★Data Logger Monitoring System★
0 likes536 views
This document provides information on various data loggers in the EasyLog EL-USB series. It includes: 1. A table comparing the key specifications of different models, including their measurement functions, ranges, and resolutions. Models measure temperature, humidity, voltage, current and other parameters. 2. Descriptions of common features across the series such as the programmable alarms, memory storage, and LED indicators. Loggers interface with PCs via USB to set up and download data. 3. An overview of the simple programming and deployment process for the loggers, as well as the easy method to upload and analyze the recorded data on a PC.
★Data Logger Monitoring System★
- 1. Measurement Model EL-USB (click on page number to jump to page) Function Range -LITE -1 -1- LCD -1- RCG -1- PRO -2 -2+ -2- LCD -2- LCD+ -3 -4 -5 -ACT -CO -TC -TC- LCD -TP- LCD -TP- LCD+ Temperature -10 to +50°C (+14to +122°F) 3 Temperature -35 to +80°C (-31 to +176°F) 4 5 Temperature -20 to +60°C (-4 to +140°F) 6 High Temperature -40 to +125°C (-40 to +257°F) 7 19 20 Humidity, temperature, dew point 0 to 100% RH -35 to +80°C (-31 to +176°F) 8 9 10 11 Voltage 0 to 30 VDC 12 Process current 4 to 20 mA 13 Event, State, Count 3-28 VDC 14 Current -1000 to 1000 mV 15 Carbon monoxide 0 to 1000 ppm 16 Thermocouple -130 to +900°C -200 to +1300°C -200 to +350°C 17 18 EasyLog Data Logger Series DATAQ Instruments, Inc. • 241 Springside Drive • Akron, Ohio 44333 • Tel: 330-668-1444 • Email: support@dataq.com • www.dataq.com EasyLog Products for Any Application From temperature and humidity to carbon monoxide trending, there’s an EasyLog data logger that’s right for you. Overview EasyLog model EL-USB series products are a line of low cost, compact, battery-operated data loggers with built-in memory and USB interface. Each product in the line offers a specific measurement function and range (see table below). Features shared by all EasyLog data loggers are: • Programmable high and low alarm thresholds. • All data is recorded to built-in, non-volatile memory. EasyLog data loggers do not lose readings when the battery is discharged or re- placed. • Automatic time and date stamping of logged data. • Program the logger to begin recording immediately, or at a specific date and time. • Bright, multi-color LEDs indicate status and alarm conditions during logging. • Built-in USB interface for easy setup using any PC. • Built-in, replaceable lithium battery (provided). • Intrinsic isolation for voltage and current measurements. • Removable cover protects the USB interface. • Removable clip secures the instrument during transport or deployment. • EasyLog application software for data logger setup, data download, and analysis.
- 2. EasyLog Data Loggers 330-668-1444 2 www.dataq.com Easy to Program and Deploy Getting an EasyLogger product ready to acquire data is simple: 1. Remove the protective USB cover (image 1). 2. Plug the instrument into any convenient USB port. 3. Program the data logger with the provided EasyLog software (image 2): • Give the logger a unique name (convenient when deploying multiple units). • Select the required sample rate. • Select high and/or low alarm thresholds. • Select the specific date and time to begin logging. Now remove the data logger from the USB port, replace the USB cover, and deploy the instrument wherever you need it. Easy to Upload and Analyze Data Whether you want to review stored data using the supplied appli- cation or using Microsoft Excel, getting meaningful results from recorded data is fast and easy: 1. Remove the protective USB cover. 2. Plug the instrument back into the PC’s USB port. 3. Use EasyLog software to stop recording, access the instrument’s stored data, and save it to a file that you name on the PC, all in one easy operation. The file format is Excel- compatible. 4. Immediately EasyLog’s Graph utility is enabled to display all the stored data in one compressed view. 5. A cursor allows you to determine signal magnitude and time and date of acquisition for any value, and a magnifier utility allows you to zoom in for a closer look over any range – Easy and fast. 6. For more custom analysis and report generation, simply import the stored data file to Microsoft Excel for virtually un- limited flexibility in how you view and interpret your results.
