CentOS Linux Server Hardening

Linux Hardening
Securing your CentOS 6 server
Frédéric Jean
CTO
1
September 2016

2
• Network security (VLANs, IPS, firewalls, etc.)
• IT Processes around accesses, Deny all, only allow and use when needed
• Human factor (e.g. e-mailing password)
• In-house software development hardening (SQL injections, etc.)
• COTS configurations (MySQL, Apache, etc.)
• Physical server access (BIOS, GRUB, etc.)
• Providing Internet access from a server
Remember: OS hardening is
only a step in the right
direction…

3
• E.g. Do you really need X-window on a real-time system? (performance
and security issues)
• Installing unnecessary software also installs additional security flaws
• CentOS 6.8 minimal:
CentOS-6.8-x86_64-minimal.iso
(The minimal install iso media is an alternative install to the main CentOS-6.0 distribution and comes with a trimmed down,
preselected rpm list. However, it still runs off the standard installer, with all the regular features that one would expect from the main
distribution, except the rpm selection screen has been disabled)
http://centos.mirror.netelligent.ca/centos/6/isos/x86_64/
General rule:
Only install what is needed

4
• Step 1) Burn ISO and boot
• Step 2) Follow wizard and finish setup
• Step 3) Test server Internet connectivity
• Step 4) “yum update –y” and reboot
• Step 5) OS Hardening
• Step 6) Install/configure your software
• Step 7) Configure firewall
Installing CentOS 6.8 minimal

5
• Temporarily stop firewall
% service iptables stop
• Install some tools
% yum install sudo perl ntp crontabs sendmail wget –y
• Install EPEL repository
% wget http://fedora.mirror.nexicom.net/epel/6/x86_64/epel-release-6-8.noarch.rpm
% yum install epel-release-6-8.noarch.rpm -y
% yum repolist
...
repo id repo name status
base CentOS-6 - Base 6,346
epel Extra Packages for Enterprise Linux 6 - x86_64 8,029
extras CentOS-6 - Extras 6
updates CentOS-6 - Updates 820
First steps…

6
• Configure password, idle and timeout policies
% perl -npe 's/PASS_MAX_DAYS.*/PASS_MAX_DAYS 180/' -i /etc/login.defs
% perl -npe 's/PASS_MIN_LEN.*/PASS_MIN_LEN 8/' -i /etc/login.defs
% perl -npe 's/LOGIN_TIMEOUT.*/LOGIN_TIMEOUT 30/' -i /etc/login.defs
% perl -npe 's/PASS_WARN_AGE.*/PASS_WARN_AGE 7/' -i /etc/login.defs
(These defaults still can be overridden by chage or passwd commands)
% vi /etc/profile.d/security.sh
TMOUT=900
readonly TMOUT
export TMOUT
readonly HISTFILE
% chmod +x /etc/profile.d/security.sh
% vi /etc/ssh/sshd_config
ClientAliveInterval 900
ClientAliveCountMax 0
% service sshd restart
Configure users

7
• Manage user accounts
e.g. our scenario:
admsupp used by administrators / softsupp used
by application maintainers
% userdel shutdown
% userdel halt
% userdel games
% userdel operator
% userdel ftp
% userdel gopher
% groupadd support
% useradd admsupp -G support
% useradd softsupp -G support
% passwd admsupp
• Make sure no non-root accounts
have UID set to 0
% awk -F: '($3 == "0") {print}' /etc/passwd
Configure users (cont’d)

