Application of a Multilevel Technology Acceptance Management Model for Effective Technology Deployment

International Journal of Computer Science & Information Technology (IJCSIT) Vol 13, No 1, February 2021
10.5121/ijcsit.2021.13105 57
APPLICATION OF A MULTILEVEL TECHNOLOGY
ACCEPTANCE MANAGEMENT MODEL FOR
EFFECTIVE TECHNOLOGY DEPLOYMENT
Gilbert Busolo, Lawrence Nderu and Kennedy Ogada
School of Computing and Information Technology, Department of Computing, Jomo
Kenyatta University of Agriculture and Technology, Nairobi, Kenya
ABSTRACT
Effective deployment of a technology in an environment is the desire of many system developers. Positive
uptake of a technology coupled with user acceptance is deemed as a key indicator towards technology
acceptance. Knowledge is weighed as a strategic resource for any successful data driven decision making
initiative. Institutions leverage on technological initiatives and tools to drive knowledge management (KM)
initiatives that enhance quality service delivery and prudent data management. These initiatives provide
the overall strategy for managing data resources. They make available knowledge organization tools and
techniques while enabling regular updates. Derived benefits of positive deployment of a technological
intervention are competency enhancement through gained knowledge, raised quality of service and
promotion of healthy development of e-commerce. Successful and timely adoption of technological
interventions through which knowledge management initiatives are deployed remains a key challenge to
many organizations. This paper proposes the application of a wholesome multilevel technology acceptance
management model towards effective technology deployment. The proposed model takes into account
human, technological and organizational variables, which exist in a deployment environment. This model
will be vital in driving early technology acceptance prediction and timely deployment of mitigation
measures to deploy technological interventions successfully.
KEYWORDS
Model, Technology Acceptance, Knowledge, Management, Multilevel
1. INTRODUCTION
The realization that knowledge is a strategic resource for success of any organization’s objectives
and its subsequent adoption though a knowledge management system (KMS) is key. Driven by
the desire of many if not all organizations to increase in quality of service, efficiency and
optimized operations has led to development and integration of technological interventions. As
technological generations change, new products whose aim is to enrich our living experience
through automation, knowledge sharing, simplified and quality decision-making with feedback
systems are continually developed. They have a rich digital repository for reference of the vast
amount of historical, current and predictive information through machine leaning in the broader
artificial intelligence concept. Uriarte (2008) defines knowledge management (KM) as the
process through which individuals, organizations and even Governments generate value from
their intellectual and knowledge-based assets. This process of knowledge creation is defined by
stepwise and continuous evolution, not one that can be compactly planned and controlled.
Emergent, motivation in which inspiration and pure change play is an important role in many
situations. In addition, it has been widely accepted among scholars that social processes heavily
influence organizational knowledge creation.

58
Kwanya, Kiplang’at & Wamukoya (2017) and supported by Fernandez & Sabherwal (2010) state
that the most vital resource of today’s enterprise is the collective knowledge residing in the minds
of an organization’s employees, customers, and vendors. Successful management of this
knowledge has many benefits to the business process. These benefits are not limited to leveraging
on core business competencies, accelerating innovation and time-to-market while improving
cycle times and decision-making. They also strengthen organizational commitment by helping to
build sustainable competitive advantage in service delivery.
From a global perspective, Talisayon (2013) examines the role and success of a technological
deployment. He notes that organizations worldwide face technological challenges as they
continue to evolve into an automated work environment. This is pushed by paperwork and cost
reduction mandates. All this is mirrored to requirements pointing towards increased workloads
with fewer personnel and the rapid addition of electronic communication channels for use. Some
of the common challenges that affect the service delivery sector include enhancing efficiencies
across all agencies, improving accountability of resources and making data driven decisions. In
addition, these technologies enhance collaboration and strategic partnerships with stakeholders,
aid in capturing knowledge from an aging workforce as well as improving operational excellence.
It is noteworthy to keep in mind that computerized knowledge management systems plays an
imperative role in providing strategies and techniques to manage institutional content, making
knowledge more accessible and usable. They provide the overall strategy to manage
organizational data resources by making available knowledge organization tools and techniques.
This aids in monitoring knowledge contents while making sure they are accessible and updated
accordingly.
Among the derived benefits of knowledge management are enhanced competence, raising quality
of service, and promotion of healthy development of e-commerce. Institutions and governments
leverage on technology to provide long-term development blueprint for attaining global
competitiveness. ICT as an enabler or foundation for socio economic transformation recognizes
the role of science, technology and innovation in modern economy. Through this, new knowledge
plays an essential role in boosting wealth creation, social welfare and international
competiveness. However, this benefit is eroded through complexities experienced when users
have challenges embracing new technologies. These efforts to embrace ICT tools in KM,
encapsulating the desire to gain a competitive edge through data driven decision making for
growth and development are at risk. Odinioha & Chukwuma (2013) underscore the pivotal
importance of quality information management in any organization. This is encouraged through
focused acquisition, storage, dissemination and its utilization. It is evident that acquisition and
application of a KMS does not guarantee its acceptance and effective use. According to Maier
(2007), he states that even though ICT can be the enabling factor in a knowledge management
initiative, there are limits to its use and the installation of a good platform does not always
guarantee success. The sure assurance that any technological implementation is positively
received and adopted is a hard question in the hearts and minds of many implementers. Great care
is given to the product development life cycle through adoption of existing system development
life cycle models. However, the greatest challenge and hindrance is acceptance of these
technologies by the end users. Feedback in the public domain shows several initiatives that
leverage on technology have fallen short notwithstanding the resources invested in their
implementation.
This paper proposes application of a multilevel technology acceptance model for effective
deployment of a technological intervention. The proposed model takes into account variables that
exist in deployment environment. These are human, technological and organizational variables.
This model is key in driving early technology acceptance prediction and timely deployment of

