SlideShare a Scribd company logo
ENGINEERING WORKSHOP PRACTICES
SEMESTER-II
CARPENTRY
By
MISHINI ANIL
DEPARTMENT OF MECHANICAL ENGINEERING
MCET ABIDS HYDERABAD
DATE-30/04/2021
CARPENTRY
bridges, concrete formwork, etc.
Strictly speaking, carpentry deals with all works of a carpentry such
as roofs, floors, partitions, etc. of a building.
Another terms joinery deals with the making of doors, windows,
stairs and all interior fitments for a building. carpentry shop deals
with the timber, various types of tools and the art of joinery.
 Timber and wood
Timber is the basic material used for any class of wood working. The term
timber is applied to the trees which provide us with wood.
 What is carpentry?
is a skilled trade and a craft in which the primary work
is the cutting, shaping
Carpentry
performed
materials
and installation of building
during the construction of buildings, ships, timber
2
Hard and soft wood
3
 Exogenous types are also known as outward growing trees which produce
timber for commercial use.
 Endogenous trees are also known as inward growing.
(a) Natural seasoning
 Seasoning of wood
Advantages:
 Lighter in weight
 More resilient
 Less liable to twist, warp and split
 Strength, hardness and stiffness increases
(b) Artificial s4easoning
 CARPENTRY TOOL
1. Marking and measuring tool
2. Cutting tool
3. Planning tool
4. Boring tool
5. Striking tool
6. Holding and miscellaneous tool
 Defects in timber
knot
5
1. Marking and measuring tools
(a) Rules (0-60 cm)
Steel rule
Foldable rule
Flexible steel rule 6
(b) Try square (used for marking and testing angles of 90)
Stock
Blade (150 to 300 mm)
(c) Mitre square
 Used to measure an angle of 45
 Maximum blade length 300 mm
7
(d) Combination square
Square head
Centre head
Rule/blade
Protractor head
8
9
2. Cutting tool
10
(b) Rip saw: used for cutting along the grain in thick wood
 used for cutting along the grain in thick wood
 Made of high grade tool steel
 About 700 mm long
 3 to 5 points or teeth per 25 mm
(a) Adze
 used for rough cutting, squaring, to
chop inside curves and to produce concave surfaces
 Its outer face is convex, inner face concave and edge is bevelled to form
a cutting edge
 It is made of carbon steel.
(c) cross-cut saw (hand saw)
 Used for cutting across the grain in thick wood
 600 to 650 mm long
 8 to 10 teeth per 25 mm
(d) Panel saw
 500 mm long
 10 to 12 teeth per 25 mm
 It has finer blade & mostly used for fine work
11
(e) Tenon or back saw
 Used for cross cutting when finer and more accurate finish is
required
 250 to 400 mm long
 13 teeth per 25 mm equilateral triangle shaped teeth
sometimes called “peg” teeth
(f) Dovetail saw
 A smaller version of Tenon
 Used where high accuracy needed
 200 to 350 mm long
 12 to 18 teeth per 25 mm
12
(g) Bow saw
 Narrow blade used
 The blade is held in tension by twisting the string with a smaller
wooden lever
 Used for cutting quick curve
13
(h) Coping saw
 Similar blade as bow saw
 The blade is tensioned by screwing the handle
 Used for cut small radius curve
(i) Compass saw
 Narrow tapering blade
 250to 400 mm long
 Used for sawing small curve in confined space
(j) Pad or keyhole saw
 Smallest saw
 250 mm long
 Used for interior cuts or cutting key holes
14
CHISEL
15
(a) Firmer chisel
 Most useful for general purposes used by hand pressure or mallet
 Flat blade about 125mm long
 Width varies from 1.5-50 mm
(b) Bevelled edge firmer chisel
 Used for more delicate and fine work
 Useful for getting into corner where the ordinary firmer chisel would
be clumsy
(c) Paring chisel
 Both firmer and bevelled edge chisels when they are made with
long thin blades are known as pairing chisel
(d) Mortise chisel
 Used for chopping out mortices
 Very nearly square in cross section
 Withstand heavy blows from a mallet
(e) Gouges
 Chisel with curved section
 Inside or outside grounded
 Inside grounded gouges are called scribing gauges
 Outside ground gouges are called firmer gouges
16
3.Planning tool
Jack planes Smoothing plane
Trying plane
Rabbet plane
17
Rabbet plane
Blade-2
Blade-1
18
Spokeshave plane
 Spokeshave a wood shaving tool used for
fine finishing. Its small bearing surface makes
it perfect for shaping edged work and fine
tuning curves.
