Coplaner concurrent force system
6 likes1,352 views
This document is a presentation on mechanics of solids that was prepared by four students and guided by Heena Mam of the civil department. It covers fundamental principles of mechanics including the principle of physical independence of forces, principle of transmissibility, principle of superposition, and resultant forces. Methods for composition of forces such as the parallelogram law, resolution of forces, triangle law, and polygon law are discussed. Lami's theorem is also introduced.
Coplaner concurrent force system
- 1. Mechanics of SOLIDS (2130003) B.E. MECH – Sem III rd Prepared by, (1) PATEL SHREY B (170953119031) DD 42 (2) RATHVAYOGESH (170953119036) DD 39 (3) RATHOD DIVYESH (170953119035) DD 50 (4) SINORA SIDDHRAJ (170953119047) DD 28 Guided by, HEENA MAM (CIVIL DEPTT.) 1$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 2. • Introduction • Fundamental Principle Of Mechanics o Principle of physical independence of forces o Principle of transmissibility o Principle of superposition o Resultant Forces • Composition of Forces Methods • Parallelogram Law Of Forces • Resolution Of The Forces • Triangle Law Of Forces • PolygonLawOf Forces • Lami’s Theorem 2$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 3. ▪ An agent which produces or tends to produce, destroys or tends to destroy motion of body is called as force. ▪ SI UNIT = Newton 1 N Force :- A force which can produce an acceleration of 1 m/sec2 in mass of 1 kg is called 1 N force. 1 kgf Force :- A force which can produce an acceleration of g m/sec2 in mass of 1 kg is called 1 kgf force. 3$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 4. ▪ Forces whose line of action lie on the same plane, are known as coplanar forces. 4$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 5. ▪ The forces which meet at one point, are known as concurrent forces. 5$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 6. ▪Principle of physical independence of forces ▪Principle of transmissibility ▪Principle of superposition ▪Resultant Forces 6$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 7. ▪ If number of forces are acting simultaneously on particle, then the resultant of these force will have the same effect as produced by all forces . ▪ If a force act at any point on rigid body it may also be considered to act any other point on its line of action, provided the point is rigidly connected the body. 7$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 8. ▪ If two equal and opposite collinear forces are added or removed from the system of forces, there will be no change in the system & position of body. 8$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 9. ▪ Spliting of forces into their component unit is called resolution of forces. ▪ This is the reverse process which consist of expressing a single force in terms of their components. 9$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 10. 10$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 11. ▪ If the two forces acting at a point, are represented in magnitude and direction by the two sides of the parallelogram drawn from one of its angular points, their magnitude and direction by the diagonal of the parallelogram passing through that angular point. Parallelogram Law Of Forces 11$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 12. • The process of the splitting up the given force in two or more component, in the particular direction, without changing the effect on the body is called resolution of a force. • Generally a given forces is split up in two manually perpendicular force components, Horizontal Components(X-Components) Vertical Components(Y-Components) Resolution Of The Forces 12$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 13. Triangle Law Of Forces • If the force acting on the body, it can be represented by the two adjacent sides of triangle with magnitude and directions and the resultant can be given by other side of triangle, which is the statement of the law of the triangle. • Assumed that the, we have the pair of the forces acting on the point than triangle law of the forces can be applied as, 13$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 14. ▪ If a number of forces acting at a point be represented in magnitude and direction by the sides of polygon taken in order, then the resultant of all these forces may be represented in magnitude and direction by closing side of polygon taken in opposite order. 14$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 15. • If the three coplanar forces acting at a point be in a equilibrium, then each force proportional to the sine of the angle between other two sides. • Applying Lami’s Theorm on given figure as shown below :- 15$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#
- 16. 16$ɧⱤɘλ’ƶ P@TeL @ pshrey_98 #insta#