![2-30 HYSYS Fluid Package Property View
2-30
MRij = the mixing rule
To calculate the values of bi and ac, the cubic equation,
Equation (2.14), is solved to find a value for .
The value of ai in Equation (2.11) requires you to use the
term.
in turn is made up of the term.The parameter is a
polynomial equation containing five parameters: .
The parameter is also represented by a polynomial equation
consisting of 4 parameters (A, B, C and D).
The Parameters tab for the GCEOS consists of three group
boxes:
• GCEOS Pure Component Parameters
• GCEOS Parameters
• Initialize EOS
(2.12)
(2.13)
(2.14)
(2.15)
(2.16)
(2.17)
ac
3 u w
–
( )ξ
2
+
3 u 1
–
( )ξ
+
---------------------------------
- uξ
+
RTcVc
=
bi ξ Vc
=
u w u
+
( ) w
–
[ ]ξ
3
3 w u
+
( )ξ
2
3ξ 1
–
+ + 0
=
ξ
α
α T
( ) 1 κ 1 TR
0.5
–
( )
+
[ ]
2
=
α κ κ
κ0 κ1 κ2 κ3 κ4 κ5
,
,
,
,
,
κ0
κ κ0 κ1 κ2 κ3TR
–
( ) 1 TR
κ4
–
( )
+
[ ] 1 TR
0.5
+
( ) 0.7 TR
–
( ) T
κ5
×
×
+
=
κ0 A Bω Cω
2
Dω
3
+ + +
=](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-75-320.jpg)
![2-68 HYSYS Fluid Package Property View
2-68
To expand the branch, click the Plus icon in front of the
Options label in the Tabular Package group. This displays the All
Properties, Physical, and Thermodynamics pages. Each one
of these pages consists of a five column matrix table.
Property Type
The All Properties page consists of seventeen properties which
include both the Physical and Thermodynamic properties. These
properties have then been subdivided into two groups and
displayed again on either the Physical or Thermodynamics
page. These properties are listed in the table below, along with
the subgroup that they belong to:
• K-value (V/L1) [Thermodynamic]
• K-value (V/L2) [Thermodynamic]
• K-value (L1/L2) [Thermodynamic]
• Enthalpy(L) [Thermodynamic]
• Enthalpy(V) [Thermodynamic]
• Latent Heat [Thermodynamic]
• Heat Capacity(L) [Thermodynamic]
• Heat Capacity(V) [Thermodynamic]
• Heat of Mixing [Thermodynamic]
• Viscosity (L) [Physical]
• Viscosity (V) [Physical]
• Thermal Cond (L) [Physical]
• Thermal Cond (V) [Physical]
• Surface Tension [Physical]
• Density (L) [Physical]
• Entropy(L) [Thermodynamic]
• Entropy(V) [Thermodynamic]
Use HYSYS/Use PPDS
The checkboxes in the Use HYSYS and Use PPDS columns allow
you to select between the Hyprotech and the PPDS libraries.
Depending on the property type selected, the PPDS library may
not be available. When the PPDS library is available, the
checkbox changes from light grey to white.](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-113-320.jpg)
![4-24 Characterizing Assays
4-24
Curve Partition for Bulk Property Fitting
To allow piece-wise fitting for a bulk property, a property curve
is divided into three sections: head, main, and tail. The ending
% of the head section and beginning % of the tail section can be
specified. Each section can have an independent adjusting
weight factor as shown in the figure below.
For piecewise bulk property fitting there are two concerns to be
addressed. First, since each section can have an independent
adjusting weight factor, there may be a discontinuity at the
boundary of the two sections. Second, how to ensure relatively
fast convergence with uneven adjustment of the property
concerned. For the first concern, discontinuity is avoided by
using linear interpolation between two sections. For the second
concern, the weight factor is normalized first and then the
following equation is used to calculate the new point property
value from the old point property value:
where:
New[i] = the new property value at point i
Wt[i] = the normalized weight factor at point i
Ratio = the calculated uniform adjusting ratio
Old[i] = the old property value at point i
Figure 4.11
(4.1)
New i
[ ] 1 Wt i
[ ] Ratio 1
–
( )
×
+
[ ] Old i
[ ]
×
=](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-225-320.jpg)
![HYSYS Oil Manager 4-67
4-67
cutpoint range. As shown in Figure 4.34, the upper cutpoint
temperature for the first range also corresponds to the lower
boiling point of the second cutpoint range, so it does not have to
be re-entered. After the first cut range is defined, only the upper
cutpoint temperature and the number of cuts need to be
supplied for the remaining ranges. If the final cutpoint
temperature is not equal to or greater than the FBP, HYSYS
combines the material between the FBP and the last cut
temperature with the material in the last component.
For example, assume that the IBP and FBP are 40 and 1050°F
respectively, the initial cut temperature is 100, the upper limit
for the first cut is 500 degrees, and the number of cuts in the
first range is eight.
Since the boiling width for each component in the first cut range
is 50°F (i.e., [500-100]/8), the first component's NBP is at the
centroid volume of the 40 to 150 cut, in this case approximately
95°F. The remaining components have NBP values of
approximately 175, 225, 275, 325, 375, 425 and 475°F. The
upper temperature for the second range is 1,000 and the
number of cuts is equal to 5. Since the FBP is 1050, the material
in the boiling range from 1,000 to 1,050 is included with the last
component.](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-268-320.jpg)
![HYSYS Oil Manager 4-87
4-87
4.8.3 Install Oil Tab
The Install Oil tab of the Oil Characterization property view is
shown below:
You may install a calculated Blend into your HYSYS case; it
appears in the Oil Name column of the table. Simply provide a
Stream name for that Blend, and ensure that the Install
checkbox is selected. You may use an existing stream name, or
create a new one. If you do not provide a name or you cleared
the Install checkbox(es), the hypocomponent is not attached to
the fluid package. You can install an oil to a specific
subflowsheet in your case by specifying this in the Flow Sheet
column.
Each installed Oil appears in the component list as a series of
hypocomponents named NBP[1] ***, NBP[2] ***, with the 1
representing the first oil installed, 2 the second, etc.; and ***
the average boiling point of the individual Oil components.
HYSYS also assigns the Light Ends composition, if present, in
Figure 4.47
If you want to install the hypocomponent into a non-
Associated Fluid Package, Add the Oil Hypo group from the
Components tab of that Fluid Package property view.](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-288-320.jpg)
![5-12 Reactions
5-12
5.3.3 Equilibrium Reaction
The Equilibrium Reaction computes the conversion for any
number of simultaneous or sequential reactions with the
reaction equilibrium parameters and stoichiometric constants
you provide.
The Equilibrium constant can be expressed as follows:
where:
K = Equilibrium constant
[BASE]ej = Basis for component j at equilibrium
vj = Stoichiometric coefficient for the jth
component
Nc = Number of components
The equilibrium constant ln(K) may be considered fixed, or
calculated as a function of temperature based on a number of
constants:
where:
Alternatively, you may supply tabular data (equilibrium constant
versus temperature), and HYSYS automatically calculates the
(5.3)
This equation is only valid when BASE (i.e., concentration) is
at equilibrium composition.
(5.4)
K BASE
[ ]ej
( )
vj
j 1
=
Nc
∏
=
Ln Keq
( ) a b
+
=
a A B
T
--
- C T
( )
ln
⋅ D T
⋅
+ + +
=
E T
2
F T
3
G T
4
H T
⋅
+
⋅
+
⋅
+
⋅
=](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-329-320.jpg)
![Reactions 5-21
5-21
Thermodynamic Consistency
Crucial to the specification of the reverse reaction equation is
maintaining thermodynamic consistency so that the equilibrium
rate expression retains the form of Equation (5.3). Failure to
do so may produce erroneous results from HYSYS.
Consider the previously mentioned reaction:
with the forward kinetics following the relationship:
Stoichiometric
Coefficient
Necessary for every component in the reaction. The
Stoichiometric Coefficient is negative for a reactant
and positive for a product. The Stoichiometric
Coefficient need not be an integer; fractional
coefficients are acceptable. You may specify the
coefficient for an inert component as 0, which in most
cases is the same as not including the component in
the list. However, you must include components that
have an overall stoichiometric coefficient of zero and a
non-zero order of reaction (i.e., a component that
might play the role of a catalyst). The Kinetic Reaction,
which allows you to specify the Stoichiometric
Coefficient and the order of reaction, makes it possible
to correctly model this situation.
Forward and
Reverse Orders
These are reaction orders. HYSYS initially fixes the
orders of reaction according to the corresponding
stoichiometric coefficient. These may be modified by
directly entering the new value into the appropriate
cell. For instance, in the following reaction:
the kinetic rate law is
When the stoichiometric coefficients are entered for
the reaction, HYSYS sets the forward orders of reaction
for CO and Cl2 at 1. Simply enter 1.5 into the Forward
Order cell for Cl2 to correctly model the reaction order.
(5.8)
Input Required Description
CO Cl2
+ COCl2
→
rCO k CO
[ ] Cl2
[ ]
3 2
⁄
=
CO Cl2 COCl2
↔
+
rateforward kf CO
[ ] Cl2
[ ]
3 2
⁄
=](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-338-320.jpg)
![5-22 Reactions
5-22
Now suppose you want to add the reverse kinetic reaction. Since
the forward reaction is already known, the order of the reverse
reaction has to be derived in order to maintain thermodynamic
consistency. Suppose a generic kinetic relationship is chosen:
where:
= the unknown values of the order of the three
components
Equilibrium is defined as the moment when:
The equilibrium constant K is then equal to:
To maintain the form of the equilibrium equation seen in
Equation (5.3), K is also equal to:
Now combining the two relationships for K found in Equation
(5.10) and Equation (5.11):
To maintain thermodynamic consistency: must be 0, must
be 0.5 and must be equal to 1.
(5.9)
(5.10)
(5.11)
(5.12)
ratebackward kr CO
[ ]
α
Cl2
[ ]
β
COCl2
[ ]
γ
=
α β γ
, ,
rateforward ratebackward
– 0
=
K
kf
kr
---
-
CO
[ ]
α
Cl2
[ ]
β
COCl2
[ ]
γ
CO
[ ] Cl2
[ ]
3 2
⁄
----------------------------------------------------------
= =
K
COCl2
[ ]
CO
[ ] Cl2
[ ]
--------------------------
-
=
CO
[ ]
α
Cl2
[ ]
β
COCl2
[ ]
γ
CO
[ ] Cl2
[ ]
3 2
⁄
----------------------------------------------------------
COCl2
[ ]
CO
[ ] Cl2
[ ]
--------------------------
-
=
α β
γ](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-339-320.jpg)
![Property Methods & Calculations A-13
A-13
Peng-Robinson Stryjek-Vera
The Peng-Robinson Stryjek-Vera (PRSV) equation of state is a
two-fold modification of the PR equation of state that extends
the application of the original PR method for moderately non-
ideal systems. It is shown to match vapour pressures curves of
pure components and mixtures more accurately than the PR
method, especially at low vapour pressures.
It is successfully extended to handle non-ideal systems giving
results as good as those obtained using excess Gibbs energy
functions like the Wilson, NRTL or UNIQUAC equations.
One of the proposed modifications to the PR equation of state by
Stryjek and Vera was an expanded alpha ( ) term that became
a function of acentricity and an empirical parameter ( ) used
for fitting pure component vapour pressures.
(A.5)
Tcij
Tci
Tcj
( )
1 2
⁄
= Tcii
Tci
= Tcjj
Tcj
=
vcm
xixjvcij
j
∑
i
∑
=
vcij
1
8
--
- vci
1 3
⁄
vcj
1 3
⁄
+
( )
3
=
vci
zci
RTci
pci
---------
-
= zci
0.2905 0.085ωi
–
=
pcm
zcm
RTcm
vcm
-----------
-
= zcm
0.2905 0.085ωm
–
=
ωm xiωi
i
∑
=
α
κi
αi 1 κi 1 Tr
0.5
–
( )
+
[ ]
2
=
κi κ0i κ
+ 1i
1 Tri
0.5
+
( ) 0.7 Tri
0.5
–
( )
=
κ0i 0.378893 1.4897153ωi 0.17131848ωi
2
– 0.0196554ωi
3
+ +
=](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-396-320.jpg)
![Property Methods & Calculations A-29
A-29
parameter values stored in HYSYS or any user supplied value for
further fitting the equation to a given set of data.
The Margules activity coefficient model is represented by the
following equation:
where:
= activity coefficient of component i
xi = mole fraction of component i
Ai =
Bi =
T = temperature (K)
n = total number of components
aij = non-temperature dependent energy parameter between
components i and j
bij = temperature dependent energy parameter between
components i and j [1/K]
aji = non-temperature dependent energy parameter between
components j and i
bji = temperature dependent energy parameter between
components j and i [1/K]
NRTL
The NRTL (Non-Random-Two-Liquid) equation, proposed by
Renon and Prausnitz in 1968, is an extension of the original
Wilson equation. It uses statistical mechanics and the liquid cell
theory to represent the liquid structure. These concepts,
combined with Wilson's local composition model, produce an
(A.17)
γ i
ln 1.0 xi
–
[ ]
2
Ai 2xi Bi Ai
–
( )
+
[ ]
=
γ i
xj
aij bijT
+
( )
1.0 xi
–
( )
--------------------------
-
j 1
=
n
∑
xj
aji bjiT
+
( )
1.0 xi
–
( )
--------------------------
-
j 1
=
n
∑](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-412-320.jpg)
![A-30 Property Methods
A-30
equation capable of representing VLE, LLE and VLLE phase
behaviour.
Like the Wilson equation, the NRTL is thermodynamically
consistent and can be applied to ternary and higher order
systems using parameters regressed from binary equilibrium
data. It has an accuracy comparable to the Wilson equation for
VLE systems.
The NRTL equation in HYSYS contains five adjustable
parameters (temperature dependent and independent) for
fitting per binary pair. The NRTL combines the advantages of the
Wilson and van Laar equations.
• Like the van Laar equation, NRTL is not extremely CPU
intensive and can represent LLE quite well.
• Unlike the van Laar equation, NRTL can be used for dilute
systems and hydrocarbon-alcohol mixtures, although it
may not be as good for alcohol-hydrocarbon systems as
the Wilson equation.
The NRTL equation in HYSYS has the following form:
where:
= activity coefficient of component i
Gij =
=
xi = mole fraction of component i
T = temperature (K)
Due to the mathematical structure of the NRTL equation, it
can produce erroneous multiple miscibility gaps.
(A.18)
γ i
ln
τ jixjGji
j 1
=
n
∑
xkGki
k 1
=
n
∑
----------------------------
-
xjGij
xkGkj
k 1
=
n
∑
-----------------------
- τ ij
τ mjxmGmj
m 1
=
n
∑
xkGkj
k 1
=
n
∑
------------------------------------
-
–
j 1
=
n
∑
+
=
γ i
τ ijαij
–
[ ]
exp
τ ij
aij bijT
+
RT
---------------------
-](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-413-320.jpg)
![Property Methods & Calculations A-33
A-33
Aw = van der Waals area
ri = van der Waals volume parameter - Vwi /(15.17)
Vw = van der Waals volume
Van Laar
The van Laar equation was the first Gibbs excess energy
representation with physical significance. The van Laar equation
in HYSYS is a modified form of that described in “Phase
Equilibrium in Process Design” by H.R. Null. This equation fits
many systems quite well, particularly for LLE component
distributions. It can be used for systems that exhibit positive or
negative deviations from Raoult's Law, however, it cannot
predict maxima or minima in the activity coefficient. Therefore,
it generally performs poorly for systems with halogenated
hydrocarbons and alcohols. Due to the empirical nature of the
equation, caution should be exercised in analyzing multi-
component systems. It also has a tendency to predict two liquid
phases when they do not exist.
The van Laar equation has some advantages over the other
activity models in that it requires less CPU time and can
represent limited miscibility as well as three phase equilibrium.
HYSYS uses the following extended, multi-component form of
the van Laar equation.
where:
= activity coefficient of component i
xi = mole fraction of component i
The van Laar equation also performs poorly for dilute
systems and cannot represent many common systems, such
as alcohol-hydrocarbon mixtures, with acceptable accuracy.
(A.20)
γ i
ln Ai 1.0 zi
–
[ ]
2
1.0 Eizi
+
( )
=
γ i](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-416-320.jpg)
![A-34 Property Methods
A-34
Ai =
Bi =
Ei = -4.0 if Ai and Bi < 0.0, otherwise 0.0
zi =
T = temperature (K)
n = total number of components
aij = non-temperature dependent energy parameter between
components i and j
bij = temperature dependent energy parameter between
components i and j [1/K]
aji = non-temperature dependent energy parameter between
components j and i
bji = temperature dependent energy parameter between
components j and i [1/K]
The four adjustable parameters for the van Laar equation in
HYSYS are the aij, aji, bij, and bji terms. The equation will use
parameter values stored in HYSYS or any user supplied value for
further fitting the equation to a given set of data.
Wilson
The Wilson equation, proposed by Grant M. Wilson in 1964, was
the first activity coefficient equation that used the local
composition model to derive the Gibbs Excess energy
expression. It offers a thermodynamically consistent approach
to predicting multi-component behaviour from regressed binary
equilibrium data. Our experience also shows that the Wilson
equation can be extrapolated with reasonable confidence to
other operating regions with the same set of regressed energy
parameters.
xj
aij bijT
+
( )
1.0 xi
–
( )
--------------------------
-
j 1
=
n
∑
xj
aji bjiT
+
( )
1.0 xi
–
( )
--------------------------
-
j 1
=
n
∑
Aixi
Aixi Bi 1.0 xi
–
( )
+
[ ]
------------------------------------------------
-](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-417-320.jpg)
![A-52 Enthalpy & Entropy Departure
A-52
where:
R = Ideal Gas constant
H = Enthalpy
S = Entropy
subscripts:
ID = Ideal Gas
o = reference state
PRSV
The PRSV equation of state is an extension of the Peng-Robinson
equation using an extension of the expression as shown
below:
This results in the replacement of the term in the definitions
of the A and B terms shown previously by the term shown
above.
A.4.2 Activity Models
The Liquid enthalpy and entropy for Activity Models is based on
the Cavett Correlation as shown below:
(A.34)
a xixj aiaj
( )
0.5
1 kij
–
( )
j 1
=
N
∑
i 1
=
N
∑
=
κ
αi 1 κi 1 Tr
0.5
–
( )
+
[ ]
2
=
κi κ0i 1 Tri
0.5
+
( ) 0.7 Tri
–
( )
=
κ0i 0.378893 1.4897153ωi 0.17131848ωi
2
– 0.0196554ωi
3
+ +
=
αi
αi](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-435-320.jpg)
![C-10 Equilibrium Solubility
C-10
(C.10)
(C.11)
(C.12)
(C.13)
(C.14)
Equilibrium Relations
(C.15)
(C.16)
(C.17)
(C.18)
(C.19)
(C.20)
(C.21)
(C.22)
Chemical Reactions
H2O H+
⇔ OH-
+
H2S H+
⇔ HS-
+
CO2 H2O
+ H+
⇔ HCO3
-
+
HS- H+
⇔ S=
+
HCO3
- H+
⇔ CO3
=
+
K1
H+
[ ] R1R2NH
[ ]
R1R2NH2
+
[ ]
--------------------------------------
-
=
K2
H+
[ ] R1R2R3N
[ ]
R1R2R3NH+
[ ]
----------------------------------------
-
=
K3
HCO3
-
[ ] R1R2NH
[ ]
R1R2NCOO-
[ ]
-----------------------------------------------
-
=
K4
H+
[ ] OH-
[ ]
H2O
[ ]
---------------------------
-
=
K5
H+
[ ] HS-
[ ]
H2S
[ ]
--------------------------
=
K6
H+
[ ] HCO3
-
[ ]
CO2
[ ] H2O
[ ]
--------------------------------
-
=
K7
H+
[ ] S=
[ ]
HS-
[ ]
----------------------
-
=
K8
H+
[ ] CO3
=
[ ]
HCO3
-
[ ]
----------------------------
-
=](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-489-320.jpg)
![Amines Property Package C-11
C-11
Phase Equilibria
(C.23)
(C.24)
Charge Balance
(C.25)
Mass Balance
(C.26)
(C.27)
(C.28)
(C.29)
yH2SφH2S
V
P HH2S H2S
[ ]
=
yCO2
φCO2
V
P HCO2
CO2
[ ]
=
H+
[ ] R1R2NH2
+
[ ] R1R2R3NH+
[ ]
+ +
OH-
[ ] R1R2NCOO-
[ ] HCO3
-
[ ] HS-
[ ] 2 CO3
=
[ ] 2 S=
[ ]
+ + + + +
=
C1 2 amine
–
, R1R2NH
[ ] R1R2NH2
+
[ ] R1R2NCOO-
[ ]
+ +
=
C3 amine
– R1R2R3N
[ ] R1R2R3NH+
[ ]
+
=
CCO2
C1 2 amine
–
, C3 amine
–
+
( )αCO2
CO2
[ ] R1R2NCOO-
[ ] HCO3
-
[ ] CO3
=
[ ]
+ + +
= =
CH2S C1 2 amine
–
, C3 amine
–
+
( )αH2S
H2S
[ ] HS-
[ ] S=
[ ]
+ +
= =](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-490-320.jpg)
![C-16 Equilibrium Solubility
C-16
where:
The expressions of activity coefficient for solvent N and ion M+
are as follows:
(C.48)
(C.49)
g
s
RT
------
- aijxixj aijkxixjxk
k
∑
j
∑
i
∑
+
a
∑
c
∑
=
g
s
RT
------
- xI xn FcFaWnca xnxn' Ann'xn' An'nxn
+
( )
n
""
∑
n
∑
+
a
∑
c
∑
n
∑
=
Ann' 2ann' 3an'n
+
=
Ann' 2ann' 3ann'n''
+
=
Wnca 2wnc 2wna wca
– 2unc 2una
+ + +
( ) 4
⁄
=
wij 2aij 3 2 aiij aijj
+
( )
⁄
+
=
uij 3 2 aiij aijj
–
( )
⁄
=
γ N
ln
2AxIx
3 2
⁄
1 ρIx
1 2
⁄
+
------------------------- xcxaBca αIx
1 2
⁄
–
( ) xI 1 xN
–
( ) FcFaWNca
xI ′ xn FcFaWnca ′ xn ANnxn 1 2xN
–
( ) 2AnNxN 1 xN
–
( )
+
[ ]
2 ′ ′ xnxn' Ann'xn' An'nxn
+
( )
n'
∑
n
∑
–
n
∑
+
a
∑
c
∑
n
∑
–
a
∑
c
∑
+
exp
a
∑
c
∑
–
=](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-495-320.jpg)
![C-18 Equilibrium Solubility
C-18
The function of g(x) is expressed by
where:
Ax is the Debye-Huckel parameter on a mole fraction basis:
where:
Ci, Cn = molar concentrations of the ion i and solvent n,
respectively
I = ionic strength in molar concentration
= Debye-Huckel parameter, which is a function of
temperature, density and dielectric constant of the
mixed solvents
= related to the hard-core collision diameter, or distance of
closest approach between ions in solution
An'n and Ann' = interaction parameters between and among
the molecular species, respectively
Bca = hard sphere repulsion parameter between ions
Wnca = the interaction parameter between ions and between
ion and solvent
Parameters An'n, Ann', Bca and Wnca share the same function
of temperature:
(C.55)
(C.56)
(C.57)
g x
( ) 2 1 1 x
+
( ) x
–
( )
exp
–
[ ] x
2
⁄
=
x αIx
1 2
⁄
2I
1 2
⁄
= =
I 1 2
⁄ zi
2
Ci
∑
=
Ax Aφ Cn
∑
1 2
⁄
=
Aφ
ρ
Y a b T
⁄
+
=](https://image.slidesharecdn.com/aspenhysyssimulationbasis-230512173541-c5e0aadc/85/AspenHYSYSSimulationBasis-pdf-497-320.jpg)
AspenHYSYSSimulationBasis.pdf
- 2. Copyright October 2005 Copyright © 1981-2005 by Aspen Technology, Inc. All rights reserved. Aspen Accounting.21™, Aspen ACM Model Export, Aspen ACOL™, Aspen ACX™ Upgrade to ACOL™, Aspen Adsim®, Aspen Advisor™, Aspen Aerotran®, Aspen Alarm & Event™, Aspen APLE™, Aspen Apollo™, Aspen AtOMS™, Aspen Batch and Event Extractor, Aspen Batch Plus®, Aspen Batch.21™, Aspen Batch.21™ CBT, Aspen BatchCAD™, Aspen BatchSep™, Aspen Blend Model Library™, Aspen Blend™, Aspen BP Crude Oil Database, Aspen Calc CBT, Aspen Calc™, Aspen Capable-to-Promise®, Aspen CatRef®, Aspen Chromatography®, Aspen Cim-IO Core™, Aspen Cim-IO™ for @AGlance, Aspen Cim-IO™ for ABB 1180/ 1190 via DIU, Aspen Cim-IO™ for Bailey SemAPI, Aspen Cim-IO™ for DDE, Aspen Cim-IO™ for Eurotherm Gauge via DCP, Aspen Cim-IO™ for Fisher-Rosemount Chip, Aspen Cim-IO™ for Fisher-Rosemount RNI, Aspen Cim-IO™ for Foxboro FOXAPI, Aspen Cim-IO™ for G2, Aspen Cim-IO™ for GE FANUC via HCT, Aspen Cim-IO™ for Hitachi Ex Series, Aspen Cim-IO™ for Honeywell TDC 3000 via HTL/access, Aspen Cim-IO™ for Intellution Fix, Aspen Cim-IO™ for Measurex MCN, Aspen Cim-IO™ for Measurex ODX, Aspen Cim-IO™ for Moore Apacs via Nim (RNI), Aspen Cim-IO™ for OPC, Aspen Cim-IO™ for PI, Aspen Cim- IO™ for RSLinx, Aspen Cim-IO™ for SetCim/InfoPlus-X/InfoPlus.21, Aspen Cim-IO™ for Toshiba Tosdic, Aspen Cim-IO™ for ULMA 3D, Aspen Cim-IO™ for Westinghouse, Aspen Cim-IO™ for WonderWare InTouch, Aspen Cim-IO™ for Yokogawa ACG10S, Aspen Cim-IO™ for Yokogawa EW3, Aspen Collaborative Forecasting™, Aspen Compliance.21™, Aspen COMThermo®, Aspen CPLEX Optimizer, Aspen CPLEX Optimizer for DPO, Aspen Crude Manager™, Aspen Crude Trading & Marketing™, Aspen Custom Modeler®, Aspen Data Source Architecture™, Aspen Decision Analyzer™, Aspen Demand Manager™, Aspen DISTIL™, Aspen Distribution Scheduler™, Aspen DMCplus®, Aspen DMCplus® CBT, Aspen DMCplus® Composite, Aspen Downtime Monitoring Application, Aspen DPO™, Aspen Dynamics®, Aspen eBRS™, Aspen FCC®, Aspen FIHR™, Aspen FLARENET™, Aspen Fleet Operations Management™, Aspen FRAN™, Aspen Fuel Gas Optimizer™, Aspen Grade-IT™, Aspen Harwell Subroutine Library™, Aspen Hetran®, Aspen HPI Library, Aspen HTFS Research Network™, Aspen HX-Net Operations™, Aspen HX-Net®, Aspen Hydrocracker®, Aspen Hydrotreater™, Aspen HYSYS Amines™, Aspen HYSYS Crude™, Aspen HYSYS Data Rec™, Aspen HYSYS Dynamics™, Aspen HYSYS Johnson Matthey Reactor Models™, Aspen HYSYS OLGAS 3-Phase™, Aspen HYSYS OLGAS™, Aspen HYSYS OLI Interface™, Aspen HYSYS Optimizer™, Aspen HYSYS PIPESYS™, Aspen HYSYS Tacite™, Aspen HYSYS Upstream Dynamics™, Aspen HYSYS Upstream™, Aspen HYSYS®, Aspen Icarus Process Evaluator®, Aspen Icarus Project Manager®, Aspen Icarus Project Scheduler™, Aspen InfoPlus.21®, Aspen Inventory Management & Operations Scheduling™, Aspen Inventory Planner™, Aspen IQmodel Powertools™, Aspen IQ™, Aspen Kbase®, Aspen Lab.21, Aspen MBO™, Aspen MPIMS™, Aspen Multivariate Server™, Aspen MUSE™, Aspen OnLine®, Aspen Open Simulation Environment Base™, Aspen Operations Manager - Event Management™, Aspen Operations Manager - Integration Infrastructure™, Aspen Operations Manager - Integration Infrastructure™ Advisor, Aspen Operations Manager - Integration Infrastructure™ Base, Aspen Operations Manager - Integration Infrastructure™ COM, Aspen Operations Manager - Integration Infrastructure™ Files, Aspen Operations Manager - Integration Infrastructure™ IP.21/SAP-PPPI, Aspen Operations Manager - Integration Infrastructure™ IP21, Aspen Operations Manager - Integration Infrastructure™ OPC, Aspen Operations Manager - Integration Infrastructure™ Orion, Aspen Operations Manager - Integration Infrastructure™ PIMS, Aspen Operations Manager - Integration Infrastructure™ Relational Databases, Aspen Operations Manager - Integration Infrastructure™ SAP R3, Aspen Operations Manager - Integration Infrastructure™ System Monitoring, Aspen Operations Manager - Integration Infrastructure™ Utilities, Aspen Operations Manager - Performance Scorecarding™, Aspen Operations Manager - Role Based Visualization™ MS SharePoint, Aspen Operations Manager - Role Based Visualization™ TIBCO, Aspen Operations Tracking™, Aspen Order Credit Management™, Aspen Orion Planning™, Aspen Orion XT™, Aspen OSE™ - Oil & Gas Adapter, Aspen OSE™ - Oil & Gas Optimizer, Aspen PEP Process Library™, Aspen PIMS Advanced Optimization™, Aspen PIMS CPLEX Optimizer, Aspen PIMS Distributed Processing™, Aspen PIMS Enterprise Edition™, Aspen PIMS Global Optimization™, Aspen PIMS Mixed Integer Programming™, Aspen PIMS Simulator Interface™, Aspen PIMS Solution Ranging™, Aspen PIMS Submodel Calculator™, Aspen PIMS XNLP Optimizer™, Aspen PIMS XPRESS Optimizer, Aspen PIMS-SX, Aspen PIMS™, Aspen PIMSXCHG, Aspen PIPE™, Aspen Plant Planner & Scheduler™, Aspen Plant Scheduler Lite™, Aspen Plant Scheduler™, Aspen Plus HTRI Interface, Aspen Plus OLI Interface™, Aspen Plus Optimizer™, Aspen Plus SPYRO Equation Oriented Interface, Aspen Plus®, Aspen Plus® CBT, Aspen Polymers Plus®, Aspen PPIMS™, Aspen Process Explorer™, Aspen Process Explorer™ CBT, Aspen Process Manual™ Applied Rheology, Aspen Process Manual™ Bulk Solids Handling, Aspen Process Manual™ Crystallization, Aspen Process Manual™ Drying, Aspen Process Manual™ Gas Cleaning, Aspen Process Manual™ Internet Mode, Aspen Process Manual™ Intranet Mode, Aspen Process Manual™ Mini-Manuals, Aspen Process Manual™ Slurry Handling, Aspen Process Manual™ Solid Liquid Separation, Aspen Process Manual™ Solvent Extraction, Aspen Process Manual™ Waste Water Treatment, Aspen Process Order™, Aspen Process Recipe®, Aspen Process Tools™, Aspen Product Tracking, Aspen Production Control Web Server™, Aspen ProFES® 2P Wax, Aspen ProFES® Tranflo, Aspen Profile.21™, Aspen Properties®, Aspen Pumper Log™, Aspen Q Server™, Aspen Quality Management™, Aspen RateSep™, Aspen RefSYS CatCracker™, Aspen RefSYS Hydrocracker™, Aspen RefSYS Reformer™, Aspen RefSYS™, Aspen Report Writer™, Aspen Retail Automated Stock Replenishment™, Aspen Retail Resource Scheduling Optimization™, Aspen Richardson Cost Factor Manual™, Aspen Richardson General Construction Estimating Standards™, Aspen Richardson Process Plant Construction Estimating Standards™, Aspen Richardson WinRace Database™, Aspen RTO Watch™, Aspen SCM™, Aspen SmartStep Advanced™, Aspen Specialty Products Automated Stock Replenishment™, Aspen Specialty Products Resource Scheduling Optimization™, Aspen Split™, Aspen State Space Controller™, Aspen STX™ Upgrade to TASC™, Aspen SULSIM®, Aspen Supply Chain Analytics™ - Demand Management, Aspen Supply Chain Analytics™ - Plant Scheduling, Aspen Supply Chain Analytics™ - S&OP, Aspen Supply Chain Analytics™ - Supply Planning, Aspen Supply Chain Connect™, Aspen Supply Planner™, Aspen Supply Planning - Strategic Analyzer™, Aspen Tank Management™, Aspen TASC™, Aspen Teams®, Aspen TICP™, Aspen Transition Manager™, Aspen Utilities™, Aspen Voice Fulfillment Management™, Aspen Watch™, Aspen Water™, Aspen Web Fulfillment Management™, Aspen XPIMS™, Aspen XPRESS Optimizer, Aspen XPRESS Optimizer for DPO, Aspen Zyqad Development™, Aspen Zyqad™, aspenONE Product Trading & Blending™, SLM™, SLM Commute™, SLM Config Wizard™, the Aspen leaf logo, and Plantelligence are trademarks or registered trademarks of Aspen Technology, Inc., Cambridge, MA. All other brand and product names are trademarks or registered trademarks of their respective companies. This manual is intended as a guide to using AspenTech’s software. This documentation contains AspenTech proprietary and confidential information and may not be disclosed, used, or copied without the prior consent of AspenTech or as set forth in the applicable license agreement. Users are solely responsible for the proper use of the software and the application of the results obtained. Although AspenTech has tested the software and reviewed the documentation, the sole warranty for the software may be found in the applicable license agreement between AspenTech and the user. ASPENTECH MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED, WITH RESPECT TO THIS DOCUMENTATION, ITS QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. Corporate Aspen Technology, Inc. Ten Canal Park Cambridge, MA 02141-2201 USA Phone: (617) 949-1000 Toll Free: (1) (888) 996-7001 Fax: (617) 949-1030 Website http://www.aspentech.com
- 3. iii iii Technical Support Online Technical Support Center........................................................ iv Phone and E-mail................................................................................ v
- 4. iv iv Online Technical Support Center AspenTech customers with a valid license and software maintenance agreement can register to access the Online Technical Support Center at: http://support.aspentech.com You use the Online Technical Support Center to: • Access current product documentation. • Search for technical tips, solutions, and frequently asked questions (FAQs). • Search for and download application examples. • Search for and download service packs and product updates. • Submit and track technical issues. • Search for and review known limitations. • Send suggestions. Registered users can also subscribe to our Technical Support e- Bulletins. These e-Bulletins proactively alert you to important technical support information such as: • Technical advisories • Product updates • Service Pack announcements • Product release announcements
- 5. v v Phone and E-mail Customer support is also available by phone, fax, and e-mail for customers who have a current support contract for their product(s). Toll-free charges are listed where available; otherwise local and international rates apply. For the most up-to-date phone listings, please see the Online Technical Support Center at: http://support.aspentech.com Support Centers Operating Hours North America 8:00 - 20:00 Eastern time South America 9:00 - 17:00 Local time Europe 8:30 - 18:00 Central European time Asia and Pacific Region 9:00 - 17:30 Local time
- 6. vi Table of Contents Technical Support.................................................... iii Online Technical Support Center ............................iv Phone and E-mail................................................. v HYSYS Thermodynamics......................................... vii 1 Components ......................................................... 1-1 1.1 Introduction .................................................... 1-2 1.2 Component List Property View ........................... 1-4 2 Fluid Package ....................................................... 2-1 2.1 Introduction .................................................... 2-2 2.2 Fluid Packages Tab........................................... 2-3 2.3 Adding a Fluid Package - Example ...................... 2-5 2.4 HYSYS Fluid Package Property View .................... 2-7 2.5 COMThermo Property View ...............................2-84 2.6 References ...................................................2-109 3 Hypotheticals ....................................................... 3-1 3.1 Introduction .................................................... 3-3 3.2 Hypo Manager ................................................. 3-4 3.3 Adding a Hypothetical - Example ........................ 3-5 3.4 Creating a Hypo Group ....................................3-13 3.5 Hypothetical Component Property View ..............3-26 3.6 Solid Hypotheticals..........................................3-36 3.7 Cloning Library Components .............................3-42 3.8 Hypo Controls.................................................3-44 3.9 References .....................................................3-45 4 HYSYS Oil Manager............................................... 4-1 4.1 Introduction .................................................... 4-3 4.2 Oil Characterization .......................................... 4-4
- 7. vii 4.3 Petroleum Fluids Characterization Procedure ........ 4-9 4.4 Oil Characterization Property View.....................4-14 4.5 Characterizing Assays ......................................4-17 4.6 Hypocomponent Generation..............................4-59 4.7 User Property .................................................4-76 4.8 Correlations & Installation ................................4-81 4.9 TBP Assay - Example .......................................4-88 4.10 Sulfur Curve - Example..................................4-107 4.11 References ...................................................4-115 5 Reactions ............................................................. 5-1 5.1 Introduction .................................................... 5-2 5.2 Reaction Component Selection ........................... 5-3 5.3 Reactions........................................................ 5-6 5.4 Reaction Sets .................................................5-35 5.5 Generalized Procedure .....................................5-45 5.6 Reactions - Example ........................................5-47 6 Component Maps ..................................................6-1 6.1 Introduction .................................................... 6-2 6.2 Component Maps Tab ....................................... 6-2 6.3 Component Map Property View........................... 6-4 7 User Properties .................................................... 7-1 7.1 Introduction .................................................... 7-2 7.2 User Property Tab ............................................ 7-3 7.3 User Property Property View .............................. 7-5 A Property Methods & Calculations..........................A-1 A.1 Introduction .................................................... A-3 A.2 Selecting Property Methods ............................... A-4 A.3 Property Methods............................................. A-9 A.4 Enthalpy & Entropy Departure Calculations ........ A-50 A.5 Physical & Transport Properties ........................ A-57 A.6 Volumetric Flow Rate Calculations .................... A-66 A.7 Flash Calculations .......................................... A-72 A.8 References .................................................... A-82
- 8. viii B Oil Methods & Correlations ...................................B-1 B.1 Introduction .................................................... B-2 B.2 Characterization Method.................................... B-2 B.3 References .................................................... B-11 C Amines Property Package.....................................C-1 C.1 Amines Property Package .................................. C-2 C.2 Non-Equilibrium Stage Model ............................. C-5 C.3 Stage Efficiency ............................................... C-7 C.4 Equilibrium Solubility ........................................ C-9 C.5 Phase Enthalpy .............................................. C-19 C.6 Simulation of Amine Plant Flowsheets ............... C-20 C.7 Program Limitations ....................................... C-24 C.8 References .................................................... C-25 D Glycol Property Package.......................................D-1 D.1 Introduction .................................................... D-2 D.2 Pure Component Vapor Pressure ........................D-4 D.3 Mixing Rules.................................................... D-4 D.4 Phase Equilibrium Prediction ............................ D-12 D.5 Enthalpy/Entropy Calculations.......................... D-13 D.6 References .................................................... D-13 Index.................................................................... I-1
- 9. ix
- 10. vii vii HYSYS Thermodynamics To comprehend why HYSYS is such a powerful engineering simulation tool, you need look no further than its strong thermodynamic foundation. The inherent flexibility contributed through its design, combined with the unparalleled accuracy and robustness provided by its property package calculations leads to the representation of a more realistic model. Not only can you use a wide variety of internal property packages, you can use tabular capabilities to override specific property calculations for more accuracy over a narrow range or use the functionality provided through ActiveX to interact with externally constructed property packages. Through the use of Extensibility, you can extend HYSYS so that it uses property packages that you created within the HYSYS environment. The built-in property packages provide accurate thermodynamic, physical, and transport property predictions for hydrocarbon, non-hydrocarbon, petrochemical, and chemical fluids. The Thermodynamics development group at AspenTech has evaluated experimental data from the world’s most respected sources. Using this experimental data, a database containing in excess of 1500 components and over 16,000 fitted binaries has been created. If a library component cannot be found within the database, a comprehensive selection of estimation methods is available for creating fully defined hypothetical components. HYSYS also contains a powerful regression package that may be used in conjunction with its tabular capabilities. Experimental pure component data, which HYSYS provides for over 1,000 components, can be used as input to the regression package. Alternatively, you can supplement the existing data or supply a complete set of your own data. The regression package fits the input data to one of the numerous mathematical expressions available in HYSYS. This allows you to obtain simulation results for specific
- 11. viii viii thermophysical properties that closely match your experimental data. As new technology becomes available to the market place, AspenTech welcomes the changes. HYSYS was designed with the foresight that software technology is ever-changing and that a software product must reflect these changes. HYSYS has incorporated COMThermo which is an advanced thermodynamic calculation framework based on Microsofts COM (Component Object Model) technology. The COMThermo framework is fully componentized which makes it possible to develop independent, extensible, customizable, and encapsulated thermodynamic calculation modules. It acts like a thermodynamic calculation server which allows users to utilize, supplement, or replace any of its components. The framework also encompasses a wide variety of property calculations, flash methods, databases, etc. The calculation methods cover all of the thermodynamic calculation packages in HYSYS. In future releases of HYSYS, the old HYSYS thermodynamic engine will gradually be replaced by COMThermo. Simulation Basis Manager One of the important concepts upon which HYSYS is based is that of environments. The Basis Environment allows you to input or access information within the Simulation Basis Manager while the other areas of HYSYS are put on hold. This helps to maintain peak efficiency by avoiding unnecessary flowsheet calculations. Once you return to the Build Environment, all changes that were made in the Basis Environment take effect at the same time. Conversely, all thermodynamic data is fixed and is not changed as manipulations to the flowsheet take place in the Build Environment. Use the Hot Key CTRL B to re-enter the Basis Environment from any Environment.
- 12. ix ix Another advantage of the Simulation Basis Environment is the assurance that all the basic thermodynamic requirements are provided before a simulation case is built. The minimum information required before leaving the Simulation Basis Manager is as follows: • At least one installed fluid package with an attached Property Package. • At least one component in the fluid package. • A fluid package specified as the Default fluid package. This is automatically done by HYSYS after the first fluid package is installed. The Simulation Basis Manager can be accessed at any stage during the development of a simulation case. When a New Case is created, the first property view that appears is the Simulation Basis Manager. You can also return to the Basis Environment from the Main or Sub-Flowsheet Environment at any time to make changes to the thermodynamic information. You can create as many fluid packages as you like in the Simulation Basis Manager. This functionality makes it possible for each flowsheet in the case to be associated with an individual fluid package, thus allowing it to have its own particular property package and set of components. The Default fluid package is assigned to each new Sub-Flowsheet that is created while in the Build Environment. If a different fluid package is desired, you can re-enter the Basis Environment to perform the required change. Provided that changes are made in the Basis Environment, HYSYS displays a message box each time you re-enter the Main Build Environment. Figure 1.1
- 13. x x This provides a means of leaving HYSYS in HOLDING mode so that you can perform complimentary changes (for example, new stream compositions or column specifications) to the flowsheet prior to the Basis modifications taking effect. The Simulation Basis Manager property view allows you to create and manipulate fluid packages in the simulation. Whenever you create a New Case, HYSYS opens to the Components tab of the Simulation Basis Manager. The tabs available on the Simulation Basis Manager property view are described in the table below: If HYSYS is left in HOLDING mode, calculations can be activated by clicking the Solver Active icon in the Toolbar. Figure 1.2 Tab Description Components Allows access to a component list which is associated with a fluid package. When adding a new component list or editing a current list, the Component List property view opens. This property view is designed to simplify adding components to the case. Fluid Pkgs Allows you to create and manipulate all fluid packages for the simulation case. Also, you can assign a fluid package to each flowsheet that exists within the case and select a Default fluid package, which is automatically used for all new flowsheets. Solver Active icon For more information, refer to Section 5.2 - Simulation Basis Manager from the HYSYS User Guide.
- 14. xi xi Hypotheticals Allows individual Hypotheticals and Hypothetical Groups to be defined for installation into any fluid package. Oil Manager Allows access to the Oil Environment where you can input assay data, cut/blend an oil and define pseudo components for installation in any existing fluid package. Reactions Allows you to install reaction components, create reactions, create reaction sets, attach reactions to reaction sets and attach reaction sets to any existing fluid package. Component Maps Allows you to specify composition across fluid package (sub-flowsheet) boundaries. User Property Create and make user properties available to any fluid package. The Enter Simulation Environment button can be accessed from any of the tabs on the Simulation Basis Manager property view. Tab Description
- 15. xii xii
- 16. Components 1-1 1-1 1 Components 1.1 Introduction................................................................................... 2 1.2 Component List Property View....................................................... 4 1.2.1 Adding Library Components....................................................... 5 1.2.2 Selecting Library Components.................................................... 8 1.2.3 Manipulating the Selected Components List................................ 14 1.2.4 Adding Electrolyte Components................................................ 26 1.2.5 Adding Hypothetical Components ............................................. 28 1.2.6 Adding Components from Existing Component Lists .................... 30
- 17. 1-2 Introduction 1-2 1.1 Introduction The Components Manager is accessed by selecting the Components tab from the Simulation Basis Manager. The Components Manager provides a location where sets of chemical components being modeled may be retrieved and manipulated. These component sets are stored in the form of Component Lists which may be a collection of library pure components or Hypothetical components. The Components Manager always contains a Master Component List that cannot be deleted. The Master Component List contains every component available from “all” component lists. If you add components to any other Component List, they are automatically added to the Master Component List. Also, if you delete a component from the master, it is deleted from any other Component List that is using it. When working with the Fluid Package Manager, components are associated with Fluid Packages through Component Lists. A Component List must be selected for each Fluid Package created. Figure 1.1 For further details regarding to the use of Component Lists with Fluid Packages, see Chapter 2 - Fluid Package.
- 18. Components 1-3 1-3 The Components tab of the Simulation Basis Manager property view contains six buttons which allow you to organize all component lists for the current case. Each button is described in the following table: You cannot associate the Master Component List to a fluid package. Add a component list and associate it to a fluid package. Button Description View Opens the Component List property view for the selected Component List. From this property view, you can add, modify, or remove individual components from the current list. Add Allows you to add a new Component List into the case. When clicked, the Component List property view appears and components associated with the case may be added. New components may be added to the component list by highlighting the component list name and clicking the View button. Delete Allows you to delete a Component List from the case. No warning message is provided before deleting a list and a deleted Component List cannot be recovered. Copy Makes a copy of the selected (highlighted) Component List. The copied version is identical to the original, except for the name. This command may be useful for modifying Component Lists while keeping the original list intact. Import Allows you to import a pre-defined Component List from a disk. When the Import button is selected, the location dialog window for the component list file appears. Component Lists have a file extension of (*.cml). Export Allows you to export the selected Component Lists (*.cml) to disk. The exported list file can be retrieved in another case by using the Import function detailed above. Refresh Allows you to reload component data from the database. For example, if you have a case from a previous version, the data is updated from the older version to the latest version.
- 19. 1-4 Component List Property View 1-4 1.2 Component List Property View When adding or viewing an existing Component List from the Components tab of the Simulation Basis Manager property view, the Component List property view is opened. The Component List property view is designed to simplify adding components to a Component List. Access is provided to all Library components within HYSYS, which include the traditional components, electrolytes, defined Hypotheticals, and other existing lists. The property view consists of the following tabs: • The Selected tab allows you to add components and view their properties. The Components page varies according to the tree browser selection in the Add Component group. Figure 1.2 The Name cell displays the name of the component list being viewed. The Add Component tree browser allows you to filter through alternative component lists.
- 20. Components 1-5 1-5 • The Component by Type tab displays all components selected for the component list by its particular type (traditional, electrolytes, hypotheticals, etc.) as shown below. 1.2.1 Adding Library Components The Component List property view shown previously is encountered when you are adding Library components to a Component List. Use the tree browser in the Add Components group to filter the library components for each group listed. The Selected tab has three main groups: • Add Component • Selected Components • Components Available in the Component Library Each group is described separately in the following sections. Figure 1.3
- 21. 1-6 Component List Property View 1-6 Add Component Group The Add Component group contains a tree browser that enables you to filter components by type. Selecting components from the component tree browser determines the type of components that are displayed in the Components Available in Component Library group. A different property view appears depending on whether you are adding Traditional, Electrolytes, Hypothetical, or Other components. Selected Components Group The Selected Components group shows the list of components that have been added. The various functions that allow you to manipulate the list of selected components are listed in the following table: Figure 1.4 Object Description Selected Component List Contains all the currently installed components for a particular component list. Add Pure Adds the highlighted component(s) from the Components Available group to the Selected Component List. Substitute Swaps the highlighted selected components with the highlighted available component. Remove Comp Deletes the highlighted component from the Selected Component List. Add Component tree browser
- 22. Components 1-7 1-7 Components Available in the Component Library Group The Components Available in the Component Library group displays library components depending on the filtered method used. Sort List Accesses the Move Components property view, where you can change the order of the selected component list. View Comp Accesses the selected component’s identification property view. When substituting components, HYSYS replaces the component throughout the case (i.e., all specifications for the old component are transferred to the new component). However, the substitution function does not automatically handle components that are part of a Reaction. Figure 1.5 Object Description
- 23. 1-8 Component List Property View 1-8 The group has several features designed to make the selection of components as efficient and convenient as possible. 1.2.2 Selecting Library Components As mentioned previously, library components are selected from the Components Available in the Component Library group, and placed in the Selected Components group. There are many ways in which you can select components for a component list. Once you become familiar with the available methods for component selection, you can select the procedure that you find most convenient. The process of adding components from the component library to the Selected Components list can be divided into three sub- processes. By visualizing the process of component selection in this way, you are made aware of all the available possibilities Object Description Match As you type in this cell, HYSYS filters the component list to locate the component that best matches your current input. This depends on the radio button selected. View Filter button This button opens the Filters floating property view which contains a range of property packages and component filtering options to assist in your component selection process. SimName FullName Synonym Formula These three radio buttons determine the context of your input in the Match cell. Show Synonyms When this checkbox is selected HYSYS includes known synonyms for each component in the list. Cluster This checkbox is available only when the Show Synonyms checkbox is selected. By selecting the Cluster checkbox, all synonyms are indented and listed below the component name. Otherwise, the synonyms are listed alphabetically throughout the list. Whenever a component(s) is highlighted in the Available List, click the Add Pure button to move it to the Selected Component List. For further details, refer to Filter Options for Traditional Components.
- 24. Components 1-9 1-9 offered by HYSYS. You can then adopt the most logical and efficient approach to use each time you build a case. For component addition to the component list, the following methods are recommended: 1. Filter the library list. 2. Select the desired component(s). 3. Transfer the component(s) to the Selected Components list. Filtering the Component List for Traditional Components A recommended practice for component selection is the use of the available tools which HYSYS provides for filtering the component library. This narrows the selection range and allows you to apply one of the various methods for transferring the selection(s) to the Selected Components list. Filtering options for electrolytes and hypotheticals are different and available in Section 1.2.4 - Adding Electrolyte Components and Section 1.2.5 - Adding Hypothetical Components, respectively. There are four tools available for filtering the list in the Components Available in the Component Library group. The filtering tools can be used independently or in combination and are described in the table below: Filtering Tool Description Property Package & Family Type Filters Filters the list according to your selection of property package and/or component families. Show Synonyms Component synonyms appear alphabetically throughout the list when this checkbox is selected. Cluster The Cluster checkbox is available only when the Show Synonyms checkbox is selected and Match input field is empty. By selecting the Cluster checkbox, all synonyms are indented and listed below the component name. Match This input cell allows type-matching of the component simulation name, full name, synonym or formula. Refer to previous Filter Options for Traditional Components for further details.
- 25. 1-10 Component List Property View 1-10 When trying to Match a component, HYSYS searches the component column in the list for whichever radio button is selected: By using the Match input cell, you can access any component within the HYSYS library that is accessible under the currently selected Property Package. You can make the Match field active by selecting it or by using the ALT M hot key. The Match input cell accepts keyboard input, and is used by HYSYS to locate the component in the current list which best matches your input. The first character of the filtered component names must agree with first character of the listed component name. Subsequent characters in the Match cell must appear somewhere in each listed component name. Other than the first character, any number of unmatched characters can appear within the names of the listed components. Radio Button Description SimName This option matches the text entered into the Match input to the name used within the simulation. Full Name/ Synonym This option may match the components full name or a synonym of the SimName. It is typically a longer name. Formula Use this option when you are not sure of the library name, but know the formula of the component.
- 26. Components 1-11 1-11 If the component you want to add is Water, type H2 in the Match cell. HYSYS filters the list of available Library Components to only those that match your current input string. The first component in the list, H2, is an exact match of your current input and therefore, is highlighted. Notice that H2O is available in the list even though you have entered only H2. Since Hydrogen is not the component of choice, you can continue to reduce the list of available library component options by typing in the character O after the H2 in the Match cell. Figure 1.6
- 27. 1-12 Component List Property View 1-12 Filter Options for Traditional Components The floating Filter property view is accessed by clicking the View Filters button from Component List property view. It allows access to the Property Package filter and Family Type filter options. The Property Package Filter group filters components based on their compatibility with the selected property package. Once a property package is selected, the Recommended Only checkbox works as follows: • If the Recommended Only checkbox is selected, HYSYS only displays (in the component library list) components that are recommended with the chosen property package. • If the Recommended Only checkbox remains un- selected, all the components in the HYSYS library are displayed in the component library list. An ‘x’ is shown beside each component that HYSYS does not recommend for the selected property package, however, you may still select these components if you want. The Family Type Filter group allows HYSYS to filter the list of available components to only those belonging to a specific family. The Use Filter checkbox, when selected, toggles the Family Type Filter options On and Off. By default, all checkboxes in the Family Filter group are cleared. You can identify which families should be included in the list of available components by selecting the desired checkbox(es). The All button selects all checkboxes, and the Invert button toggles the status of each checkbox individually. For example, if you select all of the checkboxes, and then want to quickly clear them, simply click the Invert button. If you only had the Hydrocarbons and the Solids options activated and you clicked the Invert button, these two options are deactivated and the remaining options are activated. The Property Package Filter is only a component selection filtering tool and does not associate a Fluid Package with the component list (this is accomplished within the Fluid Package Manager).
- 28. Components 1-13 1-13 Selecting the Component(s) After the list of Library Components are filtered, you can see the desired component among the displayed components. Use one of the following available methods to highlight the component(s) of choice described in the following table: Whenever the list of components is filtered, the highlight is placed on the first component in the reduced list. If you use the keyboard commands to access the list of components, you may have to move the highlight if the first component is not desired. To move through the Components Available in the Component Library group, use one of the following methods: Transferring the Component(s) After the Library Component list is filtered and the desired component(s) highlighted, transfer the selection(s) to the Selected Components list. Use one of the following methods: • Click the Add Pure button • Press the ENTER key • Double-click on the highlighted item. This option only works for a single component selection. Selection Method Description Mouse Place the cursor over the desired component and press the primary mouse button. Keyboard Use the TAB key or SHIFT TAB combination to move the active location into the list of components. Method Description Arrow Keys Move the highlight up or down one line in the component list. Page Up/Page Down Use these keyboard keys to move through the list an entire page at a time. Home/End The HOME key moves to the start of the list and the END key moves to the end of the list. Scroll Bar With the mouse, use the scroll bar to navigate through the list.
- 29. 1-14 Component List Property View 1-14 The methods are the same whether you are adding traditional components, electrolytes, hypotheticals, or other components. 1.2.3 Manipulating the Selected Components List After adding the components to the Selected Components list, you can substitute, remove, sort, and view components. These methods apply to traditional library components, electrolytes, hypotheticals, and other components. To demonstrate the manipulation functions, the Selected Components group shown below is used for reference purposes. Removing Selected Components You can remove any component(s) from the Selected Components list by the following steps: 1. Highlight the component(s) you want to delete. 2. Click the Remove button, or press the DELETE key. For Library components, HYSYS removes the component(s) from the Selected Components list and places back in the Components Available in the Component Library list. Since Hypothetical components are shared among Fluid Packages, Figure 1.7 Refer to Chapter 3 - Hypotheticals for detailed information on Hypothetical components.
- 30. Components 1-15 1-15 there is no actual transfer between the lists. (i.e., The Hypo always appears in the Available group, even when it is listed in the selected Components list.) Substituting Components When substituting components, HYSYS replaces the component throughout the case (i.e., all specifications for the old component are transferred to the new component). However, the substitution function does not automatically handle components which are part of a Reaction. You can substitute a component in the selected Component List with one in the Components Available in the Component Library list by using the following procedure: 1. From the selected Component List, highlight the component you want to remove. 2. In the Available Component list, highlight the component to be substituted. 3. Click the Substitute button. 4. The removed component is returned to the Available Component list and the substituted component is placed in the Selected Component List. You can only substitute one component at a time. Even though HYSYS allows you to highlight multiple components, the substitution only involves the first highlighted component.
- 31. 1-16 Component List Property View 1-16 Sorting a Component List When there are components in the Selected Components group you can use the Sort List button to rearrange the component order. Using the property view shown in Figure 1.8, the sorting procedure is illustrated below: 1. Click the Sort List button, and the Move Components property view appears. 2. From the Component(s) to Move group, select the component you want to move. In this example, Methane is selected. 3. From the Insert Before group, highlight the component before which Methane is to be inserted. In this case, Propane is highlighted. 4. Click the Move button to complete the move. Methane is inserted before Propane in the component list, and Ethane is forced to the top of the list, followed by Methane, Propane, and n-Butane. You can select and highlight multiple components for moving. 5. When you have completed the sorting, click the Close button to return to the Components tab. Figure 1.8
- 32. Components 1-17 1-17 Viewing Components Once a component is added to the Selected Components list, the View Component button becomes active. The View Component button accesses the Pure Component property view allowing you to view and edit properties of the specified component. The property views are different and are specific to the type of component selected. Pure library components and hypothetical components share the first type of property view. The difference between the two is that you cannot “directly” modify the properties in the pure components Property View, whereas, in the hypotheticals you can. The Edit Properties feature allows you to edit pure component and solid properties. The second property view is shared by pure component solids and hypothetical solids. Again you cannot “directly” modify the pure component solid properties, whereas, hypotheticals can be edited directly. The electrolytes property view is the same as the edit properties feature for library components. Although, the electrolyte properties are set by OLI systems and cannot be modified like traditional components. Each property view consists of five tabs. Throughout the tabs the information is displayed in red, blue and black. Values displayed in red are estimated by HYSYS. Values displayed in blue are user supplied. Black values represent calculated values or information that is provided by HYSYS. You can also examine the property view for any component in the Selected Component List by double-clicking on the component. For more information on hypotheticals, refer to Chapter 3 - Hypotheticals. For more information on electrolytes, refer to Section 1.2.4 - Adding Electrolyte Components.
- 33. 1-18 Component List Property View 1-18 Pure Component Property View In this example, Methane and Carbon are used by clicking the View Component button, which opens the following traditional pure component and Solid pure component property views, respectively: ID Tab The ID tab is the first tab in the property view. The black values in the Component Identification group represent information that is provided by HYSYS. The User ID Tags are used to identify your component by a user specified tag number. You can assign multiple tag numbers to each component. Figure 1.9 You can also view a component by right-clicking on the component and selecting View command from the object inspect menu.
- 34. Components 1-19 1-19 Critical Tab & Props Tab The Critical Tab displays Base and Critical Properties. The properties for pure components are supplied by HYSYS and are read-only. However, you can edit these properties using the Edit Properties button. The Component Property view for solid components does not have critical properties and therefore does not require the Critical tab. An alternate tab called the Props tab which displays default values for Solid properties and Coal Analysis is included. These properties can also be edited using the Edit Properties button. Point Tab Additional Point properties are given by HYSYS for the Thermodynamic and Physical Props and the Property Package Molecular Props. The pure component properties differ from the solid properties. The solid properties depend only on the Heat of Formation and Combustion. These properties may be altered by selecting Point properties in the Edit Properties property view. TDep Tab The temperature Dependent Properties for pure components are shown in this tab. HYSYS provides the minimum temperature, maximum temperature and coefficients for each of the three calculation methods. The difference between pure components and solid pure components is that solids do not participate in VLE calculations. Their vapour pressure information is, by default, set to zero. However, since solid components do affect Heat Balances, the Specific Heat information is used. The properties may be edited by selecting the Edit Properties button.
- 35. 1-20 Component List Property View 1-20 UserProp & PSD Tabs The UserProp tab displays user specified properties. User properties must be specified on the UserProperty tab in the Simulation Basis Manager property view. Once a user property is specified there, you can view and edit UserProp on this component property view. The PSD tab displays the particle size distribution for solids. It allows the user to specify PSDs and calculate various mean and modal diameters for the entered PSD. To edit a PSD, click the Edit Properties button to open the Editing Properties for Component property view, select Type radio button in the Sort By group, and select Particle Size Distribution from the tree browser. The options available for edit the PSD appears on the right side of the Editing Properties for Component property view. Figure 1.10 See Chapter 7 - User Properties for more information.
- 36. Components 1-21 1-21 A PSD can be specified in three ways: The input information required for each Input PSD are as follows: The user has the choice between using the User-Defined Discrete or one of the statistical distribution methods. The statistical methods (Log Probability & Rosin-Rammler) may be preferred over the discrete method if any of the following occurs: • A number of particle size measurement devices give the distribution as a statistical fit. • Certain physical process tend to give rise to distributions that are described well by a statistical distribution. For example, processes involving high shear (e.g. crushing Input PSD Group Description User-Defined Discrete Allows the user to enter particle diameter vs distribution values over the range of the distribution. To enter the distribution, Select the Edit Discrete PSD button. The entered distribution can be a Composition Basis with mass percent or number percent data and can be InSize, cumulative Undersize or cumulative Oversize as an Input Basis. Once a discretized PSD is entered, the user can have other types of PSD fitted to it. These fits are displayed in the Fit Type group. The selected fit can be changed by regenerating the fit at any time. Log-probability Is a two-parameter statistical representation which allows the user to specify the mean and standard deviation of the PSD. Rosin-Rammler Is a two-parameter statistical representation which allows the user to specify the Rosin-Rammler model diameter and spread parameter of the PSD. Input PSD Group Input Information Required User-Defined Discrete The PSD requires PSD name, basis, particle density and number of points to use in fitted PSDs. The distribution requires particle diameters (including minimum diameter) and either InSize, Undersize or Oversize distribution points. Log-probability The PSD requires PSD name, basis, particle density and number of points to use in generating the PSD. The distribution requires mean diameter and standard deviation. Rosin-Rammler The PSD requires PSD name, basis, particle density and number of points to use in generating the PSD. The distribution requires modal diameter and spread parameter.
- 37. 1-22 Component List Property View 1-22 of coal, atomization of liquids in a two-fluid nozzle) tend to give size distributions that can be readily described by a Rosin-Rammler distribution. • By using a statistical distribution, it is easier to extend the distribution to lower and higher size ranges. For many design processes involving size distributions, it is the values of the distribution at these 'tails' that have most influence when trying to optimize the design. Therefore, the accuracy with which these 'tails' can be described is important. The Fit Type group for the User-Defined Discrete Input allows users to fit a distribution to the entered discrete data. The fitting improves the accuracy of any calculations made by it. • It increases the number of discrete steps over which a size distribution can be described. The more steps, mean smaller steps which means more accuracy when interpolating, etc. • It provides more data at the extremes (‘tails’) of the distribution, again improving accuracy. The fit type used is based on which provides the closest fit to the data. The fitting alogorithm displays a dialog with six fits to the data. The AutoFit selects one fit for the data automatically, and the NoFit does not fit the data. The Standard and Probability fit types are lagrangian interpolations on the entered data, but one works on the raw data while one works on a probability transformation of the data. That is, the distribution values are transformed to the linear equivalents used in plotting against a probability axis. The other two fits are a log-probability and a Rosin-Rammler distribution. For these two fits, the value of R2 (the fit coefficient) is given and the closer this is to 1 the better the fit. Ultimately, it is up to the user to choose the best fit and is often based on the visual appearance of the fitted distibutions compared to the entered one. One limitation to PSD is that the particle diameters cannot be specified as sieve mesh sizes.
- 38. Components 1-23 1-23 Edit Properties The Edit Properties button allows the user the flexibility of viewing and modifying properties for traditional and hypothetical components. Electrolyte component properties are specified by OLI Systems which may only be viewed. The Edit Properties property view can be accessed on three different levels and are shown below: • Component level. Double-click on any component or right-click and select View in the object inspect menu. Click the Edit Properties button. • Fluid Package level. Click the Edit Properties button on the Fluid Package property view. • Stream level. Select a stream which is not a product stream. Click the Edit Properties button on the Composition page. The Component level Edit Properties property view is shown below for methane. Figure 1.11
- 39. 1-24 Component List Property View 1-24 The properties can be sorted using the Sort By group on any level. The edit Properties feature is flexible in that it allows you to edit properties on the component, fluid package, or stream levels. The component level is the highest and allows you to edit properties throughout your case. Any changes at this level correspond to a global change to all fluid packages using the particular component. The initial value stored at this level for any given component is considered the 'default' property value. At the component level, the reset options are described below. The second level is the fluid package level which allows you to edit properties specific to a fluid package. This allows the flexibility of having different property values for different fluid packages throughout the case. Any changes at this level corresponds to a change for any flowsheet using this fluid package. Sort By Description Property Name Sort through properties by Property Name. Group Sort through properties by Groups. This includes Thermo, Prop Pkg, Physical, Cold, Solid, etc. Type Sort through Point, Curve, Distribute, PSD, and Hydrate properties. Modify Status Sort through properties which are modified in the specific Component, Fluid Pkg, or Stream. Component Level Reset Description Reset selected property to library default Resets the selected property to the library or original default value for this component. This button is active only if a component is modified on the component level. Reset all properties to library default Resets all properties to library or original default values for this component. This button is active only if a component is modified on the component level. Reset selected property for all users of this component Clears local changes to the selected property for all users of this component. Users are defined by changes in the Fluid pkg and stream levels. Reset all properties for all users of this component Clears local changes to all properties for all users of this component. Users are defined by changes in the Fluid pkg and stream levels.
- 40. Components 1-25 1-25 The reset options for the fluid pkg level are described below: The stream level allows you to edit properties specific to input streams of the case. Changes made at this level enable one to modify a particular component's property for a particular stream. This allows the flexibility of properties to dynamically change across the flowsheet. The reset options are listed below and are active if you modify a property value at the stream level. The properties for the stream are accessible from the stream level editor. However, only the feed stream properties are modifiable. Keep in mind that any property vector changes at the Stream level supercede changes at the fluid package level. For example, if a stream is trying to access a particular component's 'Point' property value and the property vector is contained in the stream's local property slate, the local value is used. If the property vector does not exist locally, then it calls up to the fluid package's property state for the particular property vector and Fluid Pkg Level Reset Description Reset selected prop vector to components default Clears the selected property vector within this fluid package and resets it to the component level value. Reset all props to components default Clears all changed property vectors within this fluid package and resets them to the component level values. Reset selected property for all users of this fp Clears local changes to selected property vector for all users of this fluid package. The user is defined as the stream level property selected, which is overwritten with current fluid package value. Reset all properties for all users of this fp Clears local changes to all properties for all users of this fluid package. The users are defined as the stream level properties, which are overwritten with current fluid package values. Stream Level Reset Description Reset Selected Prop Vector to FP Default Clears selected property vector and reset it to the fluid package level value for this stream. Reset All Props to FP Default Clears all changed property vectors and reset them to the fluid package values for this stream.
- 41. 1-26 Component List Property View 1-26 uses this value if it exists. If the property vector does not exist at the fluid package level, then the initial Component level value is used. 1.2.4 Adding Electrolyte Components Electrolytes can be added to the component list in the Component List property view. In the Add Component group of the Selected tab, select the Electrolyte page located as the subgroup of the Components configuration. The property view is filled with information on electrolytes as shown below. Figure 1.12
- 42. Components 1-27 1-27 The methods for adding, substituting, removing, and sorting components are common for all components on the selected tab. The filtering options for Electrolytes which are described in the following table: You can select or provide additional electrolyte component databases to simulate special aqueous-based chemical systems. HYSYS supports three special databases: GEOCHEM, LOWTEMP, and REDOX. You can access those special databases by clicking on the Additional Database button, and select the desired special databases from the Special Databank group in the OLI_Electrolyte Additional Database property view. The use of GEOCHEM, LOWTEMP, and REDOX databases must combine with the choice of Full Databank. You can also supply your own OLI private databank to suit the need of your simulation case. To get a comprehensive list of the Full, and GEOCHEM database components, refer to: • Appendix A.1 - List of Full HYSYS OLI Interface Database, of the HYSYS OLI Interface Reference Guide. • Appendix B.1 - List of HYSYS OLI Interface GEOCHEM Database, of the HYSYS OLI Interface Reference Guide. Filter Description Match This input cell allows type-matching of the component simulation name, full name / synonym, or formula based on the ratio button selected. None No electrolyte components exist or match your selection in the property view. You need to acquire an additional license to view the electrolyte database. Full The full database contains thousands of species in water based on the OLI system database. Limited This database contains approximately 1,000 components which are of most interest to process industries. Refer to Filtering the Component List for Traditional Components for additional information on using the Match field to filter the component list for traditional components. Refer to the following sections in the HYSYS OLI Interface Reference Guide for more information on the OLI databases: • Section 1.8.1 - Full Database • Section 1.8.2 - Limited Database • Section 1.8.3 - Special Databases • Section 1.8.4 - Private User Databases - OLI Data Service
- 43. 1-28 Component List Property View 1-28 1.2.5 Adding Hypothetical Components Hypotheticals can be added to a component list through the Components List property view. In the Add Components group of the Selected tab, select the Hypothetical branch from the tree browser. The Components List property view is filled with information appropriate to the addition of Hypothetical components. Some of the features from the Selected tab are common to both the selection of Hypotheticals and Library components. Items specific to Hypotheticals are described in the following table: Refer to Section 3.5 - Hypothetical Component Property View for details on the various Component property view tabs. Figure 1.13 Object Description Add Group Adds all the Hypothetical components in the Selected selection in the Hypo Group list current to the current component list. Add Hypo Adds the currently selected Hypothetical in the Hypo Component list to the Current Component List. Hypo Group Displays all the Hypo Groups available to the current component list. Refer to Chapter 3 - Hypotheticals for more detailed information to Add and modify Hypothetical components.
- 44. Components 1-29 1-29 Hypo Components Displays all the Hypothetical components contained in the currently selected Hypo Group. Hypo Manager Accesses the Hypotheticals tab of the Simulation Basis Manager, from which you can create, view, or edit Hypotheticals. Quick Create a Hypo Comp A short-cut for creating a regular Hypothetical component and adds it to the currently selected Hypo Group and opens its property view. Quick Create a Solid Hypo component A short-cut for creating a solid Hypothetical component and adds it to the currently selected Hypo Group and opens its property view. While you can add Hypos to a Component List from the Selected tab, this is merely a short-cut. To access all features during the creation of Hypotheticals and Hypothetical groups, you should access the Hypotheticals tab of the Simulation Basis Manager. Object Description
- 45. 1-30 Component List Property View 1-30 1.2.6 Adding Components from Existing Component Lists Components can be added from other component lists by using the Other List option. In the Add Components group, select the Other list. The Components tab is redrawn with information appropriate to accessing components from alternate component lists. The Existing Components group displays a list of all available component lists loaded into the current case. Highlighting a component list name displays its associated group of components in the Components in Selected Component List. To transfer a component from an existing component list, simply highlight the component name in the list and click the Add button. The highlighted component is added to the Selected Components list. Figure 1.14
- 46. Fluid Package 2-1 2-1 2 Fluid Package 2.1 Introduction................................................................................... 2 2.2 Fluid Packages Tab ........................................................................ 3 2.3 Adding a Fluid Package - Example.................................................. 5 2.4 HYSYS Fluid Package Property View .............................................. 7 2.4.1 Set Up Tab .............................................................................. 8 2.4.2 Parameters Tab...................................................................... 28 2.4.3 Binary Coefficients Tab............................................................ 41 2.4.4 Stability Test Tab.................................................................... 50 2.4.5 Phase Order Tab..................................................................... 55 2.4.6 Reactions Tab ........................................................................ 57 2.4.7 Tabular Tab............................................................................ 58 2.4.8 Notes Tab.............................................................................. 83 2.5 COMThermo Property View .......................................................... 84 2.5.1 Set Up Tab ............................................................................ 85 2.5.2 Parameters Tab...................................................................... 98 2.5.3 Binary Coefficients Tab...........................................................100 2.5.4 Stability Test Tab...................................................................105 2.5.5 Reactions Tab .......................................................................109 2.5.6 Notes Tab.............................................................................109 2.6 References................................................................................. 109
- 47. 2-2 Introduction 2-2 2.1 Introduction In HYSYS, all necessary information pertaining to pure component flash and physical property calculations is contained within the Fluid Package. This approach allows you to define all the required information inside a single entity. The four key advantages to this approach are: • All associated information is defined in a single location, allowing for easy creation and modification of the information. • Fluid Packages can be exported and imported as completely defined packages for use in any simulation. • Fluid Packages can be cloned, which simplifies the task of making small changes to a complex Fluid Package. • Multiple Fluid Packages can be used in the same simulation; however, they are all defined inside the common Simulation Basis Manager. In this chapter, all information concerning the fluid package is covered. This includes the basic procedure for creating a fluid package by using both traditional HYSYS and COMThermo thermodynamics. Finally, information on the Fluid Package property view is provided for each of the following tabs: • Set Up • Parameters • Binary Coefficients • Stability Test • Phase Order • Reactions (Rxns) • Tabular • Notes It should be noted that individual components are not added within the Fluid Package Manager. Instead, component selection is handled independently in the Basis Manager through the Components tab. The Components Manager provides a general location where sets of chemical components being modeled may be retrieved and manipulated. Refer to Chapter 1 - Components for further details on the Components Manager.