19
 Router plane is a plane used for smoothing out sunken panels, and more generally
for all depressions below the general surface of the pattern. It planes the bottoms of
recesses to a uniform depth and can work into corners that otherwise can only be
reached with a chisel.
20
4. Boring tool
Used to make round holes in wood.
21
 Types of bits
 Gimlet
 Bradawl
 Auger
Bradawl and Gimlet
Chuck
Bull wheel
Handle
Handle
Head
Jaw
Ratchet
Lever
Wheel brace
Ratchet br2a2ce
5. Striking tool
23
(a) Mallet
 Wooden-headed hammer of round or rectangular cross-section
 Used for giving light blows to the cutting tool like chisels and gouges
(b) Warrington hammer
The face of hammer is hardened, tempered
and ground slightly convex
 The handle is made of wood
and is oval in cross-section to have a comfortable grip
The head is forged from tool steel and is obtainable in
various weights.
(a) Claw hammer
6. Holding & supporting tool
(a) Work bench
24
(b) Carpenter vice
Jaw
Trigger for quick opening
25
(c) Bar clamp
 Clamps are commonly used
in pairs in gluing up
operations at the final
assembly of wood joinery
work
 Both jaws of the sash
clamp are generally made
of malleable cast iron
which is tougher and less
brittle than ordinary cast
iron
26
(d) G or C clamp
27
6. Miscellaneous tools
(a) Raps and files : used for cleaning up some curved surface
28
(b) Scraper and Glass-paper
(c) Pincer
29
CARPENTRY PROCESSES
30
 Marking
 Sawing
 Planning
 Chiselling
 Boring
 Grooving
 Rebating
 Moulding
COMMOM WOOD JOINTS
31
(a) (b)
(c) (d)
(e)
(f)
(g) (h)
32
(i) Dowel joint
(j)
33
EXPERIMENT - 01
CARPENTRY: SAWING AND GROOVING
AIM:
To make Sawing and Grooving experiment from the given wood piece.
MATERIAL REQUIRED:
Teak wood piece of size 50 X 30 X 125 mm – 1 piece
TOOLS REQUIRED:
Governor setup, Carpenter’s vice, Steel Rule, Jack plane, Try-square, Marking Gauge, Firmer
Chisel, Cross-cut Saw, Tenon- Saw, Scriber, Wooden Mallet and Wood rasp File.
PROCEDURE:
1. The given wood piece is checked to confirm size as per sketch given.
2. The wood piece is firmly fixed in the carpenter’s vice and any two adjacent faces are
planned by jack plane and the two other faces are checked for the squareness using the try-
square.
3. Making gauge is set and lines are drawn as per sketch given respectively.
4.Using the cross cut saw the portions to be removed are cut in the wood piece.
5. Followed by chiselling the unwanted wood material can be removed.
6. A fine finishing is given by using wood rasp file.
Precautions:
1. Do not use firmer chisel without handle.
2. Do not put finger on cutting edge of chisel and Saw.
RESULT & CONCLUSION:
The Sawing and Grooving experiment is thus made by following the above sequence
of operations.
Carpentry updated ppt
EXPERIMENT - 02
CARPENTRY: T- LAP JOINT
AIM:
To make a T- LAP JOINT as shown in the figure from the given reaper.
MATERIAL REQUIRED:
Teak wood piece of size 50 X 30 X 125 mm – 2 pieces
TOOLS REQUIRED:
Governor setup, Carpenter’s vice, Steel Rule, Jack plane, Try-square, Marking Gauge,
Firmer Chisel, Cross-cut Saw, Tenon- Saw, Scriber, Wooden Mallet and Wood rasp File.
