Compiler design

LECTURE NOTES
ON
COMPILER DESIGN
Prepared by
Sanchi Kaushik
Department of Information Technology
Noida Institute of Engineering & Technology

SYLLABUS
Compiler Design (3-0-0)
MODULE – 1
Introduction: Overview and phases of compilation.
Lexical Analysis: Non-deterministic and deterministic finite automata (NFA & DFA), regular
grammar, regular expressions and regular languages, design of a lexical analyzer as a DFA, lexical
analyser generator.
Syntax Analysis: Role of a parser, context free grammars and context free languages, parse trees and
derivations, ambiguous grammar.
Top Down Parsing: Recursive descent parsing, LL(1) grammars, non-recursive predictive parsing, error
reporting and recovery.
Bottom Up Parsing: Handle pruning and shift reduces parsing, SLR parsers and construction or SLR
parsing tables, LR(1) parsers and construction of LR(1) parsing tables, LALR parsers and construction
of efficient LALR parsing tables, parsing using ambiguous grammars, error reporting and recovery,
parser generator.
MODULE – 2
Syntax Directed Translation: Syntax directed definitions (SDD), inherited and synthesized attributes,
dependency graphs, evaluation orders for SDD, semantic rules, application of syntax directed
translation.
Symbol Table: Structure and features of symbol tables, symbol attributes and scopes.
Intermediate Code Generation: DAG for expressions, three address codes - quadruples and triples,
types and declarations, translation of expressions, array references, type checking and conversions,
translation of Boolean expressions and control flow statements, back patching, intermediate code
generation for procedures.
MODULE – 3
Run Time Environment: storage organizations, static and dynamic storage allocations, stack
allocation, handlings of activation records for calling sequences.
Code Generations: Factors involved, registers allocation, simple code generation using stack
allocation, basic blocks and flow graphs, simple code generation using flow graphs.
Elements of Code Optimization: Objective, peephole optimization, concepts of elimination of local
common sub-expressions, redundant and un-reachable codes, basics of flow of control optimization.

CONTENTS
Introduction to compiler & its phases
Overview of language processing system
Phases of a Compiler
Languages
Converting RE to NFA (ThomsonConstruction)
Lexical Analysis
Lexical Analyzer Generator
Basics of Syntax Analysis
Context-Free Grammar
Left Recursion
YACC
Top-down Parsing
Recursive Predictive Parsing
Non-recursive Predictive Parsing-LL(1)
LL(1) Grammar
Basics of Bottom-up parsing
Conflicts during shift-reduce parsing
Operator precedence parsing
LR Parsing
Construction of SLR parsing table
Construction of canonical LR(0) collection
Shift-Reduce & Reduce-Reduce conflicts
Construction of canonical LR(1) collection
Construction of LALR parsing table
Using ambiguous grammars
SYNTAX-DIRECTED TRANSLATION
Translation of Assignment Statements
Generating 3-address code for Numerical Representation of Boolean expressions
Statements that Alter Flow of Control
Postfix Translations
Array references in arithmetic expressions
SYMBOL TABLES
Intermediate Code Generation
Directed Acyclic Graph
Flow of control statements with Jump method
Backpatching
RUN TIME ADMINISTRATION
Storage Organization
ERROR DETECTION AND RECOVERY
Error Recovery in Predictive Parsing
CODE OPTIMIZATION
Local Optimizations

Module-1
INTRODUCTION TO COMPILERS AND ITS PHASES
A compiler is a program takes a program written in a source language and translates it into an
equivalent program in a target language. The source language is a high level language and target
language is machine language.
Source program -> COMPILER -> Target program
Necessity of compiler
 Techniques used in a lexical analyzer can be used in text editors, information retrieval
system, and pattern recognition programs.
 Techniques used in a parser can be used in a query processing system such as SQL.
 Many software having a complex front-end may need techniques used in compilerdesign.
 A symbolic equation solver which takes an equation as input. That program should parse
the given input equation.
 Most of the techniques used in compiler design can be used in Natural Language
Processing (NLP) systems.
Properties of Compiler
a) Correctness
i) Correct output in execution.
ii) It should report errors
iii) Correctly report if the programmer is not following language syntax.
b) Efficiency
c) Compile time and execution.
d) Debugging / Usability.
Compiler Interpreter
1. It translates the whole program at a
time.
2. Compiler is faster.
3. Debugging is not easy.
4. Compilers are not portable.
1. It translate statement by statement.
2. Interpreter is slower.
3. Debugging is easy.
4. Interpreter are portable.
Types of compiler
1) Native code compiler
A compiler may produce binary output to run /execute on the same computer and operating
system. This type of compiler is called as native code compiler.
2) Cross Compiler
A cross compiler is a compiler that runs on one machine and produce object code for
another machine.
3) Bootstrap compiler
If a compiler has been implemented in its own language . self-hosting compiler.

4) One pass compiler
The compilation is done in one pass over the source program, hence the compilation is
completed very quickly. This is used for the programming language PASCAL, COBOL,
FORTAN.
5) Multi-pass compiler(2 or 3 pass compiler)
In this compiler , the compilation is done step by step . Each step uses the result of the
previous step and it creates another intermediate result.
Example:- gcc , Turboo C++
6) JIT Compiler
This compiler is used for JAVA programming language and Microsoft .NET
7) Source to source compiler
It is a type of compiler that takes a high level language as a input and its output as high
level language. Example Open MP
List of compiler
1. Ada compiler
2. ALGOL compiler
3. BASIC compiler
4. C# compiler
5. C compiler
6. C++ compiler
7. COBOL compiler
8. Smalltalk comiler
9. Java compiler

OVERVIEW OF LANGUAGE PROCESSING SYSTEM
A source program may be divided into modules stored in separate files.
Preprocessor –collects all the separate files to the source program.
A preprocessor produce input to compilers. They may perform the following functions.
1. Macro processing: A preprocessor may allow a user to define macros that are short
hands for longer constructs.
2. File inclusion: A preprocessor may include header files into the program text.
3. Rational preprocessor: these preprocessors augment older languages with more
modern flow-of-control and data structuring facilities.
3. Language Extensions: These preprocessor attempts to add capabilities to the language
by certain amounts to build-in macro
ASSEMBLER
Programmers found it difficult to write or read programs in machine language. They
begin to use a mnemonic (symbols) for each machine instruction, which they would
subsequently translate into machine language. Such a mnemonic machine language is
now called an assembly language. Programs known as assembler were written to
automate the translation of assembly language in to machine language. The input to an
assembler program is called source program, the output is a machine language translation
(object program).

INTERPRETER
An interpreter is a program that appears to execute a source program as if it were
machine language
Languages such as BASIC, SNOBOL, LISP can be translated using interpreters. JAVA
also uses interpreter. The process of interpretation can be carried out in following phases.
1. Lexical analysis
2. Synatx analysis
3. Semantic analysis
4. Direct Execution
Advantages
Modification of user program can be easily made and implemented as
execution proceeds.
Type of object that denotes a various may change dynamically.
Debugging a program and finding errors is simplified task for a program used
for interpretation.
The interpreter for the language makes it machine independent.
Disadvantages
The execution of the program is slower.
Memory consumption is more.
Loader and Linker
Once the assembler procedures an object program, that program must be placed into
memory and executed. The assembler could place the object program directly in memory
and transfer control to it, thereby causing the machine language program to be
execute. This would waste core by leaving the assembler in memory while the user’s
program was being executed. Also the programmer would have to retranslate his program
with each execution, thus wasting translation time. To over come this problems of wasted
translation time and memory. System programmers developed another component called
Loader
“A loader is a program that places programs into memory and prepares them for
execution.” It would be more efficient if subroutines could be translated into object form the
loader could” relocate” directly behind the user’s program. The task of adjusting programs o
they may be placed in arbitrary core locations is called relocation. Relocation loaders
perform four functions.

STRUCTURE OF THE COMPILER DESIGN
Major Parts of a Compiler
There are two major parts of a compiler: Analysis and Synthesis
 In analysis phase, an intermediate representation is created from the given source program.
Lexical Analyzer, Syntax Analyzer and Semantic Analyzer are the phases in this
part.
 In synthesis phase, the equivalent target program is created from this intermediate
representation.
Intermediate Code Generator, Code Generator, and Code Optimizer are the phases
in this part.
Source Lexical Syntax Semantic Intermediate Code Code Target
Program Analyzer Analyzer Analyzer Code Generator Optimizer Generator Program

Phases of a Compiler
Each phase transforms the source program from one representation into another representation.
They communicate with error handlers and the symbol table.
Lexical Analyzer
 Lexical Analyzer reads the source program character by character and returns the tokens
of the source program.
 A token describes a pattern of characters having same meaning in the source program.
(such as identifiers, operators, keywords, numbers, delimiters and so on)
Example:
In the line of code newval := oldval + 12, tokens are:
newval (identifier)
:= (assignment operator)
oldval (identifier)
+ (add operator)
12 (a number)
• Puts information about identifiers into the symbol table.
• Regular expressions are used to describe tokens (lexical constructs).
• A (Deterministic) Finite State Automaton can be used in the implementation of a lexical
analyzer.
Syntax Analyzer
• A Syntax Analyzer creates the syntactic structure (generally a parse tree) of the givenprogram.
• A syntax analyzer is also called a parser.
• A parse tree describes a syntactic structure.
Example:
For the line of code newval := oldval + 12, parse tree will be:
assignment
identifier := expression
newval expression + expression
identifier number
oldval 12
• The syntax of a language is specified by a context free grammar (CFG).
• The rules in a CFG are mostly recursive.
• A syntax analyzer checks whether a given program satisfies the rules implied by a CFG or not.

– If it satisfies, the syntax analyzer creates a parse tree for the given program.
Example:
CFG used for the above parse tree is:
assignment-> identifier := expression
expression -> identifier
expression -> number
expression -> expression + expression
• Depending on how the parse tree is created, there are different parsing techniques.
• These parsing techniques are categorized into two groups:
– Top-Down Parsing,
– Bottom-Up Parsing
• Top-Down Parsing:
– Construction of the parse tree starts at the root, and proceeds towards the leaves.
– Efficient top-down parsers can be easily constructed by hand.
– Recursive Predictive Parsing, Non-Recursive Predictive Parsing (LL Parsing).
• Bottom-Up Parsing:
– Construction of the parse tree starts at the leaves, and proceeds towards the root.
– Normally efficient bottom-up parsers are created with the help of some software tools.
– Bottom-up parsing is also known as shift-reduce parsing.
– Operator-Precedence Parsing – simple, restrictive, easy to implement
– LR Parsing – much general form of shift-reduce parsing, LR, SLR, LALR
Semantic Analyzer
 A semantic analyzer checks the source program for semantic errors and collects thetype
information for the code generation.
 Type-checking is an important part of semantic analyzer.
 Normally semantic information cannot be represented by a context-free language used in
syntax analyzers.
 Context-free grammars used in the syntax analysis are integrated with attributes(semantic
rules). The result is a syntax-directed translation and Attribute grammars
Example:
In the line of code newval := oldval + 12, the type of the identifier newval must match with type of
the expression (oldval+12).
 A compiler may produce an explicit intermediate codes representing the source program.
 These intermediate codes are generally machine architecture independent. But the level of
intermediate codes is close to the level of machine codes.
Example:

newval := oldval * fact + 1
id1 := id2 * id3 + 1
MULT id2, id3, temp1
ADDtemp1, #1, temp2
MOV temp2, id1
The last form is the Intermediates Code (Quadruples)
Code Optimizer
The code optimizer optimizes the code produced by the intermediate code generator in the termsof
time and space.
Example:
The above piece of intermediate code can be reduced as follows:
MULT id2, id3, temp1
ADD temp1, #1, id1
Code Generator
• Produces the target language in a specific architecture.
• The target program is normally is a relocatable object file containing the machine codes.
Example:
Assuming that we have architecture with instructions that have at least one operand as a machine
register, the Final Code our line of code will be:
MOVE id2, R1
MULT id3, R1
ADD #1, R1
MOVE R1, id1
Ex:-

Phases of a compiler are the sub-tasks that must be performed to complete the compilation
process. Passes refer to the number of times the compiler has to traverse through the entire
program.
Symbol Table Management:
A symbol table is a data structure that contains a record for each identifier with field for
attributes of the identifier.
The type information about the identifier is detected during the lexical analysis phases and
is entered into the symbol table.
Position= initial + rate*60;
Address Symbol Location attributes
1 Position 1000 id, float
2 Intial 2000 id, float
3 Rate 3000 id, float
4 60 4000 constant, int
Error Detection and Reporting:
Each phase detects/encounters errors after detecting errors.
This phase must deal with errors to continue with the process of compilation.
The following are some errors encountered in each phase:
i) Lexical Analyzer- Miss spell token.
ii) Semantic Analyzer- Type Mismatch.
iii) Syntax Analyzer-Missing parenthesis , less no. of operands.
iv) Intermediate code generation – In compatible operands for an operand.
v) Code optimization- Unreachable statement.
vi) Code Generation- Memory restriction to store a variable.

Languages
Terminology
• Alphabet : a finite set of symbols (ASCII characters)
• String : finite sequence of symbols on an alphabet
– Sentence and word are also used in terms of string
– ε is the emptystring
– |s| is the length of string s.
• Language: sets of strings over some fixed alphabet
– ∅ the empty set is a language.
– {ε} the set containing empty string is a language
– The set of all possible identifiers is a language.
• Operators on Strings:
– Concatenation: xy represents the concatenation of strings x and y. s ε = s ε s = s
– sn
= s s s .. s ( n times) s0
= ε
Operations on Languages
• Concatenation: L1L2 = { s1s2 | s1 ∈ L1 and s2 ∈ L2 }
• Union: L1 ∪ L2 = { s | s ∈ L1 or s ∈ L2 }
• Exponentiation: L0 = {ε} L1 = L L2 = LL
• Kleene Closure: L* =
• Positive Closure: L+ =
Examples:
• L1 = {a,b,c,d} L2 = {1,2}
• L1L2 ={a1,a2,b1,b2,c1,c2,d1,d2}
• L1 ∪ L2 = {a,b,c,d,1,2}
3
• L1
• L *
• L +
= all strings with length three (using a,b,c,d}
= all strings using letters a,b,c,d and empty string
= doesn’t include the empty string
1
1

Regular Expressions and Finite Automata
Regular Expressions
• We use regular expressions to describe tokens of a programming language.
• A regular expression is built up of simpler regular expressions (using defining rules)
• Each regular expression denotes a language.
• A language denoted by a regular expression is called as a regular set.
For Regular Expressions over alphabet Σ
Regular Expression Language it denotes
ε {ε}
a∈ Σ {a}
(r1) | (r2) L(r1) ∪ L(r2)
(r1) (r2) L(r1) L(r2) (r)* (L(r))*
(r) L(r)
• (r)+ = (r)(r)*
• (r)? = (r) | ε
• We may remove parentheses by using precedence rules.
– * highest
– concatenation next
– | lowest
• ab*|c means (a(b)*)|(c)
Examples:
– Σ = {0,1}
– 0|1 = {0,1}
– (0|1)(0|1) = {00,01,10,11}
– 0* = {ε ,0,00,000,0000,... }
– (0|1)* = All strings with 0 and 1, including the emptystring
Finite Automata
 A recognizer for a language is a program that takes a string x, and answers “yes” if x isa
sentence of that language, and “no” otherwise.
 We call the recognizer of the tokens as a finite automaton.
 A finite automaton can be: deterministic (DFA) or non-deterministic (NFA)
 This means that we may use a deterministic or non-deterministic automaton as alexical
analyzer.

