COMPUTER_ORGANIZATION.ppt

COMPUTER ORGANIZATION
AND ARCHITECTURE

INTRODUCTION
 Just as buildings, each computer has a visible
structure, referred to as its architecture.
 In computer science and engineering computer
architecture is the practical art of selecting and
interconnecting hardware components to create
computers that meet functional, performance and
cost goals and the formal modeling of those
systems.
 The functional blocks in a computer are of four
types:
1. Central Processing Unit
2. Memory
3. Input Unit
4. Output Unit

DATA FLOW BETWEEN CPU, MEMORY AND I/O
DEVICES
Auxilliary Storage
(Backing Storage)
To Supplement main storage
Memory
Input
Unit
Control Unit ALU
Output
Unit
Registers
Processor
Data Path
Control Signals

CENTRAL PROCESSING UNIT (CPU)
 The CPU or the microprocessor (or simply
processor) is referred as the brain of a computer
system.
 CPU consists of three main subsystems, the
Control Unit (CU), the Arithmetic Logic Unit (ALU),
and the Registers.
 Speed of the computer system is defined by the
architecture of the processor being used.

CENTRAL PROCESSING UNIT (CPU)
(CONDT…)

ARITHMETIC LOGIC UNIT
 The ALU contains electronic circuits necessary to
perform arithmetic and logical operations.
 The arithmetic operations are ADD, SUBSTRACT,
MULTIPLY, DIVIDE, etc.
 The logical operations include COMPARE, SHIFT,
ROTATE, AND, OR, etc
 The control unit analyses each instruction in the
program and sends the relevant signals to all other
units – ALU, Memory, Input unit and Output unit

COMMUNICATION INSIDE A COMPUTER..
 A computer program consists of both instructions
and data. The program is fed into the computer
through the input unit and stored in the memory.
 In order to execute the program, the instructions
have to be fetched from memory one by one.
 This fetching of instructions is done by the control
unit.
 After an instruction is fetched, the control unit
decodes the instruction.
 According to the instruction, the control unit issues
control signals to other units.

COMMUNICATION INSIDE A COMPUTER..
o After an instruction is executed, the result of the
instruction is stored in memory or stored
temporarily in the control unit or ALU, so that this
can be used by the next instruction.
o The results of a program are taken out of the
computer through the output unit.
o The control unit, ALU and registers are collectively
known as Central Processing Unit (CPU)

COMMUNICATION INSIDE A COMPUTER

INTERCONNECTION OF UNITS
 A computer program consists of both instructions
and data.
 The program is fed into the computer through the
input unit and stored in the memory.
 In order to execute the program, the instructions
have to be fetched from memory one by one and
store it into registers (working memory) for
processing.
 This fetching of instructions is done by the control
unit.

INSTRUCTION CYCLE
 Instruction are fetched and executed by the control
unit one by one. The sequences involved for the
fetch of one instruction and its execution are known
as instruction cycle.

INTERCONNECTIONS OF UNITS..
 Set of wires used for interconnection is known as
system bus which carry group of bits (information)
in a controlled manner.
 It is further divided into three logical units, namely
the address bus, the data bus, and the control bus.

SYSTEM BUSES TYPES
 Data Bus: The data bus is used when any unit is
sending data, instruction or command code to some
other units.
 Address Bus: The address bus is used when one
unit is sending an address information i.e. location
of the data residing in the memory to another unit.

CONTROL BUS
 Control Bus: The control bus is responsible for
making CPU, memory and I/O devices work
together as a functional system, carrying signals
that report the status (ready, not ready) of various
units.
 The function of a control bus is to determine and
instruct according to the operation type (Read or
Write). For example, if the processor or an I/O
device wants to read or write a value from memory,
the control bus will specify it.

PROCESSING OF INFORMATION
 The bus is common to all the units in the computer.
Before sending some information on the bus, an
unit should verify whether the bus is free or
occupied with some communication started by
some other unit.
 CPU is the bus master in a computer which decides
who should control the bus when more than one
unit wants the bus at the same time.
 An unit who needs the bus makes a request to the
CPU and waits sanction. Till the CPU issues
sanction, the requesting unit does not attempt to
use the bus.

INTERCONNECTION OF COMPUTERS UNITS VIA
SYSTEM BUS
CPU
Input and
Output(I/O)
Units
Memory
Unit
Data Bus
Address Bus
Control Bus
System
Bus

BUS
 Shows how the system
bus interconnects the
processor, memory and
I/O devices.
 Both processor and
memory units hold a bi-
directional relationship
with the control and
data bus.