59
mitigation measures for successful deployment of a technological intervention. This aims at
shedding more light and demystifying the technology implementation and acceptance process.
Secondly, the researchers proposes new constructs that can be considered in a technology
implementation domain. These constructs mirror emerging trends and realities such as
mandatory systems and e-government in a technology acceptance model.
2. RESEARCH METHODOLOGY
This process involves research and collection of data from several academic and scientific
literature. Where possible, priority was given to sources that had published their data in the last
five years. This is in cognizance to the fact that Information Communication Technology world
rapidly changes and the foundations of this research are anchored on current pieces of
information and practice. Constructs derived from the literature survey provided in-depth
understanding of the technology acceptance process.
2.1. Technology Adoption
A decade old challenge in the technological world is gaining understanding as to why people
accept or reject computer systems, as these are the basic infrastructure of any system. According
to Davis, Bagozzi & Warshaw (1989), this has proven to be one of the most challenging issues in
information systems (IS) research. Investments in ICT-based tools that support planning,
decision-making, and communication processes are inherently risky. Unlike clerical paperwork
processing systems, these newer computing tools and systems often require managers and
professionals to interact directly with hardware and software. However, end-users are sometimes
unwilling to use available computer systems that, if used, would generate significant performance
gains. The acceptance and use of information systems and information technology innovations
has been a major concern for research and practice. Over the last several decades, a plethora of
theoretical models have been proposed and used to examine technology acceptance and usage,
Dwivendi, Rana, Jeyaraj, Clement & Williams (2019). Forward-looking institutions and
governments have identified ICT as an enabler and foundation for socio economic transformation
and a tool to leverage on for success. In the quest of service delivery, key and focused ICT
initiatives that leverage on acceptance of technological interventions are taking shape. In Kenya,
adoption of technology as a service enabler is experienced at Huduma Centres. This is a e-
government initiative whose aim is to provide a one-stop shop service for government products to
its citizens. Additionally other technological interventions like Kenya Revenue Authority (KRA)
Integrated Tax Management System (ITMS) and E-Citizen platform enable the public access and
pay for Government services online. All these technologies aim to enhance service delivery and
provide a citizen centric one-stop non-stop model of service.
Hwang, Al-Arabiat & Shin (2016) note that as new technologies, processes, procedures and
systems infiltrate the world, research on potential adopters and acceptance of innovations
receives attention from professionals and academic researchers. Developers of new technologies,
senior management, and those responsible for managing the changes associated with the
implementation of innovations are increasingly realizing that the lack of user acceptance can and
most probably will lead to loss of money and resources. This greatly affects an organization’s
financial standing. It is evident that change creates a sense of uncertainty and lost control.
Employees’ resistance and lack of support are some of the most cited causes for failures
associated with organizational change. This resistance represents a major barrier to organizational
benefits derived from adoption of technological innovations. The most important concern for any
manager is to ensure user buy-in through adoption of various techniques that ensure a positive
attitude and outlook towards technology. This greatly affects its usage and success. Identification

60
and adoption of correction measures that dissuade low automation levels and provide efficiency
has led to various research initiatives on models that speak to the technology acceptance process.
These aim to demystify complexities experienced when users have challenges embracing new
technologies. This trend is observed as institutional systems around the world are incorporating
technology as a core enabler towards growth, productivity and global competitiveness, Scherer,
Siddiq & Tondeur (2018).
Great strides in technological investments and interventions are evident. Lessons learnt from
previous failures in acceptance and adoption of these technological interventions have turned the
focus to technological models that deal with prediction of user behavior. This gives out data that
informs the decision whether to adopt the technology, apply modifications to it or reject it in its
totality, Aizstrauta, Ginters & Eroles (2015). Discourse about benefits derived through adoption
and acceptance of technology for any institution has been positively framed with a view that
technology predominantly empowers societies. These are through savings on time, reduced costs
and enhanced possibilities. Lowe, Dwivedi & D’Alessandro (2019).Technology acceptance
models strive towards deconstructing user attitude and behavior that consequently affect
acceptance, use, performance and ultimately success or failure of any new technology.
2.2. Technology Adoption Models
The acceptance and increased utilization of technological innovations are crucially beneficial for
both the service provider and user during the whole process of engagement, Gucin & Berk
(2015). Maier (2007) notes that success of any information system cannot be measured directly,
but has to be assessed using a number of measures which are relevant for success. He notes that
since the 70s, many authors have developed approaches to assess the success of an IS through
several proposed variables, indicators and measures. As the researchers ponder on the time long
challenge of technology rejection, this concern led to the study of several models that aim to
explain computer acceptance and usage behavior. A technology adoption model explains the
acceptance and consequent use of a technological intervention.
2.2.1. Theory of Reasoned Action
Theory of Reasoned Action (TRA) is an extensively studied model from the field of social
psychology. It greatly concerns itself with the determinants of consciously intended behaviors. It
deduces that a person‘s performance of a specified behavior is determined by his or her
behavioral intent to perform the behavior and this is jointly determined by the person‘s attitude
and subjective norm concerning the behavior as first studied by Davis, Bagozzi and Warshaw and
cited in Lai (2017). In 1967, Martin Fishbein first introduced TRA, Ajzen & Fishbein (1980) with
an aim of bringing clarity to behavior of an individual in a voluntary environment. It picks
beliefs, attitudes, intentions and behaviors as the main variables, articulating their relationship
amongst one another in determining the end motivation that leads to an individual’s action.
Being a well-researched but general intention model, Lai (2017) that has been quite successful in
the prediction and enlightenment of human behavior in a variety of domains, it should therefore
be an appropriate choice model for reviewing computer usage determinants. Quite interestingly,
TRA being a general model as shown in Figure 1 does not specify the beliefs that are operative
for a particular behavior. To adopt it, researchers first identify beliefs that are salient for subjects
regarding the behavior under investigation. Davis, Bagozzi & Warshaw (1989) continue to clarify
that the model proposes five to nine salient beliefs, gathered through free response interviews
with representative members of the subject population. These beliefs are most frequently elicited
from a representation of the sample population considered for use.

