automated-guided-vehicles.ppt
- 1. A seminar on “AUTOMATED GUIDED VEHICLES”
- 2. CONTENTS Introduction History of AGV’S What is AGV? Types of AGV’s Why consider AGV’s Types of navigations in AGV’s Applications of AGV’s
- 3. AGVs increase efficiency and reduce costs by helping to automate a manufacturing facility or warehouse. AGVs can carry loads or tow objects behind them in trailers. The trailers can be used to move raw materials or finished product. The AGV can also store objects on a bed. some AGVs use fork lifts to lift objects for storage. AGVs are employed in nearly every industry, including, paper, metals, newspaper and general manufacturing. Introduction
- 4. Continued… An AGV can also be called a laser guided vehicle(LGV) or self-guided vehicle (SGV). In Germany the technology is also called Fahrerlose Transport system (FTS) and in Sweden Forarlosa trucker. AGVs are available in a variety of models and can be used to move products on an assembly line, transport goods throughout a plant or warehouse.
- 5. History of AGV’S The first AGV was brought to market in the 1950s, by Barrett Electronics of Northbrook, and at the time it was simply a tow truck that followed a wire in the floor instead of a rail. over the years the technology has become more sophisticated and today automated vehicles are mainly Laser navigated ex: LGV. In an automated process, LGVs are programmed to communicate with other robots to ensure product is moved smoothly through the warehouse, whether it is being stored for future use or sent directly to shipping areas. Today the AGV plays an important role in the design of new factories and warehouses.
- 6. AGV is a material handling system that uses independently operated, self-propelled vehicles guided along defined pathways. What is AGV?
- 7. Types of AGV’S Driverless trains AGV’s pallet trucks Unit load carriers
- 8. Driverless trains:- It consists of a towing vehicle that pulls one or more trailers to form a train. This type is applicable in moving heavy pay loads over large distance in warehouses or factories with or without intermediate pickup and drop off points along the route. It consists of 5-10 trailers and is an efficient transport system. The towing capacity is up to 60,000 pounds
- 10. Driverless train
- 11. AGV Pallet Trucks:- Pallet trucks are used to move palletized loads along predetermined routes. The capacity of an AGV pallet truck ranges up to several thousand kilograms and some are capable of handling two pallets. It is achieved for vertical movement to reach loads on racks and shelves.
- 12. AGV Pallet Truck
- 14. Unit load carriers:- These are used to move unit loads from one station to another. It is also used for automatic loading and unloading of pallets by means of rollers. Load capacity ranges up to 250 kg or less. Especially these vehicles are designed to move small loads.
- 17. Why consider AGVs? Reduces the labor cost. Flexible. Intelligent. Time consuming. Can significantly reduce production & warehouse costs. Transforming the materials handling industry.
- 18. Types of navigation in AGV’S Wired navigation Guide tape navigation Laser target navigation
- 19. Wired navigation The wired sensor is placed on bottom of the AGV’S and is placed facing the ground. A slot is cut in the ground and a wire is placed approximately 1 inch below the ground. The sensors detects the radio frequency being transmitted from the wire and follows it.
- 21. Guide tape navigation The AGV’S( some known as automated guided carts or AGC’S) use magnetic tape for the guide path. The AGC’S is fitted with the appropriate guide sensors to follow the path of the tape. It is considered a “passive” system since it does not require the guide medium to be energized as wire does.
- 22. Guide tape navigation AGV’S
- 23. Laser target navigation The AGV’S carry’s a laser transmitter and receiver on a rotating turret. The laser is sent off then received again the angle and distances are automatically calculated and stored into AGV’S memory. The AGV’S has reflector map stored in memory and can correct its position based on errors between the expected and received measurements. 2/21/2023
- 24. Continued… It can then navigate to a destination target using the constantly updating position.
- 25. Laser target navigation AGV’S
- 26. Common AGV Applications Automated Guided Vehicles can be used in a wide variety of applications to transport many different types of material including pallets, rolls, racks, carts, and containers. Raw Material Handling:- AGVs are commonly used to transport raw materials such as paper, steel, rubber, metal, and plastic. This includes transporting materials from receiving to the warehouse, and delivering materials directly to production lines.
- 27. Work-in-Process Movement:- Work-in-Process movement is one of the first applications where automated guided vehicles were used, and includes the repetitive movement of materials throughout the manufacturing process. Pallet Handling:- Pallet handling is an extremely popular application for AGVs as repetitive movement of pallets is very common in manufacturing and distribution facilities.
- 28. Finished Product Handling:- Moving finished goods from manufacturing to storage or shipping is the final movement of materials before they are delivered to customers. These movements often require the gentlest material handling because the products are complete and subject to damage from rough handling.
- 29. Pallet handling Finished goods handling
- 30. Thank you