- 3. www.dataq.com 3 330-668-1444 EL-USB-LITE Temperature Data Logger Features • -10 to +50°C (+14 to +122°F) Measurement Range • USB Interface for Set-up and Data Download • 2 User-Programmable Alarm Thresholds • Bright Red and Green LED Indication • Replaceable Internal Lithium Battery • 30-minute fixed sample rate (one sample every 30 min) Programmable Elements • Logger Name • °C, °F • High and Low Alarms • Start Date and Start Time Record Times Sampling Interval Record Times 1 sample every 30 minutes 1 month Specifications Specification Minimum Typical Maximum Unit Measurement Range -10 (+14) +50 (+122) °C (°F) Internal Resolution 1 (2) °C (°F) Accuracy (overall error) ±2.5 (±4.5) °C (°F) Logging Rate every 30 minutes - Memory Capacity 4,080 samples Operating Temperature Range -10 (+14) +50 (+122) °C (°F) Battery Life 1 Month Ordering Information Description Order Number Temperature Data Logger Includes EL-USB-LITE data logger, software on CD, and battery. EL-USB-LITE
- 4. Features • -35 to +80°C (-31 to +176°F) Measurement Range • USB Interface for Set-up and Data Download • 2 User-Programmable Alarm Thresholds • Bright Red, Green and Orange LED Indication • Replaceable Internal Lithium Battery • IP 67 Protection (totally protected against dust; protected against liquid immersion up to 1m) Programmable Elements • Logger Name • °C, °F • Logging Rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Start Date and Start Time Specifications Specification Minimum Typical Maximum Unit Measurement Range -35 (-31) +80 (176) °C (°F) Internal Resolution 0.5 (1) °C (°F) Accuracy (overall error) ±1 (±2) °C (°F) Logging Rate every 10s every 12hr - Memory Capacity 16,382 samples Operating Temperature Range -35 (-31) +80 (176) °C (°F) Battery Life 1* Year *@ 25 °C and 1m logging interval. Ordering Information Description Order Number Temperature Data Logger Includes EL-USB-1 data logger, software on CD, and battery. EL-USB-1 Battery Replacement battery. BAT 3V6 Case Rugged metal alloy design for harsh conditions. Waterproof to IP-67/NEMA-4X EL-USB-CASE Record Times Sampling Interval Record Times 1 sample every 10 seconds 45 hours 1 sample every minute 11 days 1 sample every 5 minutes 56 days 1 sample every 30 minutes 11 months 1 sample every hour 1.8 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years EL-USB-CASE EL-USB-1 Temperature Data Logger 330-668-1444 4 www.dataq.com
- 5. Features • -35 to +80°C (-31 to +176°F) Measurement Range • USB Interface for Set-up and Data Download • User-Programmable Alarm Thresholds • High contrast LCD, with two and a half digit temperature and humidity display function • Immediate, delayed and push-to-start logging • Status Indication via Red and Green LEDs • Supplied with Replaceable Internal Lithium Battery • IP 67 Protection (totally protected against dust; protecte against liquid immersion up to 1m) when cap is fitted. Programmable Elements • Logger Name • °C, °F • Logging Rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Immediate, delayed and push-to-start logging • Display off, on for 30 seconds after button press , or permanently on • Data rollover (Allows unlimited logging periods by overwriting the oldest data when the memory is full) EL-USB-1-LCD Temperature Data Logger Specifications Specification Minimum Typical Maximum Unit Measurement Range -35 (-31) +80 (176) °C (°F) Internal Resolution 0.1 (0.2) °C (°F) Accuracy (overall error) ±0.5 (±1) ±1.5 (±3) °C (°F) Logging Rate every 10s every 12hr - Memory Capacity 16,378 samples Operating Temperature Range -35 (-31) +80 (176) °C (°F) Battery Life 1* Year *@ 25 °C and 1m logging interval. Record Times Sampling Interval Record Times 1 sample every 10 seconds 45 hours 1 sample every minute 11 days 1 sample every 5 minutes 56 days 1 sample every 30 minutes 11 months 1 sample every hour 1.8 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years Ordering Information Description Order Number Temperature Data Logger Includes EL-USB-1-LC data logger, software on CD, and battery. EL-USB-1-LCD Battery Replacement battery. BAT 3V6 www.dataq.com 5 330-668-1444
- 6. 330-668-1444 6 www.dataq.com EL-USB-1-RCG Rechargeable Temperature Data Logger Features • -20 to +60°C (-4 to +140°F) Measurement Range • Stainless Steel (316 grade) case • Environmental protection to IP67 • Rechargeable lithium-ion battery • Bi-color status LEDs behind protective glass window • Mini-USB interface for set-up and data download • User programmable alarm thresholds • Immediate and delayed start logging • Supplied with Windows control software and USB cable Programmable Elements • Logger Name • °C, °F • Logging Rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Start Date and Start Time • Data Rollover Record Times Sampling Interval Record Times 1 sample every second 4.5 hours 1 sample every 10 seconds 45 hours 1 sample every minute 11 days 1 sample every 5 minutes 56 days 1 sample every 30 minutes 11 months 1 sample every hour 1.8 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years Ordering Information Description Order Number Temperature Data Logger Includes EL-USB-1-RCG data logger, software on CD, and battery. EL-USB-1-RCG Specifications Specification Minimum Typical Maximum Unit Measurement Range -20 (-4) +60 (+140) °C (°F) Internal Resolution 0.1 (0.2) °C (°F) Accuracy (overall error) ±1 (±2) °C (°F) Logging Rate every 1s every 12hr - Memory Capacity 16,382 Samples Operating Temperature Range -20 (-4) +60 (+140) °C (°F) Recharging Time 5 Hours Charging Temperature Range 0(+32) +20(+68) +45 (+113) °C (°F) Battery Life 1* 4** Weeks * @ -20°C (-4°F), 1 second logging rate; ** @ 20°C (68°F), 1 minutes logging rate