61
Greene (2009) expounds that the development of TRA was to explain influences of several
variables on behaviors that involve non-mandatory decision-making. Behaviors that are
impulsive, habitual, or scripted are specifically excluded. TRA is not advised to be deployed
where expounding of behaviors that are mandatory in nature like a frequent traveler getting
through airport security but the theory is aptly applied to behaviors that the individual has some
level of choice on the type of decision to be made. This aspect has been noted as a limitation to
the theory as its focus and scope of application is on voluntary behavior.
Figure 1: Theory of Reasoned Action (Lai, 2017)
Person’s Performance = Behavioral Intent (BI)
According to Greene (2009), Behavioral Intent (BI) that revolves around a person’s plans,
motivations or desires are the immediate forecaster of how one will behave. An individual’s plan
or activity revolves around an intention to accomplish something. A precursor of the proposed
result is planning and accomplishing activities that make way for smooth execution of the main
plan. A good analogy is the intent to further ones education is precipitated by the desire to
increase in skill and consequently have a better life. When broken down, it entails looking for a
good institution of higher learning, availing resources for the venture, prioritizing and
rescheduling ones activities for the duration of the course, applying for the course among other
foundational undertakings. The intent component greatly affects person’s performance and choice
of course as the theory can be applied in a KM environment to gauge the level of acceptance of a
proposed technological intervention. As intentions can change depending on other conditions, it
is a good component to tap on for positive behavior change, influencing an individual to
undertake a positive action.
Behavioral Intent (BI) = Attitude (A). Subjective Norm (SN)
Greene concurs that intentions result from underlying attitudes and subjective norms therefore
they are not independent. An attitude being a general orientation toward a behavior based on a
variety of beliefs and evaluations is determined by identification of a set of relevant beliefs,
measuring their strength or certainty of these beliefs, and measuring their evaluation. Then the
measures are summed together resulting in an attitude measurement. Attitudes are specific to
performing a particular behavior. To determine an attitude, belief strength and evaluation are
empirically weighted for a specific behavior and group before they are added together. These
relative weights are discovered through surveys of individuals in the target audience about a
behavior. The importance of attitudes, as determined through surveys, is helpful in designing
intervention drives to address the component that best predicts behavioral intentions. Subjective
norms being the social component of behavioral intentions are composed of normative beliefs
that are influenced by the view of other people concerning that behavior and the drive to comply
with the directive or task at hand. Depending on the issue at hand, influence may be heavier from
one quarter than from another quarter hence influencing the direction of action of the person. The

62
pressure to be in good standing with a group of people or a certain individual has great impact in
a decision.
Attitude towards Behavior (A) = ∑ Salient Beliefs (b1). Evaluations (e1)
Salient behavioral beliefs held to determine the attitude toward the behavior and the envisioned
consequences of performing that behavior. Salient normative beliefs (beliefs about the views of
significant others) are held to determine subjective norm. Salient control beliefs (beliefs about
factors that may facilitate or impede performance of the behavior) are assumed to determine
perceived behavioral control. Salient beliefs are those that first come to an individual’s mind as
repercussions of performing a certain act or engaging in a specific activity, Sutton et al. (2003).
The behavioral beliefs can be either positive or negative. An individual can believe that
technology will ease the process of doing work but may also believe that computer use will affect
his eyesight or even increase chances of getting cancer. Evaluations are appraisals taken by the
individual attached to a behavioral outcome or attribute. This includes negative or positive views
about the behavior and greatly contributes to attitude along with behavioral beliefs.
Subjective Norm (SN) = ∑ Normative Beliefs (nb1). Motivation to Comply (mc1)
Davis, Bagozzi and Warshaw (1989) and Lai (2017) agree that an individual‘s subjective norm is
determined by a multiplicative function of his or her normative beliefs that are guided by
perceived expectations of specific referent individuals or groups. This is greatly determined by
social pressure and affects his or her motivation to comply with these expectations. This is
influenced by the presumed perception of what others think of the issue at hand. Fishbein and
Ajzen (1975) rank TRA as a general model as it does not specify the belief parameters that are
operative for a particular behavior. In its application, researchers have first to undertake the task
of identifying the beliefs that are outstanding for subjects regarding the behavior under
investigation. They do recommend researchers to identify and engage with a minimum of five
and a maximum of nine salient beliefs using free response interviews to elicit data with
representative members of the subject population. It is recommended that the beliefs most
commonly elucidated from the sample population be used. During research and application of
TRA, its main drawbacks arise from lack of addressing the role of habit, cognitive deliberation
and usage voluntariness, Taherdoost (2018).
2.2.2. Technology Acceptance Model
Technology Acceptance Model (TAM) is a less general adaptation of TRA introduced in 1986 by
Davis and heavily researched in this day and age, Hwang, Al-Arabiat & Shin (2016). It has a
specific application area for modelling user acceptance in an information systems environment as
an early stage user acceptance tool. This model is envisaged to provide an understanding of the
parameters that influence computer acceptance that are general, capable of explaining user
behavior across a broad range of end-user computing technologies and user populations, while at
the same time being both parsimonious and theoretically justified. According to Davis, Bagozzi
& Warshaw (1989) and Hwang et al. (2016), TAM posits that two particular beliefs, perceived
usefulness and perceived ease of use are of primary relevance for computer acceptance behaviors
as shown in Figure 2 below.

