Assessing web site usability measurement

IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
__________________________________________________________________________________________
Volume: 02 Issue: 09 | Sep-2013, Available @ http://www.ijret.org 386
ASSESSING WEB SITE USABILITY MEASUREMENT
Nur Sukinah Aziz1
, Adzhar Kamaludin2
, Norrozila Sulaiman3
1
Faculty of Computer, Media and Technology Management, TATI University College, Kemaman, Terengganu, Malaysia
2,3
Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang, Kuantan, Pahang, Malaysia
nursukinah@tatiuc.edu.my, adzhar@ump.edu.my, norrozila@ump.edu.my
Abstract
Web evaluation has been used in decade to validate the web site to see how it performs. When analysing a web site, typical factors to
be considered are the way the information is organized and presented, and how to access and navigate the informative structure [1].
Usability evaluations evaluate the ease of use of a web site functions and see either the user can perform their tasks efficiently. This
paper review existing usability standards and models in determining an appropriate model for evaluating the usability of web site.
Previous research are reviewed and comparison and analysis of existing usability model and identification of usability criteria and
characteristics for web site is made to identify the attribute or characteristic that should be used in evaluating web site.This study
proposed an extension of the QUIM model as a basic model for usability model for a web site. Therefore, a set of guidelines to assist
in determining design and usability
Keywords: web site usability, usability model, usability attributes, QUIM model.
----------------------------------------------------------------------***------------------------------------------------------------------------
1. INTRODUCTION
Evaluation research is necessary to monitor and further
improve the quality of the web sites and use expert focused
and user focused methods to evaluate the web site [2]. A web
site is one or more web page that relate to a common theme
such as a person, business or organization. The front page is
usually called home page and inside the home page it has the
content on the web site. A home page also known as an index
From the home page, there have hyperlinks to access other
web pages within the web site. There are many methods can
use to evaluate the web site. Usability is one of the major
factors that determines the successfulness of a website [3][4].
Usability in the context of web application does not cover only
user interface but includes the content or the information, and
functionalities that application could perform [5]. Poor web
design will make user away and give poor reputation to the
organization [3][6]. Web design is creative process of building
the visual arrangement of text, graphics and other elements
contained in the web site. Beside that business oriented web
site or e-commerce can make organization loss of revenue if
the web site has usability problem [7][8]. Ease of use, the
ability to access the correct information quickly and customer
satisfaction are the important element for information retrieval
according the research [9]. However, the list of usability as
well as the related factors, criteria, and metrics is not
consistently defined across different standards or models [10].
While studies were useful, they have also caused confusion
because many usability aspects offered.
2. LITERATURE REVIEW
This section presents several usability models as the
foundation for proposing an appropriate model for web site
usability. The selected models are the standard and acceptable
model includes Eason, Shackel, Nielson, ISO 9241 – 11, ISO
9126 and QUIM Model.
2.1 Usability Definition
Usability is one of the important characters to make product
such as web site or software usable and quality. Web site
evaluation is determining the quality of the web site. There are
many factors or characteristics to determine the quality of web
site or software [5] [11]. Usability is the most factor in web
site or software quality. There are many quality model that has
usability as quality criteria such as McCall’s Quality Model,
Boehm’s Quality Model, ISO 9126 Quality Model, FURPS
Quality Model, Dromey’s Quality Model and QUIM Quality
Model [11]. Many researchers adapted software usability in
web site usability[12][5][13][14]. Nowadays, web site is use
widely all over a world for medium of communication for
information or services and usability principles was
implementing in web environment and not for software only.
Organization using web sites to market their product and
services User will always used the web site if the web site can
achieve their task or goal for searching the information or
using it services more quickly, easily and effectively [15] [16].
There are many definitions or term about usability. Human
Computer Interaction (HCI) is about designing computer
systems that support people so that they can carry out
activities productively and safely. In HCI term, usability is