- 7. EL-USB-1-PRO High Temperature Data Logger Features • -40 to +125°C (-40 to +257°F) Measurement Range • Stainless Steel case • USB Interface for Set-up and Data Download • User-Programmable Alarm Thresholds • Immediate and delayed logging • Replaceable high capacity internal Lithium Battery • IP 67 Protection (totally protected against dust; protected against liquid immersion up to 1m) Programmable Elements • Logger Name • °C, °F • Logging Rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Start Date and Start Time • Data rollover (FIFO circular recording) Specifications Specification Minimum Typical Maximum Unit Measurement Range -40 (-40) +125 (257) °C (°F) Internal Resolution 0.1 (0.2) °C (°F) Accuracy (overall error) ±0.2 (±0.4) °C (°F) Logging Rate every 1s every 12hr - Memory Capacity 32,510 samples Operating Temperature Range -40 (-40) +125 (257) °C (°F) Battery Life 1* Year *@ -20°C and 1s logging interval. Ordering Information Description Order Number Temperature Data Logger Includes EL-USB-1-PRO data logger, software on CD, and battery. EL-USB-1-PRO Battery Replacement battery. BAT 3V6 PRO Record Times Sampling Interval Record Times 1 sample every second 9 hours 1 sample every 10 seconds 90 hours 1 sample every minute 22 days 1 sample every 5 minutes 112 days 1 sample every 30 minutes 22 months 1 sample every hour > 2 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years www.dataq.com 7 330-668-1444
- 8. EL-USB-2 Humidity, Temperature and Dew Point Data Logger Features • 0 to +100%RH Measurement Range • -35 to +80°C (-31 to +176°F) Measurement Range • Dew point automatically calculated from RH and temperature • USB Interface for Set-up and Data Download • User-Programmable Alarm Thresholds for %RH & T • Status Indication via Red and Green LEDs • Supplied with Replaceable Internal Lithium Battery Programmable Elements • Logger Name • °C, °F • Logging Rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms for humidity and temperature • Start Date and Start Time Ordering Information Description Order Number RH, Temp, and Dew Point Data Logger Includes EL-USB-2 data logger, software on CD, and battery. EL-USB-2 Battery Replacement battery. BAT 3V6 Record Times Sampling Interval Record Times 1 sample every 10 seconds 45 hours 1 sample every minute 11 days 1 sample every 5 minutes 56 days 1 sample every 30 minutes 11 months 1 sample every hour 1.8 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years Specifications Specification Minimum Typical Maximum Unit Relative Humidity Measurement Range 0 100 %RH Humidity Repeatability (short term) ±0.1 %RH Accuracy (overall error, 20-80% RH) ±3.0* %RH Internal Resolution 0.5 %RH Long-term Stability 0.5 %RH/Yr Temperature Measurement Range -35 (-31) ±80 (±176) °C (°F) Repeatability ±0.1 (±0.2) °C (°F) Accuracy (overall error) ±0.5 (±1) ±2 (±4) °C (°F) Internal Resolution 0.5 (1) °C (°F) Dew Point Accuracy (overall error) (25°C, 40-100%RH) ±1.1 (±2)** °C (°F) Logging Rate every 10s every 12hr - Memory Capacity 16,382 samples Operating Temperature Range -35 (-31) +80 (176) °C (°F) Battery Life 1*** Year * This specifies the overall error in the logged readings, for relative humidity measurements between 20 and 80%RH. ** This specifies the overall error in the calculated dew point, for relative humidity measurements between 40 and 100%RH at 25°C. *** Depending on sample rate, ambient temperature and use of alarm LEDs 330-668-1444 8 www.dataq.com
- 9. www.dataq.com 9 330-668-1444 EL-USB-2+ Humidity, Temperature and Dew Point Data Logger Features • More accurate than the EL-USB-2 • 0 to +100%RH Measurement Range • -35 to +80°C (-31 to +176°F) Measurement Range • Dew point automatically calculated from RH and temperature • USB Interface for Set-up and Data Download • User-Programmable Alarm Thresholds for %RH & T • Status Indication via Red and Green LEDs • Supplied with Replaceable Internal Lithium Battery Programmable Elements • Logger Name • °C, °F • Logging Rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms for humidity and temperature • Start Date and Start Time • Data rollover (FIFO circular recording) Ordering Information Description Order Number Higher Accuracy RH, Temp, and Dew Point Data Logger Includes EL-USB-2+ data logger, software on CD, and battery. EL-USB-2+ Battery Replacement battery. BAT 3V6 Record Times Sampling Interval Record Times 1 sample every 10 seconds 45 hours 1 sample every minute 11 days 1 sample every 5 minutes 56 days 1 sample