 Both deterministic and non-deterministic finite automaton recognize regular sets.
 Which one?
– deterministic – faster recognizer, but it may take morespace
– non-deterministic – slower, but it may take less space
– Deterministic automatons are widely used lexical analyzers.
 First, we define regular expressions for tokens; Then we convert them into a DFA to get a
lexical analyzer for our tokens.
Non-Deterministic Finite Automaton (NFA)
 A non-deterministic finite automaton (NFA) is a mathematical model that consists of:
– S - a set of states
– Σ - a set of input symbols (alphabet)
– move - a transition function move to map state-symbol pairs to sets of states.
– s0 - a start (initial) state
– F- a set of accepting states (final states)
 ε- transitions are allowed in NFAs. In other words, we can move from one state to another
one
 without consuming any symbol.
 A NFA accepts a string x, if and only if there is a path from the starting state to one of
accepting states such that edge labels along this path spell out x.
Example:
Transition Graph
0 is the start state s0
{2} is the set of final states F
Σ = {a,b}
S = {0,1,2}
Transition Function:
a b
0 {0,1} {0}
1 {} {2}
2 {} {}
The language recognized by this NFA is (a|b)*ab

Deterministic Finite Automaton (DFA)
 A Deterministic Finite Automaton (DFA) is a special form of a NFA.
 No state has ε- transition
 For each symbol a and state s, there is at most one labeled edge a leaving s. i.e. transition
 function is from pair of state-symbol to state (not set ofstates)
Example:
The DFA to recognize the language (a|b)* ab is as follows.
0 is the start state s0
{2} is the set of final states F
Σ = {a,b}
S = {0,1,2}
Transition Function:
a B
0 1 0
1 1 2
2 1 0
Note that the entries in this function are single value and not set of values (unlike NFA).

Converting RE to NFA (Thomson Construction)
 This is one way to convert a regular expression into a NFA.
 There can be other ways (much efficient) for the conversion.
 Thomson’s Construction is simple and systematic method.
 It guarantees that the resulting NFA will have exactly one final state, and one start state.
 Construction starts from simplest parts (alphabet symbols).
 To create a NFA for a complex regular expression, NFAs of its sub-expressions are
combined to create its NFA.
To recognize an empty string ε:
To recognize a symbol a in the alphabet Σ:
For regular expression r1 | r2:
N(r1) and N(r2) are NFAs for regular expressions r1 and r2.
For regular expression r1. r2
Here, final state of N(r1) becomes the final state of N(r1r2)
For regular expression r*

Example:
For a RE (a|b) * a, the NFA construction is shown below.
Converting NFA to DFA (Subset Construction)
We merge together NFA states by looking at them from the point of view of the input characters:
From the point of view of the input, any two states that are connected by an -transition may as
well be the same, since we can move from one to the other without consuming any character.
Thus states which are connected by an -transition will be represented by the same states in the
DFA.
If it is possible to have multiple transitions based on the same symbol, then we can regard a
transition on a symbol as moving from a state to a set of states (ie. the union of all those states
reachable by a transition on the current symbol). Thus these states will be combined into a single
DFA state.
To perform this operation, let us define two functions:
• The -closure function takes a state and returns the set of states reachable from it based
on (one or more) -transitions. Note that this will always include the state tself.
We should be able to get from a state to any statein its -closure without consuming any input.
• The function move takes a state and a character, and returns the set of statesreachable
by one transition on this character.

We can generalize both these
application to individual states.
functions to apply to sets of states by taking the union of the
For Example, if A, B and C are states, move ({A,B,C},à') = move(A, à') U move(B, à') U move
(C,à').
The Subset Construction Algorithm is a follows:
put ε-closure({s0}) as an unmarked state into the set of DFA (DS)
while (there is one unmarked S1 in DS) do
begin
End
mark S1
for each input symbol a do begin
S2<-ε-closure(move(S1,a))
if (S2 is not in DS) then add S2 into DS as an unmarked state transfunc[S1,a]<-S2
end

ε-closure(move(S1,b)) = ε-closure({5}) = {1,2,4,5,6,7}
= S2 transfunc[S1,a]<-S1 transfunc[S1,b]<-S2
⇓mark S2
ε-closure(move(S2,a)) = ε-closure({3,8}) = {1,2,3,4,6,7,8} = S1
ε-closure(move(S2,b)) = ε-closure({5}) = {1,2,4,5,6,7}
= S2 transfunc[S2,a]<-S1 transfunc[S2,b]<-S2
S0 is the start state of DFA since 0 is a member of S0={0,1,2,4,7}
S1 is an accepting state of DFA since 8 is a member of S1 = {1,2,3,4,6,7,8}

LEXICAL ANALYSIS
 Lexical Analyzer reads the source program character by character to produce tokens.
 Normally a lexical analyzer does not return a list of tokens at one shot; it returns a token when the
parser asks a token from it.
Token, Pattern, Lexeme
 Token represents a set of strings described by a pattern. For example, an identifier represents a set
of strings which start with a letter continues with letters and digits. The actual string is called as
lexeme.
 Since a token can represent more than one lexeme, additional information should be held for that
specific lexeme. This additional information is called as the attribute of the token.
 For simplicity, a token may have a single attribute which holds the required information for that
token. For identifiers, this attribute is a pointer to the symbol table, and the symbol table holds the
actual attributes for that token.
• Examples:
– <identifier, attribute> where attribute is pointer to the symbol table
– <assignment operator> no attribute is needed
– <number, value> where value is the actual value of the number
• Token type and its attribute uniquely identify a lexeme.
• Regular expressions are widely used to specify patterns.
Pattern:
A pattern is a description of the form that the lexemes of a token may take. In the case of a keyword as a
token, the pattern is just the sequence of characters that form the keyword. For identifiers and some other
tokens, the pattern is a more complex structure that is matched by many strings.
Lexeme:
A lexeme is a sequence of characters in the source program that matches the pattern for a token and is
identified by the lexical analyzer as an instance of that token.

Lexical Analysis versus parsing
There are a number of reasons the analysis portion of a compiler is separated into lexical
analysis and parsing (syntax analysis) phases.
Simplicity of design. The separation of lexical and syntactic analysis often allows us to
simplify at least one of these tasks. For example, a parser that had to deal with
comments and whitespace as syntactic units would be considerably more complex than
one that can assume comments and whitespace have already been removed by the
lexical analyzer.
Compiler efficiency is improved. specialized buffering techniques for readinginput
characters can speed up the compiler significantly.
Compiler portability is enhanced. Input-device-specific peculiarities can be restricted to
the lexical analyzer.
Input Buffering(Lexical errors)
It is difficult to look one or more characters beyond the next lexeme before
c o n f o r m the right lexeme.
There are many situations where we need to look at least one additional character ahead.
For instance, we cannot be sure we've seen the end of an identifier until we see a character
that is not a letter or digit, and therefore is not part of the lexeme for id.
In C, single-character operators like -, =, or < could also be the beginning of a two-
character operator like ->, ==, or <=. Thus, we shall introduce a two-buffer scheme that handles
large look aheads safely.
Buffer Pairs
Because of the amount of time taken to process characters and the large number of characters
that must be processed during the compilation of a large source program, specialized buffering
techniques have been developed to reduce the amount of overhead required to process a single
input character. An important scheme involves two buffers that are alternately reloaded.

Fig: Using a Pair of Input Buffers
Two pointers to the input are maintained:
1. Pointer lexemeBegin, marks the beginning of the current lexeme
2. Pointer forward scans ahead until a pattern match is found.
Once the next lexeme is determined, forward is set to the character at its right end. Then,
after the lexeme is recorded as an attribute value of a token returned to the parser, 1exemeBegin
is set to the character immediately after the lexeme just found. In Fig, forward has passed the
end of the next lexeme, ** (the FORTRAN exponentiation operator), and must be retracted one
position to its left.
Advancing forward requires that first test whether reached the end of one of the
buffers, and if so, must reload the other buffer from the input, and move forward to the
beginning of the newly loaded buffer.
Sentinels
for each character read, we make two tests: one for the end of the buffer, and one to
determine what character is read . We can combine the buffer-end test with the test for the
current character if we extend each buffer to hold a sentinel character at the end. The sentinel is
a special character that cannot be part of the source program, and a natural choice is the character
eof. Note that eof retains its use as a marker for the end of the entire input. Any eof that appears
other than at the end of a buffer means that the input is at an end.
Panic Mode Error Recovery
Suppose a situation arises in which a lexical analyzer is unable to proceed because non of the
patterns for the token matches any prefix of the remaining in puts.
It detects successive characters from the remaining i/p until the lexical analyzer can find a well

defined token at the beginning of the i/p.
The other possible error recovery actions are:-
i) Delete 1 character from the remaining i/p.
ii) Insert a missing character to the remaining i/p.
iii) Replace a character by another character.
iv) Transpose two adjacent characters.

Lexical Analyzer Generator
Tokens
LEX is an example of Lexical Analyzer Generator.
Input to LEX
• The input to LEX consists primarily of Auxiliary Definitions and Translation Rules.
• To write regular expression for some languages can be difficult, because their regular
expressions can be quite complex. In those cases, we may use AuxiliaryDefinitions.
• We can give names to regular expressions, and we can use these names as symbols to define
other regular expressions.
• An Auxiliary Definition is a sequence of the definitions of the form:
d1 → r1
d2 → r2
.
.
dn → rn
where di is a distinct name and ri is a regular expression over symbols in
Σ ∪ {d1,d2,...,di-1}
basic symbols previously defined names
Example:
For Identifiers in Pascal
letter → A | B | ... | Z | a | b | ... | z digit → 0 | 1 | ... | 9
id → letter (letter | digit ) *
If we try to write the regular expression representing identifiers without using regular definitions, that
regular expression will be complex.

(A|...|Z|a|...|z) ( (A|...|Z|a|...|z) | (0|...|9) ) *
Example:
For Unsigned numbers in Pascal digit → 0 | 1 | ... | 9 digits → digit +
opt-fraction → ( . digits ) ?
opt-exponent → ( E (+|-)? digits ) ?
unsigned-num → digits opt-fraction opt-exponent
• Translation Rules comprise of a ordered list Regular Expressions and the Program Code to be
executed in case of that Regular Expression encountered.
R1 P1
R2 P2
.
.
Rn Pn
• The list is ordered i.e. the RE’s should be checked in order. If a string matches more than one
RE, the RE occurring higher in the list should be given preference and its Program Code is
executed.
Implementation of LEX
•The Regular Expressions are converted into NFA’s. The final states of each NFA correspond to
some RE and its Program Code.
•Different NFA’s are then converted to a single NFA with epsilon moves. Each final state of the NFA
corresponds one-to-one to some final state of individual NFA’s i.e. some RE and its Program Code.
The final states have an order according to the corresponding RE’s. If more than one final state is
entered for some string, then the one that is higher in order is selected.
•This NFA is then converted to DFA. Each final state of DFA corresponds to a set of states (having
at least one final state) of the NFA. The Program Code of each final state (of the DFA) is the
program code corresponding to the final state that is highest in order out of all the final states in the
set of states (of NFA) that make up this final state (of DFA).
Example:
AUXILIARY DEFINITIONS
(none)
TRANSLATION RULES
a {Action1}
abb{Action2}
a*b+{Action2}

First we construct an NFA for each RE and then convert this into a single NFA:
This NFA is now converted into a DFA. The transition table for the above DFA is as follows:
State A b Token found
0137 247 8 None
247 7 58 a
8 - 8 a*b+
7 7 8 None
58 - 68 a*b+
68 - 8 abb

BASICS OF SYNTAX ANALYSIS
• Syntax Analyzer creates the syntactic structure of the given source program.
• This syntactic structure is mostly a parse tree.
• Syntax Analyzer is also known as parser.
• The syntax of a programming is described by a context-free grammar (CFG). We will use BNF
(Backus-Naur Form) notation in the description of CFGs.
• The syntax analyzer (parser) checks whether a given source program satisfies the rules implied
by a context-free grammar or not.
– If it satisfies, the parser creates the parse tree of that program.
– Otherwise the parser gives the error messages.
• A context-free grammar
– gives a precise syntactic specification of a programming language.
– the design of the grammar is an initial phase of the design of a compiler.
– a grammar can be directly converted into a parser by some tools.
Parser
• Parser works on a stream of tokens.
• The smallest item is a token.
• We categorize the parsers into two groups:
• Top-Down Parser
– The parse tree is created top to bottom, starting from the root.
• Bottom-Up Parser
– The parse is created bottom to top; starting from the leaves
• Both top-down and bottom-up parsers scan the input from left to right (one symbol at a time).
• Efficient top-down and bottom-up parsers can be implemented only for sub-classes of context-
free grammars.
– LL for top-down parsing
– LR for bottom-up parsing

Context Free Grammars
Inherently recursive structures of a programming language are defined by a context-free grammar.
In a context-free grammar, we have:
– A finite set of terminals (in our case, this will be the set of tokens)
– A finite set of non-terminals (syntactic-variables)
– A finite set of productions rules in the following form
A → α where A is a non-terminal and
α is a string of terminals and non-terminals (including the empty string)
– A start symbol (one of the non-terminal symbol)
• L(G) is the language of G (the language generated by G) which is a set of sentences.
• A sentence of L(G) is a string of terminal symbols of G.
• If S is the start symbol of G then
(a) ω is a sentence of L(G) iff S ⇒ ω where ω is a string of terminals of G.
• If G is a context-free grammar, L(G) is a context-free language.
• Two grammars are equivalent if they produce the same language.
• S ⇒ α
- If α contains non-terminals, it is called as a sentential form of G.
- If α does not contain non-terminals, it is called as a sentence of G.
Derivations
Example:
(a) E → E + E | E – E | E * E | E / E | - E
(b) E → ( E)
(c) E → id
 E ⇒ E+E means that E+E derives from E
– we can replace E by E+E
– to able to do this, we have to have a production rule E→E+E in our grammar.
 E ⇒ E+E ⇒ id+E ⇒id+id means that a sequence of replacements of non-terminal symbols
 In general a derivation step is
αAβ ⇒ αγβ if there is a production rule A→γ in our grammar
Where α and β are arbitrary strings of terminal and non-terminal Symbol

α1 ⇒ α2 ⇒ ...⇒ αn (αn derives from α1 or α1 derives αn )
 At each derivation step, we can choose any of the non-terminal in the sentential form of G
for the replacement.
 If we always choose the left-most non-terminal in each derivation step, this derivationis
called as left-most derivation.
Example:
E ⇒ -E ⇒ -(E) ⇒ -(E+E) ⇒ -(id+E) ⇒ -(id+id)
 If we always choose the right-most non-terminal in each derivation step, this derivationis
called as right-most derivation.
Example:
E ⇒ -E ⇒ -(E) ⇒ -(E+E) ⇒ -(E+id) ⇒ -(id+id)
 We will see that the top-down parsers try to find the left-most derivation of the givensource
program.
 We will see that the bottom-up parsers try to find the right-most derivation of thegiven
source program in the reverse order.
Parse Tree
 Inner nodes of a parse tree are non-terminal symbols.
 The leaves of a parse tree are terminal symbols.
 A parse tree can be seen as a graphical representation of a derivation.
Example:

Ambiguity
 A grammar produces more than one parse tree for a sentence is called as anambiguous
 grammar.
 For the most parsers, the grammar must be unambiguous.
 Unambiguous grammar
 Unique selection of the parse tree for a sentence
 We should eliminate the ambiguity in the grammar during the design phase of thecompiler.
 An unambiguous grammar should be written to eliminate the ambiguity.
 We have to prefer one of the parse trees of a sentence (generated by an ambiguous
grammar) to disambiguate that grammar to restrict to this choice.
 Ambiguous grammars (because of ambiguous operators) can be disambiguatedaccording
to the precedence and associativity rules.
Example:
To disambiguate the grammar
E → E+E | E*E | E^E | id | (E),
we can use precedence of operators as follows:
^ (right to left)
* (left to right)
+ (left to right)
We get the following unambiguous grammar: E → E+T | T
T → T*F |F
F → G^F |G
G → id | (E)

Left Recursion
 A grammar is left recursive if it has a non-terminal A such that there is a derivation: A ⇒ Aα
for some string α
 Top-down parsing techniques cannot handle left-recursive grammars.
• So, we have to convert our left-recursive grammar into an equivalent grammar which is not left-
recursive.
• The left-recursion may appear in a single step of the derivation (immediate left-recursion), ormay
appear in more than one step of the derivation.
Immediate Left-Recursion
A → A α | β where β does not start with A
⇓ Eliminate immediate left recursion
A → βA’
A’ → α A’ | ε an equivalent grammar
In general,
A → A α1 | ... | A αm | β1 | ... | βn where β1 ... βn do not start with A
A → β1 A’ | ... | βn A’
A’ → α1 A’ | ... | αm A’| ε an equivalent grammar
Example:
E → E+T | T T → T*F | F F → id | (E)
E → T E’
E’ → +T E’ | ε
T → F T’
T’ → *F T’ | ε
F → id | (E)
•A grammar cannot be immediately left-recursive, but it still can be left-recursive.

