Br 800 l-v1.1_e01
0 likes499 views
1) The document describes new functions added in version 1.1 for copying, moving, erasing, and exchanging track data when editing tracks. 2) It allows the user to copy effect settings between song and user patches or banks, and explains how to copy data between tracks by specifying sources, destinations, and regions using time or measures. 3) New track editing functions like MOVE and EXCHANGE are introduced, and detailed instructions are provided for carrying out copy, move, erase, and exchange operations on track data through simple menus.
![Additional Functions in Version 1.1
Copying Insert Effects
(EFFECT BANK COPY)
The user patches for an insert effect can be copied to song
patches in the same bank, or song patches can be copied to
user patches in the same bank.
Since user patches stored in this unit can be copied to songs
on an SD card, you can conveniently use this for a variety of
purposes, including making backups.
1
2
Press the [EFFECTS] button.
Use the CURSOR [ ] [ ] buttons to move the cursor
to “BANK COPY,” and press the [ENTER] button.
Track Editing (TRACK EDIT)
Two new functions, MOVE (for moving data) and
EXCHANGE (allows you to replace data) have been added
to the functions available for editing tracks.
Additionally, it is now possible to define a region in terms
of time or measures when performing COPY and ERASE.
Thanks to these new features, you should be able to carry
out track editing more efficiently.
■ Copying track data
The specified source track data will be copied to the
specified destination track. If recorded data exists at the
destination of the copy, it will be overwritten by the data
that was copied.
Example 1: Copying twice to the same track
Track 1
3
4
Use the CURSOR [ ] [ ] buttons to move the cursor
to “BANK,” and use the dial to select the desired bank.
If you select “ALL,” copy of all the user (song) patches
in all the banks will be carried out.
All song patches in the selected
bank will be copied to user patches.
To copy the data, press the [ENTER] button.
A message will ask “Are you sure?”
6
Track 2
(A)
TO
(B)
START or
Repeat start point END or Repeat end point
All user patches in the selected bank
will be copied to song patches.
SONG→
USER
Time
Track 1
Explanation
USER→
SONG
TO
(B)
END or Repeat end point
Example 2: Copying twice to a different track
Use the CURSOR [ ] [ ] buttons to move the cursor
to “MODE,” and use the dial to select the copy mode.
Mode
5
(A)
START or
Repeat start point
1
2
Time
Press the [TRACK] button.
Use the CURSOR [ ] [ ] buttons to move the cursor
to “TRACK EDIT,” and press the [ENTER] button.
If you’re sure you want to copy the data, press the
[ENTER] button. If you decide to cancel without
copying, press the [EXIT] button.
When the data has been written, you will return to the
EFFECT screen.
* The display will indicate “Keep power on!” while the data is
being updated. Do not turn off the power while this message
is shown.
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “COPY,” and press the [ENTER] button.
1](https://image.slidesharecdn.com/br-800lv1-131207055916-phpapp02/85/Br-800-l-v1-1_e01-1-320.jpg)
![Additional Functions in Version 1.1
6
Press the [ENTER] button.
The copy will be carried out.
4
* The display will indicate “Keep power on!” while the data is
being updated. Do not turn off the power while this message
is shown.
Make the settings for performing a copy using the
CURSOR buttons and the dial.
Parameter
7
Explanation
Press the [EXIT] button a number of times to return to
the play screen.
SOURCE
Select the copy-source track and V-track.
DEST
■ Moving Track Data
Select the copy-destination track and V-track.
This operation moves the data of the specified track.
TYPE
If recorded data exists at the destination of the move, it will
be overwritten by the data that was moved.
Select the type of copy.
* The parameters displayed will depend on the type you
select.
AB (TIME)
The START and END will be the
time locations you specified for AB
Repeat.
TO is specified as a time location.
AB
(MEASURE)
The START and END will be the
time locations you specified for AB
Repeat.
TO is specified as a measure.
TIME
Specify START, END, and TO as
time locations.
MEASURE
Specify START, END, and TO as
measures.
