Csac12[1].p

CSAC12 1/13/07 9:25 Page 320

12
Competitive Advantage
in Mature Industries

We are a true “penny profit” business. That means that it takes hard work and
attention to detail to be financially successful – it is far from being a sure thing.
Our store managers must do two things well: control costs and increase sales.
Cost control cannot be done by compromising product quality, customer service,
or restaurant cleanliness, but rather by consistent monitoring of the “vital signs”
of the business through observation, reports, and analysis. Portion control is a
critical part of our business. For example, each Filet-O-Fish sandwich receives 1
fluid ounce of tartar sauce and 0.5 ounces of cheese. Our raw materials are
fabricated to exacting tolerances, and our managers check them on an ongoing
basis. Our written specification for lettuce is over two typewritten pages long.
Our French fries must meet standards for potato type, solid and moisture
content, and distribution of strand lengths.
—EDWARD H. RENSI, PRESIDENT AND CHIEF OPERATING OFFICER,
MCDONALD’S U.S.A. 1

OUTLINE

l Introduction and Objectives Efficiency through Bureaucracy
Beyond Bureaucracy
l Competitive Advantage in Mature
Industries l Strategies for Declining Industries
Cost Advantage Adjusting Capacity to Declining Demand
Segment and Customer Selection The Nature of Demand
The Quest for Differentiation Strategies for Declining Industries
Innovation
l Summary
l Strategy Implementation in Mature
l Self-Study Questions
Industries: Structure, Systems, and
Style l Notes

320

CSAC12 1/13/07 9:25 Page 321

CHAPTER 12 COMPETITIVE ADVANTAGE IN MATURE INDUSTRIES 321

Introduction and Objectives
Although technology-based industries grab the attention of both business journalists and
strategy researchers, if importance is measured by share of GDP rather than share of press
coverage, mature industries – food, energy, construction, vehicles, financial services, and
restaurants – retain their preeminence, even in the advanced industrialized nations.
Despite their heterogeneity – they range from massage parlors to steel – mature
industries present several similarities from a strategic perspective. The purpose of this
chapter is to explore the characteristics of mature industries, the strategies through
which competitive advantage can be established within them, and the implications of
these strategies for structure, systems, and leadership style. As we shall see, maturity does
not imply lack of opportunity. Companies such as Hennes & Mauritz (fashion clothing),
Ryanair (airlines), Starbucks (coffee shops), and Nucor (steel) have prospered on the basis
of innovative strategies. Coca-Cola, Exxon Mobil, and General Electric were founded in
the 19th century, yet, over the past decade, have achieved combinations of profitability
and growth that would make most high-tech companies envious. Nor does maturity mean
lack of innovation: as we shall see, many mature industries have been transformed by
new technologies and new strategies.

By the time you have completed this chapter, you will be able to:

l Recognize the principal strategic characteristics of mature industries.

l Identify key success factors within mature industries and formulate strategies
directed toward their exploitation.

l Locate and analyze opportunities for strategic innovation in mature industries
to establish competitive advantage.

l Design organizational structures and management systems that can effectively
implement such strategies.

Competitive Advantage in Mature Industries
Our analysis of the industry life cycle (Chapter 10) suggests that maturity has two
principal implications for competitive advantage: first, it tends to reduce the number
of opportunities for establishing competitive advantage; second, it shifts these oppor-
tunities from differentiation-based factors to cost-based factors.
Diminishing opportunities for sustainable competitive advantage in mature indus-
tries stem from:

CSAC12 1/13/07 9:25 Page 322

322 PART IV BUSINESS STRATEGIES IN DIFFERENT INDUSTRY CONTEXTS

l Less scope for differentiation advantage resulting from increased buyer
knowledge, product standardization, and less product innovation.
l Diffusion of process technology means that cost advantages based on
superior processes or more advanced capital equipment methods are
difficult to obtain and sustain. Once a cost advantage is established, it is
vulnerable to exchange rate movements and the emergence of low-cost
overseas competitors.
l A highly developed industry infrastructure together with the presence of
powerful distributors makes it easier to attack established firms that occupy
particular strategic niches.
Using different terminology, Warren Buffett – “The Sage of Omaha” – describes the
same process of maturity leading to eroding competitive advantage as enterprises’
transition from “franchises” into “businesses” (see Strategy Capsule 12.1).
This trend toward deteriorating industry profitability is a constant threat in mature
industries. As rivalry encourages overinvestment in capacity, international competition
increases, and differentiation is undermined by commoditization, attaining a com-
petitive advantage becomes essential to achieving positive economic profits.

STRATEGY CAPSULE 12.1

The Transition of “Franchises” into “Business”:
The Media Sector

In assessing the profit prospects of a firm, Buffett identifies this erosion of competitive
Warren Buffett distinguishes “Franchises” from advantage within the media sector – newspapers,
“Businesses”: television, and magazines – “as retailing pat-
terns change and entertainment choices prolif-
An economic franchise arises from a
erate.” The problem is that as the businesses
product or service that (1) is needed or
have transformed from “franchises” into “busi-
desired; (2) is thought by customers to
nesses,” consumers “enjoy greatly broadened
have no close substitute; and (3) is not
choices as to where to find them.” Unfortu-
subject to price regulation. Franchises
nately, demand can’t expand in response to
earn high rates of return on capital . . .
the new supply: “500 million American eye-
[and] can tolerate mismanagement . . .
balls and a 24-hour day are all that’s available.
In contrast, “a business” earns
The result is that competition has intensified,
exceptional profits only if it is a low-cost
markets have fragmented, and the media
operator or if supply of its product or
industry has lost some – though far from all –
service is tight. And a business, unlike a
of its franchise strength.”
franchise, can be killed by poor
management.
Source: Letter to Shareholders, Annual Report of Berkshire
Hathaway Inc., 1991.