63
Figure 2: Technology Acceptance Model (Hwang, Al-Arabiat & Shin, 2016)
TAM model revolves around these two parameters to determine attitude towards using a
technological intervention. This is underscored by Scherer et al. (2018) pointing out that
perceived usefulness and perceived ease of use are considered as the key variables of TAM as
they generally describe the outcomes when applied in a technological environment. These are
perceived usefulness and perceived ease of use as the main determinants towards technological
acceptance behavior as illustrated below.
Attitude (A) = Perceived Usefulness (U) + Perceived Ease of Use (E)
Davis, Bagozzi & Warshaw (1989) defines the two major TAM identifiers, Perceived Usefulness
(U) as the prospective user‘s subjective probability that using a specific application system will
increase his or her job performance within an organizational context. Perceived Ease of Use
(EOU) refers to the degree to which the prospective user expects the target system to be free of
effort. The Perceived Usefulness and Ease of Use are intertwined and affect each other because
when a user positively identifies and feels that a system is easy to use to achieve the set
organizational goals, then the system becomes useful for them, hence having a positive attitude
towards technology and influencing behavior.
Behavioral Intention to Use (BI) = Attitude towards Using (A) + Perceived Usefulness (U)
The relationship between Attitude (A) and Behavioral Intention (BI) commonly referred to as
The A-BI relationship implies that when all other factors are constant, system users will form an
intention to use a technological intervention, which they perceive to have a positive effect on
them. Attitude is recognized as a major factor that influences technology acceptance or rejection
during deployment and subsequent use. The U-BI relationship between Perceived Usefulness (U)
and Behavioral Intention (BI) is grounded on the idea that in an organization setting, users form
an intention on behavior that they believe when undertaken, will generally increase their work
performance over any other positive or negative perception evoked. The base reason being that
achieving good results in such an environment like a work environment is instrumental to
acquiring other rewards that are extrinsic to the content of the work itself, such as better pay or a
higher grade through promotions.
Perceived Usefulness (U) = Perceived Ease of Use (E) + External Variables
Any technological intervention deployed that offers an easy to use interface, defined and logical
workflows and systems that enable the user to accomplish more work with less effort is perceived
as easier to use. One that outputs high quality graphs with detailed precision scores better. This
enables improved performance when leveraging on technology and directly affects perceived
usefulness. Additional features that ease the interaction between the system functionalities and
the user while achieving the set system objectives enhance usability. When the external variables
in the operating environment are conducive, optimally supporting technological interventions, the
expected output will be quite positive. External factors in the operating environment that impinge

64
on the optimum working atmosphere and environment hinder the perceived usefulness of that
technology and by large the user may form a negative attitude towards technology.
Perceived Ease of Use (E) = External Variables
There is a direct correlation between Perceived Ease of Use (E) and External Variables that are
present in the deployment environment. External Parameters like experience working on
computer systems, years spent on automated systems, exposure to technology among others
greatly influence the user’s perspective on how easy or difficult it is to use the system. A system
which is positively evaluated is more acceptable and useable, Hwang et al. (2016). Davis (1993)
encourages more research on the role of additional TAM variables for the model to be more
responsive to technological environments that have more parameters that greatly influence the
acceptance and deployment of technology. Parameters like choice in a mandatory environment is
a key variable that influences attitude as the user has to interface with the system for daily work
irrespective of his attitude towards it. One of the greatest drawback of TAM is its inability to
inform the implementation process, Hwang et al. (2016).It leans heavily towards user acceptance,
leaving out system designers and project implementers. For TAM to continue being relevant to
modelling user interactions with technology, researchers are called to consider it as a basic model
that offers the benefit and flexibility of integrating extended and contextualized motivational
influences and user behaviors based on emerging realities in contemporary technological
environments, Lim (2018). For clarity in understanding and adoption of TAM, the model should
be augmented with new variables that are context specific to the application environment and
mirrored with the times, Lowe et al. (2019) to provide more consistent prediction of system use,
Taherdoost (2018).
2.2.3. Task Technology Fit Model
Goodhue and Thompson as cited by Lai (2017) ponders on the linkage between information
technology adoption and its corresponding effect on individual performance on a given a task.
The Task Technology Fit Model (TTF) as shown in Figure 3 below underscores the degree to
which a technology deployment assists an individual in performing his portfolio of tasks. An
important factor to note with TTF is that there is little explicit recognition that more utilization of
a system will not necessarily lead to higher performance. Utilization of a poor information system
will not improve an individual’s performance. TTF draws its constructs from two assertions;
utilization of a technology and the leveraged technology should be a good fit to the task deployed
as predictors of performance.
Figure 3: Task Technology Fit Model (Lai, 2017)
Utilization of a technological intervention is based on human perspective and other situational
factors like attitude, behavior, perceived satisfaction and social norm. These factors affect the
initial technological perspective when a system is introduced and continue having weight on its

65
repeated utilization. From this theory, it is implied that increased utilization of a system having
positive human outlook impacts positively on its performance rating. When a technological
intervention offers features that are just right for the purposed task, the user will feel that this is
the technological tool of choice, hence the fit. This perceived sense of a tool that eases the task
load through features that break down the task into doable subtasks while simplifying the whole
process optimally leads to better utilization and performance. The level of technological fit is a
strong predictor of better performance. Further research on the TTF model by Goodhue &
Thompson (1995) led to Technology to Performance Chain theory (TPC) as shown in Figure 4.
This is a more individualized model that looks at both the technology and its utilization in
relation to its relevance to the perceived task. Its underlying mantra is that technologies must be
utilized and fit the task they support to have a performance impact. It provides clear relationship
on the technological, user tasks and utilization variables as they relate towards progressive or
retrogressive performance. It is important to note that in as much individuals embrace
technological tools to accomplish given tasks, the individual’s characteristics could greatly
influence how well the technological utilization will be. Some of these individual characteristics
are motivation, prior training and experience with technological interventions.
Figure 4. Technology to Performance Chain Model (Goodhue and Thompson, 1995)
2.2.4. Unified Theory of Acceptance and Use of Technology
Unified Theory of Acceptance and Use of Technology (UTAUT) technology acceptance model
was formulated out of the gaps experienced with the use of several technology acceptance
models. Venkatesh, Morris, Davis & Davis (2003) comprehensively reviewed eight technology
acceptance models and formulated a unified model as shown in Figure 5 after data synthesis,
whose aim was to integrate elements across the eight models while addressing their
shortcomings. The eight models reviewed were the technology acceptance model by Davis

