data clean.ppt

CIS664-Knowledge Discovery
and Data Mining
Vasileios Megalooikonomou
Dept. of Computer and Information Sciences
Temple University
Data Preprocessing
(based on notes by Jiawei Han and Micheline Kamber)

Data Integration
• Data integration:
– combines data from multiple sources into a coherent store
• Schema integration
– integrate metadata from different sources
– Entity identification problem: identify real world entities from
multiple data sources, e.g., A.cust-id  B.cust-#
• Detecting and resolving data value conflicts
– for the same real world entity, attribute values from different
sources are different
– possible reasons: different representations, different scales,
e.g., metric vs. British units, different currency

Handling Redundant Data in
Data Integration
• Redundant data occur often when integrating multiple DBs
– The same attribute may have different names in different databases
– One attribute may be a “derived” attribute in another table, e.g.,
annual revenue
• Redundant data may be able to be detected by correlational
analysis
• Careful integration can help reduce/avoid redundancies and
inconsistencies and improve mining speed and quality
B
A
B
A
n
B
B
A
A
r


)
1
(
)
)(
(
,






Data Transformation
• Smoothing: remove noise from data (binning,
clustering, regression)
• Aggregation: summarization, data cube construction
• Generalization: concept hierarchy climbing
• Normalization: scaled to fall within a small,
specified range
– min-max normalization
– z-score normalization
– normalization by decimal scaling
• Attribute/feature construction
– New attributes constructed from the given ones

Data Transformation: Normalization
• min-max normalization
• z-score normalization
• normalization by decimal scaling
A
A
A
A
A
A
min
new
min
new
max
new
min
max
min
v
v _
)
_
_
(
' 




A
A
dev
stand
mean
v
v
_
'


j
v
v
10
' Where j is the smallest integer such that Max(| |)<1
'
v
Particularly useful for classification (NNs, distance measurements,
nn classification, etc)

Agenda
• Why preprocess the data?
• Data cleaning
• Data integration and transformation
• Data reduction
• Discretization and concept hierarchy generation
• Summary

Data Reduction
• Problem:
Data Warehouse may store terabytes of data:
Complex data analysis/mining may take a very
long time to run on the complete data set
• Solution?
– Data reduction…

•Obtains a reduced representation of the data
set that is much smaller in volume but yet
produces the same (or almost the same)
analytical results
•Data reduction strategies
–Data cube aggregation
–Dimensionality reduction
–Data compression
–Numerosity reduction
–Discretization and concept hierarchy generation
Data Reduction

Data Cube Aggregation
• Multiple levels of aggregation in data cubes
– Further reduce the size of data to deal with
• Reference appropriate levels
– Use the smallest representation capable to solve the
task
• Queries regarding aggregated information should
be answered using data cube, when possible

Dimensionality Reduction
• Problem: Feature selection (i.e., attribute subset selection):
– Select a minimum set of features such that the probability
distribution of different classes given the values for those features
is as close as possible to the original distribution given the values
of all features
– Nice side-effect: reduces # of attributes in the discovered patterns
(which are now easier to understand)
• Solution: Heuristic methods (due to exponential # of
choices) usually greedy:
– step-wise forward selection
– step-wise backward elimination
– combining forward selection and backward elimination
– decision-tree induction

Example of Decision Tree Induction
Initial attribute set:
{A1, A2, A3, A4, A5, A6}
A4 ?
A1? A6?
Class 1 Class 2 Class 1 Class 2
> Reduced attribute set: {A1, A4, A6}
nonleaf nodes: tests
branches: outcomes of tests
leaf nodes: class prediction

Data Compression
• String compression
– There are extensive theories and well-tuned algorithms
– Typically lossless
– But only limited manipulation is possible without expansion
• Audio/video, image compression
– Typically lossy compression, with progressive refinement
– Sometimes small fragments of signal can be reconstructed
without reconstructing the whole
• Time sequence is not audio
– Typically short and vary slowly with time

Data Compression
Original Data Compressed
Data
lossless
Original Data
Approximated

