ArchiOffice Getting Started Guide 2016

GETTING STARTED GUIDE:
ArchiOffice
ArchiOffice | Power your Office. EmpowerYourself.
(866) 945-1595 | www.bqe.com | info@bqe.com
ArchiOffice Getting
Started Guide 2016

ArchiOffice
CONTENTS
INTRODUCTION .....................................................................................................................................1
ARCHIOFFICE SETUP CHECKLIST.................................................................................................................................. 2
SYSTEM REQUIREMENTS .......................................................................................................................3
SERVER REQUIREMENTS............................................................................................................................................... 3
CLIENT REQUIREMENTS ............................................................................................................................................... 4
INSTALLATION .......................................................................................................................................5
INSTALLATION PREPARATION ....................................................................................................................................... 7
INSTALLATION ............................................................................................................................................................ 9
ADVANCED INSTALLATION ........................................................................................................................................ 11
START-UP..............................................................................................................................................11
START UP ARCHIOFFICE............................................................................................................................................ 11
ARCHIOFFICE COMPANY FILE ................................................................................................................................... 12
LOG-IN..................................................................................................................................................................... 17
PRODUCT ACTIVATION.............................................................................................................................................. 18
NAVIGATION ............................................................................................................................................................ 19
ARCHIOFFICE BASICS ..........................................................................................................................20
ARCHIOFFICE SETUP................................................................................................................................................. 21
TUTORIAL .............................................................................................................................................24
CONTACTS............................................................................................................................................................... 24
PROJECTS ................................................................................................................................................................ 26
TIME AND EXPENSE................................................................................................................................................... 28
BILLING .................................................................................................................................................................... 30
REPORTS .................................................................................................................................................................. 31
PROJECT MANAGEMENT ........................................................................................................................................... 32

ArchiOffice
(866) 945-1595 | www.bqe.com | info@bqe.com 1
INTRODUCTION
Welcome to ArchiOffice® from BQE Software!
ArchiOffice is a project management solution for architects. It is networkable, multi-user, device-agnostic
software. It was created by architects, for architects, and has continued to evolve to meet the needs of a
growing customer base worldwide. ArchiOffice takes all the disparate pieces of information in your office
and organizes them in a most remarkable way by offering solutions such as contact management, document
management, task and project management, time and expense tracking, billing and reporting. This solution
is simple, affordable, secure, scalable, and very fast.
ArchiOffice comes in three different editions. Please see the Edition Comparison Chart for details.
Being device-agnostic, your employees can run ArchiOffice (as client) from anywhere using a PC, Mac,
Linux, iOS or Android platform. Local or in-house users can access it on their desktops and laptops via a
local or wide area network (LAN/WAN) when properly configured. You can also make ArchiOffice instantly
accessible to remote users on their laptops, smartphones, and tablets via the Internet while retaining all the
features and functionality that your business depends on.

ArchiOffice
The goal of this ArchiOffice Getting Started Guide is to help you install and set up the software. It explains
the concepts and procedures involved in setting up of ArchiOffice, focusing on its installation and setup.
Thus, this Guide enables you to educate yourself quickly on how to run and start ArchiOffice effectively and
efficiently.
The ArchiOffice Getting Started Guide is not a complete training solution. It is a guided tour designed
to set up and familiarize you with ArchiOffice. After completing the guide, we recommend that you explore
the ArchiOffice Help. In particular, check out the How Do I help items. Based on your preferred learning
style and available time, you can choose self-learning or guided learning. Guided learning provides an
expert trainer who helps you get up and running with ArchiOffice as quickly as possible. Check out
www.bqe.com/Services for more information.
ArchiOffice Setup Checklist
Task Resources and References
Decide about the ArchiOffice edition/flavor
you want to install
Edition Comparison Chart
Decide whether to do the installation yourself
or have a BQE Consultant do it for you. Contact
your Account Rep for that; else proceed
ArchiOffice Installation Preparation
Check our system requirements Server Requirements
Client Requirements
Mac Only Users: Install Windows virtual OS Set Up Mac for ArchiOffice 2016
Install Internet Information Services on your
server
How Do I Install IIS on Web Server?
How Do I Add Components to IIS?
Install Microsoft SQL Server on your server or
have a BQE Consultant do it for you. Contact
your Account Rep for that
Read Install SQL Server 2008
Watch How to Install SQL Server 2008
Download the ArchiOffice setup ArchiOffice Support Downloads
Log in as an administrator and install
ArchiOffice
Read Installation
Pre-InstallationInstallationPreparation