CSAC12 1/13/07 9:25 Page 323


Cost Advantage
If cost is the overwhelmingly important key success factor in most mature industries,
what are the primary sources of low cost? Three cost drivers tend to be especially
important:
l Economies of scale. In capital-intensive industries, or where advertising,
distribution, or new product development is an important element of total
cost, economies of scale are important sources of interfirm cost differences.
The increased standardization that accompanies maturity greatly assists the
exploitation of such scale economies. The significance of scale economies in
mature industries is indicated by the fact that the association between ROI
and market share is stronger in mature industries than in emerging industries.2
l Low-cost inputs. Where small competitors are successful in undercutting the
prices of market leaders in mature industries, it is frequently through their
access to low-cost inputs. Established firms can become locked into high
salaries and benefits, inefficient working practices and bloated overheads
inherited from more prosperous times. New entrants into mature industries
may gain cost advantages by acquiring plant and equipment at bargain-
basement levels and by cutting labor costs. Valero Energy Corporation is the
largest oil refiner in the United States: it acquired loss-making refineries from
the majors at below-book prices then operated them with rigorous cost
efficiency. A lower cost of capital can also be a key source of cost advantage.
The acquisition of retailers, hotels, hospital groups, and chemical firms by
private equity funds has been motivated in part by the attractions of
substituting low-cost debt for high-cost equity.3
l Low overheads. During the early 1990s, some of the most profitable
companies in mature industries tended to be those that had achieved the most
substantial reductions in overhead costs. In discount retailing, Wal-Mart is
famous for its parsimonious approach to overhead cost. Among the oil
majors, Exxon is known for its rigorous control of overhead costs. Exxon’s
headquarters cost (relative to net worth) was estimated at less than one-
quarter that of Mobil’s.4 When Exxon merged with Mobil, it was able to
extract huge cost savings from Mobil. In newspaper and magazine publishing,
newcomers such as EMAP in the UK and Media News Group (run by “Lean
Dean” Singleton) have aquired a host of titles then slashed overhead costs.
Because cost inefficiencies tend to become institutionalized within mature enter-
prises, cost reduction may require drastic interventions. Corporate restructuring –
intensive periods of structural and strategic change – typically involves cost reduction
through outsourcing, headcount reduction, and downsizing – especially at corporate
headquarters.5 Successful turnaround strategies typically involve aggressive cost cut-
ting. Among mature US businesses, Hambrick and Schecter identified three success-
ful approaches:
l Asset and cost surgery – aggressive cost reduction through reduction of excess
capacity; halting of new investment in plant and equipment; and cutbacks in
R&D, marketing expenditures, receivables, and inventories.
l Selective product and market pruning – refocusing on segments that were most
profitable or where the firm possessed distinctive strength.

CSAC12 1/13/07 9:25 Page 324


l Piecemeal productivity moves – adjustments to current market position rather
than comprehensive refocusing or reorganizing, including reductions in
marketing and R&D expenditures, higher capacity utilization, and increased
employee productivity.6
Among British Companies, cost reduction was also a key feature of turnaround
strategies. Sharp upturns in performance (“sharpbender”) were typically the result of,
first, changes in top management and, second, intensive efforts to reduce production
costs.7

Segment and Customer Selection
Sluggish demand growth, lack of product differentiation, and international competi-
tion tend to depress the profitability of mature industries. Yet, even unattractive
industries may offer attractive niche markets with strong growth of demand, few
competitors, and abundant potential for differentiation. As a result, segment selec-
tion can be a key determinant of differences in the performance of companies within
the same industry. Wal-Mart’s profitability was boasted by locating its stores in small
and medium-sized towns where it faced little competition. In the auto industry, there
is a constant quest to escape competition by creating new market segments with
“crossover” vehicles that span existing segments. Opportunities for establishing new
segments can arise from the strategies of market leaders. The more that incumbents
focus on the mass market, the more likely it is that new entrants can carve out new
market niches by supplying underserved customer needs.8
The logic of segment focus implies further disaggregation of markets – down to the
level of the individual customer. Information technology permits new approaches to
customer relationship management (CRM), making it possible to analyze individual
characteristics and preferences, identify individual customers’ profit contribution to
the firm, and organize marketing around individualized, integrated approaches to
customers. In the same way that Las Vegas casinos have long recognized that the major
part of their profits derives from a tiny minority of customers – the “high rollers” –
so banks, supermarkets, credit card companies, and hotels increasingly use trans-
actions data to identify their most attractive customers, and those that are a drag on
profitability.
The next stage in this process is to go beyond customer selection to actively target
more attractive customers and transform less valuable customers into more valuable
customers. Alan Grant and Leonard Schlesinger point to the need for companies to
optimize their value exchange – the relationship between the investment a company
makes in a customer relationship and the return that investment generates.9 For example:
l Credit card issuer Capital One has long been a leader in using data
warehousing, experimentation, simulation, and sophisticated statistical
modeling to adjust the terms and features of its credit card offers to the
preferences and characteristics of individual customers. Capital One estimates
the life-time profitability of each customer and analyzes the four key events in
the credit card life cycle: acquiring the customer, stimulating the customer’s
card use, retaining the customer, and managing default.10
l Amazon.com uses information on customers’ prior transactions and
comparisons with other customers making similar purchases to generate
individualized purchase suggestions.