ALL (TIME)
The entire track will be copied.
TO is specified as a time location.
ALL
(MEASURE)
The entire track will be copied.
TO is specified as a measure.
Example 1: Moving within the same track
Track 1
START
END
TO
Time
Example 2: Copying twice to a different track
Track 1
Track 2
START
1
START
END
TO
Time
Press the [TRACK] button.
Specify the start of the copy source.
END
2
Specify the end of the copy source.
TO
Use the CURSOR [ ] [ ] buttons to move the cursor
to “TRACK EDIT,” and press the [ENTER] button.
Specify the start of the copy destination.
REPEAT
Specify the number of repetitions (1–99).
5
To copy the data, press the [ENTER] button.
A message will ask “Are you sure?”
If you decide to cancel the procedure, press the [EXIT]
button.
2
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “MOVE,” and press the [ENTER] button.](https://image.slidesharecdn.com/br-800lv1-131207055916-phpapp02/85/Br-800-l-v1-1_e01-2-320.jpg)
![Additional Functions in Version 1.1
■ Erasing track data
This operation erases data from the specified region.
Track 1
Track 1
4
Make the settings for performing a move using the
CURSOR buttons and the dial.
Parameter
Explanation
START
1
SOURCE
Select the move-source track and V-track.
DEST
2
Select the move-destination track and V-track.
END
Time
Press the [TRACK] button.
Use the CURSOR [ ] [ ] buttons to move the cursor
to “TRACK EDIT,” and press the [ENTER] button.
TYPE
Select the type of move.
* The parameters displayed will depend on the type you
select.
TIME
Specify START, END, and TO as
time locations.
MEASURE
Specify START, END, and TO as
measures.
ALL (TIME)
The entire track will be moved.
TO is specified as a time location.
ALL
(MEASURE)
The entire track will be moved.
TO is specified as a measure.
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “ERASE,” and press the [ENTER] button.
START
Specify the start of the move source.
END
Specify the end of the move source.
TO
Specify the start of the move destination.
5
To move, press the [ENTER] button.
A message will ask “Are you sure?”
If you decide to cancel the procedure, press the [EXIT]
button.
6
Press the [ENTER] button.
The data will be moved.
* The display will indicate “Keep power on!” while the data is
being updated. Do not turn off the power while this message
is shown.
7
Press the [EXIT] button a number of times to return to
the play screen.
4
Make the settings for performing an erasure using the
CURSOR buttons and the dial.
Parameter
Explanation
SOURCE
Select the erase-source track and V-track.
TYPE
Select the type of erasure.
* The parameters displayed will depend on the type you
select.
TIME
MEASURE
ALL
Specify START and END as time
locations.
Specify START and END as measures.
The entire track will be erased.
START
Specify the start of the erase source.
END
Specify the end of the erase source.
3](https://image.slidesharecdn.com/br-800lv1-131207055916-phpapp02/85/Br-800-l-v1-1_e01-3-320.jpg)
![Additional Functions in Version 1.1
5
To erase, press the [ENTER] button.
A message will ask “Are you sure?”
If you decide to cancel the procedure, press the [EXIT]
button.
6
4
Press the [ENTER] button.
The data will be erased.
* The display will indicate “Keep power on!” while the data is
being updated. Do not turn off the power while this message
is shown.
7
Press the [EXIT] button a number of times to return to
the play screen.
■ Exchanging Data
This operation exchanges data between two tracks.
Example:
Exchanging the entire contents of tracks 1 and 2
Track 1
Track 2
To exchange, press the [ENTER] button.
A message will ask “Are you sure?”
If you decide to cancel the procedure, press the [EXIT]
button.
6
Press the [ENTER] button.
The data will be exchanged.
* The display will indicate “Keep power on!” while the data is
being updated. Do not turn off the power while this message
is shown.
7
Vocal
Track 2
2
Vocal
Track 1
1
Guitar
5
Use the CURSOR buttons and the dial to select the
tracks and V-tracks that you want to exchange.