Wavelet Transforms
• Discrete wavelet transform (DWT):
linear signal processing
• Compressed approximation: store only a small fraction of
the strongest of the wavelet coefficients
• Similar to discrete Fourier transform (DFT), but better lossy
compression, localized in space (conserves local details)
• Method (hierarchical pyramid algorithm):
– Length, L, must be an integer power of 2 (padding with 0s, when necessary)
– Each transform has 2 functions:
• smoothing (e.g., sum, weighted avg.), weighted difference
– Applies to pairs of data, resulting in two sets of data of length L/2
– Applies the two functions recursively, until reaches the desired length
Haar2 Daubechie4

• Given N data vectors from k-dimensions, find
c <= k orthogonal vectors that can be best used
to represent data
– The original data set is reduced (projected) to one
consisting of N data vectors on c principal components
(reduced dimensions)
• Each data vector is a linear combination of the c
principal component vectors
• Works for ordered and unordered attributes
• Used when the number of dimensions is large
Principal Component Analysis (PCA)
Karhunen-Loeve (K-L) method

X1
X2
Y1
Y2
Principal Component Analysis
•The principal components (new set of axes) give important information about variance.
•Using the strongest components one can reconstruct a good approximation of the
original signal.

Numerosity Reduction
• Parametric methods
– Assume the data fits some model, estimate model
parameters, store only the parameters, and discard the data
(except possible outliers)
– E.g.: Log-linear models: obtain value at a point in m-D
space as the product on appropriate marginal subspaces
• Non-parametric methods
– Do not assume models
– Major families: histograms, clustering, sampling

Regression and Log-Linear Models
• Linear regression: Data are modeled to fit a straight
line:
– Often uses the least-square method to fit the line
• Multiple regression: allows a response variable y to
be modeled as a linear function of multidimensional
feature vector (predictor variables)
• Log-linear model: approximates discrete
multidimensional joint probability distributions

• Linear regression: Y =  +  X
– Two parameters ,  and  specify the line and are to be
estimated by using the data at hand.
– using the least squares criterion to the known values of Y1,
Y2, …, X1, X2, ….
• Multiple regression: Y = b0 + b1 X1 + b2 X2.
– Many nonlinear functions can be transformed into the above.
• Log-linear models:
– The multi-way table of joint probabilities is approximated by
a product of lower-order tables.
– Probability: p(a, b, c, d) = ab acad bcd
Regression Analysis and Log-Linear Models

Histograms
• Approximate data
distributions
• Divide data into buckets
and store average (sum) for
each bucket
• A bucket represents an
attribute-value/frequency
pair
• Can be constructed
optimally in one dimension
using dynamic
programming
• Related to quantization
problems. 0
5
10
15
20
25
30
35
40
10000 30000 50000 70000 90000

Clustering
• Partition data set into clusters, and store cluster representation only
• Quality of clusters measured by their diameter (max distance
between any two objects in the cluster) or centroid distance (avg.
distance of each cluster object from its centroid)
• Can be very effective if data is clustered but not if data is “smeared”
• Can have hierarchical clustering (possibly stored in multi-
dimensional index tree structures (B+-tree, R-tree, quad-tree, etc))
• There are many choices of clustering definitions and clustering
algorithms (further details later)

Sampling
• Allow a mining algorithm to run in complexity that is
potentially sub-linear to the size of the data
• Cost of sampling: proportional to the size of the sample,
increases linearly with the number of dimensions
• Choose a representative subset of the data
– Simple random sampling may have very poor performance in the
presence of skew
• Develop adaptive sampling methods
– Stratified sampling:
• Approximate the percentage of each class (or subpopulation of
interest) in the overall database
• Used in conjunction with skewed data
• Sampling may not reduce database I/Os (page at a time).
• Sampling: natural choice for progressive refinement of a
reduced data set.

Sampling
Raw Data Cluster/Stratified Sample

Hierarchical Reduction
• Use multi-resolution structure with different degrees of
reduction
• Hierarchical clustering is often performed but tends to
define partitions of data sets rather than “clusters”
• Parametric methods are usually not amenable to
hierarchical representation
• Hierarchical aggregation
– An index tree hierarchically divides a data set into partitions
by value range of some attributes
– Each partition can be considered as a bucket
– Thus an index tree with aggregates stored at each node is a
hierarchical histogram

Discretization/Quantization
• Three types of attributes:
– Nominal — values from an unordered set
– Ordinal — values from an ordered set
– Continuous — real numbers
• Discretization/Quantization:
divide the range of a continuous attribute into intervals
– Some classification algorithms only accept categorical
attributes.
– Reduce data size by discretization
– Prepare for further analysis
x1 x2 x3 x4 x5
y1 y2 y3 y4 y5 y6

Discretization and Concept Hierarchy
• Discretization
– reduce the number of values for a given continuous
attribute by dividing the range of the attribute into
intervals. Interval labels can then be used to replace actual
data values.
• Concept Hierarchies
– reduce the data by collecting and replacing low level
concepts (such as numeric values for the attribute age) by
higher level concepts (such as young, middle-aged, or
senior).