__________________________________________________________________________________________
more to usable user interface or in other word to make system
easy to learn and easy to use [17]. Based on ISO 9241 – 11 in
HCI field, usability is defined as the “the extent to which a
product can be used by specified users to achieve specified
goals with effectiveness, efficiency and satisfaction in a
specified context of use” [18][5]. Refer to the definition, the
criteria of usability are effectiveness, efficiency and
satisfaction. It focuses on human interaction perspective for
software product standard. This definition has 3 components
that can divide such as “specified users”, “achieve specified
goals” and “specified context to use”. This definition is more
clearly what usability is mean and many researchers use this
definition [17]. In the field of Software Engineering (SE) in
ISO 9126-1, usability is defined as “ the capability of the
software product to be understood, learned, operated,
attractive to the user, and compliant to conditions” [5]. It has 6
characteristics such as functionality, reliabity, usability,
efficiency, maintainability and portability [19] [20] [21]. Each
of the attributes has their own sub – characteristics. For sub
attributes in usability under ISO 9126-1 are understandability,
learnability, operability, attractiveness and usability
compliance. Some researchers has combine ISO 9126 and ISO
9241 attributes and develop new model that has effectiveness,
efficiency, satisfaction, learnability and security as attributes
[22]. Usability standards provided by (ISO) the International
Standards Organization can be broadly classified into two
categories first, product-oriented standards (ISO 9126, 2001;
ISO 14598, 2001) and second, process-oriented standards
(ISO 9241, 1992/2001; ISO 13407, 1999).
Based on Benbunan-Fich, the usability is defined as “ how
well and how easily a user, without formal training can
interact with an information system of a web site” [23].
According research [24], the element in usability are
learnability and efficiency, aesthetics and navigation, content
and functionality, accuracy and consistency, technical
adequacy, help and documentation and error removal. Judy
Jeng (2005) also use effectiveness, efficiency, satisfaction and
learnability as attributes for usability model for digital library.
She also group usability to two group that is inherent usability
and apparent usability. Inherent usability means to make
product easy to understand, easy to learn, efficient to use, less
erroneous and pleasure. Apparent usability is more related to
visual impression of the interface [25]. Information layout,
server response time, time to load, download time and speed
are the most important variables for web page design [9]. In
the context of web site usability that has specified users,
specified goals and specified context of use. That mean user
has it own role and has it own objective and task to use the
web site in environment and domain in actual usage. Web site
usability can define as a quality attribute that assesses how
easy user interfaces are to use. The definition can divide in
two ways that look to interface or final product based on its
attributes and other hand refer to methods for improving ease
of use during the design process or the approach used to
conduct usability research [26] [27].
Based on study by [20], they analysis the element or attribute
for usability by explore published definitions of usability.
They found that learnability, satisfaction, flexibility,
efficiency, effectiveness and memorability are the most
frequency in 37 formal definitions. 2.2 Review of Usability
model
2.2 Review of Usability Model
According to [28], usability is a product attributes that give
impact or influences the quality of a software system.
Usability models are conceptual view and not only states the
characteristics but also indicates how those characteristics fit
together. There are several usability model such as Eason
Model (1984), Shackel Model (1991), Nielsen Model (1993),
ISO 9241-11(1998), ISO 9126 (2001) and QUIM model
(2006).
2.2.1 Eason Model (1984)
Eason Model is proposed by Kenneth Eason (1984) and
published his model in an early issue of Behaviour and
Information Technology. Eason Model has 3 aspect, task, user
and system. For task it has 2 sub attribute that is frequency and
openness. User has 3 sub attributes that is knowledge,
motivation and discretion. System has ease of learning, ease of
use and task match. Eason Model cannot measure usability
without considering users and their target task. Based on
Eason’s model, it has two parts that is input and outcome. The
input for Eason’s model is user, system, task characteristic and
can define as independent variables. The outcome is user
reaction and it dependent variable. Eason model is causal type
of model because it has input that is independent variable and
outcome or result that is dependent variable. A causal model is
one that makes prediction about causality. Eason model sees
usability as the result of several interacting variables or “multi
- variate”. [17][28].
2.2.2 Shackel Model (1986)
Shackel Model was developed by Brian Shackel. In this
model, it has 4 attributes that is effectiveness, learnability,
flexibility and attitude. Shackel Model does not weight the
dimension, recognizing that the importance of each of these
may different from project to project. Shackel model
emphasizes measurement of a number of human factors,
relating to human performance and attitude [17] [28]. [29]
Modified Shackel model and adapted the model into
usefulness, effectiveness, learnability ( or ease of use ) and
attitude (or likeability). Booth did not include flexibility
because he thought difficult to specify and measure the
flexibility of a system and include useful to be consider as
fundamental to usability [20][28]. [30][31] said that definition
with one or more of four criteria in Booth model are generally
accepted by usability community. Likeability also important to
usability which constitutes user’s perception, feelings and
opinion of product [20][28].