8
• Disable unneeded SSHD authentication methods
% sed -i 's/[#]*ChallengeResponseAuthentication.*no/ChallengeResponseAuthentication yes/g'
/etc/ssh/sshd_config
% sed -i 's/[#]*GSSAPIAuthentication.*yes/GSSAPIAuthentication no/g' /etc/ssh/sshd_config
• Disable direct root login
% sed -i 's/[#]*PermitRootLogin.*yes/PermitRootLogin no/g' /etc/ssh/sshd_config
• Only allow permitted users using a valid password
% echo 'AllowUsers softsupp admsupp' >> /etc/ssh/sshd_config
% sed -i 's/[#]*PermitEmptyPasswords.*/PermitEmptyPasswords no/g' /etc/ssh/sshd_config
• Change SSHD listening port (e.g. 4622 – choose your own port!)
% sed -i 's/[#]*Port 22/Port 4622/g' /etc/ssh/sshd_config
% /etc/init.d/sshd restart (then reconnect using « admsupp » on port 4622 and do % su - root)
Remote access configuration

9
• Configure Visudo
% visudo
# As an example, append the following line:
%support ALL=NOPASSWD:/etc/init.d/httpd start, /etc/init.d/httpd stop, /etc/init.d/httpd restart,
/sbin/services httpd restart
• Test it
% su – softsupp
% whoami
% sudo /etc/init.d/httpd restart
Specify what users can do
Credit to: http://xkcd.com/149

10
• Remove all non SSL based servers
% yum erase xinetd inetd tftp-server ypserv telnet-server rsh-server
• A sniffer can easily get your password
• All in and out communications should be encrypted whenever possible
• Use ssh, sftp, https, scp, etc.
Non-SSL software removal

11
• Verify listening network ports
% netstat –tulpn
• Verify currently installed packages,
examples:
% yum list installed | more
% yum remove <package>
% yum grouplist
% yum groupremove "X Window System"
• Disable unnecessary services
% chkconfig --list
% chkconfig <service name> off
% for i in rpcbind restorecond nfslock lldpad
fcoe rpcidmapd; do service $i stop;
chkconfig $i off; done
• Turn off IPv6 if not needed
% vi /etc/sysconfig/network-scripts/ifcfg-eth0
IPV6INIT=no
IPV6_AUTOCONF=no
Services & packages removal

12
• Prevent anybody but root to run cron or at tasks
% touch /etc/cron.allow
% chmod 600 /etc/cron.allow
% awk -F: '{print $1}' /etc/passwd | grep -v root > /etc/cron.deny
% touch /etc/at.allow
% chmod 600 /etc/at.allow
% awk -F: '{print $1}' /etc/passwd | grep -v root > /etc/at.deny
Prevent users to schedule
tasks

13
• Narrow down rights for system files and folders
% chmod 700 /root
% chmod 700 /var/log/audit
% chmod 740 /etc/rc.d/init.d/iptables
% chmod 740 /sbin/iptables
% chmod -R 700 /etc/skel
% chmod 600 /etc/rsyslog.conf
% chmod 640 /etc/security/access.conf
% chmod 600 /etc/sysctl.conf
Narrowing rights

14
• Identify unwanted SUID and SGID Binaries
% find / ( -perm -4000 -o -perm -2000 ) –print
% find / -path -prune -o -type f -perm +6000 –ls
• Identify world writable files
% find /dir -xdev -type d ( -perm -0002 -a ! -perm -1000 ) –print
• Identify orphaned files and folders
% find /dir -xdev ( -nouser -o -nogroup ) –print
Verifying file system

15
• Make your point on login
% cat >/etc/issue << EOF
USE OF THIS COMPUTER SYSTEM, AUTHORIZED OR UNAUTHORIZED, CONSTITUTES CONSENT
TO MONITORING OF THIS SYSTEM. UNAUTHORIZED USE MAY SUBJECT YOU TO CRIMINAL
PROSECUTION. EVIDENCE OF UNAUTHORIZED USE COLLECTED DURING MONITORING MAY BE
USED FOR ADMINISTRATIVE, CRIMINAL, OR OTHER ADVERSE ACTION. USE OF THIS SYSTEM
CONSTITUTES CONSENT TO MONITORING FOR THESE PURPOSES.
EOF
% cp /etc/issue /etc/ssh-banner
• Now configure SSHD
% sed -i 's/[#]*Banner.*/Banner /etc/ssh-banner/g' /etc/ssh/sshd_config
% service sshd restart
Welcome messages

