, make sure it is in proper working condition. Removing the catalytic converter can also increase carbon monoxide levels. What to do in case of carbon monoxide poisoning • Get the victim into the open air as quickly as possible • Check for respiration and pulse. If both are absent, begin CPR. • If breathing is absent but there is a pulse, begin mouth-to-mouth resuscitation and continue until the victim begins breathing or help arrives • Begin administering oxygen with an oxygen breathing mask as soon as one is made available • Get the victim to the hospital as soon as possible. Extended observation and additional emergency care will be required. There may also be other medical problems especially neurological, cardiac or pulmonary complications. How carbon monoxide seep into a vehicle Because it is a gas, carbon monoxide can basically get into a vehicle from any opening it is presented with. It can go in through:
- 24. ETEC José Rocha Mendes • • Air-conditioning vents via the handbrake and gear lever consoles • Holes, openings and rust spots under the vehicle or in the floorpan • • Holes and openings in the vehicle firewall Openings on the door handles and door seals Openings of the boot lid Ourselves were wed one summer—dear By Emily Dickinson (1830 - 1886) Ourselves were wed one summer - dear Your Vision - was in June And when Your little Lifetime failed, I wearied - too - of mine And overtaken in the Dark Where You had put me down By Someone carrying a Light I - too - received the Sign. ‘Tis true—Our Futures different lay Your Cottage - faced the sun While Oceans—and the North must be On every side of mine ‘Tis true, Your Garden led the Bloom, For mine - in Frosts - was sown And yet, one Summer, we were Queens But You - were crowned in June. A. Fazendo uma leitura superficializada, o que é possível falar acerca desses dois textos? ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ B. Descreva algumas informações relevantes acerca de cada um dos textos apresentados, baseando-se numa primeira leitura. ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________
- 25. ETEC José Rocha Mendes C. Supondo que você esteja trabalhando numa indústria que exponha seus funcionários ao gás carbônico, qual dos textos você utilizaria como base para informá-los acerca dos perigos do mesmo? Justifique sua resposta. ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________
- 26. ETEC José Rocha Mendes 4.2 Scanning É a técnica empregada quando se procura uma informação mais específica e menos geral acerca de um texto. Do contrário do skimming, aqui se visa a busca de alguma informação de maneira rápida, dando uma lida em algumas poucas palavras para a encontrar. Para tanto, existem alguns passos que devem ser seguidos para se fazer um scanning de forma eficiente. 4.2.1 Keywords (palavras-chave) São algumas palavras que, pelo seu grau de importância, ajudam a dar uma idéia daquilo que se fala em determinado trecho. Destacando algumas palavras do próprio texto é possível pegar seu sentido geral e, assim, fazer uma leitura mais proveitosa. 4.2.2 Mapa Mental Após encontrar algumas palavras que resumam o texto, é preciso também criar um mapa, contendo os assuntos mais relevantes do texto e colocar numa ordem de importância esses assuntos. Para isso se torna necessário separar o texto em pequenos blocos, de acordo com o assunto e a importância. Para cada assunto, pegar palavras-chave do próprio texto e, com elas, montar um pequeno sumário mental. Para determinar o assunto de um determinado bloco de texto, é necessário o uso de poucas palavras, para ser de fácil memorização. Quanto menos palavras e quando mais simples forem as mesmas, melhor. Também é útil descartar informações que não serão usadas e blocos com informação irrelevante. 4.2.3 Anotações Fala anotações ao longo do texto, sobretudo em expressões pouco conhecidas ou estranhas. Procure sempre o significado das siglas e abreviações usadas e, se possível, monte um pequeno glossário com as expressões mais comuns utilizadas no texto lido. Isso vai facilitar o trabalho de procura de informações.
- 27. ETEC José Rocha Mendes 4.3 Buscando informações específicas Após usar as técnicas apresentadas anteriormente, fica uma questão em aberto: e quando eu quiser alguma informação específica, como devo proceder? Ou ainda, quando eu precisar de uma informação detalhada, como posso conseguir essa informação em pouco tempo? Primeiro, procure conhecer previamente o texto onde as informações serão retiradas. Faça uso do scanning e do skimming, fazendo algumas anotações e construindo um mapa mental. Depois disso, tente localizar o trecho de onde você precisará da informação e faça uma leitura aprofundada, consultando os verbetes que parecerem ser mais importantes e as siglas apresentadas. Procure relacionar quaisquer elementos gráficos presentes, como figuras, tabelas, caixas de texto e outras coisas, dessa forma elas te dão pistas de que aquilo faz parte da informação específica.