PROCEDURE:
1. The given reaper is checked to ensure its correct size.
2. The reaper is firmly clamped in the carpenter’s vice and any two adjacent faces are
planed by the jack plane and the two faces are checked for squareness with try-square.
3. Marking gauge is set and lines are drawn at 24 and 45mm to mark the thickness and
width of the model respectively.
4. The excess material is first chiselled out with firmer chisel an then planned to correct
size.
5.The mating dimensions of the parts X and Y are then marked using scale and
marking gauge.
6. Using the cross cut saw, the portions to be removed are cut in both the pieces,
followed by chiselling.
7. The ends of both the parts are chiselled and filed by wood rasp file to the exact
length.
8. A fine finishing is given to the parts, if required so that proper fitting is obtained.
9. The parts are fitted to obtain a straight tight joint.
Precautions:
1. Do not use firmer chisel without handle.
2. Do not put finger on cutting edge of chisel and Saw.
RESULT & CONCLUSION:
The T-Lap Joint is thus made by following the above sequence of operations.
Carpentry updated ppt
EXPERIMENT - 03
CARPENTRY: DOVETAIL LAP JOINT
AIM:
To make a Dovetail Lap joint experiment from the given wood piece.
MATERIAL REQUIRED:
Teak wood piece of size 50 X 30 X 125 mm – 2 pieces
TOOLS REQUIRED:
Governor setup, Carpenter’s vice, Steel Rule, Jack plane, Try-square, Marking Gauge,
Firmer Chisel, Cross-cut Saw, Tenon- Saw, Scriber, Wooden Mallet and Wood rasp File.
PROCEDURE:
1. The given wood pieces are checked to confirm size as per sketch given.
2. The wood piece is firmly fixed in the carpenter’s vice and any two adjacent faces are
planned by jack plane and the two other faces are checked for the squareness using
the try-square.
3. Making gauge is set and lines are drawn at 24 and 48mm, to mark the thickness and
width of the model respectively.
4. The portions to be removed in both male and female pieces can be cut by using the
cross cut saw, followed by chiselling.
5. A fine finishing is given by using wood rasp file.
6. The ends of both parts are chiselled and filed by Wood rasp file.
7. A fine finishing is given to the parts, if required so that, proper fitting is obtained.
8. The parts are fitted to obtain a slightly tight joint.
Precautions:
1. Do not use firmer chisel without handle.
2. Do not put finger on cutting edge of chisel and Saw.
RESULT & CONCLUSION:
The T-Lap Joint is thus made by following the above sequence of operations.
Carpentry updated ppt
Carpentry updated ppt
Carpentry updated ppt

More Related Content

PPTX
Carpentry
PDF
Carpentry
PPT
Table saw safety
PPTX
Modulation
PPTX
CARPENTRY .pptx
PPTX
Bread and Pastry
PPTX
Carpentry shop
PPTX
Methods of Cooking
Carpentry
Carpentry
Table saw safety
Modulation
CARPENTRY .pptx
Bread and Pastry
Carpentry shop
Methods of Cooking

What's hot (20)

PPTX
carpentry tools
PPTX
Woodworking
PPTX
Carpentry
PPTX
CARPENTRY TOOLS
PPTX
Fabricate Formworks.pptx
PPTX
BOARD FOOT.pptx
DOCX
Staking out building lines
PDF
Wood working | History & Tools
PPTX
BASIC DRAFTING
PDF
Introduction to carpentry and joinery
PPTX
Carpentry Tools
PPT
Basic Hand Tools for Carpentry Work
PPTX
Workshop practice i