Guitar
Press the [EXIT] button a number of times to return to
the play screen.
Press the [TRACK] button.
Use the CURSOR [ ] [ ] buttons to move the cursor
to “TRACK EDIT,” and press the [ENTER] button.
Copyright © 2011 BOSS CORPORATION
3
4
All rights reserved. No part of this publication may be
reproduced in any form without the written permission of
BOSS CORPORATION.
Use the CURSOR [ ] [ ] buttons to move the
cursor to “EXCHANGE,” and press the [ENTER]
button.
BOSS is a registered trademark of BOSS CORPORATION
in the United States and/or other countries.](https://image.slidesharecdn.com/br-800lv1-131207055916-phpapp02/85/Br-800-l-v1-1_e01-4-320.jpg)
Br 800 l-v1.1_e01
- 1. Additional Functions in Version 1.1 Copying Insert Effects (EFFECT BANK COPY) The user patches for an insert effect can be copied to song patches in the same bank, or song patches can be copied to user patches in the same bank. Since user patches stored in this unit can be copied to songs on an SD card, you can conveniently use this for a variety of purposes, including making backups. 1 2 Press the [EFFECTS] button. Use the CURSOR [ ] [ ] buttons to move the cursor to “BANK COPY,” and press the [ENTER] button. Track Editing (TRACK EDIT) Two new functions, MOVE (for moving data) and EXCHANGE (allows you to replace data) have been added to the functions available for editing tracks. Additionally, it is now possible to define a region in terms of time or measures when performing COPY and ERASE. Thanks to these new features, you should be able to carry out track editing more efficiently. ■ Copying track data The specified source track data will be copied to the specified destination track. If recorded data exists at the destination of the copy, it will be overwritten by the data that was copied. Example 1: Copying twice to the same track Track 1 3 4 Use the CURSOR [ ] [ ] buttons to move the cursor to “BANK,” and use the dial to select the desired bank. If you select “ALL,” copy of all the user (song) patches in all the banks will be carried out. All song patches in the selected bank will be copied to user patches. To copy the data, press the [ENTER] button. A message will ask “Are you sure?” 6 Track 2 (A) TO (B) START or Repeat start point END or Repeat end point All user patches in the selected bank will be copied to song patches. SONG→ USER Time Track 1 Explanation USER→ SONG TO (B) END or Repeat end point Example 2: Copying twice to a different track Use the CURSOR [ ] [ ] buttons to move the cursor to “MODE,” and use the dial to select the copy mode. Mode 5 (A) START or Repeat start point 1 2 Time Press the [TRACK] button. Use the CURSOR [ ] [ ] buttons to move the cursor to “TRACK EDIT,” and press the [ENTER] button. If you’re sure you want to copy the data, press the [ENTER] button. If you decide to cancel without copying, press the [EXIT] button. When the data has been written, you will return to the EFFECT screen. * The display will indicate “Keep power on!” while the data is being updated. Do not turn off the power while this message is shown. 3 Use the CURSOR [ ] [ ] buttons to move the cursor to “COPY,” and press the [ENTER] button. 1
- 2. Additional Functions in Version 1.1 6 Press the [ENTER] button. The copy will be carried out. 4 * The display will indicate “Keep power on!” while the data is being updated. Do not turn off the power while this message is shown. Make the settings for performing a copy using the CURSOR buttons and the dial. Parameter 7 Explanation Press the [EXIT] button a number of times to return to the play screen. SOURCE Select the copy-source track and V-track. DEST ■ Moving Track Data Select the copy-destination track and V-track. This operation moves the data of the specified track. TYPE If recorded data exists at the destination of the move, it will be overwritten by the data that was moved. Select the type of copy. * The parameters displayed will depend on the type you select. AB (TIME) The START and END will be the time locations you specified for AB Repeat. TO is specified as a time location. AB (MEASURE) The START and END will be the time locations you specified for AB Repeat. TO is specified as a measure. TIME Specify START, END, and TO as time locations. MEASURE Specify START, END, and TO as measures. ALL (TIME) The entire track will be copied. TO is specified as a time location. ALL (MEASURE) The entire track will be copied. TO is specified as a measure. Example 1: Moving within the same track Track 1 START END TO Time Example 2: Copying twice to a different track Track 1 Track 2 START 1 START END TO Time Press the [TRACK] button. Specify the start of the copy source. END 2 Specify the end of the copy source. TO Use the CURSOR [ ] [ ] buttons to move the cursor to “TRACK EDIT,” and press the [ENTER] button. Specify the start of the copy destination. REPEAT Specify the number of repetitions (1–99). 5 To copy the data, press the [ENTER] button. A message will ask “Are you sure?” If you decide to cancel the procedure, press the [EXIT] button. 2 3 Use the CURSOR [ ] [ ] buttons to move the cursor to “MOVE,” and press the [ENTER] button.