•By just eliminating the immediate left-recursion, we may not get a grammar which is not left-
recursive.
Example:
S → Aa | b
A → Sc | d
This grammar is not immediately left-recursive, but it is still left-recursive.
S ⇒ Aa ⇒ Sca
Or
A ⇒ Sc ⇒ Aac
causes to a left-recursion
• So, we have to eliminate all left-recursions from our grammar.
Elimination
Arrange non-terminals in some order: A1 ... An
for i from 1 to n do {
for j from 1 to i-1 do {
replace each production
Ai → Aj γ
by
Ai → α1 γ | ... | αk γ
where Aj → α1 | ... | αk
}
eliminate immediate left-recursions among Ai productions
}
Example:
S → Aa | b
A → Ac | Sd | f
Case 1: Order of non-terminals: S, A

S’ → dA’aS’ | ε
So, the resulting equivalent grammar which is not left-recursive is: S → fA’aS’ | bSS’ → dA’aS’ | ε
A → SdA’ | fA’
A’ → cA’ | ε
Left Factoring
• A predictive parser (a top-down parser without backtracking) insists that the grammar must
be left-factored.
Grammar->a new equivalent grammar suitable for predictiveparsing
stmt → if expr then stmt else stmt | if expr then stmt
• when we see if, we cannot now which production rule to choose to re-write stmt inthe
derivation
• In general,
A → βα1 | βα2
where α is non-empty and the first symbols of β1 and β2 (if they have one)are different.
• when processing α we cannot know whetherexpand
A to βα1 or
A to βα2
• But, if we re-write the grammar as follows
A → αA’
A’ → β1 | β2 so, we can immediately expand A to αA’
10.1 Algorithm
• For each non-terminal A with two or more alternatives (production rules) with a common
non-empty prefix, let say
A → βα1 | ... | βαn | γ1 | ... | γm convert it into
A → αA’ | γ1 | ... | γm
A’ → β1 | ... | βn
Example:

A → abB | aB | cdg | cdeB | cdfB
⇓
A → aA’ | cdg | cdeB |cdfB
A’ → bB | B
⇓
A → aA’ | cdA’’
A’ → bB | B
A’’ → g | eB | fB
Example:
A → ad | a | ab | abc | b
⇓
A → aA’ | b
A’ → d | ε | b | bc
⇓
A → aA’ | b
A’ → d | ε | bA’’
A’’ → ε | c

YACC
YACC generates C code for a syntax analyzer, or parser. YACC uses grammar rules that allow it to
analyze tokens from LEX and create a syntax tree. A syntax tree imposes a hierarchical structure on
tokens. For example, operator precedence and associativity are apparent in the syntax tree. The
next step, code generation, does a depth-first walk of the syntax tree to generate code. Some
compilers produce machine code, while others output assembly.
YACC takes a default action when there is a conflict. For shift-reduce conflicts, YACC will shift.
For reduce-reduce conflicts, it will use the first rule in the listing. It also issues a warning message
whenever a conflict exists. The warnings may be suppressed by making the grammarunambiguous.
... definitions ...
%%
... rules ...
%%
... subroutines ...
Input to YACC is divided into three sections. The definitions section consists of token declarations,
and C code bracketed by “%{“ and “%}”. The BNF grammar is placed in the rules section, and user
subroutines are added in the subroutines section.

TOP-DOWN PARSING
• The parse tree is created top to bottom.
• Top-down parser
– Recursive-Descent Parsing
• Backtracking is needed (If a choice of a production rule does not work, we backtrack to try other
alternatives.)
• It is a general parsing technique, but not widely used.
• Not efficient
– Predictive Parsing
• No backtracking
• Efficient
• Needs a special form of grammars i.e. LL (1) grammars.
• Recursive Predictive Parsing is a special form of Recursive Descent parsing without backtracking.
• Non-Recursive (Table Driven) Predictive Parser is also known as LL (1) parser.
Recursive-Descent Parsing (uses Backtracking)
• Backtracking is needed.
• It tries to find the left-most derivation.
Example:
If the grammar is S → aBc; B → bc | b and the input is abc:
Predictive Parser
Grammar ---------------> -------------> a grammar suitable for predictive
Eliminate
left recursion
Left
Factor
parsing (a LL(1) grammar)
no %100 guarantee.
• When re-writing a non-terminal in a derivation step, a predictive parser can uniquely choose a
production rule by just looking the current symbol in the input string.
Example:
stmt → if...........|
while ...... |
begin ...... |
for .....

When we are trying to write the non-terminal stmt, we have to choose first production rule.
When we are trying to write the non-terminal stmt, we can uniquely choose the production rule by
just looking the current token.
We eliminate the left recursion in the grammar, and left factor it. But it may not be
suitable for predictive parsing (not LL (1) grammar).

Recursive Predictive Parsing
Each non-terminal corresponds to a procedure.
Example:
A → aBb | bAB
proc A {
}
}
case of the current token {
‘a’: - match the current token with a, and move to the next token;
- call ‘B’;
- match the current token with b, and move to the next token;
‘b’: - match the current token with b, and move to the next token;
- call ‘A’;
- call ‘B’;
Applying ε-productions
A → aA | bB | ε
If all other productions fail, we should apply an ε-production. For example, if the current token is not
a or b, we may apply the ε-production.
Most correct choice: We should apply an ε-production for a non-terminal A when the current token is
in the follow set of A (which terminals can follow A in the sentential forms).
Example:
A → aBe | cBd | C
B → bB | ε
C → f
proc A {
a: - match the current token with a and move to the next token;
- call B;
- match the current token with e and move to the next token;
c: - match the current token with c and move to the nexttoken;
- call B;
- match the current token with d and move to the next token;
f: - call C //First Set of C
}

proc C {
}
proc B {
}
match the current token with f and move to the next token;
b: - match the current token with b and move to the next token;
- call B
e,d: - do nothing //Follow Set of B
}
}

Non-Recursive Predictive Parsing – LL (1) Parser
• Non-Recursive predictive parsing is a table-driven parser.
• It is a top-down parser.
• It is also known as LL(1) Parser.
input buffer
stack Non-recursive output
Predictive Parser
Parsing Table input buffer
– our string to be parsed. We will assume that its end is marked with a special symbol $.
output
– a production rule representing a step of the derivation sequence (left-most derivation) of
the string in the input buffer.
stack
– contains the grammar symbols
– at the bottom of the stack, there is a special end marker symbol $.
– initially the stack contains only the symbol $ and the starting symbol S. ($S<-initialstack)
– when the stack is emptied (i.e. only $ left in the stack), the parsing is completed.
parsing table
– a two-dimensional array M[A,a]
– each row is a non-terminal symbol
– each column is a terminal symbol or the special symbol $
– each entry holds a production rule.
Parser Actions
The symbol at the top of the stack (say X) and the current symbol in the input string (say a)
determine the parser action. There are four possible parser actions.
• If X and a are $- > parser halts (successful completion)
• If X and a are the same terminal symbol (different from $)
->parser pops X from the stack, and moves the next symbol in the input buffer.
• If X is a non-terminal

• parser looks at the parsing table entry M[X,a]. If M[X,a] holds a production rule
X→Y1Y2...Yk, it pops X from the stack and pushes Yk,Yk-1,...,Y1 into the stack. The parser
also outputs the production rule X→Y1Y2...Yk to represent a step of the derivation.
• None of the above- > error
– All empty entries in the parsing table are errors.
– If X is a terminal symbol different from a, this is also an error case.
Example:
For the Grammar is S → aBa; B → bB | ε and the following LL(1) parsing table:
A B $
S S → aBa
B B → ε B → bB
stack input output
$S
$aBa
abba$
abba$
S → aBa
$aB bba$ B → bB
$aBb
$aB
bba$
ba$ B → bB
$aBb
$aB
ba$
a$ B → ε
$a
$
a$
$ accept, successful completion
Outputs: S → aBa B → bB B → bB B → ε
Derivation (left-most): S⇒aBa⇒abBa⇒abbBa⇒abba

Constructing LL(1) parsing tables
• Two functions are used in the construction of LL(1) parsing tables -FIRST & FOLLOW
• FIRST(α) is a set of the terminal symbols which occur as first symbols in strings derivedfrom
α where α is any string of grammar symbols.
• if α derives to ε, then ε is also in FIRST(α) .
• FOLLOW(A) is the set of the terminals which occur immediately after (follow) the non-terminal
A in the strings derived from the starting symbol.
– A terminal a is in FOLLOW(A) if S ⇒ αAaβ
– $ is in FOLLOW(A) if S ⇒ αA
To Compute FIRST for Any String X:
• If X is a terminal symbol->FIRST(X)={X}
• If X is a non-terminal symbol and X → ε is a production rule->ε is in FIRST(X).
• If X is a non-terminal symbol and X → Y1Y2..Yn is a production rule
->if a terminal a in FIRST(Yi) and ε is in all FIRST(Yj) for j=1,...,i-1 then a is in FIRST(X).
->if ε is in all FIRST(Yj) for j=1,...,n then ε is in FIRST(X).
• If X is ε->FIRST(X)={ε}
• If X is Y1Y2..Yn
-> if a terminal a in FIRST(Yi) and ε is in all FIRST(Yj) for j=1,...,i-1 then a is in FIRST(X).
->if ε is in all FIRST(Yj) for j=1,...,n then ε is in FIRST(X).
To Compute FOLLOW (for non-terminals):
• If S is the start symbol - > $ is in FOLLOW(S)
• If A → αBβ is a production rule->everything in FIRST(β) is FOLLOW(B) except ε
• If ( A → αB is a production rule ) or ( A → αBβ is a production rule and ε is in FIRST(β) )
->everything in FOLLOW(A) is in FOLLOW(B).
• Apply these rules until nothing more can be added to any followset.
Algorithm for Constructing LL(1) Parsing Table:
• for each production rule A → α of a grammar G
– for each terminal a in FIRST(α)->add A → α to M[A,a]
– If ε in FIRST(α)->for each terminal a in FOLLOW(A) add A → α to M[A,a]
– If ε in FIRST(α) and $ in FOLLOW(A)->add A → α toM[A,$]
• All other undefined entries of the parsing table are error entries.
Example:
E → TE’
E’ → +TE’ | ε
T → FT’
T’ → *FT’ | ε
F → (E) | id

FIRST(F) = {(,id}
FIRST(T’) = {*, ε}
FIRST(T) = {(,id}
FIRST(E’) = {+, ε}
FIRST(E) = {(,id}
FIRST(TE’) = {(,id}
FIRST(+TE’ ) = {+}
FIRST(ε) = {ε}
FIRST(FT’) = {(,id}
FIRST(*FT’) = {*}
FIRST((E)) = {(}
FIRST(id) = {id}
FOLLOW(E) = { $, ) }
FOLLOW(E’) = { $, ) }
FOLLOW(T) = { +, ), $ }
FOLLOW(T’) = { +, ), $}
FOLLOW(F) = {+, *, ), $ }
LL(1) Parsing Table
E → TE’ FIRST(TE’)={(,id} - > E → TE’ into M[E,(] and M[E,id]
E’ → +TE’ FIRST(+TE’ )={+} - > E’ → +TE’ into M[E’,+]
E’ → ε FIRST(ε)={ε} ->none
but since ε in FIRST(ε)
and FOLLOW(E’)={$,)} - > E’ → ε into M[E’,$] and M[E’,)]
T → FT’ FIRST(FT’)={(,id} - > T → FT’ into M[T,(] and M[T,id]
T’ → *FT’ FIRST(*FT’ )={*} ->T’ → *FT’ into M[T’,*]
T’ → ε FIRST(ε)={ε} ->none
but since ε in FIRST(ε)
and FOLLOW(T’)={$,),+} ->T’ → ε into M[T’,$], M[T’,)] and M[T’,+]
F → (E) FIRST((E) )={(} - > F → (E) into M[F,(]
F → id FIRST(id)={id} ->F → id into M[F,id]
id + * ( ) $
E E → TE’ E → TE’
E’ E’ → +TE’ E’ → ε E’ → ε
T T → FT’ T → FT’
T’ T’ → ε T’ → *FT’ T’ → ε T’ → ε
F F → id F → (E)

LL(1)Grammars
• A grammar whose parsing table has no multiply-defined entries is said to be LL(1) grammar.
• The parsing table of a grammar may contain more than one production rule. In this case, we say
that it is not a LL(1) grammar.
• A grammar G is LL(1) if and only if the following conditions hold for two distinctiveproduction
rules A → α and A → β:
1. Both α and β cannot derive strings starting with same terminals.
2. At most one of α and β can derive to ε.
3. If β can derive to ε, then α cannot derive to any string starting with a terminal in
FOLLOW(A).
Non- LL(1) Grammars
Example:
S → i C t S E | a
E → e S | ε
C → b
FOLLOW(S) = { $,e }
FOLLOW(E) = { $,e }
FOLLOW(C) = { t }
FIRST(iCtSE) = {i}
FIRST(a) = {a}
FIRST(eS) = {e}
FIRST(ε) = {ε}
FIRST(b) = {b}
two production rules for M[E,e]
The Problem with multiple entries here is that of Ambiguity.
• What do we have to do it if the resulting parsing table contains multiply defined entries?
– If we didn’t eliminate left recursion, eliminate the left recursion in the grammar.
– If the grammar is not left factored, we have to left factor the grammar.
– If its (new grammar’s) parsing table still contains multiply defined entries, that grammar is
ambiguous or it is inherently not a LL(1) grammar.
• A left recursive grammar cannot be a LL(1) grammar.
– A → Aα | β
->any terminal that appears in FIRST(β) also appears FIRST(Aα) because Aα ⇒ βα.
->If β is ε, any terminal that appears in FIRST(α) also appears in FIRST(Aα) and
a b e i t $
S S → a S → iCtSE
E
E → e S
E → ε E → ε
C C → b

FOLLOW(A).
• A grammar is not left factored, it cannot be a LL(1) grammar
– A → αβ1 | αβ2
->any terminal that appears in FIRST(αβ1) also appears in FIRST(αβ2).
• An ambiguous grammar cannot be a LL(1) grammar.