16
• Sysctl is an interface for examining and dynamically changing parameters in the BSD and
Linux operating systems
• Edit sysctl.conf to optimize kernel parameters
(see http://www.mjmwired.net/kernel/Documentation/networking/ip-sysctl.txt for descriptions)
• ICMP Redirect
This is where an attacker uses either the ICMP "Time exceeded" or "Destination unreachable" messages. Both of these ICMP messages can cause a
host to immediately drop a connection. An attacker can make use of this by simply forging one of these ICMP messages, and sending it to one or
both of the communicating hosts. Their connection will then be broken. The ICMP "Redirect" message is commonly used by gateways when a host
has mistakenly assumed the destination is not on the local network. If an attacker forges an ICMP "Redirect" message, it can cause another host to
send packets for certain connections through the attacker's host.
Tune kernel parameters

17
• Synflood
A Synflood exploits a server by sending a flood of SYN packets, but ignoring the SYN/ACK that come back in response. When this happens, the connection goes into SYN_RCVD
state on the server, which is held open until it receives an ACK reply from the Client. If an ACK reply is never received, then it will go into TIME_WAIT state on the server, causing it
to be held open even longer. Imagine if a Client sent several hundred (or even thousands) of SYN packets, only to ignore the SYN/ACK reply. Generally, this form of attack targets
a particular service to exploit the built in connection limits built into most services. This type of attack will not generally cause a server to go out of memory, but will make the
service being targeted, usually Apache, go unresponsive.
Client [SYN] ---------------> Server
Client <----------- [SYN/ACK] Server
Client [ACK] ---------------> Server
• UDP Floods
UDP attacks are quite effective, as UDP is a state-less protocol. UDP just sends the traffic without the initial overhead of the three way handshake in TCP. In addition to no initial
overhead, UDP also has no verification that the packet was received. Normally, when you send a UDP packet with the "DNS Query" bit set to port 53 of a nameserver, it will reply
with DNS results if the nameserver is active. However, if you send a UDP packet to a port that doesn't have a service listening on it, the remote host will send back an ICMP
Destination Unreachable packet (http://en.wikipedia.org/wiki/ICMP_Destination_Unreachable). It does this for EACH and EVERY UDP packet sent. As floods go, you can imagine
sending a whole bunch of UDP packets would generate quite lot of return traffic, now that you don't need state.
Tune kernel parameters
(cont’d)

cat << 'EOF' >> /etc/sysctl.conf
# drop icmp redirects
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.all.secure_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.default.secure_redirects = 0
# double the syn backlog size
net.ipv4.tcp_max_syn_backlog = 2048
# ignore ping broadcasts
net.ipv4.icmp_echo_ignore_broadcasts = 1
# drop the source routing ability
net.ipv4.conf.all.accept_source_route = 0
# log packets destinated to impossible addresses
net.ipv4.conf.all.log_martians = 1
# ignore bogus icmp error responses
net.ipv4.icmp_ignore_bogus_error_responses = 1
(continuing on next slide…)
18Tune kernel parameters
(cont’d)

# drop packets that come in using a bad interface
# (they will be logged as martian)
net.ipv4.conf.all.rp_filter = 1
# don't send timestamps
#net.ipv4.tcp_timestamps = 0
# Kernel threads
kernel.threads-max = 163840
# Socket buffers
net.core.wmem_default = 655360
net.core.wmem_max = 5242880
net.core.rmem_default = 655360
net.core.rmem_max = 5242880
# netdev backlog
net.core.netdev_max_backlog = 4096
# Semafores
kernel.sem="250 32000 32 1024"
# Socket buckets
net.ipv4.tcp_max_tw_buckets = 163840
# Controls source route verification
net.ipv4.conf.all.rp_filter = 1
# Do not accept source route
net.ipv4.conf.all.accept_source_route = 0
# Increase port range
net.ipv4.ip_local_port_range = 2000 65000
EOF
19Tune kernel parameters
(cont’d)

