Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues and Database Abstraction

International Journal of Engineering Inventions
e-ISSN: 2278-7461, p-ISSN: 2319-6491
Volume 2, Issue 9 (May 2013) PP: 16-23
www.ijeijournal.com Page | 16
Wireless Sensor Network in Niger Delta Oil and Gas Field
Monitoring: Issues and Database Abstraction
Fidelis C. Obodoeze1
, Frank E. Ozioko2
, Francis A. Okoye3
, Thankgod I. Ozue4
,
Samuel C. Asogwa5
And Calista N. Mba6
1
Department of Computer Science Renaissance University Enugu, Nigeria
All correspondence to
2, 3
Department of Computer and Information Science, Enugu State University of Science and Technology
(ESUT), Nigeria
3
Nyzpat Technologies Port Harcourt, Rivers State , Nigeria
4
Department of Computer Science, Michael Okpara University of Agriculture, Umudike, Nigeria
5
Department of Computer Engineering Caritas University Amorji-Nike Enugu, Nigeria
ABSTRACT: The IEEE 802.15.4 enabled Wireless Sensor Networks (WSNs) have found useful applications in
mission-critical environments especially in Nigeria oil and gas field monitoring, Niger Delta region, to perform
real-time monitoring and surveillance of critical oil and gas pipelines, plants, wells and flow stations. Outputs
from quantitative sensors such as pressure, vibration, Passive Infra Red (PIR) movement, flowrate, Infrared
thermo (temperature) sensors and qualitative sensors such as wireless IP cameras (triggered by actuators)
when certain threshold conditions are breached. The integration of sensors and actuators can be combined
effectively to detect instant intrusion, leakage, rupture or vandalisation of oil facilities such as pipelines in such
a manner that sensed data can be passed to the control room or intelligent actuators for immediate actions. In
this paper, we propose a database abstraction framework using tinydb database management system (DBMS)
that can enable real-time data coming from these sensors to be stored, updated and queried by a client-server
system so that visualizations can be performed using a standard client-based browser interface (www or http://).
KEYWORDS: WIRELESS SENSOR NETWORK WSN, NIGER DELTA REGION, NIGERIA, OIL PIPELINES, OIL AND GAS FIELD
MONITORING, MISSION-CRITICAL, DATABASE ABSTRACTION, EVENT-TRIGGERED MONITORING, PERIODIC MONITORING,
TINYDB.
I. INTRODUCTION
Wireless sensor networks are IEEE 802.15.4 enabled devices capable of robust and reliable multi-hop
communications [1],[2]. Wireless sensors can be deployed in unattended environments and can enable collection
of data from there to distant base stations and then to control room [3], [4].
Wireless sensors have found useful applications in varying number of civilian and military applications
because of their low-cost and ease of deployment [2],[5],[6]. Because of these inherent and other advantages,
wireless sensor networks have found useful applications in environmental monitoring applications especially in
oil and gas fields. Wireless Sensor Networks (WSNs) exists in various quantitative and qualitative sensor types
to enable samplings and measurements of oil and gas field parameters such as temperature, pressure, vibration,
flow rate etc. These quantitative and qualitative sensors cannot work alone; they need actuators to be attached
to them as well as means of communication so as to transfer their sampled data to the control station for
immediate action to be taken in the event of detection of leakage, rupture or intentional vandalisation of oil and
gas facility from the remote field. Some sensor nodes are just sensors only while some are sensors with attached
actuators [7]. Some WSNs can assist in the communication or transfer of the sampled data from the remote oil
fields and to the base station and then to the control room or station. In Nigeria Niger Delta region, the greatest
challenge facing the oil and gas sector is that of physical security – vandalisation of oil and gas pipelines by
hoodlums and criminal-minded individuals to steal crude oil and other refined petroleum products. Quantitative
and qualitative wireless sensors have replaced traditional-based monitoring technologies such as wired fibre
optics and satellite because these technologies are difficult to deploy, maintain and operate. Wireless sensor
networks (WSNs) are resource-constrained communication devices that have low power, low memory, low
computing capability, utilizes wireless communication and have inbuilt sensing units. Figure 1 depicts the
diagram of a typical WSN node with low battery power, CPU with limited computing capability, wireless aerial
antenna or transceiver etc. Figure 2 depicts a high-level schematic representation of a WSN node hardware with
attached environmental sensors and actuators.

Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues and Database
Figure 1. Hardware unit of a Wireless Sensor Network node[8]
Figure 2. A high-level schematic representation of a WSN node hardware [9]
For a distributed processing network such as Wireless Sensor Actuator Network (WSAN), periodic and
event-triggered monitoring/actuation is required to effectively use WSN to monitor oil and gas pipelines and
facilities. Periodic monitoring/actuation involve continuous processing of sensed remote data from the oil
fields. The application performs periodic tasks to gather sensor readings, coordinates with other parts of the
system, and possibly performs actuation as needed. Event-triggered monitoring/actuation in applications are
characterised by two phases: 1) during event detection, the system is largely quiescent, with each node
monitoring the values its samples from the environment (oil field) with little or no communication involved: 2)
if and when the event condition is met (e.g. a pressure sensor value lowers below a certain threshold or a
vibration or infrared temperature sensor raises above a threshold value or when an intrusion is detected using a
Passive Infrared (PIR) motion detector or sensor), the WSN begins its distributed processing.
To successfully monitor the remote oil and gas installations and facilities in the Niger Delta region,
periodic as well as event-triggered monitoring/actuation is required. The sensed remote data from the
quantitative and qualitative wireless sensors units installed in the oil and gas fields must be sampled and the
sensor data transmitted or communicated to either installed actuators to take pre-emptive response to the
vandalisation such as raising continuous audible alarm to scare away the vandals using a mobile robots or
recording video scenes of the vandalisation and transferring the same data to the Supervisory Control And Data
Acquisition (SCADA) control room via a wireless base station proactively.
The real-time data from the wireless sensors and the actuators must be stored in a database in an
embedded PC or microcontroller and then parsed to the internet (www) or to the intranet of the oil company that
installed it using http:// interface in the SCADA software. Figure 3 shows the workflow datagram for the
database abstraction from oil and gas sensors to the WSN source nodes to the actuator nodes and then to the
WSN source nodes and finally to the wireless base station in the WSN Gateway. Figure 4 depicts the data flow
diagram (DFD) of the proposed WSN-Actuator monitoring system with backend software tools.

Figure 3. Workflow diagram of the proposed WSAN monitoring system for oil and gas field

Figure 4. Data Flow Diagram (DFD) of the proposed WSN-Actuator monitoring system for oil and gas field
Niger Delta region with backend database abstraction.
II. THE PROPOSED DATABASE ABSTRACTION FOR REMOTE DATA ACQUSITION FROM OIL
AND GAS FIELD MONITORING
The proposed database abstraction framework will use Tinydb database management system (DBMS).
2.1. Tinydb Database Management System (DBMS)
Tinydb is a joint work from Massachusetts Institute of Technology (MIT), UCB and Intel Research
Unit. It is a very powerful DBMS for resource-constrained embedded devices such as wireless sensors and
microcontrollers and at such very suitable for data acquisition of environmental variables from remote locations.
Tinydb is widely used in real world applications especially in real-time monitoring. According to [10], In
Tinydb, sensed data are indeed made available as entries of a sensors table, and the user accesses the table using
SQL-like queries. To cater with the peculiarities of WSN applications, however, further constructs are provided
to express, for instance, the lifetime and period of queries.
2.2. Data Access modelling for the proposed abstraction
The data modelling for the proposed database abstraction framework for the sampling of remote data or
data acquisition for the sampled environmental field data from quantitative and qualitative sensors monitoring
the oil and gas field includes the following data:
 sensordata1,
 sensordata2,
 sensordata3,
 sensordata4, and
 sensordata5
Representing sensor data from pressure, vibration, flowrate, PIR motion detection and Infrared
temperature sensors respectively. Actuator data actndata1, actndata2 represent actuated data coming from
attached actuated-devices such as wireless IP camera to record surveillance video/image data from the scene(s)
of the oil and gas pipeline leakage or intentional vandalisation and the captured data are passed to the WSAN
Gateway for onward transmission to the Control PC or embedded PC (microcontroller) and then to the database
server.
2.2.1. The table structures for the proposed database Abstraction
We propose two (2) database tables - sensors and actuators for the database remote_data to effectively
capture and store the sampled remote data from the five (5) quantitative sensors and two (2) qualitative sensors
attached to the two actuators respectively. The database table structures of the sensors and actuators tables are
depicted in Table 1 and Table 2 below respectively but because the developers of Tinydb DBMS did not
concern themselves about actuator data but concentrated on only sensor data [11]. This means that only sensors
table can be used to sample and store sensor and actuation data.
Table 1. Sensors table without actuation data sensors Table
nodeid sensor_type sensordata sampled_time
1 Pressure sensordata1 time1
2 Vibration Sensordata2 time2
3 Flowrate Sensordata3 time3
4 PIR movement Sensordata4 time4
5 Infrared temperature Sensordata5 time5
Table 2. Actuator table actuators Table
actuatorid Video_data sampled_time
1 actndata1 time1
2 actndata2 time2
Hence we submerge the two proposed tables, sensors and actuators tables into one (sensors table)
according to the specification of Tinydb. Data acquisition query syntax has been extended to support actuators
using a new keyword. To solve declarative nature violations we need better query syntax for actuation tasks [7].