BASIC BOTTOM-UP PARSING TECHNIQUES
• A bottom-up parser creates the parse tree of the given input starting from leaves towards the
root.
• A bottom-up parser tries to find the right-most derivation of the given input in the reverseorder.
(a) S ⇒ ... ⇒ ω (the right-most derivation of ω)
(b) ← (the bottom-up parser finds the right-most derivation in thereverse
order)
• Bottom-up parsing is also known as shift-reduce parsing because its two main actions areshift
and reduce.
– At each shift action, the current symbol in the input string is pushed to a stack.
– At each reduction step, the symbols at the top of the stack (this symbol sequence is the
right side of a production) will replaced by the non-terminal at the left side of thatproduction.
– There are also two more actions: accept and error.
Shift-Reduce Parsing
• A shift-reduce parser tries to reduce the given input string into the starting symbol.
• At each reduction step, a substring of the input matching to the right side of a production ruleis
replaced by the non-terminal at the left side of that production rule.
• If the substring is chosen correctly, the right most derivation of that string is created in the reverse
order.
Example:
For Grammar S → aABb; A → aA | a; B → bB | b and Input string aaabb,
aaabb
⇒ aaAbb
⇒ aAbb
⇒ aABb
⇒ S
The above reduction corresponds to the following rightmost derivation: S ⇒ aABb ⇒ aAbb ⇒ aaAbb
⇒ aaabb
Handle
• Informally, a handle of a string is a substring that matches the right side of a production rule.
- But not every substring that matches the right side of a production rule is handle.
• A handle of a right sentential form γ (≡αβω) is a production rule A → β and a position of γwhere
the string β may be found and replaced by A to produce the previous right-sentential form in a

rightmost derivation of γ.
S ⇒ αAω ⇒ αβω
• If the grammar is unambiguous, then every right-sentential form of the grammar has exactly one
handle.
• We will see that ω is a string of terminals.
• A right-most derivation in reverse can be obtained by handle-pruning.
S=γ0 ⇒ γ1 ⇒ γ2 ⇒ ... ⇒ γn-1 ⇒ γn= ω
input string
• Start from γn, find a handle An→βn in γn, and replace βn in by An to get γn-1.
• Then find a handle An-1→βn-1 in γn-1, and replace βn-1 in by An-1 to get γn-2.
• Repeat this, until we reach S.
Example:
E → E+T | T
T → T*F | F
F → (E) | id
Right-Most Derivation of id+id*id is
E ⇒ E+T ⇒ E+T*F ⇒ E+T*id ⇒ E+F*id⇒ E+id*id ⇒ T+id*id ⇒ F+id*id ⇒ id+id*id
Right-Most Sentential Form Reducing Production id+id*id
F → id
F+id*id T → F T+id*id
E → T E+id*id F → id E+F*id
T → F E+T*id F → id E+T*F
T → T*F E+T E → E+T E
Handles are underlined in the right-sentential forms.
Stack Implementation
• There are four possible actions of a shift-parser action:
• Shift : The next input symbol is shifted onto the top of the stack.
• Reduce: Replace the handle on the top of the stack by the non-terminal.
• Accept: Successful completion of parsing.
• Error: Parser discovers a syntax error, and calls an error recovery routine.
• Initial stack just contains only the end-marker $.

• The end of the input string is marked by the end-marker $.
Example:
Stack Input Action
$
$id +id*id$
id+id*id$ shift
reduce by F → id
$F +id*id$ reduce by T → F
$T +id*id$ reduce by E → T
$E +id*id$ shift shift
$E+ id*id$
$E+id *id$ reduce by F → id
$E+F
$E+T
$E+T*
*id$
*id$
id$
reduce by T → F
shift shift
$E+T*id $ reduce by F → id
$E+T*F $ reduce by T → T*F
$E+T $ reduce by E → E+T
$E $ accept

k input symbols used as a look- head
symbol do determine parser action
Conflicts during Shift Reduce Parsing
• There are context-free grammars for which shift-reduce parsers cannot be used.
• Stack contents and the next input symbol may not decide action:
– shift/reduce conflict: Whether make a shift operation or a reduction.
– reduce/reduce conflict: The parser cannot decide which of several reductions to make.
• If a shift-reduce parser cannot be used for a grammar, that grammar is called asnon-LR(k)
grammar.
LR (k)
input scanned from
left to right Right most derivation
• An ambiguous grammar can never be a LR grammar.
Types of Shift Reduce Parsing
There are two main categories of shift-reduce parsers
1. Operator-Precedence Parser
– simple, but only a small class of grammars.
2. LR-Parsers
– Covers wide range of grammars.
• SLR – Simple LR parser
• CLR – most general LR parser (Canonical LR)
• LALR – intermediate LR parser (Look Ahead LR)
– SLR, CLR and LALR work same, only their parsing tables are different.

Operator Precedence Parsing
• Operator grammar
– small, but an important class of grammars
– we may have an efficient operator precedence parser (a shift-reduce parser) for anoperator
grammar.
• In an operator grammar, no production rule can have:
– ε at the right side
– two adjacent non-terminals at the right side.
Examples:
E→AB E→EOE E→E+E |
A→a E→id E*E |
B→b
not operator grammar
O→+|*|/
not operator grammar
E/E | id
operator grammar
Precedence Relations
• In operator-precedence parsing, we define three disjoint precedence relations between certain
pairs of terminals.
a <. b b has higher precedence than a a =· b b has same precedence as a
a .> b b has lower precedence than a
• The determination of correct precedence relations between terminals are based on the traditional
notions of associativity and precedence of operators. (Unary minus causes a problem).
• The intention of the precedence relations is to find the handle of a right-sentential form,
<. with marking the left end,
=· appearing in the interior of the handle, and
.
> marking the right hand.
• In our input string $a1a2...an$, we insert the precedence relation between the pairs of terminals
(the precedence relation holds between the terminals in that pair).
Example:
E → E+E | E-E | E*E | E/E | E^E | (E) | -E | id
The partial operator-precedence table for this grammar is as shown.
Then the input string id+id*id with the precedence relations inserted will be:
$ <. id .> + <. id .> * <. id .> $
id + * $
id .> .> .>
+ <. .> <. .>
* <. .> .> .>
$ <. <. <.

Using Precedence relations to find Handles
• Scan the string from left end until the first .> is encountered.
• Then scan backwards (to the left) over any =· until a <. isencountered.
• The handle contains everything to left of the first .> and to the right of the <. isencountered.
The handles thus obtained can be used to shift reduce a given string.
Operator-Precedence Parsing Algorithm
• The input string is w$, the initial stack is $ and a table holds precedence relationsbetween
certain terminals
Parsing Algorithm
The input string is w$, the initial stack is $ and a table holds precedence relations between certain
terminals.
set p to point to the first symbol of w$ ;
repeat forever
if ( $ is on top of the stack and p points to $ ) then return else {
let a be the topmost terminal symbol on the stack and let b be the symbol pointed to by p;
if ( a <. b or a =· b )then { /* SHIFT */
push b onto the stack;
advance p to the next input symbol;
}
else if ( a .> b) then /* REDUCE */
repeat pop stack
until ( the top of stack terminal is related by <. to the terminal most recently popped);
else error();
}
Example:
stack input action
$ id+id*id$ $ <. id shift
$id +id*id$ id .> + reduce E → id
$
$+
+id*id$
id*id$
shift
shift
$+id *id$ id .> * reduce E → id
$+
$+*
*id$
id$
shift
shift
$+*id $ id .> $ reduce E → id
$+* $ * .> $ reduce E → E*E

$+ $ + .> $ reduce E → E+E
$ $ accept
Creating Operator-Precedence Relations from Associativity and Precedence
1. If operator O1 has higher precedence than operator O2,
->O1 .> O2 and O2 <. O1
2. If operator O1 and operator O2 have equal precedence, they are left-associative ->O1 .> O2
and O2 .> O1 they are right-associative- > O1 <. O2 and O2 <. O1
3. For all operators O,
O <. id, id .> O, O <. (, (<. O, O .> ), ) .> O, O .> $, and $ <. O
4. Also,let
(=·) $ <. ( id .> ) ) .> $
( <. (
( <. id
$ <. id id .> $ ) .> )
Example:
The complete table for the Grammar E → E+E | E-E | E*E | E/E | E^E | (E) | -E | id is:
Operator-Precedence Grammars
There is another more general way to compute precedence relations among terminals:
1. a = b if there is a right side of a production of the form αaβbγ, where β is either a single non-
terminal or ε.
2. a < b if for some non-terminal A there is a right side of the form αaAβ and A derives to γbδ
+ - * / ^ id ( ) $
+ .> .> <. <. <. <. <. .> .>
- .> .> <. <. <. <. <. .> .>
* .> .> .> .> <. <. <. .> .>
/ .> .> .> .> <. <. <. .> .>
^ .> .> .> .> <. <. <. .> .>
id .> .> .> .> .> .> .>
( <. <. <. <. <. <. <. =·
) .> .> .> .> .> .> .>
$ <. <. <. <. <. <. <.

where γ is a single non-terminal or ε.
3. a > b if for some non-terminal A there is a right side of the form αAbβ and A derives to γaδ
where δ is a single non-terminal or ε.
Note that the grammar must be unambiguous for this method. Unlike the previous method, it does
not take into account any other property and is based purely on grammar productions. An
ambiguous grammar will result in multiple entries in the table and thus cannot be used.
Handling Unary Minus
• Operator-Precedence parsing cannot handle the unary minus when we also use the binaryminus
in our grammar.
• The best approach to solve this problem is to let the lexical analyzer handle this problem.
–The lexical analyzer will return two different operators for the unary minus and the binary
minus.
–The lexical analyzer will need a look ahead to distinguish the binary minus from the unary
minus.
• Then, we make
O <. unary-minus for any operator
unary-minus .> O if unary-minus has higher precedence thanO
unary-minus <. O if unary-minus has lower (or equal)
precedence than O
Precedence Functions
• Compilers using operator precedence parsers do not need to store the table of precedence
relations.
• The table can be encoded by two precedence functions f and g that map terminal symbolsto
integers.
• For symbols a and b.
f(a) < g(b) whenever a <. b
f(a) = g(b) whenever a =· b
f(a) > g(b) whenever a .> b
Advantages and Disadvantages
• Advantages:
– simple
– powerful enough for expressions in programming languages
• Disadvantages:
– It cannot handle the unary minus (the lexical analyzer should handle the unaryminus).
– Small class of grammars.
– Difficult to decide which language is recognized by the grammar.

LR PARSING
LR parsing is attractive because:
– LR parsing is most general non-backtracking shift-reduce parsing, yet it is still efficient.
– The class of grammars that can be parsed using LR methods is a proper superset of the
class of grammars that can be parsed with predictive parsers.
LL(1)-Grammars ⊂ LR(1)-Grammars
– An LR-parser can detect a syntactic error as soon as it is possible to do so a left-to-right
scan of the input.
Parser Configuration
• A configuration of a LR parsing is:
• Sm and ai decides the parser action by consulting the parsing action table. (Initial Stack
contains just So )
• A configuration of a LR parsing represents the right sentential form:
X1 ... Xm ai ai+1 ... an $

Parser Actions
1. shift s -- shifts the next input symbol and the state s onto the stack
( So X1 S1 ... Xm Sm, ai ai+1 ... an $ ) ->( So X1 S1 ... Xm Sm ai s, ai+1 ... an $ )
2. reduce A→β (or rn where n is a productionnumber)
– pop 2|β| (=r) items from the stack; let us assume that β = Y1Y2...Yr
– then push A and s where s=goto[sm-r,A]
( So X1 S1 ... Xm Sm, ai ai+1 ... an $ )->(So X1 S1 ... Xm-r Sm-r A s, ai ... an $ )
– Output is the reducing production reduce A→β
– In fact, Y1Y2...Yr is a handle.
X1 ... Xm-r A ai ... an $ ⇒ X1 ... Xm Y1...Yr ai ai+1 ... an $
3. Accept – Parsing successfully completed.
4. Error -- Parser detected an error (an empty entry in the action table)Example:
Let following be the grammar and its LR parsing table.
1) E → E+T
2) E → T
3) T → T*F
4) T → F
5) F → (E)
6) F → id
Action Goto
state id + * ( ) $ E T F
0 s5 s4 1 2 3
1 s6 acc
2 r2 s7 r2 r2
3 r4 r4 r4 r4
4 s5 s4 8 2 3
5 r6 r6 r6 r6
6 s5 s4 9 3
7 s5 s4 10
8 s6 s11
9 r1 s7 r1 r1
10 r3 r3 r3 r3
11 r5 r5 r5 r5

The action of the parser would be as follows:
stack
0
input
id*id+id$
action
shift 5
output
0id5 *id+id$ reduce by F→id F→id
0F3
0T2
0T2*7
*id+id$
*id+id$
id+id$
reduce by T→F
shift 7
T→F
0T2*7id5 +id$ reduce by F→id F→id
0T2*7F10 +id$ reduce by T→T*F T→T*F
0T2
0E1
0E1+6
+id$
+id$
id$
reduce by E→T
shift 6
E→T
0E1+6id5 $ reduce by F→id F→id
0E1+6F3 $ reduce by T→F T→F
0E1+6T9 $
0E1 $
reduce by E→E+T E→E+T

Constructing SLR Parsing tables
• An LR parser using SLR parsing tables for a grammar G is called as the SLR parser for G.
• If a grammar G has an SLR parsing table, it is called SLR grammar.
• Every SLR grammar is unambiguous, but every unambiguous grammar is not aSLR
grammar.
• Augmented Grammar: G’ is G with a new production rule S’→S where S’ is the new starting
symbol.
LR(0) Items
• An LR(0) item of a grammar G is a production of G a dot at the some position of the right
side.
Example:
A → aBb
Possible LR(0) Items (four different possibility):
A → .aBb A → a.Bb A → aB.b A → aBb.
• Sets of LR(0) items will be the states of action and goto table of the SLR parser.
• A collection of sets of LR(0) items (the canonical LR(0) collection) is the basis for
constructing SLR parsers.
Closure Operation
If I is a set of LR(0) items for a grammar G, then closure(I) is the set of LR(0) items constructed
from I by the two rules:
1. Initially, every LR(0) item in I is added to closure(I).
2. If A → α.Bβ is in closure(I) and Bγ→ is a production rule of G; then B→.γ
will be in the closure(I). We will apply this rule
until no more new LR(0) items can be added to closure(I).
Example:
E’ → E ; E → E+T;
E → T;
T → T*F; T → F;
F → (E);
F → id
closure({E’ → .E}) = { E’ → .E, E → .E+T, E → .T, T → .T*F, T → .F, F → .(E), F → .id }

GOTO Operation
If I is a set of LR(0) items and X is a grammar symbol (terminal or non-terminal), then goto(I,X) is
defined as follows:
If A → α.Xβ in I then every item in closure({A → αX.β}) will be in goto(I,X).
Example: I = { E’ → .E, E → .E+T, E → .T, T → .T*F, T → .F, F → .(E), F →.id }
goto(I,E) = { E’ → E., E → E.+T }
goto(I,T) = { E → T., T → T.*F }
goto(I,F) = {T → F. }
goto(I,() = {F→ (.E), E→ .E+T, E→ .T, T→ .T*F, T→ .F, F→ .(E), F→ .id }
goto(I,id) = { F → id. }

Construction of The Canonical LR(0) Collection
To create the SLR parsing tables for a grammar G, we will create the canonical LR(0)
collection of the grammar G’.
Algorithm:
C is { closure({S’→.S}) }
repeat the followings until no more set of LR(0) items can be added to C.
for each I in C and each grammar symbol X
if goto(I,X) is not empty and not in C
add goto(I,X) to C
GOTO function is a DFA on the sets in C. Example:
For grammar used above, Canonical LR(0) items are as follows-
I0: E’ → .E
E → .E+T
E → .T
I1: E’ → E.
E → E.+T
I6: E → E+.T
T → .T*F
T → .F
I9: E → E+T.
T → T.*F
T → .T*F I2: E → T. F → .(E) I10: T → T*F.
T → .F
F → .(E)
F → .id
T → T.*F
I3: T → F.
F → .id
I7: T → T*.F I11: F → (E).
I4: F → (.E)
F → .(E)
F → .id
E → .E+T
E → .T
T → .T*F
T → .F
I8: F → (E.)
E → E.+T
F → .(E)
F → .id
I5: F → id.
Transition Diagram (DFA) of GOTO Function is as follows-