__________________________________________________________________________________________
2.2.3 Nielson Model (1993)
Nielson Model was developed by Jakob Nielson. The main
model is system acceptability and usability is part of
usefulness as figure 2. Other attribute that contribute to the
main model are utility, usefulness, practical acceptability and
social acceptability. Under usability it has 5 attributes such as
easy to learn (learnability), efficient to use (efficiency), easy to
remember (memorability), few error and subjectively pleasing
(satisfaction). Nielson Model focus on acceptability that mean
if the system is not useful such as did not meet the user
requirement, it will not accept it either it usable or not. The
model is based on user interface usability in the context of a
software engineering project. Nielsen emphasizes usability as
part of a larger set of system characteristics. Same with
Shackel Model, Nielson Model also does not weight the
dimension, recognizing that the importance of each of these
may different from project to project. Nielson model is
additive model [17] [28]. Nielson categories the attribute as
below [32]:
2.3.4 ISO 9241 – 11 (1998)
ISO 9241 is an international standard for guidance on usability
based on process oriented. Nielson and Shneiderman are
among the committee members in the development of ISO
guidelines. For ISO 9241 – 11 has 3 attributes that are
effectiveness, efficiency and satisfaction. ISO 9241 – 11 are
put together from a different usability viewpoint.
Effectiveness describes the interaction from the process
viewpoint, efficiency which focus on results and resources
involved and satisfaction which is a user viewpoint
[22][33][28]. ISO 9241-11 has objective measures of
usability [34]. The disadvantage of this model is that it is to
abstract [10] [35].
2.3.5 ISO 9126 (2001)
ISO 9126 is an international standard for the evolution of
software quality model from the product perspective. The
approach was quality model of the product and initially
published in 1991 and refined over the next ten years by ISO’s
group of software engineering experts. ISO 9126 is an
extension of previous work done by McCall (1977), Boehm
(1978), FURPS and others in defining a set of software quality
characteristics [36]. ISO 9126 divided into 4 parts which
address respectively to the quality model, external metrics,
internal metrics and quality in use metric. The internal and
external metrics are functionalities, reliability, usability,
effectiveness, maintainability and portability [22]. Under
usability it has 5 attributes such as understandability,
learnability, operability, attractiveness and usability
compliance [22][33][28]. The advantage of ISO 9126 model is
it provide a framework for making trade-offs between
software product capabilities and the attribute are applicable to
any kind of software including computer programs and
provide consistent terminology for software product quality.
The disadvantage of ISO 9126 was unclear architecture at the
detail level of the measures, overlapping concepts, lack of a
quality requirement standard, lack of guidance in assessing the
results of measurement and ambiguous choice of measures
[34].
2.3.6 Quality in Use Integrated Measurement
(QUIM) (2006)
QUIM or Quality in Use Integrated Measurement developed
by Ahmed Seffah et al in 2006 QUIM is a consolidated model
for usability measurement and metrics. It combines various
standard and model such as ISO 9241 and ISO 9126 and
unified into a single consolidated, hierarchical model. It
outlines methods for establishing quality requirements as well
as identifying, implementing, analyzing, and validating both
process and product quality metrics. This model appropriate
for novice users that have little knowledge of usability and can
be applied by usability experts and non-experts QUIM model
consists of 10 factors and subdivided into 26 criteria or
measurable criteria, and finally into specific metrics consists
127 specific metrics. The 10 factors consists Efficiency,
Effectiveness, Satisfaction, Learnability, Productivity, Safety,
Trustfulness Accessibility, Usefulness and Universality. The
model is used to measure the actual use of working software
and identifying the problem. In QUIM model associates
factors with criteria and metrics in a clear and consistent way.
It also usable generally and can adapt in specific context of
use. The limitation of this model, it is not optimal yet and
needs to be validated [10] [35] [37].
3. PROPOSED MODEL
Some of the usability models have been discussed in this
paper. Refer to table 1 for their main features in usability
model and other researchers that have been made in previous
study. There are many attributes in each model but there has
similarity between the models. Table 2 presented the similarity
between the models.
Table 1 : Similarity between the usability model
Eas
on
Mo
del
Sh
ac
ke
l
M
od
el
Niel
son
Mod
el
ISO
9241
- 11
IS
O
912
6
QUI
M
Effectivenes
s
√ √ √
Efficiency √ √ √ √
Learnability √ √ √ √ √
Satisfaction √ √ √
Accessibilit
y
√