Hence the sensor table in Table 1can be modified to include actuator data (in Table 2) using UPDATE SQL
command of Tinydb as contained in Table 3.
Table 3: New Sensors table including actuation data Sensors table
Nod
e id
pressure vibration flowra
te
PIR
movement
Infrared
temperature
sampled
_time
actuatorn
ode1
actuatorn
ode2
1 sensordata
1
NULL NULL NULL NULL time1 actndata1 NULL
2 NULL sensordata2 NULL NULL NULL time2 actndata1 NULL
3 NULL NULL Sensor
data3
NULL NULL time3 actndata1 NULL
4 NULL NULL NULL sensordata4 NULL time4 NULL actndata2
5 NULL NULL NULL NULL sensordata5 time5 NULL actndata2
Special keywords can be used in tinydb SQL to invoke a pre-determined action or response of the
actuators once the threshold of a particular sensor is reached and surpassed. For instance, in our real-time
monitoring of oil and gas field (oil pipelines) using the five sensors (see Figure 3) – pressure, vibration, flow
rate, infra-rays and temperature, let’s assume that leakage of pipeline is confirmed when pressure level is less
than 50, vibration level is more 60, flow rate reduces below 122 then automatically means that there is leakage
or pipeline rupture which can be caused by natural causes (like corrosion) or intentional causes like
vandalisation. The actuatornode1 is then activated or invoked to take action (maybe by switching on a video
surveillance camera to start recording the scenes of the oil field to capture possibly the video footages of the
vandals). The query execution processes using tinydb DBMS involving wireless quantitative sensor nodes
(WSN) only and Wireless Sensor Actuator Network (WSAN) are shown in Figure 5 and Figure 6 respectively.
Figure 5. The query process using Tinydb using SELECT command involving Wireless Sensor Network (WSN)
using TCP connection
Figure 6. The query process using Tinydb using UPDATE command involving Wireless Sensor Network
(WSN) using TCP connection

2.3. Sampling and data acquisition of the multiple sensors data and triggering actuation
Multiple sensors can also be combined to eliminate the possibility of false detection of pipeline
leakages. For instance we can combine the output of the first three sensors- pressure, vibration, flowrate
(attached to the actuatornode1) with that of the second set of two sensors- PIR motion detector, PIR temperature
(attached to the actuatornode2) and the combination will really confirm if there is leakage or vandalisation in
the oil pipeline and the two actuators (actuatornode1 and actuatornode2) will be invoked to trigger the two
attached wireless IP cameras to start recording the scenes in their immediate surrounding to enable the IOC to
track and arrest the pipeline vandals. Let us assume that the threshold values for the second set of sensors are
given as- PIR motion detector is less than 20, PIR temperature sensor is more than 75 units respectively.
The following SQL commands in tinydb can be used to accomplish the scenario described above involving the
five sensors and two actuators:
UPDATE sensors AS sen, sensors AS act
SET act.actuatornode1=’on’ AND
act.actuatornode2=’on’
WHERE (nodeid=1 AND pressure<50) AND (nodeid=2 AND
vibration>60) AND (nodeid=3 AND flowrate<122) AND (nodeid=4 AND
pir_motion_detector<20) AND (nodeid=5 AND pir_temperature>75)
ONCE;
The tinydb SQL commands will automatically trigger the two wireless IP cameras actuators
(actuatornode1 and actutornode2, see Figure 3) to start recording the video footage of the oil fields (in order to
possible capture the vandals) since the threshold values for the five sensors have been exceeded (either reduced
or increased).
2.3.1. Triggering the actuator node attached to the first set of sensors:
If we want to trigger the actuator attached (actuatornode1 only) to the first set of sensors – pressure,
vibration and flow rate with the same threshold conditions (pressure<50, vibration>60, flowrate<122) to trigger
one(1) wireless IP camera to start recording the scene of the oil field, we will use the following tinydb SQL
commands to accomplish that:
SET act.actuatornode1=’on’
WHERE (nodeid=1 AND pressure<50)AND (nodeid=2 AND vibration>60)
AND (nodeid=3 AND flowrate<122) ONCE;
2.3.2. Triggering the actuator node attached to the second set of sensors:
If we want to trigger the actuator attached (actuatornode2 only) to the second set of sensors – PIR
motion detector and PIR temperature sensor with the same threshold conditions (pir_temperature>75,
pir_motion_detector<20) to trigger one(1) wireless IP camera to start recording the scene of the oil field, we will
use the following tinydb SQL commands to accomplish that:
SET act.actuatornode2=’on’
WHERE (nodeid=5 AND pir_temperature>75) AND (nodeid=4 AND
pir_motion_detector<20)
ONCE;
The resultant output from the query above will invoke the Wireless IP camera actuator to start it for
video recording of the oil field scene once the thresholds values of temperature and motion detector sensors are
breached.
2.3.3. Sampling and data acquisition of the sensors data individually:
Suppose we want to sample continuously each particular sensor (using periodic monitoring/actuation)
installed in the remote oil field, we will use the following tinydb SQL to query the sensed data of pressure
sensor at any time:
SELECT nodeid, pressure
FROM sensors
WHERE nodeid=1
SAMPLE PERIOD 10s;