- 28. ETEC José Rocha Mendes Exercise Abaixo está a reprodução de um manual, com apenas uma página. Leia usando todas as técnicas apresentadas acima para responder às questões que seguem: 1 – Do que trata o texto 2 – Quais as principais informações apresentadas no texto? Health and Safety Executive Guidance on storing pesticides for farmers and other professional users HSE information sheet Agriculture Information Sheet No 16 Introduction ■ This information sheet provides guidance to professional users of pesticides on suitable standards for storage. By following it, professional users will help to ensure that they meet their duties under relevant legislation. It contains advice on: ■ ■ ■ ■ ■ fixed stores, including purpose-built stores, converted existing buildings or parts of existing buildings and small-scale storage in cabinets, chests etc; mobile stores providing short-term storage away from the home base in vehicles, on bowsers and sprayers etc; storing small amounts of particular pesticides whose hazardous chemical properties require additional precautions to be taken. ■ ■ ■ It does not cover storing methyl bromide, storing pesticides by suppliers (which includes contractors who supply pesticides), nor transporting pesticides from suppliers to the end user. If you carry out any of these activities you should consult the DEFRA Code of Practice for suppliers of pesticides to agriculture, horticulture and forestry (the Yellow Code). Estimate the likely total of stocks to be held at any one time – include pesticides such as slug pellets, rodenticides and wood treatment products. Check if you need to make additional provision for storing any of the special classes of pesticides listed at the end of this sheet. Consider the need to store other potentially harmful chemicals and allow for likely amounts. Provide adequate storage for rinsed empty containers awaiting disposal. Check what other facilities you may need to provide (eg storage for contaminated equipment, personal protective equipment, washing facilities etc) by reading the code of practice relevant to your pesticide work (see ‘Further reading’). Remember that if the store is too small it leaves staff working in cramped conditions, often having to move one product to get to another. Location Before creating new storage check with: ■ ■ If you store flammable pesticides such as anti-fouling products, refer to HSE’s guidance booklet The storage of flammable liquids in containers. your local authority planning department – you may need planning permission for your store; the Environment Agency (EA) or in Scotland the Scottish Environmental Protection Agency (SEPA). You may be in an ‘environmentally sensitive area’ such as a groundwater protection zone or upstream of water supply catchment areas. For the purposes of this information sheet ‘professional user’ means anyone who uses pesticides as part of their business or undertaking, whether as an employer or self-employed person. Site your store away from areas that present a risk of fire and at least four metres away from: Fixed storage ■ ■ hay, straw, diesel, oils, paints, fertilisers, paper, wood stacks, gas containers and other combustible materials; domestic dwellings or sources of ignition such as grain driers or welding/grinding activities. What are your storage needs? Check where any contaminated fire-fighting water will drain and: Size ■ The store needs to be large enough to hold your peak pesticide requirements, any part-used containers, and able to cope with stock being held over due to poor weather. ■ 1 do not site stores near to drains, watercourses, wells and boreholes or areas liable to flooding.
- 29. ETEC José Rocha Mendes ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________
- 30. Great health and safety myths The myth If a pupil is hurt, the teacher is likely to be sued The reality The main legal duties lie with the employer, not the teacher – or even the head teacher, unless they own the school and employ the staff. We can’t find a single instance in the past five years of a teacher being personally sued for compensation. Over the years a handful of teachers have been prosecuted following very serious incidents, but only where they failed to follow direct instructions and departed from common sense. Teachers who act responsibly will be on the right side of the law. Go to www.hse.gov.uk/myth/index.htm to find out more No 11 February 2008
- 31. Health and Safety Executive Safe work in confined spaces Safe work in confined spaces This document is aimed at employers and the self-employed who carry out work in confined spaces, and forms part of HSE’s commitment to make simple and practical guidance available for small firms. It will help them take the necessary action to meet the requirements of the Confined Spaces Regulations 1997. It will also be a useful source of information to anyone involved in carrying out work in confined spaces. Confined spaces can be deadly This is a web-friendly version of leaflet INDG258 A number of people are killed or seriously injured in confined spaces each year in the UK. This happens in a wide range of industries, from those involving complex plant to simple storage vessels. Those killed include not only people working in the confined space but those who try to rescue them without proper training and equipment. What is a confined space? It can be any space of an enclosed nature where there is a risk of death or serious injury from hazardous substances or dangerous conditions (eg lack of oxygen). Some confined spaces are fairly easy to identify, eg enclosures with limited openings: s s s s s storage tanks; silos; reaction vessels; enclosed drains; sewers. Others may be less obvious, but can be equally dangerous, for example: s s s s s open-topped chambers; vats; combustion chambers in furnaces etc; ductwork; unventilated or poorly ventilated rooms. It is not possible to provide a comprehensive list of confined spaces. Some places may become confined spaces when work is carried out, or during their construction, fabrication or subsequent modification. 1 of 7 pages
- 32. Health and Safety Executive What are the dangers from confined spaces? Dangers can arise in confined spaces because of: s A lack of oxygen. This can occur: - where there is a reaction between some soils and the oxygen in the atmosphere; - following the action of groundwater on chalk and limestone which can produce carbon dioxide and displace normal air; - in ships’ holds, freight containers, lorries etc as a result of the cargo reacting with oxygen inside the space; - inside steel tanks and vessels when rust forms. s Poisonous gas, fume or vapour. These can: - build-up in sewers and manholes and in pits connected to the system; - enter tanks or vessels from connecting pipes; - leak into trenches and pits in contaminated land, such as old refuse tips and old gas works. Liquids and solids which can suddenly fill the space, or release gases into it, when disturbed. Free flowing solids such as grain can also partially solidify or ‘bridge’ in silos causing blockages which can collapse unexpectedly. Fire and explosions (eg from flammable vapours, excess oxygen etc). Residues left in tanks, vessels etc, or remaining on internal surfaces which can give off gas, fume or vapour. Dust may be present in high concentrations, eg in flour silos. Hot conditions leading to a dangerous increase in body temperature. s