PPTX
TLE-7-CARPENTRY-QUARTER-3-MODULE-6.pptx
PPT
Tool cleaning, storage, and maintenance
PDF
Tools and equipment
PPTX
Performing Basic Preventive Maintenance.pptx
PPTX
dressmaking week 7.pptx
PPTX
Tle review-drafting-carpentry-masonry-plumbing-electricity
DOCX
TLE : carpentry and masonry
carpentry tools
Woodworking
Carpentry
CARPENTRY TOOLS
Fabricate Formworks.pptx
BOARD FOOT.pptx
Staking out building lines
Wood working | History & Tools
BASIC DRAFTING
Introduction to carpentry and joinery
Carpentry Tools
Basic Hand Tools for Carpentry Work
Workshop practice i
TLE-7-CARPENTRY-QUARTER-3-MODULE-6.pptx
Tool cleaning, storage, and maintenance
Tools and equipment
Performing Basic Preventive Maintenance.pptx
dressmaking week 7.pptx
Tle review-drafting-carpentry-masonry-plumbing-electricity
TLE : carpentry and masonry
Ad

Similar to Carpentry updated ppt (20)

DOC
Manufacturing Practice (MP) Training Project
PPTX
carpentry shop .pptx
PPTX
carpenty m1 tools.pptx CARPENTRY TOOLS S
PPTX
WT ECET PPT (SURYA).pptx
PPTX
WMP CARPENTARY SHOP workshop manufacturing practices.pptx
PPTX
WORKSHOP MANUFACTURING PRACTICES LECTURE 6 WMP.pptx
PDF
cutting tool of engineering department.pdf
PPTX
Wood Working on Circular Saw Planer Machine.pptx
PPT
Sheet metal Fundamentals
PPT
Manufacturing Engineering,Sheet Metal Forming
PDF
Ch-5 Sheet Metal Operation.pdf
PDF
Sheet metal working 1
PDF
Carpen tools
DOCX
workshop.docx
PPTX
Ch 5 drilling sk mondal
PDF
ACE305: Aircraft Components Design and Manufacture
PPTX
Sheet Metworking-1.pptx
PPTX
THEORY OF METAL MACHINING.pptx
PPTX
Sheet metal theory
PDF
Sheetmetaloperations 6 part a
Manufacturing Practice (MP) Training Project
carpentry shop .pptx
carpenty m1 tools.pptx CARPENTRY TOOLS S
WT ECET PPT (SURYA).pptx
WMP CARPENTARY SHOP workshop manufacturing practices.pptx
WORKSHOP MANUFACTURING PRACTICES LECTURE 6 WMP.pptx
cutting tool of engineering department.pdf
Wood Working on Circular Saw Planer Machine.pptx
Sheet metal Fundamentals
Manufacturing Engineering,Sheet Metal Forming
Ch-5 Sheet Metal Operation.pdf
Sheet metal working 1
Carpen tools
workshop.docx
Ch 5 drilling sk mondal
ACE305: Aircraft Components Design and Manufacture
Sheet Metworking-1.pptx
THEORY OF METAL MACHINING.pptx
Sheet metal theory
Sheetmetaloperations 6 part a
Ad

Recently uploaded (20)

PDF
The CXO Playbook 2025 – Future-Ready Strategies for C-Suite Leaders Cerebrai...
PPTX
Sustainable Sites - Green Building Construction
PPTX
Engineering Ethics, Safety and Environment [Autosaved] (1).pptx
PPTX
Recipes for Real Time Voice AI WebRTC, SLMs and Open Source Software.pptx
PPTX
Lecture Notes Electrical Wiring System Components
PPTX
IOT PPTs Week 10 Lecture Material.pptx of NPTEL Smart Cities contd
PDF
BMEC211 - INTRODUCTION TO MECHATRONICS-1.pdf
PPTX
MCN 401 KTU-2019-PPE KITS-MODULE 2.pptx
PDF
Mohammad Mahdi Farshadian CV - Prospective PhD Student 2026
PPTX
M Tech Sem 1 Civil Engineering Environmental Sciences.pptx
PPTX
Geodesy 1.pptx...............................................
PPTX
CYBER-CRIMES AND SECURITY A guide to understanding
PDF
Automation-in-Manufacturing-Chapter-Introduction.pdf
PPTX
Infosys Presentation by1.Riyan Bagwan 2.Samadhan Naiknavare 3.Gaurav Shinde 4...