__________________________________________________________________________________________
From table 1, 4 attributes are selected based on frequency in
each model and other study made by researchers to see the
similarity and represent it in table 2. The attribute that have
been selected are effectiveness, efficiency, learnability and
satisfaction. As results in table 1 and 2, the 4 usability
attributes that have been use frequently in the previous model
are selected since they are suitable and important to evaluate
usability on web site. Learnability is the most attribute or
characteristic that used among the models. The satisfaction
attribute selectable because to determine whether the web site
is usable or not. If the user feels more satisfied, they are
willing to reuse and revisit he web portal based on the study
Arbaugh and Duray (2002). In addition, more satisfying
experiences sometimes lead to better learning performance in
the future based on the study conducted by Shih, Muroz, &
Sanchez, 2006 [38]. Based on table 2, it can be concluded that
among the usability model, QUIM model is more complete
than other models and suitable to be used in the web site
usability because it consolidated model based on previous
works and model. QUIM model brings together usability
factors, criteria, metrics and data mentioned in various
standards or model for software quality and defines them and
their relations with one another in a consistent way [10].
Based on the discussions above, QUIM model as a based in
this study and modified it focusing on web site. In table 3,
QUIM model used 4 attribute that are Effectiveness,
Efficiency, Learnability, Satisfaction and also include
Accessibility. This model also based on ISO standards and
previous research in the area usability and quality in use. The
context of use is considered when selecting the aspects of the
web site that should be measured. In this way, the
consideration of context in usability measurement will ideally
make such measurement more realistic and meaningful.[10]
Below in table 3 are the attributes or characteristics that are
choose as the element in the model. In table 4 relation
between the criteria and characteristics for web site usability
are presented. This refinement is done in order to ensure a
systematic approach for evaluating the usability of web site
thoroughly
Attributes /
characteristics
Description
Effectiveness – refer to how good a web site is at doing
what it is supposed to do / the capability
of the web site to enable users to achieve
specified tasks with accuracy and
completeness
Efficiency – the way a system supports user in
carrying out their tasks. / the capability of
the software product to enable users to
expend appropriate amounts of resources
in relation to the effectiveness achieved in
a specified context of use.
Learnability – refer to how easy a web site is to learn to
use.
Satisfaction – refer to how users comfort to use the
web site and their positive attitude after
use the web site. / refers to the subjective
responses from users about their feelings
when using the software / the ease with
which the features required for achieving
particular goals can be mastered. It is the
capability of the software product to
enable users to feel that they can
productively use the software product
right away and then quickly learn other
new (for them) functionalities.
Accessibility - refer to how easy the user to access the
web site even to disability user. / the
capability of a software product to be used
by persons with some type of disability
(e.g., visual, hearing, psychomotor). The
World Wide Web Consortium (Caldwell
et al., 2004) suggested various design
guidelines for making Web sites more
accessible to persons with disability
Table 2 : Features comparison between the usability model
Eason
Model
(1984)
Shack
el
Model
(1986)
Shack
el
Model
(1991)
Schneid
erman
(1992)
Nielson
Model
(1993)
Preece et
al.
(1994)
ISO 9241 –
11 (1998)
Constantin
e &
Lockwood
(1999)
ISO 9126
(2001)
QUIM (2006)
Easy to
use
Effecti
veness
Effecti
veness
(speed
)
Speed
of
perform
ance
Efficient
to use
Through
put
Efficiency Efficiency
in use
Understan
dability
Efficiency
Easy to
learn
Learna
bility
Learn
ability
(retent
Time to
learn
Easy to
learn
Learnabil
ity
(ease of
learnability Learnabili
ty
Learnability