- 48. Fluid Package 2-3 2-3 2.2 Fluid Packages Tab The next tab of the Simulation Basis Manager property view is the Fluid Packages (Fluid Pkgs) tab. When you create a New Case, HYSYS displays the Fluid Pkgs tab, as shown below: In the Current Fluid Packages group, there are buttons that allow you to organize all Fluid Packages for the current case. The following table lists and describes each button: Figure 2.1 You must define at least one fluid package prior to entering the Simulation Environment. When a New Case is created, only the Add and Import buttons are available. Button Description View This is only active when a fluid package exists in the case. It allows you access the property view for the selected fluid package. Add Allows you to install a new fluid package into the case. Refer to Section 2.4 - HYSYS Fluid Package Property View for details on what information you can edit by clicking the View button.
- 49. 2-4 Fluid Packages Tab 2-4 The Flowsheet - Fluid Pkg Associations group lists each Flowsheet in the current simulation along with its associated Fluid Package. You can change the associations between Flowsheets and which Fluid Pkg To Use in this location. You can also specify a default fluid package by selecting a package in the Default Fluid Pkg drop-down list. HYSYS automatically assigns the Default Fluid Package to each unit operation, SubFlowsheet or columns using the default fluid package in the simulation. Selecting a alternative fluid package from the Basis Manager property view allows you to transition or switch between fluid pkgs anywhere in the flowsheet with the addition of the stream cutter object. The Fluid Pkg for New Sub-FlowSheets group allows you to select the default fluid package that is associated to a subflowsheet, when the subflowsheet is created. • Use Default Fluid Pkg radio button associates the default fluid package of the entire simulation case to the subflowsheet. • Use Parent’s Fluid Pkg radio button associates the default fluid package of the parent flowsheet to the subflowsheet. Delete Allows you to delete a fluid package from the case. When you delete a fluid package, HYSYS displays a warning, and asks you to verify that you want to delete the package. You must have at least one fluid package for your case at all times. Copy Makes a copy of the selected fluid package. Everything is identical in this copied version, except the name. This is a useful tool for modifying fluid packages. Import Allows you to import a pre-defined fluid package from disk. Fluid packages have the file extension *.fpk. Export Allows you to export the selected fluid package (*.fpk) to disk. The exported fluid package can be retrieved into another case, by using its Import function. Changing the default package only changes those fluid pkgs that are currently set to use the default fluid package. That is, any operation or stream which is not set to the default fluid package is not modified. Button Description For details concerning the importing and exporting functionality, refer to Section 7.23.7 - Exporting/ Importing Workbook Tabs in the HYSYS User Guide. Refer to Chapter 5 - Logical Operations in the HYSYS Operations Guide for detailed information on the stream cutter object and fluid package transitioning.
- 50. Fluid Package 2-5 2-5 2.3 Adding a Fluid Package - Example When you click the Add button from the Simulation Basis Manager property view, HYSYS opens the Fluid Package property view to the Set Up tab. The Fluid Package property view is based on the traditional HYSYS Thermodynamics. The order of the tabs in the Fluid Package property view are tied to the sequence of defining a Fluid Package using HYSYS thermodynamics. • On the Set Up tab, select a Property Package for the case from the Property Package Selection group. You can filter the list of Property Packages by selecting a radio button in the Property Package Filter group. You must also select a Component List for the case from the Component List Selection group. Component Lists are built in the Simulation Basis Manager and may contain library, hypothetical, and electrolyte components. • Depending on the Property Package selected, you may need to specify additional information, such as the Enthalpy and Vapour Model, Poynting Correction factor, etc. Figure 2.2 You can select the COMThermo checkbox to access the COMThermo option in HYSYS. A complete description of each page of the Fluid Package property view is given in Section 2.4 - HYSYS Fluid Package Property View. For further details relating to Component Lists and component selection, refer to Chapter 1 - Components.
- 51. 2-6 Adding a Fluid Package - Example 2-6 • Depending on the Property Package selected you may need to supply additional information based on the selected components. This is done on the Parameters tab. • If necessary, specify the binary coefficients on the Binary Coeffs tab. As an alternative to supplying binaries, you may want to have estimates made for the selected components. • If necessary, instruct HYSYS how to perform Phase Stability tests as part of the flash calculations on the Stab Test tab. • Define any reactions and reaction sets for the fluid package or access the Reaction Manager on the Rxns tab. • On the Tabular tab, you can access the Tabular Package for the equation based representation of targeted properties. • The final tab on the Fluid Package property view is the Notes tab, where you can supply descriptive notes for the new Fluid Package. If you click the COMThermo checkbox in the Advanced Thermodynamics group, HYSYS opens the Fluid package property view to the Set Up tab. The Fluid Package property view is based on the COMThermodynamics framework. The order of the tabs in the Fluid Package property view are similar to the traditional HYSYS Thermodynamics as above except for the following: • On the Set Up tab, select a model case from the Model Selection group for the vapor and liquid phase. Figure 2.3 Refer to Chapter 5 - Reactions for information on the Reaction Manager.
- 52. Fluid Package 2-7 2-7 • Depending on the model selected, you may specify additional information. For example, in the Model Options group select the calculation methods for Enthalpy and Entropy, Cp, etc., using the drop-down list. • Depending on the Model selected, you may need to supply additional information based on the selected components. This is done on the Parameters tab. • If necessary, specify the binary coefficients on the Binary Coeff tab. As an alternative to supplying binaries, you may want to have estimates made for the selected components. • If necessary, instruct HYSYS-COMThermo how to perform Phase Stability tests as part of the flash calculations on the Stab Test tab. 2.4 HYSYS Fluid Package Property View The Fluid Package property view consists of eight tabs and is based on the traditional HYSYS thermodynamics. Among these tabs is all the information pertaining to the particular Fluid Package. Figure 2.4 Removes the Fluid Package from the case. You must confirm that you want to delete the Fluid Package You can input a name for the Fluid Package in this field. The selected base Property Package type is shown in this status bar. Select the button to edit properties at the fluid package level.
- 53. 2-8 HYSYS Fluid Package Property View 2-8 2.4.1 Set Up Tab The Set Up tab is the first tab of the Fluid Package property view. When you create a new Fluid Package, the Fluid Package property view appears as shown in the above figure. The Set Up tab contains the Property Package Selection, Component List Selection, Property Package Filter and Thermodynamics groups. Once a Property Package is selected, additional information and options may be displayed to the right of the Property Package Selection group. This is shown in Figure 2.4 with the EOS Enthalpy Method Specification group for the Peng-Robinson property package. The information that is displayed is dependent on the selected Property Package. The following sections provide an overview of the various Property Packages, as well as details on the various groups that appear on the Set Up tab. Figure 2.5 Refer to Section 2.5 - COMThermo Property View for more information on Advanced Thermodynamics group. Additional information are displayed in this space depending on the Property Package selection. Select a Component List here. It is not recommended to use the Master Component List. Select a property package for the fluid package using the property package filter.
- 54. Fluid Package 2-9 2-9 Property Package Selection Group In the Property Package Selection group, you have access to the list of all the Property Package/Property Methods available in HYSYS and to the Property Package Filter group. The Property Package Filter allows you to filter the list of available property methods, based on the following criteria: Equations of State (EOS) For oil, gas and petrochemical applications, the Peng-Robinson Equation of State is generally the recommended property package. Enhancements to this equation of state enable its accuracy for a variety of systems over a wide range of conditions. It rigorously solves most single-phase, two-phase, and three-phase systems with a high degree of efficiency and reliability. Figure 2.6 Filter Description All Types All the Property Packages appear in the list. EOSs Only Equations of State appear in the list. Activity Models Only Liquid Activity Models appear in the list. Chao Seader Models Only Chao Seader based Semi Empirical methods are displayed. Vapour Pressure Models Vapour pressure K-value models are shown in the list. Miscellaneous Models that do not fit into any of the above 4 categories (i.e., excluding All) are displayed. For more detailed information about the property packages available in HYSYS, refer to Appendix A - Property Methods & Calculations.
- 55. 2-10 HYSYS Fluid Package Property View 2-10 All equation of state methods and their specific applications are described below: Activity Models Although Equation of State models have proven to be very reliable in predicting the properties of most hydrocarbon based fluids over a wide range of operating conditions, their application is limited to primarily non-polar or slightly polar components. Highly non-ideal systems are best modeled using Activity Models. EOS Description GCEOS This model allows you to define and implement your own generalized cubic equation of state including mixing rules and volume translation. Kabadi Danner This model is a modification of the original SRK equation of state, enhanced to improve the vapour-liquid-liquid equilibria calculations for water-hydrocarbon systems, particularly in dilute regions. Lee-Kesler Plocker This model is the most accurate general method for non- polar substances and mixtures. Peng-Robinson This model is ideal for VLE calculations as well as calculating liquid densities for hydrocarbon systems. Several enhancements to the original PR model were made to extend its range of applicability and to improve its predictions for some non-ideal systems. However, in situations where highly non-ideal systems are encountered, the use of Activity Models is recommended. PRSV This is a two-fold modification of the PR equation of state that extends the application of the original PR method for moderately non-ideal systems. SRK In many cases it provides comparable results to PR, but its range of application is significantly more limited. This method is not as reliable for non-ideal systems. Sour PR Combines the PR equation of state and Wilson's API-Sour Model for handling sour water systems. Sour SRK Combines the Soave Redlich Kwong and Wilson's API- Sour Model. Zudkevitch Joffee Modification of the Redlich Kwong equation of state. This model has been enhanced for better prediction of vapour-liquid equilibria for hydrocarbon systems, and systems containing Hydrogen. BWRS This model is commonly used for compression applications and studies. It is specifically used for gas phase components that handle the complex thermodynamics that occur duirng compression and is useful in both upstream and downstream industries.
- 56. Fluid Package 2-11 2-11 The following Activity Model Property Packages are available: Activity Model Description Chien Null Provides a consistent framework for applying existing Activity Models on a binary by binary basis. It allows you to select the best Activity Model for each pair in your case. Extended NRTL This variation of the NRTL model allows you to input values for the Aij, Bij, Cij, Alp1ij and Alp2ij parameters used in defining the component activity coefficients. Apply this model to systems: • with a wide boiling point range between components. • where you require simultaneous solution of VLE and LLE, and there exists a wide boiling point range or concentration range between components. General NRTL This variation of the NRTL model allows you to select the equation format for equation parameters: and . Apply this model to systems: • with a wide boiling point range between components. • where you require simultaneous solution of VLE and LLE, and there exists a wide boiling point or concentration range between components. Margules This was the first Gibbs excess energy representation developed. The equation does not have any theoretical basis, but is useful for quick estimates and data interpolation. NRTL This is an extension of the Wilson equation. It uses statistical mechanics and the liquid cell theory to represent the liquid structure. It is capable of representing VLE, LLE, and VLLE phase behaviour. UNIQUAC Uses statistical mechanics and the quasi-chemical theory of Guggenheim to represent the liquid structure. The equation is capable of representing LLE, VLE, and VLLE with accuracy comparable to the NRTL equation, but without the need for a non-randomness factor. van Laar This equation fits many systems quite well, particularly for LLE component distributions. It can be used for systems that exhibit positive or negative deviations from Raoult's Law, however, it cannot predict maxima or minima in the activity coefficient. Therefore it generally performs poorly for systems with halogenated hydrocarbons and alcohols. Wilson First activity coefficient equation to use the local composition model to derive the Gibbs Excess energy expression. It offers a thermodynamically consistent approach to predicting multi-component behaviour from regressed binary equilibrium data. However the Wilson model cannot be used for systems with two liquid phases. τ α
- 57. 2-12 HYSYS Fluid Package Property View 2-12 Chao Seader & Grayson Streed Models The Chao Seader and Grayson Streed methods are older, semi- empirical methods. The Grayson Streed correlation is an extension of the Chao Seader method with special emphasis on hydrogen. Only the equilibrium data produced by these correlations is used by HYSYS. The Lee-Kesler method is used for liquid and vapour enthalpies and entropies. Vapour Pressure Models Vapour Pressure K-value models may be used for ideal mixtures at low pressures. Ideal mixtures include hydrocarbon systems and mixtures such as ketones and alcohols, where the liquid phase behaviour is approximately ideal. The models may also be used as first approximations for non-ideal systems. The following vapour pressure models are available: Model Description Chao Seader Use this method for heavy hydrocarbons, where the pressure is less than 10342 kPa (1500 psia), and temperatures range between -17.78 and 260°C (0-500°F). Grayson Streed Recommended for simulating heavy hydrocarbon systems with a high hydrogen content. Models Description Antoine This model is applicable for low pressure systems that behave ideally. Braun K10 This model is strictly applicable to heavy hydrocarbon systems at low pressures. The model employs the Braun convergence pressure method, where, given the normal boiling point of a component, the K-value is calculated at system temperature and 10 psia (68.95 kPa). Esso Tabular This model is strictly applicable to hydrocarbon systems at low pressures. The model employs a modification of the Maxwell-Bonnel vapour pressure model.
- 58. Fluid Package 2-13 2-13 Miscellaneous Types The Miscellaneous group contains Property Packages that are unique and do not fit into the groups previously mentioned. Additional Property Package Options When you select a Property Package, additional information and options may be displayed on the right side of the Set Up tab. This information is directly related to the Property Package type selected. Property Package Description Amine Pkg Contains thermodynamic models developed by D.B. Robinson & Associates for their proprietary amine plant simulator, AMSIM. You can use this property package for amine plant simulations with HYSYS. Amines is an optional Property Package. Contact your AspenTech representative for further information. ASME Steam Restricted to a single component, namely H2O. Uses the ASME 1967 Steam Tables. Glycol PPkg Glycol property package contains the TST (Twu- Sim-Tassone) equation of state to determine the phase behaviour more accurately and consistently for the TEG-water mixture. NBS Steam Restricted to a single component, namely H2O. Utilizes the NBS 1984 Steam Tables. MBWR This is a modified version of the original Benedict/ Webb/Rubin equation. This 32-term equation of state model is applicable for only a specific set of components and operating conditions. OLI_Electrolyte Developed by OLI Systems Inc. and used for predicting the equilibrium properties of a chemical system including phase and reactions in a water solution. For more information on the package see Appendix C - Amines Property Package. For more information on the package see Appendix D - Glycol Property Package. For more information on the OLI_Electrolyte property package, refer to Section 1.6 - HYSYS OLI_Electrolyte Property Package in the HYSYS OLI Interface Reference Guide.
- 59. 2-14 HYSYS Fluid Package Property View 2-14 In this section, the additional information displayed with the property method selection is discussed. The groups that are encountered are shown below. It should be noted that not all EOS’s or Activity models include the specifications indicated. EOS Enthalpy Method Specification The Lee-Kesler Plocker (LKP) and Zudkevitch Joffee (ZJ) property packages both use the Lee-Kesler enthalpy method. You cannot change the enthalpy method for either of these Equations of State (in other words, the figure below does not appear). Property Packages Specifications and Options Equation of States EOS Enthalpy Method Specification, Peng Robinson Options, Indexed Viscosity Mixing Rule, EOS Density and Smooth Liquid Density Specifications Activity Models Activity Model Specifications Amine Pkg Amine Options: • Thermodynamic Models for Aqueous Amine Solutions • Vapour Phase Model OLI_Electrolyte OLI_Electrolyte Options: • Initialize and View Electrolytes • Phase and Solid options Figure 2.7
- 60. Fluid Package 2-15 2-15 With any other Equation of State, you have a choice for the enthalpy method as described below: Peng Robinson Options The Peng Robinson options are only available when the Peng Robinson property package is selected. The options are explained in the table below: Enthalpy Method Description Equation of State With this radio button selection, the enthalpy method contained within the Equation of State is used. Lee-Kesler The Lee-Kesler method is used for the calculation of enthalpies. This option results in a combined Property Package, employing the appropriate equation of state for vapour-liquid equilibrium calculations and the Lee- Kesler equation for the calculation of enthalpies and entropies. This method yields comparable results to HYSYS' standard equations of state and has identical ranges of applicability. Lee-Kesler enthalpies may be slightly more accurate for heavy hydrocarbon systems, but require more computer resources because a separate model must be solved. Figure 2.8 Option Description HYSYS The HysysPR EOS is similar to the PR EOS with several enhancements to the original PR equation. It extends its range of applicability and better represents the VLE of complex systems. Standard This is the standard Peng Robinson (1976) equation of state, a modification of the RK equation to better represent the VLE of natural gas systems accurately. For more information on property packages, refer to Appendix A.3.1 - Equations of State.
- 61. 2-16 HYSYS Fluid Package Property View 2-16 EOS Density and Smooth Liquid Density Specifications The Use EOS Density and Smooth Liquid Density checkboxes affect the PR, PRSOUR, SRK, and SRKSOUR property packages. In previous versions to HYSYS 3.0, these property packages used the Costald liquid density model. This method was only applied when the reduced temperature (Tr) was less than unity. When the reduced temperature exceeded unity, it switched to the EOS liquid density. Hence, at Tr=1 there is a sharp change (discontinuity) in the liquid density causing problems especially in dynamics mode. For older cases including HYSIM cases, the density smoothing option is not selected. This means that liquid densities in cases using the smoothing option may differ from those cases in the past. By default, new cases have the density smoothing option selected and EOS density not selected, which is the recommended option. By default, or if the smoothing option is selected, HYSYS interpolates the liquid densities from Tr=0.95 to Tr=1.0, giving a smooth transition. It should be noted that the densities differ if the option is not selected. If both the Use EOS Density and Smooth Liquid Density boxes are not selected, the behaviour and results are the same as before (previous to HYSYS 3.0) and can cause problems as discussed earlier. Figure 2.9 Costald typically gives better liquid densities and smoothing near Tr=1 is common.
- 62. Fluid Package 2-17 2-17 Modify H2 Tc and Pc Option The Modify H2 Tc and Pc checkbox is available for the following property packages: Peng-Robinson, SourPR, SourSRK, and SRK. When the checkbox is selected, the critical temperature and pressure of Hydrogen is modified as a function of temperature. This feature is used to produce better results for simulation systems containing hydrogen. Indexed Viscosity Mixing Rule The Indexed Viscosity checkbox option enables you to toggle between two methods/rules used to calculate the blended liquid viscosity. There are two methods are: • default. HYSYS provides an estimate of the apparent liquid viscosity of an immiscible hydrocarbon liquid - aqueous mixture using only the viscosity and the volume fraction of the hydrocarbon phase. This method is selected when the Indexed Vicosity checkbox is clear. • viscosity index. Uses a linearized viscosity equation from Twu and Bulls. This method is selected when the Indexed Viscosity checkbox is selected. Figure 2.10 Figure 2.11
- 63. 2-18 HYSYS Fluid Package Property View 2-18 Viscosity Index Parameters Property View When you select the Indexed Viscosity checkbox, the Viscosity Index Parameters property view (associated to the active fluid package) appears. In the Viscosity Index Parameters group, you can specify the value for the three parameters used in the linearized viscosity calculation. The equation below the table displays how each parameter is used in the Twu and Bulls (1981)2 calculation. Theory Viscosity cannot be blended linearly, so a methodology is adopted that substitutes a function of the measured viscosity that is approximately linear with temperature. A linearized equation for viscosity is given by Twu and Bulls (1981)2: where: T = absolute temperature °R v = kinematic viscosity in cSt The above equation can be simplified to the following equation: Figure 2.12 (2.1) (2.2) v 0.7 + ( ) ln ln m T b + ln = a v c + ( ) ln ln b =
- 64. Fluid Package 2-19 2-19 where: a = constant at a fixed temperature v = kinematic viscosity in cSt c = adjustable parameter b = constant Pure Component HYSYS calculates the viscosity of a pure compound based on the component class designation as well as the phase in which the component is present as well as a temperature range: Each viscosity model is based on the corresponding states principle. A complete description of the corresponding stages NBS model used for viscosity prediction used by Ely and Hanely is given in the NBS publication3 . This model was modified to eliminate the iterative procedure for calculating the system shape factors. The generalized Leech-Leland shape factor models have been replaced by component specific models. Although the modified NBS models handles most hydrocarbons well, the Twu method is known to do a better job of predicting the viscosity of heavy hydrocarbon liquids. The Twu model is also based on the corresponding states principle and uses a viscosity correlation for n-alkanes as its reference fluid instead of methane. Experimental viscosity curves can be supplied via hypothetical properties or user data in HYSYS directly by mapping the library component as a hypothetical. System Vapor Liquid Light HCs (NBP<155F) Modified Ely and Hanley Ely and Hanely Heavy HCs Modified Ely and Hanley Twu Modified Letsou-Stiel Modified Ely and Hanely Modified Letsou-Stiel Estimations for viscosity can be further improved over internal estimation routines by supplying the experimental viscosity for a hypothetical component.
- 65. 2-20 HYSYS Fluid Package Property View 2-20 Activity Model Specifications The Activity Model Specification group appears for each activity model. There are three specification items within this group as shown in the following figure. Activity Models only perform calculations for the liquid phase, thus, you are required to specify the method to be used for solving the vapour phase. The first field in the Activity Model Specifications group allows you to select an appropriate Vapour Model for your fluid package. The list of vapour phase models are accessed through the drop- down list and are described below. The second field in the Activity Model Specifications group is the UNIFAC Estimation Temp. This temperature is used to estimate interaction parameters using the UNIFAC method. By default, the temperature is 25°C, although better results are achieved if you select a temperature that is closer to your anticipated operating conditions. Figure 2.13 Models Description Ideal The HYSYS default. It is applied for cases in which you are operating at low or moderate pressures. RK The generalized Redlich Kwong cubic equation of state is based on reduced temperature and reduced pressure, and is generally applicable to all gases. Virial Enables you to better model the vapour phase fugacities of systems that display strong vapour phase interactions. Typically this occurs in systems containing carboxylic acids, or other compounds that have the tendency to form stable hydrogen bonds in the vapour phase. PR Uses the Peng Robinson EOS to model the vapour phase. Use this option for all situations to which PR is applicable. SRK Uses the Soave Redlich Kwong EOS to model the vapour phase. Use this option for all situations to which SRK is applicable.
- 66. Fluid Package 2-21 2-21 The third field in this group is a checkbox for the Poynting Correction. This checkbox toggles the Poynting correction factor, which by default, is selected. The correction factor is only available for vapour phase models. The correction factor uses each component's molar volume (liquid phase) in the calculation of the overall compressibility factor. Amine Options The following Amine options are available when the Amine pkg is selected. The Thermodynamic Models for Aqueous Amine Solutions group contains radio buttons that enable you to select between the Kent-Eisenberg and Li-Mather models. The Vapour Phase Model group contains radio buttons that enable you to select between Ideal and Non-Ideal models. Figure 2.14 Refer to the Appendix C.4 - Equilibrium Solubility for detailed information on each thermodynamic model.
- 67. 2-22 HYSYS Fluid Package Property View 2-22 OLI_Electrolyte Options If the OLI_Electrolyte property package is selected for the fluid package, the following electrolyte options appear on the right side of the property view. After selecting electrolyte components for a component list from the database, a electrolyte system is established. The Initialize Electrolytes Environment button is used for the following: • Generating a group of additional components based on the selected components and the setting in Phase Option and Solid Option below. • Generating a corresponding Chemistry model for thermodynamic calculation. The View Electrolyte Reaction in Trace Window button is active when the Electrolytes Environment is initialized. It allows you to view what reaction(s) are involved in the Thermo flash calculation in the trace window. Phase Option Group The Phase Option includes the following four phases:vapour, organic, solid, and aqueous. The checkboxes allow you to select the material phases that are considered during the flash calculation. • The vapour, organic, and solid phases may be included or excluded from calculations. Figure 2.15 Refer to the HYSYS OLI Interface Reference Guide for detailed information on electrolytes.
- 68. Fluid Package 2-23 2-23 • The aqueous phase must be included in all electrolyte simulations and is not accessible. By default, the vapour and solid phases are selected with the organic phase cleared. The flexibility of selecting different phase combinations and the procedure for phase mixing used by the flash calculation is described in the following table: Solid Option Group The Solid Option group contains two checkboxes and the Selected Solid button. • HYSYS allows you to exclude all solids in your case by selecting the Exclude All Solids checkbox. • You can exclude solid components individually when the solid phase is included, by disabling solid components that are not of interest in the simulation. To do this, you must invoke Initialize Electrolytes Environment option first, and then click the Selected Solid button. When you click the button, you can select any component that you want to be included or excluded in all of the Electrolyte streams from the case. When the solid components are excluded, you have to re-initialize the Electrolytes Environment. Phases Included Description of the Flash Action Vapour and Solid Generates vapour and solid phases when they exist. If an organic phase appears, it is included in the vapour phase. Organic and Solid Generates the organic and solid phase when they exist. If a vapour phase appears, it is included in the organic phase. Vapour and Organic Generates the vapour and organic phase when they exist. If a solid phase appears, it is included in the aqueous phase. Vapour only Generates the vapour phase when it exists. If an organic phase appears, it will be included in the vapour phase and if a solid phase appears, it is included in the aqueous phase. Organic Only Generates the organic phase when it exists. If a vapour phase appears, it will be included in the organic phase and if a solid phase appears, it is included in the aqueous phase. Solid Only An electrolyte case with no organic or vapour phase is impossible and is not be accepted. Refer to Section 1.6.6 - Disabling Solid Components in the HYSYS OLI Interface Reference Guide for more information on including and excluding solids.
- 69. 2-24 HYSYS Fluid Package Property View 2-24 • If you select the All Scaling Tendency checkbox, all solids are excluded from the case. The Scaling Tendency Index is still calculated in the flash calculation. Redox Options Group The Redox Options group contains features that enable you to access the REDOX database. The REDOX database supports calculations involving the reduction and oxidation of pure metals and alloys to simulate the corrosion process in aqueous system. • The Included checkbox enables you to toggle between including or ignoring the selected REDOX sub-system for the active property package. • The Redox Subsystem Selection... button enables you to access the Redox Sub-Systems property view. This property view enables you to select the REDOX sub- system you want to apply to the property package. Figure 2.16 By default, OLI REDOX selects the redox subsystems that contain metals of engineering importance. This default is motivated by corrosion applications, for which redox transformations of engineering metals are important. Refer to Section 1.6.7 - Scaling Tendencies of the HYSYS OLI Interface Reference Guide for more information. Refer to REDOX section from Section 1.8.3 - Special Databases in the HYSYS OLI Interface Reference Guide for more information.
- 70. Fluid Package 2-25 2-25 Component List Selection Group You must also select a Component List to associate with the current Fluid Package from the Component List Selection drop- down list. Component Lists are stored outside of the Fluid Package Manager in the Components Manager and may contain traditional, hypothetical, and electrolyte components. HYSYS provides a warning message when you attempt to associate a Component List containing incompatible and/or not recommended components, with your property package. Also, if you switch between property packages, and any components are incompatible or not recommended for use with the current property package, a property view appears providing further options (see the following Warning Messages section). Warning Messages There are two different warning property views that you may encounter while modifying a Fluid Package. These situations arise when a Component List is installed into the Fluid Package and you want to select a new property package. Some components from the selected Component List may either not be recommended or are incompatible with the new property package selection. Figure 2.17 It is not recommended for users to attach the Master Component List to any Fluid Package. If only the master list exists, by default a cloned version of the Master Component List is created (called Component List -1). This list is selected initially when a new Fluid Package is created.
- 71. 2-26 HYSYS Fluid Package Property View 2-26 The first property view involves the use of Non-Recommended components. In HYSYS, you can select components that are not recommended for use with the current property package. If you try to switch to another property package for which the components are not recommended, the following property view appears: The objects from the Components Not Recommended for Property Package property view are described below: Figure 2.18 Object Description Not Recommended The non-recommended components are listed in this group. Desired Prop Pkg This field initially displays the Property Package for which the listed components are Not Recommended. This field is also a drop-down list of all available Property Packages so you may make an alternate selection without returning to the Fluid Package property view. Action This group box contains two radio buttons: • Delete Components. This removes incompatible components from the Fluid Package. • Keep Components. This keeps the components in the Fluid Package. OK Accepts the Desired Prop Pkg with the appropriate Action. Cancel Return to the Prop Pkg tab without making changes.
- 72. Fluid Package 2-27 2-27 The second dialog involves the use of Incompatible components. If you try to switch to a property package for which the components are incompatible, the following property view appears: The Objects from the Components Incompatible with Property Package property view are described below: Figure 2.19 Object Description Incompatible Components The incompatible components are listed in this group. Desired Prop Pkg This field initially displays the Property Package for which the listed components are Incompatible. This field is also a drop-down list of all available Property Packages so you may make an alternate selection without returning to the Fluid Package property view. OK This button accepts the Desired Prop Pkg with the appropriate Action (i.e., delete the incompatible components). Cancel Press this button to keep the current Property Package
- 73. 2-28 HYSYS Fluid Package Property View 2-28 2.4.2 Parameters Tab The information and options displayed on the Parameters tab is dependent on the Property Package selection. Some Property Packages have nothing on the Parameters tab, while others display additional information required. Those Property Packages which have information on the Parameters tab are mentioned in this section. If a value is estimated by HYSYS, it is indicated in red and can be modified. GCEOS (Generalized Cubic EOS) The Generalized Cubic Equation of State (GCEOS) is an alternative to the standard equation of state property packages. It allows you to define and customize the cubic equation to your own specifications. Figure 2.20
- 74. Fluid Package 2-29 2-29 Generalized Cubic Equation of State To gain an understanding of how to specify the GCEOS property package Parameters tab, you must first consider the general cubic equation of state form: where: (2.3) OR (2.4) (2.5) (2.6) (2.7) (2.8) (2.9) (2.10) (2.11) P RT v b – ---------- - a T ( ) v 2 ubv wb 2 + + ------------------------------------ - – = Z 3 C1Z 2 C2Z C3 + + + 0 = C1 Bu B – 1 – = C2 B 2 w B 2 u – Bu – A + = C3 B 3 w B 2 w AB + + ( ) – = Z Pv RT ------ - = A amixP R 2 T 2 ------------- - = B bmixP RT ------------- - = amix xixj ai T ( )aj T ( ) MRij × ∑ ∑ = bmix xibi ∑ = ai T ( ) acα =
- 75. 2-30 HYSYS Fluid Package Property View 2-30 MRij = the mixing rule To calculate the values of bi and ac, the cubic equation, Equation (2.14), is solved to find a value for . The value of ai in Equation (2.11) requires you to use the term. in turn is made up of the term.The parameter is a polynomial equation containing five parameters: . The parameter is also represented by a polynomial equation consisting of 4 parameters (A, B, C and D). The Parameters tab for the GCEOS consists of three group boxes: • GCEOS Pure Component Parameters • GCEOS Parameters • Initialize EOS (2.12) (2.13) (2.14) (2.15) (2.16) (2.17) ac 3 u w – ( )ξ 2 + 3 u 1 – ( )ξ + --------------------------------- - uξ + RTcVc = bi ξ Vc = u w u + ( ) w – [ ]ξ 3 3 w u + ( )ξ 2 3ξ 1 – + + 0 = ξ α α T ( ) 1 κ 1 TR 0.5 – ( ) + [ ] 2 = α κ κ κ0 κ1 κ2 κ3 κ4 κ5 , , , , , κ0 κ κ0 κ1 κ2 κ3TR – ( ) 1 TR κ4 – ( ) + [ ] 1 TR 0.5 + ( ) 0.7 TR – ( ) T κ5 × × + = κ0 A Bω Cω 2 Dω 3 + + + =
- 76. Fluid Package 2-31 2-31 GCEOS Pure Component Parameters Group This group allows you to define by specifying the values of . To specify the value of , select the kappa0 radio button and a property view similar to the one shown in Figure 2.21 should appear. The group consists of a matrix containing 4 parameters of Equation (2.17): A, B, C, and D for each component selected in the Fluid Package. To specify the remaining kappa parameters (in other words, ), select the kappa1-5 radio button. A new matrix appears in the GCEOS Pure Component Parameters group. This matrix allows you to specify the values for each component in the Fluid Package. Figure 2.21 Figure 2.22 α κ0 to κ5 κ0 κ0 to κ5 κ
- 77. 2-32 HYSYS Fluid Package Property View 2-32 Volume Translation The GCEOS allows for volume translation correction to provide a better calculation of liquid volume by the cubic equations of state. The correction is simply a translation along the volume axis, which results in a better calculation of liquid volume without affecting the VLE calculations. Mathematically this volume shift is represented as: where: = translated volume = is the translated cubic equation of state parameter ci = the pure component translated volume xi = the mole fraction of component i in the liquid phase. The resulting equation of state appears as shown in Equations (2.6), (2.7) and (2.8) with b and v replaced with the translated values ( and ). (2.18) (2.19) ṽ v xici i 1 = n ∑ – = b̃ b xici i 1 = n ∑ – = ṽ b̃ ṽ b̃
- 78. Fluid Package 2-33 2-33 To specify the value of the pure component correction volume, ci, select the Vol. Translation radio button. A property view similar to the one shown in Figure 2.23 will appear. The GCEOS Pure Components Parameters group now contains a matrix containing the volume correction constants for each component currently selected. The matrix should initially be empty. You may enter your own values into this matrix or you may click the Estimate button and have HYSYS estimate values for you. ci is estimated by matching liquid volume at normal boiling point temperature with that of the liquid volume obtained from an independent method (COSTALD). HYSYS only estimates the correction volume constant for those components whose cells have no value (i.e., they contain 0.000). If you specify one value in the matrix and click the Estimate button, you are only estimating those empty cells. Figure 2.23 To estimate a cell containing a previously entered value, select the cell, delete the current value and click the Estimate button.
- 79. 2-34 HYSYS Fluid Package Property View 2-34 GCEOS Parameters Group The GCEOS Parameters group allows you to specify the u and w parameters found in Equations (2.5) to (2.17). The following table lists the u and w values for some common equations of state: Equation Status Bar The GCEOS Parameter group also contains the Equation Status Bar. It tells you the status of the equation definition. There are two possible messages and are described as follows: Initialize EOS The Initialize EOS drop-down list allows you to initialize GCEOS Parameters tab with the default values associated with the selected Equation of State. The four options available are as follows: • van der Waals Equation • SRK Equation • PR Equation • PRSV Equation EOS u w van der Waals 0 0 Redlich-Kwong 1 0 Peng-Robinson 2 -1 Message Description This message appears if poor values are chosen for u and w. If the values selected for u and w are suitable this message appears.
- 80. Fluid Package 2-35 2-35 Kabadi Danner The Kabadi Danner Property Package uses Group Parameters that are automatically calculated by HYSYS. The values are generated from Twu's method. Peng-Robinson Stryjek Vera (PRSV) PRSV uses an empirical factor, Kappa, for fitting pure component vapour pressures. Figure 2.24 Figure 2.25
- 81. 2-36 HYSYS Fluid Package Property View 2-36 Zudkevitch Joffee This Property Package uses a b zero Parameter. HYSYS sets the b zero parameter of the ZJ equation to be zero. Chien Null The Chien Null model provides a consistent framework for applying different activity models on a binary by binary basis. On the Parameters tab, you can specify the Activity Model to be used for each component pair, as well as two additional pure component parameters required by the model. The two groups on the Parameters tab for the Chien Null property package are: • Chien Null Component Parameters • Chien Null Binary Component Parameters Figure 2.26
- 82. Fluid Package 2-37 2-37 Component Parameters Values for the Solubility and Molar Volume are displayed for each library component and estimated for hypotheticals. The Molar Volume parameter is used by the Regular Solution portion of the Chien Null equation. The Regular Solution is an Activity Model choice for Binary pair computations (see the following section). Binary Component Parameters All of the components in the case, including hypotheticals, are listed in the matrix. You can view the details for the liquid and vapour phase calculations by selecting the appropriate radio button: • Liq Activity Models • Virial Coefficients By selecting the Liq Activity Models radio button, you can specify the Activity Model that HYSYS uses for the calculation of each Figure 2.27 Figure 2.28
- 83. 2-38 HYSYS Fluid Package Property View 2-38 binary. The matrix displays the default property package method selected by HYSYS for each binary pair. The choices are accessed by highlighting the drop-down list in each cell. If Henry's Law is applicable to a component pair, HYSYS selects this as the default property method. When Henry's Law is selected by HYSYS, you cannot modify the model for the binary pair. In the previous property view, NRTL was selected as the default property package for all binary pairs. You can use the default selections, or you can set the property package for each binary pair. Remember that the selected method appears in both cells representing the binary. HYSYS may filter the list of options according to the components involved in the binary pair. By selecting the Virial Coefficients radio button, you can view and edit the virial coefficients for each binary. Values are only shown in this table when the Virial Vapour model is selected on the Set Up tab. You can use the default values suggested by HYSYS or edit these values. Virial coefficients for the pure species are shown along the diagonal of the matrix table, while cross coefficients, which are mixture properties between components, are those not along the diagonal. The Property Packages available in the drop-down list are: • None Required • Henry • van Laar • Margules • NRTL • Scatchard • Reg Soln • General
- 84. Fluid Package 2-39 2-39 Wilson The Molar Volume for each library component is displayed, as well as those values estimated for hypotheticals. Chao Seader & Grayson Streed The Chao Seader and Grayson Streed models also use a Molar Volume term. Values for Solubility, Molar Volume, and Acentricity are displayed for library components. The parameters are estimated for hypotheticals. Figure 2.29 Figure 2.30
- 85. 2-40 HYSYS Fluid Package Property View 2-40 Antoine HYSYS uses a six term Antoine expression, with a fixed F term. For library components, the minimum and maximum temperature and the coefficients (A through F) are displayed for each component. The values for Hypothetical components are estimated. Benedict-Webb-Rubin-Starling (BWRS) The Benedict-Webb-Rubin-Starling property package uses 11 pure-component parameters. For 15 compounds, the pure-component parameters are built-in to the property package and stored in the database. For other compounds, these parameters are automatically calculated using Tc, Vc, and acentric factor by HYSYS. The values are Figure 2.31 The BWRS pure-component parameters are: • B0 • A0 • C0 • gamma • b • a • alpha • c • D0 • d • E0
- 86. Fluid Package 2-41 2-41 generated from Han-Sterling correlations. 2.4.3 Binary Coefficients Tab The Binary Coefficients (Binary Coeffs) tab contains a matrix table which lists the interaction parameters for each component pair. Depending on the property method selected, different estimation methods may be available and a different property view may be shown. You have the option of overwriting any library value. The cells with unknown interaction parameters contain dashes (- --). When you exit the Basis Manager, unknown interaction parameters are set to zero. For all matrices on the Binary Coeffs tab, the horizontal components across the top of the matrix table represent the "i" component and the vertical components represent the "j" component. Generalized Cubic Equation of State Interaction Parameters When GCEOS is the selected property package on the Set Up Compounds with Built-in parameters are: • Methane • Ethane • Propane • I-Butane • n-Butane • I-Pentane • n-Pentane • n-Hexane • n-Heptane • n-Octane • Ethylene • Propylenen • N2 • CO2 • H2S
- 87. 2-42 HYSYS Fluid Package Property View 2-42 tab, the Binary Coeffs tab appears as shown below. The GCEOS property package allows you to select mixing methods used to calculate the equation of state parameter, aij. HYSYS assumes the -following general mixing rule: where: MRij = the mixing rule parameter. There are seven methods to choose for MRij: Figure 2.32 (2.20) Equation (2.21) (2.22) (2.23) (2.24) aij aiajMRij = MRij T ( ) 1 Aij BijT CijT 2 + + – ( ) = MRij T ( ) 1 Aij BijT Cij T ⁄ + + – ( ) = MRij T ( ) 1 xi 1 Aij BijT CijT 2 + + – ( ) – xj 1 Aij BijT CijT 2 + + – ( ) – = MRij T ( ) 1 xi 1 Aij BijT Cij T ⁄ + + – ( ) – xj 1 Aij BijT Cij T ⁄ + + – ( – =
- 88. Fluid Package 2-43 2-43 Each mixing rule allows for the specification of three parameters: Aij, Bij, and Cij, except for the Wong Sandler mixing rule which has the Aij and Bij parameter and also requires you to provide NRTL binary coefficients. The parameters are available through the three radio buttons in the upper left corner of the tab: Aij, Bij, and Cij/NRTL. By selecting a certain parameter’s radio button you may view the associated parameter matrix table. Wong Sandler Mixing Rule The Wong Sandler1 mixing rule is a density independent mixing rule in which the equation of state parameters amix and bmix of where: (2.25) where: (2.26) Wong Sandler Mixing Rule - Refer to Wong Sandler Mixing Rule section for more information. When selecting the Cij/NRTL radio button you are specifying the Cij parameter unless you are using the Wong Sandler mixing rule. In this case you are specifying NRTL binary coefficients used to calculate the Helmholtz energy. Equation MRij T ( ) 1 kij kji × ( ) xikij xjkji + -------------------------- - – = kij Aij BijT CijT 2 + + = MRij T ( ) 1 kij kji × ( ) xikij xjkji + -------------------------- - – = kij Aij BijT Cij T ------ - + + =
- 89. 2-44 HYSYS Fluid Package Property View 2-44 any cubic equation of state are determined by simultaneously solving: • the excess Helmholtz energy at infinite pressure. • the exact quadratic composition dependence of the second virial coefficient. To demonstrate this model, consider the relationship between the second viral coefficient B(T) and the equation of state parameters a and b: Consider the quadratic composition dependence of the second virial coefficient as: Substitute B with the relationship in Equation (2.27): To satisfy the requirements of Equation (2.29), the relationship for amix and bmix are: with: (2.27) (2.28) (2.29) (2.30) (2.31) B T ( ) b a RT ------ - – = Bm T ( ) xixjBij T ( ) j ∑ i ∑ = bmix amix RT --------- - – xixj b a RT ------ - – ij j ∑ i ∑ = bmix xixj b a RT ------ - – ij j ∑ i ∑ 1 F x ( ) RT ---------- - – ----------------------------------------- - = amix bmixF x ( ) =
- 90. Fluid Package 2-45 2-45 where: F(x) = is an arbirtrary function The cross second virial coefficient of Equation (2.10) can be related to those of pure components by the following relationship: The Helmholtz free energy departure function is the difference between the molar Helmholtz free energy of pure species i and the ideal gas at constant P and T. The expression for Ae is derived using lattice models and therefore assumes that there are no free sites on the lattice. This assumption can be approximated to the assumption that there is no free volume. Thus for the equation of state: bmix can be approximated by the following: (2.32) (2.33) (2.34) (2.35) b a RT ------ - – ij bi ai RT ------ - – bj aj RT ------ - – + 2 ---------------------------------------------------- - 1 Aij – BijT – ( ) = Ai T P , ( ) Ai IG T P , ( ) – P v d v ∞ = vi ∫ – RT v ------ - v d v ∞ = RT P ------ - ∫ – – = vi P ∞ → lim bi = vmix P ∞ → lim bmix = bmix xixj b a RT ------ - – ij j ∑ i ∑ 1 A∞ e x ( ) RT ------------- - xi ai biRT ----------- - i ∑ – + ------------------------------------------------------------- =
- 91. 2-46 HYSYS Fluid Package Property View 2-46 therefore amix is: and F(x) is: The Helmholtz free energy, , is calculated using the NRTL model. You are required to supply the binary coefficient values on the parameters matrix when the Cij/NRTL radio button is selected. (2.36) (2.37) term is equal to 0.3. amix bmix --------- - xi ai bi --- - A∞ e x ( ) – i ∑ = F x ( ) xi ai bi --- - A∞ e x ( ) – i ∑ = A∞ e x ( ) α
- 92. Fluid Package 2-47 2-47 Equation of State Interaction Parameter The Equation of State Interaction Parameters group is shown below for a selected EOS property package as displayed on the Binary Coeffs tab using an EOS, as displayed on the Binary Coeffs tab when an EOS is the selected property package, is shown below. The numbers displayed in the table are initially calculated by HYSYS, but you can modify them. All known binary interaction parameters are displayed, with unknowns displayed as dashes (---). You have the option of overwriting any library value. For all Equation of State parameters (except PRSV), Kij = Kji, so when you change the value of one of these, both cells of the pair automatically update with the same value. In many cases, the Figure 2.33 This information applies to the following Property Packages: • Kabadi Danner • Lee-Kesler Plocker • PR • PRSV • Soave Redlich Kwong, SRK • Sour PR • Sour SRK • Zudkevitch Joffee • BWRS These two radio buttons only appear for the PR and SRK based Equations of State. This is equivalent to no Kij
- 93. 2-48 HYSYS Fluid Package Property View 2-48 library interaction parameters for PRSV do have Kij = Kji, but HYSYS does not force this if you modify one parameter in a binary pair. If you are using PR or SRK (or one of the Sour options), two radio buttons are displayed at the bottom of the tab. Activity Model Interaction Parameters The Activity Model Interaction Parameters group, as displayed on the Binary Coeffs tab when an Activity Model is the selected property package, is shown in the figure below. Radio Button Description Estimate HC-HC/ Set Non HC-HC to 0.0 This radio button is the default selection. HYSYS provides the estimates for the interaction parameters in the table, setting all non-hydrocarbon pairs to 0. Set All to 0.0 When this is selected, HYSYS sets all interaction parameter values in the table to 0.0. Figure 2.34 The numbering and naming of the radio buttons selections vary according to the selected Activity Model.
- 94. Fluid Package 2-49 2-49 The interaction parameters for each binary pair are displayed; unknown values will show as dashes (---). You can overwrite any value or use one of the estimation methods. The estimation methods are described in the following section. To display a different coefficient matrix (i.e., Bij), select the appropriate radio button. Estimation Methods When using Activity Models, HYSYS provides three interaction parameter estimation methods. Select the estimation method by selecting one of the following radio buttons and then invoke the estimation by selecting one of the available buttons: This information applies to the following property packages: • Chien Null • Extended NRTL • General NRTL • Margules • NRTL • UNIQUAC • van Laar • Wilson You may reset the binary parameters to their original library values by clicking the Reset Params button. Button Description UNIFAC VLE HYSYS calculates parameters using the UNIFAC VLE model. UNIFAC LLE HYSYS calculates all parameters using the UNIFAC LLE model. Immiscible The three buttons used for the UNIFAC estimations are replaced by the following: • Row in Clm Pair. Use this button to estimate the parameters such that the row component (j) is immiscible in the column component (i). • Clm in Row Pair. Use this button to estimate parameters such that the column components (j) are immiscible in the row components (i). • All in Row. Use this button to estimate parameters such that both components are mutually immiscible. Alphaij = Alphaji, but Aij Aji. ≠
- 95. 2-50 HYSYS Fluid Package Property View 2-50 If you have selected either the UNIFAC VLE or UNIFAC LLE estimation method, you can apply it in one of the following ways, by selecting the appropriate button: 2.4.4 Stability Test Tab The stability test can be thought of as introducing a "droplet" of nucleus into the fluid. The droplet then either grows into a distinctive phase or is dissolved in the fluid. For multi-phase fluids, there exist multiple false calculated solutions. A false solution exists when convergence occurs for a lower number of phases than exists in the fluid. For example, with a three-phase fluid, there is the correct three-phase solution, at least three false two-phase solutions and multiple false single-phase solutions. A major problem in converging the flash calculation is arriving at the right solution without a prior knowledge of the number of equilibrium phases. Since the Wilson equation does not handle three phase systems, the Coeff Estimation group does not show the UNIFAC LLE or Immiscible radio buttons when this property package is used. UNIFAC estimations are by default performed at 25°C, unless you change this value on the Set Up tab. Button Description Individual Pair This button is only visible when UNIFAC VLE is selected. It calculates the parameters for the selected component pair, Aij and Aji. The existing values in the matrix are overwritten. Unknowns Only If you delete the contents of cells or if HYSYS does not provide defaults values, you can use this option and have HYSYS calculate the activity parameters for all the unknown pairs. You may reset the binary parameters to their original library values by clicking the Reset Params button. All Binaries Recalculates all the binaries in the matrix. If you had changed some of the original HYSYS values, you can use this to have HYSYS re-estimate the entire matrix.
- 96. Fluid Package 2-51 2-51 The Stability Test allows you to instruct HYSYS on how to perform phase stability calculations in the Flowsheet. If you encounter situations where a flash calculation fails or you are suspicious about results, you can use this option to approach the solution using a different route. The strategy used in HYSYS is as follows: unless there is strong evidence for three phases, HYSYS first performs a two-phase flash. The resulting phases are then tested for their stability. Dynamic Mode Flash Options Group HYSYS enables you to modify the flash calculation methods to Figure 2.35
- 97. 2-52 HYSYS Fluid Package Property View 2-52 be used. There are three setting options available: If the IOFlash option is selected, the Pressure Flow Solver group on the Dynamics page of the Preferences options allows the flash to be solved simultaneously with heat transfer equations. The option can result in a further significant speed increase, but should only be used if the case is stable using IO. If a dynamics case has more than one liquid phase (or if a single liquid phase is aqueous or a hydrocarbon), it is recommended that you use the Phase Sorting Method for the fluid package on Flash Option Description Try IOFlash first This activates an alternative optimized Inside-Out flash algorithm that may provide a significant speed improvement in many cases. It is aimed at dynamics mode, but operates in steady state mode as well. The flash can handle rigorous three phase calculations using the Stability Test Parameters settings, although it is not tested as well as the default flash algorithms and does not work with all property packages. If you experience problems that are flash related, try selecting or deselecting the option. For maximum speed in two phase systems, you can also set the Maximum Phases Allowed for the fluid package to two in the Stability Test Parameters group, or set the Method to none to disable the test. If the IOFlash fails, HYSYS will immediately go to method selected in the Secant Flash Options group. The remaining options are for the dynamic mode secant flash options. Flash3 This is the default secant flash algorithm used in dynamics mode. It is fast, but does not perform rigorous phase stability tests based on the option set in the Stability Test Parameters group. Hence, it may not always detect a second liquid phase when it is present. Multi Phase This is a secant flash algorithm that performs phase stability testing according to the settings in the Stability Test Parameters group. This option is typically slower than the flash3 option. It can be used when multiple liquid phases are important or in rare cases where using the flash3 option results in instabilities due to the second liquid phase not being detected consistently. Use Multi Phase Estimates The checkbox becomes available when you select Multi Phase as the Secant Flash Option. If the case consist of three phases, estimates are passed to the flash which speeds up some flashes. COMThermo is not optimized for dynamics mode and may result in performance issues if used in dynamics mode.
- 98. Fluid Package 2-53 2-53 the Section 2.4.5 - Phase Order Tab. By default, phases are sorted on density and phase types. If the phase type changes, instabilities may result. The Phase Sorting Methods allow you to clearly define the order in which phases should be defined so that they are consistent. Stability Test Parameters Group You can specify the maximum number of phases allowed (2 or 3) in the Maximum Phases Allowed input cell. If this value is set to 2, the stability test quits after 2-phase flashes. Occasionally, you may still get 3 phases, as the flash may attempt to start directly with the 3-phase flash. The Stability scheme used is that proposed by Michelson. In the Method group, you can select the method for performing the stability test calculations by selecting one of the following radio buttons: Radio Button Description None No stability test is performed. Low Uses a default set of Phases/Components to Initiate the Stability Test. This method includes the Deleted phases (if they exist), the Wilson's Equation initial guess and the Water component (if it exists) in the fluid. Medium In addition to the options used for the Low method, this method also includes the Average of Existing phase, the Ideal Gas phase and the heaviest and lightest components in the fluid. All All available Phases and Components are used to initiate the test.
- 99. 2-54 HYSYS Fluid Package Property View 2-54 Phases to Initiate Test There are four choices listed within the Phase(s) to Initiate Test group. These checkboxes are selected according to the radio button selection in the Method group. If you change the status of any option, the radio button in the Method group is automatically set to User. If any one of these initiating nuclei (initial guesses) forms a distinctive phase, the existing fluid is unstable and this nucleus provides the initial guess for the three-phase flash. If none of these initial guesses shows additional phases, it can only be said that the fluid is likely to be stable. One limitation with the stability test is the fact that it relies on the property package chosen rather than physical reality. At best, it is as accurate as the property package. For instance, the NRTL package is known to be ill-behaved in the sense that it could actually predict numerous equilibrium phases that do not exist in reality. Thus, turning on all initial guesses for NRTL may not be a good idea. User Allows you to activate any combination of checkboxes in the Phase(s) to Initiate Test and Comp(s) to Initiate Test groups. If you make changes when a default Method radio button (i.e., Low, Medium) is selected, the method will be changed to User automatically. HYSIM Flash This is the flash method used in HYSIM. If this choice is selected, HYSYS will use the same flash routines as in HYSIM and no stability test will be performed. This option allows comparison of results between HYSIM and HYSYS. This stability option is not recommended for dynamics mode. Use the default flash3 option with the stability parameter set to none. Checkboxes Description Deleted If a phase is removed during the 2-phase flash, a droplet of the deleted fluid is re-introduced. Average of Existing The existing equilibrium fluids are mixed in equal portions; a droplet of that fluid is introduced. Ideal Gas A small amount of ideal gas is introduced. Wilson's Equation A hypothetical fluid is created using the Wilson's K-value and is used to initiate the stability test. Radio Button Description
- 100. Fluid Package 2-55 2-55 Temperature Limits The temperature limits are intended to be used in dynamics mode and are set to stop the flash when the limits are attained. If the limits are reached, then dynamics will extrapolate thereafter. The limits avoid potential problems with some property packages at low temperatures and during severe process upsets where you would get numerical errors and heat exchanger convergence problems. Components to Initiate Test When a droplet of nucleus is introduced into the fluid, the droplet either grows into a distinctive phase or is dissolved in the fluid. Another obvious choice for the droplet composition is one of the existing pure components. For example, if the fluid contains hexane, methanol and water, one could try introducing a droplet of hexane, a droplet of methanol or a droplet of water. The choices for the pure component droplets are listed in the Comp(s) to Initiate Test group. 2.4.5 Phase Order Tab The Phase order feature is intended for dynamics. HYSYS dynamics always uses three phases for streams and fluids in the stream property view. For each unit operation, dynamics also assumes that the same material is in the same phase slot for all of the connected streams. The order of the first phase is always vapour and the second phase is liquid. The third phase may be aqueous or it can be a second liquid phase. By default, HYSYS sorts these phases based on their Type (liquid or aqueous) and Phase Density. However, subtle changes to the stream properties may change the order. Stream properties displayed as a liquid phase in one instance may be displayed as an aqueous phase in another. For example, inside a tray section the composition of a phase may change so that instead of being Refer to Section 12.2 - Material Stream Property View of the HYSYS Operations Guide for more information on stream properties.
- 101. 2-56 HYSYS Fluid Package Property View 2-56 aqueous it is a liquid phase. The phase moves to a different slot in the fluid. This can cause disturbances in dynamics mode. The Phase Sorting Method includes two options and is shown below. Use Phase Type and Density This option can cause instabilities in dynamics. In practice if small spikes are identified and an examination of the flowsheet reveals that some material appears in different phase slots in different parts of the flowsheet (where the spikes originate) than the user specified option is recommended. Use User Specified Primary Components The Use User Specified Primary Components option displays the Select Primary Phase Components group that allows you to specify which components should be in phase slot 1 and which components should be in phase slot 2. These checks are used to determine the phase order wherever the fluid package in Figure 2.36 This option changes the order of phases in steady state as well. Although in steady state many of the calculations depend on the phase type and not the order, and hence should not have any significant impact.
- 102. Fluid Package 2-57 2-57 question is used. If there is only one non-vapour phase present and the mole fractions of the primary component adds up to more than the specified threshold, it is considered to belong in phase slot 1 and of type “liquid 1”. Otherwise the ratio of primary component for the two choices is examined. This option is recommended when: • a simulation is performed and it has more than one liquid phase. • the densities of the two liquid phases may be close. • one or more phases is close to being labelled either aqueous or liquid. 2.4.6 Reactions Tab Within the Basis Environment, all reactions are defined through the Reaction Manager (Reactions tab of the Simulation Basis Manager). On the Rxns tab of the Fluid Package property view, Changing this option does not resolve the case or immediately update the affected streams. The changes occur while the integrator is running, which minimizes disturbances. See Chapter 5 - Reactions for more information.
- 103. 2-58 HYSYS Fluid Package Property View 2-58 you are limited to attaching/detaching reaction sets. The objects for the Rxns tab within the Fluid Package property view are described below. 2.4.7 Tabular Tab The Tabular Package can regress the experimental data for select thermophysical properties such that a fit is obtained for a chosen mathematical expression. The Tabular Package is utilized in conjunction with one of the HYSYS property methods. Your targeted properties are then calculated as replacements for Figure 2.37 Object Description Current Reactions Sets This lists all the currently loaded reactions set in this Fluid Package. Associated Reactions There are two Associated Reactions list boxes. Both boxes displays all the reactions associated with the respective selected Reaction Set. Add Set This button attaches the highlighted Available Reaction Set to the Fluid Package and displays it in the Current Reactions Sets group. Remove This button removes the highlighted Current Reaction Set from the Fluid Package. Available Reactions Sets This list-box displays all the Available Reactions Sets in the case. Simultaneous Basis Mgr Click this button to access the Reaction Manager.
- 104. Fluid Package 2-59 2-59 whatever procedure the associated property method would have used. Although the Tabular Package can be used for calculating every property for all components in the case, it is best used for matching a specific aspect of your process. A typical example would be in the calculation of viscosities for chemical systems, where the Tabular Package will often provide better results than the Activity Models. Tabular Package calculations are based on mathematical expressions that represent the pure component property as a function of temperature. The values of the property for each component at the process temperature are then combined, using the stream composition and mixing rule that you specify. The Tabular provides access to a comprehensive regression package. This allows you to supply experimental data for your components and have HYSYS regress the data to a selected expression. Essentially, an unlimited number of expressions are available to represent your property data. There are 32 basic equation shapes, 32 Y term shapes, 29 X term shapes, as well as Y and X power functions. The Tabular provides plotting capabilities to examine how well the selected expression predicts the property. You are not restricted to the use of a single expression for each property. Each component can be represented using the best expression. You may not need to supply experimental data to use the Tabular. If you have access to a mathematical representation for a component/property pair, you can simply select the correct equation shape and supply the coefficients directly. Further, HYSYS provides a data base for nearly 1,000 library components, so you can use this information directly within the HYSYS contains a default library containing data for over 1,000 components.
- 105. 2-60 HYSYS Fluid Package Property View 2-60 Tabular without supplying any data whatsoever. In addition, HYSYS can directly access the information in the PPDS database for use in the Tabular. This database is similar to that provided with HYSYS in that the properties for the components are represented using a mathematical expression. Requirements for Using the Tabular There are only two requirements on the usage of the Tabular package. First, most properties require that all components in the case have their property value calculated by the Tabular. Second, enthalpy calculations require that the Tabular be used for both the liquid and vapour phase calculations. Similarly, you may use only one enthalpy type property for each phase. For example, liquid enthalpy and liquid heat capacity cannot both be selected. An extension to this occurs when the latent heat property is selected. When this property is activated, only one enthalpy type property or one heat capacity property may be selected. Whenever experimental data is supplied, it is retained in the memory by HYSYS and stored in the case. The PPDS database is an optional tabular feature. Contact your Hyprotech representative for further information. The Heat of Mixing property can be applied in one of two manners. For Activity Models that do not have Heat of Mixing calculations built in, this allows you to supply data or have the coefficients estimated, and have Heats of Mixing applied throughout the flowsheet. Equations of State do account for Heat of Mixing in their enthalpy calculations, however, in certain instances predict the value incorrectly. You can use this route to apply a correction factor to the Equation of State. In the cases where the Equation of State is predicting too high a value, implementing a negative Heat of Mixing can correct this.
- 106. Fluid Package 2-61 2-61 Limits in the Tabular Option In enthalpy extrapolation, if the upper temperature limit (Tmax) is less than the critical temperature (Tc) HYSYS Tabular option continues to extrapolate the data based on the original curve up to the critical point. At this point, an internal extrapolation method is used to calculate the liquid enthalpy. Due to the internal extrapolation method, there may be a huge discontinuity and poor extrapolation results from Tmax to Tc. The poor calculated values cause problem with the PH flash calculation. There are two methods to avoid this problem: • Increase the Tmax value of the original enthalpy curve. However, as mentioned above the curve itself does not extend above Tmax very well and produces poor results. You will have to be responsible for changing the curve shape to extrapolate in a better manner. • User the Enthalpy Model Tr Limit option. This option allows you to control the starting temperature at which the extrapolation method is implemented. So instead of Tc, the extrapolation will start at a certain Tr (the default value is 0, which tells HYSYS to use the default method) typically 0.7 to 0.99. Extrapolating accurate/adequate data is important, especially for enthalpy values approaching the critical point, as the values can change in odd manner and may require special extrapolation. If you are not using PPDS mixing rules (PPDS extrapolation methods) HYSYS supplies a very simple extrapolation based on constant Cp calculated from the original tabular enthalpy curve. This method keeps everything monotonically increasing through the critical point and into the dense phase.
- 107. 2-62 HYSYS Fluid Package Property View 2-62 Using the Tabular Package When using the Tabular package a general sequence of steps is shown below: 1. Enable the Configuration and Notes pages (under the Options branch) by selecting the Enable Tabular Properties checkbox. 2. Select the Basis for Tabular Enthalpy by clicking the appropriate radio button on the Configuration page. 3. Select the checkboxes for the desired target properties from the All Properties, Physical, and Thermodynamic pages in the Options branch. Figure 2.38 To view all pages under the Options branch, use the Plus icon to expand the tree browser.
- 108. Fluid Package 2-63 2-63 The All Properties page is shown below. As properties are added, the Information branch also becomes expandible. To expand the branches in the tree browser, click the Plus icon that appears in front of a branch. Expanding the Information branch displays all of the active target properties selected on the pages under the Options branch. If the Heat of Mixing property is activated on the All Properties or Thermodynamics page, a new expandible branch for Heat of Mixing appears in the Tabular Package group. 4. If you have the PPDS database, select the checkbox for the database. 5. Once a target property is selected on one of the three pages under the Options branch, you can select the Mixing Basis by using the drop-down list. The Parameter value may also be changed on this page. Figure 2.39
- 109. 2-64 HYSYS Fluid Package Property View 2-64 6. To view the existing library information, you must first select the desired page from the expandible Information branch. Click the desired property from the tree browser. 7. To plot the existing library information, click the Cmp Plots button. Click a component using the drop-down list in the Curve Selection group to change the components being plotted. The variables, Enthalpy vs. Temperature are plotted from the Variables group and shown in the figure below. Figure 2.40 Figure 2.41
- 110. Fluid Package 2-65 2-65 8. Return to the Information page of the property by closing the plot property view. To view the PropCurve property view for a selected component, highlight a value in the column of the desired component and click the Cmp Prop Detail button. 9. Set the Equation Form and supply data. You can view this same format of data for library components. The Tabular tab of the fluid package property view contains a tree browser which controls the options displayed in the tab. The options depend on the branches selected in the tree browser, these branches are: • Configuration • Options • Information • Heat of Mixing (appears only when Heat of Mixing is activated in the Options) • Notes Figure 2.42
- 111. 2-66 HYSYS Fluid Package Property View 2-66 Configuration Branch The Configuration page consists of two groups, the Global Tabular Calculation Options, and the Basis for Tab. Enthalpy (ideal gas). Global Tabular Calculation Behaviour Group The Global Tabular Calculation Behaviour Group contains two checkbox options: Figure 2.43 Checkbox Description Enable Calculation of Active Properties If this is activated, all the selected Active Properties are calculated via the Tabular Package. If this checkbox is cleared, all properties are calculated by the Property Package. This provides a master switch to enable/disable the Tabular Package while retaining the Active Property selections. Enable Tabular Properties Toggles the Tabular Properties on or off. If the checkbox is toggled off, no other pages are available and none of the previously inputted data is stored. Selecting the Enable Tabular Properties checkbox activates the Options, Information, and Notes branch.
- 112. Fluid Package 2-67 2-67 Basis for Tabular Enthalpies This group becomes active after the Enable Tabular Properties checkbox is clicked. It allows you to select between the enthalpy basis for tabular calculations: • H = 0 K, ideal vapour (HYSIM basis) • H = Heat of formation at 25 °C, ideal vapour Options Branch You can target a property through the three sub-branches available in the Options branch. The difference between the Enable Calculation of Active Properties and the Enable Tabular Properties checkboxes: The Enable Calculation of Active Properties checkbox toggles between the properties regressed from the data supplied on the Tabular tab and the default values calculated by the Property Package. While clearing the checkbox returns to the default Property Package values, the tab retains all inputted data for the active property selections. The Enable Tabular Properties checkbox makes the other pages active for specification. Clearing this checkbox purges the tab of any tabular property data it might have previously contained. Figure 2.44
- 113. 2-68 HYSYS Fluid Package Property View 2-68 To expand the branch, click the Plus icon in front of the Options label in the Tabular Package group. This displays the All Properties, Physical, and Thermodynamics pages. Each one of these pages consists of a five column matrix table. Property Type The All Properties page consists of seventeen properties which include both the Physical and Thermodynamic properties. These properties have then been subdivided into two groups and displayed again on either the Physical or Thermodynamics page. These properties are listed in the table below, along with the subgroup that they belong to: • K-value (V/L1) [Thermodynamic] • K-value (V/L2) [Thermodynamic] • K-value (L1/L2) [Thermodynamic] • Enthalpy(L) [Thermodynamic] • Enthalpy(V) [Thermodynamic] • Latent Heat [Thermodynamic] • Heat Capacity(L) [Thermodynamic] • Heat Capacity(V) [Thermodynamic] • Heat of Mixing [Thermodynamic] • Viscosity (L) [Physical] • Viscosity (V) [Physical] • Thermal Cond (L) [Physical] • Thermal Cond (V) [Physical] • Surface Tension [Physical] • Density (L) [Physical] • Entropy(L) [Thermodynamic] • Entropy(V) [Thermodynamic] Use HYSYS/Use PPDS The checkboxes in the Use HYSYS and Use PPDS columns allow you to select between the Hyprotech and the PPDS libraries. Depending on the property type selected, the PPDS library may not be available. When the PPDS library is available, the checkbox changes from light grey to white.
- 114. Fluid Package 2-69 2-69 Composition Basis The Composition Basis allows you to select the Basis (mole, mass, or liq volume) on which the mixing rule is applied. When you select a property type the Composition Basis becomes active for that property. The available options can be accessed from the drop-down list within the cell of each property selected. The default mixing rule which is applied when calculating the overall property is shown in the following form: Mixing Parameter The last column in the matrix table is the Mixing Parameter. This allows you to specify the coefficient (f) to use for the mixing rule calculations. Notice that the default value is 1.00. The value that HYSYS uses as the default is dependent on the property selected. For instance, if you select Liquid Viscosity as the property type, HYSYS uses 0.33 as the default for the Mixing Parameter. If you are using the PPDS database, you can modify the mixing rule parameters for any property with the exception of the vapour viscosity and vapour thermal conductivity. The parameters for these properties are set internally to the appropriate PPDS mixing rule. The PPDS database is an optional tabular feature. Contact your Hyprotech representative for further information. (2.38) Propertymix xiPropertyi f i ∑ 1 f -- - =
- 115. 2-70 HYSYS Fluid Package Property View 2-70 Information Branch After properties are activated on one of the three pages in the Options branch, the property appears in the Information branch. This branch can be expanded by clicking the Plus icon in front of the Information label in the Tabular Package group. A component may be targeted by clicking in any cell in the component’s column. For example, if Propane was the component of interest, click in any cell in the third column. Once the component is targeted, select the Cmp Prop Detail button to access the PropCurve property view. Most of the information contained in the PropCurve property view is displayed on the Information pages and can also be changed there. Cmp Plots Button The Cmp Plot button accesses the plot of Temperature vs. the selected Property Type. The Variables group shows the property Figure 2.45 The Heat of Mixing property does not create a page in the Information branch. Instead it will create a unique branch in the Tabular Package group. See Supplying Tabular Data for further information on the PropCurve property view.
- 116. Fluid Package 2-71 2-71 used for the X and Y axis (Enthalpy in this case). HYSYS can only plot four curves at a time. The Curve Selection group lists the components which are plotted on the graph. The default is to plot the first four components in the component list. You can replace the default components in the Curve Selection group with other components by using the drop-down list in each cell. Select the component you want to add to the Curve Selection group. The new component replaces the previously selected component in the Curve Selection group, and HYSYS redraws the graph, displaying the data of the new component. HYSYS uses the current expressions to plot the graphs, either from the HYSYS library or your supplied regressed data. Heat of Mixing Branch When the Heat of Mixing property is activated on either the All Properties or the Thermodynamic page in the Options branch, a new branch gets added to the root of the tree browser Figure 2.46 Object inspect the plot area to access the Graph Control property view. Refer to Section 10.4 - Graph Control of the HYSYS User Guide for more information.
- 117. 2-72 HYSYS Fluid Package Property View 2-72 in the Tabular Properties group. This branch can be expanded by clicking the Plus icon in front of the Heat of Mixing label in the Tabular Package group. The pages in the branch correspond to the components in the fluid package. Heat of Mixing Page This page is only visible when Heat of Mixing is selected on the All Properties or Thermodynamic pages. It consists of the following objects: Figure 2.47 Object Description UNIFAC VLE HYSYS uses the UNIFAC VLE estimation method to calculate the binary coefficients. This overwrites any existing coefficients. UNIFAC LLE Same as UNIFAC VLE, except the LLE estimation methods are used. Temperature The reference temperature at which the UNIFAC parameters are calculated.
- 118. Fluid Package 2-73 2-73 Composition Pages The Composition pages in the Heat of Mixing branch are very similar to the pages contained in the Information branch. Click the View Details button to access a modified PropCurve property view. The only difference is that there is no Coeff tab. Most of the information contained in the PropCurve property view is displayed on the Information pages, where it can be modified. Notes Page Any comments regarding the tabular data or the simulation in general may be displayed here. Supplying Tabular Data When you have specified the flowsheet properties for which you want to use the Tabular Package, you can change the data HYSYS uses in calculating the properties. HYSYS contains a data file with regressed coefficients and the associated equation shape, for most components. To illustrate the method of supplying data, use Methane as a Figure 2.48 See Supplying Tabular Data for further information on the PropCurve property view.
- 119. 2-74 HYSYS Fluid Package Property View 2-74 component and Liquid Enthalpy as the Property. From the Enthalpy (L) Tabular Package group, select the Methane cell as the component and click the Cmp. Prop. Detail button. The Variables tab of the PropCurve property view is displayed as shown below: The PropCurve property view contains the following tabs: Variables Tab The Variables tab is the first tab of the PropCurve property view. If Heat of Mixing is used, you can access the Prop Curve by selecting the component and then click the View Details button. Although it should be noted that this property view does not include the Coeffs tab. Figure 2.49 Tab Description Variables Specify the equation shapes and power functions for the property. Coeff Displays the current coefficients for the selected equation. Table Current tabular data for the property (library or user supplied). Plots Plots of the property using the tabular data and the regressed equation. Notes User supplied descriptive notes for the regression.