ArchiOffice
Existing Users: Install ArchiOffice 2016 and
then convert your existing data using
ArchiOffice 2016 Convertor
Or contact your Account Rep to have a BQE
Consultant do it for you
Upgrade Data to ArchiOffice 2016
Open ArchiOffice on a server or client machine Start Up ArchiOffice
Create or open your company file Create a New Company File
Open an Existing Company File
Open a Sample Company
Log into your ArchiOffice company Login
Activate and license ArchiOffice Product Activation
Licensing
Set up ArchiOffice company file and
preferences
Setup
Add or import company data and start using
ArchiOffice
Tutorial
ArchiOffice Help
ArchiOffice-QuickBooks Integration
SYSTEM REQUIREMENTS
For successful installation of ArchiOffice software, be sure your computer system meets or exceeds the
minimum requirements. System requirements are different for server and client machines, and depend on
whether you are using a Windows or Mac operating system.
Server Requirements
Hardware Requirements
• Any Intel x86-compatible microprocessor (Intel i3 or later recommended)
Start-UpDeploymentInstallation

ArchiOffice
• 2 GB RAM or more (4 GB recommended)
• At least 20 GB of free hard disk space required
Software Requirements
• Windows Server 2012, Small Business Server 2011 or 2008, Windows Server 2008, Windows 10,
Windows 8 Pro, Windows 7 (Professional, Enterprise or Ultimate) ,
Windows Server 2012 Essentials/R2 Essentials editions do not support SQL Server and hence
ArchiOffice 2016 cannot run on those operating systems.
ArchiOffice 2016 is a full 64-bit application and must be hosted from a server running a 64-bit
version of Windows.
• Microsoft .NET Framework 4.5 (installed automatically by our installer)
• Internet Information Server (IIS) 7.0 or later (IIS is part of Windows; needs to be installed and
configured properly by a Windows administrator)SQL Server 2014/2012/2008 Standard or Express
Edition with Management Tools
• Internet connection
• For Mac only users: Virtualization software like VMWare and Microsoft Windows OS (See Set up Mac
for ArchiOffice 2016 for more.)
It is highly recommended that firms with more than 5 users should use Windows Server 2008/2008
R2/2012 instead of Windows 7.
Client Requirements
Hardware Requirements
• Any Intel x86-compatible microprocessor (Intel i3 or later recommended)
• 2 GB RAM or more (4 GB recommended)
• At least 5 GB of free disk space
• For Mac users: An Intel processor, 4 GB of free disk space, 2 GB or better RAM
Software Requirements
• Windows 10/Windows 8/Windows 7 or Mac OS 10.7 or later

ArchiOffice
• Microsoft Edge 20.10240 or later, Microsoft Internet Explorer 9.0/10.0/11.0, Chrome 7.0 to 34.0,
Firefox 10.0 to 27.0, Opera 11.0, Safari 7.0 or later
Google Chrome is the recommended browser for ArchiOffice since it is easier to configure in terms of
turning off popup blocker and clearing the browser cache. However, ArchiOffice works with other
browsers too as long as the pop-up blocker settings are set correctly.
• Latest version of Java 8
ArchiOffice 2016 uses Java to open project documents and for data synchronization with Microsoft
Outlook and QuickBooks.
Be sure to install the latest Windows service packs and critical updates. Check the Microsoft website for
the latest updates to Windows, .Net Framework, and Data Access Components. Some versions of Windows
include an Automatic Update option.
INSTALLATION
ArchiOffice 2016 is a server-based program requiring one machine to function as a ‘web server’ and ‘data
server’ that can host both the ArchiOffice web program and web data. (ArchiOffice can be hosted on two
servers also—one dedicated for the web program and another dedicated for data.) The procedure is safe
and can be set up on a secured server. Users can access ArchiOffice via the Internet or Intranet. Optionally,
in-house users can access it via a local or wide area network (LAN/WAN) when properly configured. If you
only have a single license and single machine for your firm, you can use it both as a server and as client
machine.
ArchiOffice has two main components – a public web application (site) and an admin web application (site).
Both of them are installed by the ArchiOffice setup program on your IIS (Internet Information Server), that is,
web server running compatible server software.
The installation process also requires that you set up your database, as shown in the flowchart below:

ArchiOffice

ArchiOffice
Installation Preparation
Before installing ArchiOffice, you must ensure the following:
1. Please read the End User License Agreement (EULA).
2. Make sure your server (host) and client computers meet the system requirements (see System
Requirements for details). The server machine must have a Windows operating system while the
client machine can have Windows or Mac OS.
If you only have a Mac system, you can install ArchiOffice on it using a Windows virtual environment.
Check out the Set up Mac for ArchiOffice 2016 whitepaper for details.
3. In addition, make sure you have configured Microsoft .NET Framework correctly. Using Control
Panel > Programs, select the ‘Turn Windows features on or off’ link.
Please make sure to turn on all the relevant components on your web server as shown below.