s s s s Some of the above conditions may already be present in the confined space. However, some may arise through the work being carried out, or because of ineffective isolation of plant nearby, eg leakage from a pipe connected to the confined space. The enclosure and working space may increase other dangers arising through the work being carried out, for example: s s s machinery being used may require special precautions, such as provision of dust extraction for a portable grinder, or special precautions against electric shock; gas, fume or vapour can arise from welding, or by use of volatile and often flammable solvents, adhesives etc; if access to the space is through a restricted entrance, such as a manhole, escape or rescue in an emergency will be more difficult (see Emergency procedures). What the law says You must carry out a suitable and sufficient assessment of the risks for all work activities for the purpose of deciding what measures are necessary for safety (The Management of Health and Safety at Work Regulations 1999, regulation 3). For work in confined spaces this means identifying the hazards present, assessing the risks and determining what precautions to take. In most cases the assessment will include consideration of: s s s s s the task; the working environment; working materials and tools; the suitability of those carrying out the task; arrangements for emergency rescue. Safe work in confined spaces 2 of 7 pages
- 33. Health and Safety Executive HSE’s free leaflet Five steps to risk assessment will help you further. You may need to appoint competent people to help manage the risks and ensure that employees are adequately trained and instructed (The Management of Health and Safety at Work Regulations 1999, regulation 7). Of course, you may be the best person to do this, however, you may need to train someone else or engage the services of a competent person for additional help. If your assessment identifies risks of serious injury from work in confined spaces, such as the dangers highlighted above, the Confined Spaces Regulations 1997 apply. These regulations contain the following key duties: s s s avoid entry to confined spaces, eg by doing the work from outside; if entry to a confined space is unavoidable, follow a safe system of work; and put in place adequate emergency arrangements before the work starts. These duties, and what you need to do, are further described in this document. Avoid entering confined spaces You need to check if the work can be done another way so that entry or work in confined spaces is avoided. Better work-planning or a different approach can reduce the need for confined space working. Ask yourself if the intended work is really necessary, or could you: s s s s s modify the confined space itself so that entry is not necessary; have the work done from outside, for example: blockages can be cleared in silos by use of remotely operated rotating flail devices, vibrators or air purgers; inspection, sampling and cleaning operations can often be done from outside the space using appropriate equipment and tools; remote cameras can be used for internal inspection of vessels. Safe systems of work If you cannot avoid entry into a confined space make sure you have a safe system for working inside the space. Use the results of your risk assessment to help identify the necessary precautions to reduce the risk of injury. These will depend on the nature of the confined space, the associated risk and the work involved. Make sure that the safe system of work, including the precautions identified, is developed and put into practice. Everyone involved will need to be properly trained and instructed to make sure they know what to do and how to do it safely. The following checklist is not intended to be exhaustive but includes many of the essential elements to help prepare a safe system of work. Appointment of a supervisor Supervisors should be given responsibility to ensure that the necessary precautions are taken, to check safety at each stage and may need to remain present while work is underway. Safe work in confined spaces 3 of 7 pages
- 34. Health and Safety Executive Are persons suitable for the work? Do they have sufficient experience of the type of work to be carried out, and what training have they received? Where risk assessment highlights exceptional constraints as a result of the physical layout, are individuals of suitable build? The competent person may need to consider other factors, eg concerning claustrophobia or fitness to wear breathing apparatus, and medical advice on an individual’s suitability may be needed. Isolation Mechanical and electrical isolation of equipment is essential if it could otherwise operate, or be operated, inadvertently. If gas, fume or vapour could enter the confined space, physical isolation of pipework etc needs to be made. In all cases a check should be made to ensure isolation is effective. Cleaning before entry This may be necessary to ensure fumes do not develop from residues etc while the work is being done. Check the size of the entrance Is it big enough to allow workers wearing all the necessary equipment to climb in and out easily, and provide ready access and egress in an emergency? For example, the size of the opening may mean choosing air-line breathing apparatus in place of self-contained equipment which is more bulky and therefore likely to restrict ready passage. Provision of ventilation You may be able to increase the number of openings and therefore improve ventilation. Mechanical ventilation may be necessary to ensure an adequate supply of fresh air. This is essential where portable gas cylinders and diesel-fuelled equipment are used inside the space because of the dangers from build-up of engine exhaust. Warning: carbon monoxide in the exhaust from petrol-fuelled engines is so dangerous that use of such equipment in confined spaces should never be allowed. Testing the air This may be necessary to check that it is free from both toxic and flammable vapours and that it is fit to breathe. Testing should be carried out by a competent person using a suitable gas detector which is correctly calibrated. Where the risk assessment indicates that conditions may change, or as a further precaution, continuous monitoring of the air may be necessary. Provision of special tools and lighting Non-sparking tools and specially protected lighting are essential where flammable or potentially explosive atmospheres are likely. In certain confined spaces (eg inside metal tanks) suitable precautions to prevent electric shock include use of extra low voltage equipment (typically less than 25 V) and, where necessary, residual current devices. Safe work in confined spaces 4 of 7 pages