This will sample only the pressure sensor and acquire the sensed data (sensordata1) from it at every 10
seconds time interval.
If we want to sample the vibration sensor to detect vandalisation of pipeline before it occurs using
vibration threshold of say 22, we will use the following tinydb SQL query to query the sensors table:
SELECT nodeid,vibration
FROM sensors
WHERE nodeid=2
SAMPLE PERIOD 1s;
This will sample only the vibration sensor and acquire the sensed data (sensordata2) from it at every 1
second time interval.
It is better to combine inputs from multiple sensors such as pressure, vibration, flowrate, PIR motion
detector and PIR temperature sensor in an oil and gas field so as to detect incipient leakage earlier and more
accurately rather than input from single sensor which may indicate false information that there is leakage or
vandalisation when in actual sense it is not.
3. CONCLUSIONS AND FUTURE WORK
Sensed data from the installed quantitative and qualitative sensors in the oil and gas field can be
transmitted from the oil field to a wireless Base Station and then to the Control Gateway and the sensed/actuated
data passed to a DBMS server during data sampling and acquisition. This paper considered SQL primitives for
handling data sampling and acquisition of remote sensed data from the oil field using Tinydb. Tinydb is easy for
database abstraction for resource constrained embedded devices such as wireless sensors. Considering actuators
as part of the data model in the database abstraction is convenient. SELECT query can be used to sample and
perform data acquisition of sensed data from environmental quantitative sensors only while UPDATE query can
be used to perform the combined sensing and actuation tasks in the network to handle the triggering of wireless
IP cameras to start recording video scenes of the particular oil and gas fields in order to detect the biometric
identities of the vandals. Executing actuation queries need more research to handle node movements, node
failures, etc.
3.1. Future Work
We intend to carry out further works in the following area:
1. To design a client-server paradigm to sampling and data acquisition of remote data from the oil fields.
2. To develop scripts (programs) using server-side programming language to implement the server-side
processing,
3. To develop command statements (BaseStationListener) to listen to data packets from the wireless
BaseStation to the WSAN Gateway computer or control PC.
4. To develop command statements (DBPush) to enable tinydb connection and storage/extraction from WSAN
Gateway computer or control PC to the Tinydb Server.
5. To develop command statements (Supervisor) to control and supervise all other scripts.
6. To develop scripts in server-side to query sensor/actuator data in WSN gateway computer to the database
tinydb server.
7. To develop an experimental testbed and simulation model to implement and test the proposed framework.
REFERENCES
[1] I.F.Akyildiz, W.Su, Y.Sankarasubramaniam and E.Cayirci, “A Survey on Wireless Networks”, IEEE Communications
Magazine, 2002, pp.102-114.
[2] S.Petersen, P.Doyle, S.Vatland, C.S.Aasland, T.C.Andersen and D.Sjong, “Requirements, Drivers and Analysis of Wireless
Sensor Network Solutions for Oil and Gas Industry”, IEEE Communications Magazine, 2007, pp.219.
[3] G.Sharma, S.Bala, A.K.Verma and T.Singh, “Security in Wireless Sensor Networks using Frequency Hopping”, International
Journal of Computer Applications (0975-8887), 2012, pp.1.
[4] C. Bisdikian (2012). “An Overview of the Bluetooth Wireless Technology”, IEEE Communication Magazine, vol.39, 2012.
[5] C.O. Iwendi and A.R Allen, “Wireless Sensor Network Nodes: Security and Deployment in Niger-Delta Oil and Gas Sector”,
International Journal of Network Security and Its Applications (IJNSA), Vol.3, No.1, 2011, pp.68.
[6] T.Fasasi, D. Maynard and H.Nasr , “Sensors remotely monitor wells in Nigeria swamps”, Oil and Gas Journal, 2005, pp.2.
[7] A. Sayakkara, M.D.J.S Goonetillake and K.D. Zoysa, “Declarative Interface for In-network Actuation on Wireless Sensor-Actuator
Networks”, Sustainable Computing Research Group (SCoRe), University of Colombo School of Computing, Sri Lanka. pp.6.