CSAC12 1/13/07 9:25 Page 325


The Quest for Differentiation
Cost leadership, we noted in Chapter 9, is difficult to sustain, particularly in the face
of international competition. Hence, differentiating to attain some insulation from
the rigors of price competition is particularly attractive in mature industries. The prob-
lem is that the trend toward commoditization narrows the scope for differentiation
and reduces customer willingness to pay a premium for differentiation:
l In tires and domestic appliances, companies’ investments in differentiation
through product innovation, quality, and brand advertising reputation have
generated disappointing returns. Vigorous competition, price-sensitive
customers, and strong, aggressive retailers have limited the price premium
that differentiation will support.
l Attempts by airlines to gain competitive advantage through offering more
legroom, providing superior in-flight entertainment, and achieving superior
punctuality have met little market response from consumers. The only
effective differentiators appear to be frequent flier programs and services
offered to first- and business-class travelers.
Standardization of the physical attributes of a product and convergence of con-
sumer preferences constrains, but does not eliminate, opportunities for meaningful
and profitable differentiation. Product standardization is frequently accompanied
by increased differentiation of complementary services – financing terms, leasing
arrangements, warranties, after-sales services, and the like. In consumer goods, maturity
often means a shift from physical differentiation to image differentiation. Entrenched
consumer loyalties to specific brands of cola or cigarettes are a tribute to the capacity
of brand promotion over long periods of time to create distinct images among near-
identical products.
The intensely competitive retail sector produces particularly interesting examples
of differentiation strategies. The dismal profitability earned by many retail chains
(Toys-R-Us, J. C. Penny, and Circuit City in the US; J. Sainsbury, Mothercare, and
Kingfisher in the UK; Royal Ahold in the Netherlands) contrasts sharply with the sales
growth and profitability of stores that have established clear differentiation through
variety, style, and ambiance (Target, Lowe’s, TJX, and Bed, Bath and Beyond in the
US; Zara-Inditex from Spain; Hennes & Mauritz and IKEA from Sweden). A further
lesson from highly competitive mature sectors such as retailing is that competitive
advantage is difficult to sustain. Most of the outstandingly successful retailers of the
previous decade – Toys-R-Us, Body Shop, and Marks & Spencer – have been dis-
placed in the affections of consumers and investors by the rising stars of retail.

Innovation
We have characterized mature industries as industries where the pace of technical
change is low. In many mature industries – steel, textiles, food processing, insurance,
and hotels – R&D expenditure is below 1% of sales revenue, while in US manufac-
turing as a whole just three sectors – computers and electronics, pharmaceuticals, and
aerospace – account for 65% of R&D spending.11 In recent years, this conventional
view of mature industries as lacking technological dynamism has come under attack.
McGahan and Silverman show that, measured by patenting activity, mature industries
are as innovative as emerging industries.12 Certainly in mature products such as tires,

CSAC12 1/13/07 9:25 Page 326


STRATEGY CAPSULE 12.2

Innovation in Mature Industries: Brassiere Technology

The first patent for a “breast-supporting de- polypropylene around a rigid ring – a
vice” was issued in the United States in 1864. design inspired by the Frisbee and
However the first patent relating to an under- engineered by Ove Arup, who also
garment named “brassiere” was issued to Mary engineered London’s Millennium Bridge
Phelps Jacob in 1913. By 1940 over 550 US (which had to be closed because of
patents for brassieres and related breast sup- excessive wobbling).
porters had been issued. l The Ultimo bra, designed by Scottish
The technological quest for a better bra con- model Michelle Mone assisted by a team
tinued into the 21st century – the US Patent of German scientists, is equipped with
Office has issued over 200 patents relating silicone gel pads.
to brassieres since January 2000. The design
l A number of new brassieres use “spacer
innovations of recent years include:
fabric” which comprises “two outer textile
l Wonderbra (owned by Sara Lee) layers separated by a ventilated inner layer
introduced a “variable cleavage” bra of spacer yarns, to allow heat and moisture
equipped with a system of pulleys. to escape. Various properties can be added
l The Airotic bra designed by Gossard to the fabrics, including anti-microbial,
(also owned by Sara Lee) features “twin air anti-mildew, anti-static, flame-retardant,
bags as standard” – these are inflatable by absorptive, water-repellent, and abrasion-
a “unique G-pump system.” resistant attributes . . .”

l Charnos’s Bioform bra replaces Sources: “Bra Wars,” Economist (December 2, 2000): 112;
underwiring with soft molded salon.com (August 28, 2000); US Patent Database.

