Ccna1v3 Mod09
- 1. CCNA 1 v3.0 Module 9 TCP/IP Protocol Suite and IP Addressing
- 2. Objectives Introduction to TCP/IP Internet addresses Obtaining an IP address
- 4. History and Future of TCP/IP The U.S. Department of Defense (DoD) created the TCP/IP reference model because it wanted a network that could survive any conditions. Some of the layers in the TCP/IP model have the same name as layers in the OSI model.
- 5. Application Layer Handles high-level protocols, issues of representation, encoding, and dialog control. The TCP/IP protocol suite combines all application related issues into one layer and en sures this data is properly packaged before passing it on to the next layer.
- 6. Application Layer Examples NFS Distributed file system protocol (SUN) that allows file access to a remote storage device across a network SNMP Monitor/control network device. Used to manage configurations, statistics, performance and security
- 7. Transport Layer Five basic services : Segmenting upper-layer application data Establishing end-to-end operations(Logical connection) Sending segments from one end host to another end host Ensuring data reliability (Sequence no, acknowledgements) Providing flow control
- 9. Internet Layer The purpose of the Internet layer is to send packets from a network node and have them arrive at the destination node independent of the path taken.
- 10. The IP Protocol is responsible for: Connectionless best effort delivery routing packets to remote hosts defining packets transferring data between the internet layer and the network access layer It provides control and messaging capabilities: eg. Ping, “Destination Unreachable” etc. ARP & RARP also act at the network layer (They relate MAC & IP addresses)
- 11. Network Access Layer The network access layer is concerned with all of the issues that an IP packet requires to actually make a physical link to the network media. It includes the LAN and WAN technology details, and all the details contained in the OSI physical and data link layers.
- 12. Comparing the OSI Model and TCP/IP Model
- 13. Similarities of the OSI and TCP/IP Models Both have layers . Both have application layers, though they include very different services . Both have comparable transport and network layers . Packet-switched, not circuit-switched, technology is assumed . Networking professionals need to know both models .
- 14. Differences of the OSI and TCP/IP Models TCP/IP combines the presentation and session layer into its application layer . TCP/IP combines the OSI data link and physical layers into one layer . TCP/IP appears simpler because it has fewer layers . TCP/IP transport layer using UDP does not always guarantee reliable delivery of packets as the transport layer in the OSI model does .
- 15. Internet Architecture Two computers, anywhere in the world, following certain hardware, software, protocol specifications, can communicate, reliably even when not directly connected. LANs are no longer scalable beyond a certain number of stations or geographic separation.
- 17. IP Addressing An IP address is a 32-bit sequence of 1s and 0s. To make the IP address easier to use, the address is usually written as four decimal numbers separated by periods. This way of writing the address is called the dotted decimal format.
- 18. Decimal and Binary Conversion
- 19. IPv4 Addressing Class E 1111 240-255
- 20. Class A, B, C, D, and E IP Addresses
- 21. Reserved IP Addresses Certain host addresses are reserved and cannot be assigned to devices on a network. An IP address that has binary 0s in all host bit positions is reserved for the network address. An IP address that has binary 1s in all host bit positions is reserved for the broadcast address.
- 22. Public and Private IP Addresses No two machines that connect to a public network can have the same IP address because public IP addresses are global and standardized. However, private networks that are not connected to the Internet may use any host addresses, as long as each host within the private network is unique. RFC 1918 sets aside three blocks of IP addresses for private, internal use. Connecting a network using private addresses to the Internet requires translation of the private addresses to public addresses using Network Address Translation (NAT).
- 23. Introduction to Subnetting To create a subnet address, a network administrator borrows bits from the host field and designates them as the subnet field.
- 24. IPv4 versus IPv6 IP version 6 (IPv6) has been defined and developed. IPv6 uses 128 bits rather than the 32 bits currently used in IPv4. IPv6 uses hexadecimal numbers to represent the 128 bits. IPv4
- 25. Obtaining an IP Address .
- 26. Obtaining an Internet Address Static addressing Each individual device must be configured with an IP address . Dynamic addressing Reverse Address Resolution Protocol (RARP) Bootstrap Protocol (BOOTP) Dynamic Host Configuration Protocol (DHCP) DHCP initialization sequence Function of the Address Resolution Protocol ARP operation within a subnet
- 27. Static Assignment of IP Addresses Each individual device must be configured with an IP address.
- 28. Reverse Address Resolution Protocol (RARP) What is my IP address? Destination 255.255.255.255 Source ???????? Destination FF-FF-FF-FF-FF-FF Source FE:ED:FD:23:44:EF RARP REQUEST MESSAGE IP HEADER MAC HEADER
- 29. BOOTP IP The Bootstrap Protocol (BOOTP) operates in a client / server environment and only requires a single packet exchange to obtain IP information. BOOTP packets can include the IP address, as well as the address of a router, the address of a server, and vendor-specific information.
- 30. Dynamic Host Configuration Protocol Allows a host to obtain an IP address using a defined range of IP addresses on a DHCP server. As hosts come online, contact the DHCP server , and request an address.
- 31. Address Resolution Protocol (ARP) Each device on a network maintains its own ARP table. A device that requires an IP and MAC address pair broadcasts an ARP request. If one of the local devices matches the IP address of the request, it sends back an ARP reply that contains its IP-MAC pair. If the request is for a different IP network, a router performs a proxy ARP. The router sends an ARP response with the MAC address of the interface on which the request was received, to the requesting host.