- 120. Fluid Package 2-75 2-75 It contains four groups, X-Variable, Y-Variable, Q-Variable, and Equation Form. The Variables tab is shown in the previous figure. X-Variable Group This group contains information relating to the X-Variable and is described below. Cells Description X Since all properties are measured versus Temperature, this cell always shows Temperature when using the Tabular Package. Unit Displays the units for the temperature values. You cannot change the units here. The HYSYS internal units for Temperature, K, are always used. Shape This is the shape of the X variable. The choices for the X Shape can be accessed using the drop-down list in the cell. There are 29 available shapes. Use the scroll bar to move through the list. In this case, the shape selected is Xvar:x. This means that the X variables in the equation are equal to X, which represents temperature. If LogX:log10(x) is selected as the X Shape, then the X variables in the equation are replaced by log10(x). Shape Norm This is a numerical value used in some of the X Shapes. In the drop-down list for X Shape, notice that the second choice is Xreduced:x/norm. The x/norm term, where norm = 190.70, replaces the X variable in the equation. You can change the numerical value for Norm in the cell. Exponent Allows you to apply a power term to the X term, for example, X0.5 . Eqn Minimum Defines the minimum boundary for the X variable. When a flowsheet calculation for the property is outside the range, HYSYS uses an internal method for extrapolation of the curve. This method is dependent on the Property being used. See the Equation Form section. Eqn Maximum Defines the maximum boundary for the X variable. When a flowsheet calculation for the property is outside the range, HYSYS uses an internal method for extrapolation of the curve. This method is dependent on the Property being used. See the Equation Form section.
- 121. 2-76 HYSYS Fluid Package Property View 2-76 Y-Variable Group This group contains all information relating to the Y-Variable. Cells Description Y This is the property chosen for Tabular calculations. Unit Displays the units for the Y variable. You cannot change the units here, it must be done through the Basis Manager (Preferences option). Shape This is the shape of the Y variable. The choices for the Y Shape are available using the drop-down list within the cell. There are 32 shapes selected. Use the scroll bar to move through the list. In this case, the shape chosen is Yvar:y. This means that the Y variables in the equation are equal to Y, which represents enthalpy. If LogY:log10(y) is chosen as the Y Shape, then the Y variables in the equation are replaced by log10(y). Shape Norm This is a numerical value used in some of the Y Shapes. In the drop-down list for Y Shape, notice that the second choice is Yreduced:y/norm. The Y variable in the equation is replaced by the y/norm value. This numerical value can be changed within the cell. Exponent Allows you to apply a power term to the Y term, for example, Y0.5.
- 122. Fluid Package 2-77 2-77 Q-Variable Group This group contains all information relating to the Q Variable. This Variable is used in some of the X and Y Variable equations. Coefficients Group This group is only visible in the Heat of Mixing page when it is an active property. The Coefficients group contains the coefficient values either obtained from the HYSYS database, or regressed from data supplied in the Table tab. Equation Form Depending on which property you have selected, HYSYS selects a default Equation Shape. You have the option of using this equation or an alternative one. You can select a different equation from the drop-down list associated with this cell. The drop-down list contains 33 available equations to choose from. Cell Description Q Represents the Q variable which is always Pressure. Unit Displays the units for the Q Variable, which are always the default internal units of pressure, kPa. Default This is the default numerical value given to the Q Variable which can be modified within the cell. Figure 2.50
- 123. 2-78 HYSYS Fluid Package Property View 2-78 When HYSYS cannot regress the data to produce equation coefficients for the selected equation shape, the message Non- Regressable appears on the right of the drop-down list. You can still use the equation shape, but you have to manually input the coefficients. Coeff Tab This tab displays the current coefficients for the specified equation. Notice that this property view also contains the Equation Form group, allowing you to change the equation from this tab. Figure 2.51 Figure 2.52 Some equation shapes only allow you to supply coefficients directly. You are informed if the equation shape cannot have tabular data regressed to it. The X, Y, and Q variables and their units are displayed for reference only. They can not be modified.
- 124. Fluid Package 2-79 2-79 The Coefficients group contains the coefficient values either obtained from the HYSYS database, or regressed from data supplied in the Table tab. The checkboxes supplied next to each coefficient value allow you to instruct HYSYS not to regress certain coefficients, they will remain at the fixed value (default or user supplied) during regression. Table Tab You can supply your tabular data before or after selecting the Equation Shape. To enter data, select the Table tab. Figure 2.53 Figure 2.54
- 125. 2-80 HYSYS Fluid Package Property View 2-80 If the component is from the HYSYS library, 20 points are generated between the current Min and Max temperatures. If you need to supply data, click the Clear Data button. You can also add your data to the HYSYS default data and have it included in the regression. Supplying Data If you are going to supply data, select the unit cell under the X and Y variable columns and press any key to open the drop- down list. From the list you can change to the appropriate units for your data. The procedure for supplying data is as follows: 1. Select the appropriate units for your data. 2. Clear the existing data with the Clear Data button, or move to the location that you want to overwrite. 3. Supply your data. Coefficients calculated using the deleted data are still present on the Coeff tab until the Regress button is clicked. 4. Supply Net Weight Factors if desired. Q-Column This column contains the Pressure variable. The presence of this extra variable helps in providing better regression for the data. As with the X and Y variables, the units for pressure can be changed to any of the units available in the drop-down list. Wt Factor You can apply weighting to individual data points. When the regression is performed, the points with higher weighting factors are treated preferentially, ensuring the best fit through that region. To delete a particular data point, highlight the data point and press the DELETE key.
- 126. Fluid Package 2-81 2-81 Regressing the Data After you have provided the data, you need to update the equation coefficients. Click the Regress button to have HYSYS regress your data, generating the coefficients based on the current shapes. If you then change any of the equation shapes, the data you supplied is regressed again. You can re-enter the regression package and select a new shape to have your data regressed. Data Retention Whenever experimental data is supplied, it is retained by HYSYS in memory and is stored in the case. At a later date, you can come back into the Tabular Package and modify data for the Property, and HYSYS regresses the data once again. Plot Tab To examine how the current equations and coefficients represent the property, select the Plots tab to view the plot. Figure 2.55 Use the Plot button on the Tabular tab to display up to four component curves on the same graph.
- 127. 2-82 HYSYS Fluid Package Property View 2-82 Only the selected component (in this case Methane) is displayed. The plot contains two curves, one plotted with the regressed equation and the other with the Table values. If the Tabular values supplied on the Table tab are in different units, they are still plotted here using the HYSYS internal units. This provides a means for gauging the accuracy of the regression. In this example, the two curves overlap each other, such that it appears to only show one curve. Besides displaying the component curve, this property view also displays the number of points used in determining the tabular equation (in this case 20). As well, the x-Axis group displays the Min (91.7) and Max (169) x-values on the curve. You can change the Min and Max x-axis values and have HYSYS extend the curve appropriately. Place the cursor in the Min cell and type in a new value. For example, type 70. This replaces 91.7, and HYSYS extends the curve to include this value. Similarly, you can change the Max value, and have HYSYS extend the curve to include this new value. Type 180 to replace the Max value of 169.00. The new curve is shown below. Notes Page The Notes page is used for supplying a description to associate with the Tabular Data just entered. When you have finished providing all necessary data, close the PropCurve property view and return to the Tabular tab of the Figure 2.56 To review all notes within the fluid package, refer to Section 7.19 - Notes Manager of the HYSYS User Guide.
- 128. Fluid Package 2-83 2-83 Fluid Package property view. You can now continue to supply data for the other components, if you want. The properties that you have specified to be calculated with the Tabular package carry through into the Flowsheet. 2.4.8 Notes Tab The Notes tab allows you to provide documentation that is stored with the Fluid Package. When you export a Fluid Package, any Notes associated with it are also exported. When you want to import a Fluid Package at a later date, the Notes tab allows you to view information about the Fluid Package.
- 129. 2-84 COMThermo Property View 2-84 2.5 COMThermo Property View The Fluid Package COMThermo property view can be accessed by selecting the COMThermo checkbox in the Advanced Thermodynamics group. COMThermo consists of eight tabs and is based on the COMThermo thermodynamics framework. These tabs include information pertaining to the particular fluid package selected for the case. When you create a new fluid package and select the COMThermo radio button the Set Up property view appears as shown below. Figure 2.57 Removes the Fluid Package from the case. You must confirm that you want to delete the Fluid Package. You can input a name for the Fluid Package in this cell. The property packages selected for the vapor and liquid phases are shown in this status bar. Select the button to edit properties at the fluid package level.
- 130. Fluid Package 2-85 2-85 2.5.1 Set Up Tab The Set Up tab contains the Model Selection, Model Phase, Model Options, Extended Setup, Advanced Thermodynamics, and Component List Selection groups for the Fluid Package property view in COMThermo. After a Model is selected, Properties and Method options are displayed in the Model Options group. The properties and methods that are displayed are dependent on the selected Model. The following sections provide an overview of the various models, as well as details on the various groups that appear on the Set Up tab. Figure 2.58 Information on Property and calculation Methods depending on the Model selected. Use the drop- down list to select alternative calculation methods. Select the Vapor or Liquid Model Phase using the radio buttons. Select a Component List here. It is not recommended to use the Master Component List. Additional Information on the Model selected. Select a flash calculation method here. The buttons below are used to setup the extended custom property package and extended flash. Select a property model for the vapor and liquid phase.
- 131. 2-86 COMThermo Property View 2-86 Model Selection In the Model Selection group, you have access to the list of default property models that are available in HYSYS- COMThermo. The availability of the models depends on the Vapour or Liquid Model Phase selected for your system. Using the radio buttons, the models are filtered for vapor and liquid models. A model for the vapor and liquid phase is required and displayed in the Property Pkg status bar. * Described in the following sections. Equations of State Equations of state are used to model the behaviour of single, two, and three phase systems. For oil, gas and petrochemical applications, the Peng Robinson Equation of State is generally the recommended property model. It rigorously solves most single phase, two phase and three-phase systems with a high degree of efficiency and reliability. Object Description Vapor Phase The Vapor Phase contains a list of Equations of State* used to model the vapor phase in the Model Selection Group. Liquid Phase The Liquid Phase contains a list of the various Equations of State*, Activity Models*, and semi-empirical methods (Chao Seader & Grayson Streed) to characterize the liquid phase of a chemical system. To create or add property packages and properties, refer to the COMThermo online help in the development kit. For detailed information on COMThermo Models that are available in HYSYS, refer to the Aspen COMThermo Reference Guide. Refer to the Aspen COMThermo Reference Guide for more detailed information on the available Equations of State.
- 132. Fluid Package 2-87 2-87 Hyprotech's enhancements to this equation of state (HysysPR), enable it to be accurate for a variety of systems over a wide range of conditions. The equation of state methods and their specific applications are described below: EOS Description Available for Ideal Gas PV=nRT can be used to model the Vapor Phase but is only suggested for ideal systems under moderate conditions. Vapor Phase only PR Peng- Robinson This model is ideal for VLE calculations as well as calculating liquid densities for hydrocarbon systems. However, in situations where highly non- ideal systems are encountered, the use of Activity models is recommended. Vapor and Liquid Phase HysysPR The HysysPR EOS is similar to the PR EOS with several enhancements to the original PR equation. It extends the range of applicability and better represents the VLE of complex systems. Vapor and Liquid Phase PRSV Peng- Robinson Stryjek-Vera This is a two-fold modification of the PR equation of state that extends the application of the original PR method for moderately non-ideal systems. It provides a better pure component vapor pressure prediction as well as a more flexible mixing rule than Peng robinson. Vapor and Liquid Phase SRK Soave- Redlich- Kwong In many cases it provides comparable results to PR, but its range of application is significantly more limited. This method is not as reliable for non-ideal systems. Vapor and Liquid Phase Braun K10 This model is strictly applicable to heavy hydrocarbon systems at low pressures. The model employs the Braun convergence pressure method, where, given the normal boiling point of a component, the K-value is calculated at system temperature and 10 psia (68.95 kPa). Vapor and Liquid Phase KD Kabadi Danner This model is a modification of the original SRK equation of state, enhanced to improve the vapor- liquid-liquid equilibrium calculations for water- hydrocarbon systems, particularly in dilute regions. Vapor and Liquid Phase Lee-Kesler- Plocker This model is the most accurate general method for non-polar substances and mixtures. Vapor and Liquid Phase Redlich- Kwong The Redlich-Kwong equation generally provides results similar to Peng-Robinson. Several enhancements are made to the PR as described above which make it the preferred equation of state. Vapor Phase only Sour Peng- Robinson Combines the PR equation of state and Wilson's API-Sour Model for handling sour water systems. Vapor and Liquid Phase
- 133. 2-88 COMThermo Property View 2-88 Activity Models Although Equation of State models have proven to be reliable in predicting the properties of most hydrocarbon based fluids over a wide range of operating conditions, their application is limited to primarily non-polar or slightly polar components. Non-ideal systems at low to moderate pressure are best modeled using Activity Models. Activity models only perform calculations for the liquid phase. This requires you to specify a calculation method for the modeling of the vapor phase. The following Activity Models are available for modelling the liquid phase of a system: Virial This model enables you to better model vapor phase fugacities of systems displaying strong vapor phase interactions. Typically this occurs in systems containing carboxylic acids, or compounds that have the tendency to form stable hydrogen bonds in the vapor phase. In these cases, the fugacity coefficient shows large deviations from ideality, even at low or moderate pressures. Vapor only Zudkevitch- Joffee This is a modification of the Redlich Kwong equation of state, which reproduces the pure component vapor pressures as predicted by the Antoine vapor pressure equation. This model is enhanced for better prediction of vapor-liquid equilibrium for hydrocarbon systems, and systems containing Hydrogen. Vapor and Liquid Phase Model Description Ideal Solution Assumes the volume change due to mixing is zero. This model is more commonly used for solutions comprised of molecules not too different in size and of the same chemical nature. Regular Solution This model eliminates the excess entropy when a solution is mixed at constant temperature and volume. The model is recommended for non-polar components in which the molecules do not differ greatly in size. By the attraction of intermolecular forces, the excess Gibbs energy may be determined. NRTL This is an extension of the Wilson equation. It uses statistical mechanics and the liquid cell theory to represent the liquid structure. It is capable of representing VLE, LLE, and VLLE phase behaviour. EOS Description Available for Refer to the Aspen COMThermo Reference Guide for more detailed information on the available Activity models.
- 134. Fluid Package 2-89 2-89 General NRTL This variation of the NRTL model uses five parameters and is more flexible then the NRTL model. The following equation format is used for the equation parameters ( ): Apply this model to systems: • with a wide boiling point range between components. • where you require simultaneous solution of VLE and LLE, and there exists a wide boiling point or concentration range between components. UNIQUAC Uses statistical mechanics and the quasi-chemical theory of Guggenheim to represent the liquid structure. The equation is capable of representing LLE, VLE, and VLLE with accuracy comparable to the NRTL equation, but without the need for a non-randomness factor. Wilson First activity coefficient equation to use the local composition model to derive the Gibbs Excess energy expression. It offers a thermodynamically consistent approach to predicting multi-component behaviour from regressed binary equilibrium data. However the Wilson model cannot be used for systems with two liquid phases. Chien-Null Provides consistent framework for applying existing Activity Models on a binary by binary basis. It allows you to select the best Activity Model for each pair in your case. Margules This was the first Gibbs excess energy representation developed. The equation does not have any theoretical basis, but is useful for quick estimates and data interpolation. NRTL This is an extension of the Wilson equation. It uses statistical mechanics and the liquid cell theory to represent the liquid structure. It is capable of representing VLE, LLE and VLLE phase behaviour. Van Laar This equation fits many systems quite well, particularly for LLE component distributions. It can be used for systems that exhibit positive or negative deviations from Raoult’s Law; however, it cannot predict maxima or minima in the activity coefficient. Therefore it generally performs poorly for systems with halogenated hydrocarbons and alcohols. UNIFAC VLE/ LLE Both UNIFAC VLE and UNIFAC LLE use the solution of atomic groups model in which existing phase equilibrium data for individual atomic groups is used to predict the phase equilibria of system of groups for which there is no data. The group data is stored in specially developed interaction parameter matrices for both VLE and LLE property packages. Model Description τ and α τ ij Aij Bij T ------ Cij T 2 ------ - FijT Gij T ln + + + + = αij α1ij α2ijT + =
- 135. 2-90 COMThermo Property View 2-90 Vapor Pressure Models Vapor pressure K-value models may be used for ideal mixtures at low pressures. Ideal mixtures include hydrocarbon systems and mixtures such as ketones and alcohols, where the liquid phase behaviour is approximately ideal. The Vapour Pressure models may also be used as a first approximation for non-ideal systems. Chao Seader & Grayson Streed Models The Chao Seader and Grayson Streed methods are older, semi- empirical methods. The Grayson Streed correlation is an extension of the Chao Seader method with special emphasis on hydrogen. Only the equilibrium data produced by these correlations is used by HYSYS. The Lee-Kesler method is used for liquid and vapor enthalpies and entropies. Models Description Antoine This model is applicable for low pressure systems that behave ideally. Braun K10 This model is strictly applicable to heavy hydrocarbon systems at low pressures. The model employs the Braun convergence pressure method, where, given the normal boiling point of a component, the K-value is calculated at system temperature and 10 psia (68.95 kPa). Esso Tabular This model is strictly applicable to hydrocarbon systems at low pressures. The model employs a modification of the Maxwell-Bonnel vapor pressure model. Model Description Chao Seader Use this method for heavy hydrocarbons, where the pressure is less than 10342 kPa (1500 psia), and temperatures range between -17.78 and 260 °C (0-500 °F). Grayson Streed Recommended for simulating heavy hydrocarbon systems with a high hydrogen content.
- 136. Fluid Package 2-91 2-91 Extended Property Package & Extended Flash The Extended Property Package model allows the user to incorporate existing external property packages with minimum modifications to them. You may setup a number of different property packages using extended methods, which perform different thermodynamic calculations, handle different databases for pure compound properties and/or interaction parameters. Unlike default COMThermo methods, which are stateless, Extended Property Packages can keep and carry state information. State information refers to data such as pure compound and mixture information. In the implementation of an Extended Property Package, the calls between different property calculation routines can be made directly without a need to use COM interfaces. You can mix and match Extended Property methods with COMThermo default property calculation methods. This can be set up in the XML model file. To set up an Extended Property Package two XML model files are required, one for vapor phase and one for liquid phase. Both XML model files must contain the same package name. When selecting an extended package for calculations, the same extended package must be selected for both vapor and liquid phase. The Extended PropPkg Setup button is accessed by selecting the appropriate extended package for both the vapor and liquid model phases. The Extended PropPkg property view is shown The COMThermo online help is located in the COMThermo DK (development kit). You need to setup the COMThermo DK from the installation disk. To set up an Extended Property Package for calculations, you must select the same extended package for both the vapor and liquid phases. Refer to Extended Property Packages and Flash section in the Aspen COMThermo Programmers Guide for detailed information on how to add extended flash and extended property packages.
- 137. 2-92 COMThermo Property View 2-92 below for an example package with ExtPkg as the name of the XML model file. The Extended Property Package Setup includes a description of the package and the setup files. The Add button allows you to browse Setup files for the Extended Property package. The On View button allows you to see and configure the associated property views of your selected extended method. The Extended Flash model provides the user with the capability to use custom flash calculation methods. COMThermo also allows the user to mix and match different flash methods. For example, the user can implement a PV (pressure-vapor fraction) flash in an Extended Flash package and use the existing COMThermo PT flash (pressure-temperature). The flash option can be setup through the Flash Family, which is located in the Model and Flash XML section of the COMThermo online help. A Extended Flash also requires a flash XML model file to setup the flash family name. The Extended Flash Setup button is accessed by selecting the appropriate XML model filename. The Extended Flash Setup property view is shown below for an example flash with ExtendedFlash as the name of the XML model file. Figure 2.59 FIF
- 138. Fluid Package 2-93 2-93 Extended Property Package and Extended Flash can be used together or separately. Advanced Thermodynamics The Advanced Thermodynamics group allows you to model the fluid package based on the COMThermo framework. The Advanced Thermodynamics group contains the following buttons: • Import. Allows you to import an existing COMThermo property package. • Export. Allows you to export a COMThermo based property package. Figure 2.60 Figure 2.61 The imported/exported COMThermo Property package can be used in HYSYS, DISTIL, and COMThermo Workbench.
- 139. 2-94 COMThermo Property View 2-94 • Regression. Allows you to export the fluid package directly into COMThermo Workbench where the fluid package can be manipulated by a broad selection of estimation methods and data regression. Once the regression is complete in the COMThermo Workbench, the regressed fluid package can be imported back to HYSYS. When you click the Regression button the following property view appears: You must have the Conceptual Engineering Suite installed with COMThermo Workbench licensing in order to apply the Regression feature in HYSYS. Figure 2.62 Regression Description Start Regression This button is similar to exporting a fluid package. It allows you to select a file to be opened up in COMThermo Workbench for regression analysis. Load Regression This button is similar to importing a fluid package. A menu of existing packages appear, allowing you to retrieve information from a previously regressed package. Writing Fluid Package A status indicator to indicate that a new fluid package is being generated. Starting COMThermo Workbench A status indicator to indicate that COMThermo Workbench is starting after the fluid package is generated. The regressed fluid package is saved with *.ctf extension along with two default tag files, cc.XML, and pm.XML. You must have all three files saved in the same directory to access the regressed fluid package. Refer to the Thermodynamics Workbench guide of the Conceptual Engineering Suite for more information on COMThermo Workbench.
- 140. Fluid Package 2-95 2-95 Component List Selection You must select a Component List to associate with the current Fluid Package from the Component List Selection drop-down list. Component Lists are stored outside of the Fluid Package Manager in the Components Manager and may contain library, hypothetical, and electrolyte components. To view the Component List property view, click on the View button. Model Options When you have selected a Model, additional property and option methods are displayed on the right side of the Set Up tab in the Model Options group. This information is directly related to the Model and phase selected. The Model options group shows each property and what calculation method is used for that property. It is not recommended for users to attach the Master Component List to any Fluid Package. If only the master list exists, by default a cloned version of the Master Component List is created (called Component List -1). This list is selected initially when a new Fluid Package is created. A model must be selected for both the vapor and liquid phases.
- 141. 2-96 COMThermo Property View 2-96 For example, the Peng-Robinson Model Options for the vapor phase are shown below: The Enthalpy property uses the Peng-Robinson Enthalpy calculation method. The method options which are displayed in red have alternative calculation methods. By placing your cursor on the drop-down list, you have a choice to select the Lee-Kesler calculation method for Enthalpy. The Entropy and Cp properties may also be altered to use the Lee-Kesler calculation methods for the Peng-Robinson EOS. If the property method is altered, it appears in blue. The information in black are default methods for HYSYS- COMThermo. Methods are added in the XML file and then can be seen in the method group for the property selected. Refer to the Wizards & Add-Ins section of the COMThermo online help located in the COMThermo Development Kit to help in adding new properties, property packages, and flash. Figure 2.63 Figure 2.64
- 142. Fluid Package 2-97 2-97 EOS Enthalpy, Entropy & Cp Method Specification With most of the Equations of States, you may have two or three alternative calculation methods for enthalpy, entropy, and Cp. The property calculation methods that are available include: the EOS selected, and the Lee-Kesler method. Once the vapor phase is selected, the liquid phase needs to defined. Activity Model Specifications The Activity Models perform calculations for the liquid phase only. Once a Liquid phase model is selected, the model options group is filled with property methods. The UNIQUAC activity model options are shown below. Methods Description Equation of State With this selection, the enthalpy, entropy, and Cp calculation methods contained within the Equation of State are used. Lee-Kesler The Lee-Kesler method may be used for the calculation of enthalpies, entropies and Cp values. This option results in a combined Property Model, employing the appropriate equation of state for vapor-liquid equilibrium calculations and the Lee-Kesler equation for the calculation of enthalpies and entropies. This method yields comparable results to HYSYS standard equations of state and has identical ranges of applicability. Lee-Kesler enthalpies may be slightly more accurate for heavy hydrocarbon systems, but require more computer resources because a separate model must be solved. Figure 2.65
- 143. 2-98 COMThermo Property View 2-98 With most of the activity models, you have a choice for the calculation method for the standard Ln Fugacity Poynting Correction. By default, the ideal standard Ln Fugacity is set without the Poynting correction and may be changed using the drop-down list. The Poynting factor uses each component’s molar volume (liquid phase) in the calculation of the overall compressibility factor. 2.5.2 Parameters Tab The information and options displayed on the Parameters tab is dependent on the selection of the Property Model. Property models which require additional parameters are displayed here, while others are not. For example, the Chein-Null activity model requires parameters to specify alternative models for binary interaction parameters. The Chien-Null property package is mentioned in this section. Chien Null The Chien Null model provides a consistent framework for applying different activity models on a binary by binary basis. On the Parameters tab, you can specify alternative activity models to be used for each component pair. To aid you in adding customized properties to the model options group. Refer to Wizards & Add- Ins section of the Aspen COMThermo Reference Guide.
- 144. Fluid Package 2-99 2-99 Binary Component Parameters To view the Chein-Null activity models table, CN must be selected as the liquid phase model and the IP Model Name on the binary coefficients tab. All components in the case, including hypotheticals are listed in the table as shown below: The table displays the default property methods provided by COMThermo for each binary pair. The methods are accessed by highlighting a cell and opening the drop-down list. From the list you can specify an Activity Model that COMThermo uses for the calculation of each binary. If Henry's Law is applicable to a component pair, COMThermo selects this as the default property method. When Henry's Law is selected by HYSYS, you cannot modify the model for the binary pair. By default, the Henry and NRTL activity models are selected for the binary pairs in the above property view. You may use the default selections, or set the property package for each binary pair. Remember that the selected method appears in both cells representing that binary. Figure 2.66 The Activity Models available in the drop-down list are: • None Required • Henry • van Laar • Margules • NRTL • Scatchard • Reg Soln • General
- 145. 2-100 COMThermo Property View 2-100 COMThermo may filter the list of options according to the components involved in the binary pair. 2.5.3 Binary Coefficients Tab The Binary Coefficients (Binary Coeffs) tab contains a table which lists the interaction parameters for each component pair. Depending on the property method selected, different estimation methods are available and therefore a different property view may be displayed. All known binary interaction parameters are shown and the unknown interaction parameters are displayed with dashes (--- ). When you exit the Basis Manager, unknown interaction parameters are set to zero. You have the option of overwriting any library interaction parameter values. For all tables on the Binary Coeffs tab, the horizontal components across the top of the table represent the "i" component and the vertical components represent the "j" component.
- 146. Fluid Package 2-101 2-101 Equation of State Interaction Parameter (IP) When you select an EOS model using the IP Model Name drop- down list, the Interaction Parameter model information is displayed on the Binary Coeffs tab as shown in the figure below. The property view contains a table of cells commonly referred to as the Matrix Pane displaying binary interaction coefficients. The top of the property view contains the IP Model Name and Coefficients drop-down lists. Figure 2.67 This information applies to the following Property Models: • Kabadi Danner • Lee-Kesler Plocker • PR • PRSV • Soave Redlich Kwong, SRK • Sour PR • Virial • Zudkevitch Joffee These two radio buttons only appear for the PR and SRK based Equations of State. This is equivalent to no Kij
- 147. 2-102 COMThermo Property View 2-102 The drop-down lists determine which binary iteration coefficients are shown in the table: The list of options for both the Model Name and Coefficients are dependent on the property model (EOS and Activity) selected for the vapor and liquid phase. For example, if you select the Virial EOS as the vapor model, it appears in the IP Model Name drop-down list. You can view and/or edit the virial coefficients for each binary. The following IP model list represents the vapor (Virial) and liquid models (Chien-Null) chosen for the example. Values are only shown in the matrix when the Virial Vapor Phase model is selected on the Set Up tab. You can use the default values suggested by HYSYS or edit these values. Virial coefficients for the pure species are shown along the diagonal of the matrix, while cross coefficients, which are mixture properties between components, are those not along the diagonal. Drop-Down List Description IP Model Name This drop-down list shows all of the binary interaction coefficient matrices associated with the property package selected. Ordinarily there is one, two, or three binary interaction coefficient matrices per property package. Equations of state typically have one matrix, and activity coefficient models typically have two IP matrices, one for ordinary condensable components and the other for non-condensible components The selected Model is displayed in the Matrix Pane. Coefficients This drop-down list shows the type of binary interaction coefficients that are displayed in the Matrix Pane. The naming convention for each binary interaction coefficient type is A1i,j, A2i,j, and so on. This resembles the "aij", "bij" form where i and j are the column and row in the binary interaction coefficient matrix, respectively. Reset COM Parameters This button resets all binary interaction coefficients in the matrix pane to the original HYSYS estimated parameters. Matrix Pane contains a list of the binary interaction coefficients for all binary component pairs in the Fluid Package. The naming convention is as follows: • i column • j row = =
- 148. Fluid Package 2-103 2-103 The numbers that appear in the table are initially calculated by HYSYS and are modifiable. All known binary interaction parameters are displayed, with unknowns displayed as dashes (---). You have the option of overwriting any library value. For all Equation of State parameters (except PRSV), Kij = Kji. If the value is modified for one of the parameters, both cells of the pair automatically update with the same value. In many cases, the library interaction parameters for PRSV do have Kij = Kji, but HYSYS does not force this if you modify one parameter in a binary pair. If you are using PR, SRK or the PR Sour EOS, two radio buttons appear below the Interaction parameters table. Radio Button Description Estimate HC-HC/ Set Non HC-HC to 0.0 This radio button is the default selection. HYSYS provides the estimates for the interaction parameters in the table, setting all non-hydrocarbon pairs to 0. Set All to 0.0 When this is selected, HYSYS sets all interaction parameter values in the table to 0.0.
- 149. 2-104 COMThermo Property View 2-104 Activity Model Interaction Parameters The IP activity model displayed in the IP Model drop-down list is the corresponding liquid phase model selected on the Set Up tab. When you select an Activity Model in the IP Model Name list, the Interaction Parameter model information is displayed on the Binary Coeffs tab, as shown in the figure below. The activity models display the appropriate set of Coefficients for each component pair. For example, Chien-Null allows for 3 sets of coefficients for each component pair, where (A1i,j = ai,j, A2i,j = bi,j and A3i,j = ci,j). Figure 2.68 This information applies to the following liquid property models: • Chien Null • General NRTL • Margules • NRTL • UNIQUAC • van Laar • Wilson Figure 2.69 Refer to the Aspen COMThermo Reference Guide for more information.
- 150. Fluid Package 2-105 2-105 The interaction parameters for each binary pair are displayed; unknown values show as dashes (---). You can overwrite any value. To display a different coefficient matrix pane (i.e., Bij = A2i,j), select the appropriate coefficient using the drop-down list. 2.5.4 Stability Test Tab The StabTest tab allows you to control how phase stability and flash calculations are performed. If you encounter situations where the flash fails or you are suspicious about the results, you can use this option to approach the solution using a different scheme. For multi-phase fluids, there exist multiple false calculated solutions. A false solution exists when convergence occurs for a lower number of phases than exists in the fluid. For example, with a three-phase fluid, there is the correct three-phase solution, at least three false two-phase solutions and multiple false single-phase solutions. A major problem in converging the flash calculation is arriving at the right solution without a prior knowledge of the number of equilibrium phases. HYSYS initially performs a two-phase flash, unless there is strong evidence for three phases. The resulting phases are then tested for their stability. You may reset the binary parameters to their original library values by clicking the Reset COM Parameters button. COMThermo is not optimized for dynamics mode and may result in performance issues if used in dynamics mode.
- 151. 2-106 COMThermo Property View 2-106 The StabTest property view is shown in the figure below. Flash Settings The following options are available in the Flash Settings table: Figure 2.70 Flash Settings Description of Setting MaximumNo. Iterations You can set the maximum number of iterations executed in the flash calculations. The algorithm terminates after it reaches the maximum number of iterations. Absolute Tolerance This is the convergence tolerance of the governing flash equilibrium equations. If the equilibrium equation error is less than the Absolute Tolerance, the flash algorithm is assumed to have converged. Relative Tolerance In addition to the above condition, if the change in the error between iterations is less than the Relative Tolerance, the flash is assumed to have converged. Ignore Composition This is used to detect convergence to the trivial solution (where the compositions in the two phases are identical). If the differences in the compositions of the two phases are all less than the Trivial Composition Tolerance, the result is assumed to be trivial. To avoid discarding azeotropic results, the compressibility (Z) factors for the two phases are computed and compared in the case where the two phases involved are modelled using the same Property Methods (Equation of State Methods).
- 152. Fluid Package 2-107 2-107 Stability Test Parameters The Stability Test Parameters group is described in the following sections. Maximum Phases Allowed You can specify the maximum number of phases allowed. If the maximum is set to 2, the stability test terminates after a 2- phase flash. Occasionally, you may still get three phases, as the algorithm may attempt to start directly with the 3-phase flash. Note that if the true solution has two phases and the maximum phases allowed is set to two, there is still no guarantee that the correct solution is reached. For instance, for binary mixtures around the azeotropic point, the correct solution may be liquid- liquid equilibrium, but the algorithm may incorrectly converge to vapor-liquid equilibrium. The Stability scheme used is proposed by Michelson(1980a). In the Method group, you can choose the method for performing the stability test calculations by selecting one of the radio buttons: Radio Button Description None No stability test is performed. Low Uses a default set of Phases/Components to Initiate the Stability Test. The following methods are used: Deleted Phase, Wilson’s Equation and Component Initiation (Water). Only the water component (if it is part of your Fluid Package) is "introduced". Medium In addition to those methods used for the Low method, the Average of Existing and Ideal Gas methods are also included. As well, the heaviest and the lightest components in the fluid are "introduced" using the Component Initiation method. All All Phase Initiation methods are utilized, and all components are introduced using the Component Initiation method.
- 153. 2-108 COMThermo Property View 2-108 Secant Method Flash Setting The Secant Method Flash Setting group is shown below. The settings that are available for the Secant Method Flash are shown in the following table. Phase Mole Fraction Tolerance The phase fraction tolerance is used whenever a vapor fraction is given along with a temperature or pressure for the secant method flash. HYSYS guesses a temperature or pressure depending on which variable is required and predicts a new vapor fraction. The calculation terminates when the vapor fraction is within the tolerance range and the flash is converged. Figure 2.71 Temperature & Pressure Settings Description Default The default or initial value. low_bound The lower or minimum bound for the secant method search. up_bound The upper or maximum bound for the secant method search. maxInc The maximum increment or initial step size for the secant temperature search. The logarithm of pressure is used as the primary variable for the pressure search, thus an initial pressure multiplier is used as the pressure increment. tolerance The tolerance during the secant temperature and pressure search. It is used mainly by the backup flashes.
- 154. Fluid Package 2-109 2-109 Enthalpy Tolerance Different combinations may be used to flash. If the enthalpy is given, HYSYS guesses a temperature or pressure depending on which one is required and predicts a new enthalpy until the flash is converged within the tolerance specified. Entropy Tolerance Different combinations may be used to flash. If the entropy is given, HYSYS guesses a temperature or pressure depending on which one is required and predicts a new entropy until the flash is converged within the tolerance specified. 2.5.5 Reactions Tab The COMThermo Rxns tab is the same as the traditional HYSYS property view. See Section 2.4.6 - Reactions Tab. 2.5.6 Notes Tab See traditional HYSYS thermodynamics Section 2.4.8 - Notes Tab. 2.6 References 1 Wong, D. S. H., Sandler, S. I., “A Theoretically Correct Mixing Rule for Cubic Equations of State”, A.I.Ch.E. Journal, 38, No. 5, p.671 (1992) 2 Twu, H.C. and Bulls, J.W., "Viscosity Blending Tested", Hydrocarbon Processing, April 1981. 3 Ely, J.F. and Hanley, H.J.M., "A Computer Program for the Prediction of Viscosity and Thermal Conductivity in Hydrocarbon Mixtures", NBS Technical Note 1039.
- 156. Hypotheticals 3-1 3-1 3 Hypotheticals 3.1 Introduction................................................................................... 3 3.2 Hypo Manager................................................................................ 4 3.3 Adding a Hypothetical - Example ................................................... 5 3.3.1 Creating the Ethanol Hypo.........................................................6 3.3.2 Hypo/Library Component Comparison ....................................... 11 3.4 Creating a Hypo Group................................................................. 13 3.4.1 Hypo Group Property View....................................................... 13 3.4.2 Supplying Basic Information .................................................... 17 3.4.3 UNIFAC Structure................................................................... 23 3.5 Hypothetical Component Property View....................................... 26 3.5.1 ID Tab .................................................................................. 28 3.5.2 Critical Tab ............................................................................ 29 3.5.3 Point Tab............................................................................... 30 3.5.4 TDep Tab .............................................................................. 32 3.6 Solid Hypotheticals ...................................................................... 36 3.6.1 ID Tab .................................................................................. 36 3.6.2 Props Tab.............................................................................. 37 3.6.3 Point Tab............................................................................... 39 3.6.4 TDep Tab .............................................................................. 40 3.6.5 PSD Tab................................................................................ 41 3.7 Cloning Library Components ........................................................ 42 3.7.1 Converting a Library Component to a Hypo................................ 43
- 157. 3-2 Hypotheticals 3-2 3.8 Hypo Controls...............................................................................44 3.8.1 Viewing Groups ......................................................................44 3.8.2 Moving Hypos.........................................................................45 3.9 References....................................................................................45
- 158. Hypotheticals 3-3 3-3 3.1 Introduction HYSYS allows you to create non-library or Hypothetical components from the Hypo Manager. Hypothetical components can be pure components, defined mixtures, undefined mixtures, or solids. You can also convert/clone HYSYS library components into Hypotheticals, which allow you to modify the library values. The Hypo Manager is located on the Hypotheticals tab of the Simulation Basis Manager. It can also be accessed via the Hypo manager button from the Components tab under hypothetical components. A wide selection of estimation methods are provided for the various Hypo groups (hydrocarbons, alcohols, etc.) to ensure the best representation of behaviour for the Hypothetical component in the simulation. In addition, methods are provided for estimating the interaction binaries between hypotheticals and library components. You can also use Hypotheticals with the Tabular Package, as well as in Reactions. In HYSYS, Hypothetical components exist independent of the Fluid Package. When a Hypothetical is created, it is placed in a Hypo Group. From the Hypo Manager, you can create new Hypo Groups and move Hypothetical components within the Hypo Groups. Hypo Groups can also be imported and exported, thus making them available to any simulation case. Since Hypothetical components are not exclusively associated with a particular Fluid Package, it is possible for multiple Fluid Packages to share Hypotheticals. In other words, you only need to create a Hypothetical once, and it can be used in any Fluid Package throughout the case.
- 159. 3-4 Hypo Manager 3-4 3.2 Hypo Manager By selecting the Hypotheticals tab from the Simulation Basis Manager, the following property view appears: The left side of the property view is the Hypothetical Groups group. The lists all the Hypothetical groups currently installed in the simulation. The available commands for this group (accessed using the associated buttons) are as follows: Figure 3.1 You can Import and Export Hypothetical groups, allowing you to use defined hypotheticals in any future simulation Hypothetical groups and individual hypothetical components can be installed in more than one Fluid Package. Button Description View Accesses the Hypo Group property view for the selected group. Add Adds a Hypothetical Group to the present case. Delete Deletes the selected Hypothetical Group from the case.
- 160. Hypotheticals 3-5 3-5 The right side of the property view displays the Hypothetical Quick Reference group. This group includes all Hypotheticals currently installed in the Basis Environment (Hypo Name column) along with their associated Hypo Groups (Group Name column). The available buttons within this group are described below: 3.3 Adding a Hypothetical - Example In this example, a hypothetical Ethanol component is defined, and the results to the library Ethanol component using the Wilson property package are compared. The ethanol hypothetical component is defined as having a boiling point of 78.25 °C and a specific gravity of 0.789. Translocate Searches through all of the hypothetical components in the case and if there are duplicates HYSYS replaces them and puts all the duplicates in a separate Hypo group which then can be deleted. This is intended for use when large cases have had large numbers of templates/fluid packages imported and there are lots of repeated hypotheticals in the case. Import Imports a Hypothetical Group from disk. Export Exports the selected Hypothetical Group and saves it to a file, so that it can be retrieved at a later time. Button Description View Hypo Access the property view for the highlighted Hypothetical. View Group Access the Hypo Group property view for the highlighted Hypothetical. Move Hypos Move Hypotheticals from one Hypo Group to another. Clone Comps Use a copy of a selected library components as the basis for defining a Hypothetical. Button Description
- 161. 3-6 Adding a Hypothetical - Example 3-6 3.3.1 Creating the Ethanol Hypo To create a ethanol hypo, follow the steps outlined below: 1. Open a new case in HYSYS. 2. Select Tools | Preferences in the menu bar to open the Session Preferences property view. 3. In the Session Preferences property view, click the Variables tab and select the Units page. 4. Select SI as the units for this example case. 5. In the Simulation Basis Manager property view, select the Hypotheticals tab. 6. From the Hypothetical Groups group, click the Add button to create a new Hypothetical Group. HYSYS automatically names this group HypoGroup1. You can change the name later, if desired. When you add a new Hypothetical Group, HYSYS automatically opens the Hypo Group property view, where you add and define the Hypothetical component(s) for the group. You must install a Hypothetical Group before you can install a Hypo component.
- 162. Hypotheticals 3-7 3-7 7. On the Hypo Group property view, enter HypoAlcohol as the new Group Name. Notice that the HYSYS default in the Component Class list is Hydrocarbon. 8. In the Component Class drop-down list, select Alcohol. 9. Now, install a Hypothetical component. From the Individual Hypo Controls group, click the Add Hypo button. This adds a Hypothetical component and automatically names it Hypo20000*. 10. Enter a new name for this component by selecting the Name cell typing HypoEtoh. 11. In the NBP cell, enter the normal boiling point of the component as 78.25°C. 12. The specific gravity for the hypothetical component is 0.789. In the Liq Density cell, enter 0.789 and select the SG_H2O60api units. A liquid density of 787.41 kg/m3 is calculated by HYSYS. Figure 3.2 Figure 3.3
- 163. 3-8 Adding a Hypothetical - Example 3-8 13. Although HYSYS could estimate the unknown properties for HypoEtoh with only the NBP and Liquid Density, more accurate results are obtained if the component structure is supplied. Click the UNIFAC button to access the UNIFAC Component Builder. 14. The chemical formula of ethanol is C2H5OH, and it is comprised of the groups CH3, CH2, and OH. Highlight CH3 in the Available UNIFAC Groups list. It is the first selection in the list. 15. Click the Add Group(s) button. Notice that a “1” is displayed under Sub Group in the UNIFAC Structure group. By default, HYSYS assigns the value “1” to the How Many cell. The number is valid, since this is the number of CH3 groups required. The number of Free Bonds has increased to 1 with the addition of the CH3 Sub Group. 16. To add the CH2 group, highlight it in the Available UNIFAC Groups list (it is the second in the list) and click the Add Group(s) button. Again, only 1 Sub Group is required, so the default is acceptable. Figure 3.4
- 164. Hypotheticals 3-9 3-9 17. Since the OH group is not immediately visible in the list of Available UNIFAC Groups, a different approach is taken. In the UNIFAC Structure input field, type OH at the end of the existing structure (CH3CH2) and press ENTER. Once the UNIFAC Structure is complete, HYSYS calculates the UNIFAC Base and Critical Properties. 18. Click the Close icon to close the property view and return to the Hypo Group property view. HYSYS can now use the existing information (NBP, Liquid Density and UNIFAC structure) to estimate the remaining properties for the Hypothetical component. Figure 3.5 Notice that the Incomplete status message is replaced with Complete when there are 0 Free Bonds. Property Estimation Methods are explained in Section 3.4.2 - Supplying Basic Information.
- 165. 3-10 Adding a Hypothetical - Example 3-10 19. We will now examine the Estimation Method that HYSYS uses. Click the Estimation Methods button to access the Property Estimation property view. If you want, you can change the estimation method for any property. In this example, all properties use the Default Method. 20. Click the Close icon to return to the Hypo Group property view. 21. Click the Estimate Unknown Props button and HYSYS uses the currently specified methods to estimate the unknown properties for the component. The molecular weight for the hypothetical is the same as the molecular weight for ethanol, 46.07, since the UNIFAC structure is used for the Hypo component. Figure 3.6 Figure 3.7 Remember that specified values are displayed in blue, and HYSYS estimated values are displayed in red.
- 166. Hypotheticals 3-11 3-11 22. You can examine all properties for the Hypo through its property view. Double-click on the Hypothetical component name, HypoEtoh, to access the Component property view. 23. Click the Close icon to return to the Hypo Group property view. 24. Click the Close icon and HYSYS returns you to the Hypotheticals tab of the Simulation Basis Manager. The Ethanol Hypothetical has is created. 3.3.2 Hypo/Library Component Comparison To conclude, compare the ethanol hypothetical to the ethanol library component. Go to the Simulation Basis Manager: 1. On the Fluid Pkgs tab, click the Add button to install the new Fluid Package. 2. On the Set Up tab, select Wilson as the Property Package and close the fluid package property view. 3. Move to the Components tab and add Ethanol to the Selected Component List by highlighting the Components page in the Add Component group. Figure 3.8 For further information regarding the Property View, refer to Section 3.5 - Hypothetical Component Property View.
- 167. 3-12 Adding a Hypothetical - Example 3-12 4. From the Available Hypo Components group, highlight the HypoEtoh* component and click the Add Hypo button from the Hypothetical page. 5. Move to the Binary Coeffs tab in the fluid package property view and click the Unknowns Only button in the Coeff Estimation group. 6. Close the Fluid Package property view. 7. Click the Enter Simulation Environment button to enter the Main Environment. 8. In the Workbook, create the stream Pure. Enter a vapour fraction of 0 and a pressure of 1 atm for the stream on the Material Streams tab of the workbook. Move to the Compositions tab an enter 1 for the mole fraction of Ethanol, and 0 for HypoEtoh*. 9. Now create a second stream, Hypo. Enter a vapour fraction of 0 and a pressure of 1 atm for the stream. The mole fraction of HypoEtoh* is 1, and that for Ethanol is 0. When you have specified these two streams, HYSYS calculates the bubble point temperature for each stream. The Conditions tab of the property view for each stream is shown below. Figure 3.9
- 168. Hypotheticals 3-13 3-13 3.4 Creating a Hypo Group When defining a hypothetical, there is no set procedure. The following is a suggested sequence in which you can follow: 1. Create the Hypo Group. 2. Select the Component Class for the Hypo Group. 3. Set the Estimation Methods for the Group (optional). 4. Install the Hypotheticals. 5. Supply all information that you have for the Hypo. 6. Supply a UNIFAC structure for the Hypo (optional). 7. Estimate the Properties for the Hypo. 3.4.1 Hypo Group Property View As mentioned in the Hypothetical example, you add a Hypo Group by clicking the Add button from the Hypotheticals tab of the Simulation Basis Manager. This opens the Hypo Group property view, which contains two groups (Hypo Group Controls and Individual Hypo Controls), and a table of estimated or known property values. Figure 3.10 For more information, refer to Section 3.4.1 - Hypo Group Property View. For more information, refer to Section 3.4.2 - Supplying Basic Information. For more information, refer to Section 3.4.3 - UNIFAC Structure.
- 169. 3-14 Creating a Hypo Group 3-14 Hypo Group Controls The Hypo group contains the following options: Option Description Group Name Displays the current name for the Hypothetical Group. HYSYS provides a default name, but you can change this to a more descriptive name. Individual Hypothetical components must reside inside of a Hypothetical group. Component Class Every component in a Hypo Group must be of a common Component Class. The options are accessed using the drop- down list attached to the input cell. There is a wide selection of available Classes, which allows for better estimation of the component properties. HYSYS, by default, selects the Component Class to be Hydrocarbon. Prior to installing any components, select the Component Class. Estimation Methods Access the Property Estimation property view, from which you can select an estimation method for each property. The selected estimation methods apply to all Hypotheticals in the Hypo Group. Estimate Unknown Props This button estimates the unknown properties for all Hypothetical components within the Hypo Group, using the methods chosen on the Property Estimation property view. Clone Library Comps HYSYS allows you to convert library components into hypothetical components. For more information, refer to Section 3.7 - Cloning Library Components. Notes Allows you to supply Notes and Descriptions for the Hypothetical Group. This is useful when exporting Hypo groups, because when you import them later, the description appears along with the Hypo group name. For the Component Class, there are varying levels of specificity. For example, under Alcohol, you can specify sub- classes of alcohols, such as Aliphatic, Aromatic, Cyclo and Poly. Using a stricter degree of component type assists HYSYS in choosing appropriate estimation methods; however, it forces all components to be calculated using the same method. If you want to mix component classes (i.e., both Aliphatic and Aromatic inside the same Hypo Group), select the more general Component Class of Alcohol. For more information, refer to Section 3.4.2 - Supplying Basic Information.
- 170. Hypotheticals 3-15 3-15 Individual Hypo Controls The Individual Hypo Controls group at the bottom of the Hypo Group property view contains buttons for manipulating the Hypotheticals within the Hypo Group and two radio buttons for switching between Base Properties and Vapour Pressure data. The table displayed in the middle section of the Hypo Group property view, displays either the Base Properties or the Vapour Pressure properties, depending on which radio button is selected. You can add a new Hypo component in either the Base Properties or Vapour Pressure property view. Button Description View Displays the Property View for the highlighted hypothetical component. The View button will not be available unless a hypothetical is present in the case. Add Hypo Automatically adds a new hypothetical component to the group. HYSYS places the new Hypo in the table, and names it according to the default naming convention (set in the Session Preferences). Add Solid Automatically adds a new solid hypothetical component to the group. HYSYS places the new Hypo in the table, and names it according to the default naming convention (set in the Session Preferences). Delete Deletes the highlighted hypothetical component from the case. After deleting a Hypo it cannot be recovered. The Delete button will not be available unless a hypothetical is present in the case. UNIFAC Opens the UNIFAC Component Builder, from which you can provide the UNIFAC Structure for the highlighted hypothetical component. The UNIFAC button will not be available unless a hypothetical is present in the case.
- 171. 3-16 Creating a Hypo Group 3-16 Base Properties The Base Properties for each Hypothetical are shown on the Hypo Group property view when the Base Properties radio button is selected. The table lists each Hypothetical along with the following Base Properties: Figure 3.11 These properties are the same as those shown on the Critical tab of the Hypo component property view. Base Property Description NBP Normal boiling point MW Molecular weight Liq Density Liquid density Tc Critical temperature Pc Critical pressure Vc Critical volume Acentricity Acentric factor Individual Base Properties are supplied by selecting the appropriate cell. Use the drop-down list to select the units within the cell.
- 172. Hypotheticals 3-17 3-17 Vapour Pressure Properties The Vapour Pressure table displays the temperature range and Antoine Coefficients for the hypothetical components. Also shown are the pressure and temperature units on which the equation is based and the form of the equation. The values shown on this property view are also available on the TDep tab of the individual Hypo property view. Use the horizontal scroll bar to view Coeff E and Coeff F. 3.4.2 Supplying Basic Information Before HYSYS can estimate the properties for a hypothetical, some information about the Hypo must be provided. For the estimation, you must supply a minimum amount of information and select the estimation methods to be used. Figure 3.12
- 173. 3-18 Creating a Hypo Group 3-18 Minimum Information Required If the hypothetical component is defined as a hydrocarbon, the appropriate default correlations can be used to calculate its critical properties or any other missing information. Its interaction parameters are also calculated by HYSYS based on the estimated critical properties. For HYSYS to estimate the component's critical properties, a minimum amount of information must be supplied, as shown in the following table. Estimation Methods Prior to installing any Hypotheticals into a Hypo group, examine the Estimation Methods which HYSYS uses to calculate the unknown properties for a hypothetical component. You can specify a estimation method for each property. Click the Estimation Methods button on the Hypo Group property view. Normal Boiling Point Minimum Required Information < 700 °F (370 °C) Boiling Point > 700 °F (370 °C) Boiling Point and Liquid Density Unknown API & Molecular Weight The more information you can supply, the more accurate the estimations are. Figure 3.13
- 174. Hypotheticals 3-19 3-19 The Estimation Methods that you choose for the Hypo Group apply to all Hypotheticals in that group. There are three groups in the Property Estimation property view and are described below: Group Description View Property to Set Methods For This group lists all the available properties. From the list, choose the property for which you want to set the Estimation Method. Use the scroll bar to move through the list. Initially, HYSYS sets all the properties to the Default Method. Estimation Method For Selected Property This drop-down list displays all the available estimation methods for the highlighted property. Depending on the property, the drop-down list differs. The list shown here is a partial display of estimation methods for Critical Temperature. Variables Affected by this Estimate This group lists all the variables that are affected by the selected estimation method. The list changes depending on the property selected. For example, when you select an estimation method for Critical Temperature, you are not only affecting the critical temperature, but also the properties which use critical temperature in their estimation or calculation.
- 175. 3-20 Creating a Hypo Group 3-20 The following table individually lists each Property, its Default Method, its Available Estimation Methods and the Variables Affected by estimating the Property. It is understood that each property can have Do Not Estimate selected as its Estimation Method, so this option does not appear in the Available Methods list. Property Default Method Available Methods Variables Affected Critical Temperature • if ρLIQ > 1067 kg/m3 or NBP > 800 K, Lee- Kesler is used • if NBP < 548.16 K and ρLIQ<850 kg/m3, Bergman is used • all other cases, Cavett is used Aspen, Bergman, Cavett, Chen Hu, Eaton Porter, Edmister, Group Contribution, Lee Kesler, Mathur, Meissner Redding, Nokay, Riazi Dauber, Roess, PennState, Standing, Twu • Critical Temperature • Standard Liquid Density • COSTALD Variables • Viscosity Thetas Critical Pressure • if ρLIQ > 1067 kg/m3 or NBP > 800 K, Lee- Kesler is used • if NBP < 548.16 K and ρLIQ <850 kg/m3 , Bergman is used • all other cases, Cavett is used Aspen, Bergman, Cavett, Edmister, Group Contribution, Lee Kesler, Lydersen, Mathur, PennState, Riazi Daubert, Rowe, Standing, Twu • Critical Pressure • Standard Liquid Density • COSTALD Variables • Viscosity Thetas Critical Volume • Pitzer Group Contribution, Pitzer, Twu • Critical Volume • Standard Liquid Density • COSTALD Variables • Viscosity Thetas Acentricity • for Hydrocarbon, Lee- Kesler is used • all other cases, Pitzer is used Bergman, Edmister, Lee Kesler, Pitzer, Pitzer Curl, Robinson Peng • w • ωGs • Standard Liquid Density • COSTALD Variables • Viscosity Thetas Molecular Weight • if NBP < 155 °F, Bergman is used • all other cases, Lee- Kesler is used API, Aspen, Aspen Leastq, Bergman, Hariu Sage, Katz Firoozabadi, Katz Nokay, Lee Kesler, PennState, Riazi Daubert, Robinson Peng, Twu, Whitson • Molecular Weight Normal Boiling Point • Hyprotech proprietary method Twu • Normal Boiling Point • Viscosity Thetas Vapour Pressure • for Hydrocarbon, Lee- Kesler is used • all other cases, Riedel is used Gomez Thodos, Lee Kesler • Antoine Coefficient • PRSV_kappa
- 176. Hypotheticals 3-21 3-21 Liquid Density • Yen-Woods Bergman, BergmanPNA, Chueh Prausnitz, Gunn Yamada, Hariu Sage, Katz Firuzabadi, Lee Kesler, Twu, Whitson, Yarborough, Yen Woods • Standard liquid Density • COSTALD Variables Ideal Gas Enthalpy • Cavett Cavett, Falon Watson, Group Contribution, Lee Kesler, Modified Lee Kesler, • Ideal H Coefficient Heat of Formation • for chemical structure defined in UNIFAC groups, Joback is used • all other cases, this formula is used: Group Contribution • Heat of Formation • Heat of Combustion Ideal Gas Gibbs Energy • Hyprotech proprietary method Group Contribution • Gibbs Coefficient Heat of Vapourizatio n • Two Reference Fluid (using benzene and carbazole) Chen, Pitzer, Riedel, Two Reference1, Vetere • Cavett Variables Liquid Viscosity • for non-Hydorcarbon or NBP < 270 K Letsou Stiel is used • for Hydorcarbon and NBP < 335 K, NBS viscosity is used • all other cases, Twu is used Hyprotech Proprietary, Letsou Stiel • Viscosity Thetas Surface Tension • Brock Bird Brock Bird, Gray, Hankin, Sprow Prausnitz • Tabular Variables Radius of Gyration • Hyprotech proprietary method Default Only • Critical Temperature • Critical Pressure • Normal Boiling Point • Molecular Weight • Standard Liquid Density Property Default Method Available Methods Variables Affected Hform octane ( ) MW ⋅ MW octane ( ) ---------------------------------------------------- -
- 177. 3-22 Creating a Hypo Group 3-22 In defining Hypothetical components, there are some properties for which you cannot select the estimation method. HYSYS determines the proper method based on information you have provided. The following table lists these properties and their respective default methods: Property Default Estimation Method Liquid Enthalpy • The previously calculated Liquid Heat Capacity is used. Vapour Enthalpy • Liquid Enthalpy + Enthalpy of Vapourization Chao Seader Molar Volume • If Tc > 300 K, Molar Volume from COSTALD @ 25 °C and 1 atm is used • all other cases, ρLIQ @ 60 °F is used Chao Seader Acentricity • component acentric factor is used Chao Seader Solubility Parameter • If Tc > 300K, Watson type Enthalpy of Vaporization is used • all other cases, values of 5.0 are used Cavett Parameter • Two Reference Fluid1 method (using benzene and carbazole) Dipole Moment • No estimation method available, sets value equal to zero. Enthalpy of Combustion • No estimation method available, sets value to <empty>. COSTALD Characteristic Volume • If NBP < 155 °F, Bergman is used • all other cases, Katz-Firoozabadi is used Liquid Viscosity Coefficients A and B • For non-Hydrocarbon or NBP < 270 K, Letsou Stiel is used • for Hydrocarbon and NBP < 335 K, NBS viscosity is used • all other cases, Twu is used. Vapour Viscosity • Chung PRSV Kappa1 • Vapour Pressure from Antoine’s Equation Kfactor1 • Vapour Pressure from Antoine’s Equation
- 178. Hypotheticals 3-23 3-23 3.4.3 UNIFAC Structure Most of the estimation methods require a UNIFAC structure for some aspect of the estimation. It may be that either the property itself, or some other property that is affected by the estimation procedure requires the chemical structure. The UNIFAC structure is supplied through the UNIFAC Component Builder. This can either be accessed by clicking the UNIFAC button in the Hypo Group property view, or by clicking the Structure Builder button on the ID tab of the Hypothetical component property view. Whichever route is taken, the following property view appears: The UNIFAC Component Builder property view is made up of the following objects: Figure 3.14 Objects Description UNIFAC Structure Group Displays the Type and Number of Sub Groups in the UNIFAC Structure. This group makes reference to both the UNIFAC Structure group (the table of cells) and the UNIFAC Structure entry field. Add Group(s) Adds the currently selected Sub Group from the Available UNIFAC Groups list box to the UNIFAC Structure group. Delete Group Deletes the currently selected Sub Group in the UNIFAC Structure group.
- 179. 3-24 Creating a Hypo Group 3-24 The procedure for supplying the UNIFAC structure is to highlight the Sub Group(s) in the Available UNIFAC Groups column and select the Add Group(s) button. Additional sub groups can be accessed in the list by using the Scroll Bar. As you add sub groups, HYSYS displays the number of Free Bonds available. This is zero when the UNIFAC structure is complete. When you have supplied enough groups to satisfy the bond structure, the status message changes to Complete (with a green background). As you specify groups, the UNIFAC Calculated Base Properties and UNIFAC Calculated Critical Properties are automatically updated based on the new structure. Free Bonds Displays the number of free bonds available in the present UNIFAC Structure. This is 0 when the structure is complete. Status Bar This bar is found in the centre of the property view. It indicates the present status of the UNIFAC Structure. You see either Incomplete in red, Complete in green, or Multi-Molecules in yellow. Available UNIFAC Groups Contains all the available UNIFAC component sub groups. UNIFAC Structure field Displays the chemical structure of the molecule you are building. UNIFAC Calculated Base Properties Displays properties such as Molecular Weight, the UNQUAC R parameter, and the UNIQUAC Q parameter for a UNIFAC Structure with at least 1 sub group. UNIFAC Calculated Critical Properties Displays the critical properties for a UNIFAC Structure with at least 1 sub group. Objects Description
- 180. Hypotheticals 3-25 3-25 There are three methods available for adding Sub Groups to the UNIFAC Structure: HYSYS automatically calculates Base Properties and Critical Properties using the currently supplied structure. Sub Group Description Highlighting the Sub Group The list of Available UNIFAC Groups displays all the sub groups. Notice that CH3 is the first selection in this list. You can use the scroll bars to move through the list until you find the group you need. When you find the correct Sub Group, highlight it, and click the Add Group(s) button. The sub group now appears in the UNIFAC Structure group. You can highlight more than one sub group, and add all at the same time. Using the Sub Group Number Each sub group has a number associated with it. If you know the number for the sub group you want to add to the UNIFAC Structure, move the active location to the Sub Group column of the UNIFAC Structure group. Enter the number of the Sub Group. HYSYS does not automatically fill in the number of sub groups. Move the active location to the How Many column and type in the number of sub groups required. Notice the difference between the UNIFAC Structure group (the table of cells) and the UNIFAC Structure entry field. Typing in the UNIFAC Structure input field Notice the UNIFAC Structure input field near the bottom of the property view. Any sub groups already installed are listed here. Place the cursor after the last group, and type in the group to install. For example, if we want to add an OH group, type in OH. When you type the sub group in this box, HYSYS automatically adds it to the UNIFAC Structure group. You can add multiples of a Sub Group in the UNIFAC Structure box. Type the number of Sub Groups and the Sub Group name, separated by a space. For example, type 3 CH2 to add three CH2 groups to the UNIFAC structure. NOTE: You cannot add Sub Groups in this way to an existing UNIFAC structure.
- 181. 3-26 Hypothetical Component Property 3-26 3.5 Hypothetical Component Property View Hypotheticals, like library components, have their own property view. Once inside, you can add or modify information, or examine the results of the estimations. You can access the property view for the Hypo component from different property views: View Method of Accessing Hypo Simulation Basis Manager, Hypotheticals Tab All the hypothetical components are displayed in the Hypothetical Quick Reference group. You can either double-click on the component name, or highlight it and click the View Hypo button. Hypo Group All the hypothetical components in the Hypo Group you have chosen to view, are displayed. Either double-click on the Hypo component you want to view, or highlight it and click the View button. Simulation Basis Manager, Components Tab After adding a hypothetical to the Selected Component List group, highlight it and click the View Component button or object inspect its name and select View.
- 182. Hypotheticals 3-27 3-27 The Hypothetical property view is made up of five tabs and are shown below. Some of the tabs have radio buttons for switching between the various properties. When a different radio button is selected, HYSYS redraws the property view with the information appropriate to the item. After you have entered adequate estimation parameters, you can click the Estimate Unknown Properties button to complete the hypothetical estimation. The Edit Properties button allows you to edit properties within the hypocomponent at the component level. The Edit Visc Curve button allows you to recalculate the viscosity coefficients based on the temperature and dynamic viscosity data provided by the user. Throughout the tabs of the property view, information is displayed in red, blue, and black. Values displayed in red are estimated by HYSYS and values displayed in blue are user supplied. Black values represent calculated values or information that you cannot modify (in other words, Family/ Class on the ID tab). Figure 3.15 Refer to Edit Properties in Section 1.2.3 - Manipulating the Selected Components List for more information.
- 183. 3-28 Hypothetical Component Property 3-28 3.5.1 ID Tab The ID tab is the first tab in the Hypo property view. If it is the first time you are entering a Property View, HYSYS places you on this tab. You can supply values directly for any of the component properties, or overwrite values estimated by HYSYS. If you change a specified value, all properties previously estimated using that specification are forgotten. Click the Estimate Unknown Props button to have the properties recalculated. Figure 3.16 If a Structure is already entered, it is displayed here. You can also enter the Structure directly into this cell. Use this button to access the UNIFAC Component Builder and supply the structure of the Hypo.
- 184. Hypotheticals 3-29 3-29 3.5.2 Critical Tab The Critical tab of the property view displays the base and critical properties. This is the same information displayed on the Hypo Group when the Base Properties radio button is selected. You can supply or change the Base Properties on this tab. The property views, shown in Figure 3.17, display the Critical tab before and after the Estimate Unknown Props button is clicked. Notice that since the Normal Boiling Point was less that 370 °C, only the Molecular Weight value was required for this estimation. Figure 3.17 For more information on the Minimum Information required for Property Estimation see Section 3.4.2 - Supplying Basic Information
- 185. 3-30 Hypothetical Component Property 3-30 3.5.3 Point Tab The Point tab displays Additional Point Properties for the hypothetical. There are two radio buttons on the property view, which allow you to toggle between two tables of information are the: • Thermodynamic and Physical Properties • Property Package Molecular Properties Thermodynamic & Physical Properties This property view displays the Thermodynamic and Physical properties for the Hypo. HYSYS estimates these values, based on the base property data entered and the selected estimation methods. Notice that the Heat of Comb field is <empty>. This indicates that HYSYS cannot estimate this value with the given information. HYSYS allows you to input a value for this property. Figure 3.18
- 186. Hypotheticals 3-31 3-31 The viscosity coefficients of A and B are first estimated by HYSYS based on the initial specifications from the Hypo Group property view. If you want to calculate these coefficients, you can override the estimation by clicking the Edit Visc Curve button. This allows you to enter a set of data points of temperature versus dynamic viscosity. There are three buttons available in the Edit Viscosity Curve property view: HYSYS will recalculate the values of the viscosity coefficients based on the data points you just entered. The values of the viscosity coefficients A and B will then change from red to black indicating that they are calculated values. Figure 3.19 Buttons Descriptions OK Allows HYSYS to accept the data to perform the calculations. Delete Clears all the data points in the data table and closes the property view automatically. Cancel Cancels the operation and exit the property view. The data points you entered will not be used in the calculations but these points will be saved in the data table without being cleared so you can make modification later.
- 187. 3-32 Hypothetical Component Property 3-32 Property Package Molecular Props This property view displays the Molecular properties for the Hypo. The values estimated are dependent on the selected estimation method for each property. Some of the fields in this property view are <empty>. This indicates that HYSYS cannot estimate these values with the information given. However, you can specify values for these properties. 3.5.4 TDep Tab The TDep tab displays Temperature Dependent Properties for the hypothetical. There are three radio buttons on the property view, which allow you to toggle between the three different displays of information. The property views available are: • Vapour Enthalpy • Gibbs Free Energy • Vapour Pressure Figure 3.20
- 188. Hypotheticals 3-33 3-33 Vapour Enthalpy The Vapour Enthalpy calculation is performed on a Mass Basis. The reference point for the equation is an ideal gas at 0 K. The units for Mass Vapour Enthalpy and Temperature are kJ/kg and degrees Kelvin, respectively. When required, the Vapour Enthalpy equation is integrated by HYSYS to calculate entropy. Note that if enthalpy coefficients are entered, a constant of integration, g, should be supplied along with the other coefficients. Specify this value in the g coefficient field. Notice that HYSYS has estimated the Minimum and Maximum Temperatures. Below the temperature range are values for the Vapour Enthalpy equation coefficients (from a to g). HYSYS estimates the coefficients, but you may change any of the values. Figure 3.21
- 189. 3-34 Hypothetical Component Property 3-34 Vapour Pressure The Vapour Pressure is calculated using the Modified Antoine equation. HYSYS estimates the Minimum and Maximum Temperature values based on the supplied properties and estimation methods. The units used for Pressure and Temperature are kPa, and degrees Kelvin, respectively. The bottom section of this property view displays the values for each of the Antoine equation coefficients (from a to f). HYSYS estimates the coefficients, however you can modify these values. Figure 3.22
- 190. Hypotheticals 3-35 3-35 Gibbs Free Energy The Gibbs Free Energy calculation uses Enthalpy as its property type and is performed on a Molar Basis. The basis for the equation is ideal gas at 25 °C. HYSYS estimates the Minimum and Maximum Temperature values. The units for Molar Enthalpy and Temperature are kJ/kg mole and degrees Kelvin, respectively. The bottom section of the property view displays the values for each of the Gibbs Free Energy equation coefficients (from a to c). HYSYS estimates the Gibbs Free Energy coefficients if you supply the UNIFAC structure and enter the Ideal Gas Gibbs Free Energy at 25 °C in the a coefficient cell. Figure 3.23
- 191. 3-36 Solid Hypotheticals 3-36 3.6 Solid Hypotheticals Solid Hypotheticals can be added to any Hypo Group, regardless of the Group Type. In the Individual Hypo Controls group of the Hypo Group property view, click the Add Solid button. When you install a solid hypo, you notice that the Base Properties cells on the Hypo Group property view are displayed as <empty>. 3.6.1 ID Tab To define the Solid Hypo, access its property view by highlighting the component name on the Hypo Group property view and clicking the View button. The ID tab of the Solid Component property view is the same as that for other Hypo components except that the User Props tab is replaced by the PSD tab. Note that in this case, the Family/ Class is Alcohol. The Class type has no effect on the values calculated for the solid component. Solids do not take part in VLE calculations, but they do have an effect on heat balance calculations.
- 192. Hypotheticals 3-37 3-37 3.6.2 Props Tab The Props tab displays the basic properties of the component in two groups: • Solid Properties where bulk properties are entered • Coal Analysis where data can be entered on a possible Coal Analysis Figure 3.24
- 193. 3-38 Solid Hypotheticals 3-38 Solid Properties The minimum information that must be supplied includes the Molecular Weight and the Density. The appropriate units can also be specified within the cell as shown below. The other Solid Properties are described below: Coal Analysis You can also provide the results of a Coal Analysis on a percentage basis for the listed components. Figure 3.25 Solid Property Description Diameter Particle diameter, if not supplied this defaults to 1 mm when the remaining properties are estimated. Sphericity Value between zero and one, with one being perfectly spherical. Area/Unit Volume Measure of the surface area of the particle as a function of the particle volume.
- 194. Hypotheticals 3-39 3-39 3.6.3 Point Tab The only information on the Point tab that is relevant to the Solid is the Heat of Combustion and Heat of Formation. This information is only required if you plan on using a Solid component as part of a reaction. Figure 3.26
- 195. 3-40 Solid Hypotheticals 3-40 3.6.4 TDep Tab Since Solid Hypos do not participate in VLE calculations, their vapour pressure information is, by default, set to zero. However, since solid components do affect Heat Balances, the Specific Heat information can either be estimated by HYSYS, or supplied. Figure 3.27 While other Hypotheticals use the Ideal Gas Enthalpy coefficients, solids use the Specific Heat Capacity.
- 196. Hypotheticals 3-41 3-41 3.6.5 PSD Tab The PSD tab displays the particle size distribution for solids. It allows you to specify PSD’s and calculate various mean and modal diameters for the entered PSD. The PSD tab is shown below. Refer to Section 1.2.3 - Manipulating the Selected Components List and see UserProp & PSD Tabs for more information on Particle Size Distribution. Figure 3.28
- 197. 3-42 Cloning Library Components 3-42 3.7 Cloning Library Components You can convert HYSYS library components into Hypotheticals through the Clone Library Comps button on the Hypo Group property view. When you click this button, the Convert Library Comps to Hypothetical Comps property view is displayed. Any of the library components present in the current Fluid Package can be converted to a Hypothetical. This property view is made up of two sections, the Source Components group and the Hypo Groups. Figure 3.29 By using the Add New Hypo Group button, you do not have to return to the Simulation Basis Manager to create a Hypo Group. Object Description Component Lists Allows you to select the component list that contains the library component you want to clone. Available Library Comps Selects the component you want to convert into a hypothetical. Replace ALL Instances If you want to replace the library component with the Hypo in every Fluid Package that contains the library component, select this checkbox. If you only want to replace the library components in the highlighted Fluid Package, do not select the checkbox.
