CNC introduction and advantages and disadvantages
- 1. Topic : CNC INTRODUCTION AND ADVANTAGES AND DISADVANTAGES Represented by: 170140119009: CHAUHAN KANDARP 170140119026: KALE SHUBHAM M 170140119030: KARDANI DEEP R. 170140119031: KEVAT ASHLESH 170140119037: KOTHADIYA VARSHIK
- 2. Computer Numeric Control: • A system in which actions are controlled by the direct insertion of numerical data at some point. The system must automatically interpret at least some portion of this data.
- 3. Open Loop Systems: • Open loop systems have no access to the real time data about the performance of the system and therefore no immediate corrective action can be taken in case of system disturbance.
- 5. Close Loop Systems • In a close loop system, feed back devices closely monitor the output and any disturbance will be corrected in the first instance. Therefore high system accuracy is achievable.
- 6. Motion Control Systems • 1. Point-To-Point Control in CNC: Drilling of Three Holes in Flat Plate System moves to a location and performs an operation at that location (e.g., drilling) Also applicable in robotics
- 7. • 2. Continuous path control in CNC : • Also called contouring systems in machining. • System performs an operation during movement (e.g., milling and turning)
- 8. Elements of a CNC system • Input Device • Central Processing Unit/ Machine Control Unit • Machine Tool • Driving System • Feedback Devices • Display Unit
- 9. Machine axes • Machine axes are established according to the industry standard report EIA RS - 267A
- 10. Axes configuration X axes moves from right to left as you face the machine Y axes move toward and away from you The Z axes is the spindle movement up and down spindle . A move toward work is Z(-Z) A move away from work is Z(+ Z)
- 13. Advantages and Disadvantages of CNC • Advantages: High Repeatability and Precision e.g. Aircraft parts. Volume of production is very high. Complex contours/surfaces can be easily machined. Flexibility in job change, automatic tool settings, less scrap. More safe, higher productivity, better quality. Less paper work, faster prototype production, reduction in lead times.
- 14. • Disadvantages: Costly setup, skilled operators. Computer programming knowledge required. Maintenance is difficult.
- 15. THANK YOU