Axetenzemanual
0 likes160 views
This document provides instructions for safely handling and operating paintball markers. It emphasizes that markers should always be carried in a case when not on a playing field to avoid alarming the public. It also lists important safety steps like wearing proper eye protection and keeping the marker pointed in a safe direction. The remaining document provides detailed instructions for installing an aXetenZe rail accessory onto a paintball marker.
Axetenzemanual
- 1. Safe Marker Handling aXetenZe Installation Important: Never carry your marker uncased when not on a playing field. The non-playing public and law enforcement personnel may 1) Insure marker is degassed. not be able to distinguish between a paintball marker and firearm. For your own safety and to protect the image of the sport, always 2) Using a 5/64” Allen wrench, remove the four grip screws and place your grips aside. carry your marker in a suitable marker case or bag. 3) Loosen the two set screws(#6) located on the base of the trigger frame that secure the stock regulator and Safety and safe marker handling are the most important aspects of regulator mount using a 3/32” Allen wrench. paintball sports. Please Practice each of the following steps with an unloaded marker before attempting to operate your marker with an 4) Slide the regulator and regulator mount from the frame. Careful not to lose the female air tube o-ring(#2) which will air source and paintballs. be needed later on. *note: a spare o-ring is has been provided. • Every person within range must wear eye, face and ear 5) Remove the regulator mount from the regulator. You can put this aside, as you will no longer need this while using protection designed specifically to stop paintballs and meeting your aXetenZe rail. ASTM standards. • Treat every marker as if it were loaded. 6) Make sure o-ring(#2) is installed in the stock regulator’s air tube receiving hole. • Never look down the barrel of a paintball marker. • Do not install an air source or load paintballs into your maker 7) Slide aXetenZe regulator mount(#1) into the stock regulator dovetail slot. Align the hole of the aXtenZe regulator until you have completely read and understood this manual and mount with the stock regulator’s air tube receiving hole. fee completely confident with your ability to handle your marker safely. 8) Install the aXetenZe rail(#3) to the aXtenZe regulator mount by placing the rail on top of the regulator mount. Make • Keep the markers safety on until ready to shoot. sure the rail’s air transfer tube is aligned with the stock regulators receiving hole. • Keep your finger out of the trigger guard and away from the trigger; point the muzzle of the marker in a safe direction at all 9) Secure the aXtenZe rail to the rail mount by tightening two set screws(#4). Optional two locking washers(#7) times. provided may be used to lock the set screws for a tighter fit. • Keep the barrel blocking device in/on the markers barrel when not shooting. 10) Place the o-ring(#5) the larger of the two o-rings provided in the circular cutout on the top side of the aXetenZe • Store the marker unloaded and degassed in a secure place. rail(#3). The o-ring will be tight, when mounting your aXetenZe rail to the markers frame the o-ring will seat itself • Follow warnings listed on the air source for handling and farther down into this cutout. storage. • Do not shoot at fragile objects such as windows. 11) Mount your aXetenZe rail and stock regulator to the frame by sliding the assembly back into the base of the trigger • Never shoot at velocities in excess of 300 feet-per-second. frame. Tighten the two set screws(#6) making sure your aXetenZe is flush to the frame and tight. *note: if there is a • Always keep your marker pointed in a safe direction and use a gap between your rail and grip frame, adjust your markers transfer tube by rotating it so it moves up or down. barrel blocking device. • Remember that the ultimate safety device is you, the operator. 12) Re-install the grips and grip screws. aXetenZe Package Contents Careless or improper use including failure to follow instructions in you Markers Operators Manual could cause serious injury or death. User and all persons within range of the maker must wear proper eye and head protection designed for paintball use. Always treat the marker as if it were loaded and able to fire. Please read and understand all instruction manuals before use. Any installations, modifications, or repairs should be carried out by qualified individual at a licensed and insured paintball facility. Prior to installation de-gas your marker discharging any stored gas in a safe direction. Ensure there is no paint the in the breech before commencing installation.