__________________________________________________________________________________________
ion) learning)
Task
match
Flexibi
lity
Retentio
n over
time
Memora
bility
remembera
bility
Operabilit
y
usefulness
Knowle
dge
Attitud
e
Effecti
veness
(error)
Rate of
errors
by users
Errors Through
put
Effectivene
ss
Reliability
in use
Attractive
ness
Effectiveness
Motivat
ion
Attitu
de
Subjecti
ve
satisfact
ion
Satisfacti
on
Attitude Satisfaction User
satisfaction
Usability
complianc
e
Satisfaction
Discreti
on
Productivity
Frequen
cy
Safety
Openne
ss
Trustfulness
Accessibility
universality
Table 3 : Relations between usability criteria and characteristics for web site
Criteria Efficiency Effectiveness Satisfaction Learnability Accessibility
Characteristics
Time behavior √
Resource utilization √
attractiveness √
likeability √
flexibility √ √ √
Minimal action √ √ √ √
Minimal memory load √ √ √ √
Operability √ √ √
User guidance √ √ √
Consistency √ √ √
Selft-descriptiveness √ √
Feedback √ √
Accuracy √
Completeness √
Readability √
Controllability √
Navigability √ √ √
Simplicity √ √
Familiarity √
Loading time √ √
Effectiveness of help web site √
Effectiveness of the user
documentation
√
Response time √ √
Completeness of description √ √ √