brassieres, and fishing rods, continuing technological development is indicated by a
steady flow of new patents (see Strategy Capsule 12.2).
What is clear is that the pressure of competition and the limited opportunities for
technology-based advantage create impetus for innovation in other areas of compet-
itive strategy. The quest for new ways of doing business – “new game strategies” – was
referred to in Chapter 6. In relation to the innovation cycles identified by Abernathy
and Utterback (see Figure 10.2 in Chapter 10),13 it is possible that there is a third phase
of innovation – strategic innovation – which becomes most prominent once product
and process innovation have begun to slacken. Because strategic innovation requires
strategic initiatives that are new and unique, it is difficult to apply systematic, analyt-
ical approaches to their discovery and design. Value chain analysis can assist the
identification of “new game strategies” that reconfigure the sequence of activities
undertaken by the firm.
Strategic innovation may also result from redefining markets and market seg-
ments.14 This may involve:

CSAC12 1/13/07 9:25 Page 327


l Embracing new customer groups. Harley-Davidson has created a market for
expensive motorcycles among the middle aged and Sony has extended video
gaming from teenage boys to girls, adults and retirees. The most rapidly
growing churches – e.g. Jehova’s Witnesses in Russia and Amway Christian
Fellowship in America – tend to be those that recruit among underserved
social and demographic groups.
l Adding products and services that perform new but related functions. In the
US, Arco was an innovator in recreating the gas station as a convenience store.
In book retailing, large stores such as Barnes and Noble as well as some small
neighborhood bookstores have redefined book retailing by adding additional
products and services. Many of these innovative forms of differentiation
involve the creation of entirely new customer experiences – at restaurant
chains such as Hard Rock Café and Planet Hollywood the food is a relatively
minor contributor to the customer experience. Pine and Gilmore identify a
progression of economic value that begins with commodities and leads
through products and services before arriving at experiences. In the experience
economy, companies go beyond providing a product or service that meets a
clearly defined customer need and involve their customers in a process that
engages them at the emotional, intellectual, even spiritual, level.15
Baden-Fuller and Stopford show that strategic innovation in mature businesses
often results from the reconciliation of multiple (often opposing) performance goals.
Their case analysis of successful mature companies concludes:
1 Maturity is a state of mind, not a state of the business; every enterprise has
the potential for rejuvenation.
2 It is the firm that matters, not the industry. The industry sets a context, not a
prison for the firm. Not only can the creative firm achieve success within a
hostile industry environment, it can transform its industry environment
(e.g. Honda in motorcycles).
3 Strategic innovation is the basis for competitive advantage in industries where
the potential for competitive advantage seems limited. The essence of strategic
innovation is reconciling alternatives: quality at low cost (Toyota), variety at
low cost (Courtaulds), speed at low cost (Benetton), and so on.
4 Businesses should be selective in choosing their strategic territory. An island
kingdom is more defensible than the Hapsburg Empire. The firm’s market
scope needs to be limited by its resources and capabilities.
5 The pursuit of strategic innovation requires an entrepreneurial organization
with freedom to experiment and the capacity to learn.16
Rejuvenation represents as formidable a challenge to a mature enterprise as it does
to an aging university professor. Indeed, change is likely to be even more difficult for
organizations than for individuals. In Chapter 10, we noted the resistance to change
caused by organizational inertia. Resistance to innovation and renewal arises not just
from entrenched structures and systems but also from the propensity for managers to
be trapped within their industry’s conventional thinking about key success factors and
business practices. Chapter 4 noted how established firms’ responses to competitive
threats may be limited by industry-wide systems of belief. J.-C. Spender refers to these
common cognitive patterns as “industry recipes.”17 Studies of cognitive maps – the

CSAC12 1/13/07 9:25 Page 328


mental frameworks through which managers perceive and think about their environ-
ments and their companies – yield insights into why some firms are able to adapt
better than others. A study of organizational renewal among railroad companies found
that the ability of managers to learn in the form of changing their mental models of
the business was critical to their capacity to renew themselves.18
The ability to break away from conventional wisdom and establish a unique
positioning or novel form of differentiation may be critical in mature industries.
Costas Markides identifies several examples of such contrarian thinking, including
the following:

l Edward Jones, with 2,000 offices, mostly in the US but also in Canada and the
UK, has rejected the brokerage industry’s infatuation with economies of scale,
product diversification, integration with investment banks, and e-commerce.
Each office has just one investment adviser; there are no proprietary
investment products; and no online investing. Edward Jones’ strategy has
been built on face-to-face relationships, motivating its office managers to
develop their local business, and ambitious growth targets.19
l Enterprise Rent-A-Car has adopted a location strategy that is quite different
from its major competitors Hertz and Avis. Rather than concentrate on
serving the business traveler through locating at airports and downtown,
Enterprise concentrates on suburban locations, where it caters primarily to
the consumer market.20

How do companies break away from their traditional mindsets and achieve stra-
tegic innovation? According to Gary Hamel, the role of strategy should be to foster
revolution through reorganizing the strategy-making process. This means breaking
top management’s monopoly over strategy formulation, bringing in younger people
from further down the organization, and gaining involvement from those on the
periphery of the organization.21 Strategic innovation may be best thought of as a pro-
cess that involves a sequence of managerial actions: “journeys of strategic renewal”
and “trajectories of transformation.”22 Common to all these approaches is recognition
that strategic innovation goes beyond rethinking strategies; it also requires new
approaches to structuring and managing the mature business.

Strategy Implementation in Mature Industries:
Structure, Systems, and Style
If the key to success in mature industries is achieving operational efficiency and recon-
ciling this with innovation and customer responsiveness, achieving competitive
advantage in mature businesses requires implementing structures, systems, and
management styles that can mesh these multiple performance goals.