- 35. Health and Safety Executive Provision of breathing apparatus This is essential if the air inside the space cannot be made fit to breathe because of gas, fume or vapour present, or lack of oxygen. Never try to ‘sweeten’ the air in a confined space with oxygen as this can greatly increase the risk of a fire or explosion. Preparation of emergency arrangements This will need to cover the necessary equipment, training and practice drills. Provision of rescue harnesses Lifelines attached to harnesses should run back to a point outside the confined space. Communications An adequate communications system is needed to enable communication between people inside and outside the confined space and to summon help in an emergency. Check how the alarm is raised Is it necessary to station someone outside to keep watch and to communicate with anyone inside, raise the alarm quickly in an emergency, and take charge of the rescue procedures? Is a ‘permit-to-work’ necessary? A permit-to-work ensures a formal check is undertaken to ensure all the elements of a safe system of work are in place before people are allowed to enter or work in the confined space. It is also a means of communication between site management, supervisors, and those carrying out the hazardous work. Essential features of a permit-to-work are: s s s s clear identification of who may authorise particular jobs (and any limits to their authority) and who is responsible for specifying the necessary precautions (eg isolation, air testing, emergency arrangements etc); provision for ensuring that contractors engaged to carry out work are included; training and instruction in the issue of permits; monitoring and auditing to ensure that the system works as intended. Emergency procedures When things go wrong, people may be exposed to serious and immediate danger. Effective arrangements for raising the alarm and carrying out rescue operations in an emergency are essential. Contingency plans will depend on the nature of the confined space, the risks identified and consequently the likely nature of an emergency rescue. Safe work in confined spaces 5 of 7 pages
- 36. Health and Safety Executive Emergency arrangements will depend on the risks. You should consider: Communications How can an emergency be communicated from inside the confined space to people outside so that rescue procedures can start? Don’t forget night and shift work, weekends and times when the premises are closed, eg holidays. Also, consider what might happen and how the alarm can be raised. Rescue and resuscitation equipment Provision of suitable rescue and resuscitation equipment will depend on the likely emergencies identified. Where such equipment is provided for use by rescuers, training in correct operation is essential. Capabilities of rescuers They need to be properly trained people, sufficiently fit to carry out their task, ready at hand, and capable of using any equipment provided for rescue, eg breathing apparatus, lifelines and fire-fighting equipment. Rescuers also need to be protected against the cause of the emergency. Shut down It may be necessary to shut down adjacent plant before attempting emergency rescue. First-aid procedures Trained first aiders need to be available to make proper use of any necessary firstaid equipment provided. Local emergency services How are the local emergency services (eg, fire brigade) made aware of an incident? What information about the particular dangers in the confined space is given to them on their arrival? Relevant law s s s s s s s The Confined Spaces Regulations 1997; The Management of Health and Safety at Work Regulations 1999; The Control of Substances Hazardous to Health Regulations 2002 (as amended); The Personal Protective Equipment at Work Regulations 1992 (as amended); The Provision and Use of Work Equipment Regulations 1998; Electricity at Work Regulations 1989; Workplace (Health, Safety and Welfare) Regulations 1992. Some of the above law is relevant because of the nature of the work to be carried out inside a confined space, eg where there are risks from machinery, electricity or from hazardous substances. Safe work in confined spaces 6 of 7 pages
- 37. Health and Safety Executive Further guidance Safe work in confined spaces. Confined Spaces Regulations 1997. Approved Code of Practice, Regulations and guidance L101 HSE Books 1997 ISBN 0 7176 1405 0 Guidance on permit-to-work systems: A guide for the petroleum, chemical and allied industries HSG250 HSE Books 2005 ISBN 0 7176 2943 0. The relevance of this guidance is not restricted to the petroleum industry. It will be helpful in any industry or work activity where the preparation and application of permits-to-work are being considered. 5 steps to risk assessment Leaflet INDG163(rev2) HSE Books 2006 (single copy free or priced packs of 10 ISBN 0 7176 6189 X) HSE priced and free publications are available by mail order from HSE Books, PO Box 1999, Sudbury, Suffolk CO10 2WA Tel: 01787 881165 Fax: 01787 313995 Website: www.hsebooks.co.uk (HSE priced publications are also available from bookshops and free leaflets can be downloaded from HSE’s website: www.hse.gov.uk.) For information about health and safety ring HSE’s Infoline Tel: 0845 345 0055 Fax: 0845 408 9566 Textphone: 0845 408 9577 e-mail: hse.infoline@natbrit.com or write to HSE Information Services, Caerphilly Business Park, Caerphilly CF83 3GG. This document is available in priced packs of 20 from HSE Books, ISBN 0 7176 1442 5. Single free copies are also available from HSE Books. This document contains notes on good practice which are not compulsory but which you may find helpful in considering what you need to do. © Crown copyright This publication may be freely reproduced, except for advertising, endorsement or commercial purposes. First published 10/97. Please acknowledge the source as HSE. Published by the Health and Safety Executive INDG258 Reprinted 09/06 7 of 7 pages
- 38. HSE information sheet Urban rodent control and the safe use of rodenticides by professional users HSE Information Sheet MISC515 of strategies you intend to adopt. If your previous advice has not been followed, then this will need to be revisited, underlining the importance of environmental management in the successful control of rodent populations. It is also important to explain to the client that you will need regular access to the site during the treatment phase and at the end to remove bait that has not been eaten. Convenient times for revisits should be agreed. Introduction This information sheet is aimed at people working in rodent control in urban areas. It gives guidance on the precautions you need to consider when carrying out treatments to control the two main urban pest species, brown rats (Rattus norvegicus) and house mice (Mus domesticus). It assumes that you are competent and have been adequately trained. Site survey Rodents pose a threat to people’s health and may cause significant damage to commodities and the fabric of buildings. The primary aim is to avoid infestation, as once established, rats and mice can be difficult to control. You should carry out a site survey to establish the type, level and extent of the infestation. The survey will help you to identify important factors (eg the degree of public access to the site; the presence of children and non-target animals, such as pets and wildlife) that will influence your choice of control strategies for that site. Evidence of poor housekeeping and hygiene, alternative sources of food and obvious building/drain defects should be noted on the site plan. It may be useful to obtain photographic evidence of poor environmental management practices. You may have to deal with infestations inside and outside buildings and there may be populations of rats in the sewer system. It is important to review approaches to control holistically and integrate a range of control measures into your treatment strategy. Relying on rodenticides alone does not guarantee that the infestation will always be eradicated and numbers may quickly recover after treatment. It is important that following measures to