__________________________________________________________________________________________
CONCLUSIONS
This study has proposed a usability model for web site based
on QUIM model. There are two immediate contributions of
this work: comparison and analysis of existing usability model
and identification of usability criteria and characteristics for
web site. This model include the criteria how to measure the
web site usability and not only the element. It is easier to
measure the web site based on the criteria that have been
given. For future research, the development of tools for
usability evaluation of web site and empirical assessment of
user’s satisfaction
REFERENCES
[1] D. Robins and J. Holmes, “Aesthetics and credibility
in web site design,” Information Processing &
Management, vol. 44, no. 1, pp. 386–399, Jan. 2008.
[2] S. Elling, L. Lentz, and M. De Jong, “Website
Evaluation Questionnaire : Development of a
Research-Based Tool,” Evaluation, pp. 293–304,
2007.
[3] J. W. Palmer, “Web site usability , design , and
performance metrics,” 2002.
[4] D. Whiteley, I. Hersey, K. Miller, and P. Quick,
“Internet e-Commerce : buying the book and catching
the plane.”
[5] A. Fernandez, E. Insfran, and S. Abrahão, “Usability
evaluation methods for the web: A systematic
mapping study,” Information and Software
Technology, vol. 53, no. 8, pp. 789–817, Aug. 2011.
[6] F. B. Tan and L. L. Tung, “Exploring Website
Evaluation Criteria using the Repertory Grid
Technique : A Web Designers ’ Perspective,”
Technology, pp. 65–69, 2003.
[7] C. C. Whitehead, “Evaluating web page and web site
usability,” Proceedings of the 44th annual southeast
regional conference on - ACM-SE 44, p. 788, 2006.
[8] F. Montero, P. González, M. Lozano, J.
Vanderdonckt, G. D. I. Louise, and E. Uclm, “Quality
Models for Automated Evaluation of Web Sites
Usability and Accessibility,” 2005.
[9] K. E. Schmidt, M. Bauerly, Y. Liu, and S. Sridharan,
“WEB PAGE AESTHETICS AND
PERFORMANCE : A SURVEY AND AN
EXPERIMENTAL STUDY,” in Proceedings of the
8th Annual International Conference on Industrial
Engineering, 2003, pp. 478–484.
[10] A. Seffah, M. Donyaee, R. B. Kline, and H. K. Padda,
“Usability measurement and metrics: A consolidated
model,” Software Quality Journal, vol. 14, no. 2, pp.
159–178, Jun. 2006.
[11] S. K. Dubey and A. Rana, “Analytical Comparison of
Usability Measurement Methods,” vol. 39, no. 15, pp.
11–18, 2012.
[12] B. Behkamal, M. Kahani, and M. K. Akbari,
“Customizing ISO 9126 quality model for evaluation
of B2B applications,” Information and Software
Technology, vol. 51, no. 3, pp. 599–609, Mar. 2009.
[13] C. J. Granizo, P. L. Yanez, D. P. Ramirez, and P. C.
Machado, “Usability in E-government Sites,” 2011
Eighth International Conference on Information
Technology: New Generations, pp. 453–458, Apr.
2011.
[14] F. Computer, M. Sciences, U. Teknologi, M. Uitm,
and S. Alam, “Assessing the Accessibility and
Usability of Malaysia Higher Education Website,” vol.
3, no. 2008, pp. 203–208, 2010.
[15] R. Ramli, “Design and Development of e-RUE as a
Web-based Evaluation Tool,” Symposium A Quarterly
Journal In Modern Foreign Literatures, pp. 1–6,
2010.
[16] Y. Lee and K. a. Kozar, “Understanding of website
usability: Specifying and measuring constructs and
their relationships,” Decision Support Systems, vol.
52, no. 2, pp. 450–463, Jan. 2012.
[17] L. Leventhal and J. Barnes, Usability Engineering
Process, Products, and Examples. Pearson Prentice
Hall, 2008.
[18] M. De Marsico and S. Levialdi, “Evaluating web sites:
exploiting user’s expectations,” International Journal
of Human-Computer Studies, vol. 60, no. 3, pp. 381–
416, Mar. 2004.
[19] Z. Balfagih and M. Mahmud, “In Search of a Model
for Evaluating the Quality of E-Commerce Web sites,”
Quality, no. December 2007, pp. 2–7, 2008.
[20] S. K. Dubey and A. Rana, “Analytical Roadmap to
Usability Definitions and Decompositions,” vol. 2, no.
9, pp. 4723–4729, 2010.
[21] N. Bevan, “Quality and usability : A new framework,”
no. figure 1, pp. 1–8, 1997.
[22] A. Abran, A. Khelifi, W. Suryn, and A. Seffah,
“Usability Meanings and Interpretations in ISO
Standards,” Software Quality Journal, vol. 11, no. 4,
pp. 325–338, 2003.
[23] J. Wang and S. Senecal, “MEASURING
PERCEIVED WEBSITE USABILITY,” Journal of
Internet Commerce, vol. 6, no. 4, pp. 97–112, 2008.
[24] D. Karahoca, A. Karahoca, A. Karaoglu, B.
Gulluoglu, and E. Arifoglu, “Evaluation of web based
learning on student achievement in primary school
computer courses,” Procedia - Social and Behavioral
Sciences, vol. 2, no. 2, pp. 5813–5819, Jan. 2010.
[25] J. Jeng, “Usability Assessment of Academic Digital
Libraries : Effectiveness , Efficiency , Satisfaction ,
and Learnability,” vol. 55, pp. 96–121, 2005.
[26] N. S. Bazar, “Web Usability or Accessibility:
Comparisons between people with and without
intellectual disabilities in viewing complex naturalistic
scenes using eye-tracking technology,” George Mason
University, 2009.