Efficiency through Bureaucracy
If maturity implies greater environmental stability, slower technological change,
and an emphasis on cost efficiency, what types of organization and management
approaches are called for? As we observed in Chapter 6, the conventional prescrip-
tion for stable environments was “mechanistic” organizations characterized by

CSAC12 1/13/07 9:25 Page 329


centralization, well-defined roles, and predominantly vertical communication.23 Henry
Mintzberg describes this formalized type of organization dedicated to the pursuit of
efficiency as the machine bureaucracy.24 Efficiency is achieved through standardized
routines, division of labor, and close management control based on bureaucratic
principles. Division of labor extends to management as well as operatives – high
levels of vertical and horizontal specialization are typical among managers. Vertical
specialization is evident in the concentration of strategy formulation at the apex of the
hierarchy, while middle and junior management supervise and administer through
the application of standardized rules and procedures. Horizontal specialization takes
the form of functional structures.
The machine bureaucracy as described by Mintzberg is a caricature of actual
organizations – probably the closest approximations are found in government de-
partments performing highly routine administrative duties (e.g., the Internal Revenue
Service or departments of motor vehicle licensing). However, in most mature indus-
tries, the features of mechanistic organizations are evident in highly routinized oper-
ations and application of highly detailed rules and procedures. McDonald’s may not
be a typical bureaucracy, but it certainly operates with highly standardized and refined
operating procedures that govern virtually every aspect of how it does business (see
the quotation that introduces this chapter). The characteristics of mechanistic organ-
ization and principles of bureaucracy are prominent among the large enterprises
found in most mature industries, whether we are looking at DaimlerChrysler, Exxon
Mobil, or HSBC. The key features of these mature organizations are summarized in
Table 12.1.

Beyond Bureaucracy
As was noted in Chapter 6, the past two decades have seen growing unpopularity of
bureaucratic approaches to management, especially in mature industries. Factors con-
tributing to this trend include:
l Increased environmental turbulence. Bureaucracy is conducive to efficiency in
stable environments. However, the centralized, structured organization cannot
readily adapt to change. Achieving flexibility to respond to external change
requires greater decentralization, less specialization, and looser controls.
l Increased emphasis on innovation. The organizational structure, control
systems, management style, and interpersonal relationships conducive to
efficiency are likely to hinder innovation. As mature enterprises sought new
opportunities for competitive advantage, so the disadvantages of formalized,
efficiency-oriented organizations became increasingly apparent.
l New process technology. The efficiency advantages of bureaucratized
organizations arise from the technical virtues of highly specialized,
systematized production methods. The electronics revolution has changed the
conditions for efficiency. Computer-integrated manufacturing processes
permit cost efficiency with greater product variety, shorter runs, and greater
flexibility. As automation displaces labor-intensive, assembly-line
manufacturing techniques, there is less need for elaborate division of labor
and greater need for job flexibility. Simultaneously, the electronic revolution
in the office is displacing the administrative bureaucracy that control and
information systems once required.

CSAC12 1/13/07 9:25 Page 330


TABLE 12.1 Strategy Implementation in Mature Industries: Conventional
Features of Organization and Management

STRATEGY Primary goal is cost advantage through economies of scale, capital-
intensive production of standardized product/service. Dichotomization
of strategy formulation (the preserve of top management) and strategy
implementation (carried down the hierarchy).

STRUCTURE Functional departments (e.g., production, marketing, customer service,
distribution). Distinction between line and staff. Clearly defined job
roles with strong vertical reporting/delegation relationships.

CONTROLS Performance targets are primarily quantitative and short term and are
elaborated for all members of the organization. Performance is closely
monitored by well-established, centralized management information
systems and formalized reporting requirements. Financial controls
through budgets and profit targets particularly important.

INCENTIVES Incentives are based on achievement of individual targets and are in the
form of financial rewards and promotion up the hierarchy. Penalties
exist for failure to attain quantitative targets, for failure to adhere to the
rules, and for lack of conformity to company norms.

COMMUNICATION Primarily vertical for the purposes of delegation and reporting. Lateral
communication limited, often achieved through interdepartmental
committees.

MANAGEMENT Primary functions of top management: control and strategic decision
making. Typical CEO: the administrator – who guides the organization
through establishing and operating organizational systems and
principles and building consensus (e.g., Alfred Sloan Jr. of General
Motors); and the autocrat – whose primary role is decision making and
who leads through aggressive use of power and sheer force of
personality (Lee Iacocca of Chrysler and Al Dunlap of Sunbeam).

l Alienation and conflict. The dependence of bureaucracy on
departmentalization, layering, and the control of some employees by others is
conducive to alienation and conflict.
Companies in mature industries have undergone substantial adjustment over the
past decade. Among large, long-established corporations management hierarchies have
been pruned, decision making decentralized and accelerated, and more open com-
munication and flexible collaboration fostered. The trend began in North America,
spread to continental Europe, and is now evident in Japan and Korea. The changes are
apparent in:
l Strategic decision processes that increase the role of business-level managers
and reduce the role of corporate management; an emphasis on the strategy
formulation process as more important than strategic plans per se.