reduce rodent numbers you consider ways of improving environmental management at the site. This should provide effective, long-term control of rodent infestations. You should concentrate particularly on improving hygiene and proofing, maintenance and repair of buildings. During the survey, try to establish the rodents’ food sources. This will be particularly important if you intend to use concentrates to formulate your own baits, as part of the treatment strategy. Reducing the availability of alternative food at the start of a treatment, or shortly afterwards, can encourage rodents to feed on your bait. Where there are rats you should note obvious drainage defects, such as broken pipes, defective chamber covers, bad brickwork, half channels inside manholes, stoppers missing from the rodding eye or surface water gullies and bring them to the attention of your client. If your assessment confirms that rodenticides are necessary, it is important to use them safely. This information sheet contains advice on how to minimise the risks rodenticides may pose to human health, non-target animals and the environment. Where there is an obvious defect that may allow rat invasion from neighbouring properties, it is good practice to tell your client of the risk this may pose and where appropriate report it to the local authority, who may be able to initiate a repair. What to do before treatment Client details When you receive notification of an infestation, take some basic information including: ● ● ● Block treatments Effective control of rodents in the urban environment may be difficult in buildings with multiple uses and/or occupiers. There may be several agencies involved in controlling rodents. Where possible it is good practice to co-ordinate control measures to make sure all premises on that site are inspected and, where necessary, treated. This will reduce the chances of rodents surviving the treatment by avoiding the control measures and reinvading the areas you have treated. details of the person reporting it; where rodents have been seen (indoors/outdoors); and if indoors, a suitable time to gain access. In commercial premises, it is useful to establish who to report to on site and if there are parts of the site where pest control technicians may have restricted/no access. If you have treated this site before, it is good practice to review the previous strategies, advice and potential problems associated with the site before visiting. It is important to involve your client when discussing the range Risk assessments The information gathered during the survey should enable you to identify the hazards on the site and determine the 1
- 39. concentration. Doing so will mean the finished bait poses a greater risk and is likely to make it less palatable to the rodents. It is also illegal to add substances such as flavour enhancers to ready-to-use products to try to improve their palatability. risks posed to: ● ● ● human health (eg through accidentally eating bait, particularly by children); non-target animals (eg through eating bait and/or poisoned rodents by pets and/or wildlife); the environment (eg through contamination of watercourses). You must check the approval conditions granted for each product you intend to use. This risk assessment will determine the treatment strategy you adopt. After considering control measures such as proofing, improvements in hygiene, environmental management, and non-chemical approaches to control (eg traps) you may conclude you still need to use a rodenticide. Before carrying out any work you should carry out an assessment, as required by the Control of Substances Hazardous to Health Regulations 2002 (‘the COSHH assessment’). This will help to make sure the product you select and its method of application will effectively control rodents, while minimising risks to yourself and anyone else who comes into contact with the rodenticide. At this stage, you should decide where to lay bait points and, if appropriate, how to prevent access by children and non-target animals, eg by: ● ● ● ● ● ● Active ingredients Active ingredients are divided into three main groups, reflecting the way they work. Acute rodenticides act rapidly (within 24 hours), but may induce bait shyness if a sublethal dose is eaten. Sub-acute rodenticides may not cause death for several days, even though a lethal dose may be consumed during the first 24 hours and feeding may continue during this period. Chronic rodenticides are slow-acting and the anticoagulants belong to this group. They can cause death in a minimum of 2-3 days, but on average it takes 5-7 days. Anticoagulants can be sub-divided into first and secondgeneration anticoagulants, based on their potency, or into single-feed and multi-feed anticoagulants, depending on the number of feeds required. Your choice of active ingredient will be determined by the characteristics of the site, previous treatment history (if available) and the conditions of use on the product label. The choice of product will influence operational aspects of the treatment regime. locating baits in inaccessible positions; directly baiting outdoor rat holes; using materials available on site to protect bait points; placing baits in locked or otherwise secure premises; using self-made bait boxes which are fit for purpose; using proprietary tamper-resistant bait stations. Remember: COSHH and the Management of Health and Safety at Work Regulations 1999 require that assessments are carried out to identify any risks to operators and others who may be affected by the treatment. There is a requirement to record the findings of the assessment, unless they are so simple that they can be easily recalled and the conclusions explained at any time. However, small companies with fewer than five employees are not required to keep a written record, although it is good practice to do so. ● ● ● ● only use a product that has been approved under the Control of Pesticides Regulations 1986 (as amended 1997)/Biocidal Products Regulations 2001 (as amended 2003) for use as a rodenticide; comply with the statutory conditions of use, which are given on the product label; follow directions for use and any other information supplied with the product; make sure you carry out all the control measures identified in your own COSHH assessment. Bait formulation Failure to do this may result in action by the enforcement authorities. The bait formulation should be appropriate to the conditions and circumstances of the infestation. A wide range of ready-to-use products are approved under the Control of Pesticides Regulations 1986 (as amended 1997)/Biocidal Products Regulations 2001 (as amended 2003) for use as rodenticides, formulated on a variety of bait bases. Guidance for treatment Restricting access to foodstuffs is an essential precursor to treatment. Use a variety of control methods Rodenticide concentrates for preparing dry or liquid baits are also available. You should use a bait base that is suitable for the infestation, such as the primary food the rodents are eating. If you decide to use a concentrate, you must justify its use within your risk assessment. If you prepare and mix your own bait, you may need to take additional precautions, including the use of personal protective equipment as identified by your COSHH assessment. It is illegal to exceed the recommended The urban environment is a diverse and complex setting, with different types and ages of properties with different uses. It is important that you do not rely solely on the use of rodenticides to control urban rodents. Programmes that integrate a range of methods, including physical and/or biological control, will be more successful in the long term than those that rely solely on chemical means. 2