ArchiOffice
4. Because ArchiOffice 2016 is a web-based program, it must run on a web server. Ensure you have
installed Internet Information Server (IIS) 7.0 or later on your server. Typically, IIS comes installed
with most Windows editions. If you find that IIS is not installed, download it using one of the
following links:
Install IIS 7.5 on Windows 7 Professional/Enterprise/Ultimate
Install IIS on Windows 7 (video)
Install IIS 7.0 on Windows Server 2008
Install IIS 7.5 on Windows Server 2008 R2
When using Windows Server 2008 or Windows 7 with Internet Information Server 7.0, make sure to
turn on all the relevant IIS components on your web server as shown below. You can access it via
Control Panel > Programs > Turn Windows features on or off.
5. ArchiOffice 2016 stores your company data in an SQL database. You must have installed Microsoft
SQL Server on your system (server). If not, then you can download and install a free version of it
(Express Edition) from:
Microsoft Download Center
How to Install SQL Server 2008

ArchiOffice
How to Install SQL Server 2008 R2 Express (video)
You should run the installer as an administrator (Run as Administrator via shortcut menu). This video
instructs you to choose Windows Authentication Mode; when prompted to select an Authentication Mode,
choose Mixed Mode instead.
Make sure to note the location, SQL Server Name, Login ID and Password of the SQL Server you are
installing. In addition, we recommend restarting your system after installing SQL Server.
6. At the time of ArchiOffice installation:
o log in to your web server as an administrator
o we recommend disabling anti-virus protection
7. If you have purchased ArchiOffice, you should have received a link via email from where you can
download the installation file (setup). Otherwise, you can download the ArchiOffice installer from
our Support Download web page and save it on the desktop of the server/host computer:
The installer or setup is a zipped file. You will need a Zip archiving or extraction program. Windows
7/8/2008 has a built-in extraction tool in Windows Explorer.
Installation
Follow the steps below to install ArchiOffice on a server machine that will be hosting the ArchiOffice data
(this applies to both multi and single users).
1. After downloading the ArchiOffice 2016 setup file, unzip the contents to your desktop.
2. Right-click on the setup icon on your desktop and select ‘Run as Administrator’.
3. When the ArchiOffice 2016 InstallShield Wizard appears, read the information and follow the on-
screen instructions. Click Next.
4. Read the License Agreement and select the ‘I accept…’ option to proceed. Click Next.
5. You are prompted to install Microsoft SQL Server on this computer or a server in your network (see
Installation Preparation above). After you do so, return to this setup. If you already have an SQL
2008 or later version installed, then you can choose to skip this step.
6. Provide Customer Information by entering the User Name and Organization. Click Next.

ArchiOffice
7. Accept the default Destination Folder or click Change to specify a different location. Click Next.
8. After the installation begins, a progress bar displays. When the Finished page appears, click Finish.
9. You are prompted to reboot your system. Click Yes as this reboot is required for the proper
installation of the software.
Your Internet or antivirus security software might prompt you to allow program access. Please ALLOW
(or Unblock) access whenever prompted. If you don’t, ArchiOffice will not function properly.
10. After reboot, ArchiOffice will start in your default browser; if not, click the desktop icon to start it
(the program will automatically install the Microsoft ACE redistributable and Crystal Reports
engine). See Start up ArchiOffice below.
If you want to sync with QuickBooks, Microsoft Outlook/Entourage, Apple Mail (AppleMail), Apple
Calendar (iCal), or Apple Contacts (Address Book), you have to download and install plug-ins. The
ArchiOffice program will point you to the download link when you start any of these features for the first
time. However, this requires Administrative privileges and Java installed on your computer.
Existing Users: If you are an existing ArchiOffice user, you must first install ArchiOffice 2016 (see above) and
then convert your existing data to the new version using the ArchiOffice 2016 Convertor (installed