CSAC12 1/13/07 9:25 Page 331


l This shifting of decision-making power to the business level has been
accompanied by shrinking corporate staffs.
l Less emphasis on economies of large-scale production and increased
responsiveness to customer requirements together with greater flexibility in
responding to changes in the marketplace.
l Increased emphasis on teamwork as a basis for organizing separate activities
to improve interfunctional cooperation and responsiveness to external
requirements.
l Wider use of profit incentives to motivate employees and less emphasis on
controls and supervision.
Despite the changes, the primary emphasis on cost efficiency remains. However, the
conditions for cost efficiency have changed. The most powerful force for organiza-
tional change in mature industries has been the inability of highly structured, cen-
tralized organizations to maintain their cost efficiency in an increasingly turbulent
business environment. As we observed in Chapter 9, the requirements for dynamic
efficiency are different from the requirements for static efficiency. Dynamic efficiency
requires flexibility, which necessitates higher levels of autonomy and nonhierarchical
coordination. A feature of the revitalization efforts of Jack Welch at General Electric,
Carlos Ghosn at Nissan and Renault, Stuart Rose at Marks & Spencer, John Browne
at British Petroleum, and Sandy Weill at Citigroup has been combining strong central
direction with increased decision-making autonomy at the business level. By relying
more on performance targets and less on approvals and committees, the old corpor-
ate empires have become more flexible and responsive while maintaining a strong
focus on efficiency.

Strategies for Declining Industries
The transition from maturity to decline can be a result of technological substitution
(typewriters, railroads), changes in consumer preferences (men’s suits), demographic
shifts (babyware in Italy), or foreign competition (cutlery in Sheffield, England).
Shrinking market demand gives rise to acute strategic issues. Among the key features
of declining industries are:
l Excess capacity.
l Lack of technical change (reflected in a lack of new product introduction and
stability of process technology).
l A declining number of competitors, but some entry as new firms acquire the
assets of exiting firms cheaply.
l High average age of both physical and human resources.
l Aggressive price competition.
Despite the inhospitable environment offered by declining industries, research by
Kathryn Harrigan has uncovered declining industries where at least some participants
earned surprisingly high profits. These included electronic vacuum tubes, cigars, and
leather tanning. However, elsewhere – notably in prepared baby foods, rayon, and
meat processing – decline was accompanied by aggressive price competition, com-
pany failures, and instability.25

CSAC12 1/13/07 9:25 Page 332


What determines whether or not a declining industry becomes a competitive
blood-bath? Two factors are critical: the balance between capacity and output, and the
nature of the demand for the product.

Adjusting Capacity to Declining Demand
The smooth adjustment of industry capacity to declining demand is the key to stabil-
ity and profitability during the decline phase. In industries where capacity exits from
the industry in an orderly fashion, decline can occur without trauma. Where sub-
stantial excess capacity persists, as has occurred in the steel industries of America and
Europe, in the bakery industry, in gold mining, and in long-haul bus transportation,
the potential exists for destructive competition. The ease with which capacity adjusts
to declining demand depends on the following factors:

l The predictability of decline. If decline can be forecast, it is more likely that
firms can plan for it. The decline of traditional photography with the advent
of digital imaging was anticipated and planned for. Conversely, the long-term
decline of the US and Western European steel industries has been obscured by
periodic cyclical upswings – most notably that of 2002–6. The more cyclical
and volatile the demand, the more difficult it is for firms to perceive the trend
of demand even after the onset of decline.
l Barriers to exit. Barriers to exit impede the exit of capacity from an industry.
The major barriers are:
– Durable and specialized assets. Just as capital requirements impose a
barrier to entry into an industry, those same investments also discourage
exit. The longer they last and the fewer the opportunities for using those
assets in another industry, the more companies are tied to that particular
industry.
– Costs incurred in plant closure. Apart from the accounting costs of writing
off assets, substantial cash costs may be incurred in redundancy payments
to employees, compensation for broken contacts with customers and
suppliers, dismantling the plant, and environmental clean-up.
– Managerial commitment. In addition to financial considerations, firms may
be reluctant to close plants for a variety of emotional and moral reasons.
Resistance to plant closure and divestment arises from pride in company
traditions and reputation, managers’ unwillingness to accept failure, and
loyalties to employees and the local community.
l The strategies of the surviving firms. Smooth exit of capacity ultimately
depends on the decisions of the industry players. The sooner companies
recognize and address the problem, the more likely it is that independent
and collective action can achieve capacity reduction. In European gasoline
retailing, for example, the problem of excess capacity was partially solved by
bilateral exchanges of service stations among the major oil companies.
Stronger firms in the industry can facilitate the exit of weaker firms by
offering to acquire their plants and take over their after-sales service
commitments. A key strategy among private equity firms has been initiating
“roll-ups” in declining industries – consolidating multiple acquisitions.

CSAC12 1/13/07 9:25 Page 333


The Nature of Demand
Where a market is segmented, the general pattern of decline can obscure the exis-
tence of pockets of demand that are not only comparatively resilient, but also price
inelastic. For example, despite the obsolescence of vacuum tubes after the adoption
of transistors, GTE Sylvania and General Electric earned excellent profits supplying
vacuum tubes to the replacement and military markets.26 In fountain pens, survivors
in the quality pen segment such as Cross and Mont Blanc have achieved steady sales
and high margins through appealing to high-income professionals and executives.
Despite overall decline of the cigar market, quality cigars have benefited from strong
demand and attractive margins.