every 30 minutes 11 months 1 sample every hour 1.8 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years Specifications Specification Minimum Typical Maximum Unit Relative Humidity Measurement Range 0 100 %RH Humidity Repeatability (short term) ±0.1 %RH Accuracy (overall error, 20-80% RH) ±2.0* ±4.0 %RH Internal Resolution 0.5 %RH Long-term Stability 0.5 %RH/Yr Temperature Measurement Range -35 (-31) +80 (+176) °C (°F) Repeatability ±0.1 (±0.2) °C (°F) Accuracy (overall error) ±0.3 (±0.6) ±1.5 (±3) °C (°F) Internal Resolution 0.5 (1) °C (°F) Dew Point Accuracy (overall error) (25°C, 40-100%RH) ±1.1 (±2)** °C (°F) Logging Rate every 10s every 12hr - Memory Capacity 16,382 samples Operating Temperature Range -35 (-31) +80 (176) °C (°F) Battery Life 1*** Year * This specifies the overall error in the logged readings, for relative humidity measurements between 20 and 80%RH. ** This specifies the overall error in the calculated dew point, for relative humidity measurements between 40 and 100%RH at 25°C. *** Depending on sample rate, ambient temperature and use of alarm LEDs
- 10. Features • 0 to +100%RH Measurement Range • -35 to +80°C (-31 to +176°F) Measurement Range • Dew point indication via Windows control software • USB Interface for Set-up and Data Download • User-Programmable Alarm Thresholds for %RH & T • High contrast LCD, with two and a half digit temperature and humidity display function • Immediate, delayed and push-to-start logging • Status Indication via Red and Green LEDs • Supplied with Replaceable Internal Lithium Battery Programmable Elements • Logger Name • °C, °F • Logging Rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Immediate, delayed and push-to-start logging • Display off, on for 30 seconds after button press , or permanently on • Data rollover (Allows unlimited logging periods by overwriting the oldest data when the memory is full) Ordering Information Description Order Number RH, Temp, and Dew Point Data Logger Includes EL-USB-2-LCD data logger, software on CD, and battery. EL-USB-2-LCD Battery Replacement battery. BAT 3V6 Record Times Sampling Interval Record Times 1 sample every 10 seconds 45 hours 1 sample every minute 11 days 1 sample every 5 minutes 56 days 1 sample every 30 minutes 11 months 1 sample every hour 1.8 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years Specifications Specification Minimum Typical Maximum Unit Relative Humidity Measurement Range 0 100 %RH Humidity Repeatability (short term) ±0.1 %RH Accuracy (overall error, 20-80% RH) ±3.0 ±6.0 %RH Internal Resolution 0.5 %RH Long-term Stability 0.5 %RH/Yr Temperature Measurement Range -35 (-31) +80 (+176) °C (°F) Repeatability ±0.1 (0.2) °C (°F) Accuracy (overall error) ±0.5 (1) ±2 (±4) °C (°F) Internal Resolution 0.5 (1) °C (°F) Dew Point Accuracy (overall error) (25°C, 40-100%RH) ±1.1 (+2) °C (°F) Logging Rate every 10s every 12hr - Memory Capacity 16,382 samples Operating Temperature Range * -35 (-31) +80 (176) °C (°F) Battery Life 1** Year * At temperatures below -20°C (-4°F) the LCD will exhibit slower response times of approximately 10 seconds. ** Depending on sample rate, ambient temperature and use of alarm LEDs EL-USB-2-LCD Humidity, Temperature and Dew Point Data Logger 330-668-1444 10 www.dataq.com
- 11. www.dataq.com 11 330-668-1444 EL-USB-2-LCD+ Humidity, Temperature and Dew Point Data Logger Ordering Information Description Order Number Higher Accuracy RH, Temp, and Dew Point Data Logger with LCD Display Includes EL-USB-2-LCD+ data logger, software on CD, and battery. EL-USB-2-LCD+ Battery Replacement battery. BAT 3V6 Record Times Sampling Interval Record Times 1 sample every 10 seconds 45 hours 1 sample every minute 11 days 1 sample every 5 minutes 56 days 1 sample every 30 minutes 11 months 1 sample every hour 1.8 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years Specifications Specification Minimum Typical Maximum Unit Relative Humidity Measurement Range 0 100 %RH Humidity Repeatability (short term) ±0.1 %RH Accuracy (overall error, 20-80% RH) ±2.0* ±4.0 %RH Internal Resolution 0.5 %RH Long-term Stability 0.5 %RH/Yr Temperature Measurement Range -35 (-31) +80 (+176) °C (°F) Repeatability ±0.1 (±0.2) °C (°F) Accuracy (overall error) ±0.3 (±0.6) ±1.5 (±3) °C (°F) Internal Resolution 0.5 (1) °C (°F) Dew Point Accuracy (overall error) (25°C, 40-100%RH) ±1.1 (±2)** °C (°F) Logging Rate every 10s every 12hr - Memory Capacity 16,379 samples Operating Temperature Range -35 (-31) +80 (176) °C (°F) Battery Life 1*** Year * This specifies the overall error in the logged readings, for relative humidity measurements between 20 and 80%RH. ** This specifies the overall error in the calculated dew point, for relative humidity measurements between 40 and 100%RH at 25°C. *** Depending on sample rate, ambient temperature and use of alarm LEDs Features • More accurate than the EL-USB-2-LCD • 0 to +100%RH Measurement Range • -35 to +80°C (-31 to +176°F) Measurement Range • Dew point indication via Windows control software • USB Interface for Set-up and Data Download • User-Programmable Alarm Thresholds for %RH & T • High contrast LCD, with two and a half digit temperature and humidity display function • Immediate, delayed and push-to-start logging • Status Indication via Red and Green LEDs • Supplied with Replaceable Internal Lithium Battery Programmable Elements • Logger Name • °C, °F • Logging Rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Immediate, delayed and push-to-start logging • Display off, on for 30 seconds after button press , or permanently on • Data rollover (Allows unlimited logging periods by overwriting the oldest data when the memory is full)