PDF
R24 SURVEYING LAB MANUAL for civil enggi
PPTX
web development for engineering and engineering
PPTX
FINAL REVIEW FOR COPD DIANOSIS FOR PULMONARY DISEASE.pptx
PPTX
CH1 Production IntroductoryConcepts.pptx
PDF
PPT on Performance Review to get promotions
PDF
composite construction of structures.pdf
The CXO Playbook 2025 – Future-Ready Strategies for C-Suite Leaders Cerebrai...
Sustainable Sites - Green Building Construction
Engineering Ethics, Safety and Environment [Autosaved] (1).pptx
Recipes for Real Time Voice AI WebRTC, SLMs and Open Source Software.pptx
Lecture Notes Electrical Wiring System Components
IOT PPTs Week 10 Lecture Material.pptx of NPTEL Smart Cities contd
BMEC211 - INTRODUCTION TO MECHATRONICS-1.pdf
MCN 401 KTU-2019-PPE KITS-MODULE 2.pptx
Mohammad Mahdi Farshadian CV - Prospective PhD Student 2026
M Tech Sem 1 Civil Engineering Environmental Sciences.pptx
Geodesy 1.pptx...............................................
CYBER-CRIMES AND SECURITY A guide to understanding
Automation-in-Manufacturing-Chapter-Introduction.pdf
Infosys Presentation by1.Riyan Bagwan 2.Samadhan Naiknavare 3.Gaurav Shinde 4...
R24 SURVEYING LAB MANUAL for civil enggi
web development for engineering and engineering
FINAL REVIEW FOR COPD DIANOSIS FOR PULMONARY DISEASE.pptx
CH1 Production IntroductoryConcepts.pptx
PPT on Performance Review to get promotions
composite construction of structures.pdf

Carpentry updated ppt

  • 1. ENGINEERING WORKSHOP PRACTICES SEMESTER-II CARPENTRY By MISHINI ANIL DEPARTMENT OF MECHANICAL ENGINEERING MCET ABIDS HYDERABAD DATE-30/04/2021
  • 2. CARPENTRY bridges, concrete formwork, etc. Strictly speaking, carpentry deals with all works of a carpentry such as roofs, floors, partitions, etc. of a building. Another terms joinery deals with the making of doors, windows, stairs and all interior fitments for a building. carpentry shop deals with the timber, various types of tools and the art of joinery.  Timber and wood Timber is the basic material used for any class of wood working. The term timber is applied to the trees which provide us with wood.  What is carpentry? is a skilled trade and a craft in which the primary work is the cutting, shaping Carpentry performed materials and installation of building during the construction of buildings, ships, timber 2
  • 3. Hard and soft wood 3  Exogenous types are also known as outward growing trees which produce timber for commercial use.  Endogenous trees are also known as inward growing.
  • 4. (a) Natural seasoning  Seasoning of wood Advantages:  Lighter in weight  More resilient  Less liable to twist, warp and split  Strength, hardness and stiffness increases (b) Artificial s4easoning
  • 5.  CARPENTRY TOOL 1. Marking and measuring tool 2. Cutting tool 3. Planning tool 4. Boring tool 5. Striking tool 6. Holding and miscellaneous tool  Defects in timber knot 5
  • 6. 1. Marking and measuring tools (a) Rules (0-60 cm) Steel rule Foldable rule Flexible steel rule 6
  • 7. (b) Try square (used for marking and testing angles of 90) Stock Blade (150 to 300 mm) (c) Mitre square  Used to measure an angle of 45  Maximum blade length 300 mm 7
  • 8. (d) Combination square Square head Centre head Rule/blade Protractor head 8
  • 9. 9
  • 10. 2. Cutting tool 10 (b) Rip saw: used for cutting along the grain in thick wood  used for cutting along the grain in thick wood  Made of high grade tool steel  About 700 mm long  3 to 5 points or teeth per 25 mm (a) Adze  used for rough cutting, squaring, to chop inside curves and to produce concave surfaces  Its outer face is convex, inner face concave and edge is bevelled to form a cutting edge  It is made of carbon steel.