Parsing Table
1. Construct the canonical collection of sets of LR(0) items forG’.
C←{I0,...,In}
2. Create the parsing action table as follows
a. If a is a terminal, Aα→.aβ in Ii and goto(Ii,a)=Ij then action[i,a] is shift j.
b. If Aα→. is in Ii , then action[i,a] is reduce Aα→ for all a in FOLLOW(A) where
A≠S’.
c. If S’→S. is in Ii , then action[i,$] is accept.
d. If any conflicting actions generated by these rules, the grammar is not SLR(1).
3. Create the parsing goto table
a. for all non-terminals A, if goto(Ii,A)=Ij then goto[i,A]=j
4. All entries not defined by (2) and (3) are errors.
5. Initial state of the parser containsS’→.S
Example:
For the Grammar used above, SLR Parsing table is as follows:
Action Goto
state id + * ( ) $ E T F
0 s5 s4 1 2 3
1 s6 acc
2 r2 s7 r2 r2
3 r4 r4 r4 r4
4 s5 s4 8 2 3
5 r6 r6 r6 r6
6 s5 s4 9 3
7 s5 s4 10
8 s6 s11
9 r1 s7 r1 r1
10 r3 r3 r3 r3
11 r5 r5 r5 r5

Shift/reduce and reduce/reduce conflicts
• If a state does not know whether it will make a shift operation or reduction for aterminal,
we say that there is a shift/reduce conflict.
Example:
S → L=R
S → R
I0: S’ → .S
S → .L=R
I1: S’ → S. I6: S → L=.R
R → .L
I9: S → L=R.
L→ *R
L → id
S → .R
L → .*R
I2: S → L.=R
R → L.
L→ .*R
L → .id
R → L L → .id
R → .L I3: S → R.
Problem in I2
I4: L → *.R
R → .L
I7: L → *R.
FOLLOW(R)={=,$}
= shift 6
L→.*R
L → .id
I8: R → L.
& reduce by R → L
shift/reduce conflict
I5: L → id.
• If a state does not know whether it will make a reduction operation using the production
rule i or j for a terminal, we say that there is a reduce/reduce conflict.
Example:
S → AaAb I0: S’ → .S
S → BbBa S → .AaAb
A → ε S → .BbBa
B → ε A → .
B → .
Problem FOLLOW(A)={a,b} FOLLOW(B)={a,b}

a reduce by A → ε b reduce by A → ε
reduce by B → ε
reduce/reduce conflict
reduce by B → ε
reduce/reduce conflict
If the SLR parsing table of a grammar G has a conflict, we say that that grammar is not SLR
grammar.
Constructing Canonical LR(1) Parsing tables
• In SLR method, the state i makes a reduction by Aα→ when the current token isa:
– if the Aα→. in the Ii and a is FOLLOW(A)
• In some situations, βA cannot be followed by the terminal a in a right-sentential form when
αβ and the state i are on the top stack. This means that making reduction in this
case is not correct.
S → AaAb
S → BbBa
S⇒AaAb⇒Aab⇒ab S⇒BbBa⇒Bba⇒ba
A → ε Aab ⇒ ε ab Bba ⇒ ε ba
B → ε AaAb ⇒ Aa ε b BbBa ⇒ Bb ε a
LR(1) Item
• To avoid some of invalid reductions, the states need to carry moreinformation.
• Extra information is put into a state by including a terminal symbol as a second component
in an item.
• A LR(1) item is: item
A → α.β,a where a is the look-head of the LR(1) (a is a terminal or end-marker.)
• When β ( in the LR(1) item A → α.β,a ) is not empty, the look-head does not haveany
affect.
• When β is empty (A → α.,a ), we do the reduction by Aα→ only if the next input symbol
is a (not for any terminal in FOLLOW(A)).
• A state will contain A → α.,a1 where {a1,...,an} ⊆ FOLLOW(A)
...
A → α.,an
Closure and GOTO Operations
closure(I) is: ( where I is a set of LR(1) items
every LR(1) item in I is in closure(I)

if Aα→.Bβ,a in closure(I) and Bγ→ is a production rule of G; then B→.γ,b will be in the closure(I)
for each terminal b in FIRST(βa) .
If I is a set of LR(1) items and X is a grammar symbol (terminal or non-terminal), then goto(I,X) is
defined as follows:
If A → α.Xβ,a in I then every item in closure({A → αX.β,a}) will be in goto(I,X).

Construction of The Canonical LR(1) Collection
Algorithm:
C is { closure({S’→.S,$}) }
repeat the followings until no more set of LR(1) items can be added to C.
for each I in C and each grammar symbol X
if goto(I,X) is not empty and not in C
add goto(I,X) to C
GOTO function is a DFA on the sets in C.
A set of LR(1) items containing the following items
A → α.β,a1
...
A → α.β,an
can be written as A →α.β,a1/a2/.../an
Example:
Parsing Table
1. Construct the canonical collection of sets of LR(1) items forG’.
C←{I0,...,In}
2. Create the parsing action table as follows

a. If a is a terminal, Aα→.aβ,b in Ii and goto(Ii,a)=Ij then action[i,a] is shift j. b. If Aα→.,a is in Ii
, then action[i,a] is reduce Aα→ where A≠S’.
c. If S’→S.,$ is in Ii , then action[i,$] is accept.
d. If any conflicting actions generated by these rules, the grammar is not LR(1).
3. Create the parsing goto table
a. for all non-terminals A, if goto(Ii,A)=Ij then goto[i,A]=j
4. All entries not defined by (2) and (3) are errors.
5. Initial state of the parser containsS’→.S,$
Example:
For the above used Grammar, the parse table is as follows:
id * = $ S L R
0 S5 s4 1 2 3
1 acc
2 s6 r5
3 r2
4 S5 s4 8 7
5 r4 r4
6 s12 s11 10 9
7 r3 r3
8 r5 r5
9 r1
10 r5
11 s12 s11 10 13
12 r4
13 r3

Constructing LALR Parsing tables
• LALR stands for LookAhead LR.
• LALR parsers are often used in practice because LALR parsing tables are smaller than
Canonical LR parsing tables.
• The number of states in SLR and LALR parsing tables for a grammar G are equal.
• But LALR parsers recognize more grammars than SLR parsers.
• yacc creates a LALR parser for the given grammar.
• A state of LALR parser will be again a set of LR(1) items.
Canonical LR(1) Parser -> LALR Parser shrink # of states
• This shrink process may introduce a reduce/reduce conflict in the resulting LALRparser.
In that case the grammar is NOT LALR.
• This shrink process cannot produce a shift/reduce conflict.
The Core of A Set of LR(1) Items
• The core of a set of LR(1) items is the set of its firstcomponent.
Example:
S → L.=R,$ -> S → L.=R R → L.,$ R → L.
• We will find the states (sets of LR(1) items) in a canonical LR(1) parser with samecores.
Then we will merge them as a single state.
Example:
I1:L → id.,= I12: L → id.,=
L → id.,$ I2:L → id.,$ have same core, merge them
• We will do this for all states of a canonical LR(1) parser to get the states of theLALR
parser.
• In fact, the number of the states of the LALR parser for a grammar will be equal to the
number of states of the SLR parser for that grammar.
Parsing Tables
• Create the canonical LR(1) collection of the sets of LR(1) items for the given grammar.
• Find each core; find all sets having that same core; replace those sets having same cores
with a single set which is their union.
C={I0,...,In} ->C’={J1,...,Jm} where m ≤ n
• Create the parsing tables (action and goto tables) same as the construction of the
parsing tables of LR(1) parser.
– Note that: If J=I1 ∪ ... ∪ Ik since I1,...,Ik have same cores

->cores of goto(I1,X),...,goto(I2,X) must be same.
–So, goto(J,X)=K where K is the union of all sets of items having same cores as
goto(I1,X).
• If no conflict is introduced, the grammar is LALR(1) grammar. (We may only
introduce reduce/reduce conflicts; we cannot introduce a shift/reduce conflict)
Shift/Reduce Conflict
• We say that we cannot introduce a shift/reduce conflict during the shrink process forthe
creation of the states of a LALR parser.
• Assume that we can introduce a shift/reduce conflict. In this case, a state of LALRparser
must have:
A → α.,a and B → β.aγ,b
• This means that a state of the canonical LR(1) parser must have: A → α.,a and
B → β.aγ,c
But, this state has also a shift/reduce conflict. i.e. The original canonical
LR(1) parser has a conflict.
(Reason for this, the shift operation does not depend on Lookaheads)
Reduce/Reduce Conflict
But, we may introduce a reduce/reduce conflict during the shrink process for the creation of the
states of a LALR parser.
I1 : A → α.,a I2: A → α.,b
B → β.,b B → β.,c
⇓
I12: A → α.,a/b - > reduce/reduceconflict
B → β.,b/c

Example:
For the above Canonical LR Parsing table, we can get the following LALR(1) collection

Using Ambiguous Grammars
• All grammars used in the construction of LR-parsing tables must be un-ambiguous.
• Can we create LR-parsing tables for ambiguous grammars?
– Yes, but they will have conflicts.
– We can resolve these conflicts in favor of one of them to disambiguate
the grammar.
– At the end, we will have again an unambiguous grammar.
• Why we want to use an ambiguous grammar?
– Some of the ambiguous grammars are much natural, and a
corresponding unambiguous grammar can be very complex.
– Usage of an ambiguous grammar may eliminate unnecessaryreductions.
Example:
E → E+T | T
E → E+E | E*E |
(E) | id T → T*F
| F
F → (E) | id
Sets of LR(0) Items for Ambiguous Grammar
SLR-Parsing Tables for Ambiguous Grammar
FOLLOW(E) = { $,+,*,) }
State I7 has shift/reduce conflicts for symbols + and *.
when current token is +
shift ->+ is right-associative reduce ->+ is left-associative
when current token is *
shift - > * has higher

precedence than + reduce->+
has higher precedence than *
State I8 has shift/reduce conflicts for symbols +
and *. when current token is *
shift ->* is right-associative reduce ->* isleft-associative
when current token is +
shift - > + has higher
precedence than * reduce->*
has higher precedence than +
id + * ( ) $ E
0 s3 s2 1
1 s4 s5 acc
2 s3 s2 6
3 r4 r4 r4 r4
4 s3 s2 7
5 s3 s2 8
6 s4 s5 s9
7 r1 s5 r1 r1
8 r2 r2 r2 r2
9 r3 r3 r3 r3

Module-2
SYNTAX-DIRECTED TRANSLATION
• Grammar symbols are associated with attributes to associate information with the programming
language constructs that they represent.
• Values of these attributes are evaluated by the semantic rules associated with theproduction
rules.
• Evaluation of these semantic rules:
– may generate intermediate codes
– may put information into the symbol table
– may perform type checking
– may issue error messages
– may perform some other activities
– In fact, they may perform almost any activities.
• An attribute may hold almost anything.
A string, a number, a memory location, a complex record.
• Evaluation of a semantic rule defines the value of an attribute. But a semantic rule may also have
some side effects such as printing a value.
Example:
Production Semantic Rule Program Fragment
L → E return
1
print(E.val)
1
print(val[top-1])
val[ntop] = val[top-2] + val[top]
E → E + T E.val = E .val + T.val
E → T
1
E.val = T.val
1 val[ntop] = val[top-2] * val[top]
T → T * F T.val = T .val * F.val
T → F T.val = F.val
F → ( E ) F.val = E.val val[ntop] = val[top-1]
F → digit F.val = digit.lexval val[top] =digit.lexval
• Symbols E, T, and F are associated with an attribute val.
• The token digit has an attribute lexval (it is assumed that it is evaluated by the lexical analyzer).
• The Program Fragment above represents the implementation of the semantic rule for a bottom-up
parser.
• At each shift of digit, we also push digit.lexval into val-stack.
• At all other shifts, we do not put anything into val-stack because other terminals do not have
attributes (but we increment the stack pointer for val-stack).
• The above model is suited for a desk calculator where the purpose is to evaluate andto
generate code.
1. Intermediate Code Generation
• Intermediate codes are machine independent codes, but they are close to machineinstructions.
• The given program in a source language is converted to an equivalent program in an
intermediate language by the intermediate code generator.
• Intermediate language can be many different languages, and the designer of thecompiler
decides this intermediate language.
– syntax trees can be used as an intermediate language.
– postfix notation can be used as an intermediate language.
– three-address code (Quadraples) can be used as an intermediate language

• we will use quadraples to discuss intermediate code generation
• quadraples are close to machine instructions, but they are not actual machine instructions.
2 Syntax Tree
Syntax Tree is a variant of the Parse tree, where each leaf represents an operand and each interior
node an operator.
Example:
Production Semantic Rule
E → E1 op E2 E.val = NODE (op, E1.val, E2.val) E → (E1) E.val = E1.val
E → - E1 E.val = UNARY ( - , E1.val) E → id E.val = LEAF ( id )
A sentence a*(b+d) would have the following syntax tree:
Postfix Notation
Postfix Notation is another useful form of intermediate code if the language is mostly expressions.
Example:
Production Semantic Rule Program Fragment
print op print id
E → E1 op E2
E → (E1) E → id
3 Three Address Code
E.code = E1.code || E2.code || op
E.code = E1.code
E.code = id
• We use the term “three-address code” because each statement usually contains three addresses
(two for operands, one for the result).
• The most general kind of three-address codeis:
x := y op z
where x, y and z are names, constants or compiler-generated temporaries; op is any operator.
• But we may also the following notation for quadraples (much better notation because it looks likea
machine code instruction)
op y,z,x
apply operator op to y and z, and store the result in x.

4 Representation of three-address codes
Three-address code can be represented in various forms viz. Quadruples, Triples and
Indirect Triples. These forms are demonstrated by way of an example below. Example:
A = -B * (C + D) Three-Address code is as follows:
T1 = -B
T2 = C + D T3 = T1 * T2
A = T3
Quadruple:
Operator Operand 1 Operand 2 Result
(1) - B T1
(2) + C D T2
(3) * T1 T2 T3
(4) = A T3
Triple:
Operator Operand 1 Operand 2
(1) - B
(2) + C D
(3) * (1) (2)
(4) = A (3)
Indirect Triple:
Statement
(0) (56)
(1) (57)
(2) (58)
(3) (59)
Operator Operand 1 Operand 2
(56) - B
(57) + C D
(58) * (56) (57)
(59) = A (58)

Translation of Assignment Statements
A statement A := - B * (C + D) has the following three-address translation: T1 := - B
T2 := C+D
T3 := T1* T2
A := T3
Production Semantic Action
S → id := E S.code = E.code || gen( id.place = E.place )
E → E1 + E2 E.place = newtemp();
E.code = E1.code || E2.code || gen( E.place = E1.place + E2.place )
E → E1 * E2 E.place = newtemp();
E.code = E1.code || E2.code || gen( E.place = E1.place * E2.place )
E → - E1 E.place = newtemp();
E.code = E1.code || gen( E.place = - E1.place )
E → ( E1 ) E.place = E1.place; E.code = E1.code
E → id E.place = id.place; E.code = null
1. Translation of Boolean Expressions
Grammar for Boolean Expressions is: E->E or E
E->E and E
E->not E E->( E ) E->id
E->id relop id
There are two representations viz. Numerical and Control-Flow.
Numerical Representation of Boolean
o TRUE is denoted by 1 and FALSE by 0.
o Expressions are evaluated from left to right, in a manner similar to arithmetic expressions.
Example:
The translation for A or B and C is the three-address sequence:
T1 := B and C T2 := A or T1
Also, the translation of a relational expression such as A < B is the three-address sequence:
(1) if A < B goto (4) (2) T := 0
(3) goto (5) (4) T := 1 (5)

Therefore, a Boolean expression A < B or C can be translated as: (1) if A < B goto (4)
(2) T1 := 0
(3) goto (5) (4) T1 := 1
(5) T2 := T1 or C
E->E1 or E2 T = newtemp ();
E.place = T;
Gen (T = E1.place or E2.place)
E->E1 and E2 T = newtemp (); E.place = T;
Gen (T = E1.place and E2.place)
E->not E1 T = newtemp (); E.place = T;
Gen (T = not E1.place)
E → ( E1 ) E.place = E1.place; E.code = E1.code
E → id E.place = id.place; E.code = null
E->id1 relop id2 T = newtemp (); E.place = T;
Gen (if id1.place relop id2.place goto NEXTQUAD+3) Gen (T = 0)
Gen (goto NEXTQUAD+2)
` Gen (T = 1)
o Quadruples are being generated and NEXTQUAD indicates the next available entry inthe
quadruple array.
Control-Flow Representation of Boolean Expressions
o If we evaluate Boolean expressions by program position, we may be able to avoidevaluating
the entire expressions.
o In A or B, if we determine A to be true, we need not evaluate B and can declare the entire
expression to be true.
o In A and B, if we determine A to be false, we need not evaluate B and can declare the entire
expression to be false.
o A better code can thus be generated using the above properties.
Example:
The statement if (A<B || C<D) x = y + z; can be translated as
(1) if A<B goto (4) (2) if C<D goto (4) (3) goto (6)
(4) T = y + z
(5) X = T (6)
Here (4) is a true exit and (6) is a false exit of the Boolean expressions.