ArchiOffice
automatically with the setup). The conversion must be handled by the administrator having full access
permissions. Please read the Upgrade Data to ArchiOffice 2016 whitepaper for conversion details.
Advanced Installation
By default, the setup process for ArchiOffice creates the AO2016 program under Default Web Site and
assigns Anonymous Authentication to it. It also creates the Admin application under AO2016 and assigns
Windows Authentication to it. You can choose to configure these settings manually in the Internet
Information Services (IIS). See the IIS Knowledge Base article for details.
If you reside outside the United States, you must change the IIS local region setting for ArchiOffice to
ensure it processes your data correctly. See the article in the BQE Knowledge Base on how to set
ArchiOffice cultural settings.
If you are experiencing problems while installing ArchiOffice, please check our Knowledge Base
Articles. Otherwise, contact us at 310-602-4030 or support@ArchiOffice.com.
START-UP
In order to start ArchiOffice, please follow the steps below. At this point ArchiOffice should already be
installed on your server.
Start Up ArchiOffice
If you are opening ArchiOffice from a computer that is also the ArchiOffice server, you can click the
ArchiOffice desktop icon. If you are on any other computer, open your browser and type the URL (Uniform
Resource Locator) of your ArchiOffice web server, e.g.,
http://www.mydomain.com/AO2016/default.aspx
where ‘mydomain.com’ is your website domain name. Alternatively, you can use the IP address (local host or
computer name) of the server, for example
http://192.168.1.45/AO2016/default.aspx or
http://computername/AO2016/default.aspx or
http://localhost/AO2016/default.aspx or
http://127.0.0.1/AO2016/default.aspx

ArchiOffice
If you are using Internet Explorer with Google toolbar, you need to turn off the pop-up blocker for
Internet Explorer (Tools > Internet Options > Privacy) as well as Google toolbar (Settings next to the Search
button).
When you start ArchiOffice for the first
time, you need to configure it on the server
machine to point to the data file. To do so,
you are prompted to log into your system
(Windows server) using the administrator’s
User Name and Password. After you log in
as an administrator, you are prompted with
the company file dialog box.
ArchiOffice Company File
When ArchiOffice opens for the first time, it prompts you with the ‘What would you like to do?’ dialog box.
You can:
• Create a new company file
• Open an existing company file
• Open a sample company file
You can open (existing user) or create (new user) a company database from or on the same drive as where
your ArchiOffice program or IIS is installed.
Depending on which edition of ArchiOffice you purchase, you can use either Microsoft SQL Server Express
Edition or Microsoft SQL Server Standard Edition to house your database. ArchiOffice Basic and Pro editions
work only on SQL Server Express Edition while ArchiOffice Enterprise works on either SQL Server Express or
Standard Edition. Please see the Edition Comparison Chart for details.
You will find many tools and resources online to help you check and test the ODBC connectivity to your
SQL Server (http://support.microsoft.com/kb/827422)

ArchiOffice
New Company File
To create a new company file:
1. When prompted, select ‘Create a New Company File’ option. Otherwise, do so by clicking Admin
Options on the Login page. Make sure your web server is able to connect to your SQL Express or
SQL Server database application.
2. Enter your Company Name and ArchiOffice Data File Name (generally same as your Company
Name).

ArchiOffice
You can purchase your licenses from BQE Software. To obtain your license key, contact BQE at 888-245-
5669 or email Sales@bqe.com.
If you have purchased an ArchiOffice license, you must enter the licensed company name in this field as it
appears on the licensing and registration instructions provided upon your purchase. The exact spelling,
spacing and punctuation are required, although it is not case sensitive. If the company name is changed
after the database is licensed, it will result in the cancelation of the license. Please consult ArchiOffice
Technical Support, support@bqe.com, if you must change the company name.
3. Now enter the following:
o SQL Server Name: (IP address of the server or Instance Name)
o SQL Server User ID (System Administrator)
o SQL Server Password (System Administrator)
If you don’t remember the SQL Server details, log in to your SQL Server (Start menu > SQL Server
Management Studio) and then see the details (except for the password).
We recommend using the SQL Server Authentication Mode. Windows Authentication requires you to
have an account set up on IIS with proper permissions. If SQL Server option does not work, you can use the
Windows Authentication option but have your IT/System Administrator handle it for you.
4. Click Create. Please wait while the database is created.