- 198. Hypotheticals 3-43 3-43 3.7.1 Converting a Library Component to a Hypo When converting a library component to a Hypo, follow the procedure outlined below. Figure 3.29 is used as a reference. 1. Select the Component List which contains the target library component. In this case, Component List - 1 is the selected component list. 2. From the Available Library Comps group, select the component to clone. In this case, 1-Propanol is selected. 3. Select the Target Hypo Group, where the new Hypo is to be placed. HypoAlcohol is selected. 4. Decide if you want to replace all instances of the source component (1-Propanol) with the new Hypo. Select the Replace All Instances checkbox to do this. In Figure 3.29 the checkbox is selected. 5. To complete the conversion, click the Convert to Hypo(s) button. 6. The new Hypo appears in the Hypo Components group, and has an asterisk (1-Propanol*) after its name, signifying that it is a hypothetical. 7. Close the property view to return to the Hypo Group property view. Hypo Group Selects the Hypothetical Group in which you want the converted library component placed. Hypo Components Displays all the hypothetical components present in the selected hypothetical group. When a library component is converted into a hypothetical, it is listed here. Object Description
- 199. 3-44 Hypo Controls 3-44 3.8 Hypo Controls The manipulation commands for hypotheticals are contained on the Hypotheticals tab of the Simulation Basis Manager. The Hypo Controls are the buttons contained within the Hypothetical Quick Reference group as shown below: 3.8.1 Viewing Groups Notice that the Hypothetical Quick Reference group displays the names of hypothetical groups and components. The components are listed in the Hypo Name column and the group to which each component belongs is listed in the Group Name column. From the Group Name column, select the Group that you want to view, and click the View Group button. HYSYS displays the Hypo Group property view for that Hypo Group. All the Hypo components that are part of the group appear on this property view. Figure 3.30
- 200. Hypotheticals 3-45 3-45 3.8.2 Moving Hypos When hypothetical components are created in HYSYS, they are created within a Hypo Group, and become part of the group. After adding a hypothetical component to a certain group, you may want to move it to another existing group. You can accomplish this through the Hypo Controls. From the Hypothetical Quick Reference group, click the Move Hypo button. This produces the following property view: Follow this procedure to move a Hypo to a different Hypo Group: 1. From the Hypo Components group, select the Hypo that you want to move. 2. Select the Target Hypo Group to which the Hypo is being moved. 3. Click the Switch to Group button, which becomes available when a selection is made in both the Hypo Components group and Target Hypo Group. 4. When you are finished moving groups, close the property view and return to the Hypotheticals tab of the Simulation Basis Manager. 3.9 References 1 Reid, R.C., Prausnitz, J.M., Poling, B.E., The Properties of Gases & Liquids, 4th edition, McGraw-Hill, 1987. Figure 3.31 By clicking the Add New Hypo Group button, HYSYS allows you to add a new Hypo Group while this property view has focus.
- 201. 3-46 References 3-46
- 202. HYSYS Oil Manager 4-1 4-1 4 HYSYS Oil Manager 4.1 Introduction................................................................................... 3 4.2 Oil Characterization ....................................................................... 4 4.2.1 Laboratory Data....................................................................... 4 4.2.2 Conventional Distillation Data .................................................... 5 4.2.3 Data Reporting Basis ................................................................ 7 4.2.4 Physical Property Assay Data ..................................................... 7 4.2.5 Property Curve Basis ................................................................ 8 4.2.6 Common Laboratory Data Corrections......................................... 8 4.2.7 Default Correlations.................................................................. 9 4.3 Petroleum Fluids Characterization Procedure ................................ 9 4.3.1 Initialization ............................................................................ 9 4.3.2 Step One - Characterize Assay ................................................. 12 4.3.3 Step Two - Generate Hypocomponents...................................... 12 4.3.4 Step Three - Install Oil............................................................ 13 4.3.5 User Property ........................................................................ 13 4.3.6 Correlations........................................................................... 13 4.4 Oil Characterization Property View .............................................. 14 4.5 Characterizing Assays.................................................................. 17 4.5.1 Input Data Tab....................................................................... 20 4.5.2 Calculation Defaults Tab .......................................................... 50 4.5.3 Working Curves Tab................................................................ 53 4.5.4 Plots Tab............................................................................... 54 4.5.5 Correlations Tab..................................................................... 55 4.5.6 User Curves Tab..................................................................... 57 4.5.7 Notes Tab.............................................................................. 58
- 203. 4-2 HYSYS Oil Manager 4-2 4.6 Hypocomponent Generation .........................................................59 4.6.1 Data Tab................................................................................60 4.6.2 Correlations Tab......................................................................68 4.6.3 Tables Tab..............................................................................70 4.6.4 Property Plot Tab ....................................................................71 4.6.5 Distribution Plot Tab ................................................................73 4.6.6 Composite Plot Tab..................................................................74 4.6.7 Plot Summary Tab...................................................................75 4.6.8 Notes Tab ..............................................................................76 4.7 User Property ...............................................................................76 4.7.1 User Property Tab ...................................................................77 4.7.2 User Property Property View.....................................................78 4.8 Correlations & Installation............................................................81 4.8.1 Correlation Tab .......................................................................81 4.8.2 Correlation Set Property View ...................................................82 4.8.3 Install Oil Tab .........................................................................87 4.9 TBP Assay - Example ....................................................................88 4.9.1 Initialization ...........................................................................90 4.9.2 Step 1 - Input Assay Data........................................................92 4.9.3 Step 2 - Cut Assay into Hypocomponents .................................101 4.9.4 Step 3 - Transfer Information to Flowsheet...............................104 4.9.5 Fluid Package Association.......................................................106 4.10 Sulfur Curve - Example .............................................................107 4.10.1 Fluid Package .....................................................................107 4.10.2 Install a User Property .........................................................108 4.10.3 Install the Assay .................................................................109 4.10.4 Create the Blend .................................................................112 4.10.5 Results ..............................................................................113 4.11 References................................................................................115
- 204. HYSYS Oil Manager 4-3 4-3 4.1 Introduction The Oil Characterization environment can be accessed from the Oil Manager tab of the Simulation Basis manager or by clicking the Oil Environment icon on the toolbar. To enter the Oil Characterization environment, at least one fluid package must exist in the case. Hypothetical (pseudo) components must be compatible with the property method being used by the fluid package. Also on the Oil Manager tab, you can view all flowsheets that exist in the current case and the fluid package associated with each. All hypocomponents that are defined within the Oil Characterization environment are assigned to a Hypo group and installed in an associated fluid package. Since Light End calculations for an oil require information from the property method being used by the associated fluid package, the hypocomponent cannot be shared among different fluid packages as regular hypothetical components can. However, you can still use the same hypocomponent in the non-associated fluid packages by adding them as hypotheticals, via the Add Hypo or Add Group button on the Selected tab of the Component List property view. The Oil Characterization environment provides a location where the characteristics of a petroleum fluid can be represented by using discrete hypothetical components. Physical, critical, thermodynamic and transport properties are determined for each hypothetical component using correlations that you select. The fully defined hypocomponent can then be installed in a stream and used in any flowsheet. HYSYS defines the hypocomponent by using assay data which you provide. The features available for the input of assay data minimize the time required for data entry. For instance, defined assays can be cloned, imported and exported. Exported assays can be used in other fluid packages or in other cases altogether. Oil Environment icon Refer to Chapter 3 - Hypotheticals for more information on hypo controls.
- 205. 4-4 Oil Characterization 4-4 Some of the features exclusive to the oil environment include: • Providing laboratory assay data • Cutting a single assay • Blending multiple assays • Assigning a user property to hypocomponents • Selecting correlation sets to determine properties • Installing hypocomponent into a stream • Viewing tables and plots for your input and for the characterized fluid 4.2 Oil Characterization The petroleum characterization method in HYSYS converts your laboratory assay analyses of condensates, crude oils, petroleum cuts, and coal-tar liquids into a series of discrete hypothetical components. These petroleum hypocomponents provide the basis for the property package to predict the remaining thermodynamic and transport properties necessary for fluid modeling. HYSYS produces a complete set of physical and critical properties for the petroleum hypocomponent with a minimal amount of information. However, the more information you can supply about the fluid, the more accurate these properties are, and the better HYSYS predicts the fluid's actual behaviour. 4.2.1 Laboratory Data Accurate volatility characteristics are vital when representing a petroleum fluid in your process simulation. HYSYS accepts five standard laboratory analytical assay procedures: • True boiling point distillation (TBP) • ASTM D86 and ASTM D1160 distillations (Separately or Combined) • ASTM D2887 simulated distillation • Equilibrium flash vapourization (EFV) • Chromatographic analysis
- 206. HYSYS Oil Manager 4-5 4-5 The characterization procedure performs its calculations based on an internally calculated TBP curve. If you supply an ASTM or EFV distillation curve, it is converted to a TBP curve using standard methods described in the API Data Book. If you do not supply any distillation data, then an average TBP distillation curve is generated for you based on the overall molecular weight, density, and Watson (UOP) K factor of your fluid. 4.2.2 Conventional Distillation Data The five primary types of assay data accepted by the Petroleum Characterization Procedure in HYSYS are listed here and explained in the following sections. • True Boiling Point analysis • ASTM D86 and 1186 Distillations • ASTM D2887 • Equilibrium Flash Vaporization • Chromatrographic analysis True Boiling Point (TBP) Analysis A TBP analysis is performed using a multi-stage batch fractionation apparatus operated at relatively high reflux ratios (15 - 100 theoretical stages with reflux ratios of 5 to 1 or greater). TBP distillations conducted at either atmospheric or vacuum conditions are accepted by the characterization procedure. The Watson (UOP) K factor is an approximate index of paraffinicity, with high values corresponding to high degrees of saturation: where the mean average boiling point is in degrees Rankine. K Mean Avg. BP ( ) 1 3 -- - sp gr 60F / 60F ----------------------------------------- - =
- 207. 4-6 Oil Characterization 4-6 The petroleum fluid's bubble point is a multi-component equilibrium condition such that there is an incipient vapour phase forming. This would, in effect, be a single-stage of fractionation as opposed to the highly refluxed operation of a TBP analysis. ASTM D86 and D1160 Distillations ASTM D86 and ASTM D1160 distillations also employ batch fractionation apparatus, but they are conducted using non- refluxed Engler flasks. Two standard ASTM distillations are supported: ASTM D86, used for light to medium petroleum fluids, and ASTM D1160, carried out at varying vacuum conditions and used for heavier petroleum fluids. For ASTM D86 distillation, HYSYS can correct for barometric pressure or cracking effects. ASTM D2887 ASTM D2887 is a simulated distillation curve generated from chromatographic data. The resulting boiling point curve is reported on a weight percent basis. Equilibrium Flash Vaporization An EFV curve is generated by a series of experiments conducted at constant pressure (1 atm). The results relate the temperature versus volume percent of liquid distilled, where the total vapour is in equilibrium with the unvaporized liquid. Chromatographic Analysis A Chromatographic analysis is a simulated distillation performed by passing a small amount of totally vaporized sample through a The initial boiling point (IBP) of a TBP curve does not correspond to the bubble point temperature of the petroleum fluid at atmospheric pressure.
- 208. HYSYS Oil Manager 4-7 4-7 packed gas chromatograph column. The relative amounts of the sample that appear in each standard "chromatographic" hydrocarbon group (paraffinic, aromatic and naphthaline groups, ranging from C6 to C30) are then detected and reported. 4.2.3 Data Reporting Basis All of the distillation analyzes described above are reported using one of the following fractional bases (assay basis): • Liquid volume percent or liquid volume fractions • Mole percent or mole fractions • Mass percent or mass fractions HYSYS accepts TBP and Chromatographic analyzes in any one of the three standard bases. However, due to the form of the API Data Book conversion curves, EFV, ASTM D86 and ASTM D1160 distillations must be supplied on a liquid volume basis, and ASTM D2887 are only reported on a weight basis. 4.2.4 Physical Property Assay Data As you supply more information to HYSYS, the accuracy of the Petroleum Characterization increases. Supplying any or all of bulk molecular weight, bulk density or bulk Watson (UOP) K factor increases the accuracy of your hypocomponent properties. Appropriately, if you supply laboratory curves for molecular weight, density and/or viscosity, the accuracy increases further. If you cannot supply property curve data, HYSYS generates internal curves using the available information. This information is applied using correlations. You can change the default set of property correlations as required. Refer to Appendix B - Oil Methods & Correlations for information on the correlations used in the Oil Environment.
- 209. 4-8 Oil Characterization 4-8 4.2.5 Property Curve Basis Physical property analyzes are normally reported by a laboratory using one of the following two conventions: • An Independent assay basis where the property assay volume fractions do not correspond on a one-to-one basis with the distillation assay fractions. • A Dependent assay basis, where a common set of assay fractions are utilized for both the distillation curve and the physical property curves. Physical properties are average values for the given range, and hence are midpoint values. Distillation data reports the temperature when the last drop of liquid boils off for a given assay range; therefore distillation is an endpoint property. Since all dependent input property curves are reported on the same endpoint basis as the distillation curve, they are converted by HYSYS to a midpoint basis. Independent property curves are not altered in any manner before being used in the characterization, since they are already defined on a midpoint basis. 4.2.6 Common Laboratory Data Corrections With ASTM D86 data, correction procedures are available to modify the laboratory results for both barometric pressure and thermal cracking effects, which result in the degradation of the sample at high distillation temperatures. These corrections are sometimes performed by the laboratory. If the corrections have not already been applied, the Characterization procedure has options available to apply the necessary corrections before commencing calculations.
- 210. HYSYS Oil Manager 4-9 4-9 4.2.7 Default Correlations When you begin a petroleum characterization session, HYSYS already has a set of default correlations for generating physical and critical properties of the hypocomponent. You may change any of the correlations at any time. 4.3 Petroleum Fluids Characterization Procedure 4.3.1 Initialization Before entering the Oil Characterization environment, you are required to create a fluid package with a specified Property Package at the very minimum. The Associated Property Package must be able to handle hypothetical components (i.e., a Steam Package is not allowed). If you want to use library components to represent the Light Ends portion of your assay, it is best to select the components prior to entering the Oil Characterization environment (if you forget to do this, you can return later to the Components tab and select the components). Refer to Section 4.8.2 - Correlation Set Property View for a listing of available correlations or Appendix B - Oil Methods & Correlations for a description of each correlation.
- 211. 4-10 Petroleum Fluids Characterization 4-10 The Oil Manager tab of the Basis Manager property view is shown below: The Associated Fluid Package for the Oil serves two primary functions: • Provides the light end components. • Identifies to which Fluid Package the Hypo group (oil) is being installed. When you install the oil into a stream, HYSYS always places this stream in the main flowsheet. For this reason, the associated Fluid Package must be the fluid package used by the main flowsheet. If you want to install the hypocomponent into a subflowsheet, this must be done on the Components tab of the Sub-Flowsheet fluid package (Hypothetical page, Add Group or Add Hypo button). If the sub-flowsheet uses the same fluid package as the main flowsheet, then this action is not necessary, as the hypocomponent is added to the fluid package once an oil stream is installed. Figure 4.1 The fluid package that is used in the Oil Characterization environment is displayed in the Associated Fluid Package drop-down list on the Oil Manager tab of the Simulation Basis Manager property view.
- 212. HYSYS Oil Manager 4-11 4-11 If you are going to transfer an oil stream between flowsheets with different fluid packages, ensure that the hypocomponent is installed in each flowsheet fluid package. If you have not defined the same components in each fluid package, HYSYS will transfer only the compositions for those components that are available, and will normalizes the remaining compositions. The fluid package that is used in the Oil Characterization environment can be selected from the Associated Fluid Package drop-down list. To enter the Oil environment, select the Enter Oil Environment button as shown in Figure 4.1, or select the Oil Environment button from the toolbar. The following figure illustrates the make-up of a typical oil: An Oil or Blend is comprised of any number of Assays. Each individual Assay contains specific information with respect to the Bulk Properties, Boiling Point Curve and Property Curves. For the Bulk Properties, you may supply Molecular Weight, Mass Density, Watson (UOP) K factor, and/or Viscosity. You can provide the Boiling Point curve in any one of the formats displayed in the Figure 4.2. During calculations, HYSYS Figure 4.2 OIL (blend) Assay 1 Assay 3 Bulk Properties Boiling Point Curve Property Curves Dependent/ Independent • Molecular Weight • Mass Density • Watson (UOP) K • Viscosity • TBP • ASTM D86 • ASTM D1160 • ASTM D86-D1160 • ASTM D2887 • EFV • Chromatograph • Molecular Weight • Mass Density • Viscosity Assay 2
- 213. 4-12 Petroleum Fluids Characterization 4-12 automatically converts all curves to a TBP basis. You also have the option of supplying Molecular Weight, Mass Density, and/or Viscosity curves. There are three general steps you must follow when creating an oil: 1. characterize assay 2. generate hypocomponent 3. install oil in flowsheet 4.3.2 Step One - Characterize Assay Enter the petroleum assay data into HYSYS via the Assay tab of the Oil Characterization property view. HYSYS uses the supplied Assay data to generate internal TBP, molecular weight, density and viscosity curves, referred to as Working Curves. 4.3.3 Step Two - Generate Hypocomponents Hypocomponents are generated from the Working Curves via the Cut/Blend tab of the Oil Characterization property view. This process is explained in Appendix B - Oil Methods & Correlations. See Section 4.6 - Hypocomponent Generation for the procedure. It is a good idea to open the Trace Window before you start the characterization, since it displays important information during Oil Characterization calculations. Refer to Section 4.5 - Characterizing Assays for more details.
- 214. HYSYS Oil Manager 4-13 4-13 4.3.4 Step Three - Install Oil Once the Blend is characterized satisfactorily, install hypocomponent into your HYSYS case via the Install Oil tab of the Oil Characterization property view. You can install the oil as a defined stream by providing a Stream name. The hypocomponent is also added to a distinct Hypo group and to the associated fluid package. 4.3.5 User Property In addition to the three basic steps required to characterize an oil in HYSYS, user properties can be added, modified, deleted, or cloned. User Properties can be created from the Oil Manger or in the Basis Environment. A user property is any property that can be calculated on the basis of composition. 4.3.6 Correlations Correlations can be selected via the Correlation tab of the Oil Characterization property view. HYSYS allows you to select from a wide variety of correlations used in both the determination of working curves and in the generation of hypocomponent. All of the information used in generating your hypocomponent is stored with the case. This includes: Assays and their associated Options, Property Curves and Bulk Properties, User Properties, the Correlations used for generating the pseudo-components, the Constituent oils (with flow rates) for blends, and the flowsheet stream in which each oil was installed. This information is available the next time you open the case. Refer to Section 4.8.3 - Install Oil Tab for more details. Refer to Section 4.7 - User Property for more information. Refer to Section 4.8.1 - Correlation Tab for more information.
- 215. 4-14 Oil Characterization Property View 4-14 4.4 Oil Characterization Property View When you enter the Oil Characterization environment, the following property view appears: This property view is the Oil Characterization environment. There are five tabs which represent the main areas of the environment and are described below: Figure 4.3 Tab Description Assay Add, edit, delete, clone, import or export Assays (see Section 4.5 - Characterizing Assays). Cut/Blend Add, edit, delete or clone Blends (see Section 4.6 - Hypocomponent Generation). User Property Add, edit, delete or clone User Properties (see Section 4.7 - User Property). Correlation Add, edit, delete or clone Correlation Sets (see Section Section 4.8.1 - Correlation Tab). Install Oil Install hypocomponent into a stream in a HYSYS case (see Section 4.8.3 - Install Oil Tab).
- 216. HYSYS Oil Manager 4-15 4-15 The Clear All, Calculate All, and Oil Output Settings... buttons are available on any tab of the Oil Characterization property view. • If you select the Calculate All button, HYSYS calculates all Assays and Blends. This option is useful if you have several Assays and/or Blends and you want to see the global effect of a change in the correlation. • If you select the Clear All button, HYSYS displays the following warning: If you want to delete all Oil Characterization information select Yes. • Selecting the Oil Output Settings... button results in the Oil Output Settings property view. Oil Output Settings Property View On this property view, you can set the initial boiling point (IBP) and final boiling point (FBP) cut points on a liquid volume, mole or mass percentage basis. These values are used to determine the initial and final boiling temperatures of the TBP working curve. The default values are 1% for the IBP and 98% for the FBP. Figure 4.4 Figure 4.5
- 217. 4-16 Oil Characterization Property View 4-16 If for example, an IBP value of 1% is specified, the initial boiling point becomes the weighted average boiling temperature of all components that boil off in the first volume percent. The final boiling point is determined in a similar manner. If 98% is used for the FBP, the final boiling temperature becomes the weighted average boiling temperature of all the components that boil off in the last 2 volume percent. The ends of the curve are 'stretched' to fill the assay range of 0 to 100%. On the Oil Output Settings property view, you can select the default ASTM D86 Interconversion Method TBP conversion type from the Default D86 Curve Type drop-down list: • API 19741 • API 19872 • API 19943 • Edmister-Okamoto 19594 You can also select the ASTM D2887 Interconversion method from the following: • API 19875 • API 1994 Indirect6 • API 1994 Direct7 The Oil Output Settings are saved along with your simulation case. They can be accessed either within the Oil manager or through the Simulation menu bar option in the Main Simulation environment. Changing the IBP and FBP in the Oil Output Settings will affect the following calculations: • Blend Properties Table and Plots • Boiling Point Utility • Cold Properties Utility • Column specs (Cut Point, Gap Cut Point, Flash Point, RON Point) • Column Profiles When IBP and FBP changes are made, all necessary calculations are automatically performed. Oil Input settings are accessed through the Session Preferences property view.
- 218. HYSYS Oil Manager 4-17 4-17 4.5 Characterizing Assays The Assay tab of the Oil Characterization property view is shown below: The Available Assays are listed in the left portion of the property view. The following Assay manipulation buttons are available: The ASTM D86 and ASTM D2887 interconversion methods do not affect column specifications, since each related columnspec has its own independent setting. If you want to change the column specifications, click the Change Interconversion Methods for Existing Column Specs button. HYSYS asks you to confirm that you want to globally impose these changes. Figure 4.6 C Button Description View Edit the currently highlighted Assay. Add Create a new Assay. Delete Erase the currently highlighted Assay. HYSYS does not prompt for confirmation when deleting an assay, so be careful when you are using this command. However, HYSYS does not delete an assay that is being used by a blend. Refer to Section 4.9 - TBP Assay - Example for characterizing assays.
- 219. 4-18 Characterizing Assays 4-18 For a highlighted Assay, you can edit the name in the Name field and provide a description in the Description textbox found in Assay Information group. To create a new assay or edit an existing assay you can click the Add or View button, respectively. This opens the Assay property view for the new or existing assay. When the Oil Input Preferences button under the Assay Information group is selected, the Session Preferences property view opens to the Oil Input tab. From here you can set the input defaults for your case. When a new case is created, the methods specified in the Oil Input settings initialize the Oil Output settings. However, any changes made afterwards to either settings group are independent. Clone Create a new Assay with the same properties as the currently highlighted Assay. HYSYS immediately opens a new Assay view. Import Bring a saved assay into the current case. Export Save an assay to disk so that it can be used in other cases. Imported and Exported assays have a filename form *.oil. Figure 4.7 Button Description
- 220. HYSYS Oil Manager 4-19 4-19 Assay Property View The Assay property view is shown below: The Assay property view consists of seven tabs, which are described below: Figure 4.8 The appearance of the Assay property view depends on how you define the assay in the Assay Definition group and which radio button is selected in the Input Data group. Tab Description Input Data Allows you to define and specify the Assay. Calculation Defaults Allows you to set the calculation methods and extrapolation methods for the assay and assay property curves. Working Curves Displays a table of Assay Working curves. Plots Allows you to view any of the input assay curves in graphical form. Correlations Allows you to edit the individual property conversion methods used. User Curves Allows you to attach available user properties to the assay. Notes Allows you to attach relevant comments to the assay.
- 221. 4-20 Characterizing Assays 4-20 There are four objects found at the bottom of the property view and are described below: The following sections outline each of the tabs contained within the Assay view (accessed via the View or Add button). 4.5.1 Input Data Tab The minimum amount of information that HYSYS requires to characterize a petroleum fluid is either: • a laboratory distillation curve • two of the following three bulk properties: Molecular Weight, Density, or Watson (UOP) K factor. However, any additional information such as distillation curves, bulk properties and/or property curves, should be entered if Object Description Name You can provide the name of the Assay in the Name cell (maximum 12 characters). Assay Status The status bar is displayed at the bottom of the screen: • Assay Was Not Calculated. You have not provided enough Assay information to determine a solution (or you have enough information and have not clicked the Calculate button). • Assay Was Calculated. You have provided Assay information, clicked the Calculate button, and obtained a solution. • An Error Was Found During Calculation. The Trace Window usually shows a description of the type of Error. Calculate Select this button to calculate the Assay. Delete Select this buttons to delete the current Assay. There is no confirmation when you delete an assay, unless it is being used by a blend, in which case you cannot delete it. The Watson (UOP) K factor is an approximate index of paraffinicity, with high values corresponding to high degrees of saturation: where the mean average boiling point is in degrees Rankine. K Mean Avg. BP 3 sp gr 60F / 60F -------------------------------------- - =
- 222. HYSYS Oil Manager 4-21 4-21 possible. With more supplied information, HYSYS produces a more accurate final characterization of your oil. The Input Data tab is shown below: The Input Data tab is split into two groups: the Assay Definition and Input Data groups. The Assay Definition group is where the When you open the Assay view to the Input Data tab, all that is displayed is the Assay Data Type and Bulk Properties drop- downs. New input fields are added as you specify the information for your oil. Figure 4.9 Specify which individual Input Data curves are to be included. Depending on the specifications made in the Assay Definition group. These radio buttons become visible. Each radio button makes a different entry field visible. The layout of Input Data group depends largely on the settings you choose in this group. Options related to the Assay Data Type are displayed in this area. The entry fields displayed in this table depend on which radio button is selected. For each of the three property curves, Molecular Weight, Density and Viscosity, you have the following options: Not Used, Dependent, or Independent. If you switch the status to Not Used after you have entered assay data, all your data for that property curve is lost when you return your selection to Dependent or Independent.
- 223. 4-22 Characterizing Assays 4-22 assay type and use of property curve, light ends data and bulk properties are defined. The Input Data group is where the distillation, property curve, light ends and property data is actually inputted. Light Ends Handling & Bulk Fitting If you have a light-ends analysis along with light-ends free input curves and total bulk properties or light-ends free bulk properties you can use the HYSYS oil manager to combine the light-ends analysis with the light-ends free input curves to match the specified bulk properties. This functionality is clearly seen in the case of chromatographic input, where you may want to input the light-ends along with the C6+ as the chromatographic data groups. Because of the nature of the analysis, the chromatographic data is light-ends free. Light Ends Analysis Versus Calculated TBP Curve Ideally, for the light-ends free distillation input curve, the TBP at 0% should coincide with the highest NBP in the light-ends components with non-zero compositions, see Case B in Figure 4.10. However, due to imperfect input data or extrapolation, the calculated TBP at 0% may be lower than the top NBP for light ends (Case A in Figure 4.10) or higher than the top NBP for light ends (Case C in Figure 4.10). To avoid overlapping or discontinuity, these two cases must be properly handled.
- 224. HYSYS Oil Manager 4-23 4-23 In Case A, the highest temperature of the non-zero component in light ends is above the TBP at 0%. In this case, we need to eliminate the points having TBP lower than the top light-ends temperature. After the elimination, the remaining portion of the light-ends free TBP curve are re-scaled to 100%, and then a new set of standard 51 points calculation tables are regenerated from the remaining portion of the corresponding curves. In Case C, the top light-ends temperature is below the TBP at 0%. Since the extrapolation may not be accurate, more trust is put on the light-ends analysis and hence assign the top light- ends temperature as the TBP at 0%. To avoid a sudden jump in the distillation curve, the first 20% of the distillation curve is also smoothed. Figure 4.10
- 225. 4-24 Characterizing Assays 4-24 Curve Partition for Bulk Property Fitting To allow piece-wise fitting for a bulk property, a property curve is divided into three sections: head, main, and tail. The ending % of the head section and beginning % of the tail section can be specified. Each section can have an independent adjusting weight factor as shown in the figure below. For piecewise bulk property fitting there are two concerns to be addressed. First, since each section can have an independent adjusting weight factor, there may be a discontinuity at the boundary of the two sections. Second, how to ensure relatively fast convergence with uneven adjustment of the property concerned. For the first concern, discontinuity is avoided by using linear interpolation between two sections. For the second concern, the weight factor is normalized first and then the following equation is used to calculate the new point property value from the old point property value: where: New[i] = the new property value at point i Wt[i] = the normalized weight factor at point i Ratio = the calculated uniform adjusting ratio Old[i] = the old property value at point i Figure 4.11 (4.1) New i [ ] 1 Wt i [ ] Ratio 1 – ( ) × + [ ] Old i [ ] × =
- 226. HYSYS Oil Manager 4-25 4-25 HYSYS allows you to specify if a given curve contains light-ends contributions, set if a specified bulk property contains light-ends and partition a property curve so that some sections can be adjusted more than others. The Light Ends Handling & Bulk Fitting Options property view is accessed by clicking the Light Ends Handling & Bulk Fitting Options button. The light ends handling and bulk fitting options are described below: The last five columns are used for piece-wise bulk property fitting. When fitting a given bulk property value the internal calculation curve, either based on the input curve or calculated from a correlation, is divided into three sections. Each of the three sections can be independently adjusted. Figure 4.12 Column Description Input Curve Displays all the possible input curves, including user property curves. Curve Incl L.E. Specifies if the corresponding input curve includes light ends. If an input curve is not used, the corresponding checkboxes are grayed out. Bulk Value Specifies the bulk value for the corresponding input curve. Bulk Value Incl L.E. Specifies if a given bulk value contains the contributions of light ends. If no light end compositions are given these checkboxes are grayed out.
- 227. 4-26 Characterizing Assays 4-26 When fitting a given bulk value, at least one section must be adjustable. Therefore, at least one section must have a non-zero percentage range and a non-zero adjusting weight factor. Since the adjusting weight factors are relative, it is the weight factor ratios among the three sections that matter. The Apply smart bulk fitting on molecular weight and mass density checkbox allows you to achieve the best bulk fitting on mass density and molecular weight input curves. If the checkbox is selected, the mass density and molecular weight rows are disabled and the values appear in black. In situations when either a full light ends analysis is not available or you do not want to identify part of the analyzed light ends components (in other words, only partial light ends analysis data is available), HYSYS can generate overlapping hypothetical components to compensate the missing portion of the light ends, making the output stream matching both the partial light ends input and the other input curves. To activate this option, select the Allow Partial Light Ends Input checkbox. Once selected, HYSYS identifies the need and generate the needed hypothetical components to compensate the missing portions of the light ends, leading to a much better fit between the generated curves and the input curves. If the input for either molecular weight or mass density curves is less than 95% on a user defined basis, only the extrapolated tail is adjusted to match the user specified bulk value. If the input is Column Description Head% Specifies the ending percent for the head section on the input basis. Head Adj Wt Specifies the corresponding relative bulk fit adjusting weight factor from 0 to 10, where 0 means no adjusting at all. Main% Specifies the ending percent for the main section of the input basis. Main Adj Wt Specifies the corresponding relative bulk fit adjusting weight factor from 0 to 10, where 0 means no adjusting at all. Tail Adj Wt Specifies the corresponding relative bulk fit adjusting weight factor from 0 to 10, where 0 means no adjusting at all.
- 228. HYSYS Oil Manager 4-27 4-27 more than or equal to 95% on the user defined basis, the entire curve will be adjusted to match the bulk value specified. The user input data is the most reliable data available, and hence should not be adjusted to match the bulk value as long as there is enough extrapolated data to adjust. When only the tail is adjusted, it is ensured that the upper end point is no lower than the linear extrapolation of the last two points. This means that in most cases, the extrapolated portion of the curve is concave, i.e., the curvature is positive. If the bulk value is given such that the extrapolated values are below the linear extrapolation values, the whole curve is adjusted and the following warning message is displayed: “Curve is normalized due to the inconsistency between the supplied curve and bulk data.” If the upper limit value is reached when adjusting the molecular weight or density curve and the specified bulk value is still not matched, no adjustment is made and the following message appears: “No exact match, upper limit reached”. For molecular weight, the upper limit value is ten times that of the bulk value. For mass density, the upper limit is three times that of the bulk value. If a bulk molecular weight or mass density is given without a corresponding input curve, the whole calculated curve will be adjusted. The 95% input is an artificial dividing line to decide if only the tail is adjusted or the whole curve is adjusted. If the user input curve crosses the dividing line, there is a chance to have a sudden change in the behaviour. If this occurs, you can overcome the problem by manually setting the bulking fitting options without using the smart option. To achieve similar results manually, you can set the Head Adj Wt and Main Adj Wt to zero, set the Main % to the desired tail starting percent, and leave the Tail Adj Wt to its default value of 1.0.
- 229. 4-28 Characterizing Assays 4-28 Bulk Properties Definition These bulk properties are optional except when distillation data is not available (you have selected None as the Data Type). If you do not supply any distillation data, you must supply two of the three initial bulk properties (Molecular Weight, Mass Density or Watson (UOP) K factor) for HYSYS to create a "typical" TBP curve. This TBP curve is generated based on a Whitson molar distribution model. If you are supplying property curves and you supply a bulk molecular weight, density, or Watson K factor, HYSYS smoothes and adjusts the corresponding curves to match the supplied bulk properties. This procedure is performed whether you supply property curves or they were internally generated by HYSYS. Assay Definition Group The Assay Definition group contains only one object involved in the specification of Bulk Properties: the Bulk Properties drop- down. The Bulk Properties drop-down list has two options: Option Description Used If an Assay Data Type is not selected, the Input Data group displays the Bulk Prop table along with the Molecular Weight of lightest component field. However, if an Assay Data Type is selected, a Bulk Props radio button appears in the Input Data group. When this radio button is active the Bulk Prop table is displayed. Not Used No bulk properties are considered in the oil characterization calculations.
- 230. HYSYS Oil Manager 4-29 4-29 Input Data Group The Input Data group that appears when Used is selected for bulk properties is shown in the figure below: It consists of two objects: the Bulk Properties table and Molecular Weight of lightest component field. The Bulk Properties table has several fields: Figure 4.13 The Molecular Weight of lightest component field is only visible when the Assay Data Type selected is None. Bulk Properties Description Molecular Weight The Molecular Weight must be greater than 16. Standard Density The mass density must be between 250 and 2,000 kg/ m3 (units can be mass density, API, or specific gravity, chosen from the drop-down list).
- 231. 4-30 Characterizing Assays 4-30 Defining Assay Types Assay Definition Group To define Assay types, select a type in the Assay Definition group using the drop-down list. Watson (UOP) K factor This factor must be between 8 (highly aromatic or naphthenic) and 15 (highly paraffinic). Only field units are used here. The Watson (UOP) K factor is an approximate index of paraffinicity, with high values corresponding to high degrees of saturation: where: Mean Avg. BP = the mean average boiling point is in degrees Rankine. Bulk Viscosities The bulk viscosity type and the temperature at two reference points. Figure 4.14 Bulk Properties Description K Mean Avg. BP 3 sp gr 60F / 60F -------------------------------------- - =
- 232. HYSYS Oil Manager 4-31 4-31 Assay types that are available are described in the table below: Assay Type Description TBP True boiling point distillation data at atmospheric pressure. Once you have selected this option, the TBP Distillation Conditions group is displayed. The default distillation conditions are atmospheric, however, you can enable Vacuum Distillation for sub- atmospheric conditions by selecting the Vacuum radio button. The default pressure in this case is 10 mmHg (ASTM standard). When you supply sub-atmospheric data, it is automatically corrected from vacuum to atmospheric conditions using procedure 5A1.13 (without K-correction) from the API Data Book. ASTM D86 Standard ASTM D86 distillation data at atmospheric pressure. You must provide data on a liquid volume basis. You can specify the ASTM D86/TBP Interconversion Method (API 19741 , API 19872 , API 19943 or Edmister-Okamoto 19594 ) on the Calculation Defaults tab. With the ASTM D86 Assay type you can also correct for thermal cracking as well as for elevation. ASTM D1160 ASTM D1160 distillation data. After you have selected this option, the ASTM D1160 Distillation Conditions group is displayed. By default, the Vacuum radio button is selected and the Vacuum Distillation Pressure is set to 10 mmHg (ASTM standard). When ASTM D1160 Vacuum data is supplied, HYSYS will first convert it to TBP vacuum data, and then convert this to TBP data at 760 mmHg using procedure 5A1.13 of the API Data Book. You must provide data on a liquid volume basis. ASTM D86- D1160 This is the combination of the ASTM D86-D1160 data types. The options for ASTM D86 and ASTM D1160 are similar to the descriptions above. You must provide data on a liquid volume basis. ASTM D2887 Simulation distillation analysis from chromatographic data, reported only on a weight percent basis at atmospheric pressure. On the Calculation Defaults tab, you have the choice of conversion method (API 19875 , API 1994 Indirect6 , API 1994 Direct7 ). Chromatogra ph A gas chromatograph analysis of a small sample of completely vaporized oil, analyzed for paraffin, aromatic and naphthenic hydrocarbon groups from C6 to C30. Chromatographic analyses may be entered on a mole, mass, or liquid volume basis. With this option, you enter Light Ends, Bulk and Chromatographic analysis data. Refer to Chromatographic Assay Input for more information.
- 233. 4-32 Characterizing Assays 4-32 Input Data Group The Input Data group displayed when the Distillation radio button is selected depends on the Assay type you have selected in the Assay Definition group. Distillation Data For Assay Type options TBP, ASTM D86, ASTM D1160, ASTM D2887 and EFV, the procedure for entering boiling temperature information is essentially the same - you are required to enter at least five pairs of Assay Percents and boiling Temperatures. The Distillation input table is exactly the same for each of these options. EFV Equilibrium flash vaporization curve; this involves a series of experiments at constant atmospheric pressure, where the total vapour is in equilibrium with the unvaporized liquid. None No distillation data is available; HYSYS generates a TBP curve from bulk property data. With this option, you only enter bulk data. The conversion procedure from various assay types to a TBP curve is based on Figure 3-0.3 of the API Data Book. You can view and edit the assay boiling Temperature input table by selecting the Distillation radio button and clicking the Edit Assay button. Assay Type Description
- 234. HYSYS Oil Manager 4-33 4-33 For the ASTM D86-D1160 characterization procedure, you are required to enter boiling temperature information for both the ASTM D86 and ASTM D1160 data types. This procedure averages the ASTM D86 curve and ASTM D1160 curve in the area where they overlap. Figure 4.15
- 235. 4-34 Characterizing Assays 4-34 For example, in the combined ASTM D86-D1160 input form shown on the figure below, the last recorded ASTM D86 assay point is at 30 vol%, and the first reported ASTM D1160 data point is at 10 vol%. Therefore, the resulting TBP curve will represent the average of the two curves between 10 vol% and 30 vol%. Each curve must contain a minimum of 5 data points. Chromatographic Assay Input This distillation option allows you to enter a standard laboratory chromatographic analysis directly. The only required input is the assay fraction for each chromatographic hydrocarbon group in the paraffin, aromatic, and naphthenic families. The required minimum of five points can be any combination of points from the three PNA groups. The normal boiling point of each hydrocarbon group is displayed in the PNA tables. Chromatographic analyses may be entered on either a mole, mass, or liquid volume basis, with the best results obtained when the input fractions are on a mole fraction basis. Figure 4.16
- 236. HYSYS Oil Manager 4-35 4-35 A typical C6+ liquids chromatographic analysis is shown in the chromatographic input form below. Chromatographic analyses are typically performed after the light ends of the original sample are removed. If you have a Light Ends analysis in this case, refer to Light Ends Handling & Bulk Fitting for details. Assay Input - No Distillation Data Available When a distillation analysis is not available, HYSYS generates a typical TBP curve based on supplied bulk properties (molecular weight, mass density, and Watson (UOP) K factor). You have the option of specifying the molecular weight of the lightest component in the mixture, which may help in generating more accurate TBP curves for heavy petroleum fluids. Figure 4.17 You may also supply bulk property data (see Bulk Properties in Section 4.5.1 - Input Data Tab for details).
- 237. 4-36 Characterizing Assays 4-36 Although accurate enough for heat balance applications, caution should be exercised when the Whitson option is used to produce hypocomponent for fractionation calculations. This method realistically supplies accuracy sufficient only for preliminary sizing calculations. For condensate with only bulk data available for the C7+ fraction, experience has shown a considerable increase in accuracy by representing the fraction with several hypocomponent as opposed to a single hypothetical component with the bulk properties. Refer to Bulk Properties Definition (earlier in this Section) for details on entering bulk property data, particularly in regards to Bulk Viscosities. HYSYS uses the Whitson Molar Distribution model that requires at least two of the three bulk properties (not including bulk viscosities) to produce an average TBP distribution. Figure 4.18
- 238. HYSYS Oil Manager 4-37 4-37 General Guidelines Some general guidelines are provided below: • There is no limit to the number of assay data points that you may enter for TBP, ASTM D86, ASTM D1160, ASTM D86-D1160 ASTM D2887 or EFV analyses. Data points may be input in any order, as HYSYS automatically sorts your input data. • HYSYS requires a minimum of 5 data points for all assays. Depending on the shape of the input curve, intermediate values for HYSYS' internal TBP working curve are interpolated using either a third or fourth order LaGrange polynomial fit. The points outside your data are extrapolated using the extrapolation method which you select on Calculation Defaults tab: Least Squares, Lagrange or Probability. • Each time you change the Basis or Extrapolation method, the Assay needs to be recalculated. • TBP, EFV, and Chromatographic laboratory assay values may be entered on a liquid volume, mole or weight basis. Liquid volume is the default basis for TBP and EFV input, and mole is the default basis for Chromatographic input. Due to the form of the conversion curves in the API Data Book, you must supply your ASTM D86 and ASTM D1160 distillation data on a liquid volume basis. ASTM D2887 is only reported on a weight percent basis. • If you are editing an assay, redefining the Basis does not alter your supplied assay values. For example, consider an assay curve with 10, 30, 50, 70 and 90 liquid volume percent points. If you change the Basis to mass percent, the assay percents and temperature are not changed. The temperature you supplied for 10% liquid volume is retained for 10% mass. HYSYS generates all of its physical and critical properties from an internally generated TBP curve at atmospheric conditions. Regardless of what type of assay data you provide, HYSYS always converts it to an internal TBP curve for the characterization procedure. The internal TBP curve is not stored with the assay.
- 239. 4-38 Characterizing Assays 4-38 Light Ends Definition Light Ends are defined as pure components with low boiling points. Components in the boiling range of C2 to n-C5 are most commonly of interest. Generally, it is preferred that the portion of the oil's distillation assay below the boiling point of n-C5 be replaced with discrete pure components (library or hypothetical). This should always yield more accurate results than using hypocomponent to represent the Light Ends portion. Assay Definition Group HYSYS provides three options to account for Light Ends, which are as follows: Option Description Ignore HYSYS characterizes the Light Ends portion of your sample as hypocomponents. This is the least accurate method and as such, is not recommended. Auto Calculate Select this when you do not have a separate Light Ends analysis but you want the low boiling portion of your assay represented by pure components. HYSYS only uses the pure components you selected in the fluid package. Input Composition Select this when you have a separate Light Ends assay and your petroleum assay was prepared with the light ends in the sample. HYSYS provides a form listing the pure components you selected in the fluid package. Input your data on a non-cumulative basis. To correctly employ the Auto Calculate or Input Composition options, you should either pick library components, or define hypothetical components to represent the Light Ends before entering the Oil Characterization environment. If you have selected the Auto Calculate method without specifying light ends, HYSYS calculates the oil using only hypocomponent, just as if you had selected Ignore. If you selected Input Composition, there are no light end components for which you can supply compositions. You can go back to the Fluid Package property view at any time and define your light components.
- 240. HYSYS Oil Manager 4-39 4-39 The following sections provide a detailed explanation of Light Ends, how the laboratory may account for them, how they are reported and how HYSYS utilizes this information. It is recommended that you read this information to ensure that you are selecting the right options for your assay. Laboratory Assay Preparation During TBP and ASTM laboratory distillations, loss of some of the Light Ends components from the sample frequently occurs. To provide increased accuracy, a separate Light Ends assay analyzed using chromatographic techniques may be reported. Regardless of whether a separate light ends analysis was provided, your overall assay is either Light Ends Included or Light Ends Free. The way in which your sample was analyzed affects both the results and the method you should use to input the information for your characterization. Light Ends Portion Included in Assay In this case, your assay data was obtained with the light ends components in the sample; i.e., the assay is for the whole sample. The IBP temperature for your assay is lower than the boiling point of the heaviest pure light end component. This corresponds to an IBP approximately equal to the weighted average boiling point of the first 1% of the overall sample. For example, if the lightest component is propane and it makes up more than 1% of the total sample, the IBP of the assay is approximately -45°F (the normal boiling temperature of propane).
- 241. 4-40 Characterizing Assays 4-40 If the Light Ends were included in your overall assay, there are two possibilities: Assay is Light Ends Free Your assay data was analyzed with the Light Ends components removed from the sample, or the assay was already adjusted for the Light Ends components. The IBP temperature for your assay is higher than the boiling point of the heaviest pure light end component - typically your assay is for the C6+ fraction only and the IBP temperature is somewhat above 95°F (36°C). If your distillation data is light-ends free and you have separate light-ends analysis data, you can use HYSYS oil characterization to combine the two. The advantage of doing this is that the bulk properties, if available, will be fitted and matched accurately. To do the combining, you need to input the distillation data and light ends data as usual and then click the Light Ends Handling & Bulk Fitting Options button accessible from Input Data or User Curves tab. In the Light-Ends Handling & Bulk Fitting Options property view, clear the Curve Incl L.E. checkbox for distillation. If you have bulk properties to fit, you need to indicate if the bulk values include light ends by selecting or clearing the Bulk Value Incl L.E. checkboxes. Option Description Light Ends Analysis Supplied If you know that light ends are included in your assay, select the Input Composition option from the Light Ends group, and enter the composition data directly into the Light Ends composition property view. No Light Ends Analysis Available If you do not have a laboratory analysis for the light ends portion of your assay, then you should use the Auto Calculate option. HYSYS represents the light ends portion of your assay as discrete pure components, automatically assigning an appropriate assay percentage to each. If you do not do this (you select Ignore), HYSYS represents the Light Ends portion of the assay as petroleum hypocomponent.
- 242. HYSYS Oil Manager 4-41 4-41 Input Data Group When you have selected Input Composition as the Light Ends option and you select the Light Ends radio button in the Input Data group, the following property view appears. There are three objects associated with the Light Ends Input and are described below: Figure 4.19 Object Description Light Ends Basis Allows you to select the basis for the Light Ends analysis on a mole, mass, or liquid volume basis. The way in which you enter the rest of the light ends data depends on whether you select a percent or flow basis: • Percent. Enter the percent compositions for the Light Ends on a non-cumulative basis. HYSYS calculates the total Light Ends percentage by summing all of the Light Ends assay data. If the sum of the light ends assay values is equal to 100 (you have submitted normalized data), you must enter the Percent of light ends in the Assay. This value must be on the same basis as the distillation data. If the sum of the light ends is equal to 1.0000, HYSYS assumes that you have entered fractional data (rather than percent), and you are required to enter the Percent of light ends in the Assay. • Flow. Enter the flows for each component, as well as the percent of light ends in the assay.
- 243. 4-42 Characterizing Assays 4-42 Auto Calculate Light Ends The Auto Calculate extraction procedure internally plots the boiling points of the defined Light Ends components on the TBP working curve and determine their compositions by interpolation. HYSYS adjusts the total Light Ends fraction such that the boiling point of the heaviest Light End is at the centroid volume of the last Light Ends component. The results of this calculation are displayed in Light Ends Composition matrix. If a fluid package contains a large number of hydrocarbons, especially heavy ones, HYSYS may allocate a very large portion of the assay input to light ends, leading to undesired results. The checkboxes under the Use column allows you to decide which components are used in the light ends auto allocation. This option gives you more control on the light ends to be used, and allows the use of any fluid package to be associated with the oil manager, even with very heavy hydrocarbons. Light Ends Composition matrix The matrix consists of the three fields: • Light Ends. Displays all pure components or hypotheticals you selected in the associated fluid package. • Composition. The composition value of the associated component is either entered (when Light Ends drop-down is set to Input Composition) or automatically calculated (when the Light Ends drop-down is set to Automatically Calculated) • NBP. The Normal Boiling Point of the associated component or hypothetical. Percent of lights ends in Assay The total percentage of light ends in the Assay. If the Light Ends Basis selected is percentage (i.e., LiquidVolume%, Mole% or Mass%), then this is automatically calculated. If the Basis selected is flow based (i.e., Liquid Flow, Mole Flow or Mass Flow), you are required to provide this value. Object Description Refer to Appendix B - Oil Methods & Correlations for a graphical representation of the Auto Calculate Light Ends removal procedure.
- 244. HYSYS Oil Manager 4-43 4-43 Unlike when setting the Input Composition, the matrix is not editable. Physical Property Curves Specification Physical property analyzes are normally reported from the laboratory using one of the following two conventions: • An Independent assay basis, where a common set of assay fractions is not used for both the distillation curve and physical property curve. • A Dependent assay basis, where a common set of assay fractions is used for both the distillation curve and the physical property curves. Physical properties are average values for the given range, and hence are midpoint values. Distillation data reports the temperature when the last drop of liquid boils off for a given assay range, and therefore distillation is an endpoint property. Since all dependent input property curves are reported on the same endpoint basis as the distillation curve, they are converted by HYSYS to a midpoint basis. Independent property curves are not altered in any manner as they are already defined on a midpoint basis. Figure 4.20
- 245. 4-44 Characterizing Assays 4-44 As with distillation curves, there is no limit to the number of data points you provide. The order in which you input the points is not important, as HYSYS sorts the input data. A minimum of five data points is required to define a property curve in HYSYS. It is not necessary that each property curve point have a corresponding distillation value. If a bulk molecular weight or mass density is going to be supplied, then the corresponding Molecular Weight or Density working curve generated from your input is smoothed to ensure a match. If you do not enter bulk properties, then they are calculated from the unsmoothed working curves. Assay Definition Group Each property curve type (i.e., Molecular Wt., Density and Viscosity) has its own drop-down list in the Assay Definition group. Entering the 0 vol% point of a dependent curve contributes to defining the shape of the initial portion of the curve, but has no physical meaning since it is a midpoint property curve. Figure 4.21
- 246. HYSYS Oil Manager 4-45 4-45 Each drop-down list contains the same three options and are described below: Input Data Group Defining Molecular Weight and Density property curves as either Independent or Dependent adds the corresponding radio button to the Input Data group. However, defining a Viscosity property curve as Independent or Dependent, HYSYS accepts viscosities for assay values at two specified temperatures, with the default temperatures being 100 and 210°F. Selecting the Molecular Wt., Density, Viscosity1, or Viscosity2 radio buttons brings up the objects associated with the specification of the respective property curve. To enter the property curve data, simply select the radio button for the property curve you want to input and click the Edit Assay button. Option Description Not Used No property data is considered in the assay calculation. Dependent A common set of assay fractions is used for both the distillation curve and the physical property curves. Independent A common set of assay fractions is not used for both the distillation curve and physical property curve.
- 247. 4-46 Characterizing Assays 4-46 Molecular Wt. Curve An example of a Molecular Weight assay is shown below: The assay data is entered into the Assay Input Table property view which is opened when the Edit Assay button is selected. The form of this property view is the same regardless of whether you have specified Independent or Dependent data. However, if you specified Dependent data, the Assay Percents that you defined for the distillation data are automatically entered in the table. Depending on the shape of the curve, intermediate values for HYSYS' internal working curve are interpolated using either a third or fourth order Lagrange polynomial fit of your input curve, while points outside your data are extrapolated. You can select the extrapolation method for the fit of your input curve on the Calculation Defaults tab: Least Squares, Lagrange or Probability. Figure 4.22 In Dependent Curves, making a change to an Assay Percent value automatically changes this value in all other Dependent curves (including the Boiling Point curve).
- 248. HYSYS Oil Manager 4-47 4-47 Density Curve An example of a Density assay is shown below: The assay data is entered into the Assay Input Table property view which is opened when the Edit Assay button is selected. The form of this property view is the same regardless of whether you have specified Independent or Dependent data. However, if you specified Dependent data, the Assay Percents that you defined for the distillation data are automatically entered in the table. Depending on the shape of the curve, intermediate values for HYSYS' internal working curve are interpolated using either a third or fourth order Lagrange polynomial fit of your input curve, while points outside your data are extrapolated. You may select the extrapolation method for the fit of your input curve on the Calculation Defaults tab: Least Squares, Lagrange (default) or Probability. Figure 4.23
- 249. 4-48 Characterizing Assays 4-48 Viscosity Curves HYSYS accepts viscosities for assay data at two specified temperatures and therefore provides two radio buttons, Viscosity1 and Viscosity2, in the Input Data group. You can input data for one or both of the viscosity curves. Each radio button brings up identical sets of objects, specific to assay data at the designated temperature. Temperatures are entered in the Temperature field with default values being 100 and 210°F. This implies that you have determined the viscosity at 100 or 210°F for each of your assay portions (10%, 20%, etc.). In the Viscosity Curves group box, you can specify which curve (or both) you want to use by selecting the appropriate radio button. The Assay Input Table property view, which is opened when the Edit Assay button is selected, is filled in with the assay data. The form of this property view is the same regardless of whether you have specified Independent or Dependent data. However, if you specified Dependent data, the Assay Percents that you defined for the distillation data are automatically entered in the table. Figure 4.24
- 250. HYSYS Oil Manager 4-49 4-49 You may also define the viscosity unit type. The Units Type can be one of the following: Depending on the shape of the curve, intermediate values for HYSYS' internal working curve are interpolated using either a third or fourth order Lagrange polynomial fit of your input curve, while points outside your data are extrapolated. You may select the extrapolation method for the fit of your input curve on the Calculation Defaults tab: Least Squares, Lagrange or Probability. The defaults for a new assay may be modified by clicking the Oil Input Preferences… button on the Assay tab of the Oil Characterization property view. The same property view may also be accessed from the Simulation environment by the following sequence: 1. Select Tools-Preferences command from the menu bar. 2. On the Session Preferences property view, go to the Oil Input tab. 3. Select the Assay Options page. Unit Type Description Dynamic Conventional viscosity units (e.g., - cP) Kinematic Ratio of a fluid's viscosity to its density (e.g.,- stoke, m2 /s)
- 251. 4-50 Characterizing Assays 4-50 4.5.2 Calculation Defaults Tab The Calculation Defaults tab is shown below: The internal TBP curve is not stored with the assay. The Calculation Defaults tab contains three main groups: • Conversion Methods • Corrections for Raw Lab Data • Extrapolation Methods Conversion Methods Group HYSYS generates all of its physical and critical properties from an internally generated TBP curve at atmospheric conditions. Regardless of what type of assay data you provide, HYSYS always converts it to an internal TBP curve for the characterization procedure. For ASTM D86 and ASTM D2887 assays types, you may specify the inter-conversion or conversion methods used in the Conversion Methods group. Figure 4.25
- 252. HYSYS Oil Manager 4-51 4-51 The group consists of the following two drop-down lists: Corrections for Raw Lab Data Group In this group, two correction methods are available for previously uncorrected laboratory data: Field Description D86-TBP (Interconversion) There are four interconversion methods available: • API 19741 • API 19872 • API 19943 • Edminster Okamoto 19594 D2887-TBP (Interconversion) There are three interconversion methods available: • API 19875 • API 1994 Indirect6 • API 1994 Direct7 Correction Description Apply Lab Barometric Pressure Correction ASTM D86 data that is generated above sea level conditions must be corrected for barometric pressure. If this is not done by the laboratory, select the Yes radio button from the subgroup and HYSYS performs the necessary corrections. Enter the ambient laboratory barometric pressure in the Lab Barometric Pressure field and HYSYS corrects your ASTM distillation data to 1atm before applying the API Data Book conversions for ASTM D86 to TBP distillation. Apply ASTM D86 API Cracking Correction API no longer recommends using this correction: The ASTM cracking correction is designed to correct for the effects of thermal cracking that occur during the laboratory distillation. If this is not done by the laboratory, select the Yes radio button, and HYSYS performs the necessary corrections. This correction is only applied to ASTM D86 temperatures greater than 485°F (250°C). The API cracking correction should not be applied to ASTM D86 distillations that extend beyond 900°F (500°C), due to the exponential nature of the correction.
- 253. 4-52 Characterizing Assays 4-52 Extrapolation Methods Group HYSYS allows you to choose the extrapolation method used for the different Assays (i.e., Distillation and the Molecular Weight, Density and Viscosity property curves). There are three methods available: This group also allows you to specify which end of the curve to apply the extrapolation method. There are three choices available: • Upper end • Lower end • Both ends Extrapolation Method Uses Lagrange For assays representing cuts (i.e., naphtha) or assays for properties other than Boiling Temperature. Least Squares The Least Squares method is a lower order Lagrange method. For this method, the last five input points are used to fit a second order polynomial. If the curvature is negative, a straight line is fit. Probability Use the Probability extrapolation method in cases when your Boiling Temperature assay represents a full range crude and the data is relatively flat. For instance, the data in the distillation range of your assay (i.e., 10% to 70%) may be relatively constant. Instead of linearly extending the curve to the IBP and FBP, the Probability method only considers the steep rise from the FBP. Temperature Assay% Known Part of Curve Extrapolated Part
- 254. HYSYS Oil Manager 4-53 4-53 4.5.3 Working Curves Tab The third tab of the Assay view is the Working Curves tab. After the Assay is calculated, you can view the Assay Working Curves: Recall that the working curves are interpolated using either a third or fourth order Lagrange polynomial fit of your input curve, while the method used to extrapolate points outside your data depends on the type of curve (Mass Density, Viscosity, Molecular Weight). You select the method for the fit of your input curve: Least Squares, Lagrange or Probability. HYSYS always uses 50 points in the calculation of the working curves, but the molar distribution varies depending on the data you provide. In cases where there is a region with a steep gradient, HYSYS moves more points to that region, but still uses 50 points. Figure 4.26
- 255. 4-54 Characterizing Assays 4-54 4.5.4 Plots Tab Following the Working Curves tab is the Plots tab, on which you can view any of the input data curves in a graphical format. The Property drop-down list, shown above, displays the options available for the y-axis of the plot. The Distillation option shows the boiling temperature input according to the Assay Type chosen (i.e., TBP, ASTM D86, etc.). The x-axis displays the Assay% on a basis consistent with the format of your input. An example of a distillation boiling point curve is shown in the figure below. All of the entered data point pairs and the interpolated values are drawn on the plot. Figure 4.27 Figure 4.28 The User Property option is only available if a User Property is created and a User Curve is defined in the Assay.
- 256. HYSYS Oil Manager 4-55 4-55 To make changes to the appearance of the plot, object inspect the plot area. From the menu that appears, select Graph Control. 4.5.5 Correlations Tab The Correlations tab of the Assay property view is shown below: The correlations tab consists of the following objects: Figure 4.29 Object Description Selected Correlation Set By default, this is Default Set (if you have changed the name of the default set, that name is displayed). You can select another correlation set from the Selected drop-down list, but first you must define one on the Correlation tab of the Oil Characterization property view. You can define new correlations sets via the Correlation tab, accessible from the main Oil Characterization property view. Low and High End Temperature This is the range for which the Correlations are applied. If you split the range, then more than one temperature range is displayed. You can edit the temperature of defined splits for custom Correlation Sets on this tab. MW The MW correlation is displayed. You cannot change the correlation in this property view; this can be done from the Correlation tab accessible from the main Oil Characterization property view or by clicking the Edit button. You can change only the name of the default set. If you want to change any correlations, you must create a new correlation set. For details on the various Graph Control options, refer to Section 10.4 - Graph Control of the HYSYS User Guide. Refer to Section 4.8.1 - Correlation Tab for more information.
- 257. 4-56 Characterizing Assays 4-56 Only the molecular weight and specific gravity correlations are required in the calculation of the working curves. The critical pressure, critical temperature, acentricity, and ideal enthalpy correlations are also displayed on the Assay property view, as these are applicable only in the calculation of the hypocomponent properties. If you supply molecular weight or density curves, then their respective correlations are not required. You do not have a choice of correlations for calculating the viscosity curves. SG The specific gravity (density) correlation is displayed. You cannot change the correlation in this property view; this can be done from the Correlation tab accessible from the main Oil Characterization property view or by clicking the Edit button. Tc, Pc, Acc. Factor, Ideal H The critical temperature, critical pressure, acentricity and Ideal Enthalpy correlations are displayed. You cannot change correlations on this tab; this can be done in the Correlation property view accessible from the main Oil Characterization property view. To edit the Selected Correlation Set from this tab, click the Edit button. This takes you to the Correlation property view. Although a Correlation set contains methods for all properties, the Correlation tab, as seen on the Assay and Blend property views, displays only the properties appropriate to that step in the Characterization process. Object Description
- 258. HYSYS Oil Manager 4-57 4-57 4.5.6 User Curves Tab The User Curves tab of the Assay property view is shown below: The available and selected User Properties are displayed in the left portion of the property view. User Properties are defined on the User Property tab of the Oil Characterization property view. There are two elements to a User Curve: • The definition of how the property value is calculated for a stream (mixing rule). • The assay/property value information that is supplied for a given assay. The property definition (see Section 4.7 - User Property for details) is common to all assays. After a User Property is defined, you can add it to the Assay by highlighting it and selecting the Add button. To remove a User Property from the current Assay, highlight it and select the Remove button. Double-clicking on a User Property name in the selection list opens the User Property property view as described in Section 4.7.2 - User Property Property View. Figure 4.30 See Light Ends Handling & Bulk Fitting for details on the Light Ends Handling & Bulk Fitting Options button.
- 259. 4-58 Characterizing Assays 4-58 After adding a User Property, you can edit the User Curve Data: 4.5.7 Notes Tab HYSYS provides a tab where you can enter a description of the Assay for your own future reference. This can also be accessed through the notes manager. User Curve Data Description Table Type This is either Dependent or Independent. If you select Dependent, the Assay Percents are automatically set to the values you specified for the Boiling Temperature assay (Input Data tab). If the table type is Dependent and you change the assay percents on this tab, this also changes the assay percents in the Distillation boiling temperature matrix and for any other dependent curve. Bulk Value Specify a Bulk Value. If you do not want to supply a bulk value for the user property, ensure that this cell reads <empty> by placing the cursor in that cell and pressing the DELETE key. Extrapolation Method This field allows you to choose the extrapolation method used for the selected user property in the current assay. The available choices are: • Least Squares • Lagrange • Probability Apply To This field allows you to choose which end of the curve to apply the extrapolation method to. There are three choices available: • Upper end • Lower end • Both ends User Property Table Provide the Assay percents and User Property Values in this table. At least five pairs of data are required.
- 260. HYSYS Oil Manager 4-59 4-59 4.6 Hypocomponent Generation The Cut/Blend tab of the Oil Characterization property view is shown below: The Available Blends are listed in the left portion of the property view. The following Blend manipulation buttons are available: Figure 4.31 For a highlighted Blend, you can edit the name and provide a description in the Blend Information group. Button Description View Edit the currently highlighted Blend. Add Create a new Blend. Delete Erase the currently highlighted Blend. HYSYS does not prompt for confirmation when deleting a Blend, so be careful when you are using this command. Clone Create a new Blend with the same properties as the currently highlighted Blend. HYSYS immediately opens a new Blend property view.
- 261. 4-60 Hypocomponent Generation 4-60 As described in the Oil Characterization property view section, the general buttons at the bottom of the property view are: • The Clear All button is used to delete all Oil Characterization information. • The Calculate All button re-calculates all Assay and Blend information. • The Oil Output Settings... button allows you to change IBP, FBP, ASTM D86, and ASTM D2887 interconversion methods for output related calculations. In the following sections, each tab of the Blend property view (accessed through the View or Add buttons) is described. 4.6.1 Data Tab The Cut/Blend characterization in HYSYS splits internal working curves for one or more assays into hypocomponents. Once your assay information is entered through the Assay view, you must Add a Blend and transfer at least one Assay to the Oil Flow Information table to split the TBP working curve(s) into discrete hypocomponent. The first tab of the Blend property view is shown below: Figure 4.32 All Boiling Point information supplied in an assay is converted to TBP format.
- 262. HYSYS Oil Manager 4-61 4-61 Assay Selection A list of the available Assays is shown in the left portion of the property view. You can choose an assay by highlighting it and clicking the Add button. It is removed from the Available Assays list and added to the Oil Flow Information table, which displays the following information: You can remove an Assay from the Oil Flow Information table by highlighting it and selecting the Remove button. Oil Flow Information Description Oil The name of the Assay is displayed in this column. There is no limitation to the number of assays that can be included in a single blend or to the number of blends that can contain a given assay. Each blend is treated as a single oil and does not share hypocomponent with other blends or oils. Flow Units You can select the Flow Basis (Mole, Mass or Liquid Volume) here. If you have several Assays, it is not necessary that they have the same Flow Basis. Flow Rate Enter the flow rate; you can use any units (with the same basis); they are converted to the default. You are allowed to define a flowsheet stream for each constituent assay in a blend. To view an Assay, double-click on the Assay name, either in the Available Assays list, or in the Oil column of the Oil Flow Information table.
- 263. 4-62 Hypocomponent Generation 4-62 Bulk Data The Bulk Data button becomes available when more than one assay is present in the Oil Flow Information table. HYSYS allows you to provide the following bulk data for a blend on the Bulk Values property view: • Molecular Weight • Mass Density • Watson (UOP) K • Viscosities at 2 temperatures The Bulk Data feature is particularly useful for supplying the bulk viscosities of the blend, if they are known. Cut Ranges You have three choices for the Cut Option Selection: These methods are described in detail later in this section. Figure 4.33 Cut Options Description Auto Cut HYSYS cuts the assay based on internal values. User Ranges You specify the boiling point ranges and number of cuts per range. User Points You specify only how many hypocomponent you require. HYSYS proportions the cuts according to an internal weighting scheme.
- 264. HYSYS Oil Manager 4-63 4-63 You can specify as many components as you want, within the limitations of the available memory. Whether specified or calculated internally, each cut point is integrated to determine the average (centroid) boiling point. The centroid is always determined using HYSYS' internally generated TBP curve on a weight basis. Although the external procedure for blending assays is almost identical with that for cutting a single assay, HYSYS' internal procedure is somewhat different. After HYSYS has converted each assay to a TBP vs. weight percent curve, all of the individual curves are combined to produce a single composite TBP curve. This composite curve is then used as if it were associated with a single assay; hypocomponents are generated based on your instructions. These hypocomponents are now common to the blended oil and all the constituent oils. For each of the constituent oils, HYSYS back calculates the compositions that correspond to these hypocomponents. This procedure is recommended whenever recombining product oils or fractions to produce a single inlet stream, for example in generating a feed for an FCCU main fractionator from analyzes of the product streams. The major advantage to blending is that fewer hypocomponents are used to represent a given feed When you re-cut an oil, HYSYS will automatically update the associated flowsheet streams with the new hypocomponents when you leave the Basis Environment. Caution should be exercised when blending some combinations of analyzes. An inherent advantage, as well as limitation, of blending is that all constituent oils share a common set of hypocomponent and therefore physical property characteristics. Any analyzes that have large overlapping TBP curves and very different physical property curves should not be blended (for example, hydrocracker recycles and feedstocks have similar TBPs but very different gravity curves). The physical properties of components for overlapping areas represent an average that may not represent either of the constituent assays.
- 265. 4-64 Hypocomponent Generation 4-64 because duplicate components for overlapping TBP curves are eliminated. A second advantage is that the composite TBP curve tends to smooth the end portions of the individual assay curves where they may not be as accurate as the middle portions of the curves. Recommended Boiling Point Widths The following table is a guideline for determining the number of splits for each boiling point range. These are based upon typical refinery operations and should provide sufficient accuracy for most applications. You may want to increase the number of splits for ranges where more detailed fractionation is required. Regardless of your input data, it is recommended that you limit your upper boiling range to 1650°F (900°C). All of the critical property correlations are based on specific gravity and normal boiling points and thus, NBPs above this limit may produce erroneous results. The critical pressure correlations control this limit. There is no loss in accuracy by lumping the heavy ends because incremental changes in solubility of lighter components are negligible and this range is generally not be fractionated. HYSYS allows you to assign the overall blend composition and/or individual assay compositions to streams via the Install Oil tab (Section 4.8.3 - Install Oil Tab). Cutpoint Range Boiling Point Width Cuts/100°F IBP to 800°F (425°C) 25°F (15°C) per cut 4 800°F to 1200°F (650°C) 50°F (30°C) per cut 2 1200°F to 1650°F (900°C) 100°F (55°C) per cut 1
- 266. HYSYS Oil Manager 4-65 4-65 Auto Cut If you select the AutoCut option, HYSYS performs the cutting automatically. HYSYS uses the boiling point width guidelines, as shown previously: User Points If you select User Points from the Cut Option Selection drop- down list, HYSYS performs the cutting process depending on the number of cuts you specify. Enter the total number of cuts you want to use for the oil in the appropriate field. All splits are based upon TBP temperature, independent of the source or type of assay data. HYSYS proportions the cuts according to the following table: The internal weighting produces more hypocomponents per 100°F range at the lower boiling point end of the assay. For example, given a TBP temperature range of 100°F to 1400°F and 38 components requested, HYSYS produces 28 components for the first range, eight components for the second range and two components for the last range: (800 - 100) / 100 * 4 = 28 (1200 - 800) / 100 * 2 = 8 (1400 - 1200) / 100 * 1 = 2 Range Cuts 100 - 800°F 28 800 - 1200°F 8 1200 - 1600°F 4 Cutpoint Range Internal Weighting IBP - 800°F (425°C) 4 per 100°F 800°F - 1200°F (650°C) 2 per 100°F 1200°F to FBP 1 per 100°F
- 267. 4-66 Hypocomponent Generation 4-66 User Ranges If you want to define cutpoint ranges and specify the number of hypocomponent in each range, select User Ranges and HYSYS displays the Ranges Selection information as shown in the figure below. The IBP and FBP are shown above and these values correspond to the initial boiling point and the final boiling point of HYSYS' internal TBP working curve. At this point all light ends are removed (if requested) and the IBP presented is on a light ends free basis. The IBP and FBP of the internal TBP curve used for the column operation's cutpoint specifications and the boiling point tables are determined in this manner. If the first or last hypocomponent has a volume fraction larger than that defined by the endpoints for the IBP or FBP respectively, the TBP curve is extrapolated using a spline fit. You may supply the Initial Cut Point; however, if this field is left blank, HYSYS uses the IBP. HYSYS combines the material boiling between the IBP and the initial cutpoint temperature with the material from the first cut to produce the first component. This component has an NBP centroid approximately half way between these boundaries. The next parameters that you must supply are the upper cutpoint temperature and the number of cuts for the first Figure 4.34 Refer to the Boiling Ranges Section 4.4 - Oil Characterization Property View for definitions of the IBP and FBP.
- 268. HYSYS Oil Manager 4-67 4-67 cutpoint range. As shown in Figure 4.34, the upper cutpoint temperature for the first range also corresponds to the lower boiling point of the second cutpoint range, so it does not have to be re-entered. After the first cut range is defined, only the upper cutpoint temperature and the number of cuts need to be supplied for the remaining ranges. If the final cutpoint temperature is not equal to or greater than the FBP, HYSYS combines the material between the FBP and the last cut temperature with the material in the last component. For example, assume that the IBP and FBP are 40 and 1050°F respectively, the initial cut temperature is 100, the upper limit for the first cut is 500 degrees, and the number of cuts in the first range is eight. Since the boiling width for each component in the first cut range is 50°F (i.e., [500-100]/8), the first component's NBP is at the centroid volume of the 40 to 150 cut, in this case approximately 95°F. The remaining components have NBP values of approximately 175, 225, 275, 325, 375, 425 and 475°F. The upper temperature for the second range is 1,000 and the number of cuts is equal to 5. Since the FBP is 1050, the material in the boiling range from 1,000 to 1,050 is included with the last component.