[8] J.G.Bhatt (2007) “Wireless Networking Technologies for Automation in Oil and Gas Sector”, Electrical Engineering
Department Indian Institute of Technology Roorkee, India, pp.15.
[9] L. Mottola and G.P. Picco, “Programming Wireless Sensor Networks: Fundamental Concepts and State of the Art”, University of
Trento, Italy, pp.9.
[10] L. Mottola and G.P. Picco, “Programming Wireless Sensor Networks: Fundamental Concepts and State of the Art”, University of
Trento, Italy, pp.18.
[11] A. Sayakkara, M.D.J.S Goonetillake and K.D. Zoysa, “Declarative Interface for In-network Actuation on Wireless Sensor-Actuator
Networks”, Sustainable Computing Research Group (SCoRe), University of Colombo School of Computing, Sri Lanka.
pp.11.
Authors Profiles
Engr. Fidelis C. Obodoeze is a Doctoral Research Student in the Department of Electronic and
Computer Engineering Nnamdi Azikiwe University Awka. He is currently lecturing Computer
Science and Engineering at Renaissance University Enugu, Nigeria. His PhD work is on
Security of Wireless Sensor Network (WSN) in Oil and Gas field monitoring Niger Delta
Region. He had his Masters Degree in Control Systems and Computer Engineering at Nnamdi
Azikiwe University in 2010 and B.Sc Degree in Computer Engineering at Obafemi Awolowo
University Ile-Ife in 2001. He has authored several conference and research journal publications. All
correspondence to
Engr. Frank Ekene Ozioko is the Director of ICT office Enugu State University of Science and
Technology (ESUT) and Lecturer Department of Computer and Information Science, ESUT,
Nigeria. He had several years of experience in university ICT administration and engineering as
well as in teaching and research.
Dr. Francis A. Okoye is a lecturer and former Head, Department of Computer Science and
Engineering Enugu State University of Science and technology (ESUT), Nigeria. He had his Ph.D
in Computer Science in 2008 at Ebonyi State University Abakaliki, Nigeria. He obtained his MSc.
and BEng. in Computer Science and Engineering at Enugu State University of Science and
Technology (ESUT), Nigeria in 2001 and 1996 respectively. He has several years of experience in
both teaching and research.
Engr. ThankGod Izuchukwu Ozue is a Doctoral Research Student in the Department of
Electronic and Computer Engineering Nnamdi Azikiwe University Awka. He is currently
working as a Secuirty expert at Nyzpat Technologies Ltd. Port Harcourt, Nigeria. He had his
Masters Degree in Control Systems and Computer Engineering at Nnamdi Azikiwe University in
2010 and B.Eng Electrical and Electronic Engineering at Nnamdi Azikiwe University Awka in
2006. He has authored several conference and research journal publications.
Mr. Samuel Chibuzor Asogwa is a Ph.D research scholar in the Department of Computer Science
Nnamdi Azikiwe University Awka, Nigeria. He is currently lecturing at the Department of
Computer Science Michael Okpara University of Agriculture Umudike, Nigeria. He had his
Masters (MSc.) in Computer Science at Ebonyi State University Abakaliki, Nigeria in 2011 and
Bachelor of Engineering (BEng.) in Computer Science and Engineering at Enugu State University
of Science and Technology (ESUT), Nigeria in 1999. He was the former Acting Head of
Department of Computer Science, Renaissance University, Enugu, Nigeria. He has several years of teaching and
research experience.
Engr. Calista Nnenna Mba is a Lecturer and former Acting Head, Department of Computer
Engineering, Caritas University Enugu, Nigeria. She is currently pursuing her Ph.D programme in
Computer Science at Nnamdi Azikiwe University Awka, Nigeria. She had her MSc. Computer
Science at University of Nigeria Nsukka (UNN) in 2009, Nigeria and B.Eng in Computer Science
and Engineering at Enugu State University of Science and Technology (ESUT), Nigeria in 2004.

Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues and Database Abstraction

More Related Content

What's hot (20)

Similar to Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues and Database Abstraction (20)

More from International Journal of Engineering Inventions www.ijeijournal.com (20)

Recently uploaded (20)

Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues and Database Abstraction