- 40. rodenticide in single pellets or grains will be substantially less than that in intact place packs/sachets or blocks, reducing the potential risk to non-targets if bait is dropped by rodents. While trapping is labour-intensive, it can prove useful in controlling small infestations and may provide an alternative means of control where the use of rodenticides is unacceptable. Break-back traps for use against mice and rats are available. If you intend to use live-traps, they should be inspected regularly, at least once a day, and any captured animals humanely dispatched. Although the use of rodent boards are still permitted, this method does raise concerns about humaneness. You should consider all other options before adopting this method of control and clearly justify its use for each treatment. When using rodent boards, the frequency of inspection and dispatch of captured animals follows that specified for other live-trap methods. Placing the bait Outside occupied buildings you may find rats in burrows; piles of rubbish; vegetation or other materials; sheds and garages or other buildings; compost heaps/bins and drains. In all these situations you must make sure bait is adequately protected from children and non-target animals. If you place the bait in rat burrows, cover the burrow entrances afterwards to reduce the risks of bait being ejected or spilt. Once adequate control has been achieved the following environmental management measures should be considered: ● ● ● If you place bait inside, directly on the floor, it may be difficult to remove at the end of the treatment. Use of plastic trays or other measures should help to avoid this. You also need to take account of the risks from bait being disturbed as a result of activities of rodents or other animals or changes to the site as a result of, eg building work. You should consider the size and the likely reactions of the rodent population (ie identify areas where rats may feel uncomfortable). improving hygiene by clearing away rubbish; reducing harbourage; proofing buildings. Areas that are prone to infestation and reinfestation should be monitored regularly to prevent chronic infestations becoming established. Where you suspect fly-tipping or accumulations of rubbish may be contributing to the persistence of an infestation, the local authority environmental health department may be able to help remove such accumulations. If you cannot find suitable cover to protect baits, you will have to use other measures unless (for indoor baiting) you can control or restrict access to the area where the bait is laid. You can make your own boxes for this, as long as they are fit for this purpose, or you can buy commercially available tamper-resistant bait stations. Where your COSHH assessment identifies it as necessary, you should ensure the bait station is secured in position (eg when the bait is of a type that could be shaken out), and that you have followed the instructions to prevent the container being opened. Rodent behaviour Rats are particularly shy animals and nervous of strange objects that appear in their territories. It may be better to protect and secure bait points using existing materials, rather than introduce bait containers. During the survey, note any general features (such as gaps underneath paving flags) that you could use to place bait safely. This may eliminate the need for bait boxes and be more effective in bringing the rodent into contact with the bait. It may also reduce the total length of time bait needs to be laid and therefore reduce the likelihood of non-target animals coming across it. Rodenticides may cause rodents to die in inaccessible areas, where it will be difficult to retrieve the dead bodies. This could cause problems with odours and in such locations it may be appropriate to consider alternative control methods, such as the use of traps, to help retrieve the dead bodies. House mice are generally more inquisitive, and so are less likely to avoid new objects in their environment. As a general rule, mouse control is more likely to be successful if small amounts of bait are placed at a large number of locations. Monitoring Once the treatment phase is underway, it is important to monitor it regularly to track its progress. During revisits you should: Hoarding of bait ● ● ● ● Remember that rats may carry bait away and hoard it, or drop it in areas where children or non-target animals can come into contact with it. If more bait is being consumed than expected for the size of the infestation, consider whether hoarding may be a problem. If you think it is, search for any caches of bait and dispose of it safely. You should secure any place packs/sachets or blocks at the placement site or reconsider the bait formulation being used. It will be more difficult for rats to hoard large quantities of loose grain bait and the quantity of ● search for and remove any carcasses; make sure there is enough bait available; check that the baiting points remain secure; deal with spillages or other problems as they occur; and observe progress of the treatment. Effective monitoring needs a reliable recording system and should enable you to identify potential problems with progress, such as a decline in efficacy of a particular rodenticide. This should prompt a review of your strategy. 3
- 41. approved for use against them. Behavioural resistance in mice has also been reported and if you suspect that you are dealing with such a population, you will need to consider alternative treatment regimes/control methods (eg placing bait directly on the floor rather than in bait boxes), alternative formulations (eg contact dusts or gels) or alternative bait bases (eg using the foodstuffs they are eating at the site). Records Record where you have placed the bait, which rodenticide you used and how much bait has been laid. For complex and/or large sites, ask the client to provide a site map, if there is one, for you to record the positions where bait has been placed. Tell the person you are dealing with and others with regular access to the site what you have done, where any rodenticide baits are, the products used and the risks associated with their use, what to do in an emergency and your contact details if they need further advice about the treatment. Leave a copy of your written record and a sketch plan of the bait points with them. If possible, obtain their signature to confirm that they have received and understood details of the work that has been carried out. If you have ruled out all other possible explanations for the persistence of rodent populations in urban areas and suspect that you may be dealing with a resistant population, you should inform RRAG (the Rodenticide Resistance Action Group: RRAG, 1 Gleneagles House, Vernongate, South Street, Derby DE1 1UP Website: www.bpca.org.uk/RRAG/about.htm). This information could identify potential hotspots of resistance in urban areas and will complement the information that already exists for agricultural locations. There may be instances where a treatment is carried out at a site where English is not the