- 269. 4-68 Hypocomponent Generation 4-68 4.6.2 Correlations Tab The Correlations tab of the Blend property view is shown in the figure below: The Correlations tab consists of the following objects: Figure 4.35 As in the Assay Oil characterization, you can only change the name of the default set. If you want to change any correlations, you must create a new correlation set. Object Description Selected Correlation Set By default, this is Default Set (if you have changed the name of the default set, that name is displayed). You can select another correlation set from the Selected drop-down list, but first you must define one on the Correlation tab of the Oil Characterization property view. You can define new correlations sets via the Correlation tab, accessible from the main Oil Characterization property view. See Section 4.8.1 - Correlation Tab. Low and High End Temperature This is the range for which the Correlations are applied. If you split the range, then more than one temperature range is displayed. You can edit the temperature of defined splits for custom Correlation Sets on this tab.
- 270. HYSYS Oil Manager 4-69 4-69 The critical pressure, critical temperature, acentricity and ideal enthalpy correlations are required in the Blend calculation (or more specifically, in the calculation of hypocomponent properties). In the calculation of hypocomponent properties, the molecular weight and specific gravity (and viscosity) are estimated from their respective working curves. MW The MW correlation is displayed. You cannot change the correlation in this property view; this can be done from the Correlation tab accessible from the main Oil Characterization property view or by clicking the Edit button. You can change only the name of the default set. If you want to change any correlations, you must create a new correlation set. SG The specific gravity (density) correlation is displayed. You cannot change the correlation in this property view; this can be done from the Correlation tab accessible from the main Oil Characterization property view or by clicking the Edit button. Tc, Pc, Acc. Factor, Ideal H The critical temperature, critical pressure, acentricity and Ideal Enthalpy correlations are displayed. You cannot change correlations on this tab; this can be done in the Correlation property view accessible from the main Oil Characterization property view. To edit the Selected Correlation Set from this tab, click the Edit button. This takes you to the Correlation property view. Object Description
- 271. 4-70 Hypocomponent Generation 4-70 4.6.3 Tables Tab After calculating a Blend, you can examine various property and flow summaries for the generated hypocomponent that represent a calculated oil. From the Table Type drop-down list, you can select any one of the following: Figure 4.36 Table Type Description Component Properties With this Table Type selection, you can select one of the two radio buttons in the Table Control group: • Main Properties. Provides the normal boiling point, molecular weight, density and viscosity information for each individual component in the oil. • Other Properties. Provides the critical temperature, critical pressure, acentric factor, and Watson K factor for each individual hypocomponent. Component Breakdown Provides individual liquid volume%, cumulative liquid volume%, volume flows, mass flows and mole flows, for the input light ends and each hypocomponent in the oil. Molar Compositions Provides the molar fraction of each light end component and each hypocomponent in the oil.
- 272. HYSYS Oil Manager 4-71 4-71 4.6.4 Property Plot Tab HYSYS can plot various properties versus liquid volume, mole or mass percent distilled. The x-axis choice is made from the Basis drop-down list. Any of the following options may be plotted on the y-axis by making a selection from the Property drop-down list: • Distillation. A table appears in which you can select which boiling point curves to examine. Select the checkbox of each curve you want displayed. The options include: TBP, ASTM D86, D86(Crack Reduced), ASTM D1160(Vac), ASTM D1160(Atm) and ASTM D2887. • Molecular Weight • Density • Viscosities at 100 and 210°F (or the input temperature) • Critical Temperature • Critical Pressure • Acentric Factor • User Property. A table appears to allow you the choice of which user property to plot. Oil Properties For this selection, you can select the Basis (liquid volume, molar or mass) in the Table Control group box. There are also three radio buttons, each producing a different table: • Distillation. Provides TBP, ASTM D86, D86 Crack Reduced, ASTM D1160 (Vac), ASTM D1160 (Atm), and ASTM D2887 temperature ranges for the oil. • Other Properties. Provides critical temperature, critical pressure, acentric factor, molecular weight, density and viscosity ranges for the oil. • User Properties. Provides all user property ranges for the oil. Oil Distributions Provides tabular information on how your assay would be roughly distributed in a fractionation column. Examine the End Temperatures of the various ranges as well as the Cut Distributions. You can select the basis for the Cut Distribution Fractions (Liquid Volume, Molar, Mass) in the Table Control group. The radio buttons provide the option of standard fractionation cuts or user defined cuts: • Straight Run. Lists crude column cuts: Off gas, LSR Naphtha, Naphtha, Kerosene, Light Diesel, Heavy Diesel, Atmos Gas Oil and Residue. • Cycle Oil. Lists Cat Cracker cycle oils: Off Gas, LC Naphtha, HC Naphtha, LCGO, ICGO, HCGO, Residue 1 and Residue 2. • Vacuum Oil. Lists vacuum column cuts: Off Gas, LVGO, HVGO and 5 VAC Residue ranges. • User Custom. Allows for the definition of customized temperature ranges. If changes are made to the information in any of the standard fractionation cuts, the radio button will automatically switch to User Custom. Table Type Description
- 273. 4-72 Hypocomponent Generation 4-72 Click the Clone and shelf this plot button to store the current plot. HYSYS automatically names the plot with the following format: 'the name of the active blend'-'number of plots created'. For instance, the first plot created for Blend-1 would be named Blend-1-0, and any subsequent plots would have the number after the dash incrementally increased. To edit plot labels, you must clone the plot using the Clone and shelf this plot button. The BlendPlot appears and is stored in the Plot Summary tab. An example of a TBP curve on a liquid volume basis for an oil is shown below. Plot labels can not be modified within the Property Plot tab Blend property view. Figure 4.37 Refer to the Section 4.6.7 - Plot Summary Tab section for information concerning the Plot Summary tab.
- 274. HYSYS Oil Manager 4-73 4-73 4.6.5 Distribution Plot Tab HYSYS can also plot a distribution bar chart so you can study how your assay would be roughly distributed in a fractionation column. Straight Run, Cycle Oil, Vacuum Oil and User Custom TBP cutpoints are available distribution options, as shown by the radio buttons in the Cut Input Information group. You can choose the Basis for the Cut Distribution Fractions (Liquid Volume, Molar, Mass) in the Plot Control group. Click the Clone and shelf this plot button to store the current plot. HYSYS automatically names the plot with the following format: ‘the name of the active blend'-'number of plots created'. For example, the first plot created for Blend-1 is named Blend- 1-0, and any subsequent plots would have the number after the dash incrementally increased. All stored plots are listed on the Plot Summary tab. To edit plot labels, you must clone the plot using the Clone and shelf this plot button. The BlendPlot appears and is stored in the Plot Summary tab. Figure 4.38 Plot labels can not be modified within the Distribution tab Blend property view. Refer to the Section 4.6.7 - Plot Summary Tab for information concerning the Plot Summary tab.
- 275. 4-74 Hypocomponent Generation 4-74 If changes are made to the names or end temperatures in any of the standard fractionation cuts, the radio button automatically switches to User Custom. An example distribution plot is shown in the following figure. 4.6.6 Composite Plot Tab The Composite Plot tab allows you to visually check the match between the input assay data and the calculated property curves. The choice for the graphical comparison is made from the Property drop-down list: • Distillation • Molecular Weight • Density • Viscosity • User Property Click the Clone and shelf this plot button to store the current plot. HYSYS automatically names the plot with the following format: 'the name of the active blend'-'number of plots created'. For example, the first plot created for Blend-1 is named Blend- 1-0, and any subsequent plots have the number after the dash incrementally increased. All stored plots are listed on the Plot Summary tab. Figure 4.39 Refer to the Section 4.6.7 - Plot Summary Tab for information concerning the Plot Summary tab.
- 276. HYSYS Oil Manager 4-75 4-75 To edit plot labels, you must clone the plot using the Clone and shelf this plot button. The BlendPlot appears and is stored in the Plot Summary tab. An example molecular weight curve comparison is shown in the following figure. The calculated molecular weight lies above the input curve (instead of over-laying it) because the calculated curve has been shifted to match an input bulk MW. 4.6.7 Plot Summary Tab On this tab, you can view the list of stored plots for the current blend. From the Created Plots group you can access any stored plots or remove plots from the list. The list of created plots are generated from the Property, Distribution, and Composite Plots tabs and shown on the left. Access a plot by double-clicking on its name or by right-clicking its name and selecting View from the object inspect menu. From the BlendPlot property view, you can edit plot labels by Plot labels can not be modified within the Composite tab Blend property view. Figure 4.40
- 277. 4-76 User Property 4-76 right-clicking and selecting the graph control option. This method of modifying plots is preferable, since you can plot what you want and that there is a single location for viewing them. The cloned plots are independent, thus the labels can be modified and are not overwritten. The plotted data for the cloned plots is also updated as the blend changes. Click the Remove button to remove a selected plot from the list. Only one plot can be removed from the list at a time. 4.6.8 Notes Tab HYSYS provides a tab where you can enter a description of the Blend for your own future reference. 4.7 User Property A User Property is any property that can be defined and subsequently calculated on the basis of compositions. Examples for oils include R.O.N. and Sulfur content. During the characterization process, all hypocomponents are assigned an appropriate property value. HYSYS then calculates the value of the property for any flowsheet stream. This enables User Properties to be used as Column specifications. After User Properties are installed, you can then supply assay information as for Viscosity, Density or Molecular Weight Curves. There is no confirmation message when you click the Remove button. Refer to Section 4.5.6 - User Curves Tab for an explanation of attaching User Properties to existing Assays.
- 278. HYSYS Oil Manager 4-77 4-77 4.7.1 User Property Tab The User Property tab of the Oil Characterization property view is shown below: The Available User Properties are listed in the left portion of the property view. The following User Property manipulation buttons are available: The general buttons at the bottom of the property view are: • The Clear All button is used to delete all Oil Characterization Information. • The Calculate All button re-calculates all Assay and Blend information. • The Oil Output Settings... button allows you to change IBP, FBP, ASTM D86, and ASTM D2887 interconversion methods for output related calculations. Figure 4.41 Button Description View Edit the currently highlighted User Property. Add Create a new User Property (see the following section, User Property Property View). Delete Erase the currently highlighted User Property. HYSYS does not prompt for confirmation when deleting a User Property. Clone Create a new User Property with the same properties as the currently highlighted User Property. HYSYS immediately opens a new User Property property view.
- 279. 4-78 User Property 4-78 For a highlighted User Property, you can edit the name and provide a description. 4.7.2 User Property Property View When you first open this property view, the Name field has focus. The name of the User Property must be 12 characters or less. Figure 4.42 Refer to Chapter 7 - User Properties for detailed information on User Properties.
- 280. HYSYS Oil Manager 4-79 4-79 Equation Parameters The following options are available for the Basic user prop definition group: Parameter Description Mixing Basis You have the following options: Mole Fraction, Mass Fraction, Liquid Volume Fraction, Mole Flow, Mass Flow, and Liquid Volume Flow. All calculations are performed using compositions in HYSYS internal units. If you have specified a flow basis (molar, mass or liquid volume flow), HYSYS uses the composition as calculated in internal units for that basis. For example, a User Property with a Mixing Basis specified as molar flow is always calculated using compositions in kg mole/s, regardless of what the current default units are. The choice of Mixing Basis applies only to the basis that is used for calculating the property in a stream. You supply the property curve information on the same basis as the Boiling Point Curve for your assay. Mixing Rule Select from one of three mixing rules: where: Pmix = total user property value P(i) = input property value for component x(i) = component fraction or flow, depending on the chosen Mixing Basis f1, f2 = specified constants Mixing Parameters The mixing parameters f1 and f2 are 1.00 by default. You may supply any value for these parameters. Unit Type This option allows you to select the variable type for the user property. For example, if you have a temperature user property, select temperature in the unit type using the drop-down list. Refer to Chapter 7 - User Properties for more detail on the Mixing Rules. Pmix ( ) f 1 f 2 x i ( )P i ( ) f 1 ( ) i 1 = N ∑ = Pmix ( ) f 1 f 2 x i ( ) P i ( ) ( ) f 1 ln ( ) i 1 = N ∑ = f1 Pmix • 10 f2 Pmix • + x i ( ) f1 P i ( ) • 10 f2 P i ( ) • + ( ) i 1 = N ∑ =
- 281. 4-80 User Property 4-80 Component User Property Values If you want, you may provide a Property value for all of the Light End components you defined in the Property Package. This is used when calculating the property value for each hypocomponent (removing that portion of the property curve attributable to the Light Ends components). On this property view, you do not provide property curve information. The purpose of this property view is to instruct HYSYS how the User Property should be calculated in all flowsheet streams. Whenever the value of a User Property is requested for a stream, HYSYS uses the composition in the specified basis, and calculate the property value using your mixing rule and parameters. Notes Tab HYSYS provides a tab where you can enter a description of the User Properties for your own future reference. Once you have calculated a Blend which includes an Assay with your User Property information, the value of the User Property for each hypocomponent is displayed in the Component User Property Values group.
- 282. HYSYS Oil Manager 4-81 4-81 4.8 Correlations & Installation 4.8.1 Correlation Tab HYSYS allows you to choose from a wide variety of correlations to determine the properties of the generated hypocomponent. From the Correlation tab of the Oil Characterization property view, you can create customized Correlation Sets. The Available Correlation Sets are listed on the left side of the property view. The following Correlation manipulation buttons are available: Figure 4.43 Buttons Description View Edit the currently highlighted Correlation Set. Add Create a new Correlation Set (see the following section, Correlation Set Property View). Correlation sets can also be viewed through the Assay tab - Correlations and Cut/ Blend tab - Correlations tab.
- 283. 4-82 Correlations & Installation 4-82 For a highlighted Correlation Set, you can edit the name and provide a description. The general buttons at the bottom of the property view are: • The Clear All button is used to delete all Oil Characterization Information. • The Calculate All button re-calculates all Assay and Blend information. • The Oil Output Settings... button allows you to change IBP, FBP, ASTM D86, and ASTM D2887 interconversion methods for output related calculations. 4.8.2 Correlation Set Property View When you create or edit a Correlation Set, the following property view appears: Delete Erase the currently highlighted Correlation Set. HYSYS does not prompt for confirmation when deleting a Correlation Set. Clone Create a new Correlation Set with the same properties as the currently highlighted Correlation Set. HYSYS immediately opens a new Correlation Set property view. Figure 4.44 Buttons Description Refer to Section 4.8.2 - Correlation Set Property View, for more information
- 284. HYSYS Oil Manager 4-83 4-83 When you first open this property view, the Name field has focus. The name of the Correlation Set must be 12 characters or less. Correlations and Range Control Changes to the Molecular Weight or Specific Gravity correlations are applied to the curve (Assay), while the critical temperature, critical pressure, acentric factor and heat capacity correlations apply to the Blend's hypocomponent properties. Changes to the Assay correlations have no effect when you have supplied a property curve (e.g., Molecular Weight); they only apply in the situation where HYSYS is estimating the properties. • The Working Curves are calculated from the Assay data, incorporating the Molecular Weight and Specific Gravity correlations. • The Hypocomponents are generated based on your cut option selections. • Finally, the hypocomponent properties are generated: • The NBP, molecular weight, density and viscosity are determined from the Working curves. • The remaining properties are calculated, incorporating the critical temperature, critical pressure, acentric factor and heat capacity correlations. To change a correlation, position the cursor in the appropriate column and select a new correlation from the drop-down list. You cannot change the correlations or range for the Default Correlation Set. If you want to specify different correlations or temperature ranges, you must create a new Correlation Set.
- 285. 4-84 Correlations & Installation 4-84 The table below shows the HYSYS defaults and available options for these properties. You have the choice of changing a property correlation over the entire range, or making a certain correlation valid for a particular boiling point range only. To split correlations over Property Default Correlation Optional Correlations MW Twu • Lee-Kesler • Aspen • Penn State • Katz-Firoozabadi • Hariu-Sage • API • Robinson-Peng • Whitson • Riazi-Daubert • Bergman • Katz-Nokay • Modified Kesler- Lee • Aspen least- squares • Twu Pc Lee-Kesler • Rowe • Standing • Lyderson • Penn State • Mathur • Twu • Cavett • Riazi-Daubert • Edmister • Bergman • Aspen Tc Lee-Kesler • Rowe • Standing • Nokay • Penn State • Mathur • Spencer-Daubert • Chen-Hu • Meissner-Redding • Cavett • Riazi-Daubert • Edmister • Bergman • Aspen • Roess • Eaton-Porter • Twu SG Constant Watson K • Bergman • Yarborough • Lee-Kesler • Bergman-PNA • Hariu-Sage • Katz-Firoozabadi Ideal Enthalpy Lee-Kesler • Cavett • Fallon-Watson • Modified Lee- Kesler Acentric Factor Lee-Kesler • Edmister • Robinson Peng • Bergman The Riazi-Daubert correlation has been modified by Whitson. The Standing correlation has been modified by Mathews- Roland-Katz. The default correlations are typically the best for normal hydrocarbon systems. An upper limit of 1250°F (675°C) is suggested for the heaviest component. Although the equations have been modified to extend beyond this range, some caution should be exercised when using them for very heavy systems. Highly aromatic systems may show better results with the Aspen correlations. Detailed discussions including the range of applicability for the correlations is found in Appendix B - Oil Methods & Correlations.
- 286. HYSYS Oil Manager 4-85 4-85 several boiling ranges click the Add New Range button and the following property view appears. Enter the temperature where you want to make the split into the New Temp cell (in this case 400°C), and select the Split Range button. The temperature is placed in the correlation set, and the Correlation table is split as shown below: You can now specify correlations in these two ranges. • You can add more splits. • You can also delete a split (merge range) by selecting the Remove Range button as shown in Figure 4.46. Figure 4.45 Figure 4.46 When you merge a range, you delete the correlations for the range whose Low End Temperature is equal to the range temperature you are merging.
- 287. 4-86 Correlations & Installation 4-86 Highlighting the appropriate temperature in the Temperature Range list and selecting the Merge Temp Range button removes or merges the temperature range. When you merge a range, any correlations you chose for that range is forgotten. Assay & Blend Association The different components of the Assay and Blend Association group are described below: Notes Tab HYSYS provides a tab where you can enter a description of the Correlations for your own future reference. Any changes to the correlations for an Input Assay results in first the assay being recalculated, followed by any blend which uses that assay. For an existing oil, it will be automatically recalculated/re-cut using the new correlations, and the new components are installed in the flowsheet. Object Description New Assays/Blends If you select this checkbox, all new Assays and Blends that are created use this Correlation Set. Available Assays/ Available Blends These radio buttons toggle between Assay or Blend information. Assay/Blend Table This table lists all Assays or Blends with their associated Correlation Sets, depending on which radio button is selected. You can select the Use this Set checkbox to associate the current Correlation Set with that Assay or Blend. You can also select the Correlation Set for a specific Assay on the Correlation tab of that Assay view.
- 288. HYSYS Oil Manager 4-87 4-87 4.8.3 Install Oil Tab The Install Oil tab of the Oil Characterization property view is shown below: You may install a calculated Blend into your HYSYS case; it appears in the Oil Name column of the table. Simply provide a Stream name for that Blend, and ensure that the Install checkbox is selected. You may use an existing stream name, or create a new one. If you do not provide a name or you cleared the Install checkbox(es), the hypocomponent is not attached to the fluid package. You can install an oil to a specific subflowsheet in your case by specifying this in the Flow Sheet column. Each installed Oil appears in the component list as a series of hypocomponents named NBP[1] ***, NBP[2] ***, with the 1 representing the first oil installed, 2 the second, etc.; and *** the average boiling point of the individual Oil components. HYSYS also assigns the Light Ends composition, if present, in Figure 4.47 If you want to install the hypocomponent into a non- Associated Fluid Package, Add the Oil Hypo group from the Components tab of that Fluid Package property view.
- 289. 4-88 TBP Assay - Example 4-88 the flowsheet stream. When a Blend is installed in a stream, the relative flow rate of each constituent Assay is defined within the Oil Characterization and cannot be changed. However, if you install each of the constituent Assays (represented by Blends with a single Assay) into their own flowsheet stream, various combinations can be examined using Mixer or Mole Balance operations. The flow and composition for each constituent oil is transferred to your designated flowsheet streams. The flow rate of any specified Oil stream (as opposed to the constituents of a Blend) can be changed at any time by re-specifying the stream rate in the flowsheet section. 4.9 TBP Assay - Example In this example, a crude oil with a TBP assay curve extending from 100°F to 1410°F is characterized. Associated with this TBP assay are: • A dependent molecular weight curve • An independent API gravity curve • Two independent viscosity curves, one at 100°F and the other at 210°F • The bulk molecular weight and bulk API gravity • A liquid volume Light Ends assay for the crude oil It is desired to split the assay into 38 hypocomponents, with 25°F cuts between 100 and 800°F, 50°F cuts between 800 and 1200°F, and the remaining portion of the crude assay into two components. The following assay information is available: For Blends that contain more than one Assay - each individual Assay is automatically displayed in the Oil Install Information table. Bulk Crude Properties MW 300 API Gravity 48.75
- 290. HYSYS Oil Manager 4-89 4-89 Light Ends Liquid Volume% Propane 0.0 i-Butane 0.19 n-Butane 0.11 i-Pentane 0.37 n-Pentane 0.46 TBP Distillation Assay Liquid Volume% Temperature (F) Molecular Weight 0.0 80.0 68.0 10.0 255.0 119.0 20.0 349.0 150.0 30.0 430.0 182.0 40.0 527.0 225.0 50.0 635.0 282.0 60.0 751.0 350.0 70.0 915.0 456.0 80.0 1095.0 585.0 90.0 1277.0 713.0 98.0 1410.0 838.0 Dependent property curves have values at the same distillation percentage as the Boiling Temperature assay, but does not need to have values at every percentage. API Gravity Assay Liq Vol% Distilled API Gravity 13.0 63.28 33.0 54.86 57.0 45.91 74.0 38.21 91.0 26.01 Viscosity Assay Liq Vol% Distilled Visc. (cP) 100°F Visc. (cP) 210°F 10.0 0.20 0.10 30.0 0.75 0.30 50.0 4.20 0.80 70.0 39.00 7.50 90.0 600.00 122.30
- 291. 4-90 TBP Assay - Example 4-90 4.9.1 Initialization Before you can start the actual characterization process, you must: 1. Begin a new HYSYS case. 2. Select an appropriate property package. 3. Add any non-oil components, including the Light Ends that are to be used in the characterization process, to the component list. In this case, use the Peng-Robinson equation of state, and select the following components: C3, i-C4, n-C4, i-C5, and n-C5. After you have selected the Light End components, click the Oil Environment icon on the toolbar to enter the Oil Characterization environment. Prior to the input of assay data, a customized Unit Set is created such that the default units used by HYSYS correspond to the assay data units. Create a customized unit set by cloning the Field unit set. Select API as the new unit for both Mass Density and Standard Density and leave all other Field default units as they are. You can view a display of important messages related to the progress of the characterization in the Trace Window. If you want, open the Trace Window at the bottom of the Desktop. Refer to Chapter 2 - Fluid Package for details on installing a fluid package. Oil Environment icon Refer to the Section 12.3.1 - Units Page of the HYSYS User Guide for details on creating a customized unit set. For more information concerning the Trace Window, refer to Section 1.3 - Object Status & Trace Windows of the HYSYS User Guide.
- 292. HYSYS Oil Manager 4-91 4-91 The main property view in the Oil Environment is the Oil Characterization property view, as shown below: The tabs are organized according to the general procedure followed in the characterization of an oil. Completing the characterization requires the following three steps: 1. Access the Assay view by selecting the Add button on the Assay tab of the Oil Characterization property view. Input all of the assay data on the Input Data tab of the Assay view and click the Calculate button. 2. Access the Cut/Blend property view (which also gives you cutting options) by selecting the Add button on the Cut/ Blend tab of the Oil Characterization property view. Cut the assay into the required number of hypocomponent using the cut points outlined previously. 3. Install the calculated oil from the Oil Environment into the flowsheet by accessing the Install Oil tab of the Oil Characterization property view. Although you can access the User Property tab and the Correlation tab from the Oil Characterization property view, neither of these tabs are used in this example. Figure 4.48
- 293. 4-92 TBP Assay - Example 4-92 4.9.2 Step 1 - Input Assay Data On the Assay tab of the Oil Characterization property view, select the Add button. This opens the Assay view and places the active location in the Name cell of the Input Data tab. For this example, change the name of the Assay to Example. The Assay tab is shown below. The first time you enter this property view, it is blank, except for the Bulk Properties field and the Assay Data Type field. Figure 4.49 The layout of this property view depends on: 1. Which Data Type you have selected. This mainly affects what Data Type options are available (Distillation, Light Ends, etc.) 2. Which Input Data radio button you have selected. When you specify that you have Independent or Dependent Molecular Weight, Density or Viscosity data, a new radio button is added to the property view. In this property view, the TBP Data Type is selected and the Distillation radio button is selected.
- 294. HYSYS Oil Manager 4-93 4-93 Defining the Assay The Input Data tab is split into two groups: Assay Definition and Input Data. As its name implies, the Assay Definition group is where the properties of the assay are defined. Since bulk property data is provided, select Used from the Bulk Properties drop-down list. The bulk properties appears in the Input Data group. Next from the Assay Data Type drop-down list, select TBP. The Bulk Props and Distillation radio buttons are now visible. Light ends can be Auto Calculated by HYSYS, however since you are provided with the light ends data, select Input Compositions from the Light Ends drop-down list. Now, set the Molecular Weight, Density and Viscosity curve options in each of the respective drop-down lists. The Molecular Weight curve is Dependent, the Density curve is Independent, and the Viscosity curves are also Independent. As you specify these options, radio buttons corresponding to each curve are added to the Input Data group box. Now that the Assay is sufficiently defined, you can begin entering assay data. Specifying Assay Data Specification of the Assay occurs in the Input Data group. The field and options visible inside the group are dependent on which radio button is selected in the Input Data group. HYSYS calculates internal working curves using the supplied property curve data. For each property curve, you can select the method used for the Extrapolation of the working curve. The Extrapolation method for each working curve is specified in the Curve Fitting Methods group of the Calculation Defaults tab.
- 295. 4-94 TBP Assay - Example 4-94 Bulk Props Select the Bulk Props radio button. Input a Bulk Molecular Weight (300) and Bulk Mass Density (48.75 API_60) as shown in the figure below. No bulk viscosity information is available, so leave the Viscosity cells blank. It is not necessary to delete the Viscosity Temperatures as these are ignored if you do not provide bulk viscosities. Light Ends Next, select the Light Ends radio button. The Input Data group displays a Light Ends Basis drop-down list and a Light Ends Composition table. From the drop-down list, select LiquidVolume as the Light Ends Basis and enter the Light Ends composition as shown below: Figure 4.50 Figure 4.51
- 296. HYSYS Oil Manager 4-95 4-95 Distillation Select the Distillation radio button to view the TBP Distillation assay. To enter the data, click the Edit Assay button. The Assay Input Table property view appears and enter the following assay data: Molecular Weight Select the Molecular Weight radio button to view the Molecular Weight data. Figure 4.52 As you enter values into the table, the cursor automatically moves down after each entry, making it easier to supply all values in each column. Since the Molecular Weight assay is Dependent, the Assay Percentage values that you entered for the Boiling Point Temperature assay are automatically displayed.
- 297. 4-96 TBP Assay - Example 4-96 You need only enter the Molecular Weights as shown below: Density Select the Density radio button to view (or edit) the Density assay. The default density units are displayed, in this case API. The completed API gravity curve input is shown below: Figure 4.53 Figure 4.54
- 298. HYSYS Oil Manager 4-97 4-97 Viscosity Select the Viscosity1 and Viscosity2 radio buttons to view (or edit) the Viscosity assays. When either of these buttons are selected, an additional input box is displayed, which allows you to supply the viscosity temperatures. Make sure the Use Both radio button is selected in the Viscosity Curves group box. The required viscosity input is shown below: Figure 4.55 Ensure that the Viscosity Units Type is Dynamic, and that the two temperatures entered are 100°F and 210°F.
- 299. 4-98 TBP Assay - Example 4-98 Calculating the Assay After entering all of the data, go to the Calculation Defaults tab. The extrapolation methods displayed in the Curve Fitting Methods group. The default extrapolation methods for the working curves are adequate for this assay. To begin the calculation of the assay, press the Calculate button. The status message at the bottom of the Assay view shows the message Assay Was Calculated. Figure 4.56
- 300. HYSYS Oil Manager 4-99 4-99 After the Assay is calculated, the working curves are displayed on the Working Curves tab. The working curves for the normal boiling point, molecular weight, mass density and viscosity are regressed from your input curves. HYSYS uses 50 points in the calculation of the working curves, but the molar distribution varies depending on the data you provide. HYSYS moves more points to a region with a steep gradient. The calculation of the Blend is based on these working curves. You can examine graphical representations of your assay data on the Plots tab. Open the Property drop-down list and select the curve that you would like to view. The default plot is the Boiling Point Temperature (Distillation) curve. Because input data for the boiling temperature, molecular weight, density and viscosity were provided, all of these options are shown in the drop-down list. Figure 4.57 The options available in the Property drop-down list correspond to the property curve data specified on the Input Data tab. If only bulk data is provided, there are no plots available. Refer to Section 4.5 - Characterizing Assays for information on the characterization procedure, working curves and extrapolation methods.
- 301. 4-100 TBP Assay - Example 4-100 Figure 4.58 If multiple assays are blended, repeat the steps outlined in Section 4.9.2 - Step 1 - Input Assay Data.
- 302. HYSYS Oil Manager 4-101 4-101 4.9.3 Step 2 - Cut Assay into Hypocomponents You can now cut the Assay into individual hypocomponents. On the Cut/Blend tab of the Oil Characterization property view, select the Add button. This takes you to the Blend property view with the list of available assays. From the Available Assays group, select Example and click the Add button. This adds the Assay to the Oil Flow Information table, and a Blend (Cut) is automatically calculated. The Blend is calculated because the default Cut Option, Auto Cut, appears as soon as a Blend is added. Since the Cut Option was not changed prior to the addition of the Available Assay to the Blend, HYSYS realizes enough information is available to cut the oil and the calculations occur automatically. Figure 4.59 If you have only one Assay, it is not necessary to enter a Flow Rate in the Oil Flow Information table.
- 303. 4-102 TBP Assay - Example 4-102 Instead of using the default Cut Option, the cut points are defined. From the Cut Option drop-down list, select User Ranges. Enter a Starting Cut Point Temperature of 100°F and fill out the Cut Point table as shown on the left. Click the Submit button to calculate the Blend. The results of the calculation can be viewed on the Tables tab of the Blend property view. The default Table Type is the Component Properties table with the Main Properties radio button selected in the Table Control group. Figure 4.60 Figure 4.61
- 304. HYSYS Oil Manager 4-103 4-103 From the drop-down list, you can also view a Component Breakdown, Molar Compositions, Oil Properties, and Oil Distributions. All of the data that is found on the Tables tab can be viewed graphically from the following three tabs: • Property Plot • Distribution Plot • Composite Plot On the Distribution Plot tab, select Liquid Volume fraction from the Basis drop-down list. The following plot is displayed: Figure 4.62 Figure 4.63 Refer to Section 4.6.3 - Tables Tab for details on the information available on the Tables tab.
- 305. 4-104 TBP Assay - Example 4-104 The Cut Distribution Plot, as shown above, displays the volume fraction of the oil that would be recovered in various products. This graph is particularly useful in providing estimates for distillation products. 4.9.4 Step 3 - Transfer Information to Flowsheet The final step of the characterization is to transfer the hypocomponent information into the flowsheet. On the Install Oil tab of the Oil Characterization property view, enter the Stream Name Example Oil, to which the oil composition is being transferred. HYSYS assigns the composition of your calculated Oil and Light Ends into this stream, completing the characterization procedure. Also, the hypocomponent is placed into a Hypo group named Blend1 and installed in the fluid package. When you leave the Oil Characterization environment, you are placed in the Basis environment. It is here that you can examine individual hypothetical components that make-up your oil. Figure 4.64 Refer to the tab subsections in Section 4.6 - Hypocomponent Generation for information on the available plots.
- 306. HYSYS Oil Manager 4-105 4-105 Enter the Simulation Environment and move to the Workbook to view the stream you just created. The Compositions page displaying the stream Example Oil is shown below. If you decide that some of the hypocomponent parameters need to be recalculated, you can return to the Oil Environment at any time to make changes. To edit an Assay, highlight it on the Assay tab of the Oil Characterization property view, and click the Edit button. If you want to see the effect of using a different correlations on your oil, you can access this information on the Correlation tab of the Oil Characterization property view. Figure 4.65
- 307. 4-106 TBP Assay - Example 4-106 4.9.5 Fluid Package Association In the example shown in Figure 4.66, there is only one fluid package for the flowsheet. Specifying the stream name (Example Oil) not only creates the stream in the flowsheet, but adds the Hypo group (which contains all of the individual hypocomponents) to the fluid package. When there are multiple fluid packages in the simulation, you can specify the one with which the Oil is to be associated (accessed through the Oil Manager tab of the Simulation Basis Manager property view). This serves two functions: first, it identifies which pure components are available for a light ends analysis, and second, it identifies the fluid package to which the Hypo group is being installed. If you do not want to associate the oil to the fluid package, clear the appropriate Associate checkbox. Figure 4.66 In this case, the Oil is Associated with Fluid Package Basis-1
- 308. HYSYS Oil Manager 4-107 4-107 4.10 Sulfur Curve - Example The User Property option in the Oil Characterization environment allows you to supply a property curve and have HYSYS characterize it with an Assay. Each hypocomponent is assigned a property value when the Blend is characterized. You can specify the basis upon which the property should be calculated (mole, mass or liquid volume, and flows or fractions), as well as which mixing rule should be used. In this example, a TBP curve with an associated Sulfur Curve is installed. There is no Light Ends analysis available, so the Auto Calculate Light Ends option is used. 4.10.1 Fluid Package Prior to entering the Oil Characterization environment, create a Fluid Package with Peng-Robinson as the property method and C1, C2, C3, i-C4, and n-C4 as the components. The choice of the Light Ends components is influenced by the Sulfur Curve data (refer to Section 4.10.3 - Install the Assay section).
- 309. 4-108 Sulfur Curve - Example 4-108 4.10.2 Install a User Property Enter the Oil Environment by clicking the Oil Environment icon on the toolbar. To supply a User Curve for an assay, you must first add a User Property. On the User Property tab of the Oil Characterization property view, select Add to access the User Property property view as shown below. The default options are used for the Equation Parameters except for the Mixing Basis field. Sulfur is quoted on a w/w basis so, select Mass Fraction from the drop-down list. HYSYS automatically names and numbers the User Properties. You can provide a descriptive Name for the property, such as Sulfur. HYSYS gives you the option of providing a Component User Property Value for each Light End component. If, for example, Figure 4.67 You can also add a User Property via the User Property tab in the Simulation Basis Manager. Oil Environment icon
- 310. HYSYS Oil Manager 4-109 4-109 this was a Heating Value Property, you would supply each component value at this point. These components do not have a “Sulfur value", so they can be left at 0. 4.10.3 Install the Assay Create an Assay by clicking the Add button on the Assay tab of the Oil Characterization property view. Select TBP as the Assay Data Type, specify a Liquid Volume% as the Assay Basis, and leave the TBP Distillation Conditions group at the default settings. Since no Light Ends analysis is provided, select the Auto Calculate from the Light Ends drop-down list. The Auto Calculate procedure replaces the portion of the TBP curve which is covered by the Boiling Point range of the Light Ends components. In this way, the initial boiling point of the TBP working curve is slightly higher than the normal boiling point of the heaviest Light End component. The TBP curve starts at -25°C. Taking this information into account, Light End components with boiling points that lie within the first two percent of the TBP assay were chosen. In this way, the benefits of the Auto Calculate procedure are gained without losing a significant portion of our property curve. There is no Molecular Weight, Density, or Viscosity data, so you can leave the curve options as Not Used. On the Calculation Defaults tab, the extrapolation method for the Distillation curve can be left at its default, Probability. There are no bulk properties for the assay. Provide the boiling temperature data, as tabulated below: TBP Data Assay% Temp (C) Assay% Temp (C) Assay% Temp (C) 0.02 -25 20.73 180 71.43 500 0.03 -20 24.06 200 73.86 520 0.05 -10 27.55 220 76.22 540 0.31 0 30.93 240 78.46 560 0.52 10 34.32 260 80.57 580
- 311. 4-110 Sulfur Curve - Example 4-110 The Assay view with the TBP Data is shown below: 0.55 20 37.83 280 82.55 600 1.25 30 41.21 300 84.41 620 2.53 40 44.51 320 86.16 640 2.93 50 48.01 340 87.79 660 3.78 60 51.33 360 89.32 680 4.69 70 54.58 380 90.67 700 5.67 80 57.73 400 93.48 750 7.94 100 60.65 420 95.74 800 10.69 120 63.39 440 98.78 900 13.84 140 66.16 460 17.28 160 68.90 480 Figure 4.68 TBP Data Assay% Temp (C) Assay% Temp (C) Assay% Temp (C)
- 312. HYSYS Oil Manager 4-111 4-111 Sulfur Curve On the User Curves tab of the Assay property view, select the Available User Property Sulfur and click the Add button. In the User Curve Data group, select Independent as the Table Type and ensure that the Bulk Value cell displays <empty>. Click the Edit button and enter the Sulfur Curve Data shown below in the Assay Input Table. After this data is entered, click the Calculate button found at the bottom of the Assay property view. Sulfur Curve Data Assay% Sulfur Value Assay% Sulfur Value 0.90 0.032 54.08 2.733 7.38 0.026 55.85 2.691 11.48 0.020 57.17 2.669 16.42 0.083 60.00 2.670 22.40 0.094 64.47 2.806 26.68 0.212 68.40 3.085 31.78 0.616 72.09 3.481 36.95 1.122 75.66 3.912 42.04 1.693 78.99 4.300 47.14 2.354 82.05 4.656 48.84 2.629 84.85 4.984 50.52 2.786 87.38 5.286 52.22 2.796 90.33 5.646
- 313. 4-112 Sulfur Curve - Example 4-112 4.10.4 Create the Blend A Blend is created using the Auto Cut option. On the CutBlend tab of the Oil Characterization property view, select the Add button. On the Data tab of the Blend property view, highlight Assay-1 from the list of Available Assays and click the Add button. The assay is now added to the Oil Flow Information table. The Blend is immediately calculated, as the default Cut Option is Auto Cut. Figure 4.69
- 314. HYSYS Oil Manager 4-113 4-113 4.10.5 Results Finally, the user property is defined and needs to be installed. On the Install Oil tab of the Oil Characterization property view, specify the Stream Name as Example Oil to which the oil composition is transferred. HYSYS assigns the composition of your calculated Oil and Light Ends into this stream, completing the characterization procedure for the User Property. Figure 4.70
- 315. 4-114 Sulfur Curve - Example 4-114 You can return to the User Property tab of the Oil Characterization property view and click the View button to display the Sulfur User Property property view. In the Component User Property Values group, the Property Value is calculated for all the hypocomponents for the blend. You can scroll through the table to view the Property Value for each hypocomponent. Figure 4.71
- 316. HYSYS Oil Manager 4-115 4-115 From the Composite Plot tab of the Blend property view, you can view a plot of the Calculated and Inputted values for the User Property. Select User Property from the Property drop-down list and select the Sulfur checkbox to view the following figure. 4.11 References 1 Figure 3A1.1, Chapter 3, API Technical Data Book, Fourth Edition (1980). 2 Procedure 3A1.1, Chapter 3, API Technical Data Book, Fifth Edition (1987). 3 Procedure 3A1.1, Chapter 3, API Technical Data Book, Sixth Edition (1994). 4 Edmister, W.C., and Okamoto, K.K., “Applied Hydrocarbon Thermodynamics, Part 12: Equilibrium Flash Vaporization Correlations for Petroleum Fractions”, Petroleum Refiner, August, 1959, p. 117. 5 Procedure 3A3.1, Chapter 3, API Technical Data Book, Fifth Edition (1987). 6 Procedure 3A3.2, Chapter 3, API Technical Data Book, Sixth Edition (1994). 7 Procedure 3A3.1, Chapter 3, API Technical Data Book, Sixth Edition (1994). Figure 4.72
- 318. Reactions 5-1 5-1 5 Reactions 5.1 Introduction................................................................................... 2 5.2 Reaction Component Selection....................................................... 3 5.2.1 Adding Components from Basis Manager ..................................... 4 5.2.2 Selections Within the Reaction Manager ......................................4 5.2.3 Library Reaction Components..................................................... 5 5.3 Reactions....................................................................................... 6 5.3.1 Manipulating Reactions ............................................................. 7 5.3.2 Conversion Reaction ................................................................. 8 5.3.3 Equilibrium Reaction ............................................................... 12 5.3.4 Kinetic Reaction ..................................................................... 19 5.3.5 Heterogeneous Catalytic Reaction............................................. 25 5.3.6 Simple Rate Reaction.............................................................. 32 5.4 Reaction Sets............................................................................... 35 5.4.1 Manipulating Reaction Sets...................................................... 36 5.4.2 Reaction Set Property View...................................................... 37 5.4.3 Exporting/Importing a Reaction Set .......................................... 43 5.4.4 Adding a Reaction Set to a Fluid Package................................... 44 5.4.5 Reactions in the Build Environment........................................... 44 5.5 Generalized Procedure................................................................. 45 5.6 Reactions - Example..................................................................... 47 5.6.1 Add Components to the Reaction Manager................................. 47 5.6.2 Create a Reaction................................................................... 47 5.6.3 Add the Reaction to a Reaction Set ........................................... 48 5.6.4 Attach the Reaction Set to a Fluid Package................................. 49
- 319. 5-2 Introduction 5-2 5.1 Introduction Reactions within HYSYS are defined inside the Reaction Manager. The Reaction Manager, which is located on the Reactions tab of the Simulation Basis Manager, provides a location from which you can define an unlimited number of reactions and attach combinations of these reactions in Reaction Sets. The Reaction Sets are then attached to Unit Operations in the Flowsheet. The Reaction Manager is a versatile, time-saving feature that allows you to do the following: • Create a new list of components for the Reactions or simply use the fluid package components. • Add, Edit, Copy, or Delete Reactions and Reaction Sets. • Attach Reactions to various Reaction Sets or attach Reaction Sets to multiple Fluid Packages, thus eliminating repetitive procedures. • Import and Export Reaction Sets. Figure 5.1
- 320. Reactions 5-3 5-3 5.2 Reaction Component Selection On the Reactions tab of the Simulation Basis Manager, there are three main groups which are described below: Each of the main groups within the Reaction Manager are examined in more detail. In this section, the Rxn Components group is described. The features in the Reactions group and Reaction Sets group are detailed in subsequent sections. There are three distinct ways in which components can be made accessible to Reactions in the Reaction Manager: • You can add components on the Component tab of the Simulation Basis Manager. The components are added to the component list and are available in the Rxn Components group to be attached to the Reaction Set. These components are also included in the fluid package depending on the component list selected for the package. • You can install components directly in the Reaction Manager without adding them to a specific component list by clicking the Add Comps button. The Component List property view appears and you can add reaction components for the reaction. These components appear automatically in the master component list, but not in the component list selected for the fluid package. When a Reaction Set (containing a Reaction which uses the new components) is attached to a fluid package, the components which are not present in the fluid package are automatically transferred. • You can select an Equilibrium Reaction from the Library tab of the Equilibrium Reactor property view. All components used in the reaction are automatically installed in the Reaction Manager. Once the Reaction Set Group Description Rxn Components Displays all components available to the Reaction Manager and the Add Comps button. Reactions Displays a list of the defined reactions and four buttons available to help define reactions. Reaction Sets Displays the defined reactions sets, the associated fluid packages and several buttons that help to define reaction sets and attach them to fluid packages. Refer to Chapter 1 - Components for more information on adding components. Refer to Section 5.4 - Reaction Sets for details on attaching a fluid package.
- 321. 5-4 Reaction Component Selection 5-4 (containing the Library reaction) is attached to a fluid package, the components are automatically transferred to the fluid package. 5.2.1 Adding Components from Basis Manager With this method of component selection, components are selected on the Components tab from the Simulation Basis Manager. Add a component list by clicking the Add button. From the Component List property view, select the components which are required for the reaction. This is similar to adding components to a component list for a particular fluid package or case. All components that are selected are displayed and available in the Rxn Components group of the Reaction Manager. 5.2.2 Selections Within the Reaction Manager Components can be made available prior to the creation of Reactions by directly selecting them within the Reaction Manager. By selecting the components within the Reaction Manager, you are not required to transfer component information from the fluid package. The components appear in the Master Component list, but not in the component list. Once a Reaction Set is attached to a fluid package, HYSYS automatically transfers all of the components contained within the Reaction(s) to the fluid package. The components listed in the Selected Reaction Components group are available to any Reaction that you create. Hypocomponents created using the Oil Manager can be used in Reactions. They are listed as Associated Components if they are installed in a fluid package. At least one fluid package must exist before components can be transferred from the Reaction Manager. Refer to Chapter 4 - HYSYS Oil Manager for details on hypocomponent.
- 322. Reactions 5-5 5-5 The following procedure demonstrates the steps required when beginning with a new case: 1. Create a new case by clicking the New Case icon on the toolbar. 2. On the Fluid Pkgs tab of the Simulation Basis Manager, click the Add button. A new fluid package is created and its property view opens. Close the Fluid Package property view. 3. Move to the Reactions tab. Click the Add Comps button in the Rxn Components group and the Component List property view is displayed. 4. Select either traditional or hypothetical components. The procedure for selecting components is similar to the selection of components for the fluid package. 5. Return to the Reaction Manager to create the Reaction(s) and install the Reaction(s) within a Reaction Set. 6. Attach the Reaction Set to the fluid package created in Step #2. 7. All components used in the Reaction(s) that are contained within the Reaction Set are now available in the fluid package. 5.2.3 Library Reaction Components When a Library Equilibrium Reaction is selected, all of its constituent components are automatically added to the Reaction Manager. You can then use the components in the Rxn Components group of the Reaction Manager to define other reactions. Library reactions can be installed prior to the addition of components to the case. You are not required to add components using the Component List property view or Reaction Manager. To add a Library reaction, do the following: 1. From the Reaction Manager, click the Add Rxn button in the Reactions group. 2. Highlight Equilibrium from the Reactions property view and click the Add Reaction button. New Case icon See Section 5.3 - Reactions, and Section 5.4 - Reaction Sets for details. See Section 5.4.4 - Adding a Reaction Set to a Fluid Package for details.
- 323. 5-6 Reactions 5-6 3. Move to the Library tab of the Equilibrium Reaction property view and select a reaction from the Library Equilibrium Rxns group. 4. Click the Add Library Rxn button. All library information concerning the reaction is transferred to the various tabs of the Equilibrium Reaction property view. The components used by the reaction are now shown in the Rxn Components group of the Reaction Manager. 5.3 Reactions In HYSYS, a default reaction set, the Global Rxn Set, is present in every simulation. All compatible reactions that are added to the case are automatically included in this set. A Reaction can be attached to a different set, but it also remains in the Global Rxn Set unless you remove it. To create a Reaction, click the Add Rxn button from the Reaction Manager. The following table describes the five types of Reactions that can be modeled in HYSYS: Figure 5.2 Reaction Type Requirements Conversion Requires the stoichiometry of all the reactions and the conversion of a base component in the reaction. Equilibrium Requires the stoichiometry of all the reactions. The term Ln(K) may be calculated using one of several different methods, as explained later. The reaction order for each component is determined from the stoichiometric coefficients. Refer to Section 5.4 - Reaction Sets for information on Reaction Sets.
- 324. Reactions 5-7 5-7 Each of the reaction types require that you supply the stoichiometry. To assist with this task, the Balance Error tracks the molecular weight and supplied stoichiometry. If the reaction equation is balanced, this error is equal to zero. If you have provided all of the stoichiometric coefficients except one, you may select the Balance button to have HYSYS determine the missing stoichiometric coefficient. Reactions can be on a phase specific basis. The Reaction is applied only to the components present in that phase. This allows different rate equations for the vapour and liquid phase in same reactor operation. 5.3.1 Manipulating Reactions From the Reaction Manager, you can use the four buttons in the Reactions group to manipulate reactions. The buttons are described below: Heterogeneous Catalytic Requires the kinetics terms of the Kinetic reaction as well as the Activation Energy, Frequency Factor, and Component Exponent terms of the Adsorption kinetics. Kinetic Requires the stoichiometry of all the reactions, as well as the Activation Energy and Frequency Factor in the Arrhenius equation for forward and reverse (optional) reactions. The forward and reverse orders of reaction for each component can be specified. Simple Rate Requires the stoichiometry of all the reactions, as well as the Activation Energy and Frequency Factor in the Arrhenius equation for the forward reaction. The Equilibrium Expression constants are required for the reverse reaction. Button Command View Rxn Accesses the property view of the highlighted reaction. Add Rxn Accesses the Reactions property view, from which you select a Reaction type. Delete Rxn Removes the highlighted reaction(s) from the Reaction Manager. Copy Rxn When selected, the Copy Reactions property view appears where you can select an alternate Reaction Type for the reaction or duplicate the highlighted reaction. Reaction Type Requirements
- 325. 5-8 Reactions 5-8 5.3.2 Conversion Reaction The Conversion Reaction requires the Stoichiometric Coefficients for each component and the specified Conversion of a base reactant. The compositions of unknown streams can be calculated when the Conversion is known. Consider the following Conversion reaction: where: a, b, c, d = the respective stoichiometric coefficients of the reactants (A and B) and products (C and D) A = the base reactant B = the base reactant not in a limiting quantity In general, the reaction components obey the following reaction stoichiometry: When you right-click a reaction in the Reactions group, you can select View or Delete from the object inspect menu. By default, conversion reactions are calculated simultaneously. However you can specify sequential reactions using the Ranking feature. (5.1) (5.2) Refer to Section 5.4 - Reaction Sets for more information. A b a -- -B c a -- -C d a -- -D + → + NA NAo 1 XA – ( ) = NB NBo b a -- -N Ao X A – = NC NCo c a -- - NAo XA ( ) + = ND NDo d a -- - NAo XA ( ) + =
- 326. Reactions 5-9 5-9 where: N* = the final moles of component * (*= A, B, C and D) N*o = the initial moles of component * XA = the conversion of the base component A The moles of a reactant available for conversion in a given reaction include any amount produced by other reactions, as well as the amount of that component in the inlet stream(s). An exception to this occurs when the reactions are specified as sequential. Stoichiometry Tab The Stoichiometry tab of a conversion reaction is shown in the figure below: When you have supplied all of the required information for the Conversion Reaction, the status bar (at the bottom right corner) will change from Not Ready to Ready. Figure 5.3
- 327. 5-10 Reactions 5-10 For each Conversion reaction, you must supply the following information: Basis Tab The Basis tab of a conversion reaction is shown in the figure below: Input Field Information Required Reaction Name A default name is provided which may be changed. The previous property view shows the name as Rxn-1. Components The components to be reacted. A minimum of two components are required. You must specify a minimum of one reactant and one product for each reaction you include. Use the drop-down list to access the available components. The Molecular Weight of each component is automatically displayed. Stoichiometric Coefficient Necessary for every component in the reaction. The Stoichiometric Coefficient is negative for a reactant and positive for a product. You may specify the coefficient for an inert component as 0, which, for the Conversion reaction, is the same as not including the component in the table. The Stoichiometric Coefficient does not have to be an integer; fractional coefficients are acceptable. The Reaction Heat value is calculated and displayed below the Balance Error. A positive value indicates that the reaction is endothermic. Figure 5.4
- 328. Reactions 5-11 5-11 On the Basis tab, you must supply the following information: Required Input Description Base Component Only a component that is consumed in the reaction (a reactant) may be specified as the Base Component (i.e., a reaction product or an inert component is not a valid choice). You can use the same component as the Base Component for a number of reactions, and it is quite acceptable for the Base Component of one reaction to be a product of another reaction. You have to add the components to the reaction before the Base Component can be specified. Rxn Phase The phase for which the specified conversions apply. Different kinetics for different phases can be modeled in the same reactor. Possible choices for the Reaction Phase are: • Overall. Reaction occurs in all Phases. • Vapour Phase. Reaction occurs only in the Vapour Phase. • Liquid Phase. Reaction occurs only in the Light Liquid Phase. • Aqueous Phase. Reaction occurs only in the Heavy Liquid Phase. • Combined Liquid. Reaction occurs in all Liquid Phases. Conversion Function Parameters Conversion percentage can be defined as a function of reaction temperature according to the following equation: This is the percentage of the Base Component consumed in this reaction. The value of Conv.(%) calculated from the equation is always limited within the range of 0.0 and 100%. The actual conversion of any reaction is limited to the lesser of the specified conversion of the base component or complete consumption of a limiting reactant. Reactions of equal ranking cannot exceed an overall conversion of 100%. Sequential Reactions may be modelled in one reactor by specifying the sequential order of solution. To define a constant value for conversion percentage, enter a conversion (%) value for Co only. Negative values for C1 and C2 means that the conversion drops with increased temperature and vice versa. Conv Co C1 T C2 T 2 ⋅ + ⋅ + = See Reaction Rank, in Section 5.4 - Reaction Sets.
- 329. 5-12 Reactions 5-12 5.3.3 Equilibrium Reaction The Equilibrium Reaction computes the conversion for any number of simultaneous or sequential reactions with the reaction equilibrium parameters and stoichiometric constants you provide. The Equilibrium constant can be expressed as follows: where: K = Equilibrium constant [BASE]ej = Basis for component j at equilibrium vj = Stoichiometric coefficient for the jth component Nc = Number of components The equilibrium constant ln(K) may be considered fixed, or calculated as a function of temperature based on a number of constants: where: Alternatively, you may supply tabular data (equilibrium constant versus temperature), and HYSYS automatically calculates the (5.3) This equation is only valid when BASE (i.e., concentration) is at equilibrium composition. (5.4) K BASE [ ]ej ( ) vj j 1 = Nc ∏ = Ln Keq ( ) a b + = a A B T -- - C T ( ) ln ⋅ D T ⋅ + + + = E T 2 F T 3 G T 4 H T ⋅ + ⋅ + ⋅ + ⋅ =
- 330. Reactions 5-13 5-13 equilibrium parameters for you. Ln(K) may also be determined from the Gibbs Free Energy. Stoichiometry Tab The Stoichiometry tab for a equilibrium reaction is shown in the figure below: For each reaction, you must supply the following information: When you have supplied all of the required information for the Equilibrium Reaction, the status bar (at the bottom right corner) changes from Not Ready to Ready. Figure 5.5 Input Required Description Reaction Name A default name is provided, which may be changed by simply selecting the field and entering a new name. Components A minimum of two components is necessary. You must specify a minimum of one reactant and one product for each reaction you include. The Molecular Weight of each component is automatically displayed. Stoichiometric Coefficient For every component in this reaction. The Stoichiometric Coefficient is negative for a reactant and positive for a product. You may specify the coefficient for an inert component as 0. The Stoichiometric Coefficient need not be an integer; fractional coefficients are acceptable.
- 331. 5-14 Reactions 5-14 Basis Tab The Basis tab for an equilibrium reaction contains two groups, the Basis and the Keq Source, which are shown in the figure below: The Basis group requires the following information: The Keq Source group contains four radio buttons and a checkbox. • By selecting the appropriate radio button, you can select one of four options as the Keq Source for the equilibrium reaction. • If the Auto Detect checkbox is selected, HYSYS automatically changes the Keq Source, depending on the Keq information you provide. For example, if you enter a fixed equilibrium constant, the Fixed Keq radio button is Figure 5.6 Input Required Description Basis From the drop-down list in the cell, select the Basis for the reaction. For example, select Partial Pressure or Activity as the basis. Reaction Phase The possible choices for the Reaction Phase, accessed from the drop-down list, are the Vapour and Liquid Phases. Minimum Temperature and Maximum Temperature Enter the minimum and maximum temperatures for which the reaction expressions are valid. If the temperature does not stay within the specified bounds, a warning message alerts you. Basis Units Enter the appropriate units for the Basis, or make a selection from the drop-down list.
- 332. Reactions 5-15 5-15 automatically selected. If you later add data to the Table tab, the Keq vs. T Table radio button is automatically selected. Keq Tab Depending on which option was selected in the Keq Source group (from the Basis tab), the Keq tab will display the appropriate information. The following table outlines each of the Keq source options and the respective information on the Keq tab. Option Description View on Keq Tab Ln(Keq) equation Ln(Keq), assumed to be a function of temperature only, is determined from the following equation: where: A, B, C, D, E, F, G, H = the constants defined on the Keq tab. Gibbs Free Energy The equilibrium constant is determined from the default HYSYS pure component Gibbs Free Energy (G) database and correlation. The correlation and database values are valid/ accurate for a temperature (T) range of 25°C to 426.85°C. If a wider range of G-T correlation is required, the user can clone the library component and input the components Gibbs Free Energy correlation to temperatures beyond the default temperature limit. Ln Keq ( ) a b + = a A B T -- - C T ( ) ln ⋅ D T ⋅ + + + = b E T 2 F T 3 G T 4 H T 5 ⋅ + ⋅ + ⋅ + ⋅ =
- 333. 5-16 Reactions 5-16 Approach Tab Under certain process conditions, an equilibrium reaction may not, actually reach equilibrium. The Equilibrium reaction set uses two types of approach, Fractional and Temperature, to simulate this type of situation. You may select either one or both types of approaches for use in the simulation. Fixed K In this case, the equilibrium constant Keq is considered to be fixed, and is thus independent of temperature. You may specify either Keq or Ln(Keq) on the Keq tab. Select the Log Basis checkbox to specify the equilibrium constant in the form Ln(Keq). K vs. T Table On the Keq tab, you can provide temperature and equilibrium constant data. HYSYS estimates the equilibrium constant from the pairs of data which you provide and interpolates when necessary. For each pair of data that you provide HYSYS calculates a constant in the Ln(K) equation. If you provide at least 4 pairs of data, all four constants A, B, C and D are estimated. The constants may be changed even after they are estimated from the pairs of data you provide, simply by entering a new value in the appropriate cell. If you later want to revert to the estimated value, simply delete the number in the appropriate cell, and it is recalculated. The term R2 gives an indication of the error or accuracy of the Ln(K) equation. It is equal to the regression sum of squares divided by the total sum of squares, and is equal to one when the equation fits the data perfectly. You can also provide the maximum (T Hi) and minimum (T Lo) temperatures applicable to the Ln(K) relation. The constants are always calculated based on the temperature range you provide. If you provide values in the K Table which are outside the temperature range, the calculation of the constants is not affected. Option Description View on Keq Tab
- 334. Reactions 5-17 5-17 The Approach tab contains two groups, the Fractional Approach and Temperature Approach. Both the Fractional Approach and Temperature Approach methods can be used to simulate an Equilibrium reaction that is a departure from equilibrium. For the Temperature Approach method, the HYSYS reaction solver will take into account the heat of reaction according to the equations listed. The direction of non-equilibrium departure depends on whether the reaction is endothermic or exothermic. The Fractional Approach method is an alternative to the Temperature Approach method and is defined according to the following equation: Equation (5.5) could be interpreted as defining the “actual” reaction extent of the equilibrium as only a percentage of the equilibrium reaction extent of the reaction. In the solver, the value of Approach % is limited between 0 and 100%. Figure 5.7 Temperature Approach is not relevant for a fixed Keq source and thus the group does not appear when Fixed Keq is selected from the Basis tab. (5.5) Feed Product – Approach% Feed Product – ( )equilibrium ⋅ =
- 335. 5-18 Reactions 5-18 Library Tab The Library tab allows you to add pre-defined reactions from the HYSYS Library. The components for the selected Library reaction are automatically transferred to the Rxn Components group of the Reaction Manager. When you select a reaction, all data for the reaction, including the stoichiometry, basis, and Ln(K) parameters, are transferred into the appropriate location on the Equilibrium Reaction property view. To access a library reaction, highlight it from the Library Equilibrium Rxns group and click the Add Library Rxn button. Figure 5.8 When K Table contains data input, the library reaction selection will be blocked. You must click the Erase Table button on the Keq tab and before you can add a library reaction.
- 336. Reactions 5-19 5-19 5.3.4 Kinetic Reaction To define a Kinetic Reaction, it is necessary to specify the forward Arrhenius Parameters (the reverse is optional), the stoichiometric coefficients for each component, and the forward (and reverse) reaction orders. An iterative calculation occurs, that requires the Solver to make initial estimates of the outlet compositions. With these estimates, the rate of reaction is determined. A mole balance is then performed as a check on the rate of reaction. If convergence is not attained, new estimates are made and the next iteration is executed. Equation (5.6) relates the rate of reaction rA with the reaction rate constants and the basis (e.g. - concentration). Equation (5.7) is a mole balance on the unit operation; for steady state solutions, the right side is equal to zero. (5.6) (5.7) When you have supplied all of the required information for the Kinetic Reaction, the status bar (at the bottom right corner) changes from Not Ready to Ready. rA k f BASIS ( ) k' f ' BASIS ( ) ⋅ – ⋅ = FAo FA – rA V d V ∫ + dNA dt --------- - =
- 337. 5-20 Reactions 5-20 Stoichiometry Tab When the Kinetic Reaction is selected, the following property view is displayed: For each reaction, you must supply the following information: Figure 5.9 Input Required Description Reaction Name A default name is provided, which may be changed at any time. Components You must specify a minimum of one reactant and one product for each reaction you include. Access the available components using the drop-down list. The Molecular Weight of each Component is automatically displayed.
- 338. Reactions 5-21 5-21 Thermodynamic Consistency Crucial to the specification of the reverse reaction equation is maintaining thermodynamic consistency so that the equilibrium rate expression retains the form of Equation (5.3). Failure to do so may produce erroneous results from HYSYS. Consider the previously mentioned reaction: with the forward kinetics following the relationship: Stoichiometric Coefficient Necessary for every component in the reaction. The Stoichiometric Coefficient is negative for a reactant and positive for a product. The Stoichiometric Coefficient need not be an integer; fractional coefficients are acceptable. You may specify the coefficient for an inert component as 0, which in most cases is the same as not including the component in the list. However, you must include components that have an overall stoichiometric coefficient of zero and a non-zero order of reaction (i.e., a component that might play the role of a catalyst). The Kinetic Reaction, which allows you to specify the Stoichiometric Coefficient and the order of reaction, makes it possible to correctly model this situation. Forward and Reverse Orders These are reaction orders. HYSYS initially fixes the orders of reaction according to the corresponding stoichiometric coefficient. These may be modified by directly entering the new value into the appropriate cell. For instance, in the following reaction: the kinetic rate law is When the stoichiometric coefficients are entered for the reaction, HYSYS sets the forward orders of reaction for CO and Cl2 at 1. Simply enter 1.5 into the Forward Order cell for Cl2 to correctly model the reaction order. (5.8) Input Required Description CO Cl2 + COCl2 → rCO k CO [ ] Cl2 [ ] 3 2 ⁄ = CO Cl2 COCl2 ↔ + rateforward kf CO [ ] Cl2 [ ] 3 2 ⁄ =
- 339. 5-22 Reactions 5-22 Now suppose you want to add the reverse kinetic reaction. Since the forward reaction is already known, the order of the reverse reaction has to be derived in order to maintain thermodynamic consistency. Suppose a generic kinetic relationship is chosen: where: = the unknown values of the order of the three components Equilibrium is defined as the moment when: The equilibrium constant K is then equal to: To maintain the form of the equilibrium equation seen in Equation (5.3), K is also equal to: Now combining the two relationships for K found in Equation (5.10) and Equation (5.11): To maintain thermodynamic consistency: must be 0, must be 0.5 and must be equal to 1. (5.9) (5.10) (5.11) (5.12) ratebackward kr CO [ ] α Cl2 [ ] β COCl2 [ ] γ = α β γ , , rateforward ratebackward – 0 = K kf kr --- - CO [ ] α Cl2 [ ] β COCl2 [ ] γ CO [ ] Cl2 [ ] 3 2 ⁄ ---------------------------------------------------------- = = K COCl2 [ ] CO [ ] Cl2 [ ] -------------------------- - = CO [ ] α Cl2 [ ] β COCl2 [ ] γ CO [ ] Cl2 [ ] 3 2 ⁄ ---------------------------------------------------------- COCl2 [ ] CO [ ] Cl2 [ ] -------------------------- - = α β γ
- 340. Reactions 5-23 5-23 Basis Tab The Basis tab for a kinetic reaction is shown below: On the Basis tab, the following parameters may be specified: Figure 5.10 Input Required Description Basis View the drop-down list in the cell to select the Basis for the reaction. If, for instance, the rate equation is a function of the partial pressures, select Partial Pressure as the Basis. Base Component Only a component that is consumed in the reaction (a reactant) may be specified as the Base Component (i.e., a reaction product or an inert component is not a valid choice). You can use the same component as the Base Component for a number of reactions, and it is quite acceptable for the Base Component of one reaction to be a product of another reaction. Reaction Phase The phase for which the kinetic rate equations apply. Different kinetic rate equations for different phases can be modeled in the same reactor. Possible choices for the Reaction Phase, available in the drop-down list, are: Overall, Vapour Phase, Liquid Phase, Aqueous Phase, and Combined Liquid. Minimum Temperature and Maximum Temperature Enter the minimum and maximum temperatures for which the forward and reverse reaction Arrhenius equations are valid. If the temperature does not remain within these bounds, a warning message alerts you during the simulation. Basis Units Enter the appropriate units for the Basis, or make a selection from the drop-down list. Rate Units Enter the appropriate units for the rate of reaction, or make a selection from the drop-down list.
- 341. 5-24 Reactions 5-24 Parameters Tab On the Parameters tab, you may specify the forward and reverse parameters for the Arrhenius equations. These parameters are used in the calculation of the forward and reverse reaction constants. The reaction rate constants are a function of temperature according to the following extended form of the Arrhenius equation: where: k = forward reaction rate constant k' = reverse reaction rate constant Figure 5.11 (5.13) (5.14) A, E, , are the Arrhenius Parameters for the forward reaction. A', E', and are the Arrhenius Parameters for the reverse reaction. Information for the reverse reaction is not required. k A E RT ( ) ----------- - – T β ⋅ exp ⋅ = k' A' E′ RT ------ - – T β′ ⋅ exp ⋅ = β β′
- 342. Reactions 5-25 5-25 A = forward reaction Frequency Factor A' = reverse reaction Frequency Factor E = forward reaction Activation Energy E' = reverse reaction Activation Energy = forward extended reaction rate constant = reverse extended reaction rate constant R = Ideal Gas Constant (value and units dependent on the units chosen for Molar Enthalpy and Temperature) T = Absolute Temperature 5.3.5 Heterogeneous Catalytic Reaction HYSYS provides a heterogeneous catalytic reaction kinetics model to describe the rate of catalytic reactions involving solid catalyst. The rate equation is expressed in the general form according to Yang and Hougen (1950): Since these types of reactions involve surface reaction together with adsorption (and desorption) of reactants and products, the resulting rate expression will be strongly mechanism dependent. Consider the following the simple reaction: If the Arrhenius coefficient, A is equal to zero, there is no reaction. If Arrhenius coefficients E and are zero, the rate constant is considered to be fixed at a value of A for all temperatures. (5.15) β β′ β r – kinetic term ( ) potential term ( ) adsorption term ( ) ----------------------------------------------------------------------- - = aA bB cP → +
- 343. 5-26 Reactions 5-26 Depending on the reaction mechanism, its reaction rate expression (ignoring reverse rate of reaction) could be: where: K* = the adsorption rate constant for component * k+ = the forward reaction rate constant k = reaction rate constant for oxidation of hydrocarbon k* = reaction rate constant for surface re-oxidation HYSYS has provided a general form, as follows, to allow user to build in the form of rate expression they want to use. where: kf and kr = the Rate Constants of the forward and reverse kinetic rate expressions K = the absorption rate constant M = number of absorbed reactants and products plus absorbed inert species Langmuir- Hinshelwood Model (5.16) Eley-Rideal Model (5.17) Mars-van Krevelen Model (5.18) (5.19) r k+KAKBCACB 1 KACA KBCB KPCP + + + ( ) 2 ------------------------------------------------------------------------ - = r k+KBCACB 1 KBCB KPCP + + ( ) ------------------------------------------------ - = r kCA 1 a b ⁄ ( ) k k∗ ⁄ ( )CACB n – + ---------------------------------------------------------------- - = r kf Ci αi i 1 = Reactants ∏ kr Cj βj j 1 = Products ∏ – 1 Kk Cg γ kg g 1 = M ∏ k 1 = M ∑ + n ------------------------------------------------------------------- =
- 344. Reactions 5-27 5-27 The rate constants kf, kr and Kk are all in Arrhenius form. You are required to prove the Arrhenius parameters (pre- exponential factor A and activation energy E) for each of these constants. You may have to group constants, for example in Equation (5.16), kf = k+ KAKB. You must take care in inputting the correct values of the Arrhenius equation. Also note that no default values are given for these constants. The Heterogeneous Catalytic Reaction option can be used in both CSTR and PFR reactor unit operations. A typical Reaction Set may include multiple instances of the Heterogeneous Catalytic Reaction. Stoichiometry Tab When the Heterogeneous Catalytic Reaction is selected, the following property view appears: Figure 5.12
- 345. 5-28 Reactions 5-28 For each catalytic reaction, you must supply the following information: Basis Tab The Basis tab for a catalytic reaction is shown below: Input Required Description Reaction Name A default name is provided, which may be changed. Components You must specify a minimum of one reactant and one product for each reaction you include. Open the drop- down list in the cell to access all of the available components. The Molecular Weight of each component is automatically displayed. Stoichiometric Coefficient Necessary for every component in this reaction. The Stoichiometric Coefficient is negative for a reactant and positive for a product. The Stoichiometric Coefficient need not be an integer; fractional coefficients are acceptable. You may specify the coefficient for an inert component as 0, which in this case is the same as not including the component in the list. Figure 5.13
- 346. Reactions 5-29 5-29 On the Basis tab, the following parameters may be specified: Input Required Description Basis Open the drop-down list in the cell to select the Basis for the reaction. For example, select Partial Pressure or Molar Concentration as the basis. Base Component Only a component that is consumed in the reaction (a reactant) may be specified as the Base Component (i.e., a reaction product or an inert component is not a valid choice). You can use the same component as the Base Component for a number of reactions, and it is acceptable for the Base Component of one reaction to be a product of another reaction. Reaction Phase The phase for which the kinetics apply. Different kinetics for different phases can be modeled in the same reactor. Possible choices for the Reaction Phase (available in the drop-down list) are Overall, Vapour Phase, Liquid Phase, Aqueous Phase, and Combined Liquid. Minimum Temperature and Maximum Temperature Enter the minimum and maximum temperatures for which the forward and reverse reaction Arrhenius equations are valid. If the temperature does not remain in these bounds, a warning message alerts you during the simulation. Basis Units Enter the appropriate units for the Basis, or make a selection from the drop-down list. Rate Units Enter the appropriate units for the rate of reaction, or make a selection from the drop-down list.
- 347. 5-30 Reactions 5-30 Numerator Tab The Numerator tab is specified in much the same way as you would specify a typical HYSYS Kinetic Reaction. The Numerator tab is shown below: You must supply the forward and reverse parameters of the extended Arrhenius equation. The forward and reverse reaction rate constants are calculated from these values. In addition to the rate constants, you must also specify the reaction order of the various components for both the forward and reverse reactions. This is done by selecting the Components field of the Reaction Order cell matrix, and selecting the appropriate component from the drop-down list and entering values for the Forward and/or Reverse orders. When specifying Forward and Reverse relationships it is important to maintain thermodynamic consistency. For more information on thermodynamic consistency see Section 5.3.4 - Kinetic Reaction, Thermodynamic Consistency. Figure 5.14 For more information on Kinetic reaction specifications see Section 5.3.4 - Kinetic Reaction.
