CV _Abdullah_Highway Design Engineer

CV of Abdullah, PEng.
CURRICULUM VITAE
1. Proposed
Position
: Highway Designer / Highway Engineer (Self-supported MX
Road Software (SELECT series 3)-Road Design Software).
2. Name of
Firm
: Dongshin E & C Co., Ltd.
3. Name of
Expert
: ABDULLAH, PEng
4. Date of Birth : Dec 04th
, 1968 Citizenship: Bangladeshi
5. Education : M.Sc. in Civil Engineering (Transport), Premier University Of
Technology, Dhaka, 2013. MBA, Marketing, Northern University,
Dhaka, 2003. BSc. in Civil Engineering, Khulna University of
Engineering and Technology, Khulna, Bangladesh, 1990
6. Membership
of
Professional
Associations
: Bangladesh Professional Engineers Registration Board.
Fellow-Institute of Engineers Bangladesh
7. Other
Training
: Training received on highway design.of software “ MX Road”,” MX ROAD
Renew”, the training were organized by Bangladesh Consultants
Limited.Course coordinator was hired from Bently System India Pty Ltd.
Training received on highway design by means of a combination of
software “CivilCAD”,“GPS”and electronic survey equipment“Total station”,
Topcon the training were organized jointly by TOPCON SOUTH ASIA
PTE LTD, Singapure and ENTECH LOGISTIC LTD, Dhaka, Bangladesh.
Training received on highway design by means of a combination of
software “CivilCAD” and electronic survey equipment “Total station” the
training were organized jointly by Snowy Mountain Engineering Company
PTY (Australia) and Bangladesh Consultants Limited (Bangladesh). The
date were as followed:
13th
Dec- 16th
Dec 06 Training on MX Road presented by Mr. Sandeep
Sachdeva India
27th
September-30th
September 06 Training on MX Road presented by
Mr. Harsh Pareek India
17th
April 05 Training on Civil Cad , GPS & Surveying Engr Lim Boon
Kiet, Singapure
14th
Jan- 27th
Jan Training 99 on Civil Cad & Surveying presented by
Mr. Waker, Pakisthan
8. Countries of
Work
Experience
: Bangladesh, Afghanistan
9. Languages : Speaking Reading Writing
72

Bengali
English
native
Excellent
native
Excellent
native
Excellent
10.
From January’2016
Employer
Position Held
Employment
Record
:
:To till Date
: Dongshin E & C Co.,Ltd
: Highway Design Engineer
From: January’2015
Employer
Position Held
From: June’2014
Employer
Position Held
From: February’ 2014
Employer
Position held
:
:
:
:
:To December’ 2015
: Resource Planning and Management Consultants(RPMC)
:Highway Design Engineer
:To September’2014
Bets Consultants Ltd
:Highway Design Engineer
To May2014
HB consultants
Highway Engineer
From: February’ 2013
Employer
Position held
:
:
:
To 22nd
January’2014
BCL Associates Ltd
Highway Design Engineer
From: August 2012
Employer
Position held
:
:
:
To 7th
Dceember’12
Dongshin E&C.
From: May 2011
Employer
Position held
:
:
To 14th
August 2012
BCL ASSOCIATES LTD
From: February 2008
Employer
Position held
:
:
:
16th
December 2010
THE Louis Berger Group, INC.
From: Mar 2007
Employer
Position held
:
:
:
To January 2008
SMEC Int. Pvt. Ltd
From: Mar 2006
Employer
Position held
:
:
:
To February 2007
The Louis Berger Group, Inc, STUP Consultants PVT LTD, India,
Bangladesh Consultants Limited
From: Jul 2004
Employer
Position held
:
:
:
To Feb 2006
SMEC Int. Pvt. Ltd with Bangladesh Consultants Limited
From: Jan 2001
Employer
Position held
:
:
:
To Jun 2004
Japan Overseas Consultants Co, with Bangladesh Consultants Limited
Survey Engineer
73

From: Nov 1999
Employer
Position held
:
:
:
To Dec 2000
SMEC with Bangladesh Consultants Limited
Junior Bridge Engineer
From: Oct 1998
Employer
Position held
:
:
:
To Aug 1999
Japan Overseas Consultant Nathan Associates Inc, Bangladesh
Consultants Limited
CAD Operator/Survey Engineer
From: Aug 1995
Employer
Position held
:
:
:
To Jun 1998
Rendel Palmer & Triton with Nedeco and Bangladesh Consultants Ltd.
Construction Engineer
From: Jul 1993
Employer
Position held
:
:
:
To Jul 1993
Carl Bro International a/s with Bangladesh Consultants Limited
Site Engineer
From: Nov 1991
Employer
Position held
:
:
:
To Jun 1993
Carl Bangladesh Consultants Limited
Assistant Engineers
11. Detailed Tasks
Assigned
12. Works Undertaken that Best Illustrates Capability to Handle the
Tasks Assigned.
74