first language of your client. So, it may be difficult to ensure that the details of the treatment have been understood. Take reasonable steps to make sure that the hazards and risks associated with the treatment have been understood. Using non-anticoagulant rodenticides While anticoagulants provide an effective and efficient method of controlling rodents, if they are not available, if they cannot be used or if resistance to them has been confirmed, you may need to consider alternatives such as calciferol (approved for use against rats and mice) or alphachoralose (only approved for use against mice). Removal of dead rodents Search for and remove any dead rodents and dispose of them safely, in line with the product label. This is particularly important to reduce the risk of secondary poisoning, especially in areas where birds of prey or other predators are known to be active, and where large populations of outdoor rodents are being controlled. For further advice on the disposal of rodent bodies contact the EA/SEPA. Reinvasion In urban areas, the risks of reinvasion from neighbouring sites may be considerable, especially in areas where general environmental management is poor. It is good practice to liaise with other pest control contractors, regulatory agencies and the general public to coordinate control strategies and reduce the risk of reinvasion. Where members of the public wish to feed wild birds, they should be encouraged to use RSPB-approved bird feeders and be made aware that throwing bread and other food on the ground may, in addition to feeding the wild bird population, provide a food source for rats in the area. General advice on the storage of refuse and the use of rodent-proof bins should be provided where appropriate. Replenishing bait Once laid, baits should be inspected frequently and where bait has been eaten, it should be replenished as necessary. Determine how often you need to inspect baits from the label instructions and the characteristics of the infestation. It is important to record the amount of bait put down, so you can decide whether larger amounts are needed. Continue baiting until all feeding activity has stopped, as overcoming the neophobic response in rats may take some time. However, if there is little evidence of bait takes after two weeks, it is unlikely that the treatment will prove effective and you should remove the bait and consider an alternative strategy. Long-term baiting Long-term and perimeter baiting may help to control invading rodents, or give you early warning of an infestation, so treatment can be better targeted and timed, ie before an infestation becomes well established. However, consider these approaches carefully and be justified in your risk assessment for each location where they are used. The preferred approach is to use non-toxic blocks or whole grain as a guide to the presence of an infestation that may then trigger the use of a rodenticide. Check baits regularly to establish whether rodents are present. Resistance Resistance to anticoagulants has been confirmed in some rat populations in agricultural areas, although the position in urban environments is unknown. Treatment failures are more likely to be due to inappropriate bait, inadequate quantities of bait, poor bait placement, bait shyness or reinvasion from surrounding areas. But, if these factors have been ruled out and the bait is still being eaten without any obvious decline in the rate of consumption, it may be a sign of the presence of true anticoagulant resistance. Anticoagulant resistance in mouse populations is so widespread, that no first-generation anticoagulants are Bait stations should be established on likely runs by vulnerable buildings and premises. Where possible, these should be camouflaged. As well as being secure, the bait should be protected from the effects of moisture. Baits 4
- 42. householder knows their location and is aware that they must not be moved or disturbed. Children and non-target animals, such as pets, may not be present at the time of your survey and/or treatment, but may be there at other times. If this is the case, it is important to place baits in such a way to prevent contact. If adults with learning difficulties are present, you must ensure that a responsible person has been informed of the treatment regime and the risks associated with the use of rodenticides. It is good practice to leave written details about the products you have used and the actions needed if bait is consumed accidentally. based on whole grain, pellets and wax blocks are usually the most suitable for this purpose. Wax blocks and sachets should, where necessary, be secured inside bait stations. Retrieval of bait After you have finished the treatment, you must make sure all traces of bait have been removed from the site and disposed of according to the label instructions. You cannot rely on others to carry out these tasks. If you are denied access to the premises to do this, it is good practice to record when you attempted to retrieve the bait and to explain to the client in writing that responsibility for disposal has now been transferred to them. You may wish to leave details of the requirements for disposal of the rodenticide(s) that have been used. If a previous contractor has not removed the bait they laid, you should give them the opportunity to do so. If they do not do this in the time frame specified, they will have no further claim on it, but you will have a duty of care to dispose of this rodenticide safely. Rodenticide that you have retrieved from a treatment you have undertaken may be reused if it is clear that it has not been contaminated or marked by the rodents, providing it can be stored in line with the approval conditions of the product. Unprotected stores of pet food may attract rodents and householders with pets should be advised to store such food in sealed containers. Poorly constructed compost heaps and compost bins placed directly onto soil may provide harbourage for rats and should be inspected during your survey. To discourage such infestations, give householders advice on their construction (placing them on a hard flat surface such as concrete or stone paving flags) and measures to exclude rats (eg by surrounding the base with fine chicken netting). General advice on the importance of sound structural maintenance of the property (eg sealing gaps under doors and around service pipes) should be given where appropriate. Storage of bait Commercial (non-food) premises Keep all rodenticides secure in a suitable store. You should keep bait in its original packaging, except when put into a new container for use, when a current copy of the product label should be attached. It is illegal to offer such relabelled bait for sale, or supply it to others. Equipment used during treatments should be cleaned after use. Where bait is prepared from a concentrate, ensure it is labelled with the bait label supplied. The risk of infestation within commercial, non-food premises will be influenced by the work that takes place in them. A thorough survey should establish the areas that may be prone to infestation. Where catering facilities are on-site this may be an important area to examine in detail. Commercial (food) premises Under food safety legislation, owners of food premises must periodically visually check for signs of pests and have a pest control reporting system in place. This should provide