__________________________________________________________________________________________
[27] K. A. Jadhav, “Understanding Usability and User
Experience of a Technology Enhanced Role-Playing
System,” University of Calgary, 2010.
[28] A. Madan and S. K. Dubey, “USABILITY
EVALUATION METHODS : A LITERATURE
REVIEW,” vol. 4, no. 02, pp. 590–599, 2012.
[29] P. Booth, An Introduction To Human-Computer
Interaction. Taylor & Francis, Inc, 1989.
[30] J. Rubin, Handbook of Usability Testing: How to
Plan, Design, and Conduct Effective Tests. Wiley
Technical Communications Library, 1994.
[31] J. Rubin and D. Chisnell, Handbook of Usability
Testing: Howto Plan, Design, and Conduct Effective
Tests, 2nd Edition. 2008, p. 384.
[32] J. Nielsen, “Usability 101: Introduction to Usability,”
2003. [Online]. Available:
http://www.useit.com/alertbox/20030825.html.
[Accessed: 06-Jun-2012].
[33] S. U. Services, H. Court, and L. Wcv, “International
Standards for HCI,” no. May, pp. 1–15, 2006.
[34] P.-Y. Yen, “Health information technology usability
evaluation : methods , models , and measures,”
Columbia University, 2010.
[35] A. Hussain and E. Ferneley, “Usability Metric for
Mobile Application : A Goal Question Metric ( GQM
) Approach,” pp. 567–570, 2008.
[36] R. E. Al-qutaish, “Quality Models in Software
Engineering Literature : An Analytical and
Comparative Study,” vol. 6, no. 3, pp. 166–175, 2010.
[37] A. Khalili, “User Interfaces for Semantic Content
Authoring : A Systematic Literature Review,” no.
May, 2012.
[38] I.-F. Liu, M. C. Chen, Y. S. Sun, D. Wible, and C.-H.
Kuo, “Extending the TAM model to explore the
factors that affect Intention to Use an Online Learning
Community,” Computers & Education, vol. 54, no. 2,
pp. 600–610, Feb. 2010.
BIOGRAPHIES:
Nur Sukinah Aziz (Corresponding author) is a lecturer at the
Faculty of Computer, Media and Technology Management,
TATI University College (TATIUC), Teluk Kalong, 24000
Kemaman, Terengganu, Malaysia. Her research interest
includes web based, multimedia, HCI and software
engineering education system.
Dr. Adzhar Kamaludin is a senior lecturer at the Faculty of
Computer Systems & Software Engineering Universiti
Malaysia Pahang, Kuantan, Pahang, Malaysia.His research
interest includes software engineering, information retrieval
Dr. Norrozila Sulaiman is a senior lecturer at the Faculty of
Computer Systems & Software Engineering Universiti
Malaysia Pahang, Kuantan, Pahang, Malaysia.Her research
interest includes networking, software engineering,
information retrieval

Assessing web site usability measurement

More Related Content

What's hot (10)

Viewers also liked (20)

Similar to Assessing web site usability measurement (20)

More from eSAT Publishing House (20)

Recently uploaded (20)

Assessing web site usability measurement