Discretization and concept hierarchy
generation for numeric data
• Hierarchical and recursive decomposition using:
– Binning (data smoothing)
– Histogram analysis (numerosity reduction)
– Clustering analysis (numerosity reduction)
• Entropy-based discretization
• Segmentation by natural partitioning

Entropy-Based Discretization
• Given a set of samples S, if S is partitioned into two intervals S1 and
S2 using threshold T on the value of attribute A, the information
gain resulting from the partitioning is:
where the entropy function E for a given set is calculated based on
the class distribution of the samples in the set. Given m classes the
entropy of S1 is:
where pi is the probability of class i in S1.
• The threshold that maximizes the information gain over all possible
thresholds is selected as a binary discretization.
• The process is recursively applied to partitions obtained until some
stopping criterion is met, e.g.,
• Experiments show that it may reduce data size and improve
classification accuracy
)
(
|
|
|
|
)
(
|
|
|
|
)
,
( 2
2
1
1
S
S
S
S E
S
E
S
T
S
I 



 )
,
(
)
( T
S
I
S
E
)
(
log
)
( 2
1
1 i
m
i
i p
p
S
E 




Segmentation by natural partitioning
• 3-4-5 rule can be used to segment numeric data into
relatively uniform, “natural” intervals.
• It partitions a given range into 3,4, or 5 equiwidth
intervals recursively level-by-level based on the value
range of the most significant digit.
* If an interval covers 3, 6, 7 or 9 distinct values at the most
significant digit, partition the range into 3 equi-width intervals
* If it covers 2, 4, or 8 distinct values at the most significant digit,
partition the range into 4 intervals
* If it covers 1, 5, or 10 distinct values at the most significant digit,
partition the range into 5 intervals

Example of 3-4-5 rule
(-$4000 -$5,000)
(-$400 - 0)
(-$400 -
-$300)
(-$300 -
-$200)
(-$200 -
-$100)
(-$100 -
0)
(0 - $1,000)
(0 -
$200)
($200 -
$400)
($400 -
$600)
($600 -
$800) ($800 -
$1,000)
($2,000 - $5, 000)
($2,000 -
$3,000)
($3,000 -
$4,000)
($4,000 -
$5,000)
($1,000 - $2, 000)
($1,000 -
$1,200)
($1,200 -
$1,400)
($1,400 -
$1,600)
($1,600 -
$1,800)
($1,800 -
$2,000)
msd=1,000 Low=-$1,000 High=$2,000
Step 2:
Step 4:
Step 1: -$351 -$159 profit $1,838 $4,700
Min Low (i.e, 5%-tile) High(i.e, 95%-0 tile) Max
count
(-$1,000 - $2,000)
(-$1,000 - 0) (0 -$ 1,000)
Step 3:
($1,000 - $2,000)

Concept hierarchy generation for
categorical data
• Categorical data: no ordering among values
• Specification of a partial ordering of attributes
explicitly at the schema level by users or experts
• Specification of a portion of a hierarchy by
explicit data grouping
• Specification of a set of attributes, but not of their
partial ordering
• Specification of only a partial set of attributes

Concept hierarchy generation w/o data
semantics - Specification of a set of attributes
Concept hierarchy can be automatically generated
based on the number of distinct values per attribute
in the given attribute set. The attribute with the
most distinct values is placed at the lowest level of
the hierarchy (limitations?)
country
province_or_ state
city
street
15 distinct values
65 distinct values
3567 distinct values
674,339 distinct values

Summary
• Data preparation is a big issue for both warehousing
and mining
• Data preparation includes
– Data cleaning and data integration
– Data reduction and feature selection
– Discretization
• A lot a methods have been developed but still an
active area of research

data clean.ppt

More Related Content

Similar to data clean.ppt (20)

Recently uploaded (20)

data clean.ppt