66
(1989), the theory of reasoned action by Fishben & Ajzen (1975), the motivational model by
Davis, Bagozzi & Warshaw (1992). In addition, the theory of planned behavior by Taylor &
Todd (1995), the model of PC utilization by Thompson, Higgins & Howell (1991), the innovation
diffusion theory by Moore & Benbasat (1991), the social cognitive theory by Compeau &
Higgins (1995) and a combined version of technology acceptance model (TAM) and theory of
planned behavior were reviewed. They used data drawn from four different organizations over a
period of six months and conducted their research based on three points of measurement. This
research was borne out of an observation that several underlying concepts drawn from technology
acceptance theories were inherently comparable, Zhou, Marfo, Antwi, Antwi, Kachie & Wireko
(2019).
Figure 5: UTAUT Research Model (Venkatesh, Morris, Davis & Davis 2003)
The eight choice models were adaptable to only between 17 percent and 53 percent variance in
the results concerning user intentions on their use of information technology, Venkatesh et. al.
(2003). From these findings, the proposed UTAUT technology acceptance model was applied to
the original data and fared better, outperforming the eight models with adaptability of 69 percent.
Four constructs stood out and were earmarked as indicators that were direct determinants towards
technology acceptance. These were performance expectancy, effort expectancy, social influence
and facilitating conditions. Venkatesh et. al. (2003) in their research concluded that attitude
towards using technology; self-efficacy and anxiety did not meet the threshold to be considered
as main determinants towards intention of using a technological intervention. The UTAUT
research model was as shown in figure 5 above.
Dwivedi et al. (2019) and Venkatesh et al. (2003) expound performance expectancy as the degree
or weight to which an individual believes that using a particular technological intervention will
enable the user attain gains in their work performance and subsequently, their output. The term
performance expectancy is drawn from the amalgamation of five factors that were weighed in the
formation of perceived ease of use during research on technology acceptance model. These five
constructs are external motivation, job fit, relative advantage as well as outcome expectancy,
Venkatesh & Davis (2000). Noted as a positive factor towards technology acceptance and use,
performance expectancy construct has received a lot of attention and research, Hamzat &
Mabawonku (2018).

67
Effort Expectancy is the level of ease experienced when a technology is in use, Alam, Hu & Gani
(2019). A technology whose effort expectancy is good exhibits ease of use tendencies. Users feel
drawn to such system and the observed percentage of acceptance to such systems is usually high
making adaptation to these technologies easier. This construct can be applied in environments
that exhibit voluntary and also mandatory tendencies. Some of the techniques that effort
expectancy can be achieved is through easy to use interfaces and user involvement during
technology development and deployment, to the level where the user feels familiar with the
technology and believes that the system is easy to use to deliver the set objectives. Effort
expectancy is derived from three constructs: perceived ease of use, complexity and ease of use,
Alam, Hu & Gani (2019) and Venkatesh et. al. (2003).
Social influence is explained as the degree at which a user believes that the technology adapted is
easy to use based on the views of others concerning that technology. Venkatesh et. al. (2003)
expounds it as the degree to which a user perceives that others who hold an important role believe
that he or she should use the new system. This construct is directly fed from subjective norm,
social factors and perceived image derived when one uses the new technology. This construct
generally is adaptable when a technology is deployed in mandatory conditions and is experienced
due to the fact that the user has not yet had any or minimal interaction with the system.
Consequently, his views are based on other people’s views, who may have had a higher level of
interaction with it. Normally, this position changes when the user gets to use the system and from
the personal interaction, a solid view of the system is derived.
The degree to which a user believes that there exist enough organizational and technical
infrastructure to support the use of the new technology is referred to as facilitating condition,
Alam, Hu & Gani (2019) and Venkatesh et. al. (2003). During development and deployment of
any system, it is prudent to consider the environmental and technological system use needs for
removing any obstacles that may cause technology rejection. Deployment of a good technological
intervention in an environment that is not ready or responsive to its adoption and optimum use is
already a recipe for failure. As the important system development factors are dealt with, a keen
look should be given to the environmental and technological optimal system use needs for
successful technological deployment.
Alam, Hu & Gani (2019) underscore the pivotal need for high reliability and maintainability of
any technological intervention during its lifetime. This is an important factor of any system and
in the extended UTAUT model, it comes out clearly as perceived reliability which is critical to
user acceptance, satisfaction and usage. The costs associated with acquisition, use and
maintenance of technological interventions is a pivotal factor to consider when considering any
system. Growing needs and changes in the operational environment call for changes in the
structure of any system. This may be new laws governing the use of the technology, changed
business model or just upgrades for increased dependability, safety and quality of service call for
periodic maintenance and updates. Users therefore are quite aware of these needs and their
corresponding financial effect on the overall budget for maintenance. In this regard, the extended
UTAUT model includes price value and perceived reliability as key constructs in addition to
performance expectancy, effort expectancy, social influence and facilitating condition in its
matrix.
2.3. Findings of the Study
The researchers summarizes the choice models as shown in Table 1 below:

68
Table 1: Choice Models Comparison
Summary Findings
Construct Application Area Strengths Limitations
Theory of Reasoned Action (TRA)
a) Beliefs
b) Attitudes
c) Intentions
d) Behaviors
e) Subjective Norm
Social Psychology.
Used to determine
consciously
intended behaviors
Extensively
studied model on
consciously
intended
behaviors
a) Difficult to implement in
environments where choice is
limited.
b) Sufficiency of attitudes and
subjective norm to clearly predict
behaviors.
c) Does not address role of habit.
d) Does not address role of
cognitive deliberation
Technology Acceptance Model (TAM)
a) Perceived
usefulness
b) Perceived ease of
use
Modelling user
acceptance in and
information
systems
environment
Widely applied
model in
information
technology
environments
with several
adopted variations
to it
a) The two variables do not aptly
represent and model current
technological environments.
b) Focuses more on user, not
operating environment
c) No variable represents design
process or informs
implementation phases
Task Technology Fit (TTF)
a) Utilization of a
technology
b) Technology Fit
Technological
environment
Adaptable to new
products already
in the market
a) Difficult to implement in
environments where choice is
limited.
b) Utilization of a system with
low TTF will not increase
performance.
Unified Theory of Acceptance and Use of Technology (UTAUT)
a) Performance
Expectancy
b) Effort Expectancy
c) Social Influence
d) Facilitating
Conditions
Technological
environment
Uses moderators
of gender, age,
experience and
voluntariness of
use that can be
adjusted
according to
environment.
a) Scales used to measure the
constructs are not conclusive.
From the literature review, it is evident that technology acceptance models mostly focus on one
dimension of implementation. We can see that greater focus has been given only to the user, the
proposed technology or the task to be automated. In addition, most system developers leverage
on the software development lifecycle process that primarily focusses only on the software
product. These gaps informed the development of a multilevel technology acceptance
management model that encompasses more variables that exist in a deployment environment.
Quite noteworthy, the deployment of a technological intervention into an environment that is not
wholesomely ready erodes the anticipated gains.
The objective of this research was to propose the application of a multilevel technology
acceptance management model that takes into account human, technological and organizational
variables. Review of existing models and their limitations aim to provide deeper reason for
research on a model that mitigates the identified limitations. Identification and application of new
constructs that exist in a deployment environment is pivotal to this research as it brings a better
understanding of the deployment environment. Successful deployment of technologies through