- 348. Reactions 5-31 5-31 Denominator Tab The Denominator tab for a catalytic reaction is shown in the following figure: The Denominator tab contains the Component Exponents matrix in which each row represents a denominator term. The A and E columns are for the pre-exponential factor and the activation energy, respectively for the adsorption term (K). The remaining columns are used to specify the exponents ( ) of the absorbed components (Cg). In order to add a term to the denominator of the kinetic expression, you must activate the row of the matrix containing the <empty> message and add the relevant equation parameter values. The Delete Term button is provided to delete the selected row (or corresponding term) in the matrix. The overall exponent term n is specified in the Denominator Exponent field. Figure 5.15 (5.20) 1 Kk Cg γ kg g 1 = M ∏ k 1 = M ∑ + n γ kg
- 349. 5-32 Reactions 5-32 5.3.6 Simple Rate Reaction The Simple Rate Reaction is also similar to the Kinetic Reaction, except that the reverse reaction rate expression is derived from equilibrium data. Stoichiometry Tab When the Simple Rate Reaction is selected the following property view appears. For each reaction, supply the following information: When you have supplied all of the required information for the Simple Rate Reaction, the status bar (at the bottom right corner) will change from Not Ready to Ready. Figure 5.16 Field Description Reaction Name A default name is provided, which may be changed. Components You must specify a minimum of one reactant and one product for each reaction you include. Open the drop-down list in the cell to access all of the available components. The Molecular Weight of each component is automatically displayed. Stoichiometric Coefficient Necessary for every component in this reaction. The Stoichiometric Coefficient is negative for a reactant and positive for a product. The Stoichiometric Coefficient need not be an integer; fractional coefficients are acceptable. You may specify the coefficient for an inert component as 0, which in this case is the same as not including the component in the list.
- 350. Reactions 5-33 5-33 Basis Tab The Basis tab for the simple rate reaction is shown below: On the Basis tab, the following parameters may be specified: Figure 5.17 Parameter Description Basis Open the drop-down list in the cell to select the Basis for the reaction. For example, select Partial Pressure or Molar Concentration as the basis. Base Component Only a component that is consumed in the reaction (a reactant) may be specified as the Base Component (i.e., a reaction product or an inert component is not a valid choice). You can use the same component as the Base Component for a number of reactions, and it is acceptable for the Base Component of one reaction to be a product of another reaction. Reaction Phase The phase for which the kinetics apply. Different kinetics for different phases can be modeled in the same reactor. Possible choices for the Reaction Phase, available in the drop-down list, are Overall, Vapour Phase, Liquid Phase, Aqueous Phase and Combined Liquid. Minimum Temperature and Maximum Temperature Enter the minimum and maximum temperatures for which the forward and reverse reaction Arrhenius equations are valid. If the temperature does not remain in these bounds, a warning message alerts you during the simulation. Basis Units Enter the appropriate units for the Basis, or make a selection from the drop-down list. Rate Units Enter the appropriate units for the rate of reaction, or make a selection from the drop-down list.
- 351. 5-34 Reactions 5-34 Parameters Tab The Parameters tab for the rate reaction is shown below: The forward reaction rate constants are a function of temperature according to the following extended form of the Arrhenius equation: where: k = forward reaction rate constant A = forward reaction Frequency Factor E = forward reaction Activation Energy = forward extended reaction rate constant R = Ideal Gas Constant T = Absolute Temperature Figure 5.18 (5.21) If Arrhenius coefficient A is equal to zero, there is no reaction. If Arrhenius coefficients E and are equal to zero, the rate constant is considered to be fixed at a value of A for all temperatures. k A E RT ------ - – T β ⋅ exp ⋅ = β β
- 352. Reactions 5-35 5-35 The reverse equilibrium constant K' is considered to be a function of temperature only: where: A', B', C', D' = the reverse equilibrium constants You must supply at least one of the four reverse equilibrium constants. 5.4 Reaction Sets All Reaction Sets created within the Reaction Manager become available for attachment to your reactor operations in the flowsheet. Reaction Sets may contain more than one reaction. There is limited flexibility for the mixing of reaction types within a Reaction Set. You can have Equilibrium and Kinetic reactions within a single Reaction Set, but you must have a distinct Reaction Set for conversion reactions. HYSYS provides the Global Rxn Set, which contains all compatible reactions that you have defined in the case. If you only add Kinetic and Equilibrium reactions, or exclusively Conversion reactions to the case, all reactions are active within the Global Rxn Set. However, if you add an incompatible mix of reactions (i.e., Conversion and Kinetic), only the type of reactions that are compatible with the first installed reaction are active in the Global Rxn Set. The same reaction can be active in multiple reaction sets. A new set can be added from the Reaction Manager by selecting the Add Set button. (5.22) If only one type of reaction is used, all reactions are active in the Global Rxn Set, thereby eliminating the need to explicitly define a new Reaction Set. K′ ln A′ B′ T ------ - C′ T ( ) ln D′ T + + + =
- 353. 5-36 Reaction Sets 5-36 5.4.1 Manipulating Reaction Sets All Reaction Set manipulations are conducted in the Reaction Sets group of the Reactions tab of the Basis Manager. The following buttons are available in the Reaction Sets group to manipulate reaction sets: Button Description View Set Displays the property view for the highlighted reaction set. Add Set Adds a reaction set to the list of reaction sets and opens its property view. Delete Set Removes the highlighted reaction set(s) from the Reaction Manager. You must confirm your action to delete a reaction set. Copy Set Duplicates the highlighted reaction set(s). Import Set Opens a reaction set from disk into the current case. Export Set Saves a reaction set to disk for use in another case. Add to FP Accesses the Add 'Reaction Set Name' view, from which you attach the highlighted reaction set(s) to a fluid package. This button is available only when a Reaction Set is highlighted in the Reaction Sets group. When you right-click a Reaction Set in the Reaction Sets group, you can select View or Delete from the object inspect menu.
- 354. Reactions 5-37 5-37 5.4.2 Reaction Set Property View When you add a new set, or view an existing one, the Reaction Set property view appears as shown below. The following table describes the features contained within this property view. Figure 5.19 Feature Description Name A default Reaction Set name is provided, which can be changed. Set Type HYSYS determines the Set Type from the reaction types in the Active List. This field cannot be modified. The Reaction Set types are Conversion, Kinetic, Equilibrium, and Mixed. A Mixed Set Type corresponds to a Reaction Set containing both Kinetic and Equilibrium reactions.
- 355. 5-38 Reaction Sets 5-38 Solver Method The Solver method is available when dealing with Kinetic reaction sets. Several Solver Methods are available from the drop-down list and explained below: • Default. The Reaction Solver attempts to calculate the solution using Newton's Method. If this is not successful, it then uses the Rate Iterated and Rate Integrated Methods. For most cases, it is best to use the Default Solver Method. • Newton's Method. This method usually converges quickly by taking the derivative of the function using the current estimates, and uses these results to obtain new estimates. • Rate Iterated. This method is a partial Newton's method, and assumes that the off-diagonal elements of the Jacobian matrix are equal to zero. The Rate Iterated Method works well when there is very little interaction between reactions. • Rate Integrated. This method integrates the reaction equations until all time derivatives are zero. The Rate Integrated method is stable, but slow. • Auto Selected. Same as Default. Active List Reactions may be added to the Active List by positioning the cursor in the Active List column and selecting an existing Reaction from the drop-down list. You may also type the name of an existing reaction directly in the cell that shows <empty>. You can open the property view for any reaction in the Active List by highlighting it and clicking the View Active button. Alternatively, you may double-click on the reaction to view it. A reaction in the Active List may be transferred to the Inactive List simply by selecting the reaction and clicking the Make Inactive button. Inactive List Existing reactions may be added to the Inactive List by positioning the cursor in the Inactive List column and selecting a Reaction from the drop-down list. You can access the property view for any reaction in the Inactive List by highlighting it and clicking the View Inactive button. You may also double-click on the reaction to view it. A reaction in the Inactive List may be transferred to the Active List by selecting the reaction and clicking the Make Active button. If this reaction is not independent of other reactions in the Active List, an error message is displayed, and the reaction remains in the Inactive List. You cannot have two versions of the same reaction with different rate constants in the Active List. Operations Attached All operations to which the Reaction Set is attached are listed in this column. Feature Description
- 356. Reactions 5-39 5-39 Advanced Features By clicking the Advanced button, you can view the Advanced reaction options. Within the Volume Continuation Parameters group, the following options are available: Figure 5.20 Object Description Volume Continuation For most cases, it is not necessary to select this option. In situations where convergence is not easily attained (e.g., high reaction rates), select the Volume Continuation checkbox to enable HYSYS to more easily reach a solution. For Volume Continuation calculations, HYSYS “ramps” the volume starting from the initial volume fraction to the final volume fraction in the specified number of steps. For each successive step, the previous solution is used as the initial estimate for the next step. Initial Volume Fraction The default value is 1.0000e-06. This is the Volume Fraction at the start of the calculations. Number of Steps The default value is 10. If the solution does not converge, increase this value and re-run the simulation. Current Parm Value This field displays the current parameter value. Current Step Number This field displays the current step number.
- 357. 5-40 Reaction Sets 5-40 The parameters within the Initial Estimate Generation Parameters group are generally used with Reactions that have a high degree of interaction. You can also use these parameters to give some assistance in obtaining the final solution when the reactor operation fails to converge or when you have a large number of components and reactions. The parameters are described in the following table: The Reaction Solver Option group allows you to set the number of iterations and the tolerance level. The option depends on the boundary condition of the reactor operation which is using the reaction set. For example, when a reactor operation is used to determine the outlet temperature, the number of iterations and tolerance level are used in the reaction solver to search for a solution. Trace Level Provides a trace output of the calculations in the Trace Window. The trace level value corresponds to the level of detail that you see in the Trace Window. You are limited to the values 0, 1, 2, or 3. Prev Solution as Estimates It is necessary to make an initial estimate of the outlet compositions to obtain the proper solution. Select this checkbox if you want to use the previous solution as the initial estimate. This does not apply to the conversion reaction, since the specified conversion determines the outlet compositions. Use Iso and Adia Temp as Adia Est If you calculate a heat flow given a specific temperature, and then use this heat flow as a spec (deleting the temperature specification), HYSYS uses the previously calculated temperature as an estimate for the Adiabatic calculation. Parameter Description Damping Factor Default is 1.0, indicating that there is no damping. You can change this value. With a lower the damping factor, HYSYS uses smaller steps (slower and more stable) in converging towards the solution. Tolerance This is the tolerance set for the Estimate Generation. By default, this is set to 0.001. You are able to change this value. Maximum Iterations Maximum number of iterations HYSYS uses. There is no default value, and so you can set whatever value is desired. Object Description
- 358. Reactions 5-41 5-41 Reaction Rank The Ranking button is visible only when the Reaction Set type is Conversion. This option automatically handles most situations where reactions are sequential: allowing the three reactions to be modeled in a single reactor. In this case the Rank would be: However in situations where there are competing reactions: you can use the Ranking factor to specify which conversion value should be applied first. For example, if Rxn-4 was ranked first, the specified conversion for Rxn-5 would only be applied to the amount of component B remaining after Rxn-4 had run to its specified conversion. Option Description Max Numb of Iteration Controls the maximum number of iterations specified before the reaction solver stops searching for a solution. By default, the value is 200. Tolerance The specified tolerance level is the relative error between the energy balance equation and the calculated value by the reaction solver in the iteration. By default, the value is 0.00001. A B → Rxn 1 – B C → Rxn 2 – C D → Rxn 3 – A B 1 → B C 2 → C D 3 → A B + C → Rxn 4 – B D + E → Rxn 5 –
- 359. 5-42 Reaction Sets 5-42 To specify the Ranking, you must do so from the Reaction Ranks property view, which contains the following fields: Figure 5.21 HYSYS assigns default ranks to multiple conversion reactions by examining the reactants and products. For example, you may have a reaction set containing the following: 1.CH4+H2O CO+3H2 2.CH4+2H2O CO2+4H2 3.CH4+2O2 CO2+2H2O HYSYS notices that a product of Reaction 3, H2O, is used as a reactant in both Reactions 1 and 2. Since H2O may not be available until Reaction 3 has occurred, it is assigned a rank of 0 and the other reactions are each given the default Rank of 1. The feed composition is not taken into account, as Reaction Ranks are assigned prior to entering the Build Environment. Object Description Reaction This column shows all of the reactions to be ranked. Rank Shows the rank for each reaction, which is an integer value. The minimum value is 0 and the maximum is equal to the number of Reactions ranked. Thus, when ranking three sequential reactions, you may rank them 0-1-2 or 1-2-3; both methods give the same results. You may override the default values through the input of new values in the appropriate cells. You can set two or more reactions to have the same Rank; for instance, the ranks for Rxn-1 and Rxn-2 may be 1, and the rank for Rxn-3 may be 2. User Specified If you specify the Rank of the reaction, this checkbox is selected. → → →
- 360. Reactions 5-43 5-43 The buttons along the bottom of the Reaction Ranks property view have the following functions: 5.4.3 Exporting/Importing a Reaction Set After a Reaction Set is customized with reactions, it can be exported to a file. The same Reaction Set can then be used in another simulation case by importing the file and attaching it to a fluid package. Highlight a Reaction Set in the Reaction Sets group of the Reaction Manager and click the Export Set button. Select a file path (the default is usually satisfactory) and enter a filename with the extension *.rst. Click the Save button to export the reaction set to a file. The Import Set button allows you to introduce an exported Reaction Set into a simulation case. Choose the Reaction Set file (with the extension *.rst) from the list and select the Open button. If the file is not listed in the File Name field, an alternate File Path may be needed. Button Description Cancel Closes the property view without accepting any changes that were made. Reset Resets the Reaction Ranks to the internal default. Accept Closes the property view, accepting the changes that were made. Figure 5.22
- 361. 5-44 Reaction Sets 5-44 5.4.4 Adding a Reaction Set to a Fluid Package To make a Reaction Set available inside the flowsheet, you must attach it to the fluid package which is associated with the flowsheet. Highlight a reaction set in the Reaction Sets group of the Reaction Manager and click the Add to FP button. The Add 'Reaction Set Name' view appears, where you can highlight a fluid package and click the Add Set to Fluid Package button. 5.4.5 Reactions in the Build Environment When you are inside the Main or Column Environment you can access the Reaction Package property view without having to return to the fluid package. Under Flowsheet in the Main Menu, select Reaction Package. When a Reaction Set is attached to a unit operation, you can access the Reaction Set property view or the property view(s) for the associated Reaction(s) directly from the property view of the operation. Some of the unit operations that support reactions include the Reactor operation (conversion, equilibrium, or kinetic), the PFR, the Separator, and the Column. Figure 5.23 Refer to Section 5.3 - Reaction Package of the HYSYS User Guide for more details. Refer to the HYSYS Operation Guide for more information on the individual unit operations.
- 362. Reactions 5-45 5-45 5.5 Generalized Procedure The following procedure outlines the basic steps for creating a reaction, creating a reaction set, adding the reaction to the reaction set and then making the set available to the flowsheet. Refer to the Reaction Package property view, shown in Figure 5.1, as you follow the procedure: 1. Select Reaction Package under Flowsheet in the menu bar. 2. On the Reaction Package property view, click the Add Rxn button to create a new Reaction. 3. A Reactions property view appears, from which you must select the type of reaction to create. Select a reaction type and click the Add Reaction button. 4. The property view for the reaction type you selected is displayed. Complete the input for the reaction until Ready appears as the status message. You can close the Reaction property view, if desired. Figure 5.24
- 363. 5-46 Generalized Procedure 5-46 5. On the Reaction Package property view, click the New Set button to create a Reaction Set. The Reaction Set property view appears. 6. If desired, change the Name of the Reaction Set to better identify it. 7. To attach the newly created reaction to the Reaction Set, place the cursor in the <empty> cell of the Active List column. Open the drop-down list in the cell and select a reaction. The reaction becomes attached to the Reaction Set, as indicated by the selected checkbox in the OK column. 8. Click the Close button on the Reaction Set property view. 9. In the Available Reaction Sets group of the Reaction Package property view, highlight the name of the newly created Reaction Set. Notice that the attached reaction is listed in the Associated Reactions group. 10. Click the Add Set button to make the Reaction Set, and thus the Reaction, available to unit operations in the flowsheet. The new Reaction Set is displayed in the Current Reaction Sets group. Figure 5.25
- 364. Reactions 5-47 5-47 5.6 Reactions - Example The following procedure demonstrates the minimum steps required for: • The addition of components to the Reaction Manager. • The creation of a reaction. • The addition of the reaction to a reaction set. • The attachment of the reaction set to a fluid package. 5.6.1 Add Components to the Reaction Manager For this example, it is assumed that a New Case is created and a fluid package is installed. 1. Within the fluid package, the Peng Robinson property package is selected. 2. Within the component list, the following set of components are selected: H2O, CO, CO2, H2, O2, and CH4. 3. Go to the Reactions tab of the Simulation Basis Manager. The selected components are present in the Rxn Components group. 5.6.2 Create a Reaction 1. To install a reaction, click the Add Rxn button. 2. From the Reactions property view, highlight the Conversion reaction type and click the Add Reaction button. The Conversion Reaction property view appears. 3. On the Stoichiometry tab, select the first row of the Component column in the Stoichiometry Info table. 4. Select Methane from the drop-down list. The Mole Weight column automatically provides the molar weight of methane. 5. In the Stoich Coeff field, enter -3 (i.e., 3 moles of methane is consumed). Refer to Section 2.4 - HYSYS Fluid Package Property View for details on installing a fluid package. Refer to Section 5.3 - Reactions for information concerning reaction types and the addition of reactions.
- 365. 5-48 Reactions - Example 5-48 6. Now define the rest of the Stoichiometry tab as shown in the figure below and click the Balance button. 7. Go to the Basis tab and set Methane as the Base Component and Conversion to 60%. The status bar at the bottom of the property view now shows a Ready status. Close the property view. 5.6.3 Add the Reaction to a Reaction Set By default, the Global Rxn Set is present within the Reaction Sets group when you first display the Reaction Manager. However, for this procedure, a new Reaction Set is created: 1. Click the Add Set button. HYSYS provides the name Set-1 and opens the Reaction Set property view. 2. To attach the newly created Reaction to the Reaction Set, place the cursor in the <empty> cell under Active List. 3. Open the drop-down list and select the name of the Reaction (Rxn-1). The Set Type corresponds to the type of Reaction which you have added to the Reaction Set. Figure 5.26 Refer to Section 5.4 - Reaction Sets for details concerning Reactions Sets.
- 366. Reactions 5-49 5-49 The status is now Ready. 4. Close the property view to return to the Reaction Manager. 5.6.4 Attach the Reaction Set to a Fluid Package 1. To attach the reaction set to the fluid package, highlight Set- 1 in the Reaction Sets group and click the Add to FP button. When a Reaction Set is attached to a Fluid Package, it becomes available to unit operations within the Flowsheet using that particular Fluid Package. 2. The Add 'Set-1' property view appears, from which you highlight a fluid package and click the Add Set to Fluid Package button. Figure 5.27 Figure 5.28
- 367. 5-50 Reactions - Example 5-50 3. Close the property view. Notice that the name of the fluid package appears in the Assoc. Fluid Pkgs group when the Reaction Set is highlighted in the Reaction Sets group.
- 368. Component Maps 6-1 6-1 6 Component Maps 6.1 Introduction................................................................................... 2 6.2 Component Maps Tab..................................................................... 2 6.2.1 Component Mapping Group ....................................................... 3 6.2.2 Collections Group ..................................................................... 3 6.2.3 Maps for Collection Group.......................................................... 3 6.3 Component Map Property View ...................................................... 4
- 369. 6-2 Introduction 6-2 6.1 Introduction On the Component Maps tab of the Simulation Basis Manager, you can map fluid component composition across fluid package boundaries. Composition values for individual components from one fluid package can be mapped to a different component in an alternate fluid package. This is usually done when dealing with hypothetical oil components. Two previously defined fluid packages are required to perform a component mapping which is defined as a collection. One fluid package becomes the target component set and the other becomes the source component set. Mapping is performed using a matrix of source and target components. The transfer basis can be performed on a mole, mass, or liquid volume basis. 6.2 Component Maps Tab The Component Maps tab of the Simulation Basis Manager is shown below. Figure 6.1
- 370. Component Maps 6-3 6-3 6.2.1 Component Mapping Group The Component Mapping group defines the source and target fluid packages to be mapped. Once two distinct fluid packages are selected, the Create Collection button creates a collection in the Collections group. 6.2.2 Collections Group The Collections group lists all the component mapping collections currently available. You can change the collection name by selecting the name you want to edit and typing in the new name. 6.2.3 Maps for Collection Group The Maps for Collection group allows you to manage your Component Maps for each collection. The Collection drop-down list lets you select the collection maps that you want to add, edit, or delete. A default collection map is added to this list and cannot be deleted. To add a Component Map based on the currently selected collection, click the Add button. To view a Component Map, select it from the list and click the View button. Both the Add and View buttons open the Component Map Property view. To delete a Component Map, select the map from the list and click the Delete button.
- 371. 6-4 Component Map Property View 6-4 6.3 Component Map Property View Each time a Component Map is created or viewed via the Component Maps tab of the Simulation Basis Manager, the Component Map property view opens as shown below: The Component Map property view allows you to map the source components to the target components in the component matrix. Within the matrix, you can map all Specifiable (in red) component mapping values. The following table describes all of the options found in this property view. Figure 6.2 Object Description Name Displays the name of the component map. The name can be modified within the cell. View Options The View Options group provides you with three options in which to view the component matrix. • View All. Displays all of the source and target components in the matrix. • View Specifiable. Displays only the components that require values. • Transpose. Transposes the component matrix.
- 372. Component Maps 6-5 6-5 Component Transfer Options The Component Transfer Options group provides two options. • Unlock all Components. Unlocks all of the component values, allowing you to specify your own values. • Transfer Like Hypotheticals. Automatically maps like hypotheticals. • Transfer Hypos by NBP. Automatically maps hypos by NBP. This option is available when the Transfer Like Hypotheticals checkbox is selected. Transfer Basis The Transfer Basis group provides three options that allow you to define the composition mapping basis: • Mole • Mass • Liq Volume Multiple Specify Allows you to specify a value to one or more components at a time. Clone from another Map Allows you to import values into the mapping matrix from another map. Clear All Removes all of the user defined information from the matrix. Normalize Normalizes the mapping matrix. Object Description
- 373. 6-6 Component Map Property View 6-6
- 374. User Properties 7-1 7-1 7 User Properties 7.1 Introduction................................................................................... 2 7.2 User Property Tab.......................................................................... 3 7.2.1 Adding a User Property ............................................................. 4 7.3 User Property Property View.......................................................... 5 7.3.1 Data Tab .................................................................................5 7.3.2 Notes Tab................................................................................ 9
- 375. 7-2 Introduction 7-2 7.1 Introduction On the User Property tab of the Simulation Basis Manager, you can create an unlimited number of user properties for use in the Build Environment. A User Property is any property that can be defined and subsequently calculated on the basis of composition. When User properties are specified, they are used globally throughout the case. You can supply a User Property value for each component. User properties can be modified for a specific component, fluid package, or stream using the property editor. Specifying a User Property is similar to supplying a value at the component level in that it is globally available throughout the case, unless it is specified otherwise. It is the initial user property value for the component in the master component list. By selecting the mixing basis and mixing equation, the total User Property can be calculated. After a User Property is defined, HYSYS is able to calculate the value of the property for any flowsheet stream through the User Property utility. User Properties can also be set as Column specifications. Refer to Edit Properties from Section 1.2.3 - Manipulating the Selected Components List for more information on the property editor.
- 376. User Properties 7-3 7-3 7.2 User Property Tab The User Property tab of the Simulation Basis Manager is shown below: The available User Properties are listed in the User Properties group. The following User Property manipulation buttons are available: In the User Property Parameters group, all information pertaining to the highlighted property in the User Property group is displayed. You can edit the User Property parameters directly on the Simulation Basis property view or click on the View button for the User Property property view. Figure 7.1 Button Description View Edit the currently highlighted User Property. A User Property can also be added or viewed through the Oil Characterization - User Property tab. Add Create a new User Property. Delete Erase the currently highlighted User Property. HYSYS will not prompt for confirmation when deleting a User Property, so be careful when you are using this command. Refer to Section 7.3 - User Property Property View for descriptions of the User Property Parameters.
- 377. 7-4 User Property Tab 7-4 7.2.1 Adding a User Property To add a user property, follow the steps below: 1. On the User Property tab of the Simulation Basis Manager, click the Add button. The User Property property view appears. 2. Provide a descriptive Name for the user property on Simulation Basis property view. 3. In the User Property Parameters group, select a Mixing Basis using the drop-down list within the cell. 4. Select a Mixing Rule. 5. You can modify the two Mixing Parameters (F1 and F2) to more accurately reflect your property formula. 6. Select a Unit Type from the filtered drop-down list. 7. Input initial property values for each component.
- 378. User Properties 7-5 7-5 7.3 User Property Property View Each time a User Property is created through the User Property tab of the Simulation Basis Manager, the User Property property view is displayed. The User Property property view has two tabs, the Data tab and the Notes tab. All information regarding the calculation of the User Property is specified on the Data tab. 7.3.1 Data Tab On the Data tab, the Basic user prop definition, and the Initial user property value groups are displayed. Figure 7.2
- 379. 7-6 User Property Property View 7-6 Basic User Property Definition Group The following options are available for Process type properties: Parameter Description Mixing Basis You have the following options: Mole Fraction, Mass Fraction, Liquid Volume Fraction, Mole Flow, Mass Flow, and Liquid Volume Flow. All calculations are performed using compositions in HYSYS internal units. If you have specified a flow basis (molar, mass or liquid volume flow), HYSYS uses the composition as calculated in internal units for that basis. For example, a User Property with a Mixing Basis specified as molar flow is always calculated using compositions in kg mole/s, regardless of what the current default units are. Mixing Rule Select from one of three mixing rules: (7.1) (7.2) (7.3) where: Pmix = total user property value P(i) = input property value for component x(i) = component fraction or flow, depending on the chosen Mixing Basis Index = blended (total) index value f1 and f2 are specified constants Mixing Parameters The mixing parameters f1 and f2 are 1.00 by default. You may supply any value for these parameters. Unit Type This option allows you to select the variable type for the user property. For example, if you have a temperature user property, select temperature in the unit type using the drop-down list. Pmix ( ) f 1 f 2 x i ( )P i ( ) f 1 ( ) i 1 = N ∑ = Pmix ( ) f 1 f 2 x i ( ) P i ( ) ( ) f 1 ln ( ) i 1 = N ∑ = Index x i ( ) f 1 P i ( ) ⋅ 10 f 2 P i ( ) ⋅ + ( ) i 1 = N ∑ =
- 380. User Properties 7-7 7-7 Mixing Rules As listed previously, there are three mixing rules available when you are defining a user property. Equation (7.1) and Equation (7.2) are relatively straightforward. The index mixing rule, Equation (7.3), is slightly more complex. With the index mixing rule, HYSYS allows you to combine properties that are not inherently linear. A property is made linear through the use of the index equation. Equation (7.3) can be simplified into the following equations: You supply the individual component properties (Pi) and the index equation parameters (i.e., f1 and f2). Using Equation (7.4), HYSYS calculates an individual index value for each supplied property value. The sum of the index values, which is the blended index value, is then calculated using the Mixing Basis you have selected (Equation (7.5)). The blended index value is used in an iterative calculation to produce the blended property value (P in Equation (7.6)). The blended property value is the value which will be displayed in the user property utility. (7.4) (7.5) (7.6) The form of your index equation must resemble the HYSYS index equation such that you can supply the f1 and f2 parameters. Some common properties which can make use of the Index equation include R.O.N., Pour Point and Viscosity. Indexi f 1 P i ( ) ⋅ 10 f 2 P i ( ) ⋅ + = Index x i ( ) Indexi ⋅ i 1 = N ∑ = Index f1 P 10 f 2 P ⋅ + ⋅ =
- 381. 7-8 User Property Property View 7-8 Initial User Property Values for All Components Group The purpose of this property view is to instruct HYSYS how the User Property should be initialized throughout the case. Whenever the value of a User Property is requested by the User Property utility or by the column specification, HYSYS uses the composition in the specified basis, and calculate the User Property value using your mixing rule and parameters. The values for pure components are always used for the property and are not overwritten by the synthesis. The values for hypocomponents are only used if the synthesis of the property can not be achieved. For example, if there are insufficient number of data points. To specify a Property Value, click on the Edit component user property values button. Edit Component User Property Values This property view allows you to edit initial user property values for components in the master component list. Figure 7.3 User Property values can be assigned to hypocomponent during the characterization of an oil. Refer to Section 7.2.1 - Adding a User Property for more information. Refer to Chapter 14 - Utilities of the HYSYS Operations Guide for more information on the User Property utility. Refer to Chapter 2 - Column Operations of the HYSYS Operations Guide for information on the User Property specification.
- 382. User Properties 7-9 7-9 Once property values are entered or edited, click the Submit button which allows all values to be modified at one time. The changes are reflected on the User Property property view for each component. 7.3.2 Notes Tab HYSYS provides a tab where you can enter a description of the User Properties for your own future reference.
- 383. 7-10 User Property Property View 7-10
- 384. Property Methods & Calculations A-1 A-1 A Property Methods & Calculations A.1 Introduction .................................................................................. 3 A.2 Selecting Property Methods ........................................................... 4 A.3 Property Methods .......................................................................... 9 A.3.1 Equations of State.................................................................... 9 A.3.2 Activity Models ...................................................................... 18 A.3.3 Activity Model Vapour Phase Options......................................... 39 A.3.4 Semi-Empirical Methods.......................................................... 41 A.3.5 Vapour Pressure Property Packages .......................................... 42 A.3.6 Miscellaneous - Special Application Methods............................... 46 A.4 Enthalpy & Entropy Departure Calculations ................................. 50 A.4.1 Equations of State.................................................................. 50 A.4.2 Activity Models ...................................................................... 52 A.4.3 Lee-Kesler Option................................................................... 54 A.5 Physical & Transport Properties................................................... 57 A.5.1 Liquid Density........................................................................ 58 A.5.2 Vapour Density ...................................................................... 59 A.5.3 Viscosity ............................................................................... 59 A.5.4 Liquid Phase Mixing Rules for Viscosity...................................... 61 A.5.5 Thermal Conductivity.............................................................. 62 A.5.6 Surface Tension ..................................................................... 65 A.5.7 Heat Capacity........................................................................ 65 A.6 Volumetric Flow Rate Calculations............................................... 66 A.6.1 Available Flow Rates............................................................... 66 A.6.2 Liquid & Vapour Density Basis.................................................. 67 A.6.3 Formulation of Flow Rate Calculations ....................................... 69 A.6.4 Volumetric Flow Rates as Specifications..................................... 71
- 385. A-2 Property Methods & Calculations A-2 A.7 Flash Calculations.........................................................................72 A.7.1 T-P Flash Calculation ...............................................................73 A.7.2 Vapour Fraction Flash ..............................................................74 A.7.3 Enthalpy Flash........................................................................76 A.7.4 Entropy Flash .........................................................................76 A.7.5 Electrolyte Flash .....................................................................76 A.7.6 Handling of Water ...................................................................77 A.7.7 Supercritical Handling..............................................................79 A.7.8 Solids....................................................................................80 A.7.9 Stream Information.................................................................81 A.8 References ...................................................................................82
- 386. Property Methods & Calculations A-3 A-3 A.1 Introduction This appendix is organized such that the detailed calculations that occur within the Simulation Basis Manager and within the Flowsheet are explained in a logical manner. • In the first section, an overview of property method selection is presented. Various process systems and their recommended property methods are listed. • Detailed information is provided concerning each individual property method available in HYSYS. This section is further subdivided into equations of state, activity models, Chao-Seader based semi-empirical methods, vapour pressure models, and miscellaneous methods. • Following the detailed property method discussion is the section concerning enthalpy and entropy departure calculations. The enthalpy and entropy options available within HYSYS are largely dependent upon your choice of a property method. • The physical and transport properties are covered in detail. The methods used by HYSYS in calculating liquid density, vapour density, viscosity, thermal conductivity, and surface tension are listed. • HYSYS handles volume flow calculations in a unique way. To highlight the methods involved in calculating volumes, a separate section is provided. • The next section ties all of the previous information together. Within HYSYS, the Flash calculation uses the equations of the selected property method, as well as the physical and transport property functions to determine all property values for Flowsheet streams. After a flash calculation is performed on an object, all of its thermodynamic, physical and transport properties are defined. The flash calculation in HYSYS does not require initial guesses or the specification of flash type to assist in its convergence. • A list of References is included at the end of the Appendix.
- 387. A-4 Selecting Property Methods A-4 A.2 Selecting Property Methods The property packages available in HYSYS allow you to predict properties of mixtures ranging from well defined light hydrocarbon systems to complex oil mixtures and highly non- ideal (non-electrolyte) chemical systems. HYSYS provides enhanced equations of state (PR and PRSV) for rigorous treatment of hydrocarbon systems; semi-empirical and vapour pressure models for the heavier hydrocarbon systems; steam correlations for accurate steam property predictions; and activity coefficient models for chemical systems. All of these equations have their own inherent limitations and you are encouraged to become more familiar with the application of each equation. The following table lists some typical systems and recommended correlations. However, when in doubt of the accuracy or application of one of the property packages, contact Hyprotech to receive additional validation material or our best estimate of its accuracy. Type of System Recommended Property Method TEG Dehydration PR Sour Water Sour PR Cryogenic Gas Processing PR, PRSV Air Separation PR, PRSV Atm Crude Towers PR, PR Options, GS Vacuum Towers PR, PR Options, GS (<10 mm Hg), Braun K10, Esso K Ethylene Towers Lee Kesler Plocker High H2 Systems PR, ZJ or GS (see T/P limits) Reservoir Systems PR, PR Options Steam Systems Steam Package, CS or GS Hydrate Inhibition PR Chemical systems Activity Models, PRSV HF Alkylation PRSV, NRTL (Contact Hyprotech) TEG Dehydration with Aromatics PR (Contact Hyprotech)
- 388. Property Methods & Calculations A-5 A-5 For oil, gas and petrochemical applications, the Peng-Robinson EOS (PR) is generally the recommended property package. Hyprotech's enhancements to this equation of state enable it to be accurate for a variety of systems over a wide range of conditions. It rigorously solves any single, two-phase or three- phase system with a high degree of efficiency and reliability, and is applicable over a wide range of conditions, as shown in the following table. The PR equation of state is enhanced to yield accurate phase equilibrium calculations for systems ranging from low temperature cryogenic systems to high temperature, high pressure reservoir systems. The same equation of state satisfactorily predicts component distributions for heavy oil, aqueous glycol, and CH3OH systems. Our high recommendation for the PR equation of state is largely due to the preferential attention that is given to it by Hyprotech. Although the Soave-Redlich-Kwong (SRK) equation also provides comparable results to the PR in many cases, it is known that its range of application is significantly limited and it is not as reliable for non-ideal systems. For example, it should not be used for systems with CH3OH or glycols. Hydrocarbon systems where H2O solubility in HC is important Kabadi Danner Systems with select gases and light hydrocarbons MBWR Method Temp (°F) Temp (°C) Pressure (psia) Pressure (kPa) PR > -456 > -271 < 15,000 < 100,000 SRK > -225 > -143 < 5,000 < 35,000 The range of applicability in many cases is more indicative of the availability of good data rather than on the actual limitations. Type of System Recommended Property Method
- 389. A-6 Selecting Property Methods A-6 As an alternate, the PRSV equation of state should also be considered. It can handle the same systems as the PR equation with equivalent, or better accuracy, plus it is more suitable for handling moderately non-ideal systems. The advantage of the PRSV equation is that not only does it have the potential to more accurately predict the phase behaviour of hydrocarbon systems, particularly for systems composed of dissimilar components, but it can also be extended to handle non-ideal systems with accuracies that rival traditional activity coefficient models. The only compromise is increased computational time and the additional interaction parameter that is required for the equation. The PR and PRSV equations of state perform rigorous three- phase flash calculations for aqueous systems containing H2O, CH3OH or glycols, as well as systems containing other hydrocarbons or non-hydrocarbons in the second liquid phase. For SRK, H2O is the only component that initiates an aqueous phase. The Chao-Seader (CS) and Grayson-Streed (GS) packages can also be used for three-phase flashes, but are restricted to the use of pure H2O for the second liquid phase. The PR can also be used for crude systems, which have traditionally been modeled with dual model thermodynamic packages (an activity model representing the liquid phase behaviour, and an equation of state or the ideal gas law for the vapour phase properties). These earlier models are suspect for systems with large amounts of light ends or when approaching critical regions. Also, the dual model system leads to internal inconsistencies. The proprietary enhancements to the PR and SRK methods allow these EOSs to correctly represent vacuum conditions and heavy components (a problem with traditional EOS methods), as well as handle the light ends and high- pressure systems. Activity Models, which handle highly non-ideal systems, are much more empirical in nature when compared to the property predictions in the hydrocarbon industry. Polar or non-ideal chemical systems are traditionally handled using dual model approaches. In this type of approach, an equation of state is used for predicting the vapour fugacity coefficients and an
- 390. Property Methods & Calculations A-7 A-7 activity coefficient model is used for the liquid phase. Since the experimental data for activity model parameters are fitted for a specific range, these property methods cannot be used as reliably for generalized application. The CS and GS methods, though limited in scope, may be preferred in some instances. For example, they are recommended for problems containing mainly liquid or vapour H2O because they include special correlations that accurately represent the steam tables. The Chao Seader method can be used for light hydrocarbon mixtures, if desired. The Grayson- Streed correlation is recommended for use with systems having a high concentration of H2 because of the special treatment given H2 in the development of the model. This correlation may also be slightly more accurate in the simulation of vacuum towers. The Vapour Pressure K models, Antoine, BraunK10 and EssoK models, are designed to handle heavier hydrocarbon systems at lower pressures. These equations are traditionally applied for heavier hydrocarbon fractionation systems and consequently provide a good means of comparison against rigorous models. They should not be considered for VLE predictions for systems operating at high pressures or systems with significant quantities of light hydrocarbons. The Property Package methods in HYSYS are divided into basic categories, as shown in the following table. With each of the property methods listed are the available methods of VLE and Enthalpy/Entropy calculation. Property Method VLE Calculation Enthalpy/Entropy Calculation Equations of State PR PR PR PR LK ENTH PR Lee-Kesler SRK SRK SRK SRK LK ENTH SRK Lee-Kesler Kabadi Danner Kabadi Danner SRK Lee Kesler Plocker Lee Kesler Plocker Lee Kesler PRSV PRSV PRSV PRSV LK PRSV Lee-Kesler Please refer to Section A.4 - Enthalpy & Entropy Departure Calculations, for a description of Enthalpy and Entropy calculations.
- 391. A-8 Selecting Property Methods A-8 Sour PR PR & API-Sour PR SOUR SRK SRK & API-Sour SRK Zudkevitch-Joffee Zudkevitch-Joffee Lee-Kesler Activity Models Liquid Chien Null Chien Null Cavett Extended and General NRTL NRTL Cavett Margules Margules Cavett NRTL NRTL Cavett UNIQUAC UNIQUAC Cavett van Laar van Laar Cavett Wilson Wilson Cavett Vapour Ideal Gas Ideal Ideal Gas RK RK RK Virial Virial Virial Peng Robinson Peng Robinson Peng Robinson SRK SRK SRK Semi-Empirical Models Chao-Seader CS-RK Lee-Kesler Grayson-Streed GS-RK Lee-Kesler Vapour Pressure Models Mod Antoine Mod Antoine-Ideal Gas Lee-Kesler Braun K10 Braun K10-Ideal Gas Lee-Kesler Esso K Esso-Ideal Gas Lee-Kesler Miscellaneous - Special Application Methods Amines Mod Kent Eisenberg (L), PR (V) Curve Fit Steam Packages ASME Steam ASME Steam Tables ASME Steam Tables NBS Steam NBS/NRC Steam Tables NBS/NRC Steam Tables MBWR Modified BWR Modified BWR Property Method VLE Calculation Enthalpy/Entropy Calculation
- 392. Property Methods & Calculations A-9 A-9 A.3 Property Methods Details of each individual property method available in HYSYS are provided in this section, including equations of state, activity models, Chao-Seader based empirical methods, vapour pressure models, and miscellaneous methods. A.3.1 Equations of State HYSYS currently offers the enhanced Peng-Robinson14 (PR), and Soave-Redlich-Kwong19 (SRK) equations of state. In addition, HYSYS offers several methods which are modifications of these property packages, including PRSV, Zudkevitch Joffee (ZJ) and Kabadi Danner (KD). Lee Kesler Plocker12 (LKP) is an adaptation of the Lee Kesler equation for mixtures, which itself was modified from the BWR equation. Of these, the Peng-Robinson equation of state supports the widest range of operating conditions and the greatest variety of systems. The Peng-Robinson and Soave-Redlich-Kwong equations of state (EOS) generate all required equilibrium and thermodynamic properties directly. Although the forms of these EOS methods are common with other commercial simulators, they have been significantly enhanced by Hyprotech to extend their range of applicability. The Peng-Robinson property package options are PR, Sour PR, and PRSV. Soave-Redlich-Kwong equation of state options are the SRK, Sour SRK, KD and ZJ. The properties predicted by HYSYS' PR and SRK equations of state do not necessarily agree with those predicted by the PR and SRK of other commercial simulators.
- 393. A-10 Property Methods A-10 PR & SRK The PR and SRK packages contain enhanced binary interaction parameters for all library hydrocarbon-hydrocarbon pairs (a combination of fitted and generated interaction parameters), as well as for most hydrocarbon-nonhydrocarbon binaries. For non-library or hydrocarbon hypocomponent, HC-HC interaction parameters are generated automatically by HYSYS for improved VLE property predictions. The PR equation of state applies a functionality to some specific component-component interaction parameters. Key components receiving special treatment include He, H2, N2, CO2, H2S, H2O, CH3OH, EG, DEG, and TEG. For further information on application of equations of state for specific components, contact Hyprotech. The following page provides a comparison of the formulations used in HYSYS for the PR and SRK equations of state. The PR or SRK EOS should not be used for non-ideal chemicals such as alcohols, acids or other components. They are more accurately handled by the Activity Models (highly non-ideal) or the PRSV EOS (moderately non-ideal). Soave Redlich Kwong Peng Robinson where: b= bi= a= P RT V b – ----------- - a V V b + ( ) --------------------- – = Z 3 Z 2 – A B – B 2 – ( )Z AB – + 0 = P RT V b – ----------- - a V V b + ( ) b V b – ( ) + ------------------------------------------------ - – = Z 3 1 B – ( ) – Z 2 A 2B – 3B 2 – ( )Z AB B 2 – B 3 – ( ) – + 0 = xibi i 1 = N ∑ xibi i 1 = N ∑ 0.08664 RTci Pci ---------- - 0.077796 RTci Pci ---------- - xixj aiaj ( ) 0.5 1 kij – ( ) j 1 = N ∑ i 1 = N ∑ xixj aiaj ( ) 0.5 1 kij – ( ) j 1 = N ∑ i 1 = N ∑
- 394. Property Methods & Calculations A-11 A-11 Kabadi Danner This KD10 model is a modification of the original SRK equation of State, enhanced to improve the vapour-liquid-liquid equilibria calculations for H2O-hydrocarbon systems, particularly in the dilute regions. The model is an improvement over previous attempts which were limited in the region of validity. The modification is based on an asymmetric mixing rule, whereby the interaction in the water phase (with its strong H2 bonding) is calculated based on both the interaction between the hydrocarbons and the H2O, and on the perturbation by hydrocarbon on the H2O-H2O interaction (due to its structure). Lee Kesler Plöcker Equation The Lee Kesler Plöcker equation is an accurate general method for non-polar substances and mixtures. ai= aci= = mi= When an acentric factor > 0.49 is present HYSYS uses following corrected form: A= B= Soave Redlich Kwong Peng Robinson aciαi aciαi 0.42747 RTci ( ) 2 Pci ----------------- - 0.457235 RTci ( ) 2 Pci ------------------ αi 0.5 1 mi 1 Tri 0.5 – ( ) + 1 mi 1 Tri 0.5 – ( ) + 0.48 1.574ωi 0.176ωi 2 – + 0.37464 1.54226ωi 0.26992ωi 2 – + 0.379642 1.48503 0.164423 1.016666ωi – ( )ωi – ( )ωi + aP RT ( ) 2 -------------- aP RT ( ) 2 -------------- bP RT ------ - bP RT ------ -
- 395. A-12 Property Methods A-12 Plöcker et al.3 applied the Lee Kesler equation to mixtures, which itself was modified from the BWR equation. The compressibility factors are determined as follows: where: Mixing rules for pseudocritical properties are as follows: The Lee Kesler Plöcker equation does not use the COSTALD correlation in computing liquid density. This may result in differences when comparing results between equation of states. (A.1) (A.2) (A.3) (A.4) z z o ( ) ω ω r ( ) -------- z r ( ) z o ( ) – ( ) + = z pv RT ------ - prvr Tr --------- - z Tr vr Ak , , ( ) = = = z 1 B vr --- - C vr 2 ---- - D vr 5 ---- - C4 Tr 3 vr 2 ---------- - β γ vr 2 ---- - + γ – vr 2 ------ exp + + + + = vr pcv RTc -------- - = C c1 c2 Tr ---- - – c3 Tr 2 ----- + = ω o ( ) 0 = B b1 b2 Tr ---- - – b3 Tr 2 ----- – b4 Tr 3 ----- – = D d1 d2 Tr ---- - – = ω r ( ) 0.3978 = Tcm 1 Vcm η -------- - xixjvcij j ∑ i ∑ =
- 396. Property Methods & Calculations A-13 A-13 Peng-Robinson Stryjek-Vera The Peng-Robinson Stryjek-Vera (PRSV) equation of state is a two-fold modification of the PR equation of state that extends the application of the original PR method for moderately non- ideal systems. It is shown to match vapour pressures curves of pure components and mixtures more accurately than the PR method, especially at low vapour pressures. It is successfully extended to handle non-ideal systems giving results as good as those obtained using excess Gibbs energy functions like the Wilson, NRTL or UNIQUAC equations. One of the proposed modifications to the PR equation of state by Stryjek and Vera was an expanded alpha ( ) term that became a function of acentricity and an empirical parameter ( ) used for fitting pure component vapour pressures. (A.5) Tcij Tci Tcj ( ) 1 2 ⁄ = Tcii Tci = Tcjj Tcj = vcm xixjvcij j ∑ i ∑ = vcij 1 8 -- - vci 1 3 ⁄ vcj 1 3 ⁄ + ( ) 3 = vci zci RTci pci --------- - = zci 0.2905 0.085ωi – = pcm zcm RTcm vcm ----------- - = zcm 0.2905 0.085ωm – = ωm xiωi i ∑ = α κi αi 1 κi 1 Tr 0.5 – ( ) + [ ] 2 = κi κ0i κ + 1i 1 Tri 0.5 + ( ) 0.7 Tri 0.5 – ( ) = κ0i 0.378893 1.4897153ωi 0.17131848ωi 2 – 0.0196554ωi 3 + + =
- 397. A-14 Property Methods A-14 where: = characteristic pure component parameter = acentric factor The adjustable ( ) term allows for a much closer fit of the pure component vapour pressure curves. This term is regressed against the pure component vapour pressure for all components in HYSYS' library. For hypocomponent that are generated to represent oil fractions, HYSYS automatically regresses the term for each hypocomponent against the Lee-Kesler vapour pressure curves. For individual user-added hypothetical components, terms can either be entered or they are automatically regressed against the Lee-Kesler, Gomez-Thodos or Reidel correlations. The second modification consists of a new set of mixing rules for mixtures. Conventional mixing rules are used for the volume and energy parameters in mixtures, but the mixing rule for the cross term, aij, is modified to adopt a composition dependent form. Although two different mixing rules were proposed in the original paper, HYSYS has incorporated only the Margules expression for the cross term. where: Although only a limited number of binary pairs are regressed for this equation, our limited experience suggests that the PRSV can be used to model moderately non-ideal systems such as H2O-alcohol systems, some hydrocarbon-alcohol systems. You can also model hydrocarbon systems with improved accuracy. (A.6) If kij =kji, the mixing rules reduce to the standard PR equation of state. κ1i ωi κ1i κ1i κ1i aij aiiajj ( ) 0.5 1.0 xikij – xjkji – ( ) = kij kji ≠
- 398. Property Methods & Calculations A-15 A-15 Also, due to PRSV's better vapour pressure predictions, improved heat of vaporization predictions should be expected. Sour Water Options The Sour option is available for both the PR and SRK equations of state. The Sour PR option combines the PR equation of state and Wilson's API-Sour Model for handling sour water systems, while Sour SRK utilizes the SRK equation of state with the Wilson model. The Sour options use the appropriate equation of state for calculating the fugacities of the vapour and liquid hydrocarbon phases as well as the enthalpy for all three phases. The K-values for the aqueous phase are calculated using Wilson's API-Sour method. This option uses Wilson's model to account for the ionization of the H2S, CO2 and NH3 in the aqueous water phase. The aqueous model employs a modification of Van Krevelen's original model with many of the key limitations removed. More details of the model are available in the original API publication 955 titled "A New Correlation of NH3, CO2, and H2S Volatility Data from Aqueous Sour Water Systems". The original model is applicable for temperatures between 20°C (68°F) and 140°C (285°F), and pressures up to 50 psi. Use of either the PR or SRK equation of state to correct vapour phase non idealities extends this range, but due to lack of experimental data, exact ranges cannot be specified. The acceptable pressure ranges for HYSYS' model vary depending upon the concentration of the acid gases and H2O. The method performs well when the H2O partial pressure is below 100 psi. Different values can be entered for each of the binary interaction parameters. The flash calculation is much slower than the standard EOS, because the method performs an ion balance for each K- value calculation.
- 399. A-16 Property Methods A-16 This option may be applied to sour water strippers, hydrotreater loops, crude columns or any process containing hydrocarbons, acid gases and H2O. If the aqueous phase is not present, the method produces identical results to the EOS, (PR or SRK depending on which option you have chosen). Zudkevitch Joffee The Zudkevitch Joffee model is a modification of the Redlich Kwong equation of state. This model is enhanced for better prediction of vapour liquid equilibria for hydrocarbon systems, and systems containing H2. The major advantage of this model over the previous version of the RK equation is the improved capability of predicting pure component equilibria, and the simplification of the method for determining the required coefficients for the equation. Enthalpy calculations for this model are performed using the Lee Kesler model. EOS Enthalpy Calculation With any the Equation of State options except ZJ and LKP, you can specify whether the Enthalpy is calculated by either the Equation of State method or the Lee Kesler method. The ZJ and LKP must use the Lee Kesler method in Enthalpy calculations. Selection of an enthalpy method is done by selecting radio buttons in the Enthalpy Method group. Figure A.1 The Lee-Kesler enthalpies may be slightly more accurate for heavy hydrocarbon systems, but require more computer resources because a separate model must be solved.
- 400. Property Methods & Calculations A-17 A-17 Selecting the Lee Kesler Enthalpy option results in a combined property package employing the appropriate equation of state (either PR or SRK) for vapour-liquid equilibrium calculations and the Lee-Kesler equation for calculation of enthalpies and entropies. The LK method yields comparable results to HYSYS' standard equations of state and has identical ranges of applicability. As such, this option with PR has a slightly greater range of applicability than with SRK. Zero Kij Option HYSYS automatically generates hydrocarbon-hydrocarbon interaction parameters when values are unknown if the Estimate HC-HC/Set Non HC-HC to 0.0 radio button is selected. The Set All to 0.0 radio button turns off the automatic calculation of any estimated interaction coefficients between hydrocarbons. All binary interaction parameters that are obtained from the pure component library remain. The Set All to 0.0 option may prove useful when trying to match results from other commercial simulators which may not supply interaction parameters for higher molecular weight hydrocarbons. This option is set on the Binary Coeffs tab of the Fluid Package property view. Figure A.2 For information on the differences between EOS and LK methods, refer to the Section A.4 - Enthalpy & Entropy Departure Calculations.
- 401. A-18 Property Methods A-18 A.3.2 Activity Models Although equation of state models have proven to be reliable in predicting properties of most hydrocarbon based fluids over a large range of operating conditions, their application is limited to primarily non-polar or slightly polar components. Polar or non- ideal chemical systems are traditionally handled using dual model approaches. In this approach, an equation of state is used for predicting the vapour fugacity coefficients (normally ideal gas assumption or the Redlich Kwong, Peng-Robinson or SRK equations of state, although a Virial equation of state is available for specific applications) and an activity coefficient model is used for the liquid phase. Although there is considerable research being conducted to extend equation of state applications into the chemical arena (e.g., the PRSV equation), the state of the art of property predictions for chemical systems is still governed mainly by Activity Models. Activity Models are much more empirical in nature when compared to the property predictions (equations of state) typically used in the hydrocarbon industry. For example, they cannot be used as reliably as the equations of state for generalized application or extrapolating into untested operating conditions. Their tuning parameters should be fitted against a representative sample of experimental data and their application should be limited to moderate pressures. Consequently, more caution should be exercised when selecting these models for your simulation. Activity Models produce the best results when they are applied in the operating region for which the interaction parameters were regressed.
- 402. Property Methods & Calculations A-19 A-19 The phase separation or equilibrium ratio Ki for component i, defined in terms of the vapour phase fugacity coefficient and the liquid phase activity coefficient is calculated from the following expression: where: = liquid phase activity coefficient of component i fi° = standard state fugacity of component i P = system pressure = vapour phase fugacity coefficient of component i Although for ideal solutions the activity coefficient is unity, for most chemical (non-ideal) systems this approximation is incorrect. Dissimilar chemicals normally exhibit not only large deviations from an ideal solution, but the deviation is also found to be a strong function of the composition. To account for this non-ideality, activity models were developed to predict the activity coefficients of the components in the liquid phase. The derived correlations were based on the excess Gibbs energy function, which is defined as the observed Gibbs energy of a mixture in excess of what it would be if the solution behaved ideally, at the same temperature and pressure. For a multi-component mixture consisting of ni moles of component i, the total excess Gibbs free energy is represented by the following expression: where: = activity coefficient for component i (A.7) (A.8) Ki yi xi --- - = γ i fi° Pφi ----------- - = γ i φi G E RT ni γ i ln ( ) ∑ = γ i
- 403. A-20 Property Methods A-20 The individual activity coefficients for any system can be obtained from a derived expression for excess Gibbs energy function coupled with the Gibbs-Duhem equation. The early models (Margules, van Laar) provide an empirical representation of the excess function that limits their application. The newer models such as Wilson, NRTL and UNIQUAC utilize the local composition concept and provide an improvement in their general application and reliability. All of these models involve the concept of binary interaction parameters and require that they be fitted to experimental data. Since the Margules and van Laar models are less complex than the Wilson, NRTL and UNIQUAC models, they require less CPU time for solving flash calculations. However, these are older and more empirically based models and generally give poor results for strongly non-ideal mixtures such as alcohol-hydrocarbon systems, particularly for dilute regions. The Chien-Null model provides the ability to incorporate the different activity models within a consistent thermodynamic framework. Each binary can be represented by the model which best predicts its behaviour. The following table briefly summarizes recommended models for different applications (for a more detailed review, refer to the texts “The Properties of Gases & Liquids”17 and “Molecular Thermodynamics of Fluid Phase Equilibria” 16). A = Applicable; N/A = Not Applicable;? = Questionable; G = Good; LA = Limited Application Vapour phase non-ideality can be taken into account for each activity model by selecting the Redlich-Kwong, Peng-Robinson, or SRK equations of state as the vapour phase model. When one Application Margules van Laar Wilson NRTL UNIQUAC Binary Systems A A A A A Multicomponent Systems LA LA A A A Azeotropic Systems A A A A A Liquid-Liquid Equilibria A A N/A A A Dilute Systems ? ? A A A Self-Associating Systems ? ? A A A Polymers N/A N/A N/A N/A A Extrapolation ? ? G G G
- 404. Property Methods & Calculations A-21 A-21 of the equations of state is used for the vapour phase, the standard form of the Poynting correction factor is always used for liquid phase correction. If dimerization occurs in the vapour phase, the Virial equation of state should be selected as the vapour phase model. The binary parameters required for the activity models are regressed based on the VLE data collected from DECHEMA, Chemistry Data Series12 . There are over 16,000 fitted binary pairs in the HYSYS library. The structures of all library components applicable for the UNIFAC VLE estimation are also in the library. The Poynting correction for the liquid phase is ignored if ideal solution behaviour is assumed. If you are using the built-in binary parameters, the ideal gas model should be used. All activity models, with the exception of the Wilson equation, can automatically calculate three phases given the correct set of energy parameters. The vapour pressures used in the calculation of the standard state fugacity are based on the pure component coefficients in HYSYS' library using the modified form of the Antoine equation. When your selected components exhibit dimerization in the vapour phase, the Virial option should be selected as the vapour phase model. HYSYS contains fitted parameters for many carboxylic acids, and can estimate values from pure component properties if the necessary parameters are not available. All of the binary parameters in the HYSYS library are regressed using an ideal gas model for the vapour phase. HYSYS internally stored binary parameters are NOT regressed against three phase equilibrium data. Refer to Section A.3.3 - Activity Model Vapour Phase Options for a detailed description of the Virial option.
- 405. A-22 Property Methods A-22 General Remarks The dual model approach for solving chemical systems with activity models cannot be used with the same degree of flexibility and reliability that the equations of state can be used for hydrocarbon systems. However, some checks can be devised to ensure a good confidence level in property predictions: • Check the property package selected for applicability for the system considered and see how well it matches the pure component vapour pressures. Although the predicted pure component vapour pressures should normally be acceptable, the parameters are fitted over a large temperature range. Improved accuracies can be attained by regressing the parameters over the desired temperature range. • The automatic UNIFAC generation of energy parameters in HYSYS is a very useful tool and is available for all activity models. However, it must be used with caution. The standard fitted values in HYSYS likely produce a better fit for the binary system than the parameters generated by UNIFAC. As a general rule, use the UNIFAC generated parameters only as a last resort. • Always use experimental data to regress the energy parameters when possible. The energy parameters in HYSYS are regressed from experimental data, however, improved fits are still possible by fitting the parameters for the narrow operating ranges anticipated. The regressed parameters are based on data taken at atmospheric pressures. Exercise caution when extrapolating to higher or lower pressure (vacuum) applications. • Check the accuracy of the model for azeotropic systems. Additional fitting may be required to match the azeotrope with acceptable accuracy. Check not only for the temperature, but for the composition as well. • If three phase behaviour is suspected, additional fitting of the parameters may be required to reliably reproduce the VLLE equilibrium conditions. • An improvement in matching equilibrium data can be attained by including a temperature dependency of the energy parameters. However, depending on the validity or range of fit, this can lead to misleading results when extrapolating beyond the fitted temperature range. By default, HYSYS regresses ONLY the aij parameters while the bij parameters are set to zero, i.e., the aij term is assumed to be temperature independent. A temperature dependency can be incorporated by supplying a value for the bij term. The matrix
- 406. Property Methods & Calculations A-23 A-23 for the bij values are displayed by selecting the Bij radio button to switch matrices (note the zero or blank entries for all the binary pairs). When using the NRTL, General NRTL or Extended NRTL equations, more than two matrices are available. In general, the second matrix is the Bij matrix, and the third matrix is the parameter where . Any component pair with an aij value has an associated value. Immiscible This option is included for modeling the solubility of solutes in two coexisting liquid phases that are relatively immiscible with one another, such as a H2O-hydrocarbon system. In this system, the hydrocarbon components (solutes) are relatively insoluble in the water phase (solvent) whereas the solubility of the H2O in the hydrocarbon phase can become more significant. The limited mutual solubility behaviour can be taken into account when using any activity model with the exception of Wilson. This feature can be implemented for any single component pair by using the Immiscible radio button. Component i is insoluble with component j, based on the highlighted cell location. Alternatively, you can have all j components treated as insoluble with component i. HYSYS replaces the standard binary parameters with those regressed specifically for matching the solubilities of the solutes in both phases. The activities for the unknown binaries are generated at pre- selected compositions and the supplied UNIFAC reference temperature. The Wilson equation does not support LLE equilibrium. Both the aij and bij parameters are regressed with the immiscible option. αij αij αji = α
- 407. A-24 Property Methods A-24 These parameters were regressed from the mutual solubility data of n-C5, n-C6, n-C7, and n-C8 in H2O over a temperature range of 313 K to 473 K. The solubility of H2O in the hydrocarbon phase and the solubility of the hydrocarbons in the water phase are calculated based on the fitted binary parameters regressed from the solubility data referenced above. Chien-Null The Chien Null model provides a consistent framework for applying existing activity models on a binary by binary basis. In this manner, the Chien Null model allows you to select the best activity model for each pair in the case. The Chien Null model allows three sets of coefficients for each component pair, accessible through the A, B and C coefficient matrices. Please refer to the following sections for an explanation of the terms for each of the models. Chien Null Form The Chien-Null generalized multi-component equation can be expressed as follows: Each of the parameters in this equation are defined specifically for each of the applicable activity methods. (A.9) 2 Γ i L ln Aj i , xj j ∑ Rj i , xj j ∑ Sj i , xj j ∑ Vj i , xj j ∑ ---------------------------------------------------- xk Aj k , xj j ∑ Rj k , xj j ∑ Sj k , xj j ∑ Vj k , xj j ∑ --------------------------------------------------------- - ⋅ k ∑ + = Ai k , Aj k , xj j ∑ -------------------- - Ri k , Rj k , xj j ∑ -------------------- - Si k , Sj k , xj j ∑ -------------------- – Vi k , Vj k , xj j ∑ -------------------- - – +
- 408. Property Methods & Calculations A-25 A-25 Description of Terms The Regular Solution equation uses the following: is the solubility parameter in (cal/cm3 )½ and vi L is the saturated liquid volume in cm3 /mol calculated from: The van Laar, Margules and Scatchard Hamer use the following: For the van Laar, Margules and Scatchard Hamer equations: where: T = temperature unit must be in K (A.10) (A.11) Model Ai,j Ri,j Si,j Vi,j van Laar Margules Scatchard Hamer (A.12) Ai j , vi L δi δj – ( ) 2 RT -------------------------- - = Ri j , Ai j , Aj i , --------- - = Vi j , Ri j , = Si j , Ri j , = δi vi L vω i , 5.7 3Tr i , + ( ) = γ i j , ∞ ln Ai j , Aj i , --------- - Ri j , Ri j , 2 γ i j , ∞ ln 1 γ i j , ∞ ln γ j i , ∞ ln ----------------- - + -------------------------------- - Ai j , Aj i , --------- - 1 1 2 γ i j , ∞ ln 1 γ i j , ∞ ln γ j i , ∞ ln ----------------- - + -------------------------------- - Ai j , Aj i , --------- - vi ∞ vj ∞ ---- - vi ∞ vj ∞ ---- - γ i j , ∞ ln ai j , bi j , T -------- - cijT + + =
- 409. A-26 Property Methods A-26 The NRTL form for the Chien Null uses: The expression for the term under the Chien Null incorporates the R term of HYSYS' NRTL into the values for aij and bij. As such, the values initialized for NRTL under Chien Null are not the same as for the regular NRTL. When you select NRTL for a binary pair, aij is empty (essentially equivalent to the regular NRTL bij term), bij is initialized and cij is the term for the original NRTL, and is assumed to be symmetric. The General Chien Null equation is: In all cases: With the exception of the Regular Solution option, all models can utilize six constants, ai,j, aj,i, bi,j, bj,i, ci,j and cj,i for each component pair. For all models, if the constants are unknown they can be estimated internally from the UNIFAC VLE or LLE methods, the Insoluble option, or using Henry's Law coefficients for appropriate components. For the general Chien Null model, the cij's are assumed to be 1. The Equation (A.12) is of a different form than the original van Laar and Margules equations in HYSYS, which uses an a + bT relationship. However, since HYSYS only contains aij values, the difference should not cause problems. If you have regressed parameters using HYPROP for any of the Activity Models supported under the Chien Null, they are not read in. (A.13) i j , 2τ i j , Vi j , = Ri j , 1 = Vi j , ci j , – τ i j , ( ) exp = Si j , 1 = τ i j , ai j , bi j , T K ( ) ----------- - + = (A.14) (A.15) τ α Ai j , ai j , bi j , T K ( ) ----------- - + = Ri j , Ai j , Aj i , --------- - = Vi j , Ci j , = Si j , Ci j , = Ai i , 0 = Ri i , Si i , Vi i , 1 = = =
- 410. Property Methods & Calculations A-27 A-27 Extended & General NRTL The Extended and General NRTL models are variations of the NRTL model. More binary interaction parameters are used in defining the component activity coefficients. You may apply either model to systems: • with a wide boiling point range between components. • where you require simultaneous solution of VLE and LLE, and there exists a wide boiling point range or concentration range between components. You can specify the format for the Equations of and to be any of the following: Options where: T = temperature in K t = temperature in °C τ ij αij τ ij Aij Bij T ------ Cij T 2 ------ - FijT Gij T ( ) ln + + + + = αij Alp1ij Alp2ijT + = τ ij Aij Bij T ------ + RT ------------------- - = αij Alp1ij = τ ij Aij Bij T ------ FijT Gij T ( ) ln + + + = αij Alp1ij Alp2ijT + = τ ij Aij Bijt Cij T ------ - + + = αij Alp1ij Alp2ijT + = τ ij Aij Bij T ------ + = αij Alp1ij =
- 411. A-28 Property Methods A-28 Depending on which form of the equations that you have selected, you are able to specify values for the different component energy parameters. The General NRTL model provides radio buttons on the Binary Coeffs tab which access the matrices for the Aij, Bij, Cij, Fij, Gij, Alp1ij and Alp2ij energy parameters. The Extended NRTL model allows you to input values for the Aij, Bij, Cij, Alp1ij and Alp2ij energy parameters by selecting the appropriate radio button. You do not have a choice of equation format for and . The following is used: where: T = temperature in K t = temperature in °C Margules The Margules equation was the first Gibbs excess energy representation developed. The equation does not have any theoretical basis, but is useful for quick estimates and data interpolation. HYSYS has an extended multicomponent Margules equation with up to four adjustable parameters per binary. The four adjustable parameters for the Margules equation in HYSYS are the aij and aji (temperature independent) and the bij and bji terms (temperature dependent). The equation uses The equations options can be viewed in the Display Form drop-down list on the Binary Coeffs tab of the Fluid Package property view. (A.16) The equation should not be used for extrapolation beyond the range over which the energy parameters are fitted. τ ij αij τ ij Aij Bijt Cij T ------ - + + = αij Alp1ij Alp2ij + =
- 412. Property Methods & Calculations A-29 A-29 parameter values stored in HYSYS or any user supplied value for further fitting the equation to a given set of data. The Margules activity coefficient model is represented by the following equation: where: = activity coefficient of component i xi = mole fraction of component i Ai = Bi = T = temperature (K) n = total number of components aij = non-temperature dependent energy parameter between components i and j bij = temperature dependent energy parameter between components i and j [1/K] aji = non-temperature dependent energy parameter between components j and i bji = temperature dependent energy parameter between components j and i [1/K] NRTL The NRTL (Non-Random-Two-Liquid) equation, proposed by Renon and Prausnitz in 1968, is an extension of the original Wilson equation. It uses statistical mechanics and the liquid cell theory to represent the liquid structure. These concepts, combined with Wilson's local composition model, produce an (A.17) γ i ln 1.0 xi – [ ] 2 Ai 2xi Bi Ai – ( ) + [ ] = γ i xj aij bijT + ( ) 1.0 xi – ( ) -------------------------- - j 1 = n ∑ xj aji bjiT + ( ) 1.0 xi – ( ) -------------------------- - j 1 = n ∑
- 413. A-30 Property Methods A-30 equation capable of representing VLE, LLE and VLLE phase behaviour. Like the Wilson equation, the NRTL is thermodynamically consistent and can be applied to ternary and higher order systems using parameters regressed from binary equilibrium data. It has an accuracy comparable to the Wilson equation for VLE systems. The NRTL equation in HYSYS contains five adjustable parameters (temperature dependent and independent) for fitting per binary pair. The NRTL combines the advantages of the Wilson and van Laar equations. • Like the van Laar equation, NRTL is not extremely CPU intensive and can represent LLE quite well. • Unlike the van Laar equation, NRTL can be used for dilute systems and hydrocarbon-alcohol mixtures, although it may not be as good for alcohol-hydrocarbon systems as the Wilson equation. The NRTL equation in HYSYS has the following form: where: = activity coefficient of component i Gij = = xi = mole fraction of component i T = temperature (K) Due to the mathematical structure of the NRTL equation, it can produce erroneous multiple miscibility gaps. (A.18) γ i ln τ jixjGji j 1 = n ∑ xkGki k 1 = n ∑ ---------------------------- - xjGij xkGkj k 1 = n ∑ ----------------------- - τ ij τ mjxmGmj m 1 = n ∑ xkGkj k 1 = n ∑ ------------------------------------ - – j 1 = n ∑ + = γ i τ ijαij – [ ] exp τ ij aij bijT + RT --------------------- -
- 414. Property Methods & Calculations A-31 A-31 n = total number of components aij = non-temperature dependent energy parameter between components i and j (cal/gmol) bij = temperature dependent energy parameter between components i and j (cal/gmol-K) = NRTL non-randomness constant for binary interaction note that for all binaries The five adjustable parameters for the NRTL equation in HYSYS are the aij, aji, bij, bji, and terms. The equation uses parameter values stored in HYSYS or any user supplied value for further fitting the equation to a given set of data. UNIQUAC The UNIQUAC (UNIversal QUAsi Chemical) equation proposed by Abrams and Prausnitz in 1975 uses statistical mechanics and the quasi-chemical theory of Guggenheim to represent the liquid structure. The equation is capable of representing LLE, VLE and VLLE with accuracy comparable to the NRTL equation, but without the need for a non-randomness factor. The UNIQUAC equation is significantly more detailed and sophisticated than any of the other activity models. Its main advantage is that a good representation of both VLE and LLE can be obtained for a large range of non-electrolyte mixtures using only two adjustable parameters per binary. The fitted parameters usually exhibit a smaller temperature dependence which makes them more valid for extrapolation purposes. The UNIQUAC equation utilizes the concept of local composition as proposed by Wilson. Since the primary concentration variable is a surface fraction as opposed to a mole fraction, it is applicable to systems containing molecules of very different sizes and shape, such as polymer solutions. The UNIQUAC equation can be applied to a wide range of mixtures containing H2O, alcohols, nitriles, amines, esters, ketones, aldehydes, halogenated hydrocarbons and hydrocarbons. HYSYS contains the following four-parameter extended form of the UNIQUAC equation. The four adjustable parameters for the αij αij αji = αij
- 415. A-32 Property Methods A-32 UNIQUAC equation in HYSYS are the aij and aji terms (temperature independent), and the bij and bji terms (temperature dependent). The equation uses parameter values stored in HYSYS or any user supplied value for further fitting the equation to a given set of data. where: = activity coefficient of component i xi = mole fraction of component i T = temperature (K) n = total number of components Lj = 0.5Z(rj-qj)-rj+1 = = = Z = 10.0 co-ordination number aij = non-temperature dependent energy parameter between components i and j (cal/gmol) bij = temperature dependent energy parameter between components i and j (cal/gmol-K) qi = van der Waals area parameter - Awi /(2.5e9) (A.19) γ i ln Φi xi ---- - ln 0.5Zqi θi Φi ---- - Li Φi xi ---- - Ljxj qi 1.0 θjτ ji j 1 = n ∑ ln – qi θjτ ij θkτ kj k 1 = n ∑ ----------------------- - j 1 = n ∑ – + j 1 = n ∑ – + ln + = γ i θi qixi qjxj j ∑ ------------ - τ ij aij bijT + RT --------------------- - – exp Φi rixi rjxj j ∑ ----------- -
- 416. Property Methods & Calculations A-33 A-33 Aw = van der Waals area ri = van der Waals volume parameter - Vwi /(15.17) Vw = van der Waals volume Van Laar The van Laar equation was the first Gibbs excess energy representation with physical significance. The van Laar equation in HYSYS is a modified form of that described in “Phase Equilibrium in Process Design” by H.R. Null. This equation fits many systems quite well, particularly for LLE component distributions. It can be used for systems that exhibit positive or negative deviations from Raoult's Law, however, it cannot predict maxima or minima in the activity coefficient. Therefore, it generally performs poorly for systems with halogenated hydrocarbons and alcohols. Due to the empirical nature of the equation, caution should be exercised in analyzing multi- component systems. It also has a tendency to predict two liquid phases when they do not exist. The van Laar equation has some advantages over the other activity models in that it requires less CPU time and can represent limited miscibility as well as three phase equilibrium. HYSYS uses the following extended, multi-component form of the van Laar equation. where: = activity coefficient of component i xi = mole fraction of component i The van Laar equation also performs poorly for dilute systems and cannot represent many common systems, such as alcohol-hydrocarbon mixtures, with acceptable accuracy. (A.20) γ i ln Ai 1.0 zi – [ ] 2 1.0 Eizi + ( ) = γ i
- 417. A-34 Property Methods A-34 Ai = Bi = Ei = -4.0 if Ai and Bi < 0.0, otherwise 0.0 zi = T = temperature (K) n = total number of components aij = non-temperature dependent energy parameter between components i and j bij = temperature dependent energy parameter between components i and j [1/K] aji = non-temperature dependent energy parameter between components j and i bji = temperature dependent energy parameter between components j and i [1/K] The four adjustable parameters for the van Laar equation in HYSYS are the aij, aji, bij, and bji terms. The equation will use parameter values stored in HYSYS or any user supplied value for further fitting the equation to a given set of data. Wilson The Wilson equation, proposed by Grant M. Wilson in 1964, was the first activity coefficient equation that used the local composition model to derive the Gibbs Excess energy expression. It offers a thermodynamically consistent approach to predicting multi-component behaviour from regressed binary equilibrium data. Our experience also shows that the Wilson equation can be extrapolated with reasonable confidence to other operating regions with the same set of regressed energy parameters. xj aij bijT + ( ) 1.0 xi – ( ) -------------------------- - j 1 = n ∑ xj aji bjiT + ( ) 1.0 xi – ( ) -------------------------- - j 1 = n ∑ Aixi Aixi Bi 1.0 xi – ( ) + [ ] ------------------------------------------------ -
- 418. Property Methods & Calculations A-35 A-35 Although the Wilson equation is more complex and requires more CPU time than either the van Laar or Margules equations, it can represent almost all non-ideal liquid solutions satisfactorily except electrolytes and solutions exhibiting limited miscibility (LLE or VLLE). It performs an excellent job of predicting ternary equilibrium using parameters regressed from binary data only. The Wilson equation gives similar results as the Margules and van Laar equations for weak non-ideal systems, but consistently outperforms them for increasingly non-ideal systems. The Wilson equation in HYSYS requires two to four adjustable parameters per binary. The four adjustable parameters for the Wilson equation in HYSYS are the aij and aji (temperature independent) terms, and the bij and bji terms (temperature dependent). Depending upon the available information, the temperature dependent parameters may be set to zero. Although the Wilson equation contains terms for temperature dependency, caution should be exercised when extrapolating. The Wilson activity model in HYSYS has the following form: The Wilson equation cannot be used for problems involving liquid-liquid equilibrium. Setting all four parameters to zero does not reduce the binary to an ideal solution, but maintains a small effect due to molecular size differences represented by the ratio of molar volumes. (A.21) γ i ln 1.0 xjAij xkAki xjAkj j 1 = n ∑ --------------------- - k 1 = n ∑ – j 1 = n ∑ ln – =
- 419. A-36 Property Methods A-36 where: = activity coefficient of component i Aij = xi = mole fraction of component i T = temperature (K) n = total number of components aij = non-temperature dependent energy parameter between components i and j (cal/gmol) bij = temperature dependent energy parameter between components i and j (cal/gmol-K) Vi = molar volume of pure liquid component i in m3/kgmol (litres/gmol) The equation uses parameter values stored in HYSYS or any user supplied value for further fitting the equation to a given set of data. Henry’s Law Henry's Law cannot be selected explicitly as a property method in HYSYS. However, HYSYS uses Henry's Law when an activity model is selected and "non-condensable" components are included within the component list. HYSYS considers the following components "non-condensable": Component Simulation Name CH4 Methane C2H6 Ethane C2H4 Ethylene C2H2 Acetylene H2 Hydrogen He Helium Ar Argon N2 Nitrogen O2 Oxygen γ i Vj Vi ---- - aij bijT + ( ) RT -------------------------- - – exp
- 420. Property Methods & Calculations A-37 A-37 The extended Henry's Law equation in HYSYS is used to model dilute solute/solvent interactions. "Non-condensable" components are defined as those components that have critical temperatures below the temperature of the system you are modeling. The equation has the following form: where: i = solute or "non-condensable" component j = solvent or condensable component Hij = Henry's coefficient between i and j in kPa A = A coefficient entered as aij in the parameter matrix B = B coefficient entered as aji in the parameter matrix C = C coefficient entered as bij in the parameter matrix D = D coefficient entered as bji in the parameter matrix T = temperature in degrees K An example of the use of Henry's Law coefficients is illustrated below. The NRTL activity model is selected as the property method. There are three components in the Fluid Package, one of which, ethane, is a "non-condensable" component. On the Binary Coeffs tab of the Fluid Package property view, you can view the Henry's Law coefficients for the interaction of ethane and the other components. By selecting the Aij radio button, you can view/edit the A and B coefficients. Select the Bij radio button to enter or view the C and D coefficients in the Henry's Law equation. NO NO H2S H2S CO2 CO2 CO CO (A.22) Component Simulation Name Hij ln A B T -- - C T ( ) DT + ln + + =
- 421. A-38 Property Methods A-38 If HYSYS does not contain pre-fitted Henry's Law coefficients and Henry's Law data is not available, HYSYS estimates the missing coefficients. To estimate a coefficient (A or B in this case), select the Aij radio button, highlight a binary pair and press the Individual Pair button. The coefficients are regressed to fugacities calculated using the Chao-Seader/Prausnitz-Shair correlations for standard state fugacity and Regular Solution. To supply your own coefficients you must enter them directly into the Aij and Bij matrices, as shown previously. No interaction between "non-condensable" component pairs is taken into account in the VLE calculations. Figure A.3 HYSYS does not contain a pre-fitted Henry's Law A coefficient for the ethane/ethanol pair. You can estimate it or provide your own value. Henry's Law A coefficient for the interaction between C2 and H2O. Normal binary interaction coefficient for the H2O/ Ethanol pair. C2 is a "non-condensable" component. Henry's Law is used for the interaction between C2 and the other components in the Fluid Package. Henry's Law B coefficient for the interaction between C2 and H2O. Henry's Law D coefficient for the interaction between C2 and H2O. Henry's Law C coefficient for the interaction between C2 and H2O.