Survey Data Checking,
Create DTM, Draw
Alignment
(Horizontal and
Vertical), Quantity
Calculation,
Production of Plan,
Profile and Cross-
Section
Name of assignment or project: Preparation of a Pre-Feasibility Study for the
Bamiyan to Kandahar Economic Corridor (550 KM) financed by ADB
Year: January’16 to till date
Location: Afghanistan
Client: Ministry of Public Works (MPW)
Main project features: Road, Bridge, Culverts, Retaining wall, Causeway, Slope
Protection, Safety Barrier, Stone Masonry wall for Details Design.
Position held: Highway Design Engineer
Activities performed:
 Prepare the plan for Topographic Survey work and Design work
 Prepare the Civil Construction Plan in Microsoft Project and S-curve In excel.
 Process the Survey Data collecting from filed by Total station Check the data.
 Transfer the excel /AutoCAD data to MX Road software , then
 Made DTM and then start the Design work.
 We follow the AASHTO standard for Geometric Design.
 Prepare the Plan, Profile, X-section by MX Road.
 Details intersection, Drainage design
 Quantity calculation and cost estimate by using MX Road
 Prepared Different types of services details Road Markings and
Sign Signal Installation
Name of assignment or project: Coastal Climate Resilient Infrastructure Project
(CCRIP) financed by ADB (111km- Upazila Road)
Year: January’15 to December’2015
Location: Bangladesh
Client: Local Government Engineering Department (LGED), GOB
Main project features: Road, bridge, culvert,cyclone shelter, market improvement for
Details Design and supervision.
 Monitor the Survey Work.
 Check the Survey Data
 Transfer Survey Data from AutoCAD to MX Road
 Create DTM in MX ROAD
 Horizontal and vertical Design by using MX ROAD Plan, Profile and X-section
Design
 Earthwork calculation.Sign and Signaling
Name of assignment or project: Beharak TO Eskasim (110km) Road Feasibility
Study Project financed by Asian Development Bank
Year: June’14 to September’2014
Client: Ministry of Public Works
Main project features: Pavement, Embankment, Bridge, Stone Masonry Culvert,
RCC Box Culvert, Retaining Wall Construction
Positions held: Highway Design Engineer
Sign Signal Installation
75

Name of assignment or project: Kabul Urban Transport Efficiency Improvement
(KUTEI) Project financed by World Bank
Year: Feb’14 to till date
Client: Kabul Municipality
Main project features: Up gradation of Road from two lane to four lanes, existing
two lane road, round about and intersection improvement.. Design Review and
Construction supervision of 31.85 km Urban Road.
Position held: Highway Engineer
 Review the all survey data
 Review the road drawing
 Review the Round about, Intersection.
 Review the different type drain
creating
Name of assignment or project: Sub-regional Transport Project Preparatory Facilities
(STPPF) (Package-2) financed by ADB
Year: Feb’13 to 22nd
January’2014
Client: Roads and Highway Department, GoB
Main project features: Up gradation from two lane to four lanes, extension of bridge,
culvert for four lanes. Feasibility Study and details Design of 600km National Road.
 Monitor the Survey Work.
 Check the Survey Data
Design
 Earthwork calculation.
 Sign and Signaling
Name of assignment or project: Dara e Suf to Yakawalang Road Feasisibility study
project 182km financed by ADB.
Year: August 14 to 7th
Dec’12
Client: Ministry of Public Works, Afghanistan
Main project features: Pavement, Embankment, Bridge, Stone Masonry Culvert,
RCC Box Culvert, Retaining Wall Construction
Sign Signal Installation etc.
76

Name of assignment or project: Joydevpur – Mymensing road improvement project
87km financed by Government of Bangladesh.
Year: May 11 to 13th
August 12
Client: Roads and Highway Department, GoB
Main project features: Up gradation from two lane to four lanes, extension of bridge,
culvert for four. Design review and correct if where necessary by MX road.
Position held:Highway Design Engineer
 Transfer DTM to XM MX ROAD
 Horizontal and vertical Design by using MX ROAD
 Plan, Profile and X-section Design
Name of assignment or project: Details Design of Dushi to Bamyan 170km National
Road in Afghanistan under Infrastructure Rehabilitation Program in the 1st
phase
financed by USAID
Year: June 2009 to December’10
Location: Afghanistan.
Client: USAID
Main project features: Aerial Survey, GIS and Field Survey, Road Design, Pavement
,Culvert, Bridge, Causeway, Slope protection and Retain wall Design, Producing of
Drawing, BOQ and Specification
 Transfer TITN data to CIVIL 3D and then MX ROAD
Name of assignment or project: Design of 600 km Secondary Road USAID Strategic
Provisional Roads (TO12 SPR-SEA) in Afghanistan under Infrastructure
Rehabilitation Program in the 1st
phase financed by USAID, Keshim –Faizabad Road
Rehabilitation Projects and Ghazni - Gardez Road Project (final design).
Year: February 2008 to Dec 2010
Location: Afghanistan.
Client: USAID
Main project features: Aerial Survey, GIS and Field Survey, Road Design, Pavement
,Culvert, Bridge, Causeway, Slope protection and Retain wall Design, Producing of
Drawing, BOQ and Specification
 Transfer TIN data to CIVIL 3D and then MX ROAD
 Producing the drawing of Plan, Profile and X-section and utilities
 Details intersection, Drainage,
 Quantity calculation and cost estimate by using Moss
 Sign Signal and stripping
 Draw the culvert denial drawing of option 1& 2
 Quantity calculation of culvert denial
 Draw the structural drawing of different type of culvert
 Draw the drainage drawing
77