ArchiOffice
5. Next, you have to provide the path in the Preferences screen where your project templates and
documents will be stored.
By default, the ArchiOffice installer sets the path as: X: ArchiOfficeData2016 where X: is the physical
drive on which IIS is installed. However, you must enter the specific path or location of these shared
folders in the UNC format (ServerIPAddresssharedfolder or 192.168.4.5AO2016_Docs).
6. Click Save.
Typically, a NAS device cannot be used to store your project documents because its underlying
configuration and operating system does not allow setting up access or security preferences that are
compatible with ArchiOffice. Please contact BQE Technical Support for details.
See the KB article on How do I set the UNC path for ArchiOffice documents. If your documents are on a
Mac file server, check the Knowledge Base article on how to handle that.
You will now be prompted to log in.
Existing Company File
If you are upgrading from a previous version of ArchiOffice and have an existing data file, you are able to
open it here. After installation, you must first run the ArchiOffice 2016 Convertor and then open your
existing company file from here. During the data conversion process, your previous settings are migrated to
the current version. Please read the Upgrade Data to ArchiOffice 2016 whitepaper for the conversion
details.
Your ArchiOffice data is stored in an SQL database using either Microsoft SQL Server or SQL Express.
We highly recommend you to back up your database regularly and store multiple backup files on
appropriate storage devices. You can back up the database using either Microsoft SQL Server Management
Studio or a third-party program.
Sample Company File
If you want to check out the sample data file before creating or setting up your own in ArchiOffice, follow
these steps:
1. When prompted with the ‘What would you like to do?’ dialog box, select ‘Open a Sample
Company’. Otherwise, do so by clicking the Admin Options dialog box on the Login page.

ArchiOffice
2. Enter the following:
o Server Name: IP address of the server
o SQL Server User ID (System Administrator)
o SQL Server Password (System Administrator)
3. Click Open. Please wait while the database is being loaded.

ArchiOffice
4. Next, you can provide the path in the Preferences screen where your project templates and
documents are or will be stored.
By default, the ArchiOffice installer sets the path as: X: ArchiOfficeData2016 where X: is the
physical drive on which IIS is installed. For testing purposes, you can keep it as is but if you plan to
use the documents and templates for real, enter the specific path or location of these shared folders
in the UNC format (ServerIPAddresssharedfolder or 192.168.4.5AO2016_Docs). Click Save.
See the KB article on How Do I Set the UNC Path for ArchiOffice Documents. If your documents
are on a Mac file server, check the Knowledge Base article on how to handle that.
You can also specify the path of your old invoice folder in the Legacy Invoices field. This is used to
view a converted invoice in the original PDF layout instead of rendering it in the Crystal Reports
window. Click Save.
5. You are prompted to log in using any of the users in the sample database.
Log-in
ArchiOffice requires you to log into the program to access its functions and features. Your administrator will
provide you with a User Name and Password. By default, ArchiOffice creates an Admin user account.
If you have upgraded from an older version, all existing users will have the same user names and passwords.
However, converted databases will have only a single administrator available for the first login. So the
administrator knowing the old password must log in and activate the other users from the Preferences
screen. After this is done, all user names are listed in the login drop-down unless you want a secured login.
You can turn this option on or off from the Preferences > System > Company screen.

ArchiOffice
If you have created a new company, to start with, use:
User Name: Admin
Password: Admin
If you are using a sample company (say Fountainhead Architects), use:
User Name: Howard Roark
Password: Roark
If relevant, you will be able to check the update notifications, evaluation copy message, and links to
purchase and license the product on the login page. After logging in, the ArchiOffice Dashboard (home
page) displays.
When there is no activity in ArchiOffice, you are logged out in 20 minutes. See the BQE Knowledge
Base article on how to increase the default time-out period.
Product Activation
You can evaluate ArchiOffice for 15 days with full functionality (no need for an evaluation key). After the
evaluation period is over, you must purchase a full software license to continue.
When logging in as an administrator, you will be able to purchase the license key for ArchiOffice or enter it
(if already purchased) using the links provided on the login page. You can also contact your ArchiOffice
Account Rep at (310) 602-4020. After purchasing your product license, use the following instructions.
Licensing
1. After purchasing ArchiOffice,
open it. During and after your
evaluation period, you will see the
links to purchase the product or
enter license key (if already
purchased) on the login page.
2. Otherwise, after logging in, select
Preferences in the drop-down
menu at the top right corner of
the screen and click System >
Company to do so.
3. Enter or verify your Company
Name. It should be exactly the
same (spelling, capitalization,
punctuation) as the licensing

ArchiOffice
email you received from BQE Software.
4. Enter the License Key or cut-paste it from the email.
5. Click Validate to verify the license key and number of authorized users.
6. When you have finished, click Save and then close the screen.
ArchiOffice is now ready to use. Work with the ArchiOffice administrator to ensure data and company
procedures are ready for the rest of the company.
Navigation
After logging in to ArchiOffice, you can access various functions and features of the program using the
following navigation options:
Navigation Bar
ArchiOffice displays a navigation bar at the top with color-coded tabs that represent a major function or
module of the program. Clicking each tab on the navigation bar displays the respective screens. E.g.,
Clicking Time/Expense on the navigation bar displays a group of tabbed screens like Time, Expense, etc.
You can click on each tab to view or enter data in each screen.
You can also access some options from the drop-down menu at the top right corner of the screen such as
Accounting, Sync, Preferences, Login, etc. These options are based on the user’s access privileges.