Generating 3-address code for Numerical Representation of Boolean expressions
o Consider a production E->E1 or E2 that represents the OR Boolean expression. If E1 is
true, we know that E is true so we make the location TRUE for E1 be the same as TRUE for E. If E1
is false, then we must evaluate E2, so we make FALSE for E1 be the first statement in the code for
E2. The TRUE and FALSE exits can be made the same as the TRUE and FALSE exits of E,
respectively.
o Consider a production E->E1 and E2 that represents the AND Boolean expression.If
E1 is false, we know that E is false so we make the location FALSE for E1 be thesame
as FALSE for E. If E1 is true, then we must evaluate E2, so we make TRUE for E1 be the first
statement in the code for E2. The TRUE and FALSE exits can be made the same as the TRUE and
FALSE exits of E, respectively.
o Consider the production E->not E that represents the NOT Boolean expression. We
may simply interchange the TRUE and FALSE exits of E1 to get the TRUE and FALSE
exits of E.
o To generate quadruples in the manner suggested above, we use three functions- Makelist,
Merge and Backpatch that shall work on the list of quadruples as suggested by their name.
o If we need to proceed to E2 after evaluating E1, we have an efficient way of doing this by
modifying our grammar as follows:
E->E or M E
E->E and M E E->not E
E->( E ) E->id
E->id relop id
M->ε
The translation scheme for this grammar would as follows:
E->E1 or M E2 BACKPATCH (E1.FALSE, M.QUAD); E.TRUE = MERGE
(E1.TRUE, E2.TRUE); E.FALSE = E2.FALSE;
E->E1 and M E2 BACKPATCH (E1.TRUE, M.QUAD); E.TRUE = E2.TRUE;
E.FALSE = MERGE (E1.FALSE, E2.FALSE);
E->not E1 E.TRUE = E1.FALSE; E.FALSE = E1.TRUE;

E->( E1 ) E.TRUE = E1.TRUE; E.FALSE = E1.FALSE;
E->id E.TRUE = MAKELIST (NEXTQUAD); E.FALSE = MAKELIST
(NEXTQUAD + 1); GEN (if id.PLACE goto _ );
GEN (goto _ );
E->id1 relop id2 E.TRUE = MAKELIST (NEXTQUAD); E.FALSE = MAKELIST
(NEXTQUAD + 1); GEN ( if id1.PLACE relop id2.PLACE goto _ );
GEN (goto _ );
M->ε M.QUAD = NEXTQUAD;
Example:
For the expression P<Q or R<S and T, the parsing steps and corresponding semantic actions are
shown below. We assume that NEXTQUAD has an initial value of 100.
Step 1: P<Q gets reduced to E by E->id relop id. The grammatical form is E1 or R<S
and T.
We have the following code generated (Makelist).
100: if P<Q goto _
101: goto _
E1 is true if goto of 100 is reached and false if goto of 101 is reached.
Step 2: R<S gets reduced to E by E->id relop id. The grammatical form is E1 or E2 and
T.
102: if R<S goto _
103: goto _
E2 is true if goto of 102 is reached and false if goto of 103 is reached. Step 3: T gets reduced to E
by E->id. The grammatical form is E1 or E2 and E3.
104: if T goto _
105: goto _
E3 is true if goto of 104 is reached and false if goto of 105 is reached.
Step 4: E2 and E3 gets reduced to E by E->E and E. The grammatical form is E1 or E4.
We have no new code generated but changes are made in the already generated code (Backpatch).

100: if P<Q goto _
101: goto _
102: if R<S goto 104
103: goto _
104: if T goto _
105: goto _
E4 is true only if E3.TRUE (goto of 104) is reached. E4 is false if E2.FALSE (goto of 103) or
E3.FALSE (goto of 105) is reached (Merge).
Step 5: E1 or E4 gets reduced to E by E->E or E. The grammatical form is E.
We have no new code generated but changes are made in the already generated code (Backpatch).
100: if P<Q goto _
101: goto 102
102: if R<S goto 104
103: goto _
104: if T goto _
105: goto _
E is true only if E1.TRUE (goto of 100) or E2.TRUE (goto of 104) is reached (Merge). E is false if
E4.FALSE (goto of 103 or 105) is reached.
1. Mixed Mode Expressions
o Boolean expressions may in practice contain arithmetic sub expressions e.g. (A+B)>C.
o We can accommodate such sub-expressions by adding the production E->E op E toour
grammar.
o We will also add a new field MODE for E. If E has been achieved after reductionusing
the above (arithmetic) production, we make E.MODE = arith, otherwise make E.MODE =
bool.
o If E.MODE = arith, we treat it arithmetically and use E.PLACE. If E.MODE = bool, we treat
it as Boolean and use E.FALSE and E.TRUE.

Statements that Alter Flow of Control
->In order to implement goto statements, we need to define a LABEL for a statement. A
production can be added for this purpose:
S - > LABEL : S LABEL- > id
->The semantic action attached with this production is to record the LABEL and its value
(NEXTQUAD) in the symbol table. It will also Backpatch any previous references to this LABEL with
its current value.
->Following grammar can be used to incorporate structured Flow-of-control constructs: (1) S->if E
then S
(2) S->if E then S else S
(3) S->while E do S (4) S->begin L end
(5) S->A
(6) L->L ; S (7) L->S
Here, S denotes a statement, L a statement-list, A an assignment statement and E a
Boolean-valued expression.
1. Translation Scheme for statements that alter flow of control
->We introduce a new field NEXT for S and L like TRUE and FALSE for E. S.NEXT and L.NEXT are
respectively the pointers to a list of all conditional and unconditional jumps to the quadruple
following statement S and statement-list L in execution order.
->We also introduce the marker non-terminal M as in the case of grammar for Boolean expressions.
This is put before statement in if-then, before both statements in if-then-else
and the statement in while-do as we may need to proceed to them after evaluating E. In
case of while-do, we also need to put M before E as we may need to come back to it afterexecuting
S.
->In case of if-then-else, if we evaluate E to be true, first S will be executed. After this we should
ensure that instead of second S, the code after this if-then-else statement be executed. We thus
place another non-terminal marker N after first S i.e. before else.
The grammar now is as follows:
(1) S->if E then M S
(2) S->if E then M S N else M S (3) S->while M E do M S
(4) S->begin L end
(5) S->A
(6) L->L ; M S (7) L->S
(8) M->ε
(9) N->ε
The translation scheme for this grammar would as follows:

S->if E then M S1 BACKPATCH (E.TRUE, M.QUAD) S.NEXT =MERGE
(E.FALSE, S1.NEXT)
S->if E then M1 S1 N else M2 S2 BACKPATCH (E.TRUE, M1.QUAD) BACKPATCH
(E.FALSE,
M2.QUAD)
S.NEXT = MERGE (S1.NEXT, N.NEXT, S2.NEXT)
S->while M1 E do M2 S1 BACKPATCH (S1.NEXT, M1.QUAD) BACKPATCH
(E.TRUE,
M2.QUAD) S.NEXT = E.FALSE
GEN (goto M1.QUAD)
S->begin L end S.NEXT = L.NEXT
S->A S.NEXT = MAKELIST ( )
L->L1 ; M S BACKPATCH (L1.NEXT, M.QUAD) L.NEXT =S.NEXT
L->S L.NEXT = S.NEXT
M->ε M.QUAD = NEXTQUAD
N->ε N.NEXT = MAKELIST (NEXTQUAD) GEN (goto _)

Postfix Translations
In an production A->α, the translation rule of A.CODE consists of the concatenation of the CODE
translations of the non-terminals in α in the same order as the non-terminals appear in α.
Productions can be factored to achieve Postfix form.
1. Postfix translation of while statement
The production
S->while M1 E do M2 S1 can be factored as
S->C S1
C->W E do
W->while
A suitable translation scheme would be
W->while W.QUAD = NEXTQUAD
C->W E do C.QUAD = W.QUAD
BACKPATCH (E.TRUE, NEXTQUAD) C.FALSE = E.FALSE
S->C S1 BACKPATCH (S1.NEXT, C.QUAD) S.NEXT =C.FALSE
GEN (goto C.QUAD)
2. Postfix translation of for statement
Consider the following production which stands for the for-statement
S->for L = E1 step E2 to E3 do S1
Here L is any expression with l-value, usually a variable, called the index. E1, E2 and E3 are
expressions called the initial value, increment and limit, respectively. Semantically, the for statement
is equivalent to the following program.
Begin
INDEX = addr ( L );
*INDEX = E1; INCR = E2; LIMIT = E3;
while *INDEX <= LIMIT do begin
end
end
code for statement S1;
*INDEX = *INDEX + INCR;

The non-terminals L, E1, E2, E3 and S appear in the same order as in the production. The
production can be factored as
(1) F->for L
(2) T->F = E1 by E2 to E3 do
(3) S->T S1
A suitable translation scheme would be
F->for L F.INDEX = L.INDEX
T->F = E1 by E2 to E3 do GEN (*F.INDEX = E1.PLACE) INCR = NEWTEMP ( )
LIMIT = NEWTEMP ( ) GEN (INCR = E2.PLACE)
GEN (LIMIT = E3.PLACE)
T.QUAD = NEXTQUAD
T.NEXT = MAKELIST (NEXTQUAD) GEN (IF *F.INDEX >
LIMIT goto _) T.INDEX = F.INDEX
T.INCR = INCR
S->T S1 BACKPATCH (S1.NEXT, NEXTQUAD) GEN (*T.INDEX =
*T.INDEX + T.INCR) GEN (goto T.QUAD)
S.NEXT = T.NEXT

Array references in arithmetic expressions
Elements of arrays can be accessed quickly if the elements are stored in a block of consecutive
locations.
For a one-dimensional array A:
Base (A) is the address of the first location of the array A,
width is the width of each arrayelement.
low is the index of the first arrayelement
location of A[i] = baseA+(i-low)*width baseA+(i-low)*width
can be re-written as
i*width + (baseA-low*width)
should be computed at run-time can be computed at compile-time
So, the location of A[i] can be computed at the run-time by evaluating the formula i*width+c where c
is (baseA-low*width) which is evaluated at compile-time.
Intermediate code generator should produce the code to evaluate this formula i*width+c
(one multiplication and one addition operation).
A two-dimensional array can be stored in either row-major (row-by-row) or column-major
(column-by-column).
Most of the programming languages use row-major method.
The location of A[i1,i2] is baseA+ ((i1-low1)*n2+i2-low2)*width
baseA is the location of the array A.
low1 is the index of the first row
low2 is the index of the first column
n2 is the number of elements in each row
width is the width of each array element
Again, this formula can be re-written as
((i1*n2)+i2)*width + (baseA-((low1*n1)+low2)*width)
should be computed at run-time can be computed at compile-time
Arrays of any dimension can be dealt in a similar but general manner.
In general, the location of A[i1,i2,...,ik] is
(( ... ((i1*n2)+i2) ...)*nk+ik)*width + (baseA- ((...((low1*n1)+low2)...)*nk+lowk)*width)

So, the intermediate code generator should produce the codes to evaluate the following formula (to
find the location of A[i1,i2,...,ik]) :
(( ... ((i1*n2)+i2) ...)*nk+ik)*width + c
To evaluate the (( ... ((i1*n2)+i2) ...)*nk+ik portion of this formula, we can use the recurrence
equation:
e1 = i1
em = em-1 * nm + im
1. Grammar and Translation Scheme
The grammar and suitable translation scheme for arithmetic expressions with array references is as
given below:
S → L = E if (L.OFFSET = NULL) then GEN (L.PLACE = E.PLACE)
else GEN(L.PLACE [ L.OFFSET ] = E.PLACE)
E → E1 + E2 E.PLACE = NEWTEMP ( )
GEN (E.PLACE = E1.PLACE + E2.PLACE) E → ( E1 )
E.PLACE = E1.PLACE
E → L if (L.OFFSET = NULL) then E.PLACE = L.PLACE
else {E.PLACE = NEWTEMP ( ); GEN (E.PLACE =
L.PLACE[L.OFFSET])}
L → id L.PLACE = id.PLACE L.OFFSET = NULL
L → ELIST ] L.PLACE = NEWTEMP( ) L.OFFSET = NEWTEMP ( )
GEN (L.PLACE = ELIST.ARRAY - C)
GEN (L.OFFSET = ELIST.PLACE * WIDTH
(ELIST.ARRAY))
ELIST → ELIST1 , E ELIST.ARRAY = ELIST1.ARRAY ELIST.PLACE =
NEWTEMP (
) ELIST.NDIM = ELIST1.NDIM + 1
GEN (ELIST.PLACE = ELIST1.PLACE * LIMIT
(ELIST.ARRAY, ELIST.NDIM)) GEN (ELIST.PLACE =
E.PLACE + ELIST.PLACE)
ELIST → id [ E ELIST.ARRAY = id.PLACE ELIST.PLACE = E.PLACE E = 1
Here, NDIM denotes the number of dimensions, LIMIT (AARAY, i) function returns the upper limit
along the ith dimension of ARRAY i.e. ni, WIDTH (ARRAY) returns the number of bytes for one
element of ARRAY.

2. Declarations
Following is the grammar and a suitable translation scheme for declaration statements:
D->integer, id ENTER (id.PLACE, integer) D.ATTR = integer
D->real, id ENTER (id.PLACE, real) D.ATTR = real
D->D1, id ENTER (id.PLACE, D1.ATTR) D.ATTR = D1.ATTR
Here, ENTER makes the entry into symbol table while ATTR is used to trace the data type.
3. Procedure Calls
Following is the grammar and a suitable translation scheme for Procedure Calls:
S->call id (ELIST) for each item p on QUEUE do
GEN (param p)
GEN (call id.PLACE)
ELIST->ELIST, E append E.PLACE to the end of QUEUE
ELIST->E initialize QUEUE to contain only E.PLACE QUEUE is used to store
the list of parameters in the procedure call.
4. Case Statements
The case statement has following syntax:
switch E
begin
end
case V1: S1 case V2: S2
.
case Vn-1: Sn-1 default: Sn The translation scheme for this shownbelow:
code to evaluate E into T
goto TEST L1: code for S1
goto NEXT L2: code for S2
goto NEXT
.
.
Ln-1: code for Sn-1 goto NEXT
Ln: code for Sn goto NEXT
TEST: if T = V1 goto L1
If T = V2 goto L2
.
if T = Vn-1 goto Ln-1 goto Ln

SYMBOL
TABLES
• Symbol table is a data structure meant to collect information about names appearing in the
source program.
• It keeps track about the scope/binding information about names.
• Each entry in the symbol table has a pair of the form (name and information).
• Information consists of attributes (e.g. type, location) depending on the language.
• Whenever a name is encountered, it is checked in the symbol table to see if already occurs. If
not, a new entry is created.
• In some cases, the symbol table record is created by the lexical analyzer as soon as the name
is encountered in the input, and the attributes of the name are entered when the
declarations are processed.
• If same name can be used to denote different program elements in the same block, the
symbol table record is created only when the name’s syntactic role isdiscovered.
Operations on a Symbol Table
• Determine whether a given name is in the table
• Add a new name to the table
• Access information associated to a given name
• Add new information for a given name
• Delete a name (or a group of names) from the table
Implementation
• Each entry in a symbol table can be implemented as a record that consists of severalfields.
• The entries in symbol table records are not uniform and depend on the program element
identified by the name.
• Some information about the name may be kept outside of the symbol table recordand/or
some fields of the record may be left vacant for the reason of uniformity. A pointer to this
information may be stored in the record.
• The name may be stored in the symbol table record itself, or it can be stored in a separate
array of characters and a pointer to it in the symbol table.
• The information about runtime storage location, to be used at the time of code generation,is
kept in the symbol table.
• There are various approaches to symbol table organization e.g. Linear List, Search Treeand
Hash Table.
Linear List
• It is the simplest approach in symbol table organization.
• The new names are added to the table in the order they arrive.
• A name is searched for its existence linearly.
• The average number of comparisons required are proportional to 0.5*(n+1) where n=number
of entries in the table.
• It takes less space but more access time.
Search Tree
• It is more efficient than Linear Trees.
• We provide two links- left and right, which point to record in the search tree.