69
early technology acceptance prediction and timely deployment of mitigation measures is the
desire of many organizations. The proposed model that incorporates new constructs aim at
explaining technology acceptance of emerging technologies such as e-government, internet-of-
things, e-board and Enterprise Resource Planning Systems. This is grounded in the need for a
comprehensive understanding of IT adoption and factors that determine its success or failure.
2.4. Proposed Multilevel Technology Acceptance Management Model
Derived from analyzing the choice models while mirroring this knowledge to the current
deployment environment, the researchers propose a multilevel technology acceptance
management model as illustrated in Figure 6. Every system project manager would love to be
able to predict whether the technological deployment will be acceptable to the envisioned users.
Davis, Bagozzi & Warshaw (1989) laid a foundation to this discussion by recommending that a
model should also be in a position to diagnose the base reasons why a proposed system may not
be fully acceptable to the users. It should also provide an opportunity for corrective action to be
taken thus increasing acceptability of a technological intervention. This will increase business
impact, saving time and resources that would otherwise go to waste deploying and supporting a
system that is unproductive and not supportive to the business goals.
Taherdoost (2018) explains that although a number of models and frameworks have been
developed, explaining user adoption or rejection of new technological interventions needs more
than one theoretical approach for a wholesome understanding. This creates a cumbersome
process and consequently, need for a model that when applied, encompasses most of the possible
variables that exists in a deployment environment is key. The apparent need for further research
into models that provide an ever-richer understanding of technology adoption is key. This is
proposed through consideration of constructs that relate to each other with representation from
the human, technological and organizational perspective. The proposed model aims to bring more
clarity to technological deployment process through assessing key parameters derived from the
deployment environment. It groups the key variables into three main categories:
i. Human variables
ii. Technological variables
iii. Organizational variables
It is envisioned that this will bring understanding and inform the technology deployment process
on the parameters and key variables that need to be focused on for technology acceptance. The
proposed variables with their corresponding factors are synthesized into a multilevel knowledge
management acceptance model that forms a foundation for the study. The illustrated model below
depicts the three multilevel dimensions towards technology acceptance.

70
Figure 6. Proposed Multilevel Technology Acceptance Management Model
It has been observed that the application of variables to TAM that are dependent to the
application environment address its limitations and potentially confirm its robustness and
generalizability, Fayad & Paper (2015).
2.4.1. Human Variables
Research shows that the level of end-user satisfaction with an information technology
intervention has widely been accepted as an indicator of IT success. This is according to
Mahmood, Gemoets & Jacquez (1999). These variables are human related characteristics such as
beliefs, attitudes, intentions, perceived ease of use and perceived use that directly have emotional
impact the user’s perceived value of the system. Variables such as age of the user, their gender
and image have a direct bearing on where the individual places himself in terms of personal
relevance to technology. Computer literacy and exposure to technology, perceived personal
security from any technology related harm, user involvement in the system development process
brings about a sense of ownership to the proposed technological deployment, the user feels they
have a part to play towards technological success and are more inclined towards technology use.
User acceptance and satisfaction, a key ingredient in technology adoption starts at the point
where the individual’s perception concerning technology is positive and its perceived value is
high.
2.4.2. Technological Variables
Technology related variables encompass the technological need on the ground and the solutions
availed through a technological intervention. Deployments of technological solutions increase

71
day by day as the world finds an easy partner to a myriad of challenges in technology. Being
enlightened on the antecedents of technology use early enough during the development and
deployment process informs key project steps and is a recipe for success. In as much as the world
recognizes technological inventions as a sure bet on easing many processes, that are characterized
as loads, the level of acceptance of these interventions is quite wanting and a major concern to
product developers and solution providers. When a user perceives technology as a positive tool in
their sphere of operation, he will evaluate the technological capabilities and risks associated with
its adoption. Variables such as technology utilization in accomplishing the laid objectives,
technology fit to the projected tasks, system functionality to accomplish the desired procedures
endear a user and underscore the usefulness of technology. System interfaces that are easier to
navigate to achieve the set goals increase system utilization. Perceived and actual period that the
system will be in use plays an important factor in its acceptance.
A balance should be sought on time and frequency of use for maximum gains. As all systems
have an input and output, the quality of system output should reflect the effort infused in the
input process. A clear, concise, comprehendible and quality output should be the target for any
technological intervention. The data in use should be secure from instances that may compromise
its quality. The constant worry of any organization when deploying any technological
intervention is the availability of technical support for the product over a period of time. This
includes but is not limited to availability of periodic updates, upgrades and support when the need
arises. Any technological system that does not have an established support base is destined to fail
and its level of acceptance may be below par.
2.4.3. Organizational Variables
Every technology operates in its required environment. The process of deploying technology may
be successfully controlled with key acceptance variables dealt with early enough to ensure all-out
acceptance and business gains derived from it. During deployment and operations, other external
factors that may be within or beyond the scope of management may change influencing the
technology adopted either positively or may negate the gains derived through its adoption.
Organizational policies should be friendly to technology adoption through decisive policy
statements that support adoption and deployment of relevant technologies that aid in fulfilling the
goals of any institution. These should be enablers that give flesh to fulfilling organizational
strategies and goals. Laws governing the use of any technology should be well balanced to accord
users an equilibrium, gaining the benefits of technological adoption while shielding them from
instances of abuse, harm and insecurity. Top management attitude towards technology dictates
how far technology adoption and use in any organization goes. Formulation of strategies and
policies that encourage technology adoption and harness its use in organizational procedures is a
recipe for success. Set incentives and rewards to users who leverage on technology to accomplish
tasks increases its adoption and frequent use.
Laws set and reviewed by the legislature should be void of collisions with adoption of
technology, but rather encourage its use. Regulations that clearly spell out procedures like
conveyance should be amended to encompass use of technology as an enabler to quality service
delivery. Yearly, the government requires all of its citizenry with personal identification numbers
to file tax returns. Great efforts through capacity building campaigns and awareness is vigorously
conducted in the social space but still the response to this exercise is below par with unmet
targets. The mandatory or voluntary nature to the adoption and use of any system directly
influences the user perception towards it. Induction and training on use of technology helps
bridge technology related fear and enables the user appreciate its use in achieving the set goals.
All these deployments should be in a controlled environment and should not cause any harm to