  • 11. (c) cross-cut saw (hand saw)  Used for cutting across the grain in thick wood  600 to 650 mm long  8 to 10 teeth per 25 mm (d) Panel saw  500 mm long  10 to 12 teeth per 25 mm  It has finer blade & mostly used for fine work 11
  • 12. (e) Tenon or back saw  Used for cross cutting when finer and more accurate finish is required  250 to 400 mm long  13 teeth per 25 mm equilateral triangle shaped teeth sometimes called “peg” teeth (f) Dovetail saw  A smaller version of Tenon  Used where high accuracy needed  200 to 350 mm long  12 to 18 teeth per 25 mm 12
  • 13. (g) Bow saw  Narrow blade used  The blade is held in tension by twisting the string with a smaller wooden lever  Used for cutting quick curve 13
  • 14. (h) Coping saw  Similar blade as bow saw  The blade is tensioned by screwing the handle  Used for cut small radius curve (i) Compass saw  Narrow tapering blade  250to 400 mm long  Used for sawing small curve in confined space (j) Pad or keyhole saw  Smallest saw  250 mm long  Used for interior cuts or cutting key holes 14
  • 15. CHISEL 15 (a) Firmer chisel  Most useful for general purposes used by hand pressure or mallet  Flat blade about 125mm long  Width varies from 1.5-50 mm (b) Bevelled edge firmer chisel  Used for more delicate and fine work  Useful for getting into corner where the ordinary firmer chisel would be clumsy (c) Paring chisel  Both firmer and bevelled edge chisels when they are made with long thin blades are known as pairing chisel
  • 16. (d) Mortise chisel  Used for chopping out mortices  Very nearly square in cross section  Withstand heavy blows from a mallet (e) Gouges  Chisel with curved section  Inside or outside grounded  Inside grounded gouges are called scribing gauges  Outside ground gouges are called firmer gouges 16
  • 17. 3.Planning tool Jack planes Smoothing plane Trying plane Rabbet plane 17
  • 19. Spokeshave plane  Spokeshave a wood shaving tool used for fine finishing. Its small bearing surface makes it perfect for shaping edged work and fine tuning curves. 19
  • 20.  Router plane is a plane used for smoothing out sunken panels, and more generally for all depressions below the general surface of the pattern. It planes the bottoms of recesses to a uniform depth and can work into corners that otherwise can only be reached with a chisel. 20
  • 21. 4. Boring tool Used to make round holes in wood. 21  Types of bits  Gimlet  Bradawl  Auger Bradawl and Gimlet
  • 23. 5. Striking tool 23 (a) Mallet  Wooden-headed hammer of round or rectangular cross-section  Used for giving light blows to the cutting tool like chisels and gouges (b) Warrington hammer The face of hammer is hardened, tempered and ground slightly convex  The handle is made of wood and is oval in cross-section to have a comfortable grip The head is forged from tool steel and is obtainable in various weights. (a) Claw hammer
  • 24. 6. Holding & supporting tool (a) Work bench 24
  • 25. (b) Carpenter vice Jaw Trigger for quick opening 25
  • 26. (c) Bar clamp  Clamps are commonly used in pairs in gluing up operations at the final assembly of wood joinery work  Both jaws of the sash clamp are generally made of malleable cast iron which is tougher and less brittle than ordinary cast iron 26
  • 27. (d) G or C clamp 27
  • 28. 6. Miscellaneous tools (a) Raps and files : used for cleaning up some curved surface 28
  • 29. (b) Scraper and Glass-paper (c) Pincer 29
  • 30. CARPENTRY PROCESSES 30  Marking  Sawing  Planning  Chiselling  Boring  Grooving  Rebating  Moulding
  • 34. EXPERIMENT - 01 CARPENTRY: SAWING AND GROOVING AIM: To make Sawing and Grooving experiment from the given wood piece. MATERIAL REQUIRED: Teak wood piece of size 50 X 30 X 125 mm – 1 piece TOOLS REQUIRED: Governor setup, Carpenter’s vice, Steel Rule, Jack plane, Try-square, Marking Gauge, Firmer Chisel, Cross-cut Saw, Tenon- Saw, Scriber, Wooden Mallet and Wood rasp File. PROCEDURE: 1. The given wood piece is checked to confirm size as per sketch given. 2. The wood piece is firmly fixed in the carpenter’s vice and any two adjacent faces are planned by jack plane and the two other faces are checked for the squareness using the try- square. 3. Making gauge is set and lines are drawn as per sketch given respectively.
