It details on a system of aquaculture in which the waste produced by farmed fish or other aquatic creatures supplies the nutrients for plants grown hydroponically, which in turn purify the water.
1. D A N I E L E . W E L L S
A U B U R N U N I V E R S I T Y
Introduction to Aquaponics
2. Definition
Aquaponics – Aquaculture + Hydroponics
Basic idea is:
Multiple uses of water
Recover as much value from inputs as possible
Minimize negative environmental impact
Sustainable system
3. Who can/should do aquaponics?
Backyard hobbyists
Community groups?
Commercial scale?
Fish producers who want to diversify
Usually shouldn’t go the other way
4. The AU approach
We are trying to design and operate a commercial-
scale system.
Primary process is tilapia production using biofloc
technology.
De-coupled system
Multiple vegetable species (other plants as well)
5. What are we growing in aquaponics?
What are you growing in an aquaponic system?
At least 3 things:
1. Aquatic animals (usually fish)
2. Plants (high value)
3. Bacteria
6. Fish
Various types of fish can be used, but we are typically
limited in our selection.
1. Need a warm water species (typically).
1. Rainbow trout (13-15 C; 55-60 F); Nile tilapia (21-29 C; 70-
85 F)
2. Needs to be able to survive well in RAS.
1. Confinement, high levels of nutrients in water, etc..
3. Needs to eat a high protein diet.
1. Protein = N
7. Nile Tilapia
Work nicely in most aquaponic systems
Tilapia are tough fish.
Tolerate wide range of pH
Tolerate high concentration of nitrates
Vigorous eaters
Eat primary feed and partially digested feed
Adaptive to many environments.
Value?
8. Plants
Need to grow high-value plants.
Species that are normally grown in hydroponics.
1. Lettuce
2. Cucumbers
3. Peppers
4. Tomatoes
With some exceptions possibly…
9. Bacteria
Two major types of bacteria are crucial to success in
aquaponics:
Nitrosomonas spp.
Nitrobacter spp.
Both types must be present to effectively transform
waste into fertilizer.
10. How does it work?
The science behind aquaponics relies on an
understanding of the nitrogen cycle.
In natural systems, nitrogen is cycled from one form
to another to another, and so on…
Aquaponics utilizes this natural cycle to produce
protein and vegetables in the same system.
11. The Basic Idea
1. Fish convert protein (organic N) into ammoniacal-
N excreted in feces, urine, and through gills.
2. Bacteria convert ammoniacal-N to nitrate-N.
3. Plants remove nitrate-N from water.
12. System Design Options
Continual recirculation (circular design)
Fish – plants – fish – plants
De-coupled system (linear design)
Fish – plants – plants – plants
13. System schematics
Primary process is fish production in any
aquaponic system.
Either the fish are being intensively produced for
sale, utilized as fertilizer factories, or both.
Re-tasking the fish waste leads to the secondary and
tertiary processes.
15. High-protein, soy-based feed
and water are the primary
inputs into the system.
Track the water movement
through the system.
Nutrients (N) move with
water through the system.
Multi-use water and
nutrients.
18. Nitrogen cycle
Nitrogen is present in multiple forms in our environment.
N2 gas in atmosphere (70%)
Organic N (amino acids, proteins, DNA, etc.)
Ammoniacal N – Ammonium (NH4
+) and ammonia (NH3)
Nitrites (NO2
-)
Nitrates (NO3
-)
20. Bacteria are our friends
Bacteria are the workforce behind aquaponics
Will not work at all without bacteria
We want to grow the right types and set up the right
conditions for them to be happy
Nitrosomonas spp.
Nitrobacter spp.
21. Biofilter
A biofilter is material that allows bacteria to colonize
and do the work we want them to do.
In this case, nitrification.
Many different types of biofilters are available.
Shredded PVC (surface area) – 3D printed media –
bead filters - flocculants within fish production
water
22. Biofilter
For biofilters to be most effective, we need constant
agitation of the water.