ArchiOffice
Dashboard
The home page of ArchiOffice displays a dashboard with highly useful and customized information, charts,
and links. You can access product related News; ArchiOffice Help; lists such as Time/Expense, Contacts,
Projects, etc.; and important charts such as profitability, A/R, realization, etc. All this information is
customized based on your user profile and privileges. You can choose to expand or collapse the panels by
clicking on them and apply filters to the charts.
ARCHIOFFICE BASICS
This section focuses on the initial setup of ArchiOffice including the default settings and tutorial.

ArchiOffice
ArchiOffice Setup
At least one person (administrator) should set up the ArchiOffice Company. The administrator must review
and update the Preferences (explained below). This establishes the default settings for the program.
To access the Preferences screen, select Preferences from the drop-down menu at the top-right corner of
the program. You can set up your company defaults, users and other settings from this screen.
It is critical to set up preferences prior to entering any additional information in ArchiOffice. If you have
converted data from an older version of ArchiOffice, much of the information will be imported for you;
however, you should still review and verify its accuracy.
Preferences-System: Enter required information or specify settings for your company, report and invoice
logos, system defaults, number formats, printing standards, etc.
Preferences-Workgroups: Establish workgroups and their access permissions (security settings and
privileges) for various screens and reports. This saves time by setting permissions on a group basis, rather
than for each employee.
Preferences-Users: Enter ArchiOffice user profiles and other details such as default rates, addresses, HR
items, time and expense options, synchronization privileges, security settings, and so on. You can also
override the user’s workgroup security here. You must enter their cost rates (to track the project’s
profitability) and charge rates (used when employee records time entries against a project) prior to setting
up a project. The DPE and DSE rates are required to establish the value of the time entries only if a project
uses the invoice method of Multiple of DPE/DSE.

ArchiOffice
Preferences-Contact: Set the contact defaults and name formats for your ArchiOffice contacts.
Preferences-Project: Set the defaults for the projects so that when creating new projects in ArchiOffice, users
will have consistent numbering, phase and job codes as well as other project management information. You
can set the defaults for roles, submittals, milestones, teams, associated tasks, etc. Properly setting up this
information will ensure that all new projects in ArchiOffice will conform to your company policy and
standards. All this must be entered in its entirety prior to setting up a project.
Preferences-Documents: ArchiOffice works with most conventional document types and comes with more
than 70 templates, which can be customized to suit your needs. You should set the default document
management structure to be used in ArchiOffice (Pro and Enterprise editions only). On the Preferences >
Documents > Path screen, you can specify the default location of the project templates and documents. If
you do not have the path specified properly, you will not be able to create project documents. You can have
the program and file server as a single machine. However, we recommend that the file server and
application server should be on separate machines.

ArchiOffice
The following scenarios are possible:
• Windows application server and Mac file server on separate machines
• Windows application server and Windows file server on same machine
• Windows application server and Windows file server on separate machines
By default, the ArchiOffice installer sets the path as: X: ArchiOfficeData2016 where X: is the physical drive
on which IIS is installed. This folder is used to store sample templates. However, you must enter the specific
path or location of these documents and templates in the UNC format (ServerIPAddresssharedfolder or
192.168.4.5AO2016_Docs). The documents should be stored in a shared folder on the network or file
server so that all users can access them from ArchiOffice. This is possible when ‘Read/Write’ permissions are
given to Everyone, IUSR and Network Service for the shared folder. In addition, the share permissions itself
must be set to allow ‘Everyone’ Full Control.
You can also specify the path of your old invoice folder in the Legacy Invoices field. This is used to view a
converted invoice in the original PDF layout instead of rendering it in the Crystal Reports window.
Local users (connected via LAN) can open and save the documents in the native program directly from and
to the ArchiOffice server. However, in case of remote users (connected via Internet), there are two scenarios:
If you are connected to the file server via VPN, the documents can be downloaded to your computer.
If you don’t have a direct access to the file server, ArchiOffice downloads the documents to your computer
where they can be edited and saved. These documents will have to be moved or replaced to the proper
server location manually when you have access to the file server.

