Crt notes

Sarfaraz husain
 MAULANA AZAD NATIONAL URDU UNIVERSITY
 Mobile no =+91- 818481318
 www.facebook .com/pasha.don143
 MCA 2nd
year student
 sarfarazbilari@yahoo.com

Displays
 Emissive display -- convert electrical energy into light
- Cathode ray tube (CRT)
- Flat panel CRT
- Plasma panels (gas-discharge display)
- Thin-film electroluminescent (EL) display
- Light-emitting diodes
 Non-Emissive display -- optical effect: convert sunlight or
light from other source into graphic patterns.
- Liquid-crystal device (LCD) – flat panel
- Passive-matrix LCD
- Active-matrix LCD

Monochrome Cathode Ray Tube
(CRT)
 Cathode Ray – beam of electrons
- emitted by an electron gun
- accelerated by a high positive voltage near the face of the tube
- forced into a narrow stream by a focusing system
- directed toward a point on the screen by the magnetic field generated
by the deflection coils
- hit onto the the phosphor-coated screen
- phosphor emits visible light, whose intensity depends on the number of
electrons striking on the screen
Cathode
Focusing
system
Horizontal
& vertical
deflection
Electron gun

Properties of the CRT
 Phosphor Persistence (PP)
- the light output decays exponentially with time.
- a phosphor’s persistence is defined as the time from the removal of
excitation to the moment of decaying the light to one-tenth of its
original intensity
- low persistence -> good for animation
- high persistence -> good for static picture with high complexity
- typical range: 10ms – 60ms
 Refresh rate (RR)
- number of times per second the image is redrawn (e.g., 60 or higher)
 Critical fusion frequency (CFF)
- the refresh rate above which a picture stops flickering and becomes
steady
 longer PP -> lower CFF required

 Resolution
- the maximum number of points that can be displayed without overlap on
a CRT
- high-definition system, e.g. 1280 * 1024 pixels
- resolution depends on the type of phosphor, the intensity to be
displayed, focusing and deflection systems, size of video memory
 Horizontal scan rate
- the number of scan lines per second that the CRT is able to display
- refresh rate * number of scan lines per frame

CRT Color
Monitor
Electron Guns
Red Input
Green
Input
Blue Input
Deflection
Yoke
Shadow Mask
Red, Blue,
and Green
Phosphor Dots
CRT

Shadow
Mask
SHADOW MASK
Red
Green
Blue
Convergence
Point
Phosphor Dot
Screen
•Shadow mask has one small hole for each phosphor triad.
•Holes are precisely aligned with respect to both the triads and the
electron guns, so that each dot is exposed to electrons from only
one gun.
•The number of electrons in each beam controls the amount of red,
blue and green light generated by the triad.

 Dot Pitch –the spacing between pixels on
a CRT, measured in millimeters.
Generally, the lower the number, the more
detailed the image.

Output Scan Technology
 Vector display
- line drawing and stroke drawing in a random order
 Raster display
- horizontal scan line order

Vector Display
 Vector display (1960s)
- vector system consists of:
display processor (controller),
display buffer memory
CRT
- The buffer stores the computer-produced display list or display program
- Display program contains point- and point-plotting commands with (x, y, z)
endpoint coordinates
- The commands for plotting are interpreted by the display processor
- The principle of vector system is random scan
The beam is deflected from endpoint to endpoint, as dictated by the order of the
display command
- display list needed to be refreshed (e.g., 30Hz)

Vector Display
 Vector display (1960s)
:
:
Move
10
15
LINE
300
400
CHAR
Lu
cy
LINE
:
:
JMP
Display Controller (DC)
Monitor
Lucy
Host Computer
display buffer

Raster Display
 Raster display (since 1970s)
- Raster system consists of:
display processor (input, refreshing, scan converting)
video controller
buffer memory (frame buffer)
CRT
- The buffer stores the primitive pixels, rather than display list or display program
- Video controller reads the pixel contents to produce the actual image on the
screen
- The image is represented as a set of raster scan lines, and forms a matrix of pixels.
- need refresh the raster display (e.g., 60Hz)

Common Raster Display System
CPUCPU
System
Memory
System
Memory
Peripheral
Devices
Peripheral
Devices
Frame
Buffer
Frame
Buffer
Display
System bus
Display
Processor
Memory
Display Processor
Video
Controller

Raster Display
 Raster display
Display Processor
Monitor
Lucy
Host Computer
Frame buffer
Video Controller
Lucy

BASIC
DEFINITIONS
RASTER: A rectangular array of points or dots.
PIXEL (Pel): One dot or picture element of the raster
SCAN LINE: A row of pixels
Video raster devices
display an image by
sequentially drawing
out the pixels of the
scan lines that form
the raster.