72
its users or environment. Any perceived threats should be addressed in a sober, informative and
inclusive manner to the benefit of its adoption. The way an organization handles its internal and
external (environmental) variables reflect on its readiness on the adaption of technology. How a
country or organization handles these external variables directly affect the perception towards
technology adoption and subsequent use. Every system has users, the system itself has some
technical capabilities and all these exist in an environment that the user cannot exclusively
control. It is pivotal for any successful technological adoption, these three variables be keenly
appreciated as they directly affect human perception towards technology and its successful use.
The model inculcates feedback as a key element in adoption, successful acceptance, usage, and
further upgrades that may be undertaken for making the technological intervention more
responsive to user needs. Feedback mechanism may also influence the variables in the three
groupings as each deployment environment has unique users, deployed technology and external
variables and therefore is not exhaustive. This model is more suited for a technological
deployment environment.
2.5. Application of the Multilevel Technology Acceptance Management Model
The desire for a successful technological deployment is a major concern to many technology
implementers. This has led to development of a model that provides new variables that span
beyond the human focus of the reviewed models. Data derived through application of this
multilevel technology acceptance management model illuminates the deployment process
through data driven decision-making efforts. Flagging out key areas that may need focus and
greater attention for a fruitful deployment is made possible through adoption of independent
variables for a more inclusive and comprehensive evaluation when testing the dependent variable.
The developed model aims to provide a better understanding of the deployment environment and
candidate system through variables that exist in a deployment environment. This assures of a
wholesome deployment experience. Great focus is given not only to the users or to the
prospective software tool, but also to all factors that exist in that environment that may make or
break the deployment process. We all aim to get it right the first time when implementing a
technological deployment and this model provides a clear path to that.
In addition, this model stimulates more research on technology adoption and a drive for deeper
understanding of relationships among variables, technologies, users and their technological
environments.
2.6. Further Research
As the world continues to embrace technology, different technological application areas exist.
These deployments sometimes are not successful due to inconclusive and comprehensive data
driven understanding of the pivotal variables that exist in that environment. This calls for further
research and validation of the proposed model with its constructs for a robust and more inclusive
technological acceptance model. This may include specific application environments like health
and education as this may bring rise to different constructs that are technological environment-
specific while maintaining a wholesome outlook to the technology acceptance process.
3. CONCLUSIONS
Institutions and individuals desire to get it right the first time when implementing a technological
deployment. This desire led the researchers to propose a model that provides new variables that
span beyond the human focus of the reviewed models. The proposed model when applied to a
technological intervention environment hopes to provide a better understanding of the