Name of assignment or project: Design of Road Infrastructure Improvement Project,
(RIIP-25) of Local Government Engineering Department 350km rural road Design,
financed by Asian Development Bank.
Year: Jul 2004 to Feb 2006 (19 months)
Client: Local Government Engineering Department
Main project features: Details Survey, Details Geometric design, Earthwork Quantity
Calculation.
• Guided the surveyors to conduct topographical survey of road by the use of
“Total Station”.
• Monitoring and supervision of Topographic survey work and conversion of
survey data in DTM form, which is an important aspect of any CAD design
exercise for the selected linkages as per the TOR.
• Processed the survey data, geometric design of the road (both Horizontal and
Vertical)
• Prepared the detail drawing (Base map, plan, Profile,X-section,Details
intersection, Round about, Drainage, Traffic sign signal),
• Quantity calculation by using Civil CAD and Auto CAD
• Road Markings and Traffic Signs,
• Prepare General Arrangement and Setting out details of Highways and
Internal Roads.
• Prepare different types of services details such as Foul drainage and
Irrigation, Telephone, Electricity, Road Markings and Traffic Signs, Water and
Gas, Surface water Drainage etc.
• Coordinating with the client to satisfy their requirement for the project and
various other agencies to collect the information regarding the project and
make it a success.
•
Name of assignment or project: 1998 Flood Damage Rehabilitation Project of Roads
& Highways Department (RHD), financed by World Bank.
Year: Nov 1999 to Dec 2000 (13 months)
Client: Roads & Highways Department (RHD)
Main project features: Two Nos 50 Long New Bridge and Approach Road
Construction
Positions held: Junior Bridge Engineer
• Responsible for supervision of rehabilitation works of road, two nos. 50 m long
bridge at Sirajganj.
• Maintain the liaison with RHD officer’s and SMEC-BCL Senior officer’s and
Colleague
• Setting out the Bridge and approach road alignment,
• Check the pile point by Total Station
• Check the rebar casing, shuttering & concrete pouring in every stage
Name of assignment or project: Jamuna Bridge Project (Contract-3),Under the
Jamuna Multipurpose Bridge Authority.This Project was funded by World Bank, Asian
development Bank and OECF
Year: Aug 1995 to Jun 1998 (34 months)
Client: Jamuna Multipurpose Bridge Authority
Main project features: 15Km New Approach Road, New Bridge and Culvert
Construction Supervision.
Positions held: Construction Engineer
• Responsible for supervision of construction of 15 km long East Approach
Road to the Bridge for Jamuna Multipurpose Bridge Project.
• Responsible for 8 nos slab bride 10 nos box culverts, Toll plaza, Tunnel,
drainage in the brige end facilities
• Responsible for checking the drawing, Horizontal control points & TBM
• Set out the alignment by Total Station
Prepared different types of services details such as surface drainage,
78

Telephone, Electricity, in the Bridge End Facilities and Engineers Facilities Area and
Road
Name of assignment or project: Post-Flood Rehabilitation of Rural Health
Infrastructure Project under the Ministry of Education, financed by Europien Economic
Commissiom
Year: Jul 1993 to Jun1995 (23 months)
Client: Ministry of Education
Main project features: Pucca and Semi-Pucca School Building Construction
Supervision.
Positions held: Site Engineer
• Responsible for supervision of rehabilitation works of Primary school in
Rajshahi Zone for Ministry of Education
• Maintain the liason of PD’s officer’s and Carl Bro-BCL Senior officer’s and
Colleague and Contractor
Give the layout by EDMs and level by Auto Level Machine
Name of assignment or project: FFW Bridge and Culverts Structures Programme,
1990-93, under the Directorate of Relief and Rehabilitation. funded by USAID
Year: Nov 1991 to Jun 1993 (20 months)
Client: Directorate of Relief and Rehabilitation
Main project features: New Bridge and Culvert Construction Supervision
Positions held: Assistant Engineer
• Responsible for supervision of a RCC bridge at Patnitala, Naogaon District
• Maintains the liaison with USAID officer’s and BCL, Senior officer’s and
Colleague. Coordinating with the respective department, officers and
Contractor.
Give the layout by EDMs and level by Auto Level Machine
13. Certification:
I, the undersigned, certify to the best of my knowledge and belief –
(i) This CV correctly describes my qualifications and my experience
(ii) I am not employed by the Executing / Implementing Agency
(iii) I am in regular full-time employment with the Consultant or the Sub-Consultant
I understand that any wilful misstatement described herein may lead to my disqualification or dismissal, if
engaged.
Full name of authorized representative: Abdullah
79
Date: 03/01/2016
[Signature of expert or authorized representative of the firm] Day / Month / Year

CV _Abdullah_Highway Design Engineer

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to CV _Abdullah_Highway Design Engineer (20)

CV _Abdullah_Highway Design Engineer