- 12. EL-USB-3 Voltage Data Logger Features • 0-30V d.c. Measurement Range • Logging Rates between 1s and 12hr • Stores 32,510 readings • Connection via two screw terminals • USB Interface for Set-up and Data Download • User-Programmable Alarm Thresholds • Red and Green LED Status Indication • Replaceable Internal Lithium Battery Programmable Elements • Logger Name • Logging Rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Start Date and Start Time Specifications Specification Minimum Typical Maximum Unit Measurement Range 0 30 VDC Internal Resolution 50 mV Accuracy (overall error) ±1 % Input Impedance 60 KΩ Logging Rate every 1s every 12hr - Memory Size 32,510 Samples Operating Temperature Range -25 (-13) +80 (176) °C (°F) Battery Life 1* Year *Depending on ambient temperature, logging rate, and use of alarm LED. Ordering Information Description Order Number Voltage Data Logger Includes EL-USB-3 data logger, measurement leads, software on CD, and battery. EL-USB-3 Battery Replacement battery. BAT 3V6 Record Times Sampling Interval Record Times 1 sample every second 9 hours 1 sample every 10 seconds 90 hours 1 sample every minute 22 days 1 sample every 5 minutes 112 days 1 sample every 30 minutes 22 months 1 sample every hour > 2 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years 330-668-1444 12 www.dataq.com
- 13. www.dataq.com 13 330-668-1444 EL-USB-4 Current Loop Data Logger Features • 4-20mA Current Loop Measurement Range • Logging Rates between 1s and 12hr • Stores 32,000 readings • Connection via two screw terminals • USB Interface for Set-up and Data Download • User-Programmable Alarm Thresholds • Red and Green LED Status Indication • Replaceable Internal Lithium Battery Programmable Elements • Logger Name • Logging Rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Start Date and Start Time Specifications Specification Minimum Typical Maximum Unit Measurement Range 4 20 mA Shunt Resistance 110 Ohm Internal Resolution 0.05 mA Accuracy (overall error) ±1 % ±1count Logging Rate every 1s every 12hr - Memory Size 32,000 samples Operating Temperature Range -35 (-31) +80 (176) °C (°F) 1/2AA 3.6V Lithium Battery Life 1* Year *Depending on ambient temperature, logging rate, and use of alarm LED. Ordering Information Description Order Number Current Loop Data Logger Includes EL-USB-4 data logger, measurement leads, software on CD, and battery. EL-USB-4 Battery Replacement battery. BAT 3V6 Record Times Sampling Interval Record Times 1 sample every second 9 hours 1 sample every 10 seconds 90 hours 1 sample every minute 22 days 1 sample every 5 minutes 112 days 1 sample every 30 minutes 22 months 1 sample every hour > 2 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years
- 14. EL-USB-5 Event, State, and Count Data Logger 330-668-1444 14 www.dataq.com Features • Functions as an event, state, and counter logger • Logging rate of up to five times per second for events, two times per second for state changes and 100 times per second when counting • Stores up to 32,510 readings in event mode • Stores up to 32,510 readings in state change mode • Accepts input voltages of up to 24V • Volt free contacts option (normally open contact only) • Rising and falling edge triggering • LED flash on event / state change • Connection via two screw terminals • USB Interface for Set-up and Data Download • Replaceable Internal Lithium Battery Programmable Elements • Logger Name • Logging Rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Start Date and Start Time Record Times Sampling Interval Record Times 1 sample every second 9 hours 1 sample every 10 seconds 90 hours 1 sample every minute 22 days 1 sample every 5 minutes 112 days 1 sample every 30 minutes 22 months 1 sample every hour > 2 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years Ordering Information Description Order Number Event, State, Count Data Logger Includes EL-USB-5 data logger, measurement leads, software on CD, and battery. EL-USB-RCG Battery Replacement battery. BAT 3V6 Specifications Specification Minimum Typical Maximum Unit Time between events 200 Milliseconds Time between state changes 500 Milliseconds Time between event counts 10 Milliseconds Input voltage 3 28 V DC ‘Volt free contacts’ voltage 2.75 3.6 V ‘Volt free contacts’ current 35 μA Timing accuracy ±3 seconds per 24 hours Operating temperature range +80 (176) °C (°F) 1/2AA 3.6V Lithium Battery Life 1* Year *Depending on ambient temperature, logging rate, and use of alarm LED.