73
deployment environment and candidate system. Data derived from the proposed model aims to
illuminate the adoption path through data driven decision-making efforts. The proposed model
adopts independent variables for a more inclusive and comprehensive evaluation when testing the
dependent variable. In addition, this stimulates research and a drive for deeper understanding of
user relationships with newer technologies in their technological environments.
REFERENCES
[1] Uriarte F. A (2008). Introduction to Knowledge Management, Jakarta, Asean Foundation.
[2] Kwanya T. Kiplang’at J. & Wamukoya J (2017). Emerging Trends in Information and Knowledge
Management, Eldoret, Moi University Press.
[3] Fernandez, I.B & Sabherwal, R (2010). Knowledge Management systems and Processes, New York,
Armonk Publishers.
[4] Talisayon S. (2013). Knowledge Management for the Public Sector, Tokyo, Asian Productivity
Organization.
[5] Odinioha, G.J and Chukwuma, O.L (2013). The International Journal of Management, Volume 2,
Issue 3, Port Harcourt, Wiley-Blackwell Publishers.
[6] Maier R. (2007). Knowledge Management Systems, Third Edition, Innsbruck, Springer. DOI
10.1007/978-3-540-71408-8.
[7] Davis F., Bagozzi R. & Warshaw P. (1989). User Acceptance of Computer Technology: A
Comparison of Two Theoretical Models, Michigan, Ann Arbor, Institute of Management Science.
[8] Dwivendi Y. K, Rana P.N. Jeyaraj A., Clement M. & Williams M. D. (2019). Re-examining the
Unified Theory of Acceptance and Use of Technology (UTAUT): Towards a Revised Theoretical
Model. 21, 719–734. DOI 10.1007/s10796-017-9774-y.
[9] Hwang, Y. Al-Arabiat M. & Shin, D.H (2016). Understanding Technology Acceptance in a
Mandatory Environment, UK, Sage Publishers.
[10] Scherer R., Siddiq F. & Tondeur J. (2018). The Technology Acceptance Model (TAM): A Meta-
analytic Structural Equation Modelling Approach to Explaining Teachers’ Adoption of Digital
Technology in Education: Norway, Elsevier.
[11] Aizstrauta D., Ginters E. & Eroles M. P (2015). Applying Theory of Diffussion of Innovations to
Evaluate Technology Acceptance and Sustainability. 43. 69-77. DOI 10.1016/j.procs.2014.12.010.
[12] Lowe B., Dwivedi Y. & D’Alessandro S. (2019). Consumers and Technology in a Changing World.
Retrieved 28 December, 2019 from https://kar.kent.ac.uk/73789/.
[13] Gucin N. O.& Berk O. S. (2015). Technology Acceptance in Health Care: An Integrative Review of
Predictive Factors and Intervention Programs. 195, 1698-1704. DOI 10.1016/j.sbspro.2015.06.263.
[14] Lai P. C (2017). The Literature Review of Technology Adoption Models and Theories for the
Novelty Technology, Electronic Journal of Information Systems and Technology Management, 14(1),
21-38, Retrieved 20 April, 2019, from http://www.jistem.fea.usp.br
[15] Ajzen, I., & Fishbein, M. (1980). Understanding Attitudes and Predicting Social Behavior.
Engelwood Cliffs, NJ, Prentice Hall.
[16] Greene K., (2009). Reasoned Action Theory Scope Components, New Jersey, Rutgers University
Press.
[17] Sutton, S., French, D.P., Hennings, S.J. et al. Curr Psychol (2003). 22: 234. DOI.org/10.1007/s12144-
003-1019-1.
[18] Fishbein, M., & Ajzen, I. (1975). Belief, Attitude, Intention, and Behavior: An Introduction to Theory
and Research. Reading, MA: Addison-Wesley.
[19] Taherdoost H. (2018). A review of Technology Acceptance and Adoption Models and Theories. 22.
960-967. DOI 10.1016/j.promfg.2018.08.137.
[20] Davis, F. D. (1993). User Acceptance of Information Technology: System Characteristics, User
Perceptions And Behavioral Impacts. International Journal of Man-Machine Studies, 38, 475-487.
DOI:10.1006/imms.1993.1022.
[21] Lim W. M (2018). Dialectic Antidotes to Critics of the Technology Acceptance Model: Conceptual,
Methodological and Replication Treatments for Behavioral Modelling in Technology-Mediated
Environments, Swinburne, Australasian Journal of Information Systems
[22] Goodhue D. L & Thompson R. L (1995). Task-Technology Fit and Individual Performance,
Management Information Systems Research Center, University of Minnesota.

74
[23] Venkatesh, V., & Davis, F. D. (2000). A Theoretical Extension of The Technology Acceptance
Model: Four Longitudinal Field Studies. Management Science. 46 ( 2) 186-204.
[24] Venkatesh V., Morris M. G., Davis G. B. & Davis F. D. (2003). User Acceptance of Information
Technology: Toward A Unified View, MIS Quarterly, Volume 27 (3),425-478.
[25] Taylor S & Todd P. A. (1995). Understanding Information Technology Usage: A Test of Competing
Models. The Institute for Operations Research and the Management Sciences,
DOI:10.1287/isre.6.2.144.
[26] Zhou L. L., Marfo J. O., Antwi H. A., Antwi M. O., Kachie A.D. & Wireko S. A. (2019).
Assessment of the social influence and dacilitating conditions that support nurses adoption of hospital
electronic information management systems (HEIMS) in Ghana using the unified theory of
acceptance and use of technology (UTAUT) model. Retrieved 20 January, 2020.
DOI.org/10.1186/s12911-019-0956-z.
[27] Hamzat S. & Mabawonku I. (2018). Influence of Performance Expectancy and Facilitating
Conditions on use of Digital Library by Engineering Lecturers in universities in South-west, Nigeria.
Library Philosophy and Practice (e-journal).1620. from
https://digitalcommons.unl.edu/libphilprac/1620
[28] Alam M. Z., Hu W., & Gani M. O. (2019). An Empirical Analysis of the Influencing Factors of
Adoption of Mobile Health Services in Bangladesh Based on Extended UTAUT Model. WHICEB
2019 Proceedings. 53 from https://aisel.aisel.org/whiceb2019/53
[29] Fayad R. & Paper D. (2015). The Technology Acceptance Model E-Commerce Extension: A
Conceptual Framework, Lebabon, Elsevier.
[30] Mahmood M. A., Gemoets L. A., & Jacquez C. (1999). Variables Affecting Information Technology
End-User Satisfaction. DOI:10.1006/ijhc.1999.0353.
AUTHORS
Gilbert Busolo Lusweti
Results-driven professional offering a progressive result driven fifteen -year career
in Information Technology. A process improvement champion with a history of
implementing procedures and technologies to enhance operational efficiency, value
addition and quality based decision making through systematic automation and
digitization efforts. Currently a MSc. Student at Jomo Kenyatta University of
Agriculture and Technology, focused on Technology Adoption and Knowledge
Management.
Dr. Lawrence Nderu
Experienced University Lecturer with a demonstrated history of working in the
higher education industry. Skilled in Software Development, (Python, Java, C#,
C++, R, JavaScript, Android, PHP, C++, and Databases. Strong education
professional with a Doctor of Philosophy - PhD focused in Computer Science from
University of Vincennes in Saint-Denis, Paris, France. Research Interest on Artificial
Intelligence, Data Science and Software Development. Goal: Technology for
building the resilience of communities.
Dr. Kennedy Ogada
Champion for effective and efficient Data Mining classification techniques.
Experienced University Lecturer on Information Technology, Information Policy,
Telecommunications Policy, and Media and Foreign Policy. PhD in Information
Technology.

Application of a Multilevel Technology Acceptance Management Model for Effective Technology Deployment

More Related Content

What's hot (18)

Similar to Application of a Multilevel Technology Acceptance Management Model for Effective Technology Deployment (20)

More from AIRCC Publishing Corporation (20)

Recently uploaded (20)

Application of a Multilevel Technology Acceptance Management Model for Effective Technology Deployment