20
• Make sure your server has the right time
set at any moment
Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched,
variable-latency data networks.
NTP uses Marzullo's algorithm and is designed to resist the effects of variable latency. NTP can usually maintain time to within tens of
milliseconds over the public Internet, and can achieve 1 millisecond accuracy in local area networks under ideal conditions.
% chkconfig ntpd on
% sed -i 's/^(s*)server(ss*[0123]).*/1server 2.north-america.pool.ntp.org/' /etc/ntp.conf
% /etc/init.d/ntpd start
% ln -sf /usr/share/zoneinfo/America/Montreal /etc/localtime
Network Time Protocol

21
Security-Enhanced Linux (SELinux) is a Linux feature that provides the mechanism for supporting
access control security policies, including United States Department of Defense-style mandatory
access controls, through the use of Linux Security Modules (LSM) in the Linux kernel.
• Enabled by default, should you disable it?
• Difficult to configure with some software, transparent with others, google
it first
• Disabling SELinux
% vi /etc/selinux/config
"SELINUX=disabled“
• Configuration files
See: http://selinuxproject.org/page/ConfigurationFiles
Security policies

22
Fail2ban scans log files (e.g. /var/log/apache/error_log) and bans IPs that show the malicious signs -- too many
password failures, seeking for exploits, etc. Generally Fail2Ban then used to update firewall rules to reject the IP
addresses for a specified amount of time, although any arbitrary other action (e.g. sending an email, or ejecting
CD-ROM tray) could also be configured. Out of the box Fail2Ban comes with filters for various services (apache,
curier, ssh, etc).
Ref: http://www.fail2ban.org
• Example, regex scanning for Asterisk PBX log files:
NOTICE.* .*: Registration from '.*' failed for '<HOST>' - Wrong password
• Check current bans:
% /usr/bin/fail2ban-client status ssh-iptables
Ban bad IPs

23
• Installation steps
% yum install fail2ban
% chkconfig fail2ban on
% vi /etc/fail2ban/jail.conf
[ssh-iptables]
enabled = true
filter = sshd
action = iptables[name=SSH, port=4622, protocol=tcp]
sendmail-whois[name=SSH, dest=support@yourdomain.com, sender=fail2ban@yourdomain.net]
logpath = /var/log/secure
maxretry = 5
% vi /etc/fail2ban/fail2ban.conf
logtarget = /var/log/fail2ban.log
% service fail2ban start
Ban bad IPs (cont’d)

24
Logwatch is a customizable log analysis system. Logwatch parses through your system's logs and
creates a report analyzing areas that you specify.
Ref: http://sourceforge.net/projects/logwatch/files/
• Too much information to consider manual analysis
• Sends daily e-mails to you
• Fail2ban & logwatch
Ref: http://sourceforge.net/projects/fail2ban/files/logwatch/
• Even get yesterday’s installed packages list
Log watching & reporting

% yum install logwatch -y
% vi /usr/share/logwatch/default.conf/logwatch.conf
MailTo = support@yourdomain.com
MailFrom = Logwatch@yourdomain.com
% crontab –e
0 5 * * * /usr/sbin/logwatch
25Log watching & reporting
(cont’d)