- 15. www.dataq.com 15 330-668-1444 EL-USB-ACT Current Data Logger Features • Compatible with AC or DC current clamps, current transformers, and current shunts • True RMS conversions for AC measurements • Sample intervals from 1s to 12hrs • Stores up to 127,000 readings • USB interface • Programmable alarms • High contrast LCD display • Included EL-Win-USB software for set-up and data analysis • Powered by replaceable AA batteries (2) Programmable Elements • Logger Name • Measurement mode (current, energy, power, voltage) • Logging Rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • Signal type (a.c. or d.c.) • Supply voltage (energy monitoring only) • Cost per kWh (energy monitoring only) • Scaling factor • High and Low Alarms • Start Date and Start Time Record Times Sampling Interval Record Times 1 sample every second 35 hours 1 sample every 10 seconds 14 days 1 sample every minute 88 days 1 sample every 5 minutes 14 months 1 sample every 30 minutes > 2 years 1 sample every hour > 2 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years Ordering Information Description Order Number EL-USB-ACT Current Data Logger Data logger with USB cable, software on CD, and two (2) AA batteries EL-USB-ACT Specifications Specification Minimum Typical Maximum Unit Measurement range (a.c.) 0 - 707 mV a.c. RMS Equivalent clamp measurement range (a.c.) 0 - 723 A a.c. Accuracy (a.c.) - 5 - % (±2 count) Frequency - - 100 Hz Measurement range (d.c.) -1000 - 1000 mV d.c. Equivalent clamp measurement range (d.c.) 0 - 1000 A d.c. Accuracy (d.c.) - 2 - % (±1 count) Measurement resolution - 1 - mV Display resolution* 1 - - mV Logging rate (Current measurement) Every 1s - Every 12hr - Logging rate (Energy measurement) Every 1s - Every 10s - Operating temperature range -10 (-31) - +50 (176) °C (°F) 1/2AA 3.6V Lithium Battery Life - - 6 Months * Display resolution will change, depending on the number of digits in use. The display will auto range to make the best use of available space ** Depending on sample rate, ambient temperature and use of LCD
- 16. 330-668-1444 16 www.dataq.com EL-USB-CO Carbon Monoxide Data Logger Features • 0 to 1000 ppm CO measurement range • Stores up to 32,510 Measurements • User-Programmable Warning Threshold with Bright Visual and Audible Warning • USB Interface for Set-up and Data Download • Expected sensor life: 4 years • Replaceable Internal Lithium Battery Programmable Elements • Logger Name • Logging Rate (10s, 30s, 1m, 5m) • Warning Threshold • Start Date and Start Time Specifications Specification Minimum Typical Maximum Unit Measurement Range 0 1000 ppm CO Internal Resolution 0.5 ppm CO Accuracy (error) ±6 % of reading Repeatability ±2 % of reading Decay of reading over time 5 % of reading/year Expected sensor life 4 years Response time (to reach 90%) 1 minute Logging Rate every 10s every 5min - Memory Capacity 32,510 samples Operating Temperature Range (15-90%RH, non-condensing) -10 (14) +40 (104) °C (°F) Operating pressure range 900 1100 mbar Battery Life 3 month * with battery supplied, 10 minute logging rate, 25°C ambient temperature, audible warning disabled, reading <10 ppm CO Ordering Information Description Order Number Carbon Monoxide Data Logger Includes EL-USB-CO data logger, software on CD, and battery. EL-USB-CO Battery Replacement battery. BAT 3V6 Record Times Sampling Interval Record Times 1 sample every 10 seconds 3.5 days 1 sample every 30 seconds 11 days 1 sample every minute 22 days 1 sample every 5 minutes 3.5 months PLEASE NOTE: The EL-USB-CO is a professional measuring instrument, designed to record Carbon Monoxide (CO) gas levels for later analysis. It is not an alarm/safety/warning device and should not be used in this capacity.
