Data sheet model170-0
- 1. The Series 100 Genie® Membrane Separators ™ The Model 170 Model 170 The Model 170 protects gas systems requiring very low sample flow rates on a continuous or intermittent basis. Its small internal volume and low dead volume 1/16” ports allow the Genie® Model 170 to purge quickly, which is ideal for the removing liquid aerosol droplets from gas samples; it is also perfect for protecting components such as laboratory gas chromatographs. Please note that special low volume fittings must be ordered to use a Genie® Model 170 properly. A Universal Assembly™ preassembled kit is also available which includes all the necessary components required for easy, proper installation into an existing sample system. This model includes a 316 SS Genie® Model 170 equipped with your choice of membrane, rotameter, mounting bracket, and all basic fittings (outlet tubing not included). Specification Applications: Benefits: Features: • Analyser protection against liquids in low flow gas sample conditioning systems • On-line, portable analysers and laboratory GC’s, Mass Specs, H2S, Moisture, and others • Superior analyser protection • Helps preserve sample integrity • Improves analyser reliability • Reduces analyser maintenance • Genie® Membrane Technology™ • Extremely low internal volume • Simple design • No elastomers required for sealing Spot, composite, or continuous gas sampling in any process industry including: * See overleaf for ordering information and part numbers & descriptions • Natural gas • Petrochemical • Oil refining t: +44(0)151 666 8300 f: +44(0)151 666 8329 e: sales@a1-cbiss.com www.a1-cbiss.com
- 2. The Series 100 Genie® Membrane Separators ™ The Model 170 Specification Maximum pressure rating 170: 500 psig 170UA: 100 psig (due to rotameter limitations) Maximum recommended Lowest possible pressure consistent with application* supply pressure *Must not exceed “Pressure rating” listed a b ove Maximum temperature 185 °F (85 °C) for Type 6/BTU membrane 302 °F (150 °C) for Hi-Flow membrane Maximum recommended 300 cc/min for Type 6/BTU membrane* membrane flow rate 750 cc/min for Hi-Flow membrane* *Maximum flow results in approximately 2 psi membrane differential pressure Port sizes Inlet, Outlet, & Bypass: 1/16” low volume fittings Wetted materials Machined parts: 316 stainless steel / NACE compliant All other metal parts: stainless steel / NACE compliant Membrane: Inert Dimensions Back View Side View Back View Side View t: +44(0)151 666 8300 f: +44(0)151 666 8329 e: sales@a1-cbiss.com www.a1-cbiss.com