BUS
 In case of an address
bus, the communication
with processor and
memory is
unidirectional.
 Processor provides
location of data (stored
in the register) to be
fetched from the
memory to the address
bus and the data carries
the required data to the
processor.

INTERCONNECTION OF COMPUTER UNITS VIA
BUS
 I/O devices have a bi-
directional relationship
with the system bus.

REGISTERS
 It is a special temporary storage location within the CPU.
 Registers quickly accept, store and transfer data and
instructions that are being used immediately.
 To execute an instruction, the control unit of the CPU retrieves
it from main memory and places it onto a register.
 The typical operations that take place in the processing of
instruction are part of the instruction cycle or execution cycle.
 The instruction cycle refers to the retrieval of the instruction
from main memory and its sub sequence at decoding.
 The time it takes to go through the instruction cycle is referred
to as I-time.

ARITHMETIC LOGIC UNIT (ALU)
 ALU performs all the arithmetic and logical
functions.
 It performs arithmetic as well as logical functions.
 The speed of the computer system is defined by the
architecture of the processor being used.

CONTROL UNIT
 It is responsible for directing and coordinating most
of the computer system activities.
 It does not execute instructions by itself. It tells
other parts of the computer system what to do.
 It determines the movement of electronic signals
between the main memory and arithmetic logic unit
as well as the control signals between the CPU and
input/output devices.

CONTROL UNIT(CONDT…)
 To complete an event i.e. processing, control unit
repeats a set of four basic operations:
 Fetching is the process of obtaining a program
instruction or data item from the memory
 Decoding is the process of translating the
instruction into commands the computer can
execute.
 Executing is the process of carrying out the
commands.
 Storing is the process of writing the result to
memory.

 The internal communication inside a computer that
transforms raw data into useful information is called
processing.
 To perform this transformation, the computer uses two
components- processor and memory
 The program is fed into the computer through the input
unit and stored in the memory
 To execute the program, the instructions have to be
fetched from memory one by one which is done by
control unit
 Then the control unit decodes the instruction.

 According to instruction, control unit issues signals
to other units.
 After instruction is executed, the result of the
instruction is stored in memory or stored
temporarily in the registry, so that this can be used
by the next instruction.
 The results of a program are taken out of the
computer through the output unit.

MEMORY
 Memory is the computer's electronic scratchpad or
local store in computer terminology.
 Used for temporary storage of calculations, data,
and other work in progress.
 Two types: Primary and Secondary
 Primary memory or the main memory is part of the
main computer system. The primary memory itself
is of two types.
 The first is called random access memory (RAM)
and the other is read only memory (ROM).

RANDOM ACCESS MEMORY (RAM)
 The processor directly stores and retrieves
information from it.
 Memory is organized into locations. Each memory
location is identified by a unique address. The
access time is same for all location.
 It is volatile: when turned off, everything in RAM
disappears.
 Two types:

TYPES OF RAM
 Dynamic Random Access Memory (DRAM):
This type RAM retain the content of any location
only for a few milliseconds. Within that period,
each location must be written again with the same
contents. This is known as refreshing.
 Static Random Access Memory (SRAM):
This type of RAM preserves the contents of all the
locations as long as the power supply is present.
SRAM is generally included in a computer system
by the name of cache.

READ ONLY MEMORY (ROM)
 Data stored in ROM cannot be modified, or can be
modified only slowly or with difficulty, so it is mainly
used to distribute.
 The instructions in ROM are built into the electronic
circuits of the chip which is called firmware.
 Random access in nature and non-volatile.

TYPES OF ROM
 Programmable read-only memory (PROM), or one-time
programmable ROM can be written to or programmed
via a special device called a PROM programmer.
 Erasable programmable read-only memory (EPROM)
can be erased by exposure to strong ultraviolet light
then rewritten with a process that again needs higher
than usual voltage applied.
 Electrically erasable programmable read-only memory
(EEPROM) is based on a similar semiconductor
structure to EPROM, but allows its entire contents (or
selected banks) to be electrically erased, then rewritten
electrically, so that they need not be removed from the
computer

FLASH MEMORY
 Modern type of EEPROM invented in 1984.
 Random access memories and are non-volatile.
 Use one transistor per memory cell and come in
capacities ranging from 1 MB to 32 GB by the year
2007.
 The read time is much smaller (tens of
nanoseconds) compared write time (tens of
microseconds).