- 17. www.dataq.com 17 330-668-1444 EL-USB-TC Thermocouple Data Logger Features • -200 to +1300°C Measurement Range (K-type) • -130 to +900°C Measurement Range (J-type) • -200 to +350°C Measurement Range (T-type) • USB Interface for Set-up and Data Download • 2 User-Programmable Alarm Thresholds • Bright Red and Green LED Indication • Replaceable Internal Lithium Battery • Supplied with basic K-type thermocouple rated from 0 to 110°C (32 to 230°F) Programmable Elements • Logger Name • °C, °F • Logging Rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Start Date and Start Time • Range of Logging Modes available Specifications Specification Minimum Typical Maximum Unit Measurement range (K-type) -200 (-328) +1300 (2372) °C (°F) Measurement range (J-type) -130 (-202) +900 (1652) °C (°F) Measurement range (T-type) -200 (-328) +350 (662) °C (°F) Resolution (internal and displayed) 0.5 (1) °C (°F) Accuracy (logger error) ± 1 (2)** °C (°F) Logging Rate every 1s every 12hr - Memory Capacity 32,000 samples Operating Temperature Range* -10 (14) +40 (104) °C (°F) Battery Life*** 6 Month * Using thermocouple sensors, the EL-USB-TC can log temperatures as detailed above, but the data logger should not be subjected to temperatures outside the Operat- ing temperature range. ** EL-USB-TC is designed to be used when disconnected from USB port. *** @ 25°C and 1m logging rate Ordering Information Description Order Number Thermocouple Data Logger Includes EL-USB-TC data logger, 1.5m K-type Ther- mocouple, software on CD, and battery. EL-USB-TC Battery Replacement battery. BAT 3V6 Record Times Sampling Interval Record Times 1 sample every second 9 hours 1 sample every 10 seconds 90 hours 1 sample every minute 22 days 1 sample every 5 minutes 112 days 1 sample every 30 minutes 22 months 1 sample every hour > 2 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years
- 18. EL-USB-TC-LCD Thermocouple Data Logger with LCD Display Features • -200 to +1300°C Measurement Range (K-type) • -100 to +900°C Measurement Range (J-type) • -200 to +400°C Measurement Range (T-type) • High contrast LCD, with four digit temperature display • USB Interface for Set-up and Data Download • 2 User-Programmable Alarm Thresholds • Bright Red and Green LED Indication • Immediate, delayed and push-to-start logging • Replaceable Internal Lithium Battery • Supplied with basic K-type thermocouple rated from 0 to 300°C (32 to 446°F) Programmable Elements • Logger Name • °C, °F • Logging Rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Immediate, delayed and push-to-start logging • Display off, on for 30 seconds after button press , or permanently on • Data rollover (Allows unlimited logging periods by overwriting the oldest data when the memory is full) Specifications Specification Minimum Typical Maximum Unit Measurement range (K-type) -200 (-328) +1300 (2372) °C (°F) Measurement range (J-type) -100 (-148) +900 (1652) °C (°F) Measurement range (T-type) -200 (-328) +400 (752) °C (°F) Resolution (internal and displayed) 0.5 (1) °C (°F) Accuracy (logger error) ± 1 (2)** °C (°F) Logging Rate every 1s every 12hr - Memory Capacity 32,000 samples Operating Temperature Range* -10 (14) +40 (104) °C (°F) Battery Life*** 6 Month * Operating temperature applies to the data logger module only. ** Quoted accuracy is for the data logger only and excludes the thermocouple probe. *** @ 25°C and 1m logging rate and display off Ordering Information Description Order Number Thermocouple Data Logger with LCD Display Includes EL-USB-TC-LCD data logger, 1.5m K-type Thermocouple, software on CD, and battery. EL-USB-TC-LCD Battery Replacement battery. BAT 3V6 Record Times Sampling Interval Record Times 1 sample every second 9 hours 1 sample every 10 seconds 90 hours 1 sample every minute 22 days 1 sample every 5 minutes 112 days 1 sample every 30 minutes 22 months 1 sample every hour > 2 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years 330-668-1444 18 www.dataq.com
- 19. www.dataq.com 19 330-668-1444 EL-USB-TP-LCD Temperature Data Logger Features • -40 to +125°C (-40 to +257°F) measurement range • ±1.5°C (±2.7°F) accuracy • High contrast LCD display • Included 1-meter thermistor probe • USB interface • Included EL-WIN-USB software for set-up and data analysis • Programmable alarms with visual alerts • Included long-life ½AA replaceable lithium battery Programmable Elements • Logger Name • °C, °F • Logging Rate (1s, 10s, 30s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Start Date and Start Time Record Times Sampling Interval Record Times 1 sample every second 9 hours 1 sample every 10 seconds 3 days 1 sample every 30 seconds 11 days 1 sample every minute 22 days 1 sample every 5 minutes 112 days 1 sample every 30 minutes 677 days 1 sample every hour > 2 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years Ordering Information Description Order Number EL-USB-TP-LCD Temperature Data Logger Includes data logger, one (1) battery (preinstalled), one (1) thermistor probe, downloadable configura- tion, review and Excel export software. EL-USB-TP-LCD Battery Replacement battery. BAT 3V6 Specifications Specification Minimum Typical Maximum Unit Supplied probe measurement range -40 (-40) - +125 (+257) °C (°F) Operating temperature range* -10 (+14) - +40 (+104) °C (°F) Resolution (internal and displayed) - 0.5 (1) - °C (°F) Accuracy (logger error) ±1.5 (±2.7) °C (°F) Logging rate ever 1s - every 12 hr - Battery life** - 6** - Months * Operating temperature applies to the data logger unit only. ** Depending on sample rate, ambient temperature and use of LCD.