- 422. Property Methods & Calculations A-39 A-39 A.3.3 Activity Model Vapour Phase Options There are several models available for calculating the Vapour Phase in conjunction with the selected liquid activity model. The selection depends on specific considerations of your system. However, in cases when you are operating at moderate pressures (less than 5 atm), selecting Ideal Gas should be satisfactory. The choices are described in the following sections. Ideal The ideal gas law is used to model the vapour phase. This model is appropriate for low pressures and for a vapour phase with little intermolecular interaction. Peng Robinson, SRK, or RK To model non-idealities in the vapour phase, the PR, SRK, or RK options can be used in conjunction with an activity model. The PR and SRK vapour phase models handle the same types of situations as the PR and SRK equations of state. When selecting one of these options (PR, SRK, or RK) as the vapour phase model, you must ensure that the binary interaction parameters used for the activity model remain applicable with the selected vapour model. You must keep in mind that all the binary parameters in the HYSYS Library are regressed using the ideal gas vapour model. For applications where you have compressors or turbines being modeled within your Flowsheet, PR or SRK is superior to either the RK or ideal vapour model. You obtain more accurate horsepower values by using PR or SRK, as long as the light components within your Flowsheet can be handled by the selected vapour phase model (i.e., C2H4 or C3H6 are fine, but alcohols are not modeled correctly). For more information, refer to Section A.3.1 - Equations of State.
- 423. A-40 Property Methods A-40 Virial The Virial option enables you to better model vapour phase fugacities of systems displaying strong vapour phase interactions. Typically this occurs in systems containing carboxylic acids or compounds that have the tendency to form stable H2 bonds in the vapour phase. In these cases, the fugacity coefficient shows large deviations from ideality, even at low or moderate pressures. HYSYS contains temperature dependent coefficients for carboxylic acids. You can overwrite these by changing the Association (ii) or Solvation (ij) coefficients from the default values.13 If the virial coefficients need to be calculated, HYSYS contains correlations using the following pure component properties: • critical temperature • critical pressure • dipole moment • mean radius of gyration • association parameter • association parameter for each binary pair HYSYS recommends you use the Virial option for organic acid components (like formic acid, acetic acid, propionic acid, butyric acid, and heptonic acid). If one of the mentioned acid is present in the stream, the entire mixture is treated using Chemical Theory of dimerization. The degrees of dimerization for each component is dependent on its association parameter as well as the cross association with other components.
- 424. Property Methods & Calculations A-41 A-41 This option is restricted to systems where the density is moderate, typically less than one-half the critical density. The Virial equation used is valid for the following range: A.3.4 Semi-Empirical Methods The Chao-Seader3 and Grayson-Streed6 methods are older, semi-empirical methods. The GS correlation is an extension of the CS method with special emphasis on H2. Only the equilibrium results produced by these correlations is used by HYSYS. The Lee-Kesler method is used for liquid and vapour enthalpies and entropies as its results are shown to be superior to those generated from the CS/GS correlations. This method is also adopted by and recommended for use in the API Technical Data Book. The following table gives an approximate range of applicability for these two methods, and under what conditions they are applicable. (A.23) Method Temp (°F) Temp (°C) Press (psia) Press (kPa) CS 0 to 500 -18 to 260 <1,500 <10,000 GS 0 to 800 -18 to 425 <3,000 <20,000 Conditions of Applicability For all hydrocarbons (except CH4): • 0.5<Tri<1.3 and Prmixture <0.8 If CH4 or H2 is present: • molal average Tr <0.93 • CH4 mole fraction <0.3 • mole fraction dissolved gases <0.2 When predicting K values for: • Paraffinic or Olefinic Mixtures • Aromatic Mixtures • liquid phase aromatic mole fraction <0.5 • liquid phase aromatic mole fraction >0.5 P T 2 -- - yiPci i 1 = ∑ yiTci i 1 = m ∑ -------------------- - ≤
- 425. A-42 Property Methods A-42 The GS correlation is recommended for simulating heavy hydrocarbon systems with a high H2 content, such as hydrotreating units. The GS correlation can also be used for simulating topping units and heavy ends vacuum applications. The vapour phase fugacity coefficients are calculated with the Redlich Kwong equation of state. The pure liquid fugacity coefficients are calculated using the principle of corresponding states. Modified acentric factors are included in HYSYS' GS library for most components. Special functions are incorporated for the calculation of liquid phase fugacities for N2, CO2 and H2S. These functions are restricted to hydrocarbon mixtures with less than five percent of each of the above components. As with the Vapour Pressure models, H2O is treated using a combination of the steam tables and the kerosene solubility charts from the API Data Book. This method of handling H2O is not very accurate for gas systems. Although three phase calculations are performed for all systems, it is important to note that the aqueous phase is always treated as pure H2O with these correlations. A.3.5 Vapour Pressure Property Packages Vapour pressure K value models may be used for ideal mixtures at low pressures. This includes hydrocarbon systems such as mixtures of ketones or alcohols where the liquid phase behaves approximately ideal. The models may also be used for first approximations for non-ideal systems. The Lee-Kesler model is used for enthalpy and entropy calculations for all vapour pressure models and all components with the exception of H2O, which is treated separately with the steam property correlation. All three phase calculations are performed assuming the aqueous phase is pure H2O and that H2O solubility in the hydrocarbon phase can be described using the kerosene solubility equation from the API Data Book (Figure 9A1.4).
- 426. Property Methods & Calculations A-43 A-43 Vapour pressures used in the calculation of the standard state fugacity are based on HYSYS' library coefficients and a modified form of the Antoine equation. Vapour pressure coefficients for hypocomponent may be entered or calculated from either the Lee-Kesler correlation for hydrocarbons, the Gomez-Thodos correlation for chemical compounds or the Reidel equation. The Vapour Pressure options include the Modified Antoine, BraunK10, and EssoK packages. Approximate ranges of application for each vapour pressure model are given below: Modified Antoine Vapour Pressure Model The modified Antoine equation assumes the form as set out in the DIPPR data bank. where: A, B, C, D, E and F = fitted coefficients Pvap = the pressure in kPa T = the temperature in K These coefficients are available for all HYSYS library components. Vapour pressure coefficients for hypocomponent may be entered or calculated from either the Lee-Kesler Because all of the Vapour Pressure options assume an ideal vapour phase, they are classified as Vapour Pressure Models. Model Temperature Press (psia) Press (kPa) Mod. Antoine <1.6 Tci <100 <700 BraunK10 0°F (-17.78°C) <1.6 Tci <100 <700 EssoK <1.6 Tci <100 <700 (A.24) Pvap ln A B T C + ------------- D T ET F + ln + + =
- 427. A-44 Property Methods A-44 correlation for hydrocarbons, the Gomez-Thodos correlation for chemical compounds, or the Reidel equation. This model is applicable for low pressure systems that behave ideally. For hydrocarbon components that you have not provided vapour pressure coefficients for, the model converts the Lee- Kesler vapour pressure model directly. As such, crude and vacuum towers can be modeled with this equation. When using this method for super-critical components, it is recommended that the vapour pressure coefficients be replaced with Henry's Law coefficients. Changing Vapour Pressure coefficients can only be accomplished if your component is being installed as a Hypothetical. Braun K10 Model The Braun K10 model is strictly applicable to heavy hydrocarbon systems at low pressures. The model employs the Braun convergence pressure method, where, given the normal boiling point of a component, the K value is calculated at system temperature and 10 psia. The K10 value is then corrected for pressure using pressure correction charts. The K values for any components that are not covered by the charts are calculated at 10 psia using the modified Antoine equation and corrected to system conditions using the pressure correction charts. Accuracy suffers with this model if there are large amounts of acid gases or light hydrocarbons. All three phase calculations assume that the aqueous phase is pure H2O and that H2O solubility in the hydrocarbon phase can be described using the kerosene solubility equation from the API Data Book (Figure 9A1.4). All enthalpy and entropy calculations are performed using the Lee-Kesler model. The Lee-Kesler model is used for enthalpy and entropy calculations for all components with the exception of H2O which is treated with the steam tables.
- 428. Property Methods & Calculations A-45 A-45 Esso K Model The Esso Tabular model is strictly applicable to hydrocarbon systems at low pressures. The model employs a modification of the Maxwell-Bonnel vapour pressure model in the following format: where: Ai = fitted constants Tb i = normal boiling point corrected to K = 12 T = absolute temperature K = Watson characterisation factor For heavy hydrocarbon systems, the results are comparable to the modified Antoine equation since no pressure correction is applied. For non-hydrocarbon components, the K value is calculated using the Antoine equation. Accuracy suffers if there is a large amount of acid gases or light hydrocarbons. All three phase calculations are performed assuming the aqueous phase is pure H2O and that H2O solubility in the hydrocarbon phase can be described using the kerosene solubility equation from the API Data Book (Figure 9A1.4). (A.25) The Lee-Kesler model is used for enthalpy and entropy calculations for all components with the exception of H2O which is treated with the steam tables. Pvap log Aix i ∑ = x i Tb i T ----- 0.0002867Tb i – 748.1 0.2145Tb i – ------------------------------------------- =
- 429. A-46 Property Methods A-46 A.3.6 Miscellaneous - Special Application Methods Amines Property Package The amines package contains the thermodynamic models developed by D.B. Robinson & Associates for their proprietary amine plant simulator, called AMSIM. Their amine property package is available as an option with HYSYS giving you access to a proven third party property package for reliable amine plant simulation, while maintaining the ability to use HYSYS' powerful flowsheeting capabilities. The chemical and physical property data base is restricted to amines and the following components: The equilibrium acid gas solubility and kinetic parameters for the aqueous alkanolamine solutions in contact with H2S and CO2 are incorporated into their property package. The amines property package is fitted to extensive experimental data gathered from a combination of D.B. Robinson's in-house data, several unpublished sources, and numerous technical references. For the Amine property method, the vapour phase is modeled using the PR model. Component Class Specific Components Acid Gases CO2, H2S, COS, CS2 Hydrocarbons CH4 C7H16 Olefins C2=, C3= Mercaptans M-Mercaptan, E-Mercaptan Non Hydrocarbons H2, N2, O2, CO, H2O This method does not allow any hypotheticals.
- 430. Property Methods & Calculations A-47 A-47 The following table gives the equilibrium solubility limitations that should be observed when using this property package: * The amine mixtures, DEA/MDEA and MEA/MDEA are assumed to be primarily MDEA, so use the MDEA value for these mixtures. The absorption of H2S and CO2 by aqueous alkanolamine solutions involves exothermic reactions. The heat effects are an important factor in amine treating processes and are properly taken into account in the amines property package. Correlations for the heats of solution are set up as a function of composition and amine type. The correlations were generated from existing published values or derived from solubility data using the Gibbs- Helmholtz equation. The amines package incorporates a specialized stage efficiency model to permit simulation of columns on a real tray basis. The stage efficiency model calculates H2S and CO2 component stage efficiencies based on the tray dimensions given and the calculated internal tower conditions for both absorbers and strippers. The individual component stage efficiencies are a function of pressure, temperature, phase compositions, flow rates, physical properties, mechanical tray design and dimensions as well as kinetic and mass transfer parameters. Since kinetic and mass transfer effects are primarily responsible for the H2S selectivity demonstrated by amine solutions, this must be accounted for by non unity stage efficiencies. Alkanolamine Alkanolamine Concentration (wt%) Acid Gas Partial Pressure (psia) Temperature (°F) Monoethanolamine, MEA 0 - 30 0.00001 - 300 77 - 260 Diethanolamine, DEA 0 - 50 0.00001 - 300 77 - 260 Triethanolamine, TEA 0 - 50 0.00001 - 300 77 - 260 Methyldiethanolamine, MDEA* 0 - 50 0.00001 - 300 77 - 260 Diglycolamine, DGA 50 - 70 0.00001 - 300 77 - 260 DIsoPropanolAmine, DIsoA 0 - 40 0.00001 - 300 77 - 260 The data is not correlated for H2S and CO2 loadings greater than 1.0 mole acid gas/mole alkanolamine. See Chapter 2 - Column Operations of the HYSYS Operations Guide for details on how to specify or have HYSYS calculate the stage
- 431. A-48 Property Methods A-48 Steam Package HYSYS includes two steam packages: • ASME Steam • NBS Steam Both of these property packages are restricted to a single component, namely H2O. ASME Steam accesses the ASME 1967 steam tables. The limitations of this steam package are the same as those of the original ASME steam tables, i.e., pressures less than 15,000 psia and temperatures greater than 32°F (0°C) and less than 1,500°F. The basic reference is the book “Thermodynamic and Transport Properties of Steam” - The American Society of Mechanical Engineers - Prepared by C.A. Meyer, R.B. McClintock, G.J. Silvestri and R.C. Spencer Jr.11 Selecting NBS_Steam uses the NBS 1984 Steam Tables, which reportedly has better calculations near the Critical Point. MBWR In HYSYS, a 32-term modified BWR equation of state is used. The modified BWR may be written in the following form: where: (A.26) P RTρ NiXi i 1 = 32 ∑ + = X1 ρ 2 T = X9 ρ 3 T2 ⁄ = X17 ρ 8 T ⁄ = X25 ρ 7 F ( ) T 3 ⁄ = X2 ρ 2 T 1 2 ⁄ = X10 ρ 4 T = X18 ρ 8 T 2 ⁄ = X26 ρ 9 F ( ) T 2 ⁄ = X3 ρ 2 = X11 ρ 4 = X19 ρ 9 T2 ( ) ⁄ = X27 ρ 9 F ( ) T 4 ⁄ =
- 432. Property Methods & Calculations A-49 A-49 F = exp (-0.0056 r2) The modified BWR is applicable only for the following pure components: X4 ρ 2 T ⁄ = X12 ρ 4 T ⁄ = X20 ρ 3 F ( ) T2 ( ) ⁄ = X28 ρ 11 F ( ) T 2 ⁄ = X5 ρ 2 T 2 ⁄ = X13 ρ 5 = X21 ρ 3 F ( ) T3 ( ) ⁄ = X29 ρ 11 F ( ) T 3 ⁄ = X6 ρ 3 T = X14 ρ 6 T ⁄ = X22 ρ 5 F ( ) T 2 ⁄ = X30 ρ 13 F ( ) T 2 ⁄ = X7 ρ 3 = X15 ρ 6 T 2 ⁄ = X23 ρ 5 F ( ) T 4 ⁄ = X31 ρ 13 F ( ) T 3 ⁄ = X8 ρ 3 T ⁄ = X16 ρ 7 T ⁄ = X24 ρ 7 F ( ) T 2 ⁄ = X32 ρ 13 F ( ) T 4 ⁄ = Component Temp (K) Temp (R) Max Press (MPa) Max Press (psia) Ar 84 - 400 151.2 - 720 100 14,504 CH4 91 - 600 163.8 - 1,080 200 29,008 C2H4 104 - 400 187.2 - 720 40 5,802 C2H6 90 - 600 162. - 1,080 70 10,153 C3H8 85 - 600 153. - 1080 100 14,504 i-C4 114 - 600 205.2 - 1,080 35 5,076 n-C4 135 - 500 243. - 900 70 10,153 CO 68 - 1,000 122.4 - 1,800 30 4,351 CO2 217 - 1,000 390.6 - 1,800 100 14,504 D2 29 - 423 52.2 - 761.4 320 46,412 H2 14 - 400 25.2 - 720 120 17,405 o-H2 14 - 400 25.2 - 720 120 17,405 p-H2 14 - 400 25.2 - 720 120 17,405 He 0.8 - 1,500 1.4 - 2,700 200 29,008 N2 63 - 1,900 113.4 - 3,420 1,000 145,038 O2 54 - 400 97.2 - 720 120 17,405 Xe 161 - 1,300 289.8 - 2,340 100 14,504 The mixtures of different forms of H2 are also acceptable. The range of use for these components is shown in the above table.
- 433. A-50 Enthalpy & Entropy Departure A-50 A.4 Enthalpy & Entropy Departure Calculations The Enthalpy and Entropy calculations are performed rigorously by HYSYS using the following exact thermodynamic relations: where: Ideal Gas Enthalpy basis ( ) used by HYSYS is equal to the ideal gas Enthalpy of Formation at 25°C Ideal Gas Entropy basis ( ) used by HYSYS is equal to the ideal gas Entropy of Formation at 25°C and 1 atm With semi-empirical and vapour pressure models, a pure liquid water phase is generated and the solubility of H2O in the hydrocarbon phase is determined from the kerosene solubility model. A.4.1 Equations of State For the Peng-Robinson Equation of State, the enthalpy and entropy departure calculations use the following relations: (A.27) (A.28) (A.29) H H ID – RT ------------------- - Z 1 – 1 RT ------ - T T ∂ ∂P V P – V d ∞ V ∫ + = S S° ID – RT ------------------- - Z ln P P° ------ - ln – 1 R -- - T ∂ ∂P V 1 V -- - – V d ∞ V ∫ + = H ID S° ID H H ID – RT ------------------- - Z 1 – 1 2 1.5 bRT ------------------- - a T t d da – V 2 0.5 1 + ( )b + V 2 0.5 1 – ( )b + ----------------------------------- - ln – =
- 434. Property Methods & Calculations A-51 A-51 where: Ideal Gas Enthalpy basis (HID ) used by HYSYS changes with temperature according to the coefficients on the TDep tab for each individual component For the SRK Equation of State: A and B term definitions are provided below: (A.30) (A.31) (A.32) (A.33) Peng-Robinson Soave-Redlich-Kwong bi ai aci mi S S° ID – R ------------------- - Z B – ( ) ln P P° ------ - ln – A 2 1.5 bRT ------------------- - T a -- - t d da V 2 0.5 1 + ( )b + V 2 0.5 1 – ( )b + ----------------------------------- - ln – = a xixj aiaj ( ) 0.5 1 kij – ( ) j 1 = N ∑ i 1 = N ∑ = H H ID – RT ------------------- - Z 1 – 1 bRT --------- - a T da dt ----- - – 1 b V -- - + ln – = S S° ID – RT ------------------- - Z b – ( ) ln P P° ------ - ln – A B -- - T a -- -da dt ----- - 1 B Z -- - + ln + = 0.077796 RTci Pci ---------- - 0.08664 RTci Pci ---------- - aciαi aciαi 0.457235 RTci ( ) 2 Pci ----------------- - 0.42748 RTci ( ) 2 Pci ----------------- - αi 1 mi 1 Tri 0.5 – ( ) + 1 mi 1 Tri 0.5 – ( ) + 0.37646 1.54226ωi 0.26992ωi 2 – + 0.48 1.574ωi 0.176ωi 2 – +
- 435. A-52 Enthalpy & Entropy Departure A-52 where: R = Ideal Gas constant H = Enthalpy S = Entropy subscripts: ID = Ideal Gas o = reference state PRSV The PRSV equation of state is an extension of the Peng-Robinson equation using an extension of the expression as shown below: This results in the replacement of the term in the definitions of the A and B terms shown previously by the term shown above. A.4.2 Activity Models The Liquid enthalpy and entropy for Activity Models is based on the Cavett Correlation as shown below: (A.34) a xixj aiaj ( ) 0.5 1 kij – ( ) j 1 = N ∑ i 1 = N ∑ = κ αi 1 κi 1 Tr 0.5 – ( ) + [ ] 2 = κi κ0i 1 Tri 0.5 + ( ) 0.7 Tri – ( ) = κ0i 0.378893 1.4897153ωi 0.17131848ωi 2 – 0.0196554ωi 3 + + = αi αi
- 436. Property Methods & Calculations A-53 A-53 for Tri < 1: for Tri 1: where: a1, a2, a3 = functions of the Cavett parameter, fitted to match one known heat of vapourization The Gas enthalpies and entropies are dependent on the model chosen to represent the vapour phase behaviour: • Ideal Gas: (A.35) (A.36) (A.37) (A.38) (A.39) (A.40) H L H ID – Tci ---------------------- - max Hi° ∆ L sb ( ) Tci -------------------------- Hi° ∆ L sb ( ) Tci -------------------------- , = ≥ H L H ID – Tci ---------------------- - max Hi° ∆ L sb ( ) Tci -------------------------- Hi° ∆ L sp ( ) Tci -------------------------- , = Hi° ∆ L sb ( ) Tci -------------------------- a1 a2 1 Tri – ( ) 1 a3 Tr i 0.1 – ( ) – + = Hi° ∆ L sp ( ) Tci -------------------------- max 0 b1 b2Tri 2 b3Tri 3 b4Tri 4 b5Tri 2 + + + + , ( ) = H H ID = S S° ID Cv T d T ------------ - T1 T2 ∫ R V2 V1 ----- - ln + = =
- 437. A-54 Enthalpy & Entropy Departure A-54 • Redlich-Kwong: • Virial Equation: where: B = second virial coefficient of the mixture A.4.3 Lee-Kesler Option The Lee and Kesler method is an effort to extend the method originally proposed by Pitzer to temperatures lower than 0.8 Tr. Lee and Kesler expanded Pitzer's method expressing the compressibility factor as: where: Z o = the compressibility factor of a simple fluid Z r = the compressibility factor of a reference fluid (A.41) (A.42) (A.43) (A.44) (A.45) H H ID – RT ------------------- - Z 1 – 1.5 bRT --------- - 1 b V -- - + ln – = S S° ID – RT ------------------- - Z b – ( ) ln P P° ------ - ln – A 2B ------ - 1 B Z -- - + ln + = H H ID – RT ------------------- - T V B – ------------ - dB dt ------ - – Z 1 – ( ) + = S S° ID – R ------------------- - RT V B – ------------ - dB dT ------ - – R V V B – ------------ - ln – R V V° ------ - ln + = The SRK and PR are given in Section A.3.1 - Equations of State. Z Z° ω ω r ---- - Zr Z° – ( ) + =
- 438. Property Methods & Calculations A-55 A-55 They chose the reduced form of the BWR equation of state to represent both Z o and Z r : where: The constants in these equations were determined using experimental compressibility and enthalpy data. Two sets of constants, one for the simple fluid ( ) and one for the reference fluid ( ) were determined. The Enthalpy and Entropy departures are computed as follows: (A.46) (A.47) (A.48) Z 1 B Vr ---- - C Vr 2 ----- - D Vr 5 ----- - D Tr 3 Vr 3 ----------- - β γ Vr 2 ----- - – e γ Vr 2 ----- - – + + + + = Vr VPc RTc --------- = B b1 b2 Tr ---- - – b3 Tr 2 ----- – b4 Tr 4 ----- – = C c1 c2 Tr ---- - – c3 Tr 3 ----- + = D d1 d2 Tr ---- - + = ω° 0 = ω r 0.3978 n C8 – , = H H ID – RTc ------------------- - Tr Z 1 – b2 2 b3 Tr ---- - 3 b4 Tr 2 ----- + + TrVr ------------------------------------ - – c2 3 c3 Tr 2 ----- – 2TrVr 2 ------------------- - – d2 5TrVr 5 -------------- - – 3E + = S S° ID – R ------------------- - Z ln P P° ------ - ln – b1 b3 Tr 2 ----- 2 b4 Tr 3 ----- + + Vr --------------------------------- – c1 3 c3 Tr 2 ----- – 2Vr 2 ------------------- - – d1 5Vr 2 -------- - – 2E + =
- 439. A-56 Enthalpy & Entropy Departure A-56 For mixtures, the Critical Properties are defined as follows: Fugacity Coefficient The fugacity coefficient calculations for SRK and Peng Robinson models is shown below. Soave-Redlich-Kwong (A.49) (A.50) E c4 2Tr 3 γ ------------ - β 1 β 1 γ Vr 2 ----- - + + e γ Vr ---- - – – + = ω xiωi i 1 = N ∑ = zci 0.2905 0.0851ωi – = Vci Zci RTci Pci ----------------- = Vc 1 8 -- - xixj Vci 1 3 -- - Vcj 1 3 -- - + 3 j 1 = N ∑ i 1 = N ∑ = Tc 1 8Vc -------- - xixj Vci 1 3 -- - Vcj 1 3 -- - + 3 Tci Tcj ( ) 0.5 j 1 = N ∑ i 1 = N ∑ = Pc 0.2905 0.085ω – ( ) RTc Vc -------- - = φi ln Z Pb RT ------ - – ln – Z 1 – ( ) bi b --- - a bRT --------- - 1 a -- - 2ai 0.5 xjaj 0.5 1 kij – ( ) j 1 = N ∑ bi b --- - – 1 b V -- - + ln – + =
- 440. Property Methods & Calculations A-57 A-57 Peng Robinson A.5 Physical & Transport Properties The physical and transport properties that HYSYS calculates for a given phase are viscosity, density, thermal conductivity, and surface tension. The models used for the transport property calculations are all pre-selected to yield the best fit for the system under consideration. For example, the corresponding states model proposed by Ely and Hanley is used for viscosity predictions of light hydrocarbons (NBP<155), the Twu methodology for heavier hydrocarbons, and a modification of the Letsou-Stiel method for predicting the liquid viscosities of non-ideal chemical systems. A complete description of the models used for the prediction of the transport properties can be found in the references listed in each sub-section. All these models are modified by Hyprotech to improve the accuracy of the correlations. In the case of multiphase streams, the transport properties for the mixed phase are meaningless and are reported as <empty>, although the single phase properties are known. There is an exception with the pipe and heat exchanger operations. For three-phase fluids, HYSYS uses empirical mixing rules to determine the apparent properties for the combined liquid phases. (A.51) φi ln Z Pb RT ------ - – ln – Z 1 – ( ) bi b --- - a 2 1.5 bRT ------------------- - 1 a -- - 2ai 0.5 xjaj 0.5 1 kij – ( ) j 1 = N ∑ bi b --- - – V 2 0.5 1 + ( )b + V 2 0.5 1 – ( )b – ----------------------------------- - ln – + =
- 441. A-58 Physical & Transport Properties A-58 A.5.1 Liquid Density Saturated liquid volumes are obtained using a corresponding states equation developed by R. W. Hankinson and G. H. Thompson7 which explicitly relates the liquid volume of a pure component to its reduced temperature and a second parameter termed the characteristic volume. This method is adopted as an API standard. The pure compound parameters needed in the corresponding states liquid density (COSTALD) calculations are taken from the original tables published by Hankinson and Thompson, and the API Data Book for components contained in HYSYS' library. The parameters for hypothetical components are based on the API gravity and the generalized Lu equation. Although the COSTALD method was developed for saturated liquid densities, it can be applied to sub-cooled liquid densities, i.e., at pressures greater than the vapour pressure, using the Chueh and Prausnitz correction factor for compressed fluids. It is used to predict the density for all systems whose pseudo-reduced temperature is below 1.0. Above this temperature, the equation of state compressibility factor is used to calculate the liquid density. Hypocomponents generated in the Oil Characterization Environment have their densities either calculated from internal correlations or generated from input curves. Given a bulk density, the densities of the hypocomponent are adjusted such that: The characteristic volume for each hypocomponent is calculated using the adjusted densities and the physical properties. The calculated characteristic volumes are then adjusted such that the bulk density calculated from the COSTALD equation matches the density calculated using the above equation. This ensures that a given volume of fluid contains the same mass whether it (A.52) ρbulk 1.0 xi ρi° ------- - ∑ ----------- - =
- 442. Property Methods & Calculations A-59 A-59 is calculated with the sum of the component densities or the COSTALD equation. A.5.2 Vapour Density The density for all vapour systems at a given temperature and pressure is calculated using the compressibility factor given by the equation of state or by the appropriate vapour phase model for Activity Models. A.5.3 Viscosity HYSYS automatically selects the model best suited for predicting the phase viscosities of the system under study. The model selected is from one of the three available in HYSYS: a modification of the NBS method (Ely and Hanley), Twu's model, or a modification of the Letsou-Stiel correlation. HYSYS selects the appropriate model using the following criteria: All of the models are based on corresponding states principles and are modified for more reliable application. Internal validation showed that these models yielded the most reliable results for the chemical systems shown. Viscosity predictions for light hydrocarbon liquid phases and vapour phases were found to be handled more reliably by an in-house modification of the original Ely and Hanley model, heavier hydrocarbon liquids were more effectively handled by Twu's model, and chemical systems were more accurately handled by an in-house modification of the original Letsou-Stiel model. A complete description of the original corresponding states (NBS) model used for viscosity predictions is presented by Ely and Hanley in their NBS publication. The original model is modified to eliminate the iterative procedure for calculating the Chemical System Vapour Phase Liquid Phase Lt Hydrocarbons (NBP<155°F) Mod Ely & Hanley Mod Ely & Hanley Hvy Hydrocarbons (NBP>155°F) Mod Ely & Hanley Twu Non-Ideal Chemicals Mod Ely & Hanley Mod Letsou-Stiel
- 443. A-60 Physical & Transport Properties A-60 system shape factors. The generalized Leech-Leland shape factor models are replaced by component specific models. HYSYS constructs a PVT map for each component using the COSTALD for the liquid region. The shape factors are adjusted such that the PVT map can be reproduced using the reference fluid. The shape factors for all the library components are already regressed and included in the Pure Component Library. Hypocomponent shape factors are regressed using estimated viscosities. These viscosity estimations are functions of the hypocomponent Base Properties and Critical Properties. Hypocomponents generated in the Oil Characterization Environment have the additional ability of having their shape factors regressed to match kinematic or dynamic viscosity assays. The general model employs CH4 as a reference fluid and is applicable to the entire range of non-polar fluid mixtures in the hydrocarbon industry. Accuracy for highly aromatic or naphthenic crudes is increased by supplying viscosity curves when available, since the pure component property generators were developed for average crude oils. The model also handles H2O and acid gases as well as quantum gases. Although the modified NBS model handles these systems very well, the Twu method was found to do a better job of predicting the viscosities of heavier hydrocarbon liquids. The Twu model16 is also based on corresponding states principles, but has implemented a viscosity correlation for n-alkanes as its reference fluid instead of CH4. A complete description of this model is given in the paper entitled “Internally Consistent Correlation for Predicting Liquid Viscosities of Petroleum Fractions”21. For chemical systems the modified NBS model of Ely and Hanley is used for predicting vapour phase viscosities, whereas a modified form of the Letsou-Stiel model is used for predicting the liquid viscosities. This method is also based on corresponding states principles and was found to perform satisfactorily for the components tested.
- 444. Property Methods & Calculations A-61 A-61 The shape factors contained in the HYSYS Pure Component Library are fit to match experimental viscosity data over a broad operating range. Although this yields good viscosity predictions as an average over the entire range, improved accuracy over a narrow operating range can be achieved by using the Tabular features. A.5.4 Liquid Phase Mixing Rules for Viscosity The estimates of the apparent liquid phase viscosity of immiscible Hydrocarbon Liquid - Aqueous mixtures are calculated using the following "mixing rules": • If the volume fraction of the hydrocarbon phase is greater than or equal to 0.5, the following equation is used22 : where: = apparent viscosity = viscosity of Hydrocarbon phase = volume fraction Hydrocarbon phase • If the volume fraction of the hydrocarbon phase is less than 0.33, the following equation is used5: where: = apparent viscosity = viscosity of Hydrocarbon phase = viscosity of Aqueous phase = volume fraction Hydrocarbon phase (A.53) (A.54) For more information on the Tabular features, refer to Chapter 2 - Fluid Package. µeff µoile 3.6 1 νoil – ( ) = µeff µoil νoil µeff 1 2.5νoil µoil 0.4µH2O + µoil µH2O + ---------------------------------- - + µH2O = µeff µoil µH2O νoil
- 445. A-62 Physical & Transport Properties A-62 • If the volume of the hydrocarbon phase is between 0.33 and 0.5, the effective viscosity for combined liquid phase is calculated using a weighted average between Equation (A.53) and Equation (A.54). The remaining properties of the pseudo phase are calculated as follows: A.5.5 Thermal Conductivity As in viscosity predictions, a number of different models and component specific correlations are implemented for prediction of liquid and vapour phase thermal conductivities. The text by Reid, Prausnitz and Poling18 was used as a general guideline in determining which model was best suited for each class of components. For hydrocarbon systems the corresponding states method proposed by Ely and Hanley4 is generally used. The method requires molecular weight, acentric factor and ideal heat capacity for each component. These parameters are tabulated for all library components and may either be input or calculated for hypothetical components. It is recommended that all of these parameters be supplied for non-hydrocarbon hypotheticals to ensure reliable thermal conductivity coefficients and enthalpy departures. The modifications to the method are identical to those for the viscosity calculations. Shape factors calculated in the viscosity routines are used directly in the thermal conductivity equations. The accuracy of the method depends on the consistency of the original PVT map. (A.55) MWeff xiMWi ∑ = ρeff 1 xi ρi ---- - ∑ -------------- - = Cpeff xiCpi ∑ = (molecular weight) (mixture density) (mixture specific heat)
- 446. Property Methods & Calculations A-63 A-63 For vapour phase thermal conductivity predictions, the Misic and Thodos, and Chung et al.16 methods are used (except for H2O, C1, H2, CO2, NH3 which use a polynomial for pure components). The effect of higher pressure on thermal conductivities is taken into account by the Chung et al. method. For liquid phase thermal conductivity predictions, the following methods are used: • For pure water, the Steam Tables is used. • For water, C1, C2, C3, 3M-3Epentane, propene, DEG, TEG, EG, He, H2, Ethylene, Ammonia, a proprietary polynomial correlation is used. If both water and DEG are present in the mixture, additional corrections are made for these two compounds. • For Hydrocarbons with MW > 140 and TR < 0.8, a modified Missenard & Reidel method16 is used. • For Alcohol, Ester, and other Hydrocarbons not included in the previous categories, the Latini method16 is used. • For all other compounds, the Sato-Reidel method is used. The liquid phase thermal conductivity is calculated using the following mixing rule: where: = liquid thermal conductivity of the mixture = liquid thermal conductivity of component i = mole fraction of component i (A.56) λmix xiλi 1 3 ⁄ i ∑ 3 = λmix λi xi
- 447. A-64 Physical & Transport Properties A-64 As with viscosity, the thermal conductivity for two liquid phases is approximated by using empirical mixing rules for generating a single pseudo liquid phase property. The thermal conductivity for this pseudo liquid phase is calculated by the following equation15 : where: = liquid thermal conductivity of the combined two liquid phases = liquid thermal conductivity of liquid phase i at temperature T = liquid thermal conductivity of liquid phase j at temperature T = molar phase fraction of liquid phase i = molar volume of liquid phase i = molar phase fraction of liquid phase k = molar volume of liquid phase k For a two liquid phase system the equation simplifies to: (A.57) (A.58) λLmix φLi φLj λLij j ∑ i ∑ = λLmix λLij 2 1 λLi ⁄ ( ) 1 λLj ⁄ ( ) + -------------------------------------------------- - = λLi λLj φLi xLi VLi xLk VLk k 1 = ∑ ------------------------- - = xLi VLi xLk VLk λLmix φL1 2 λL1 2φL1 φL2 λ12 φL2 2 λL2 + + =
- 448. Property Methods & Calculations A-65 A-65 A.5.6 Surface Tension Surface tensions for hydrocarbon systems are calculated using a modified form of the Brock and Bird equation17 . The equation expresses the surface tension ( ) as a function of the reduced and critical properties of the component. The basic form of the equation was used to regress parameters for each family of components. where: = surface tension (dynes/cm2 ) TBR = reduced boiling point temperature (Tb/Tc) a = parameter fitted for each chemical class b = (parameter fitted for each chemical class, expanded as a polynomial in acentricity) For aqueous systems, HYSYS employs a polynomial to predict the surface tension. A.5.7 Heat Capacity Heat Capacity is calculated using a rigorous Cv value whenever HYSYS can. The method used is given by the following equations: (A.59) HYSYS predicts only liquid-vapour surface tensions. (A.60) σ σ Pc 2 3 ⁄ Tc 1 3 ⁄ Q 1 TR – ( ) a b × = σ Q 0.1207 1 TBR Pc ln × 1.0 TBR – --------------------------- - + 0.281 – = co c1ω c2ω2 c3ω3 + + + Cp Cv – T – dV dT ⁄ ( ) 2 dV dT ⁄ ( ) ⁄ ⋅ =
- 449. A-66 Volumetric Flow Rate Calculations A-66 However, when ever this equation fails to provide an answer, HYSYS falls back to the semi-ideal Cp/Cv method by computing Cp/Cv as Cp/(Cp-R), which is only approximate and valid for ideal gases. Examples of when HYSYS uses the ideal method are: • Equation (A.60) fails to return an answer • The stream has a solid phase • abs(dV/dP) < 1e-12 • Cp/Cv < 0.1or Cp/Cv > 20 - this is outside the range of applicability of the equation used so HYSYS falls back to the ideal method A.6 Volumetric Flow Rate Calculations HYSYS has the ability to interpret and produce a wide assortment of flow rate data. It can accept several types of flow rate information for stream specifications as well as report back many different flow rates for streams, their phases and their components. One drawback of the large variety available is that it often leads to some confusion as to what exactly is being specified or reported, especially when volumetric flow rates are involved. In the following sections, the available flow rates are listed, each corresponding density basis is explained, and the actual formulation of the flow rate calculations is presented. For volumetric flow rate data that is not directly accepted as a stream specification, a final section is provided that outlines techniques to convert your input to mass flow rates. A.6.1 Available Flow Rates Many types of flow rates appear in HYSYS output. However, only a subset of these are available for stream specifications.
- 450. Property Methods & Calculations A-67 A-67 Flow Rates Reported in the Output The flow rate types available through the numerous reporting methods - property views, workbook, PFD, specsheets, and so forth are: • Molar Flow • Mass Flow • Std Ideal Liq Vol Flow • Liq Vol Flow @Std Cond • Actual Volume Flow • Std Gas Flow • Actual Gas Flow Flow Rates Available for Specification The following flow rate types are available for stream specifications: • Molar Flows • Mass Flows • LiqVol Flows A.6.2 Liquid & Vapour Density Basis All calculations for volumetric stream flows are based on density. HYSYS uses the following density basis: Density Basis Description Std Ideal Liq Mass Density This is calculated based on ideal mixing of pure component ideal densities at 60°F. Liq Mass Density @Std Cond This is calculated rigorously at the standard reference state for volumetric flow rates. Actual Liquid Density This is calculated rigorously at the flowing conditions of the stream (i.e., at stream T and P). Standard Vapour Density This is determined directly from the Ideal Gas law. Actual Vapour Density This is calculated rigorously at the flowing conditions of the stream (i.e., at stream T and P). The volumetric flow rate reference state is defined as 60°F and 1 atm when using Field units or 15°C and 1 atm when using SI units. Actual Densities are calculated at the stream Temperature and Pressure.
- 451. A-68 Volumetric Flow Rate Calculations A-68 Calculation of Standard & Actual Liquid Densities The Standard and Actual liquid densities are calculated rigorously at the appropriate T and P using the internal methods of the chosen property package. Flow rates based upon these densities automatically take into account any mixing effects exhibited by non-ideal systems. Thus, these volumetric flow rates may be considered as "real world". Calculation of Standard Ideal Liquid Mass Density Contrary to the rigorous densities, the Standard Ideal Liquid Mass density of a stream does not take into account any mixing effects due to its simplistic assumptions. Thus, flow rates that are based upon it do not account for mixing effects and are more empirical in nature. The calculation is as follows: where: xi = molar fraction of component i = pure component Ideal Liquid density HYSYS contains Ideal Liquid densities for all components in the Pure Component Library. These values are determined in one of three ways, based on the characteristics of the component, as described below: • Case 1 - For any component that is a liquid at 60°F and 1 atm, the data base contains the density of the component at 60°F and 1 atm. (A.61) Ideal DensityStream 1 xi ρi Ideal -------------- ∑ ------------------ - = ρi Ideal
- 452. Property Methods & Calculations A-69 A-69 • Case 2 - For any component that can be liquified at 60°F and pressures greater than 1 atm, the data base contains the density of the component at 60°F and Saturation Pressure. • Case 3 - For any component that is non-condensable at 60°F under any pressure, i.e., 60°F is greater than the critical temperature of the component, the data base contains GPA tabular values of the equivalent liquid density. These densities were experimentally determined by measuring the displacement of hydrocarbon liquids by dissolved non-condensable components. For all hypothetical components, the Standard Liquid density (Liquid Mass Density @Std Conditions) in the Base Properties is used in the Ideal Liquid density (Std Ideal Liq Mass Density) calculation. If a density is not supplied, the HYSYS estimated liquid mass density (at standard conditions) is used. Special treatment is given by the Oil Characterization feature to its hypocomponent such that the ideal density calculated for its streams match the assay, bulk property, and flow rate data supplied in the Oil Characterization Environment. A.6.3 Formulation of Flow Rate Calculations The various procedures used to calculate each of the available flow rates are detailed below, based on a known molar flow. Molar Flow Rate Mass Flow (A.62) (A.63) Total Molar Flow Molar FlowStream = Mass Flow Total Molar Flow MWStream × =
- 453. A-70 Volumetric Flow Rate Calculations A-70 Std Ideal Liq Vol Flow This volumetric flow rate is calculated using the ideal density of the stream and thus is somewhat empirical in nature. Liq Vol Flow @Std Cond This volumetric flow rate is calculated using a rigorous density calculated at standard conditions, and reflects non-ideal mixing effects. Actual Volume Flow This volumetric flow rate is calculated using a rigorous liquid density calculation at the actual stream T and P conditions, and reflects non-ideal mixing effects. Standard Gas Flow Standard gas flow is based on the molar volume of an ideal gas at standard conditions. It is a direct conversion from the stream's molar flow rate, based on the following: • Ideal Gas at 60°F and 1 atm occupies 379.46 ft3/lbmole • Ideal Gas at 15°C and 1 atm occupies 23.644 m3 /kgmole (A.64) (A.65) (A.66) Even if a stream is all vapour, it still has a Liq Volume flow, based upon the stream's Standard Ideal Liquid Mass density, whose calculation is detailed in the previous section. LiqVolFlow Total Molar Flow MWStream × Ideal DensityStream --------------------------------------------------------------------------- = Std Liquid Volume Flow Molar Flow MW × Std Liq Density --------------------------------------------- - = Actual Volume Flow Molar Flow MW × Density --------------------------------------------- - =
- 454. Property Methods & Calculations A-71 A-71 Actual Gas Flow This volumetric flow rate is calculated using a rigorous vapour density calculation at the actual stream T and P conditions, and reflects non-ideal mixing and compressibility effects. A.6.4 Volumetric Flow Rates as Specifications If you require that the flow rate of your stream be specified based on actual density or standard density as opposed to Standard Ideal Mass Liquid density, you must use one of the following procedures: Liq Vol Flow @Std Cond 1. Specify the composition of your stream. 2. Use the standard ideal liquid mass density reported for the stream and calculate the corresponding mass flow rate either manually, or in the SpreadSheet. 3. Use this calculated mass flow as the specification for the stream. Actual Liquid Volume Flow 1. Specify the composition and the flowing conditions (T and P) of your stream. 2. Use the density reported for the stream and calculate the corresponding mass flow rate either manually, or in our spreadsheet. 3. Use this calculated mass flow as the specification for the stream. (A.67) Actual Gas Flow Molar Flow MW × Density --------------------------------------------- - =
- 455. A-72 Flash Calculations A-72 A.7 Flash Calculations Rigorous three phase calculations are performed for all equations of state and activity models with the exception of Wilson's equation, which only performs two phase vapour-liquid calculations. As with the Wilson Equation, the Amines and Steam property packages only support two phase equilibrium calculations. HYSYS uses internal intelligence to determine when it can perform a flash calculation on a stream, and then what type of flash calculation needs to be performed on the stream. This is based completely on the degrees of freedom concept. Once the composition of a stream and two property variables are known, (vapour fraction, temperature, pressure, enthalpy or entropy) one of which must be either temperature or pressure, the thermodynamic state of the stream is defined. When HYSYS recognizes that a stream is thermodynamically defined, it performs the correct flash automatically in the background. You never have to instruct HYSYS to perform a flash calculation. Property variables can either be specified by you or back- calculated from another unit operation. A specified variable is treated as an independent variable. All other stream properties are treated as dependent variables and are calculated by HYSYS. In this manner, HYSYS also recognizes when a stream is overspecified. For example, if you specify three stream properties plus composition, HYSYS prints out a warning message that an inconsistency exists for that stream. This also applies to streams where an inconsistency is created through HYSYS calculations. For example, if a stream Temperature and Pressure are specified in a flowsheet, but HYSYS back-calculates a different temperature for that stream as a result of an enthalpy balance across a unit operation, HYSYS generates an Inconsistency message. Specified variables can only be re-specified by you or through Recycle Adjust, or SpreadSheet operations. They do not change through any heat or material balance calculations. If a flash calculation is performed on a stream, HYSYS knows all the property values of that stream, i.e., thermodynamic, physical and transport properties.
- 456. Property Methods & Calculations A-73 A-73 A.7.1 T-P Flash Calculation The independent variables for this type of flash calculation are the temperature and pressure of the system, while the dependent variables are the vapour fraction, enthalpy, and entropy. With the equations of state and activity models, rigorous calculations are performed to determine the co-existence of immiscible liquid phases and the resulting component distributions by minimization of the Gibbs free energy term. For vapour pressure models or the semi-empirical methods, the component distribution is based on the Kerosene solubility data (Figure 9A1.4 of the API Data Book). If the mixture is single-phase at the specified conditions, the property package calculates the isothermal compressibility (dv/ dp) to determine if the fluid behaves as a liquid or vapour. Fluids in the dense-phase region are assigned the properties of the phase that best represents their current state. HYSYS automatically performs the appropriate flash calculation when it recognizes that sufficient stream information is known. This information is either specified by the user or calculated by an operation. Depending on the known stream information, HYSYS performs one of the following flashes: T-P, T-VF, T-H, T-S, P- VF, P-H, or P-S. The material solids appear in the liquid phase of two-phase mixtures, and in the heavy (aqueous/slurry) phase of three- phase systems. Therefore, when a separator is solved using a T-P flash, the vapour phase is identical regardless of whether or not solids are present in the feed to the flash drum. Use caution in specifying solids with systems that are otherwise all vapour. Small amounts of non-solids may appear in the "liquid" phase. See Section 2.4.4 - Stability Test Tab for options on how to instruct HYSYS to perform phase stability tests.
- 457. A-74 Flash Calculations A-74 A.7.2 Vapour Fraction Flash Vapour fraction and either temperature or pressure are the independent variables for this type of calculation. This class of calculation embodies all fixed quality points including bubble points (vapour pressure) and dew points. To perform bubble point calculation on a stream of known composition, simply specify the Vapour Fraction of the stream as 0.0 and define the temperature or pressure at which the calculation is desired. For a dew point calculation, simply specify the Vapour Fraction of the stream as 1.0 and define the temperature or pressure at which the dew point calculation is desired. Like the other types of flash calculations, no initial estimates are required. The vapour fraction is always shown in terms of the total number of moles. For example, the vapour fraction (VF) represents the fraction of vapour in the stream, while the fraction, (1.0 - VF), represents all other phases in the stream (i.e., a single liquid, 2 liquids, a liquid and a solid). Dew Points Given a vapour fraction specification of 1.0 and either temperature or pressure, the property package calculates the other dependent variable (P or T). If temperature is the second independent variable, HYSYS calculates the dew point pressure. Likewise, if pressure is the independent variable, then the dew point temperature is calculated. Retrograde dew points may be calculated by specifying a vapour fraction of -1.0. It is important to note that a dew point that is retrograde with respect to temperature can be normal with respect to pressure and vice versa. All of the solids appear in the liquid phase.
- 458. Property Methods & Calculations A-75 A-75 Bubble Points/Vapour Pressure A vapour fraction specification of 0.0 defines a bubble point calculation. Given this specification and either temperature or pressure, the property package calculates the unknown T or P variable. As with the dew point calculation, if the temperature is known, HYSYS calculates the bubble point pressure and conversely, given the pressure, HYSYS calculates the bubble point temperature. For example, by fixing the temperature at 100°F, the resulting bubble point pressure is the true vapour pressure at 100°F. Quality Points Bubble and dew points are special cases of quality point calculations. Temperatures or pressures can be calculated for any vapour quality between 0.0 and 1.0 by specifying the desired vapour fraction and the corresponding independent variable. If HYSYS displays an error when calculating vapour fraction, then this means that the specified vapour fraction doesn't exist under the given conditions, i.e., the specified pressure is above the cricondenbar, or the given temperature lies to the right of the cricondentherm on a standard P-T envelope. Vapour pressure and bubble point pressure are synonymous. HYSYS calculates the retrograde condition for the specified vapour quality if the vapour fraction is input as a negative number.
- 459. A-76 Flash Calculations A-76 A.7.3 Enthalpy Flash Given the enthalpy and either the temperature or pressure of a stream, the property package calculates the unknown dependent variables. Although the enthalpy of a stream cannot be specified directly, it often occurs as the second property variable as a result of energy balances around unit operations such as valves, heat exchangers and mixers. If HYSYS responds with an error message, and cannot find the specified property (temperature or pressure), this probably means that an internally set temperature or pressure bound was encountered. Since these bounds are set at quite large values, there is generally some erroneous input that is directly or indirectly causing the problem, such as an impossible heat exchange. A.7.4 Entropy Flash Given the entropy and either the temperature or pressure of a stream, the property package calculates the unknown dependent variables. A.7.5 Electrolyte Flash The electrolyte stream flash differs from the HYSYS material stream flash to handle the complexities of speciation for aqueous electrolyte systems. The HYSYS OLI Interface package is an interface to the OLI Engine (OLI Systems) that enables simulations within HYSYS using the full functionality and capabilities of the OLI Engine for flowsheet simulation. If a specified amount of energy is to be added to a stream, this may be accomplished by specifying the energy stream into either a Cooler/Heater or Balance operation. Refer to the HYSYS OLI Interface Reference Guide for detailed information on electrolyte flash and aqueous thermodynamics.
- 460. Property Methods & Calculations A-77 A-77 When the OLI_Electrolyte property package is associated with material streams, the streams exclusively become electrolyte material streams in the flowsheet. That is, the stream conducts a simultaneous phase and reaction equilibrium flash. For the model used and the reactions involved in the flash calculation, refer to the HYSYS OLI Interface Reference Guide. An electrolyte material stream in HYSYS can perform the following type of flashes: • TP Flash • PH Flash • TH Flash • PV Flash • TV Flash Due to the involvement of reactions in the stream flash, the equilibrium stream flash may result in a different molar flow and composition from the specified value. Therefore, mass and energy are conserved for an electrolyte material stream against the HYSYS stream for mass, molar and energy balances. Limitations exist in the HYSYS OLI Interface package in the calculation of the stream flash results. The calculation for the electrolyte flash results must fall within the following physical ranges to be valid. • composition of H2O in aqueous phase must be > 0.65. • Temperature must be between 0 and 300°C. • Pressure must be between 0 and 1500 atm. • Ionic strength must be between 0 and 30 mole/kg-H2O. A.7.6 Handling of Water Water is handled differently depending on the correlation being used. The PR and PRSV equations are enhanced to handle H2O rigorously whereas the semi-empirical and vapour pressure models treat H2O as a separate phase using steam table correlations. Refer to Section 1.7 - Range of Applicability of the HYSYS OLI Interface Reference Guide for more information on the limitations of the HEO models.
- 461. A-78 Flash Calculations A-78 In these correlations, H2O is assumed to form an ideal, partially- miscible mixture with the hydrocarbons and its K value is computed from the relationship: where: p° = vapour pressure of H2O from Steam Tables P = system pressure xs = solubility of H2O in hydrocarbon liquid at saturation conditions. The value for xs is estimated by using the solubility data for kerosene as shown in Figure 9A1.4 of the API Data Book2 . This approach is generally adequate when working with heavy hydrocarbon systems. However, it is not recommended for gas systems. For three phase systems, only the PR and PRSV property package and Activity Models allow components other than H2O in the second liquid phase. Special considerations are given when dealing with the solubilities of glycols and CH3OH. For acid gas systems, a temperature dependent interaction parameter was used to match the solubility of the acid component in the water phase. The PR equation considers the solubility of hydrocarbons in H2O, but this value may be somewhat low. The reason for this is that a significantly different interaction parameter must be supplied for cubic equations of state to match the composition of hydrocarbons in the water phase as opposed to the H2O composition in the hydrocarbon phase. For the PR equation of state, the latter case was assumed more critical. The second binary interaction parameter in the PRSV equation allows for an improved solubility prediction in the alternate phase. With the activity coefficient models, the limited mutual solubility of H2O and hydrocarbons in each phase can be taken into account by implementing the insolubility option (please refer to (A.68) Kω p° xsP ( ) ------------ - =
- 462. Property Methods & Calculations A-79 A-79 Section A.3.2 - Activity Models). HYSYS generates, upon request, interaction parameters for each activity model (with the exception of the Wilson equation) that are fitted to match the solubility of H2O in the liquid hydrocarbon phase and hydrocarbons in the aqueous phase based on the solubility data referred to in that section. The Peng-Robinson and SRK property packages will always force the water rich phase into the heavy liquid phase of a three phase stream. As such, the aqueous phase is always forced out of the bottom of a three phase separator, even if a light liquid phase (hydrocarbon rich) does not exist. Solids are always carried in the second liquid phase. A.7.7 Supercritical Handling HYSYS reports a vapor fraction of zero or one, for a stream under supercritical conditions. Theoretically, this value doesn’t have any physical meaning for a supercritcial fluid, since there is no distinction of liquid or vapor phases in a supercritical region. However, it is important to determine if a supercritical fluid is liquid-like or a vapor-like fluid. This is because some of the properties reported in HYSYS are calculated using certain sets of specific phase models. In other words, phase identification has to be carried out in order to decide which model to use to calculate these properties. In HYSYS, all flash results go through a phase order function to identify the phase type. Different packages have their own different order. For example, the following criteria are used to identify phase types for the PR, SRK, SourPR, and Sour SRK cubic equations of state at supercritical region: 1. If the compressibility factor (Z) is greater than 0.3, and the isothermal compressibility factor (beta) is greater than 0.75, a vapor fraction of 1.0 is assigned to the stream. 2. If Z is greater than 0.75 and the sum of composition of light compounds (NBP<230K) is greater than the sum of composition of heavy compounds, a vapor fraction of 1.0 is assigned to the stream.
- 463. A-80 Flash Calculations A-80 Otherwise, vapor fraction of 0 is assigned to the stream and liquid correlations are used. A.7.8 Solids HYSYS does not check for solid phase formation of pure components within the flash calculations, however, incipient solid formation conditions for CO2 and hydrates can be predicted with the Utility Package. Solid materials such as catalyst or coke can be handled as user- defined, solid type components. The HYSYS property package takes this type of component into account in the calculation of the following stream variables: stream total flow rate and composition (molar, mass and volume), vapour fraction, entropy, enthalpy, specific heat, density, molecular weight, compressibility factor, and the various critical properties. Transport properties are computed on a solids-free basis. Note that solids are always carried in the second liquid phase, i.e., the water rich phase. Solids do not participate in vapour-liquid equilibrium (VLE) calculations. Their vapour pressure is taken as zero. However, since solids do have an enthalpy contribution, they have an effect on heat balance calculations. Thus, while the results of a Temperature flash are the same whether or not such components are present, an Enthalpy flash is affected by the presence of solids. A solid material component is entered as a hypothetical component in HYSYS. For more information on utilities, refer to Chapter 14 - Utilities of the HYSYS Operations Guide. Refer to Chapter 3 - Hypotheticals for more information on Hypotheticals.
- 464. Property Methods & Calculations A-81 A-81 A.7.9 Stream Information When a flash calculation occurs for a stream, the information that is returned depends on the phases present within the stream. The following table shows the stream properties that are calculated for each phase: Steam Property Applicable PhasesA Vapour Phase Mole Fraction F V L S Vapour Phase Mass Fraction F V L S Vapour Phase Volume Fraction F V L S Temperature F V L S Pressure F V L S Flow F V L S Mass Flow F V L S Liquid Volume Flow (Std, Ideal) F V L S Volume Flow F V L S Std. Gas Flow F V L S Std. Volume Flow F L S Energy F V L S Molar Enthalpy F V L S Mass Enthalpy F V L S Molar Entropy F V L S Mass Entropy F V L S Molar Volume F V L S Molar Density F V L S Mass Density F V L S Std. Liquid Mass Density FD L S Molar Heat Capacity F V L S Mass Heat Capacity F V L S CP/CV F V L S Thermal Conductivity FB,D V L Viscosity FB,D V L Kinematic Viscosity FB,D V L Surface Tension FB L Molecular Weight F V L S Z Factor FB V L S Air SG FB V Watson (UOP) K Value F V L S Component Mole Fraction F V L S A Stream phases: F - Feed V - Vapour L - Liquid S - Solid
- 465. A-82 References A-82 B Physical property queries are allowed on the feed phase of single phase streams. C Physical property queries are allowed on the feed phase only for streams containing vapour and/or liquid phases. D Physical property queries are allowed on the feed phase of liquid streams with more than one liquid phase. A.8 References 1 API Publication 955, A New Correlation of NH3, CO2 and H2S Volatility Data From Aqueous Sour Water Systems, March 1978. 2 API Technical Data Book, Petroleum Refining, Fig. 9A1.4, p. 9-15, 5th Edition (1978). 3 Chao, K. D. and Seader, J. D., A.I.Ch.E. Journal, pp. 598-605, December 1961. 4 Ely, J.F. and Hanley, H.J.M., "A Computer Program for the Prediction of Viscosity and Thermal Conductivity in Hydrocarbon Mixtures", NBS Technical Note 1039. 5 Gambill, W.R., Chem. Eng., March 9, 1959. 6 Grayson, H. G. and Streed, G. W., "Vapour-Liquid Equilibria for High Temperature, High Pressure Systems", 6th World Petroleum Congress, West Germany, June 1963. 7 Hankinson, R.W. and Thompson, G.H., A.I.Ch.E. Journal, 25, No. 4, p. 653 (1979). Component Mass Fraction F V L S Component Volume Fraction F V L S Component Molar Flow F V L S Component Mass Flow F V L S Component Volume Flow F V L S K Value (y/x) Lower Heating Value Mass Lower Heating Value Molar Liquid Fraction F V L S Molar Light Liquid Fraction F V L S Molar Heavy Liquid Fraction F V L S Molar Heat of Vapourization FC V L Mass Heat of Vapourization FC V L Partial Pressure of CO2 F V L S Steam Property Applicable PhasesA
- 466. Property Methods & Calculations A-83 A-83 8 Hayden, J.G. and O’Connell, J.P., Ind. Eng. Chem., Process Des. Dev. 14, 209 (1975). 9 Jacobsen, R.T and Stewart, R.B., 1973. "Thermodynamic Properties of Nitrogen Including Liquid and Vapour Phases from 63 K to 2000K with Pressure to 10 000 Bar." J. Phys. Chem. Reference Data, 2: 757-790. 10Kabadi, V.N., and Danner, R.P. A Modified Soave-Redlich-Kwong Equation of State for Water-Hydrocarbon Phase Equilibria, Ind. Eng. Chem. Process Des. Dev. 1985, Volume 24, No. 3, pp 537-541. 11 Keenan, J. H. and Keyes, F. G., Thermodynamic Properties of Steam, Wiley and Sons (1959). 12 Knapp, H., et al., "Vapor-Liquid Equilibria for Mixtures of Low Boiling Substances", Chemistry Data Series Vol. VI, DECHEMA, 1989. 13Passut, C. A.; Danner, R. P., “Development of a Four-Parameter Corresponding States Method: Vapour Pressure Prediction”, Thermodynamics - Data and Correlations, AIChE Symposium Series; p. 30-36, No. 140, Vol. 70. 14 Peng, D. Y. and Robinson, D. B., "A Two Constant Equation of State", I.E.C. Fundamentals, 15, pp. 59-64 (1976). 15 Perry, R. H.; Green, D. W.; “Perry’s Chemical Engineers’ Handbook Sixth Edition”, McGraw-Hill Inc., (1984). 16Prausnitz, J.M., Lichtenthaler, R.N., Azevedo, E.G., "Molecular Thermodynamics of Fluid Phase Equilibria", 2nd. Ed., McGraw-Hill, Inc. 1986. 17 Reid, C.R., Prausnitz, J.M., and Sherwood, T.K., "The Properties of Gases and Liquids", McGraw-Hill Book Company, 1977. 18 Reid, R.C., Prausnitz, J.M., and Poling, B.E., "The Properties of Gases & Liquids", McGraw-Hill, Inc., 1987. 19Soave, G., Chem Engr. Sci., 27, No. 6, p. 1197 (1972). 20 Stryjek, R., Vera, J.H., J. Can. Chem. Eng., 64, p. 334, April 1986. 21 Twu, C.H., I.E.C. Proc Des & Dev, 24, p. 1287 (1985). 22Woelflin, W., "Viscosity of Crude-Oil Emulsions", presented at the spring meeting, Pacific Coast District, Division of Production, Los Angeles, Calif., Mar. 10, 1942. 23 Zudkevitch, D., Joffee, J. "Correlation and Prediction of Vapor-Liquid Equilibria with the Redlich-Kwong Equation of State", AIChE Journal, Volume 16, No. 1, January pp. 112-119.
- 467. A-84 References A-84
- 468. Oil Methods & Correlations B-1 B-1 B Oil Methods & Correlations B.1 Introduction .................................................................................. 2 B.2 Characterization Method................................................................ 2 B.2.1 Generate a Full Set of Working Curves ........................................ 3 B.2.2 Light Ends Analysis...................................................................4 B.2.3 Auto Calculate Light Ends.......................................................... 7 B.2.4 Determine TBP Cutpoint Temperatures........................................ 8 B.2.5 Graphically Determine Component Properties............................... 9 B.2.6 Calculate Component Critical Properties ......................................9 B.2.7 Correlations........................................................................... 10 B.3 References................................................................................... 11
- 469. B-2 Introduction B-2 B.1 Introduction This appendix is a supplement to Chapter 4 - HYSYS Oil Manager. Included in this appendix is the general procedure used by HYSYS to characterize an oil and a list of correlations used in the Oil Manager. B.2 Characterization Method The procedure HYSYS uses to convert your assay data into a series of petroleum hypocomponent involves four major internal characterization steps: 1. Based on your input curves, HYSYS calculates a detailed set of full range Working Curves that include the true boiling point (TBP) temperature, molecular weight, density and viscosity behaviour. 2. Next, by using either a default or user-supplied set of cutpoint temperatures, the corresponding fraction for each hypocomponent is determined from the TBP working curve. 3. The normal boiling point (NBP), molecular weight, density and viscosity of each hypocomponent are graphically determined from the working curves. 4. For each hypocomponent, HYSYS calculates the remaining critical and physical properties from designated correlations, based upon the component's NBP, molecular weight, and density. Knowledge of the four phases of the characterization process provide a better understanding of how your input data influences the final outcome of your characterization. The following sections detail each step of the calculation.
- 470. Oil Methods & Correlations B-3 B-3 B.2.1 Generate a Full Set of Working Curves To ensure accuracy, a true boiling point (TBP) curve and associated molecular weight, density, and viscosity property curves are required for the characterization calculations. HYSYS takes whatever input curves you have supplied, and interpolates and extrapolates them as necessary to complete the range from 0 to 100%. These full range curves are referred to as the working curves. If you supply an ASTM D86, ASTM D1160, or EFV distillation curve as input, it is automatically converted to a TBP distillation curve. On the other hand, if you do not have any distillation data, supplying two of the three bulk properties (molecular weight, density, or Watson (UOP) K factor) allows HYSYS to calculate an average1 TBP distillation curve. Physical property curves that were not supplied are calculated from default correlations designed to model a wide variety of oils, including condensates, crude oils, petroleum fractions, and coal-tar liquids. If you supply a bulk molecular weight or bulk density, the corresponding physical property curve (either user- supplied or generated) is smoothed and adjusted such that the overall property is matched. A typical TBP curve is illustrated below. Figure B.1 Percent Distilled 0 100 Temperature IBP FBP
- 471. B-4 Characterization Method B-4 B.2.2 Light Ends Analysis HYSYS uses your Light Ends data to either define or replace the low boiling portion of your TBP, ASTM D86 or ASTM D1160 curve with discrete pure components. HYSYS does not require that you match the highest boiling point light-end with the lowest boiling point temperature on the TBP curve. Using the sample Light Ends analysis shown here, HYSYS replaces the first portion of the TBP working curve to the assay percentage just past the boiling point of n-pentane (approximately 95°F or 36°C) or 11.3 vol% (the cumulative light ends total), whichever is greater. The new TBP curve would include the Light Ends Free portion of the original sample beginning at 0% distilled with the associated IBP representing the remaining portion of the original sample. Three possible Light Ends/Assay situations can exist as depicted in the next three figures. In the following figures: • Point A represents the boiling point of the heaviest light- end, n-Pentane in this example. • Point B represents the temperature at which the total Light Ends percentage intersects the TBP working curve. Default values of the IBP and FBP can be changed on the Boiling Ranges property view. Refer to Section 4.4 - Oil Characterization Property View for more information.
