ASSIGNING NET2-NET8
0 likes36 views
To assign a NET (network) to a fader on the Lawo console, press the BUS key then press 2 to access the second menu. Press the green light next to the desired NET number to turn it yellow, indicating it is active. This will make the NET appear on the desired fader on the Lawo screen. The lights above the faders will update to show inactive in green and active in yellow. NETs 2 through 8 only appear on the Lawo screen, not above the physical faders.
1 of 1
Download to read offline
ASSIGNING NET2-NET8
- 1. LAWO Training – Abe Killian 2016 12 ASSIGNING NET2 – NET8 TO A FADER Go to the top right hand corner of the Panel. You’ll see a green BUS key1 Press the BUS key and then go to the 2nd menu by pressing 2.2 Press the green light on the NET you want. It will go yellow. Here, NET1 and NET3 are now on. 4 Press BUS again to turn off this menu. Now look on the Lawo screen and that NET will now appear on the fader you want it on.5 The lights above your faders have now changed to green (inactive) and yellow (active) 3 NOTE: NET2 – NET8 won’t appear above your faders, just on the Lawo screen.