- 20. EL-USB-TP-LCD+ High Accuracy Temperature Data Logger Features • -40 to +125°C (-40 to +257°F) measurement range • ±0.7°C (±1.3°F) accuracy • High contrast LCD display • Included 3-meter thermistor probe • USB interface • Included EL-WIN-USB software for set-up and data analysis • Programmable alarms with visual alerts • Included long-life ½AA replaceable lithium battery Programmable Elements • Logger Name • °C, °F • Logging Rate (1s, 10s, 30s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • High and Low Alarms • Start Date and Start Time Record Times Sampling Interval Record Times 1 sample every second 9 hours 1 sample every 10 seconds 3 days 1 sample every 30 seconds 11 days 1 sample every minute 22 days 1 sample every 5 minutes 112 days 1 sample every 30 minutes 677 days 1 sample every hour > 2 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years Ordering Information Description Order Number EL-USB-TP-LCD +Temperature Data Logger Includes data logger, one (1) battery (preinstalled), one (1) thermistor probe, downloadable configura- tion, review and Excel export software. EL-USB-TP- LCD+ Battery Replacement battery. BAT 3V6 Specifications Specification Minimum Typical Maximum Unit Supplied probe measurement range -40 (-40) - +125 (+257) °C (°F) Operating temperature range* -10 (+14) - +40 (+104) °C (°F) Resolution (internal and displayed) - 0.5 (1) - °C (°F) Accuracy ±0.7 (±1.3) °C (°F) Logging rate ever 1s - every 12 hr - Battery life** - 6** - Months * Operating temperature applies to the data logger unit only. ** Depending on sample rate, ambient temperature and use of LCD. 330-668-1444 20 www.dataq.com
- 21. A B Dimensions Dimension in inches (mm) Model Number A B EL-USB-LITE 0.72 (18.5) 2.67 (68.0) EL-USB-1 1.02 (25.9) 3.86 (98.0) EL-USB-1-LCD 1.04 (26.4) 4.7 (119.5) EL-USB-1-RCG 0.78 (19.8) 3.65 (92.7) EL-USB-1-PRO 0.69 (17.5) 4.33 (110.0) EL-USB-2 1.04 (26.4) 4.06 (103.0) EL-USB-2+ 1.04 (26.4) 4.06 (103.0) EL-USB-2-LCD 1.00 (25.3) 4.96 (126.0) EL-USB-2-LCD+ 1.00 (25.3) 4.96 (126.0) EL-USB-3 1.06 (26.9) 4.41 (112.0) EL-USB-4 1.06 (26.9) 4.43 (112.5) EL-USB-5 1.06 (26.9) 4.43 (112.5) EL-USB-CO 1.03 (26.2) 4.93 (125.2) EL-USB-ACT 1.93 (49.0) 5.51 (140.0) EL-USB-TC 1.06 (26.9) 4.65 (118.1) EL-USB-TC-LCD 0.9 (23.9) 5.3 (134.5) EL-USB-TP-LCD 0.94 (23.9) 5.29 (134.5) EL-USB-TP-LCD+ 0.94 (23.9) 5.29 (134.5) 330-668-1444 21 www.dataq.com
- 22. DATAQ, the DATAQ logo and WinDaq are registered trademarks of DATAQ Instruments, Inc. All rights reserves. Copyright © DATAQ Instruments, Inc. The information on this data sheet is subject to change without notice. DATAQ Instruments, Inc. 241 Springside Drive Akron, Ohio 44333 Phone: 330-668-1444 Fax: 330-666-5434 Data Acquisition Product Links (click on text to jump to page) Data sition | Data Logger Lascar Data Logger Product Lines EL-USB Data Loggers Lascar EasyLog model EL-USB series products are a line of low cost, compact, battery-operated data loggers with built-in memory and a USB interface for easy setup and data download. Each product in the line offers a specific measurement function (including temperature, voltage, process current, and more). EL-GFX Data Loggers The EL-GFX line of data loggers is the latest release from Lascar Electronics with similar functionality of the EL-USB series with an added graphic display for data. EL-WiFi Data Loggers Lascar’s EL-Wifi Data Logger series products are low cost, compact, battery-operated data loggers with wireless connectivity to any PC over a WiFi router. Each product in the line features a large, easy-to-read display of current measurements, and is purchased for specific measurement functions.