- 472. Oil Methods & Correlations B-5 B-5 If points A and B coincide exactly as shown in Figure B.2, HYSYS assigns the TBP working curve's IBP equal to the boiling point of the heaviest light end and normalizes the remaining portion of the TBP curve with the light ends removed. All points that lie below point B on the curve are eliminated. Figure B.3 depicts the situation that may arise from inconsistent data or from a poor extrapolation of the IBP. These situations are corrected by assuming that the Light Ends analysis is correct and that the error exists in the internal TBP curve. In the figure, Point A (boiling point of the heaviest light end component) lies below Point B (internal TBP curve temperature associated with your cumulative light ends percentage) on the internal TBP working curve. HYSYS replaces point B (the Light Ends free IBP) by a point that uses the cumulative light ends percentage and the normal boiling point of Figure B.2 Figure B.3 Percent Distilled 0 100 Temperature IBP FBP NBP nC5 Portion of Original Assay that will be Renor-malized to be on a Light Ends Free Basis Cumulative Light Ends % Distilled A B Percent Distilled 0 100 Temperature IBP FBP NBP nC5 Portion of Original Assay that will be Renor-malized to be on a Light Ends Free Basis Cumulative Light Ends % Distilled B A
- 473. B-6 Characterization Method B-6 the heaviest light ends component. The Light Ends free portion of the curve is smoothed before normalizing. Figure B.4 shows the boiling point of the heaviest light-end occurring at an assay percentage greater than the cumulative Light Ends total. HYSYS corrects this situation by successively eliminating TBP working curve points from point B up to the first temperature point greater than the heaviest light end temperature (Point A). For example, if in the above figure Point B represents 5% and Point A represents 7%, the new TBP curve (which is light ends free) is stretched, i.e., what was 93% of the assay (determined from point A) is now 95% of the assay. As in the previous case, Point A's temperature is assigned to the new TBP curve’s IBP, and the Light Ends free portion is smoothed and normalized. Figure B.4 Percent Distilled 0 100 Temperature IBP FBP NBP nC5 Portion of Original Assay that will be Renor-malized to be on a Light Ends Free Basis Cumulative Light Ends % Distilled A B Portion of TBP that is eliminated due to inconsistencies between the Distillation and Light-Ends Analyses
- 474. Oil Methods & Correlations B-7 B-7 B.2.3 Auto Calculate Light Ends HYSYS' Auto Calculate Light Ends procedure internally plots the boiling points of the defined components on the TBP working curve and determines their compositions by interpolation. HYSYS adjusts the total Light Ends fraction such that the boiling point of the heaviest light end is at the centroid volume of the last Light Ends component. The figure below illustrates the Auto Calculate Light Ends removal procedure. Figure B.5 Temperature IBP FBP NBP nC5 nC4 iC5 iC4 0 100 iC4 iC5 nC5 nC4 Percent Distilled Cumulative Light Ends % Distilled Portion of Original Assay that will be Renormalized to be on a Light Ends Free Basis New IBP point for the TBP curve Centroid Volume of the Last Light-End Component
- 475. B-8 Characterization Method B-8 B.2.4 Determine TBP Cutpoint Temperatures You may specify the hypocomponent breakdown by supplying a number of cutpoint temperatures and the corresponding number of cuts for each temperature range, or you may let HYSYS calculate an optimal set of cutpoints for you based upon the overall number of hypocomponent you have designated. The characterization process then uses its TBP working curve and the specified set of TBP cutpoints to determine the fraction of each hypocomponent on the input curve basis. In Figure B.6, four components are generated from the TBP curve using five TBP cutpoints of equal temperature increment. Refer to Section 4.6 - Hypocomponent Generation for more details. Figure B.6 Percent Distilled 0 100 Temperature T4 CUT1 CUT2 CUT3 CUT4 IBP T3 T2 T1
- 476. Oil Methods & Correlations B-9 B-9 B.2.5 Graphically Determine Component Properties After the cutpoints and the fraction of each hypocomponent are known, the average boiling point may be determined. This is the normal boiling point (NBP), which is calculated for each component by equalizing the areas between the TBP curve and a horizontal line representing the NBP temperature. This is shown in the figure below, with the grey areas representing the equalized areas. The average molecular weight, density, and viscosity of each hypocomponent are subsequently calculated from the corresponding smoothed working curves for molecular weight, density and viscosity. B.2.6 Calculate Component Critical Properties Knowing the normal boiling point, molecular weight, and density enables HYSYS to calculate the remaining physical and thermodynamic properties necessary to completely define the petroleum hypocomponent. These properties are estimated for each hypocomponent using default or user-selected correlations as outlined in Section B.2.7 - Correlations. Figure B.7 Temperature T4 IBP T3 T2 T1 Percent Distilled 0 100 CUT1 CUT2 CUT3 CUT4
- 477. B-10 Characterization Method B-10 B.2.7 Correlations The range of applicability for the critical property correlations are explained below: Critical Property Correlation Range of Applicability Lee-Kesler These equations yield nearly identical results to those obtained using the graphical correlations found in the API Data Book for boiling temperatures below 1250°F (677°C). The equations are modified to extend beyond this range, but an upper limit is not given by the authors. Cavett The author does not present any reference as to which data were used for the development of the correlations or their limitations. Experience has proven these correlations to produce very good results for fractions whose API gravity is greater than zero or for highly aromatic and naphthenic fractions such as coal tar liquids. Riazi-Daubert In the boiling point range 0 - 602°F (-18 - 317°C), these correlations perform slightly better than other methods. Their most serious drawback is the limitation of the boiling point to 855°F (457°C) for the calculation of critical pressure and molecular weight. Nokay Limitations for these correlations are not presented in the original publications. The critical temperature and molecular weight correlations are particularly good for highly aromatic or naphthenic systems as shown in a paper by Newman, "Correlations Evaluated for Coal Tar Liquids". Roess The main limitation of these correlations is that they should not be used for fractions heavier than C20 (650°F, 343°C). They highly underestimate critical temperatures for heavier fractions and should not be used for heavy oil applications. Edmister These equations are very accurate for pure components, but are restricted to condensate systems with a limited amount of isomers. Edmister acentric factors tend to be lower than Lee-Kesler values for fractions heavier than C20 (650°F, 343°C). It is recommended that application of the Edmister equation be restricted to the range below C20. Bergman These correlations were developed for lean gases and gas condensates with relatively light fractions, thereby limiting their general applicability to systems with carbon numbers less than C15. Spencer-Daubert This family of correlations is a modification of the original Nokay equations with a slightly extended range of applicability. Rowe These equations were presented for estimating boiling point, critical pressure and critical temperature of paraffin hydrocarbons. Carbon number, which is used as the only correlating variable, limits the range of applicability to lighter paraffinic systems. Standing The data of Matthews, Roland and Katz was used to develop these correlations. Molecular weight and specific gravity are the correlating variables. Although Standing claims the correlations are for C7+ fractions, they appear to be valid for narrower boiling point cuts as well. The correlations should be used with caution for fractions heavier than C25 (841°F, 450°C).
- 478. Oil Methods & Correlations B-11 B-11 B.3 References 1 Whitson, C. H., “Characterizing Hydrocarbon Plus Fractions”, Society of Petroleum Engineers Journal, August 1983. Lyderson These correlations are based on the PNA (Paraffin/Napthene/Aromatic) concept similar to Peng-Robinson PNA. Bergman This method is limited to components whose gravity does not exceed 0.875 because of the form of the PNA equations. Acentric factors for fractions heavier than C20 are considerably higher than those estimated from either the Edmister or Lee-Kesler equation. These correlations are included primarily for completeness and should not be used for fluids containing fractions heavier than C20. Yarborough This method is only for use in the prediction of specific gravity of hydrocarbon components. Carbon number and aromaticity are the correlating variables for this equation. The Yarborough method assumes that the C7+ molecular weight and specific gravity are measured. It also assumes that the mole fractions are measured from chromatographic analysis (paraffin molecular weights are assumed to convert weight to mole fractions). Katz-Firoozabadi These correlations are only available for the prediction of molecular weight and specific gravity. Normal boiling point is the only correlating variable and application should be restricted to hydrocarbons less than C45. Mathur Limitations for these correlations are not published by the author. These equations produce excellent results for highly aromatic mixtures such as coal-tar liquids, but are not rigorously examined for highly paraffinic systems. Penn State These correlations are similar to Riazi-Daubert correlations and should have approximately the same limitations. Aspen These correlations yield results quite close to the Lee-Kesler equations, but tend to produce better results for aromatic systems. Limitations for these equations are not available, but the Lee-Kesler limitations should provide a good guide. Hariu Sage These correlations were developed for estimating molecular weight from boiling point and specific gravity utilizing the Watson Characterization Factor, Kw. It provides reasonable extrapolation to boiling points greater than 1500°F (816°C) and is more accurate than the Lee-Kesler molecular weight correlation. Critical Property Correlation Range of Applicability
- 479. B-12 References B-12
- 480. Amines Property Package C-1 C-1 C Amines Property Package C.1 Amines Property Package .............................................................. 2 C.2 Non-Equilibrium Stage Model......................................................... 5 C.3 Stage Efficiency ............................................................................. 7 C.3.1 Non-Equilibrium Stage Model..................................................... 8 C.4 Equilibrium Solubility..................................................................... 9 C.4.1 Kent & Eisenberg Model ............................................................ 9 C.4.2 Li-Mather Electrolyte Model ..................................................... 13 C.5 Phase Enthalpy ............................................................................ 19 C.6 Simulation of Amine Plant Flowsheets ......................................... 20 C.6.1 Solving the Columns............................................................... 20 C.6.2 Converging the Contactor........................................................ 21 C.6.3 Converging the Regenerator .................................................... 22 C.6.4 Recycle Convergence.............................................................. 22 C.6.5 Operating Conditions .............................................................. 23 C.7 Program Limitations .................................................................... 24 C.7.1 Range of Applicability ............................................................. 24 C.8 References................................................................................... 25
- 481. C-2 Amines Property Package C-2 C.1 Amines Property Package The removal of acid gases such as hydrogen sulphide (H2S) and carbon dioxide (CO2) from process gas streams is often required in natural gas plants and in oil refineries. There are many treating processes available. However, no single process is ideal for all applications. The initial selection of a particular process may be based on feed parameters such as composition, pressure, temperature and the nature of the impurities, as well as product specifications. Final selection is ultimately based on process economics, reliability, versatility and environmental constraints. Clearly the selection procedure is not a trivial matter and any tool that provides a reliable mechanism for process design is highly desirable. Acid gas removal processes using absorption technology and chemical solvents are popular, particularly those using aqueous solutions of alkanolamines. The Amines Property Package is a special property package designed to aid in the modeling of alkanolamine treating units in which H2S and CO2 are removed from gas streams. The Property Package contains data to model the absorption/desorption process where aqueous solutions of single amines - monoethanolamine (MEA), diethanolamine (DEA), methyldiethanolamine (MDEA), triethanolamine (TEA), 2,2'-hydroxy-aminoethylether (DGA), or diisopropanolamine (DIPA) and aqueous solutions of blended amines - MEA/MDEA or DEA/MDEA are used. The Amines Property Package is a special option available for HYSYS. For more information on this option or get information on other HYSYS additions please contact your AspenTech Agent.
- 482. Amines Property Package C-3 C-3 Figure C.1 shows the conventional process configuration for a gas treating system that uses aqueous alkanolamine solutions. The sour gas feed is contacted with amine solution counter- currently in a trayed or packed absorber. Acid gases are absorbed into the solvent that is then heated and fed to the top of the regeneration tower. Stripping steam produced by the reboiler causes the acid gases to desorb from the amine solution as it passes down the column. A condenser provides reflux and the acid gases are recovered overhead as a vapour product. Lean amine solution is cooled and recycled back to the absorber. A partially stripped, semi-lean amine stream may be withdrawn from the regenerator and fed to the absorber in the split-flow modification to the conventional plant flowsheet. A three-phase separator or flash tank may be installed at the outlet of the absorber to permit the recovery of dissolved and entrained hydrocarbons and to reduce the hydrocarbon content of the acid gas product. Figure C.1
- 483. C-4 Amines Property Package C-4 The design of amine treating units involves the selection of the following: • the process configuration • the amine type and concentration • the solution circulation rate • the reboiler heat requirements • the operating pressures and temperatures. The mechanical tray design and the number of stages in the contactor are known to affect the process performance and are particularly important in selective absorption applications. Amine treating units were designed in the past using hand calculations and operating experience. Design conditions were typically chosen within a conservative range to cover the deficiencies in the data used in the hand calculations. Simulation is one means of obtaining values for the key design variables in the process, and is generally used to confirm the initial design obtained by the above methods. Rules-of-thumb do not exist for the design of selective absorption applications since operating experience is limited. Furthermore, the process is generally controlled by reaction kinetics and cannot be designed on the basis of chemical equilibrium alone. The simulation program must be relied upon as a predictive tool in these cases. The AMSIM program uses technology developed by DB Robinson & Associates Ltd. to model the equilibrium solubility of acid gases in aqueous amine solutions. A new nonequilibrium stage model which is based on the stage efficiency concept is used to simulate the performance of contactors and regenerators. A list of reference articles on the research leading to the development of AMSIM can be found at the end of this section. The best data known to exist is used to determine the component properties in the AMSIM databank. Currently HYSYS uses AMSIM version 7.2. AMSIM has also been integrated with COMThermo.
- 484. Amines Property Package C-5 C-5 C.2 Non-Equilibrium Stage Model A non-equilibrium stage model developed to simulate the multi- component multistage mass transfer process encountered in an amine treating unit is used in the Amines Property Package. The generalized stage model shown in Figure C.2 gives the flow geometry and nomenclature for an individual stage in a column. The fundamental concept used is that the rate of absorption/ desorption of acid gases to/from the amine solution must be considered as a mass-transfer rate process. This rate process depends on the equilibrium and kinetic parameters that describe the acid gas/amine system. The model incorporates a modified Murphree-type vapour efficiency to account for the varying mass-transfer rates of individual acid gas components. The acid gas stage efficiencies are, in turn, functions of mass-transfer coefficients and the mechanical design of the tray. The AMSIM models is designed for one amine or two amines. When two amines are selected, the Amines property package expects both amines to have a composition or both amines to be zero. You cannot specify one amine composition to be greater than zero and the other to be equal to zero. It is suggested that instead of specifying one amine to be zero, input a very small composition value for said amine.
- 485. C-6 Non-Equilibrium Stage Model C-6 When the generalized stage model is extended to the multistage case, the resulting column flow geometry and nomenclature is shown in Figure C.2. The resulting set of balance equations that characterize the multistage unit are given in Section C.4 - Equilibrium Solubility. This set of equations must be solved for each column in the flowsheet. A modified Newton-Raphson method is used to solve the rigorous non-linear stage equations simultaneously for temperature, composition and phase rates on each stage in a column. Figure C.2
- 486. Amines Property Package C-7 C-7 C.3 Stage Efficiency The stage efficiency as defined under the Amines property package option is given by: where: = Stage efficiency i = Component number j = Stage number K = Equilibrium ratio V = Molar flow rate of vapour X = Mole fraction in liquid phase Y = Mole fraction in vapour phase The stage efficiency is a function of the kinetic rate constants for the reactions between each acid gas and the amine, the physico-chemical properties of the amine solution, the pressure, temperature and the mechanical tray design variables such as tray diameter, weir height and weir length. You may specify the stage efficiencies or have them calculated in HYSYS. (C.1) If the Amines option is selected, HYSYS always uses stage- component efficiencies. Note that the efficiencies used are only for H2S and C02 components. If the efficiencies are not specified for the column, HYSYS calculates efficiencies based on the tray dimensions specified in the Amines page of the Column property view. If no tray dimensions are specified, HYSYS uses the default tray dimensions to calculate the stage efficiencies. These are real stages, not ideal stages. η Vj SVj + ( )Yj Vj 1 + Yij 1 + – Vj SVj + ( )K1jXij Vj 1 + Yij 1 + – ------------------------------------------------------------------------ - = η
- 487. C-8 Stage Efficiency C-8 C.3.1 Non-Equilibrium Stage Model Overall Material Balance Component Material Balance Energy Balance Equilibrium Relationship Summation Equation (C.2) (C.3) (C.4) (C.5) (C.6) Fj Lj 1 – Lj SLj + ( ) – Vj SVj + ( ) – + 0 = Fjzij Lj 1 – xij 1 – Vj 1 + Yij 1 + Lj SLj + ( )xij – Vj SVj + ( )yij – + + 0 = FjHFj Qj Lj 1 – hj 1 – Vj 1 + Hj 1 + Lj SLj + ( )hj – Vj SVj + ( )Hi – + + + 0 = η ijKijxij Vj SVj + ( ) Vj SVj + ( )yij – 1 η ij – ( )Vj 1 + yij 1 + + 0 = yij 1.0 – ∑ 0 =
- 488. Amines Property Package C-9 C-9 C.4 Equilibrium Solubility C.4.1 Kent & Eisenberg Model A model based on the Kent and Eisenberg approach is used to correlate the equilibrium solubility of acid gases in the amine solutions. The reference articles contain experimental data that were used to validate the solubility model. Additional unpublished data for DEA, MDEA, MEA/MDEA, and DEA/MDEA systems have also been incorporated. Improvements were made to the model to extend the reliable range to mole loadings between 0.0001 and 1.2. A proprietary model was developed to predict the solubility of acid gas mixtures in tertiary amine solutions. Solubilities of inert components such as hydrocarbons are modelled using a Henry's constant adjusted for ionic strength effects. The prediction of equilibrium ratios or K-values involves the simultaneous solution of a set of non-linear equations that describe the chemical and phase equilibria and the electroneutrality and mass balance of the electrolytes in the aqueous phase. These equations are provided below. The model is used to interpolate and extrapolate the available experimental solubility data in the Amines Property Package. For tertiary amines that do not form carbamate, the equations involving that ionic species are eliminated from the model. These equations are shown as follows: Chemical Reactions (C.7) (C.8) (C.9) R1R2NH H2O R1R2NH2 + OH- + ⇔ + R1R2R3N H2O R1R2R3NH+ OH- + ⇔ + R1R2NH CO2 R1R2NCOO- H+ + ⇔ +
- 489. C-10 Equilibrium Solubility C-10 (C.10) (C.11) (C.12) (C.13) (C.14) Equilibrium Relations (C.15) (C.16) (C.17) (C.18) (C.19) (C.20) (C.21) (C.22) Chemical Reactions H2O H+ ⇔ OH- + H2S H+ ⇔ HS- + CO2 H2O + H+ ⇔ HCO3 - + HS- H+ ⇔ S= + HCO3 - H+ ⇔ CO3 = + K1 H+ [ ] R1R2NH [ ] R1R2NH2 + [ ] -------------------------------------- - = K2 H+ [ ] R1R2R3N [ ] R1R2R3NH+ [ ] ---------------------------------------- - = K3 HCO3 - [ ] R1R2NH [ ] R1R2NCOO- [ ] ----------------------------------------------- - = K4 H+ [ ] OH- [ ] H2O [ ] --------------------------- - = K5 H+ [ ] HS- [ ] H2S [ ] -------------------------- = K6 H+ [ ] HCO3 - [ ] CO2 [ ] H2O [ ] -------------------------------- - = K7 H+ [ ] S= [ ] HS- [ ] ---------------------- - = K8 H+ [ ] CO3 = [ ] HCO3 - [ ] ---------------------------- - =
- 490. Amines Property Package C-11 C-11 Phase Equilibria (C.23) (C.24) Charge Balance (C.25) Mass Balance (C.26) (C.27) (C.28) (C.29) yH2SφH2S V P HH2S H2S [ ] = yCO2 φCO2 V P HCO2 CO2 [ ] = H+ [ ] R1R2NH2 + [ ] R1R2R3NH+ [ ] + + OH- [ ] R1R2NCOO- [ ] HCO3 - [ ] HS- [ ] 2 CO3 = [ ] 2 S= [ ] + + + + + = C1 2 amine – , R1R2NH [ ] R1R2NH2 + [ ] R1R2NCOO- [ ] + + = C3 amine – R1R2R3N [ ] R1R2R3NH+ [ ] + = CCO2 C1 2 amine – , C3 amine – + ( )αCO2 CO2 [ ] R1R2NCOO- [ ] HCO3 - [ ] CO3 = [ ] + + + = = CH2S C1 2 amine – , C3 amine – + ( )αH2S H2S [ ] HS- [ ] S= [ ] + + = =
- 491. C-12 Equilibrium Solubility C-12 The fugacity coefficient of the molecular species is calculated by the Peng-Robinson equation of state: where: The temperature-dependent quantity has the following form. The parameters and are substance-dependent and are determined through rigorous regressions against reliable data. For mixtures, equation parameters a and b are estimated by the following mixing rules. (C.30) (C.31) (C.32) (C.33) (C.34) (C.35) p RT v b – ---------- - a T ( ) v v b + ( ) b v b – ( ) + --------------------------------------------- - – = a α 0.45724 ( )R2Tc 2 Pc ⁄ = b 0.07780 ( )RTc Pc ⁄ = α α1 2 ⁄ 1 α1 1 Tr – ( ) α2 1 Tr – ( ) 0.7 Tr – ( ) + + = α1 α2 a i j xixj aiaj ( ) 0.5 1 kij – ( ) ∑ ∑ = b i j xixj bi bj + 2 -------------- - 1 lij – ( ) ∑ ∑ =
- 492. Amines Property Package C-13 C-13 C.4.2 Li-Mather Electrolyte Model The Amines property package is modified to simulate three phase behaviour. For the three phase simulation, the K values from the Peng-Robinson property package were combined with the K values from the Amines LLE and VLE package. The Li-Mather model shows a strong predictive capability over a wide range of temperatures, pressures, acid gas loadings, and amine concentrations. AMSIM is capable of simulating processes with blended solvents made up of any two of six principle amines (MEA, DEA, MDEA, TEA, DGA and DIPA). The framework of the thermodynamic model is based on two types of equilibria: vapour-liquid phase equilibria and liquid- phase chemical equilibria. Phase Equilibria The vapour-liquid equilibria of the molecular species is given by: where: Hi = Henry’s constant P = system pressure xi, yi = mole fraction of molecular specied i in the liquid and gas phase = fugacity coefficient on the gas phase = activity coefficient in the liquid phase (C.36) yiΦi V P Hixiγ i L = Φi V γ i L
- 493. C-14 Equilibrium Solubility C-14 The fugacity coefficient is calculated by the Peng-Robinson equation of state (Peng and Robinson, 1976): Where the parameters are obtained from the EQUI-PHASE EQUI90TM program library. The activity coefficient is calculated by the Clegg-Pitzer equation that is described later in this section. Chemical Equilibria In case of single amine-H2S-CO2-H2O systems, the important chemical dissociation reactions are as follows: The chemical equilibrium constants in the acid gas - amine systems play an important role in the prediction of the equilibrium solubilities of acid gases in the aqueous amine solutions. The equilibrium constant K can be expressed by: (C.37) Chemical Dissociation Reactions (C.38) (C.39) (C.40) (C.41) (C.42) (C.43) (C.44) P RT V b – ----------- - a T ( ) V V b + ( ) b V b – ( ) + ------------------------------------------------ - – = Amine + Amine H + + ⇔ H2S HS - H + + ⇔ CO2 H2O HCO3 - H + + ⇔ + H2O OH - H + + ⇔ HCO3 - CO3 = H + + ⇔ HS - S = H + + ⇔ K Πi xiyi ( ) βi =
- 494. Amines Property Package C-15 C-15 The equilibrium constant is expressed as a function of temperature: Henry’s constant has the same function of temperature as that in equation (C.45). In the liquid phase, there are four molecular species, Amine, H2O, CO2, H2S and seven ionic species, Amine+, HCO3 - , HS- , H+ , OH- , CO3 = , S= for the amine-H2S-CO2-H2O system. In the gas phase, there are only four molecular species, Amine, H2O, CO2 and H2S. The determination of the compositions of all molecular and ionic species in both vapour and liquid phases involves the simultaneous solution of a set of non-linear equations that describe the phase equilibria and chemical equilibria, electroneutrality (charge balance) and mass balance of the electrolytes in the aqueous solution. The Clegg-Pitzer Equation The original Pitzer equation (Pitzer, 1973) did not consider the solvent molecules in the system as interacting particles. Thus it is not suitable for the thermodynamic description of the mixed- solvent systems. In the Clegg-Pitzer model, all the species in the system were considered as interacting particles. The long-range electrostatic term and the short-range hard-sphere-repulsive term deduced from the McMillan-Mayer's statistical osmotic- pressure theory remained unchanged. The excess Gibbs free energy, gex consists of the long-range Debye-Huckel electrostatic interaction term, gDH and the short-range Margules expansions with two- and three-suffix, gs : (C.45) (C.46) (C.47) K ln C1 C2 T C3 T C4T + ln + ⁄ + = g ex g DH g s + = g DH RT --------- 4AxIx ρ ------------- 1 ρIx 1 2 ⁄ + ( ) xcxaBacg αIx 1 2 ⁄ ( ) a ∑ c ∑ + ln =
- 495. C-16 Equilibrium Solubility C-16 where: The expressions of activity coefficient for solvent N and ion M+ are as follows: (C.48) (C.49) g s RT ------ - aijxixj aijkxixjxk k ∑ j ∑ i ∑ + a ∑ c ∑ = g s RT ------ - xI xn FcFaWnca xnxn' Ann'xn' An'nxn + ( ) n "" ∑ n ∑ + a ∑ c ∑ n ∑ = Ann' 2ann' 3an'n + = Ann' 2ann' 3ann'n'' + = Wnca 2wnc 2wna wca – 2unc 2una + + + ( ) 4 ⁄ = wij 2aij 3 2 aiij aijj + ( ) ⁄ + = uij 3 2 aiij aijj – ( ) ⁄ = γ N ln 2AxIx 3 2 ⁄ 1 ρIx 1 2 ⁄ + ------------------------- xcxaBca αIx 1 2 ⁄ – ( ) xI 1 xN – ( ) FcFaWNca xI ′ xn FcFaWnca ′ xn ANnxn 1 2xN – ( ) 2AnNxN 1 xN – ( ) + [ ] 2 ′ ′ xnxn' Ann'xn' An'nxn + ( ) n' ∑ n ∑ – n ∑ + a ∑ c ∑ n ∑ – a ∑ c ∑ + exp a ∑ c ∑ – =
- 496. Amines Property Package C-17 C-17 Where subscripts c, a, n and n’ represent cation, anion and molecular species, respectively. The subscript 2 in equation (C.50) stands for water. the total mole fraction of ions (xI) is given by: The cation and anion fractions Fc and Fa are defined for fully symmetrical electrolyte systems by The mole fraction ionic strength Ix is defined as (C.50) (C.51) (C.52) (C.53) (C.54) γ M + ln zM 2 Ax 2 ρ -- - 1 ρIx 1 2 ⁄ + ( ) Ix 1 2 ⁄ 1 2Ix zM 2 ⁄ – ( ) 1 ρIx 1 2 ⁄ + ----------------------------------------------- - + ln – xaBmag αIx 1 2 ⁄ ( ) xcxaBca zM 2 g αIx 1 2 ⁄ ( ) 2Ix ------------------------------ - 1 zM 2 2Ix ⁄ – ( ) αIx 1 2 ⁄ – ( ) exp + 2 xn FaWnMa xn 1 xI + ( ) FcFaWnca 2 FaW2Ma FcFaW2ca 2 xnxn' Ann'xn' An'nxn + ( ) n' ∑ n ∑ – a ∑ c ∑ + a ∑ – a ∑ c ∑ n ∑ – a ∑ n ∑ + a ∑ c ∑ – a ∑ + = xI 1 xn ∑ – = Fc 2xc xI ⁄ = Fa 2xa xI ⁄ = Ix 1 2 zi 2 xI ∑ ⁄ =
- 497. C-18 Equilibrium Solubility C-18 The function of g(x) is expressed by where: Ax is the Debye-Huckel parameter on a mole fraction basis: where: Ci, Cn = molar concentrations of the ion i and solvent n, respectively I = ionic strength in molar concentration = Debye-Huckel parameter, which is a function of temperature, density and dielectric constant of the mixed solvents = related to the hard-core collision diameter, or distance of closest approach between ions in solution An'n and Ann' = interaction parameters between and among the molecular species, respectively Bca = hard sphere repulsion parameter between ions Wnca = the interaction parameter between ions and between ion and solvent Parameters An'n, Ann', Bca and Wnca share the same function of temperature: (C.55) (C.56) (C.57) g x ( ) 2 1 1 x + ( ) x – ( ) exp – [ ] x 2 ⁄ = x αIx 1 2 ⁄ 2I 1 2 ⁄ = = I 1 2 ⁄ zi 2 Ci ∑ = Ax Aφ Cn ∑ 1 2 ⁄ = Aφ ρ Y a b T ⁄ + =
- 498. Amines Property Package C-19 C-19 The Clegg-Pitzer equations appear to be uncompromisingly long and contain many terms and parameters. However, it should be pointed out that only a few parameters were used and many terms, such as the quaternary terms in the original Clegg-Pitzer equations were omitted in this model. It can be seen that only Ann', An'n, Bca and Wnca appear in the expressions and are treated as adjustable parameters. In this model, both water and amine are treated as solvents. The standard state of each solvent is the pure liquid at the system temperature and pressure. The adopted reference state for ionic and molecular species is the ideal and infinitely dilute aqueous solution. C.5 Phase Enthalpy Vapour phase enthalpy is calculated by the Peng-Robinson equation-of-state which integrates ideal gas heat capacity data from a reference temperature. Liquid phase enthalpy also includes the effect of latent heat of vaporization and heat of reaction. The absorption or desorption of H2S and CO2 in aqueous solutions of alkanolamine involves a heat effect due to the chemical reaction. This heat effect is a function of amine type and concentration, and the mole loadings of acid gases. The heat of solution of acid gases is obtained by differentiating the experimental solubility data using a form of the Gibbs-Helmholtz equation. The heat effect which results from evaporation and condensation of amine and water in both the absorber and regenerator is accounted for through the latent heat term which appears in the calculation of liquid enthalpy. Water content of the sour gas feed can have a dramatic effect on the predicted temperature profile in the absorber and should be considered, particularly at low pressures.
- 499. C-20 Simulation of Amine Plant C-20 C.6 Simulation of Amine Plant Flowsheets The key to solving an amine treating system lies in the simulation of the contactor and the regenerator. In both columns, rigorous non-equilibrium stage efficiency calculations are used. In addition, the contactor efficiency incorporates kinetic reaction and mass transfer parameters. Only the Amines Property Package can effectively simulate this system, and only components included in this package should be used. C.6.1 Solving the Columns Follow these general guidelines: • Ensure that the gas to the Contactor is saturated with water. • Use actual, not ideal, stages. • Change stage efficiencies for CO2 and H2S from their default values of 1.0 to fractions for the regenerator and the initial absorber run. • Use calculated efficiencies for subsequent absorber runs as detailed below. • Change the damping factor from a default value of 1.0 to a fraction as recommended in the following section. This may be necessary to prevent oscillation during convergence.
- 500. Amines Property Package C-21 C-21 C.6.2 Converging the Contactor Convergence is most readily achieved by first solving with estimated efficiencies (suggested values are 0.3 for CO2 and 0.6 for H2S), then requesting calculated efficiencies and restarting the column. To do this, you must first specify three dimensions for each tray: tray diameter, weir length and weir height. Specify these parameters in the Amines page of the Parameters tab in the Column property view. For an existing column, use the actual dimensions. For a design situation (or when the tray dimensions are unknown) use the Tray Sizing utility to estimate these parameters. Input the calculated tray dimensions and select Run. HYSYS will calculate the individual component efficiencies (H2S, CO2) based on the tray dimensions. Only single pass trays can be modeled with the Amines Property Package. If the trays in your column are multipass, you must estimate the dimensions based on a single pass tray. After the tray dimensions are specified, the column is recalculated. Note that efficiencies can be calculated only when using the Amines Property Package. These values apply specifically to CO2 and H2S. Damping factors in the range 0.4 - 0.8 usually give the fastest convergence. Temperatures around the contactor should be as follows: Contactor Stream Temperature Range Feed Gas 65 - 130 °F Lean MEA, DEA, TEA, MDEA 100 - 120 °F Lean DGA 140 °F (lean amine minimum 10 °F > feed gas) Absorber Bottoms 120 - 160 °F
- 501. C-22 Simulation of Amine Plant C-22 C.6.3 Converging the Regenerator As with the Contactor, efficiencies can be either specified by the user, or calculated by the program. For the condenser and reboiler, values of 1.0 must be used. For the remaining trays, efficiencies of 0.15 for CO2 and 0.80 for H2S are suggested initial estimates. The easiest specifications to converge are the stage 1 (condenser) temperature and the reboiler duty. Following is a guideline for typical duties. The reboiler temperature should not exceed 280 F to avoid physical degradation of the amines into corrosive by-products. Regenerators usually converge best with reflux ratio estimates of 0.5 - 3.0 and damping factors of 0.2 - 0.5. C.6.4 Recycle Convergence The remaining unit operations in the flowsheet are straightforward. Note that you need a water makeup stream, as indicated in Figure C.1. Since the lean amine concentration may vary due to water carryover in the product from the vessels, a water makeup is required to maintain a desired concentration. Amine losses in the contactor overhead are usually negligible and the makeup stream replaces any water lost so the amine concentration in the recycle does not change significantly during the recycle convergence. Thus, you can quite easily make an excellent initial estimate for the lean amine recycle. The phase, of course, is liquid and the temperature, pressure, total flow rate Amine Duty, BTU/US Gallon TEA, MDEA 800 DEA 1,000 MEA 1,200 DGA 1,300
- 502. Amines Property Package C-23 C-23 and composition are known. Although the composition of CO2 and H2S is unknown, these sour components have only a very minor impact on the recycle and can initially be specified to be zero in the recycle stream. C.6.5 Operating Conditions The Amines property package contains data for the following alkanolamines and mixtures of alkanolamines. Many different amine system designs can be modelled. However, for both good tower convergence and optimum plant operation, the following guidelines are recommended: * Amine mixtures are assumed to be primarily MDEA. Amine HYSYS Name Monoethanolamine MEA Diethanolamine DEA Triethanolamine TEA Methyldiethanolamine MDEA Diglycolamine DGA Diisopropanolamine DIPA Monoethanolamine/Methyldiethanolamine Blend MEA/MDEA Diethanolamine/Methlydiethanolamine Blend DEA/MDEA Amine Lean Amine Strength Maximum Acid Gas Loading (Moles Acid Gas/ Mole Amine) Weight % CO2 H2S MEA 15 - 20 0.50 0.35 DEA 25 - 35 0.45 0.30 TEA, MDEA 35 - 50 0.30 0.20 DGA 45 - 65 0.50 0.35 DEA/MDEA* 35 - 50 0.45 0.30 MEA/MDEA* 35 - 50 0.45 0.30
- 503. C-24 Program Limitations C-24 C.7 Program Limitations The Amines property package contains correlations of data which restrict its use to certain conditions of pressure, temperature and composition. These limitations are given below. The chemical and physical property data base is restricted to amines and the following components: C.7.1 Range of Applicability The following table displays the equilibrium solubility limitations that should be observed when using this property package. Available Components with Amines Property Package Acid Gases CO2, H2S, COS, CS2 Hydrocarbons CH4 to C12 Olefins C2=, C3=, C4=, C5= Mercaptans M-Mercaptan, E-Mercaptan Non-Hydrocarbons H2, N2, O2, CO, H2O Aromatic C6H6, Toluene, e-C6h6, m-Xylene This method does not allow for the use of any hypotheticals. Amine Alkanolamine Concentration Acid Gas Partial Pressure Temperature Range (Wt%) psia o F MEA 0 - 30 0.00001 - 300 77 - 260 DEA 0 - 50 0.00001 - 300 77 - 260 TEA 0 - 50 0.00001 - 300 77 - 260 MDEA 0 - 50 0.00001 - 300 77 - 260 DGA 50 - 70 0.00001 - 300 77 - 260 DIPA 0 - 40 0.00001 - 300 77 - 260 For amine mixtures, use the values for MDEA (assumed to be the primary amine).
- 504. Amines Property Package C-25 C-25 C.8 References 1 Atwood, K., M.R. Arnold and R.C. Kindrick, "Equilibria for the System, Ethanolamines-Hydrogen Sulfide-Water", Ind. Eng. Chem., 49, 1439-1444, 1957. 2 Austgen, D.M., G.T. Rochelle and C.-C. Chen, "Model of Vapour-Liquid Equilibria for Aqueous Acid Gas Alkanolamine Systems", Ind. Eng. Chem. Res., 03, 543-555, 1991. 3 Bosch, H., "Gas-Liquid Mass Transfer with Parallel Reversible Reactions-III. Absorption of CO2 into Solutions of Blends of Amines", Chem. Eng. Sci., 44, 2745-2750, 1989. 4 Chakravarty, T., "Solubility Calculations for Acid Gases in Amine Blends", Ph.D. Dissertation, Clarkson College, Potsdam, NY, 1985. 5 Danckwerts, P.V., and M.M. Sharma, "The Absorption of Carbon Dioxide into Solutions of Alkalis and Amines", The Chemical Engineer, No.202, CE244-CE279, 1966. 6 Deshmukh, R.D. and A.E. Mather, "A Mathematical Model for Equilibrium Solubility of Hydrogen Sulfide and Carbon Dioxide in Aqueous Alkanolamine Solutions", 7 Chem. Eng. Sci., 36, 355-362, 1981. 8 Dingman, J.C., "How Acid Gas Loadings Affect Physical Properties of MEA Solutions", Pet. Refiner, 42, No.9, 189-191, 1963. 9 Dow Chemical Company, "Alkanolamines Handbook", Dow Chemical International, 1964. 10 Isaacs, E.E., F.D. Otto and A.E. Mather, "Solubility of Mixtures of H2S and CO2 in a Monoethanolamine Solution at Low Partial Pressures", J. Chem. Eng. Data, 25, 118-120, 1980. 11 Jou, F.-Y., A.E. Mather, and F.D. Otto, "Solubility of H2S and CO2 in Aqueous Methyldiethanolamine Solutions", Ind. Eng. Chem. Process Des. Dev., 21, 539-544, 1982. 12Jou, F.-Y., F.D. Otto and A.E. Mather, “Solubility of H2S and CO2 in Triethanolamine Solutions”, Presented at the AIChE Winter National Meeting, Atlanta, Georgia, March 11-14, 1984. 13 Jou, F.-Y., F.D. Otto and A.E. Mather, "Solubility of Mixtures of H2S and CO2 in a Methyldiethanolamine Solution", Paper 140b, Presented at the AIChE Annual Meeting, Miami Beach, Florida, Nov.2-7, 1986.
- 505. C-26 References C-26 14 Jou, F.-Y., A.E. Mather and F.D. Otto, "The Solubility of Mixtures of Hydrogen Sulfide and Carbon Dioxide in Aqueous Methyldiethanolamine Solutions", Submitted to The Canadian Journal of Chemical Engineering, 1992. 15 Kahrim, A. and A.E. Mather, "Enthalpy of Solution of Acid Gases in DEA Solutions", Presented at the 69th AIChE Annual Meeting, Chicago, Illinois, Nov.28-Dec.2, 1976. 16Katz, D.L., D. Cornell, R. Kobayashi, F.H. Poettmann, J.A. Vary, J.R. Elenbaas and C.F. Weinaug, "Handbook of Natural Gas Engineering", McGraw-Hill, New York, 1959. 17 Kent, R.L., and B. Eisenberg, "Better Data for Amine Treating", Hydrocarbon Processing, 55, No.2, 87-90, 1976. 18 Kohl, A.L. and F.C. Riesenfeld, "Gas Purification", 4th Ed., Gulf Publishing Co., Houston, Texas, 1985. 19Lal, D., E.E. Isaacs, A.E. Mather and F.D. Otto, "Equilibrium Solubility of Acid Gases in Diethanolamine and Monoethanolamine Solutions at Low Partial Pressures", Proceedings of the 30th Annual Gas Conditioning Conference, Norman, Oklahoma, March 3-5, 1980. 20 Lawson, J.D., and A.W. Garst, "Gas Sweetening Data:Equilibrium Solubility of Hydrogen Sulfide and Carbon Dioxide in Aqueous Monoethanolamine and Aqueous Diethanolamine Solutions", J. Chem. Eng. Data, 21, 20-30, 1976. 21 Lawson, J.D., and A.W. Garst, "Hydrocarbon Gas Solubility in Sweetening Solutions: Methane and Ethane in Aqueous Monoethanolamine and Diethanolamine", J. Chem Eng. Data, 21, 30-32, 1976. 22Lee, J.I., F.D. Otto, and A.E. Mather, "Solubility of Carbon Dioxide in Aqueous Diethanolamine Solutions at High Pressures", J. Chem. Eng. Data, 17, 465-468, 1972. 23 Lee, J.I., F.D. Otto, and A.E. Mather, "Solubility of Hydrogen Sulfide in Aqueous Diethanolamine Solutions at High Pressures", J. Chem. Eng. Data, 18, 71-73, 1973a. 24 Lee, J.I., F.D. Otto, and A.E. Mather, "Partial Pressures of Hydrogen Sulfide over Aqueous Diethanolamine Solutions", J. Chem. Eng. Data, 18, 420, 1973b. 25Lee, J.I., F.D. Otto, and A.E. Mather, "The Solubility of Mixtures of Carbon Dioxide and Hydrogen Sulphide in Aqueous Diethanolamine Solutions", Can. J. Chem. Eng., 52, 125-127, 1974a.
- 506. Amines Property Package C-27 C-27 26 Lee, J.I., F.D. Otto and A.E. Mather, "The Solubility of H2S and CO2 in Aqueous Monoethanolamine Solutions", Can. J. Chem. Eng., 52, 803-805, 1974b. 27 Lee, J.I., F.D. Otto and A.E. Mather, "Solubility of Mixtures of Carbon Dioxide and Hydrogen Sulfide in 5.0 N Monoethanolamine Solution", J. Chem. Eng. Data, 20, 161-163, 1975. 28Lee, J.I., F.D. Otto and A.E. Mather, "Equilibrium in Hydrogen Sulfide- Monoethanolamine-Water System", J.Chem. Eng. Data, 21, 207- 208, 1976a. 29 Lee, J.I., F.D. Otto and A.E. Mather, "The Measurement and Prediction of the Solubility of Mixtures of Carbon Dioxide and Hydrogen Sulphide in a 2.5 N 30 Monoethanolamine Solution", Can. J. Chem. Eng., 54, 214-219, 1976b. 31Lee, J.I., F.D. Otto and A.E. Mather, "Equilibrium Between Carbon Dioxide and Aqueous Monoethanolamine Solutions", J. Appl. Chem. Biotechnol., 26, 32 541-549, 1976c. 33 Lee, J.I. and A.E. Mather, "Solubility of Hydrogen Sulfide in Water", Ber. Bunsenges z. Phys. Chem., 81, 1020-1023, 1977. 34Mason, D.M. and R.Kao, "Correlation of Vapor-Liquid Equilibria of Aqueous Condensates from Coal Processing" in Thermodynamics of Aqueous Systems with Industrial Applications, S.A. Newman, ed., ACS Symp. Ser., 133, 107-139, 1980. 35 Murzin, V.I., and I.L. Leites, "Partial Pressure of Carbon Dioxide Over Its Dilute Solutions in Aqueous Aminoethanol", Russian J. Phys. Chem., 45, 230-231, 1971. 36 Nasir, P. and A.E. Mather, "The Measurement and Prediction of the Solubility of Acid Gases in. Monoethanolamine Solutions at Low Partial Pressures", Can. J. Chem. Eng., 55, 715-717, 1977. 37Otto, F.D., A.E. Mather, F.-Y. Jou, and D. Lal, "Solubility of Light Hydrocarbons in Gas Treating Solutions", Presented at the AIChE Annual Meeting, Paper 21b, San Francisco, California, November 25-30, 1984. 38 Peng, D.-Y., and D.B. Robinson, "A New Two-Constant Equation of State", Ind. Eng. Chem. Fundam., 15, 59-64, 1976. 39 Rangwala, H.A., B.R. Morrell, A.E. Mather and F.D. Otto, "Absorption of CO2 into Aqueous Tertiary Amine/MEA Solutions", The Canadian Journal of Chemical Engineering, 70, 482-490, 1992.
- 507. C-28 References C-28 40 Tomcej, R.A. and F.D. Otto, "Computer Simulation and Design of Amine Treating Units", Presented at the 32nd Canadian Chemical Engineering Conference, Vancouver, British Columbia, Oct.3-6, 1982. 41 Tomcej, R.A., F.D. Otto and F.W. Nolte, "Computer Simulation of Amine Treating Units", Presented at the 33rd Annual Gas Conditioning Conference, Norman, 42Oklahoma, March 7-9, 1983. 43 Tomcej, R.A., "Simulation of Amine Treating Units Using Personal Computers", Presented at the 35th Canadian Chemical Engineering Conference, Calgary, Alberta, Oct.5-8, 1985. 44 Tomcej, R.A. and F.D. Otto, "Improved Design of Amine Treating Units by Simulation using Personal Computers", Presented at the World Congress III of Chemical Engineering, Tokyo, Japan, September 21-25, 1986. 45Tomcej, R.A., D. Lal, H.A. Rangwala and F.D. Otto, "Absorption of Carbon Dioxide into Aqueous Solutions of Methyldiethanolamine", Presented at the AIChE Annual Meeting, Miami Beach, Florida, Nov.2-7, 1986. 46 Tomcej, R.A., F.D. Otto, H.A. Rangwala and B.R. Morrell, "Tray Design for Selective Absorption", Presented at the 37th Annual Laurance Reid Gas Conditioning Conference, Norman, Oklahoma, March 2-4, 1987. 47 Union Carbide Corporation, "Gas Treating Chemicals", Union Carbide Petroleum Processing, Chemicals and Additives, 1969. 48Versteeg, G.F., J.A.M. Kuipers, F.P.H. Van Beckum and W.P.M. Van Swaaij, "Mass Transfer with Complex Reversible Chemical Reactions - I. Single Reversible Chemical Reaction", Chem. Eng. Sci., 44, 2295-2310, 1989. 49 Winkelman, J.G.M., S.J. Brodsky and A.A.C.M. Beenackers, "Effects of Unequal Diffusivities on Enhancement Factors of Reversible Reactions: Numerical Solutions and Comparison with Decoursey's Method", Chem. Eng. Sci., 47, 485-489, 1992. 50 Zhang, Dan D., Gordon X. Zhao, H.-J. Ng, Y.-G. Li and X.-C. Zhao, “An Electrolyte Model for Amine Based Gas Sweetening Process Simulation”, Preceeding of the 78th GPA Annual Convention, p25, 1999. 51Zhange, Dan D., H.-J. Ng and Ray Vledman, “Modeling of Acid Gas Treating Using AGR Physical Solvent”, Proceeding of the 78th GPA Annual Convention, p62, 1999.
- 508. Glycol Property Package D-1 D-1 D Glycol Property Package D.1 Introduction .................................................................................. 2 D.2 Pure Component Vapor Pressure ................................................... 4 D.3 Mixing Rules .................................................................................. 4 D.3.1 TST Mixing Rules ..................................................................... 4 D.3.2 Zero-Pressure CEOS/AE Mixing Rules.......................................... 7 D.3.3 Liquid GE Model..................................................................... 11 D.4 Phase Equilibrium Prediction....................................................... 12 D.5 Enthalpy/Entropy Calculations .................................................... 13 D.6 References................................................................................... 13
- 509. D-2 Introduction D-2 D.1 Introduction In the gas processing industry, it is necessary to dehydrate/ remove water vapour present in the natural gas stream. In nature, impurities like water vapor are mixed in the natural gas. Water vapor in the gas stream can cause the following problems: • Hydrate formation, at low temperature conditions, that can plug valves and fittings in gas pipelines. • React with hydrogen sulfide or carbon dioxide to form weak acids that can corrode gas pipelines. The standard method to remove water vapor from natural gas stream is to use triethylene glycol (TEG) to absorb the water. HYSYS provides the Glycol property package for use in modeling glycol dehydration process using TEG. This property package is based on the TST (Twu-Sim-Tassone) equation of state. The property package contains the necessary pure component and binary interaction parameters for components commonly encountered in natural gas dehydration process. The property package is tuned to represent accurately, the phase behaviour of these components, especially that for the TEG-water binary system. The TST equation of state can accurately predict: • activity coefficients of the TEG-water solutions within the average absolute deviation of 2% • dew point temperatures within an average error of • water content of gas within the average absolute deviation of 1% The Glycol property package should be applicable over the range of temperatures, pressures, and component concentration encountered in a typical TEG-water dehydration system: between 15°C to 50°C and between 10 atm to 100 atm for the gas dehydrator, and between 202°C to 206°C and 1.2 atmospheres for the glycol regenerator. 1° C ±
- 510. Glycol Property Package D-3 D-3 The table below displays the prediction of equilibrium water content in lbH2O/MMSCF for a gas stream in contact with 99.5 weight percent TEG, using the Glycol property package. The figure below displays the predicted equilibrium water dew point vs. contact temperature at various TEG concentrations in weight %. The BIP databank for the Glycol property package will be updated in future releases of HYSYS. Currently, there may be The accuracy of predicted solubility of hydrocarbons in aqueous phase is expected to be within the experimental uncertainty. T dew (K) Reported by: Predicted from TST (EOS): McKetta2 Bukacek1 Water Content Pressure (Pa) 277.59 390 396 393 838 266.48 170 176 174 370 255.37 70 72 71 151 244.26 28 27 26 56.1 233.15 9.2 9.1 9 18.7 222.04 2.4 2.8 2.6 6 Figure D.1
- 511. D-4 Pure Component Vapor Pressure D-4 some limitations or missing BIP for certain component pairs. For example, heavy hydrocarbons or hypothetical components which may not have any interaction parameters available. For assitance in using this property package, please contact Technical Support. D.2 Pure Component Vapor Pressure For the Glycol property package, three alpha function parameters are used to correlate the vapor pressure of the component in the HYSYS component database. The alpha function parameters are: • L in Equation (D.6) • M in Equation (D.6) • N in Equation (D.6) D.3 Mixing Rules For Glycol property package, three adjustable parameters are used to correlate Vapor-Liquid-Equilibrium (VLE) mixture data. The parameters corresponding to the TST (Twu-Sim-Tassone) AE mixing rules are: binary interaction parameters in Equations (D.30) and (D.31). D.3.1 TST Mixing Rules The TST (Twu et al. 20025 ) cubic equations of state is: where: a, b = parameters values that correspond to the critical temperature of the component (D.1) Aij Aji αij , , , P RT v b – ---------- - a v 3b + ( ) v 0.5b – ( ) -------------------------------------------- - – =
- 512. Glycol Property Package D-5 D-5 The critical temperature are found by setting the first and second derivatives of pressure with respect to volume to zero at the critical point: where: c = indicates the variable at the critical point The parameter a is a function of temperature. The value of a(T) at temperatures other than the critical temperature is calculated using the following equation: where: = function of the reduced temperature • For vapor pressure prediction, the Twu correlation (Twu et al., 19913 ) is used: (D.2) (D.3) (D.4) (D.5) where: L,M,N = parameters that are unique for each component (D.6) ac 0.470507R 2Tc 2 Pc ----- = bc 0.0740740R Tc Pc ----- = Zc 0.296296 = a T ( ) α T ( )ac = α T ( ) Tr T Tc ⁄ = α T ( ) α T ( ) Tr N M 1 – ( ) e L 1 Tr NM – ( ) =
- 513. D-6 Mixing Rules D-6 • For non-library components, the generalized alpha function, , is expressed as a function of two variables: the reduced temperature and the acentric factor. • For non-library and petroleum fractions, the generalized alpha function, , is: Each is a function of the reduced temperature only. where: L,M,N = databank values corresponding to subcritical and supercritical conditions For : (D.7) where: = corresponds to = corresponds to (D.8) (D.9) (D.10) L 0.196545 0.704001 M 0.906437 0.790407 N 1.26251 2.13086 α T ( ) α α Tr ω , ( ) = α T ( ) α α 0 ( ) ω α 1 ( ) α 0 ( ) – ( ) + = α 0 ( ) ω 0 = α 1 ( ) ω 1 = α α 0 ( ) Tr N 0 ( ) M 0 ( ) 1 – ( ) e L 1 Tr NM 0 ( ) – = α 1 ( ) Tr N 1 ( ) M 1 ( ) 1 – ( ) e L 1 Tr NM 1 ( ) – = Tr 1 ≤ α 0 ( ) α 1 ( )
- 514. Glycol Property Package D-7 D-7 For : D.3.2 Zero-Pressure CEOS/AE Mixing Rules The zero-pressure mixing rules for the cubic equation of state mixture a and b parameters are as given: where: = equation of state a and b parameters which are evaluated from the van der Waals mixing rule = excess Helmholtz energies at zero pressure = function of reduced liquid volume at zero pressure L 0.358826 0.0206444 M 4.23478 1.22942 N -0.200000 -8.00000 (D.11) (D.12) The mixing rules given by Equations (D.11) and (D.12) are volume-dependent through . (D.13) Tr 1 > α 0 ( ) α 1 ( ) a∗ b∗ avdw ∗ bvdw ∗ ------------- - 1 Cv0 ------- - A0 E RT ------ - A0vdw E RT -------------- bvdw b ---------- - ln – – + = b∗ bvdw ∗ avdw ∗ – 1 avdw ∗ bvdw ∗ -------------- 1 Cv0 ------- - A0 E RT ------ - A0vdw E RT -------------- bvdw b ---------- - ln – – + – ---------------------------------------------------------------------------------------------------------- - = avdw bvdw , A0 E A0vdw E , Cv0 Cv0 v0 ∗ v0 b ⁄ = Cv0 1 w u – ( ) ----------------- – v0 ∗ w + v0 ∗ u + ------------------ vdw ln =
- 515. D-8 Mixing Rules D-8 = zero pressure liquid volume is calculated from the cubic equation of state using the van der Waals mixing rule for its a and b parameters by setting pressure equal to zero and selecting the smallest root: The mixing rule for the parameter b as given by Equation (D.12) forces the mixing rule to satisfy the quadratic composition dependence of the second virial coefficient. Alternatively, the conventional linear mixing rule could be chosen for the b parameter, in other words, ignoring the second virial coefficient boundary condition. To omit the need for the calculation of from the equation of state, the zero-pressure liquid volume of the van der Waals fluid, , is made a constant, r. Thus Equation (D.13) becomes: where: = constant replacing and signifies that is no longer a density dependent function (D.14) Equation (D.14) has a root as long as: (D.15) (D.16) (D.17) v0 ∗ vdw v0 ∗ 1 2 -- - a∗ b∗ ----- - u w – – u w a∗ b∗ ----- - – + 2 4 uw a∗ b∗ ----- - + – 1 2 -- - – = a∗ b∗ ----- - 2 u w + + ( ) 2 u 1 + ( ) w 1 + ( ) + ≥ b xixj 1 2 -- - bi bj + ( ) j ∑ i ∑ = v0 ∗ v0 ∗ vdw Cr 1 w u – ( ) ----------------- – r w + r u + ----------- - ln = Cr Cv0 Cr
- 516. Glycol Property Package D-9 D-9 Thus Equations (D.11) and (D.12) become: is derived from the equation of state by assuming a fixed reduced liquid molar volume r for a van der Waals fluid at zero pressure: where: = equation of state a and b parameters which are evaluated from the conventional van der Waals mixing rules The excess Helmholtz energy is much less pressure-dependent than the excess Gibbs energy. Therefore, the excess Helmholtz energy of the van der Waals fluid at zero pressure can be approximated by the excess Helmholtz energy of van der Waals fluid at infinite pressure. (D.18) (D.19) (D.20) (D.21) (D.22) a∗ b∗ avdw ∗ bvdw ∗ ------------- - 1 Cr ----- - A0 E RT ------ - A0vdw E RT -------------- bvdw b ---------- - ln – – + = b∗ bvdw ∗ avdw ∗ – 1 avdw ∗ bvdw ∗ -------------- 1 Cr ----- - A0 E RT ------ - A0vdw E RT -------------- bvdw b ---------- - ln – – + – -------------------------------------------------------------------------------------------------------- - = A0vdw E A0vdw E RT ------------- - xi bi bvdw ---------- - ln Cr avdw ∗ bvdw ∗ ------------- - xi ai ∗ bi ∗ ------- i ∑ – + i ∑ = avdw bvdw , avdw xixj aiaj 1 kij – ( ) j ∑ i ∑ = bvdw xixj 1 2 -- - bi bj + ( ) j ∑ i ∑ =
- 517. D-10 Mixing Rules D-10 where: = constant For algebraic simplicity, the following development is limited to a binary mixture, in order to obtain the following expression for the excess Helmholtz energy of a van der Waals fluid from Equation (D.23): where: = characteristic parameter of interaction between molecules 1 and 2 Extending these relations to a multi-component mixture,Equations (D.24) and (D.25) become: (D.23) (D.24) (D.25) (D.26) (D.27) (D.28) A0vdw E RT ------------- - A∞ vdw E RT ------------- - C1 avdw ∗ bvdw ∗ ------------- - xi ai ∗ bi ∗ ------- i ∑ – = = C1 1 w u – ( ) ----------------- 1 w + 1 u + ------------ - ln – = A0vdw E RT ------------- - x1x2b1b2δ12 x1b1 x2b2 + ( ) -------------------------------- - = δ12 δ12 C1 RT ------ - a1 b1 --------- a2 b2 --------- – 2 2k12 a1 b1 --------- a2 b2 --------- + – = A0vdw E RT ------------- - 1 2 -- - bδij ( )ΦiΦj j ∑ i ∑ = δij C1 RT ------ - ai bi ------- - aj bj -------- – 2 2kij ai bi -------- aj bj ------- - + – = Φi xibi b -------- - =
- 518. Glycol Property Package D-11 D-11 D.3.3 Liquid GE Model A general multi-component equation for a liquid activity model is now proposed for incorporation in the zero-pressure mixing rules as: Equation (D.29) is similar to the NRTL equation but not the same. The NRTL assumes are the parameters of the model, but the excess Gibbs energy model assumes are the binary interaction parameters. For example, to obtain the NRTL model, are calculated from the NRTL parameters : Equation (D.29) can recover the conventional van der Waals mixing rules when the following expressions are used for : The above two equations are expressed in terms of the cubic equation of state parameters, and the binary interaction parameter . (D.29) (D.30) (D.31) (D.32) (D.33) G E RT ------ - xi xjτ jiGji j n ∑ xkGki k n ∑ ---------------------- - i n ∑ = Aij Aji αij , , τ ij Gij , τ ij Gij , Aij Aji αij , , τ ji Aji T ------ = Gji αji – τ ji ( ) exp = τ ij Gij , τ ji 1 2 -- -δijbi = Gji bj bi --- - = ai bi , kij
- 519. D-12 Phase Equilibrium Prediction D-12 By substituting Equations (D.32) and (D.33) into Equation (D.29), Equation (D.26) is obtained. Subsequently, the mixing rules, Equations (D.18) and (D.16), are reduced to the classical van der Waals one-fluid mixing rules. D.4 Phase Equilibrium Prediction The following equations are the TST (Twu-Sim-Tassone) zero pressure mixing rules used for phase equilibrium prediction in the Glycol property package: (D.1) (D.16) (D.18) (D.23) (D.29) P RT v b – ---------- - a v 3b + ( ) v 0.5b – ( ) -------------------------------------------- - – = b xixj 1 2 -- - bi bj + ( ) j ∑ i ∑ = a∗ b∗ avdw ∗ bvdw ∗ ------------- - 1 Cr ----- - A0 E RT ------ - A0vdw E RT -------------- bvdw b ---------- - ln – – + = A0vdw E RT ------------- - A∞ vdw E RT ------------- - C1 avdw ∗ bvdw ∗ ------------- - xi ai ∗ bi ∗ ------- i ∑ – = = G E RT ------ - xi xjτ jiGji j n ∑ xkGki k n ∑ ---------------------- - i n ∑ =
- 520. Glycol Property Package D-13 D-13 D.5 Enthalpy/Entropy Calculations The Glycol property package uses the Cavett model for enthalpy and entropy calculations. D.6 References 1 Bukacek, R.F., “Equilibrium Moisture Content of Natural Gases”, Research Bulletin 8, Institute of Gas Technology, Chicago, IL, 1955. 2 McKetta, J.J. and Wehe, A.H., cited by GPA Engineering Data Book, Fig. 15-10, Ninth Edition, Fourth Revision, Gas Processors Suppliers Associations, Tulsa, OK, 1979. 3 Twu, C.H., Bluck, D., Cunningham, J.R., and Coon, J.E., “A Cubic Equation of State with a New Alpha Function and a New Mixing Rule”, Fluid Phase Equilib. 1991, 69, 33-50. 4 Twu, C.H., Tassone, V., Sim, D.W., and Watanasiri, S., “Advanced Equation of State Method for Modeling TEG-Water for Glycol Gas Dehydration”, Fluid Phase Equilibria, 2005 (in press). 5 Twu, C.H., Sim, W.D., and Tassone, V., “A Versatile Liquid Activity Model for SRK, PR, and A New Cubic Equation of State TST”, Fluid Phase Equilibria, 2002, 194-197, 385-399.
- 521. D-14 References D-14
- 522. I-1 Index A Activity Models 2-10, A-6, A-18 See models - Chien Null, Margules, NRTL, NRTL Options, UNIQUAC, van Laar, and Wilson additional specifications 2-20, 2-97 binary interaction parameters 2-48, 2- 104 choosing vapour phase model 2-20, A-20, A-39 departure calculations A-52 estimating interaction parameters 2-49 immiscible liquid phases A-23 Amines Property Package 2-13, A-46 Antoine modified vapour pressure model A-43 parameters tab 2-40 vapour pressure model 2-12, 2-90 ASME Steam A-48 property package 2-13 Assay and Blend Association 4-86 Assay Data general guidelines 4-37 no distillation data available 4-32, 4-35 physical properties 4-28 standard input 4-32 Assays characterizing 4-14, 4-17 correlations 4-55 inputting 4-20 light ends 4-38 analysis B-4 auto calculating 4-42, B-7 included 4-39 inputting 4-41 light ends free 4-40 notes 4-58 plotting 4-54 selecting 4-61 types of 4-53 user curves 4-57 working curves 4-53 ASTM D1160. See Laboratory Assay Procedures ASTM D2887. See Laboratory Assay Procedures ASTM D86. See Laboratory Assay Procedures Auto Cut 4-65 B Basis Environment 1-viii Basis Manager component maps tab 6-2 fluid package tab 2-3 hypotheticals tab 3-4 oil manager tab 4-10 reactions tab 5-3 user properties tab 7-3 Blends auto cutting 4-65 bulk data 4-62 composite plots 4-74 correlations 4-68 cut ranges 4-62 distribution plots 4-73 information 4-70 notes 4-76 oil distributions 4-71 plots summary 4-75 property plots 4-71 Braun K10 2-12, 2-90, A-44 Bubble Point A-75 Bulk Properties 4-28 BWR Equation A-12 C Cavett Correlation A-52 Chao Seader A-6–A-7, A-41 models 2-12, 2-90 parameters tab 2-39 semi-empirical method 2-12, 2-90 Chien Null A-20, A-24 activity model 2-11 parameters tab 2-36, 2-98 Chromatographic Analysis. See Laboratory Assay Procedures Chromatographic Assay Input 4-34 Coal Analysis 3-38 Collection (Component Maps) 6-2 Component List Selection 2-25, 2-95 Component Selection 1-13 family filter 1-12 family type filter 1-12 filter options 1-12 general procedure 1-9 property package filter 1-12 tips 1-8
- 523. I-2 I-2 warning messages 2-25 Components adding 1-5 cloning. See Hypotheticals, cloning library components creating custom. See Hypotheticals, adding filtering 1-9 hypotheticals quick access 1-28 incompatible 2-27 manager 1-2 mapping 6-2 master component list 1-2 name format 1-8, 1-10 non recommended 2-26 parameters tab 2-28, 2-98 removing 1-6, 1-14 selected components group 1-6 selection 1-8, 1-13 sorting 1-7, 1-16 substituting 1-6, 1-15 synonyms 1-8 transferring 1-13 viewing 1-7, 1-17 Components Manager 1-2 Conversion Reactions 5-6, 5-8–5-11 rank 5-41 Correlations assay 4-55 blend 4-68 critical property B-10 oil characterization 4-81 Cubic EOS mixing rules D-7 Cut 4-62 Cut/Blend. See Blends or Oil Characterzation Cutpoint B-8 D D86 Interconversion Methods 4-16 D86. See Laboratory Assay Procedures Density.See Liquid Density or Vapour Density Dew Point A-74 E EFV (Equilibrium Flash Vapourization). See Laboratory Assay Procedures Eley-Rideal Model 5-26 Enthalpy Basis A-50 tabular 2-73 Enthalpy Departure Calculations A-50 Enthalpy Flash A-76 Entropy Flash A-76 Equations of State (EOS) 2-9, A-9 additional information 2-14, 2-97 departure calculation A-50 enthalpy calculation A-16 interaction parameters 2-47, 2-101 See models - GCEOS, Kabadi Danner, Lee-Kesler Plocker, Peng Robinson, PRSV, Peng Robinson Options, SRK, SRK Options, Zudkevitch Joffee. TST CEOS D-4 Equilibrium Reactions 5-6, 5-12–5-18 fractional approach 5-17 temperature approach 5-17 Esso Tabular A-45 vapour pressure model 2-12, 2-90 Extended NRTL. See NRTL Options F Flash Calculations A-72 handling water A-77 temperature-pressure (TP) A-73 vapour fraction A-74 Flow Rate actual gas A-71 actual volume A-70 as a specification A-71 available A-66 densities, liquid and vapour A-67 liquid volume A-70 mass A-69 molar A-69 standard gas A-70 standard liquid volume A-70 volumetric A-66 Fluid Package activity models 2-10 adding 2-3 adding - quick start 2-5 adding notes 2-83 advantages 2-2 associated flowsheet 2-4 base property selection 2-9 copy 2-4 delete 2-4
- 524. I-3 I-3 equations of state 2-9 export 2-4 import 2-4 property package selection 2-8 property view 2-7, 2-84 reactions 2-57 stability test 2-53, 2-107 tabular 2-58 See also Tabular Package Fugacity Coefficients A-56 G GCEOS binary coeffs tab 2-41 Generalized Cubic Equation of State 2-10 Generalized Cubic Equations of State 2-28 interaction parameters 2-41 parameters tab 2-28 General NRTL. See NRTL Options Glycol Property Package D-2 enthalpy calculation D-13 entropy calculation D-13 liquid activity model D-11 mixing rules D-4 phase equilibrium prediction D-12 pure component vapor pressure D-4 Grayson Streed A-6–A-7, A-41 parameters tab 2-39 semi-empirical method 2-12, 2-90 H Henry's Law A-36 Heterogeneous Catalytic Reactions 5-7, 5-25– 5-31 Eley-Rideal 5-26 Langmuir-Hinshelwood 5-26 Mars-van Krevelen Model 5-26 Hypothetical Components. See Hypotheticals Hypothetical Group controls 3-14 creating 3-4, 3-13 deleting 3-4 exporting 3-5 group name 3-14 importing 3-5 moving 3-45 moving between 3-5 viewing 3-4, 3-44 Hypotheticals adding 1-28, 3-15 adding a hypothetical - quick start 3-5 adding hypothetical group 1-28 base properties 3-16 cloning library components 3-5, 3-14, 3- 42 critical properties 3-29 deleting 3-15 estimating properties 3-14, 3-30 estimation methods 3-14, 3-18 individual controls 3-15 minimum information required 3-18 moving 3-5 property view 3-26 quick reference 3-5 solid hypotheticals 3-15, 3-36 temperature dependent properties 3-32 UNIFAC structure builder 3-15, 3-23 vapour pressure properties 3-17 viewing 3-5, 3-15 viewing group. See Hypothetical Group, viewing I Ideal Gas Law A-39 departure calculations A-53 Installing oils 4-14 reaction set 5-44 Interaction Parameters activity models 2-48, 2-104, A-21 equations of state 2-47, 2-101 estimating A-17 Henry’s Law A-37 K K/ln(K) Equilibrium Constant 5-15 Kabadi Danner A-9, A-11 equation of state 2-10 parameters tab 2-35 Kinetic Reactions 5-19–5-25 requirements 5-7 L Laboratory Assay Procedures ASTM D1160 4-6, 4-31 ASTM D2887 4-6, 4-31 ASTM D86 4-6, 4-31 ASTM D86 and D1160 4-31
- 525. I-4 I-4 chromatographic analysis 4-6, 4-31 assay input 4-34 D2887 interconversion method 4-16 D86 interconversion method 4-16 equilibrium flash vapourization 4-6, 4-32 preparation 4-39 TBP analysis 4-5, 4-31 Langmuir-Hinshelwood Model 5-26 Lee Kesler Plocker 2-10, A-9, A-11 Lee-Kesler Enthalpy A-17, A-41, A-54 Liquid Density A-58 actual A-68 ideal A-68 standard A-68 M Mapping collection 6-2 components 6-1 target 6-2 transfer options 6-5 Margules A-20, A-28 activity model 2-11 Mars-van Krevelen Model 5-26 MBWR A-48 property package 2-13 N NBS Steam A-48 property package 2-13 NRTL (Non Random Two Liquid) A-20, A-23, A-29 activity model 2-11 NRTL Options A-23 Extended NRTL 2-11, A-27 General NRTL 2-11, A-27 O Oil Characterization analysis methods. See Laboratory Assay Procedures bulk blending data 4-62 component critical properties B-9 composite plots 4-74 correlations 4-9, 4-14, 4-55, 4-81 cutting/blending 4-14, 4-59 deleting 4-15 density curves 4-47 determining TBP cutpoints B-8 distribution plots 4-73 FBP 4-15 IBP 4-15 installing oil 4-87 laboratory data corrections 4-8 light ends 4-38–4-39, 4-41, B-4 method B-2 molecular weight curves 4-46 notes 4-86 output settings 4-15 physical property curves 4-8, 4-34 procedure 4-9 property plots 4-71 property view 4-14 purpose 4-3 user properties 4-14, 4-76 viscosity curves 4-48 working curves 4-53 P Peng Robinson A-5–A-6, A-10 departure calculations A-50 equation of state 2-10 fugacity coefficient A-57 modelling vapour phase A-39 Peng Robinson Options A-9 PRSV 2-10 Sour PR 2-10, A-15 Physical Properties A-57 Poynting Correction 2-21, A-21 PPDS 2-68, 2-70 Property Package selecting a A-4 Property Packages See Amines Property Package, Braun K10, Chao Seader, Esso Tabular, Grayson Streed, Lee Kesler Plocker, Margules, MBWR, PRSV, Peng Robinson, Peng Robinson Options, SRK, SRK Options, Steam Packages, UNIQUAC, van Laar and Wilson. PRSV (Peng Robinson Stryjek Vera) A-6, A-13 equation of state 2-10 parameters tab 2-35 Pseudo Component Generation 4-59 Q Quality Pressure A-75
- 526. I-5 I-5 R Reaction Package adding 5-45 Reaction Rank 5-41 Reaction Sets 5-35 adding 5-36 adding to fluid package 5-36, 5-44 advanced features 5-39 attaching to unit operations 5-44 copying 5-36 deleting 5-36 exporting 5-36, 5-43 importing 5-36, 5-43 quick access 2-58 solver method 5-38 viewing 5-36 Reactions activating 5-38 adding 5-7 components 5-3–5-4 conversion. See Conversion Reactions copying 5-7 deactivating 5-38 deleting 5-7 equilibrium. See Equilibrium Reactions heterogeneous catalytic. See Heterogeneous Catalytic Reactions kinetic. See Kinetic Reactions library reactions 5-5 quick start 5-47 selecting components 5-3–5-4 sets. See Reaction Sets simple rate. See Simple Rate Reactions thermodynamic consistency 5-21 viewing 5-7 Redlich Kwong (RK) A-39 departure calculations A-54 S Simple Rate Reactions 5-32–5-35 requirements 5-7 Solids A-80 Sour PR. See Peng Robinson Options Sour SRK. See SRK Options Sour Water Options A-15 See SRK Options and Peng Robinson Options SRK (Soave Redlich Kwong) A-5–A-6, A-9–A- 10 departure calculations A-51 equation of state 2-10 fugacity coefficient A-56 modelling vapour phase A-39 SRK Options A-9 See Kabadi Danner and Zudkevitch Joffee Sour SRK 2-10, A-15 Stability Test 2-50, 2-105 parameters 2-53, 2-107 Steam Packages A-48 See ASME Steam and NBS Steam Stream Information A-81 Surface Tension A-65 T Tabular Package 2-58 active properties selection 2-66 data 2-67 enthalpy basis 2-73 library 2-68, 2-70 plotting 2-70 regression 2-74 requirements 2-60 supplying data 2-73 using 2-62 viewing selection 2-70 Target (Component Maps) 6-2 TEG D-2 Thermal Conductivity A-62 Transport Properties A-57 triethylene glycol D-2 TST mixing rules D-4 U UNIFAC LLE interaction parameter estimation 2-49 UNIFAC Property Estimation A-22 UNIFAC Structure Builder 3-23 UNIFAC VLE interaction parameter estimation 2-49 UNIQUAC (Universal Quasi Chemical Parameters) 2-11, A-20, A-31 User Points 4-65 User Properties 4-57, 4-76, 7-2–7-9 adding 7-3 deleting 7-3
- 527. I-6 I-6 mixing rules 7-7 notes 7-9 viewing 7-3 User Ranges 4-66 V van Laar A-20, A-33 activity model 2-11 Vapour Density A-59 Vapour Pressure A-75 Vapour Pressure Models 2-12, A-7, A-42 Antoine 2-12, 2-90 Braun K10 2-12, 2-90 Esso Tabular 2-12, 2-90 Virial Equation A-21 departure calculations A-54 modelling vapour phase A-40 Viscosity A-59 liquid phase mixing rules A-61 W Water A-77 Wilson 2-11, A-20, A-34 parameters tab 2-39 Working Curves B-3 Z Zudkevitch Joffee A-9, A-16 equation of state 2-10 parameters tab 2-36