- 3. Additional Functions in Version 1.1 ■ Erasing track data This operation erases data from the specified region. Track 1 Track 1 4 Make the settings for performing a move using the CURSOR buttons and the dial. Parameter Explanation START 1 SOURCE Select the move-source track and V-track. DEST 2 Select the move-destination track and V-track. END Time Press the [TRACK] button. Use the CURSOR [ ] [ ] buttons to move the cursor to “TRACK EDIT,” and press the [ENTER] button. TYPE Select the type of move. * The parameters displayed will depend on the type you select. TIME Specify START, END, and TO as time locations. MEASURE Specify START, END, and TO as measures. ALL (TIME) The entire track will be moved. TO is specified as a time location. ALL (MEASURE) The entire track will be moved. TO is specified as a measure. 3 Use the CURSOR [ ] [ ] buttons to move the cursor to “ERASE,” and press the [ENTER] button. START Specify the start of the move source. END Specify the end of the move source. TO Specify the start of the move destination. 5 To move, press the [ENTER] button. A message will ask “Are you sure?” If you decide to cancel the procedure, press the [EXIT] button. 6 Press the [ENTER] button. The data will be moved. * The display will indicate “Keep power on!” while the data is being updated. Do not turn off the power while this message is shown. 7 Press the [EXIT] button a number of times to return to the play screen. 4 Make the settings for performing an erasure using the CURSOR buttons and the dial. Parameter Explanation SOURCE Select the erase-source track and V-track. TYPE Select the type of erasure. * The parameters displayed will depend on the type you select. TIME MEASURE ALL Specify START and END as time locations. Specify START and END as measures. The entire track will be erased. START Specify the start of the erase source. END Specify the end of the erase source. 3
- 4. Additional Functions in Version 1.1 5 To erase, press the [ENTER] button. A message will ask “Are you sure?” If you decide to cancel the procedure, press the [EXIT] button. 6 4 Press the [ENTER] button. The data will be erased. * The display will indicate “Keep power on!” while the data is being updated. Do not turn off the power while this message is shown. 7 Press the [EXIT] button a number of times to return to the play screen. ■ Exchanging Data This operation exchanges data between two tracks. Example: Exchanging the entire contents of tracks 1 and 2 Track 1 Track 2 To exchange, press the [ENTER] button. A message will ask “Are you sure?” If you decide to cancel the procedure, press the [EXIT] button. 6 Press the [ENTER] button. The data will be exchanged. * The display will indicate “Keep power on!” while the data is being updated. Do not turn off the power while this message is shown. 7 Vocal Track 2 2 Vocal Track 1 1 Guitar 5 Use the CURSOR buttons and the dial to select the tracks and V-tracks that you want to exchange. Guitar Press the [EXIT] button a number of times to return to the play screen. Press the [TRACK] button. Use the CURSOR [ ] [ ] buttons to move the cursor to “TRACK EDIT,” and press the [ENTER] button. Copyright © 2011 BOSS CORPORATION 3 4 All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. Use the CURSOR [ ] [ ] buttons to move the cursor to “EXCHANGE,” and press the [ENTER] button. BOSS is a registered trademark of BOSS CORPORATION in the United States and/or other countries.