Strategies for Declining Industries
Conventional strategy recommendations for declining industries are either to divest
or to harvest, i.e., to generate the maximum cash flow from existing investments with-
out reinvesting. However, these strategies assume that declining industries are inher-
ently unprofitable. If profit potential exists, then other strategies may be attractive.
Harrigan and Porter27 identify four strategies that can profitably be pursued either
individually or sequentially in declining industries.
l Leadership. By gaining leadership, a firm is well placed to outstay competitors
and play a dominant role in the final stages of the industry’s life cycle. Once
leadership is attained, the firm is in a good position to switch to a harvest
strategy and enjoy a strong profit stream from its market position.
Establishing leadership can be done by acquiring competitors, but a cheaper
way is to encourage competitors to exit (and then acquire their plants).
Inducements to competitors to exit may include showing commitment to the
industry, helping to lower their exit costs, releasing pessimistic forecasts of the
industry’s future, and raising the stakes – e.g., by supporting more stringent
environmental controls that make it costly for them to stay in business.
l Niche. Identify a segment that is likely to maintain a stable demand and that
other firms are unlikely to invade, then pursue a leadership strategy to
establish dominance within the segment. The most attractive niches are those
that offer the greatest prospects for stability and where demand is most
inelastic.
l Harvest. By harvesting, a firm maximizes its cash flow from existing assets,
while avoiding further investment. A harvesting strategy seeks to boost
margins wherever possible through raising prices and cutting costs by
rationalizing the number of models, number of channels, and number of
customers. Note, however, that a harvest strategy can be difficult to
implement. In the face of strong competition, harvesting may accelerate
decline, particularly if employee morale is adversely affected by a strategy
that offers no long-term future for the business.
l Divest. If the future looks bleak, the best strategy may be to divest the
business in the early stages of decline before a consensus has developed as to
the inevitability of decline. Once industry decline is well established, finding
buyers may be extremely difficult.

CSAC12 1/13/07 9:25 Page 334


FIGURE 12.1 Strategic alternatives for declining industries

COMPANY’S COMPETITIVE POSITION
Strengths in remaining Lacks strength in
demand pockets remaining demand pockets

Favorable to LEADERSHIP HARVEST
decline or or
INDUSTRY NICHE DIVEST
STRUCTURE
Unfavorable NICHE DIVEST
to decline or QUICKLY
HARVEST

Choosing the most appropriate strategy requires a careful assessment both of the
profit potential of the industry and the competitive position of the firm. Harrigan and
Porter pose four key questions:
l Can the structure of the industry support a hospitable, potentially profitable
decline phase?
l What are the exit barriers that each significant competitor faces?
l Do your company strengths fit the remaining pockets of demand?
l What are your competitors’ strengths in these pockets? How can their exit
barriers be overcome?
Selecting an appropriate strategy requires matching the opportunities remaining
in the industries to the company’s competitive position. Figure 12.1 shows a simple
framework for strategy choice.

Summary
Mature industries present challenging environ- Such strategies are typically implemented through
ments for the formulation and implementation of hierarchical organizations, with high levels of
business strategies. Competition – price competi- specialization and formalization, and centralized
tion in particular – is usually strong and competi- decision making directed toward maximizing
tive advantage is often difficult to build and static efficiency.
sustain: cost advantages are vulnerable to imita- Increased dynamism of mature industries res-
tion, differentiation opportunities are limited by ulting from international competition, economic
the trend to standardization. Stable positions of turbulence, and greater pressure for innovation
competitive advantage in mature industries are has had two consequences. First, the conditions
traditionally associated with cost advantage for cost efficiency have changed. In a dynamic
from economies of scale or experience, and dif- environment, cost efficiency is less dependent on
ferentiation advantage through brand loyalty. scale, specialization, and rigid control, and more

CSAC12 1/13/07 9:25 Page 335


on rapid adjustment to change. Second, as com- companies in mature industries – Wal-Mart in
petition has become more intense, companies retailing, BP in oil and gas, Nike in shoes and
(especially those in the advanced industrialized sportswear, and Coca-Cola in beverages – are
countries) have been forced to seek new sources companies that have achieved flexibility through
of competitive advantage through innovation and dismantling bureaucratic structures and proced-
differentiation. Reconciling the pursuit of scale ures, exploited new technology to combine variety
economies with the need for responsiveness and and flexibility with efficiency, encouraged high
flexibility, and the requirements of cost efficiency levels of employee commitment, and relentlessly
with the growing need for innovation and differ- pursued financial targets. We return to some of
entiation, poses complex strategic and organiza- these challenges and firms’ responses to them in
tional challenges. Some of the most successful Chapter 17.

Self-Study Questions
1 The clothing manufacturers of northern Italy are facing rapid decline as retail chains and
fashion houses increasingly outsource to China and other low-cost countries. What strategies
would you recommend to small and medium-sized Italian garment manufacturers to assist
them in surviving the onslaught of low-cost foreign competition?

2 Under Jacques Nasser, Ford’s response to intensifying competition in the auto industry was to
acquire a stable of luxury brands and forward integrate into car rental (Hertz), car repair
(Kwik Fit), and financial services. Under the present CEO, Bill Ford, the reverse strategy is
being pursued: Ford is divesting car rental, car repair, and financial services, and seeking
buyers for several of its luxury brands (including Aston Martin and Jaguar). Given the
characteristics of the industry and the company, examine the relative merits of each strategy
and explain which strategy you would favor.