ArchiOffice
See the KB article on How Do I Set the UNC Path for ArchiOffice Documents. If your documents are on a
Mac file server, check the Knowledge Base article on how to handle that.
Preferences-Billing: The billing setup might require collaboration with your accountant or bookkeeper. Here,
you set the defaults for invoice numbering and templates, payment terms, expense markups, account
codes, tax models, and billing labels. You can customize the expense types, if needed. This information
must be entered in its entirety prior to setting up a project but can be overridden at the project level.
Preferences-Web Access: Set your default mapping website and address. The Contacts portal provides links
directly from the contact information using the maps you choose here (say Google Maps). This information
is used for mapping of contact addresses or driving directions.
TUTORIAL
This tutorial covers the basic procedures involved in project setup, time tracking, billing, payment, project
management and reporting. For details, please refer to the ArchiOffice Help file.
Contacts
The Contacts screen allows you to create and maintain a profile of your contacts including employees,
clients, contractors, consultants, and anyone related to your projects. Contact information can be entered
manually or, if your contacts are maintained in another program, you can sync that data with Microsoft
Outlook, Entourage, or Apple Contacts.
To enter contact information:
1. Select the Contacts tab on the navigation bar.
2. The grid displays a list view of your contacts, if any. Select a contact to edit details or click Action >
New on the button panel to add a new contact.

ArchiOffice
3. Enter the required information about the contact on the Work tab such as Name, Company,
Address, Phone, etc. When a new contact is created, default settings specified in the Preferences
are automatically applied.

ArchiOffice
You can add more address tabs to this screen by clicking + tab on the right. Additional tabs provide the
ability to enter multiple addresses and phone numbers, that is, home, billing, job site, assistant, etc. This
helps keep the contact details organized and easily accessible.
4. Before proceeding to create a project, you must enter the client’s contact details (address and
phone) first. All projects are built based on the client’s contact information.
Projects
The Projects screen allows you to create and maintain a profile of your projects or jobs. When a new billable
or RFP project is created, default settings specified in the Preferences are automatically applied. If you
create a new project from a project template, ArchiOffice ignores the Preferences and uses the template's
settings. Internal projects adopt no settings from the Preferences.
1. From the Contacts screen, select the client’s contact record. In the detail view, select the Projects
tab below the contact details and select Action > New. You can also select Projects on the
navigation bar and select Action > New in the list view.
2. It prompts you to enter the required information such as type of project—Billable (contract work that
will be billable), RFP (pre-contract) or Internal (internal office work that is non-billable or project
related), client, project name and number.
On entering this information, you automatically move from the Contacts screen to the Projects screen.
3. On the Details tab, you can enter the project’s basic details such as employees working on this
project (teams and rates), phases, and job codes included in the scope of this project and as
stipulated in your contract. In addition, phases and job codes can have sub-classifications to
accommodate consultant’s fees or any other sub-categories related to budgeted phases and job
codes. Click Save.

ArchiOffice
4. Now, click on its Billing tab and select Options from the drop-down list on the left to set the
project’s Invoice Method. This is important prior to entering the project’s budget.

ArchiOffice
5. Next, on the same Billing tab, select Budget from the drop-down list where the phases (sub-phases),
job codes (sub-job codes) have already been set. Enter the fees and hours budgeted for each
phase. This will coincide with information stipulated in your contract.
It is imperative that budgets are set for ALL projects, whether hourly, stipulated sum, percent of
construction or unit cost. Without a budget, you will not be able to effectively report on or evaluate the
efficiency of your projects. Though hourly projects do not necessarily need a budget, it is important for you
to estimate your fees and time that you will be spending on each phase of the project so you can manage
each project accurately to ensure profitability.
After project setup, you and your team members can begin tracking their time on it.
Time and Expense
The Time/Expense screen is used for entering time and expense entries in ArchiOffice. The screen also
displays the existing time and expenses in the system.
1. Select the Time/Expense tab on the navigation bar.
2. On the Time tab, select the desired Employee from the drop-down list (your login name is pre-
selected by default).
3. ArchiOffice auto sets the time card to the current date (highlighted in yellow). If you want to enter
time for another day, just click that day on the grid and then enter time in Hours along with other
required information such as Project, Phase, Job Code, and Task/Description in the area below the
grid.