  • 35. 4.Using the cross cut saw the portions to be removed are cut in the wood piece. 5. Followed by chiselling the unwanted wood material can be removed. 6. A fine finishing is given by using wood rasp file. Precautions: 1. Do not use firmer chisel without handle. 2. Do not put finger on cutting edge of chisel and Saw. RESULT & CONCLUSION: The Sawing and Grooving experiment is thus made by following the above sequence of operations.
  • 37. EXPERIMENT - 02 CARPENTRY: T- LAP JOINT AIM: To make a T- LAP JOINT as shown in the figure from the given reaper. MATERIAL REQUIRED: Teak wood piece of size 50 X 30 X 125 mm – 2 pieces TOOLS REQUIRED: Governor setup, Carpenter’s vice, Steel Rule, Jack plane, Try-square, Marking Gauge, Firmer Chisel, Cross-cut Saw, Tenon- Saw, Scriber, Wooden Mallet and Wood rasp File. PROCEDURE: 1. The given reaper is checked to ensure its correct size. 2. The reaper is firmly clamped in the carpenter’s vice and any two adjacent faces are planed by the jack plane and the two faces are checked for squareness with try-square. 3. Marking gauge is set and lines are drawn at 24 and 45mm to mark the thickness and width of the model respectively. 4. The excess material is first chiselled out with firmer chisel an then planned to correct size.
  • 38. 5.The mating dimensions of the parts X and Y are then marked using scale and marking gauge. 6. Using the cross cut saw, the portions to be removed are cut in both the pieces, followed by chiselling. 7. The ends of both the parts are chiselled and filed by wood rasp file to the exact length. 8. A fine finishing is given to the parts, if required so that proper fitting is obtained. 9. The parts are fitted to obtain a straight tight joint. Precautions: 1. Do not use firmer chisel without handle. 2. Do not put finger on cutting edge of chisel and Saw. RESULT & CONCLUSION: The T-Lap Joint is thus made by following the above sequence of operations.
  • 40. EXPERIMENT - 03 CARPENTRY: DOVETAIL LAP JOINT AIM: To make a Dovetail Lap joint experiment from the given wood piece. MATERIAL REQUIRED: Teak wood piece of size 50 X 30 X 125 mm – 2 pieces TOOLS REQUIRED: Governor setup, Carpenter’s vice, Steel Rule, Jack plane, Try-square, Marking Gauge, Firmer Chisel, Cross-cut Saw, Tenon- Saw, Scriber, Wooden Mallet and Wood rasp File. PROCEDURE: 1. The given wood pieces are checked to confirm size as per sketch given. 2. The wood piece is firmly fixed in the carpenter’s vice and any two adjacent faces are planned by jack plane and the two other faces are checked for the squareness using the try-square. 3. Making gauge is set and lines are drawn at 24 and 48mm, to mark the thickness and width of the model respectively. 4. The portions to be removed in both male and female pieces can be cut by using the cross cut saw, followed by chiselling.
  • 41. 5. A fine finishing is given by using wood rasp file. 6. The ends of both parts are chiselled and filed by Wood rasp file. 7. A fine finishing is given to the parts, if required so that, proper fitting is obtained. 8. The parts are fitted to obtain a slightly tight joint. Precautions: 1. Do not use firmer chisel without handle. 2. Do not put finger on cutting edge of chisel and Saw. RESULT & CONCLUSION: The T-Lap Joint is thus made by following the above sequence of operations.