• A new name is added at a proper location in the tree such that it can be accessed
alphabetically.
• For any node name1 in the tree, all names accessible by following the left link precede name1
alphabetically.
• Similarly, for any node name1 in the tree, all names accessible by following the rightlink
succeed name1 alphabetically.
• The time for adding/searching a name is proportional to (m+n) log2 n.
Hash Table
• A hash table is a table of k-pointers from 0 to k-1 that point to the symbol table andrecord
within the symbol table.
• To search a value, we find out the hash value of the name by applying suitable hashfunction.
• The hash function maps the name into an integer value between 0 and k-1 and uses it asan
index in the hash table to search the list of the table records that are built on that hashindex.
• To add a non-existent name, we create a record for that name and insert it at the head of the
list.
32.3 Scope Information
• Each name possesses a region of validity within the source program called the scope of that
name.
• The rules governing the scope of names in a block-structured language are asfollows:
• A name declared within block B is valid only within B.
• If block B1 is nested within B2, then any name that is valid for B2 is also validfor
B1, unless identifier for that name is re-declared in B1.
• These rules require a more complicated symbol table organization that simply a list of
associations between names and attributes.
• One technique is to keep multiple symbol tables for each active block:
• Each table is list of names and their associated attributes, and the tables are organized onstack.
• Whenever a new block is entered, a new table is pushed on the stack.
• When a declaration is compiled, the table on the stack is searched for the name.
• If name is not found it is inserted.
• When a reference is translated, it is searched in all tables starting from top.
• Another technique is to represent scope information in the symbol table.
• Store the nesting depth of each procedure block in the symbol table.
• Use the (procedure name, nesting depth) pair as the key to accessingthe
information from the table.
• The nesting depth of a procedure is a number that is obtained by starting with a value of one for
the main and adding one to it every time we go from an enclosing to an enclosed procedure. It
counts the number of procedure in the referencing environment of a procedure.

A source code can directly be translated into its target machine code, then why at all we need to
translate the source code into an intermediate code which is then translated to its target code? Let us
see the reasons why we need an intermediate code.
 If a compiler translates the source language to its target machine language without having the
option for generating intermediate code, then for each new machine, a full native compiler is
required.
 Intermediate code eliminates the need of a new full compiler for every unique machine by
keeping the analysis portion same for all the compilers.
 The second part of compiler, synthesis, is changed according to the target machine.
 It becomes easier to apply the source code modifications to improve code performance by
applying code optimization techniques on the intermediate code.
Intermediate Representation
Intermediate codes can be represented in a variety of ways and they have their own benefits.
 High Level IR - High-level intermediate code representation is very close to the source language
itself. They can be easily generated from the source code and we can easily apply code
modifications to enhance performance. But for target machine optimization, it is less preferred.
 Low Level IR - This one is close to the target machine, which makes it suitable for register and
memory allocation, instruction set selection, etc. It is good for machine-dependent optimizations.
Intermediate code can be either language specific (e.g., Byte Code for Java) or language independent
(three-address code).
Three-Address Code
Intermediate code generator receives input from its predecessor phase, semantic analyzer, in the form
of an annotated syntax tree. That syntax tree then can be converted into a linear representation, e.g.,

postfix notation. Intermediate code tends to be machine independent code. Therefore, code generator
assumes to have unlimited number of memory storage (register) to generate code.
For example:
The intermediate code generator will try to divide this expression into sub-expressions and then
generate the corresponding code.
r being used as registers in the target program.
A three-address code has at most three address locations to calculate the expression. A three-address
code can be represented in two forms : quadruples and triples.
Quadruples
Each instruction in quadruples presentation is divided into four fields: operator, arg1, arg2, and result.
The above example is represented below in quadruples format:
Op arg1 arg2 result
* c d r1
+ b r1 r2
+ r2 r1 r3
= r3 a
Triples
Each instruction in triples presentation has three fields : op, arg1, and arg2.The results of respective
sub-expressions are denoted by the position of expression. Triples represent similarity with DAG and
syntax tree. They are equivalent to DAG while representing expressions.
a = b + c * d;
r1 = c * d;
r2 = b + r1;
a = r2

Op arg1 arg2
* c d
+ b (0)
+ (1) (0)
= (2)
Triples face the problem of code immovability while optimization, as the results are positional and
changing the order or position of an expression may cause problems.
Indirect Triples
This representation is an enhancement over triples representation. It uses pointers instead of position to
store results. This enables the optimizers to freely re-position the sub-expression to produce an
optimized code.
Declarations
A variable or procedure has to be declared before it can be used. Declaration involves allocation of
space in memory and entry of type and name in the symbol table. A program may be coded and
designed keeping the target machine structure in mind, but it may not always be possible to accurately
convert a source code to its target language.
Taking the whole program as a collection of procedures and sub-procedures, it becomes possible to
declare all the names local to the procedure. Memory allocation is done in a consecutive manner and
names are allocated to memory in the sequence they are declared in the program. We use offset
variable and set it to zero {offset = 0} that denote the base address.
The source programming language and the target machine architecture may vary in the way names are
stored, so relative addressing is used. While the first name is allocated memory starting from the
memory location 0 {offset=0}, the next name declared later, should be allocated memory next to the first
one.
Example:
We take the example of C programming language where an integer variable is assigned 2 bytes of
memory and a float variable is assigned 4 bytes of memory.

To enter this detail in a symbol table, a procedure enter can be used. This method may have the
following structure:
This procedure should create an entry in the symbol table, for variable name, having its type set to type
and relative address offset in its data area.
int a;
float b;
Allocation process:
{offset = 0}
int a;
id.type = int
id.width = 2
offset = offset + id.width
{offset = 2}
float b;
id.type = float
id.width = 4
offset = offset + id.width
{offset = 6}
enter(name, type, offset)

Directed AcyclicGraph
Directed Acyclic Graph (DAG) is a tool that depicts the structure of basic blocks, helps to see the flow of
values flowing among the basic blocks, and offers optimization too. DAG provides easy transformation
on basic blocks. DAG can be understood here:
 Leaf nodes represent identifiers, names or constants.
 Interior nodes represent operators.
 Interior nodes also represent the results of expressions or the identifiers/name where the values
are to be stored or assigned.
Example:
[t0 = a + b]
[t1 = t0 + c]
[d = t0 + t1]
Boolean Expressions and Control Flow
BOOLEAN EXPRESSIONS are constructed using boolean operators. We will consider here the following
rules.
E E E
E E E
t0 = a + b
t1 = t0 +c
d = t0 + t1

E E
E E
E
E
E
 Boolean expressions are used as conditions for statements changing the flow of control.
 Evaluation of boolean expressions can be optimized if it is sufficient to evaluate a part of the
expression that determines its value.
 When translating Boolean expressions into three-address code, we can use two different
methods.
Numerical method.
Assign numerical values to true and false and evaluate the expression analogously to an
arithmetic expression. This is convenient for boolean expressions which are not involved in flow
of control constructs.
Jump method.
Evaluate a boolean expression E as a sequence of conditional and unconditional jumps to
location E.true (if E is true) or to E.false. To be detailed shortly.
WHILE STATEMENTS WITH THE NUMERICAL METHOD.
The following syntax-directed translation generates code for a while statement.
S E S1
S.begin := newlabel
S.after := newlabel
code1 := generate(S.begin ':') | | E.code | |
code2 := generate('if ' E.place '= 0 ' 'goto' S.after) | | S1.code
code3 := generate('goto' S.begin) | | generate(S.after)
S.code := code1 | | code2 | | code3
With respect to the previous syntax-directed translation
 we have added two new synthesized attributes S.begin and S.after.
 When the value of E becomes zero, control leaves the while statement

FLOW OF CONTROL STATEMENTS WITH THE JUMP METHOD.
We will consider here the following rules.
S
E S1
S
E S1 S2
S
E S1
 In each of these productions, E is the boolean expression to be translated.
 The boolean expression E is associated with two labels (that are inherited attributes in the
following semantic rules)
o E.true the label to which control flows if E is true,
o E.false the label to which control flows if E is false.
 In each of these productions, S is a flow of control statement associated with two attributes
o S.next which is a label that is attached to the first 3-address statement to be executed
after the code for S , S.next is an inherited attribute,
o S.code is the translation code for S, as usual it is a synthesized attribute.
S E S1
E.true := newlabel
E.false := S.next
S1.next := S.next
S.code := E.code | | generate(E.true ':') | | S1.code
S E S1 S2
E.true := newlabel
E.false := newlabel
S1.next := S.next
S2.next := S.next
code1 := E.code | | generate(E.true ':') | | S1.code
code2 := generate('goto' S.next) | |
code3 := generate(E.false ':') | | S2.code
S E S1
S.begin := newlabel
E.true := newlabel
E.false := S.next
S1.next := S.begin

code1 := generate(S.begin ':') | | E.code
code2 := generate(E.true ':') | | S1.code
code3 := generate('goto' S.begin)
Warning! The above is a syntax-directed definition: It provides formulas for the computation of the
attributes S.code (via the computations of the other attributes).
 Since several attributes are inherited and since each action above appears after itsassociated
production, this is not a translation scheme.
 However it is an L-attributed definition.
 Then its conversion into a translation scheme is obvious.
 From now on, we may present a translation scheme as a syntax-directed definition if the latteris
an L-attributed definition.
 The reason is to make large translation schemes easier to read.
TRANSLATION OF BOOLEAN EXPRESSIONS WITH THE JUMP METHOD. We will consider here the
following rules.
E E1 E2
E
E1 E2
E
E1
E (E1)
E
E
E
 Here again each symbol E is associated with two inherited attributes
o E.true the label to which control flows if E is true,
o E.false the label to which control flows if E is false.
 The attributes E.true and E.false of E will be definned when the flow of control (where E appears)
is translated.
E E1 E2
E1.true := E.true
E1.false := newlabel
E2.true := E.true
E2.false := E.false

E.code := E1.code | | generate(E1.false':') | | E2.code
E E1 E2
E1.true := newlabel
E1.false := E.false
E2.true := E.true
E2.false := E.false
E.code := E1.code | | generate(E1.true':') | | E2.code
E E1
E1.true := E.false
E1.false := E.true
E.code := E1.code
E (E1)
E1.true := E.true
E1.false := E.false
E.code := E1.code
E code1 := generate('if' .place .place 'goto' E.true)
code2 := generate('goto' E.false)
E.code := code1 | | code2
E
E.code := generate('goto' E.true)
E
E.code := generate('goto' E.false)
Example 5 Let us consider the expression
a < b
Assume that
 the attributes true and false exist for the entire expression
 as labels Ltrue and Lfalse respectively.
Then the translation is
if a < b goto Ltrue
goto Lfalse
Observations.
 Of course, this is not optimal and looks funny since the expression to translate is a sentenceof
the target language!
 But this jump method allows us to translate more involved expressions (which are not part of the
target language) like those of the following examples.

Example 6 Now consider the expression
a < b or c < d
Again assume that the labels Ltrue and Lfalse have been set for the entire expression. Then the
translation is
if a < b goto Ltrue
goto L1
L1: if c < d goto Ltrue
goto Lfalse
Example 7 Now consider the expression
a < b or (c < d and e < f)
if a < b goto Ltrue
goto L1
L1: if c < d goto L2
goto Lfalse
L2: if e < f goto Ltrue
goto Lfalse
Of course the generated code is not optimal! Indeed the second statement can be eliminated.
Example 8 Finally consider the expression
while a < b do
if c < d then
x := y + z
else
x := y - z
L1: if a < b goto L2
goto Lnext
L2: if c < d goto L3
goto L4
L3: t1 := y + z
x := t1
goto L1
L4: t2 := y - z
x := t2
goto L1
Lnext:

Backpatching
A key problem when generating code for boolean expressions and flow-of-control statements is that of
matching a jump instruction with the target of the jump. For example, the translation of the boolean
expression B in if ( B ) S contains a jump, for when B is false, to the instruction following the code for S. In
a one-pass translation, B must be translated before S is examined. Labels can be passed as inherited
attributes to where the relevant jump instructions were generated. But a separate pass is then needed to
bind labels to addresses.In backpatching, lists of jumps are passed as synthesized attributes. Specifically,
when a jump is generated, the target of the jump is temporarily left unspecified. Each such jump is put on
a list of jumps whose labels are to be filled in when the proper label can be determined. All of the jumps
on a list have the same target label.
One-Pass Code Generation Using Backpatching
Backpatching can be used to generate code for boolean expressions and flow-of-control statements in
one pass. Synthesized attributes truelist and falselist of nonterminal B are used to manage labels in
jumping code for boolean expressions. B. truelist will be a list of jump or conditional jump instructions into
which we must insert the label to which control goes if B is true. B.falselist likewise is the list of
instructions that eventually get the label to which control goes when B is false. As code is generated for
B, jumps to the true and false exits are left incomplete, with the label field unfilled. These incomplete
jumps are placed on lists pointed to by B.truelist and B.falselist, as appropriate. A statement S has a
synthesized attribute S.nextlist, denoting a list of jumps to the instruction immediately following the code
for S.
Instructions are generated into an instruction array, and labels will be indices into this array.
To manipulate lists of jumps, we use three functions: makelist(i), merge(p1,p2),backpatch(p,i)
• makelist(i) creates a new list containing only i, an index into the array of instructions; makelist returns a
pointer to the newly created list.
• merge(p1,p2) concatenates the lists pointed to by p1 and p2, and returns a pointer to the concatenated
list.
• backpatch(p,i) inserts i as the target label for each of the instructions on the list pointed to by p.
Backpatching for Boolean Expressions

Intermediate Code for Procedures
Assume that parameters are passed by value. Suppose that a is an array of integers, and that f is a
function from integers to integers. Then, the assignment n = f ( a [ i ] ) ;might translate into the following
three-address code:

1. t 1 = i * 4
2. t 2 = a [ t 1 ]
3. param t2
4. t3 = call f, 1
5. n = t 3
The grammar below adds functions to the source language