VARIETIES OF SEMICONDUCTOR RANDOM
ACCESS MEMORIES
Main memory of
computers
Read Only Memory
(ROM)
Read/Write
memory Factory
Programmed
User
Programmable
PROM
Erasable PROM
SRAM DRAM
Permanent
non-erasable (Non-erasable)
UVEPROM EEPROM

CACHE MEMORY
 High speed memory kept in between processor and
RAM to increase the data execution speed.
 Kept near to the processor.
 Major reason for incorporating cache in the system
is that the CPU is much faster than the DRAM and
needs a place to store information that can be
accessed quickly.
 Cache fetches the frequently used data from the
DRAM and buffers (stores) it for further processor
usage.

DIFFERENT LEVELS OF CACHE
 L1-cache is the fastest cache and it usually comes
within the processor chip itself. L1 cache typically
ranges in size from 8KB to 64KB and uses the high-
speed SRAM instead of the slower and cheaper
DRAM used for main memory.
 L2 cache comes between L1 and RAM and is
bigger than the primary cache.
 L3 cache is not found nowadays as its function is
replaced by L2 cache. L3 caches are found on the
motherboard rather than the processor. It is kept
between RAM and L2 cache.

PROCESSOR SPEED
 Speed of a computer system is determined by
several factors, clock speed of the processor and
the speed and size of the data bus.
 Clock speed is the rate at which the processor
processes information and this is measured in
millions of cycles per second(Megahertz)
 The more the number of hertz, the faster is the
processing speed
 The larger the bus width and the faster the bus
speed, the greater the amount of data can travel on
it in a given amount of time.

INPUT DEVICES
 Any peripheral used to provide data and control
signals to an information processing system such
as a computer or other information appliance.
 Common input devices: Keyboard, Mouse
 Other devices: microphone, digital camera,
scanner.

OUTPUT DEVICES
 Any piece of computer hardware equipment used to
communicate the results of processed data to the
user.
 Examples: Monitors, Printers, Speakers, etc.

LET US SUMMARISE..
 Computer organization and architecture is defined
as the science of selecting and interconnecting
hardware components to create computers that
meet functional, performance and cost goals.
 The central processing unit is the brain of the
computer system where all the computing is done.
It consists of three main components, the control
unit (CU), the arithmetic logic unit (ALU) and the
registers.
 The control unit controls the Input/Output devices
and transfer of data to and from the primary
storage.

ANSWER IN BRIEF
 Write a note on computer architecture
 What is a system bus? Name the various units of
the system bus.
 What is the significance of main memory in proper
functioning of a processor.
 What is an Instruction cycle?

ANSWER IN DETAIL
 What do you understand by Central Processing
Unit? Describe in details various units of the CPU.
 Write a detailed note on Instruction Cycle
describing the various steps involved.
 Describe in details:
 a. Processor to Memory Communication
 b. Processor to I/O Devices Communication

LET US SUMMARISE..
 The Arithmetic Unit is responsible for carrying out
the arithmetic calculations such as addition,
subtraction, multiplication, and division.
 The Logic Unit provides CPU the ability to make
logical operations like comparing two data items
and taking different actions based on the results of
the comparison.
 Registers are special purpose, high-speed
temporary memory units used by the processor for
holding data.

LET US SUMMARISE..
 The System bus is a set of wires used for
interconnection of different units of a computer
system. The three logical units of a system bus are
the address bus, the data bus, and the control bus.
 A cache is a piece of very fast memory, made from
high-speed static RAM that reduces the access
time of the data. It is very expensive and generally
incorporated in the processor, where valuable data
and program segments are kept.

LET US SUMMARISE..
 Instructions comprise two parts, namely, the op-code
and the operand. They are transferred one at a time
into the processor, where they are decoded and the
executed.
 The Instruction Cycle details the sequence of events
that takes place as an instruction is read from
memory and executed.
 In a Fetch Cycle, instruction to be executed is
fetched from the memory to the processor.
 The Decode Cycle is responsible for recognizing
which operation the instruction represents activating
the correct circuitry to perform that operation.

LET US SUMMARISE..
 During the Execute Cycle, the operation specified
by the op-code is performed on user provided data
in the ALU.
 In the Store Cycle, the results from the execution
cycle are stored back to the memory.
 Processors are built with the ability to execute a
limited set of basic operations called the Instruction
Set.
 The speed of the processor is measured in millions
of cycles per second or Megahertz (MHz).

LET US SUMMARISE..
 Two notables factors on which the speed of a
processor depends are the clock speed of the
processor and the speed and the size of the data
bus

COMPUTER_ORGANIZATION.ppt

More Related Content

Similar to COMPUTER_ORGANIZATION.ppt (20)

Recently uploaded (20)

COMPUTER_ORGANIZATION.ppt

Editor's Notes