you with information on any recent sightings and may provide details of previous treatments. Where you are concerned about general standards of hygiene, you may wish to discuss this with the local authority environmental health department’s food enforcement staff. Rodent-borne diseases Rodents carry diseases that may be serious or even lifethreatening to people. These may be caught by contact with surfaces or water contaminated with rodent urine. You should wear waterproof gloves when working in areas that may be infested. Cover cuts and abrasions on exposed parts of the body with waterproof dressings. Wash exposed skin thoroughly before eating, drinking or smoking and after completing work. If you cut yourself, clean and dress the wound immediately. If you regularly work in rodent-infested areas, your employer should provide you with the HSE pocket card, Leptospirosis: Are you at risk?. Alternatively, you may obtain one from HSE Books (see ‘Further reading’). Large institutions (eg hospitals, prisons etc) Large institutions may have several locations that are prone to infestation. The presence of vulnerable individuals and restricted or limited access to particular areas will need to be considered when deciding on your control strategy. On-site kitchens may be an important focus of rodent activity. If waste disposal systems for food discharge directly into the drainage/sewer system, this could act as a rich source of food for rodents. So it is essential that you do a thorough site survey and the methods and routes for disposing of food waste are established. Rodents may also invade other parts of the building when food is transported from the kitchen to where it is eaten. Service ducts may provide a route for the rapid spread of rodents through the complex and should be examined for evidence of rodent activity. If the Urban situations Domestic premises Dealing with rodent infestations in and around domestic premises poses particular problems with placement and protection of bait. It is important to explain to the householder the risks associated with the use of rodenticides. Once baits have been laid, make sure the 5
- 43. ducting is classified as a confined space, then those undertaking inspections and treatments must be adequately trained to work in confined spaces. Recommendations for training users of non-agricultural pesticides Guidance HSE Books 1990 ISBN 0 11 885548 4 Access restrictions to particular areas of the site may mean that it is not feasible to place rodenticide baits in all parts. Integrating a range of control methods, combined with close monitoring of the progress of the control programme, is essential in such locations. Guidance on storing pesticides for farmers and other professional users Agriculture Information Sheet AIS16 HSE Books 1996 Parks and gardens Dealing with rodent problems in open urban situations creates particular problems regarding the protection of bait points, particularly where rats may be associated with lakes and ponds. Place baits directly into active burrows, especially in areas where the public have restricted access, such as islands on a lake. Loose grain and pelleted formulations may be suitable for such purposes. Cover all treated holes, and regularly monitor for evidence of bait consumption, spillage or disturbance. Sewers Urban sewers provide an ideal environment for rats. A protocol agreed between the Local Government Association (LGA) and Water UK, in liaison between local authorities and water companies in England and Wales, was issued in December 1999 and should ensure better coordination of public sewer control. This is available at: www.water.org.uk/index.php?raw=88. If you are concerned about drainage defects contributing to infestations, you should report these to the local authority, who can liaise with the appropriate water authority or can serve a notice on the private sewer owners. Further advice You can get further advice on dealing with rodent infestations from rodenticide manufacturers and distributors, the British Pest Control Association (BPCA) (Tel: 01332 294288; Website: www.bpca.org.uk); the National Pest Technicians Association (NPTA) (Tel: 01949 81133; Website: www.npta.org.uk); the Chartered Institute of Environmental Health (CIEH) (Tel: 020 7928 6006; Website: www.cieh.org.uk), the Environment Agency (Tel: 08708 506506; Website: www.environment-agency.gov.uk); English Nature (Tel: 01733 455000; Website: www.englishnature.org.uk) and the Department for Environment, Food and Rural Affairs (DEFRA) (Tel: 08459 335577; Website: www.defra.gov.uk). For guidance on the legislation, consult the Health and Safety Executive (HSE) Infoline: 08701 545500; Website: www.hse.gov.uk). Further reading Leptospirosis: Are you at risk? Pocket card INDG84 HSE Books 1990 (single copy free or priced packs of 20 ISBN 0 7176 2546 X) HSE priced and free publications are available by mail order from HSE Books, PO Box 1999, Sudbury, Suffolk CO10 2WA Tel: 01787 881165 Fax: 01787 313995 Website: www.hsebooks.co.uk (HSE priced publications are also available from bookshops and free leaflets can be downloaded from HSE’s website: www.hse.gov.uk.) DEFRA leaflets Rats WM04 (DEFRA 2003) and House mice WM05 (DEFRA 2003) are available free from DEFRA’s Wildlife Administration Unit on 0845 601 4523. They are also available on DEFRA’s website at www.defra.gov.uk/wildlifecountryside/vertebrates/leaflets.htm The control of rats with rodenticides: A complete guide to best practice Central Science Laboratory. Available at www.csl.gov.uk/prodserv/cons/RatControlGuidelines.pdf The control of rats with rodenticides: Guidance for best practice Central Science Laboratory. Available at www.csl.gov.uk/prodserv/cons/RatShortGuidelines.pdf The BPCA codes of practice for operational procedures (BPCA 2002): Guidelines for the safe use of Anticoagulant Rodenticides by professional users Humane use of rodent boards Guidance note for the management of mammals and birds using live capture traps Available from BPCA Tel: 01332 294288 For information about health and safety ring HSE’s Infoline Tel: 08701 545500 Fax: 02920 859260 e-mail: hseinformationservices@natbrit.com or write to HSE Information Services, Caerphilly Business Park, Caerphilly CF83 3GG. This information sheet contains notes on good practice which are not compulsory but which you may find helpful in considering what you need to do. © Crown copyright This publication may be freely reproduced, except for advertising, endorsement or commercial purposes. First published 09/03. Please acknowledge the source as HSE. The safe use of pesticides for non-agricultural purposes. Control of Substances Hazardous to Health Regulations 1994. Approved Code of Practice L9 (Second edition) HSE Books 1995 ISBN 0 7176 0542 6 Printed and published by the Health and Safety Executive MISC515 Reprinted 11/04 Cxx
- 44. 7
- 45. Great health and safety myths The myth Risk assessment must always be long and complex The reality On its own, paperwork never saved anyone. It is a means to an end, not an end in itself - action is what protects people. So risk assessments should be fit for purpose and acted upon. OK, if you’re running an oil refinery, you’re going to need a fair amount of paperwork. But for most people bullet points work very well indeed. See what we mean - check out our example risk assessments. Go to www.hse.gov.uk/myth/index.htm to find out more No 2 May 2007