The biofilter can be within the water column of the
RAS or outside it.
23. Biofilter
Low-cost system that we use at AU: Bio-floc
technology (BFT)
Water column in RAS is the biofilter.
24. Biofloc Technology (BFT)
Bacteria flocculate together, when present in very
high concentrations, to form “bioflocs”
Bioflocs are suspended in the water column through
constant aeration (bubbling)
Bacteria in bioflocs carry out nitrification!
27. So, solids in the system are constantly agitated via
aeration.
Solids = solid waste, bioflocs, partially digested
waste, etc..
Tilapia will eat primary feed and bioflocs.
Increases FCR (Feed Conversion Ratio)!
28. What do we do with the solids?
We must remove the solids on a regular basis.
Can repurpose solids –
1. Organic soil amendment
2. Horticultural substrate amendment
3. Anaerobic digestion – biogas
4. Fermentation – lactic acid production
Liquid fraction = nitrates
30. A = primary clarifier with baffle
B = secondary clarifier without baffle
C = solids removal sump
Clarified
water is
pumped
from
clarifier B
using an
irrigation
pump
38. Nitrification
If we want to maximize our efficiency it is in our best
interest to maximize nitrification
Much debate in aquaponics world about this
At AU, we have taken the commercial food
production approach to the problem
Some other institutions have attempted primarily to
maintain balance in the system
39. Nitrification
Nitrosomonas spp.
Nitrobacter spp.
Most efficient (happiest?) at pH 7.5 – 8.5
Plants are happiest at 5.8 – 6.5
What pH do we shoot for?
Nitrification will drive pH down!
40. Finding the right pH in our system
At this point, AU aquaponics system runs at pH 6.2
– 6.8.
Plants are happy (at least pH-wise)
Avg. daily nitrate concentrations = 200 – 600 ppm
200 – 600 ppm NO3-N = 45 – 135 ppm N
42. We may get more nitrification at higher pH
Increase plant production!
Ultimately, we want to design a system in which all
of our nitrates and water are being utilized within
the system (i.e. minimal waste)
How do we increase pH?
43. Our water has low alkalinity.
Add lime to the water.
Hydrated lime – Ca(OH)2 (very caustic, use with
caution)
Currently, we add lime weekly.
We would need to add lime daily to maintain pH >7
44. Problems with high pH?
A major problem with high pH in fish production is
the higher presence of “un-ionized” ammonia
NH3
NH4 much less toxic to fish
[NH3] > 5 mg / L = dead fish
45. In theory: higher pH = more bacteria = more
nitrification = less TAN
What about other nutrients?
We supplement potassium (K), calcium (Ca), and
Iron (Fe)
Muriate of potash (K), hydrated lime (Ca), chelated
iron (Sprint 330)
47. AU Approach
Focus on commercialization of technology.
Increase nitrification
Decouple fish and plant production.
Spread nitrate-rich water to large population of
plants = $$$
Dutch Bucket Culture / Beit Alpha Cucumbers
49. AU Approach
Focus on commercialization of technology.
Increase nitrification
Decouple fish and plant production.
Spread nitrate-rich water to large population of
plants = $$$
Dutch Bucket Culture /
Beit Alpha Cucumbers
50. High-protein, soy-based feed
and water are the primary
inputs into the system.
Track the water movement
through the system.
Nutrients (N) move with
water through the system.
Multi-use water and
nutrients.
54. Why decouple?
Pesticides, even organic options, are often highly
toxic to fish.
Maximizing water use efficiency does not mean the
same thing as recirculating water over and over.
Diseases?
55. Is Aquaponics commercially viable?
The technology works. Proven in several, different
systems.
Can you make $?
Is it safe??
56. The Current Situation
Intensive aquaculture (RAS) is not profitable, in
many cases.
Low cost of imported fish
Expensive to process
“You make money on the plants”
So, why aquaponics?