26
iptables is a user space application program that allows a system administrator to configure the tables provided by
the Linux kernel firewall (implemented as different Netfilter modules) and the chains and rules it stores. Different
kernel modules and programs are currently used for different protocols; iptables applies to IPv4, ip6tables to IPv6,
arptables to ARP, and ebtables to Ethernet frames
• Create a check list for your applications
• Create a shell script with all of your rules
• Start iptables service and run the script
% service iptables start
% ./myrules.sh
• Check applications connectivity
• Also configure your hardware firewall!
Firewall setup

cat > myrules.sh << EOF
#!/bin/bash
# Flush all current rules from iptables
iptables -F
# SSH (4622) - Don't lock ourselves out + Limit of 3 attempts
# per minute
iptables -A INPUT -p tcp --dport 4622 --syn -m limit --limit
1/m --limit-burst 3 -j ACCEPT
iptables -A INPUT -p tcp --dport 4622 --syn -j DROP
# Set default policies for INPUT, FORWARD and OUTPUT chains
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -P OUTPUT ACCEPT
# Set access for localhost
iptables -A INPUT -i lo -j ACCEPT
# Accept packets belonging to established and
# related connections
iptables -A INPUT -m state --state
ESTABLISHED,RELATED -j ACCEPT
# Make sure new incoming tcp connections are SYN
# packets; otherwise we need to drop them
iptables -A INPUT -p tcp ! --syn -m state --state
NEW -j DROP
# Drop packets with incoming fragments
iptables -A INPUT -f -j DROP
(continuing on next slide…)
27Firewall (cont’d)

# Drop incoming malformed XMAS packets
iptables -A INPUT -p tcp --tcp-flags ALL ALL -j DROP
# Drop all NULL packets
iptables -A INPUT -p tcp --tcp-flags ALL NONE -j DROP
# ICMP (PING) - Ping flood protection 1 per second
iptables -A INPUT -p icmp -m limit --limit 5/s
--limit-burst 5 -j ACCEPT
iptables -A INPUT -p icmp -j DROP
# Allow MySQL (port 3306) access
# from other servers
iptables -A INPUT -p tcp --dport 3306 -j ACCEPT
# Save settings
/sbin/service iptables save
# List rules
iptables -L -v
EOF
28Firewall (cont’d)

29
• Change the nb of available gettys as there too many available by default
% sed -i 's/1-6/1/g' /etc/sysconfig/init
% sed -i 's/1-6/1/g' /etc/init/start-ttys.conf
• Require root's password for single user mode
% echo "~~:S:wait:/sbin/sulogin" >> /etc/inittab
• Disable USB mass storage, if you're not using it in your environment
% echo "blacklist usb-storage" > /etc/modprobe.d/blacklist-usbstorage
• Once a server is up and running, root shouldn't be logging in directly except in emergency situations. These usually
require hands at the console, so that's the only place root should be allowed to log in
% echo "tty1" > /etc/securetty
• Update the system to use sha512 instead of md5 for password protection
% authconfig --passalgo=sha512 --update
Miscellaneous

30
• Regularly install the security patches
• Set your Outlook reminders
• Install yum plugin
% yum -y install yum-plugin-security
• Check and install security updates (cron them!)
% yum updateinfo summary
% yum --security check-update
% yum –y --security update
• CentOS ‘announce’ mailing list
http://lists.centos.org/mailman/listinfo/centos-announce
Going forward: security updates

31
To consider:
1. The only folks allowed near the server should be directly responsible for it.
2. Don't allow the system to boot from removable media as the default option
3. Require a bios password to change boot options. OS security doesn't matter much if your attacker brings their
own OS to the party.
4. Use a password for grub. All the security in the world is for nothing if someone can simply pass some
arguments to your loader and disable your security.
5. Require a password for single user mode. Same reason as above.
6. Most servers don't need usb storage devices. Disable the usb-storage driver if possible.
Server proximity security

32
Now that you have performed a basic hardening of your server, consider
going through the same exercise for what is currently installed in terms of
software
Think of Apache, MySQL, etc. they all require your attention!
Other softwares

6185-118, Boul. Taschereau,
Bur. 105 Brossard,
QC, Canada
J4Z 0E4
1.877.266.6410http://myowntelco.net/ support@myowntelco.net

CentOS Linux Server Hardening

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to CentOS Linux Server Hardening (20)

Recently uploaded (20)

CentOS Linux Server Hardening