ArchiOffice
4. Specify whether the time entry is chargeable or not by checking or un-checking the Charge option.
By default, all time is chargeable.
5. Click to add and save the time entry.
6. Similarly, on the Expense tab, pick a date on the grid and then enter the required information such
as Project, Expense Type, Description, etc.
7. Specify whether the expense entry is non-reimbursable (NR) by the client or reimbursable (ER) to
the employee by checking the relevant option.
8. Enter the Quantity and Cost of the expense.
9. Click to add and save the expense entry.
If you prefer, both time and expenses can be entered on the Detail tab. Here, you have the option of
using a timer to track your time, place an entry on hold, enter notes, and so on.

ArchiOffice
Billing
ArchiOffice provides several options for generating invoices and applying payments. For a selected project,
you can generate invoices using the Projects > Billing > Invoices and Projects > Billing > Options screen.
The Options screen also allows you to set the billing defaults and options used for generating an invoice for
a project.
Alternatively, you can batch bill projects directly from the Billing screen. You can also view outstanding, draft
and historical invoices from here, and apply payments to outstanding invoices.
Payments can be recorded for the individual projects using the Projects screen. If you prefer to enter the
payment in a batch mode, you can do so from the Billing screen. Please see the ArchiOffice Help for more
information.

ArchiOffice
Reports
The Reports screen allows you to save and run standard and custom reports in a detailed or summarized
layout. You can also view your reports in different formats, such as PDF, RTF, or Excel. We recommend that
you check each category and run the reports, and see how each would best represent your data. After you
have set the report filters and criteria properly, memorize the report for future use to save time and effort.
1. Select the Reports tab from the navigation bar.
2. Then choose the desired report from the Standard Reports list on the left.
3. Specify the Display Details for the selected report, such as Type, Sort By, Output Format, etc.
4. After building the report settings, click Run Report to view it.

ArchiOffice
5. After applying filters on the report, click Memorize to save it as a custom report, if desired.
Project Management
ArchiOffice offers many ways to measure the efficiency of your projects. The following features can provide
useful information to review your projects and track their progress.
Projects Summary
Projects–Billing–Summary screen: This view allows you to measure the efficiency of a project by comparing
its budgeted, actual and invoiced amounts. This information is updated in real time and represents the
status of your project.

ArchiOffice
Project Profitability
Projects–Billing–Performance screen: This view displays the most pertinent information relating to your
project’s profitability. Here you will see the Total Cost to Date, Total Payment Received, etc. which then
reflects your actual profitability. In addition, this view provides a breakdown of the budgeted time on a
project compared to the actual hours spent, as well as the cost for each project phase.
Congratulations! You have now successfully installed ArchiOffice and understood its basic functionality. To
learn more about this program, check the ArchiOffice Help or visit www.ArchiOffice.com/ProductOverview.
For more information, visit us at www.ArchiOffice.com.If you have any trouble in using ArchiOffice, please
contact ArchiOffice Support at 310-602-4030 or support@ArchiOffice.com. For more technical issues, check
our ArchiOffice Knowledge Base. For other questions, please call us at (888) 245-5669 (US and Canada) or
(310) 602-4020; or email sales@ArchiOffice.com.

World Headquarters
For more information, visit
www.bqe.com or call
(855) 687-1028.
North & South America
3825 Del Amo Boulevard, Torrance, CA 90503
United States of America
Tel: (855) 687-1028 (toll-free)
+1 (310) 602-4010
www.bqe.com
www.twitter.com/ArchiOffice
www.facebook.com/ArchiOffice
Email: sales@bqe.com
support@bqe.com
©2010-2016 BQE Software Inc. All rights
reserved. BQE, BQE logo and ArchiOffice
logo are registered trademarks and/or
registered service marks of BQE Software
Inc. in the United States and other countries.
Other parties’ trademarks or service marks
are the property of their respective owners.
Regional Offices
Australia, New Zealand & Asia
Level 40 North Point Towers, 100 Miller Street, North Sydney, NSW 2060
Australia
Tel: 1300 245 566 (toll-free)
+61 (02) 9657 1355
Email: aus-sales@bqe.com
aus-support@bqe.com
Europe, Middle East & Africa
Crosshaven Co. Cork
Ireland
Tel: +44 2034119852
Email: uk-sales@bqe.com
uk-support@bqe.com
ArchiOffice | Power Your Office. Empower Yourself.

ArchiOffice Getting Started Guide 2016

More Related Content

What's hot (17)

Similar to ArchiOffice Getting Started Guide 2016 (20)

Recently uploaded (20)

ArchiOffice Getting Started Guide 2016