Module-3:
RUN TIME ADMINISTRATION
• The places of the data objects that can be determined at compile time will beallocated
statically.
• But the places for the some of data objects will be allocated at run-time.
The allocation of de-allocation of the data objects is managed by the run-time support package.
Run-time support package is loaded together with the generate target code.
The structure of the run-time support package depends on the semantics of the programming
language (especially the semantics of procedures in that language).
Procedure Activations
 Each execution of a procedure is called as activation of that procedure.
 An execution of a procedure starts at the beginning of the procedure body;
 When the procedure is completed, it returns the control to the point immediately after the place
where that procedure is called.
 Each execution of a procedure is called as its activation.
 Lifetime of an activation of a procedure is the sequence of the steps between the first and the last
steps in the execution of that procedure (including the other procedures called by that procedure).
 If a and b are procedure activations, then their lifetimes are either non-overlapping or are nested.
 If a procedure is recursive, a new activation can begin before an earlier activation of the same
procedure has ended.
Activation Tree
• We can use a tree (called activation tree) to show the way control enters and leaves
activations.
• In an activation tree:
– Each node represents an activation of a procedure.
– The root represents the activation of the main program.
– The node a is a parent of the node b iff the control flows from a to b.
– The node a is left to to the node b iff the lifetime of a occurs before the lifetime of b.
Example:
program main; enter main
procedure s; enter p
begin ... end; enter q
procedure p; exit q
procedure q; enter s

begin ... end; exit s
begin q; s; end; exit p
begin p; s; end; enter s
exit s
exit main
Control Stack
• The flow of the control in a program corresponds to a depth-first traversal of the activation
tree that:
– starts at the root,
– visits a node before its children, and
– recursively visits children at each node an a left-to-right order.
• A stack (called control stack) can be used to keep track of live procedure activations.
– An activation record is pushed onto the control stack as the activation starts.
– That activation record is popped when that activation ends.
• When node n is at the top of the control stack, the stack contains the nodes along thepath
from n to the root.
Variable Scopes
• The same variable name can be used in the different parts of the program.
• The scope rules of the language determine which declaration of a name applies when the
name appears in the program.
• An occurrence of a variable (a name) is:
– local: If that occurrence is in the same procedure in which that name isdeclared.
– non-local: Otherwise (ie. it is declared outside of that procedure) Example:
procedure p;
var b:real;
procedure p;
var a: integer; a is local
begin a := 1; b := 2; end; b is non-local
begin ... end;

Storage
Organization
Activation Records
• Information needed by a single execution of a procedure is managed using a contiguous
block of storage called activation record.
• An activation record is allocated when a procedure is entered, and it is de-allocated when
that procedure exited.
• Size of each field can be determined at compile time (Although actual location of the
activation record is determined at run-time).
– Except that if the procedure has a local variable and its size depends ona
parameter, its size is determined at the run time.
The returned value of the called procedure
is returned
in this field to the calling procedure. In
practice, we may use a machine register
for the return value.
The field for actual parameters is
used by the calling procedure to supply
parameters to the called procedure.
The optional control link points to the
activation record of the caller.
The optional access link is used to refer to
nonlocal data held in other activation records.
The field for saved machine status
holds information about the state of the
machine before the procedure is called.
The field of local data holds data that local
to an execution of a procedure..
Temporay variables is stored in the field of
temporaries.
return value
actual parameters
optional control link
optional control link
optional access link
saved machine status
local data
temporaries

Example:
(For a recursive procedure)
program main; procedure p; function
q(a:integer):integer;
begin
if (a=1) then q:=1; else q:=a+q(a-1);
end;
begin q(3); end;
begin p; end;
stack
main
p
a: 3
q(3)
a:2
q(2)
a:1
q(1)

Creation of Activation Records
• Who allocates an activation record of a procedure?
– Some part of the activation record of a procedure is created by that
procedure immediately after that procedure is entered.
– Some part is created by the caller of that procedure before that procedure
is entered.
• Who deallocates?
– Callee de-allocates the part allocated by Callee.
– Caller de-allocates the part allocated by Caller.
Displays
• An array of pointers to activation records can be used to access activation records.
• This array is called as displays.
• For each level, there will be an array entry.
Current activation record at level 1
1:
2:
3:

ERROR DETECTION AND RECOVERY
• What should the parser do in an error case?
– The parser should be able to give an error message (as much as possible meaningful
error message).
– It should recover from that error case, and it should be able to continue the parsing with
the rest of the input.
Error Recovery Techniques
• Panic-Mode Error Recovery
– Skipping the input symbols until a synchronizing token is found.
• Phrase-Level Error Recovery
– Each empty entry in the parsing table is filled with a pointer to a specific error routineto
take care that error case.
• Error-Productions
– If we have a good idea of the common errors that might be encountered, we can
augment
the grammar with productions that generate erroneous constructs.
– When an error production is used by the parser, we can generate appropriate error
diagnostics.
– Since it is almost impossible to know all the errors that can be made by the
programmers, this method is not practical.
• Global-Correction
– Ideally, we would like a compiler to make as few change as possible inprocessing
incorrect inputs.
– We have to globally analyze the input to find the error.
– This is an expensive method, and it is not in practice.

Error Recovery in Predictive Parsing
• An error may occur in the predictive parsing (LL(1)parsing)
– if the terminal symbol on the top of stack does not match with the current input symbol.
– if the top of stack is a non-terminal A, the current input symbol is a, and the parsing table
entry M[A,a] is empty.
Panic-Mode Error Recovery in LL(1) Parsing
• In panic-mode error recovery, we skip all the input symbols until a synchronizing token isfound.
• What is the synchronizing token?
– All the terminal-symbols in the follow set of a non-terminal can be used as a
synchronizing
token set for that non-terminal.
• So, a simple panic-mode error recovery for the LL(1) parsing:
– All the empty entries are marked as synch to indicate that the parser will skip all the input
symbols until a symbol in the follow set of the non-terminal A which on the top of the stack. Then
the parser will pop that non-terminal A from the stack. The parsing continues from thatstate.
– To handle unmatched terminal symbols, the parser pops that unmatched terminal symbol
from the stack and it issues an error message saying that that unmatched terminal isinserted.
Example:
Phrase-Level Error Recovery
• Each empty entry in the parsing table is filled with a pointer to a special error routine which will

take care that error case.
• These error routines may:
– change, insert, or delete input symbols.
– issue appropriate error messages
– pop items from the stack.
• We should be careful when we design these error routines, because we may put the parser into
an infinite loop.
Error Recovery in Operator-Precedence Parsing
Error Cases:
– No relation holds between the terminal on the top of stack and the next input symbol.
– A handle is found (reduction step), but there is no production with this handle as a right
side
Error Recovery:
– Each empty entry is filled with a pointer to an error routine.
– Decides the popped handle “looks like” which right hand side. And tries to recover from
that situation.
Error Recovery in LR Parsing
• An LR parser will detect an error when it consults the parsing action table and findsan
error entry. All empty entries in the action table are error entries.
• Errors are never detected by consulting the goto table.
• An LR parser will announce error as soon as there is no valid continuation for thescanned
portion of the input.
• A canonical LR parser (LR(1) parser) will never make even a single reduction before
announcing an error.
• The SLR and LALR parsers may make several reductions before announcing anerror.
• But, all LR parsers (LR(1), LALR and SLR parsers) will never shift an erroneousinput
symbol onto the stack.
Panic Mode Error Recovery in LR Parsing
• Scan down the stack until a state s with a goto on a particular nonterminal A is found. (Get
rid of everything from the stack before this state s).
• Discard zero or more input symbols until a symbol a is found that can legitimatelyfollow
A.
– The symbol a is simply in FOLLOW (A), but this may not work for all situations.
• The parser stacks the nonterminal A and the state goto[s,A], and it resumes the normal
parsing.
• This nonterminal A is normally is a basic programming block (there can be more than one
choice for A).
– stmt, expr, block, ...

Phrase-Level Error Recovery in LR Parsing
• Each empty entry in the action table is marked with a specific error routine.
• An error routine reflects the error that the user most likely will make in that case.
• An error routine inserts the symbols into the stack or the input (or it deletes the symbols
from the stack and the input, or it can do both insertion and deletion).
– missing operand
– unbalanced right parenthesis

CODE OPTIMIZATION
• Code optimization is aimed at obtaining a more efficient code.
• Two constraints on the technique used to perform optimizations
oThey must ensure that the transformed program is semantically equivalent to the
original program.
oThe improvement of the program efficiency must be achieved without changing
the algorithms which are used in the program.
• Optimization may be classified as Machine dependent and Machine independent.
o Machine dependent optimizations exploit characteristics of the target machine.
o Machine independent optimizations are based on mathematical properties of a
sequence of source statements.
Optimizing Transformations
Common Sub-expression Elimination
• An expression need not be evaluated if it was previously computed and values of
variables in this expression have not changed since the earlier computations.
Example:
a = d * c;
.
.
.
d = b * c + x –y;
We can eliminate the second evaluation of b*c from this code if none of the intervening statements
has changed its value. The code can be rewritten as given below.
T1 = b * c;
a = T1;
.
.
.
d = T1 + x – y;
Compile Time Evaluation
• We can improve the execution efficiency of a program byshifting execution time actions to
compile time.
• We can evaluate an expression by a single value (known as folding).
Example:
A = 2 * (22.0/7.0) * r

Here we can perform the computation 2 * (22.0/7.0) at compile time itself.
• If a variable is assigned a constant value and is used in an expression without being
assigned other value to it, we can evaluate some portion of the expression using the constant value
(known as Constant Propagation).
Example:
x = 12.4
.
.
y = x / 2.3
Here we evaluate x / 2.3 as 12.4 / 2.3 at compile time.
Variable Propagation
• If a variable is assigned to another variable, we use one in place of another.
• This will be useful to carry out other optimization that were otherwise not possible.
Example:
c = a * b; x = a;
.
.
.
d = x * b;
Here, if we replace x by a then a * b and x * b will be identified as common sub- expressions.
Dead Code Elimination
•If the value contained in a variable at that point is not used anywhere in the program subsequently,
the variable is said to be dead at that place.
•If an assignment is made to a dead variable, then that assignment is a dead assignment and it can
be safely removed from the program.
•A piece of code is said to be dead if it computes values that are never used anywherein
the program.
• Dead Code can be eliminated safely.
• Variable propagation often leads to making assignment statement into dead code.
Example:
c = a * b;
x = a;
.

.
.
d = x * b + 4;
Variable propagation will lead to following changes. c = a * b;
x = a;
.
.
.
d = a * b + 4;
This assignment x = a is now useless and can be removed
c = a * b;
.
.
.
d = a * b + 4;
Code Motion
•We aim to improve the execution time of the program by reducing the evaluation frequencyof
expressions.
•Evaluation of expressions is moved from one part of the program to another in such a way that itis
evaluated lesser frequently.
•Loops are usually executed several times.
•We can bring the loop-invariant statements out of the loop.
Example:
a = 200;
while (a > 0)
{
b = x + y;
if ( a%b == 0)
printf (“%d”, a);
}
The statement b = x + y is executed every time with the loop. But because it is loop- invariant, we
can bring it outside the loop. It will then be executed only once.
a = 200;
b = x + y;
while (a > 0)
{
}
if ( a%b == 0)
printf (“%d”, a);
Induction Variables and Strength Reduction

•An induction variable may be defined as an integer scalar variable which is used in loop forthe
following kind of assignments i = i + constant.
•Strength Reduction means replacing the high strength operator by a low strength operator.
•Strength Reduction used on induction variables to achieve a more efficient code.
Example:
i = 1;
while (i < 10)
{
.
.
.
y = i * 4;
.
.
}
This code can be replaced by the following code. i = 1;
t = 4;
while (t < 40)
{
.
.
.
y = t;
.
.
.
t = t + 4;
.
.
.
}
Use of Algebraic Identities
•Certain computations that look different to the compiler and are not identified as common sub-
expressions are actually same.
•An expression B op C will usually be treated as being different to C op B.
•However, for certain operations (like addition and multiplication), they will produce the sameresult.
•We can achieve further optimization by treating them as common sub-expressions for such
operations.

Local Optimizations
•Target code generated statement by statement generally contains redundant instructions.
•We can improve the quality of such code by applying optimizing transformations locally by
examining a short sequence of code instructions and replacing them by faster or shorter sequence,
if possible.
•This technique is known as Peephole Optimization where the peephole is a smallmoving
window on the program.
• Many of the code optimization techniques can be carried out by a single portion of a
program known as Basic Block.
Basic Block
•A basic Block is defined as a sequence of consecutive statements with only one entry (at the
beginning) and one exit (at the end).
•When a Basic Block of a program is entered, all the statements are executed in sequence without
a halt or possibility of branch except at the end.
•In order to determine all the Basic Block in a program, we need to identify the leaders,
the first statement of each Basic Block.
• Any statement that satisfies the following conditions is a leader;
o The first statement is leader.
o Any statement which is the target of any goto (jump) is a leader.
 Any statement that immediately follows a goto (jump) is a leader.
 A basic block is defined as the portion of code from one leader to the statement up tobut
including the next leader or the end of the program.
Flow Graph
• It is a directed graph that is used to portray basic block and their successor relationships.
• The nodes of a flow graph are the basic blocks.
• The basic block whose leader is the first statement is known as the initial block.
• There is a directed edge from block B1 to B2 if B2 could immediately follow B1 during
execution.
• To determine whether there should be directed edge from B1 to B2, following criteriais
applied:
o There is a jump from last statement of B1 to the first statement of B2, OR
o B2 immediately follows B1 in order of the program and B1 does not end in an
unconditional jump.
• B1 is known as the predecessor of B2 and B2 is a successor of B1.
Loops
• We need to identify all the loops in a flow graph to carry out many optimizations discussed
earlier.
• A loop is a collection of nodes that
o is strongly connected i.e. from any node in the loop to any other, there is a
path of length one or more wholly within the loop, and
o has a unique entry, a node in the loop such that the only way to reach a
node in the loop from a node outside the loop is to first go through the entry.

DAG Representation of a Basic Block
• Many optimizing transformations can be implemented using the DAG representation of a basic
block.
• DAG stands for Directed Acyclic Graph i.e. a graph with directed edges and no cycles.
• DAG is very much like a tree but differs in that it may contain shared nodes where sharednodes
indicate common sub-expressions.
• A DAG has following components;
o Leaves are labeled by unique identifiers, either variable names or constants.
o Interior nodes are labeled by an operator symbol.
o Nodes are optionally given an extra set of identifiers known asattached
identifiers.
DAG Construction
• We assume there are initially no nodes and NODE ( ) is undefined for all arguments.
• The 3-address statements has one of three cases:
(i) A = B op C
(ii) A = op B
(iii) A = B
• We shall do the following steps (1) through (3) for each 3-address statement of the basic block:
(1) If NODE (B) is undefined, create a leaf labeled B, and let NODE (B) be this node. In case
(i), if NODE (C) is undefined, create a leaf labeled C and let that leaf be NODE (C); (2) In case (i), determine if
there is a node labeled op whose left child is NODE (B) and
whose right child is NODE (C). (This is to catch common sub-expressions.) If not create such a node. In case
(ii), determine whether there is a node labeled op whose lone child is NODE (B). If not create such a node.
Let n be the node found or created in both cases. In case (iii), let n be NODE (B).
(3) Append A to the list of attached identifiers for the node n in (2). Delete A from the list of attached
identifiers for NODE (A). Finally, set NODE (A) to n.
Applications of DAG
• We automatically detect common sub-expressions while constructing DAG.
• It is also known as to which identifiers have there values used in side the block; they areexactly
those for which a leaf is created in Step (1).
• Wecan also determine which statements compute values which could be used outside theblock;
they are exactly those statements S whose node n in step (2) still hasNODE
(A) = n at the end of DAG construction, where A is the identifier assigned by statement S
i. e. A is still an attached identifier for n.
Global Data Flow Analysis
• Certain optimizations can be achieved by examining the entire program and not just a portion of the
program.
• User-defined chaining is one particular problem of this kind.
• Here we try to find out as to which definition of a variable is applicable in a statement usingthe
value of that variable.

Compiler design

More Related Content

What's hot (20)

Similar to Compiler design (20)

Recently uploaded (20)

Compiler design