Raster Display
 Raster scan with blanked retrace
Scan line
Vertical retrace
Horizontal retrace

Scanning An
Image
Frame: The image to be scanned out on the CRT.
•Some minimum number of frames must be redisplayed (or refreshed)
each second to eliminate flicker in the image.
•Critical Fusion Frequency --The
refresh rate above which a picture
stops flickering and fuses into a
steady image is called the critical
fusion frequency.
• Typically 60 times per second for
raster displays.
•Varies with intensity, individuals,
phosphor persistence, room lighting.

Video Controller
 Access the frame buffer to refresh the screen
 Control the operation for display
 Color look-up table
Linear
address
X
address
Y
address
Raster-scan
generator
Frame
buffer
Pixel
values
Horizontal
& vertical
Deflection signal
Data Intensity
or color

Video Controller
 Types of refresh
 Interlaced (mostly for TV for reducing flickering effect -- NTSC)
- two fields for one frame
- odd-field: odd-numbered scan lines
- even-field: even-numbered scan lines
- refresh rate: e.g., NTSC: 60Hz (60 fields per second); 30 frame/s.
PAL: 50Hz
 Non-interlaced (mostly for monitor)
- refresh rate: e.g., 60Hz or more
Odd-field
Even-field

Display
ProcessorAlso called either a Graphics Controller or Display CoProcessor
Specialized hardware to assist in scan converting output
primitives into the frame buffer.
Fundamental difference among display systems is how much the
display processor does versus how much must be done by the
graphics subroutine package executing on the general-
purpose CPU.

Frame
Buffer
A frame buffer may be thought of as computer memory organized as a
two-dimensional array with each (x,y) addressable location
corresponding to one pixel.
Bit Planes or Bit Depth is the number of bits corresponding to each
pixel.
A typical frame buffer resolution might be
640 x 480 x 8
1280 x 1024 x 8
1280 x 1024 x 24

1-Bit Memory. Monochrome
Display
(Bit-map Display)
Electron
Gun
1 bit
2 levels

3-Bit Color
Display3
red
green
blue
COLOR: black red green blue yellow cyan magenta white
R
G
B
0
0
0
1
0
0
0
1
0
0
0
1
1
1
0
0
1
1
1
0
1
1
1
1

True Color Display
24 bitplanes, 8 bits per color gun.
224
= 16,777,216 colors
Green
Red
Blue
8
8
8

Color Look-up Table
 LUT (Look-Up Table)
 LUT has as many entries as there are pixel values, the values in the bit planes are used as
indices into one or more LUT.
 A pixel value is used not to control the beam directly, but rather as an index into the look-up
table.
 The table entry’s value is used to control the intensity or color of the CRT.
for example:
If each pixel consists of 8 bits in the frame buffer the LUT requires a table with 256 entries.
Pixel value 67  access the content in the entry 67 of the table  use the color
content to control the CRT beam
 The total number of bits in each table entry is called the width of the LUT,
which is the capability for providing all possible colors
 The look-up operation is done for each pixel on each display cycle, fast access of the table is
required.
 LUT can be loaded on program command.

Color Map Look-Up
TablesExtends the number of colors that can be displayed by a given
number of bit-planes.
Fig. 4.LUT Video look-up table organization. A pixel with value 67
(binary 01000011) is displayed on the screen with the red electron
gun at 9/15 of maximum, green at 10/15, and blue at 1/15. This look-up
table is shown with 12 bits per entry. Up to 24 bits per entry are
common.
0
1
0
0
0
0
1
1
67
100110100001
0
67
255
1001 1010 0001
R G B
RED
GREEN
BLUE
Pixel displayed
at x', y'
Pixel in
bit map
at x', y'
0 x
0
y
x
max
max
y
Frame Buffer Look-up table Display

Pseudo Color: 28
x 24 Color Map LUT
0
1
2
3
254
255
RED GREEN BLUE
256 colors chosen from a
palette of 16,777,216.
Each entry in the color map
LUT can be user defined.
Could be used to define 256 shades of green or
64 shades each of red, blue, green and
white, etc.

Color Look-up Table
 The number of the bit planes in the frame buffer determines the number
of colors displayable on the screen simultaneously
 The width of the LUT determines the number of possible colors that we
can choose from (also called the color palette)
 Example:
8 bit planes  28
or 256 colors can be displayed simultaneously
A LUT width of 12 bits  color palette consists of 212
colors in all

Vector Display vs. Raster Display
 Vector display
 Accurate (high resolution) for line drawings
 Requires display processor (controller) to interpret display commands
 High-cost
 Flickering when the number of primitives in the buffer becomes too large
 Raster display
 Low-cost
 Requires frame buffer
 Fresh rate is independent of complexity of the display contents
 Easy to fill a region
 Line or polygon must be scan-converted into the component pixels in the
frame buffer, which is computationally expensive.
 Less accurate: lines are approximated with pixels on the raster grid.
This visual effect (I.e., jaggies or stair-casing) due to a sampling error is
called “aliasing”

Crt notes

More Related Content

What's hot (19)

Similar to Crt notes (20)

More from Azad public school (13)

Recently uploaded (20)

Crt notes

Editor's Notes