3 In both Europe and North America, established airlines are desperately cutting costs to
compete with the increasing number of budget airlines. However, it is highly unlikely that
these airlines will ever match the cost efficiency of Southwest, Jetblue, or Ryanair. What
opportunities are there for established airlines to improve their competitive position through
differentiation strategies? Make specific proposals for how established airlines can
differentiate their customer offerings more effectively.

4 Department stores (e.g. Federated Department Stores and Mays in the US, Selfridges and
House of Fraser in the UK) face increasing competition from specialized chain retailers and
discount stores. What innovative strategies might department stores adopt to revitalize their
competitiveness?

CSAC12 1/13/07 9:25 Page 336


Notes
1 E. H. Rensi, “Computers at McDonald’s,” in J. F. 14 D. Abell, Managing with Dual Strategies (New York:
McLimore and L. Larwood (eds), Strategies . . . Successes Free Press, 1993): 75–8.
. . . Senior Executives Speak Out (New York: Harper & 15 B. J. Pine and J. Gilmore, “Welcome to the Experience
Row, 1988): 159– 60. Economy,” Harvard Business Review ( July–August
2 R. D. Buzzell and B. T. Gale, The PIMS Principles 1998): 97–105.
(New York: Free Press, 1987): 279. 16 C. Baden-Fuller and J. Stopford, Rejuvenating the
3 “European Leveraged Buy-outs,” Economist (August 10, Mature Business (Boston: HBS Press, 1994): especially
2006). Chapters 3 and 4.
4 T. Copeland, T. Koller, and J. Murrin, Valuation: 17 J.-C. Spender, Industry Recipes: The Nature and Sources
Measuring and Managing the Value of Companies, 3rd of Managerial Judgment (Oxford: Blackwell, 1989). On
edn (New York: Wiley, 2000): 305. a similar theme, see also A. S. Huff, “Industry Inﬂuences
5 R. Cibin and R. M. Grant, “Restructuring among the on Strategy Reformulation,” Strategic Management
World’s Leading Oil Companies,” British Journal of Journal 3 (1982): 119–31.
Management 7 (December 1996): 283–308. 18 P S. Barr, J. L. Stimpert, and A. S. Huff, “Cognitive
.
6 D. C. Hambrick and S. M. Schecter, “Turnaround Change, Strategic Action, and Organizational Renewal,”
Strategies for Mature Industrial-Product Business Units,” Strategic Management Journal 13, Summer Special Issue
Academy of Management Journal 26, no. 2 (1983): (1992): 15–36.
231–48. 19 “A Lesson in Small Town Economics,” Financial Times
7 P H. Grinyer, D. G. Mayes, and P McKiernan,
. . (November 30, 2000): 16.
Sharpbenders (Oxford: Basil Blackwell, 1988). 20 C. C. Markides, All the Right Moves (Boston: Harvard
8 G. R. Carroll and A. Swaminathan, “Why the Business School Press, 1999).
Microbrewery Movement? Organizational Dynamics of 21 G. Hamel, “Strategy as Revolution,” Harvard Business
Resource Partitioning in the American Brewing Review 96 ( July–August 1996): 69– 82.
Industry,” American Journal of Sociology 106 (2000): 22 C. Baden-Fuller and J. Stopford, op. cit.; Henk
715–62; C. Boone, G. R. Carroll, and A. van Volberda, “Toward the Flexible Form: How to Remain
Witteloostuijn, “Resource Distributions and Market Vital in Hypercompetitive Environments,” Organization
Partitioning: Dutch Daily Newspapers 1964–94,” Science 7 ( July–August 1996): 359– 87; H. Volberda, C.
American Sociological Review 67 (2002): 408–31. Baden-Fuller, and F. van den Bosch, “Mastering Strategic
9 A. W H. Grant and L. A. Schlesinger, “Realize Your
. Renewal,” Long Range Planning 34 (April 2001):
Customer’s Full Proﬁt Potential,” Harvard Business 159–78.
Review (September–October 1995): 59–72. 23 T. Burns and G. M. Stalker, The Management of
10 Capital One Financial Corporation, Harvard Business Innovation (London: Tavistock Institute, 1961).
School Case No. 9-700-124 (2000). 24 H. Mintzberg, Structure in Fives: Designing Effective
11 National Science Foundation, Research and Development Organizations (Englewood Cliffs, NJ: Prentice Hall,
in Industry: 2002 (www.nsf.gov). 1983): Chapter 9.
12 A. M. McGahan and B. S. Silverman, “How Does 25 K. R. Harrigan, Strategies for Declining Businesses
Innovative Activity Change as Industries Mature?,” (Lexington, MA: D. C. Heath, 1980).
International Journal of Industrial Organization 19, 26 K. R. Harrigan, “Strategic Planning for Endgame,”
no. 7 (2001): 1141– 60. Long Range Planning 15 (1982): 45–8.
13 W J. Abernathy and J. M. Utterback, “Patterns of
. 27 K. R. Harrigan and M. E. Porter, “End-Game Strategies
Industrial Innovation,” Technology Review ( June/July for Declining Industries,” Harvard Business Review
1978): 41–7. ( July–August 1983): 111–20.

Csac12[1].p

More Related Content

What's hot (15)

Viewers also liked (11)

Similar to Csac12[1].p (20)

More from Kinshook Chaturvedi (20)

Recently uploaded (20)

Csac12[1].p