Design communication (degree) assignment 2b-2015

1
SCHOOL OF ARCHITECTURE, BUILDING & DESIGN
Centre For Modern Architecture Studies in Southeast Asia
Bachelor of Science (Honours) (Architecture
DESIGN COMMUNICATION [ARC 1713]
Prerequisite: None
_____________________________________________________________________
Project: 2b
Axonometric projection
Submission date: 28 May 2015
Introduction
Axonometric drawing is an excellent method of communicating and expressing an architectural idea – be it
as a diagram at a fairly early stage of the design process (ie. conceptual expression) or as a presentation
aid upon finalization of your design.
Axonometric drawings are a visually instigating and exciting way of expressing an idea clearly with minimal
words if executed well.
Objectives of Project
In the production of the work for the Orthographic Projections assessment, you would have, by now, a fairly
in-depth understanding of the architectural detail and spatial value of the Farnsworth House.
In the next exercise, you will learn how to execute an axonometric projection by generating partial of an
external and a sectional (internal) axonometric of the house.
These projections will be generated at a scale of 1:75 on A2-sized butter paper (for construction) and finally
inked on A2-sized trace.
Learning Outcomes of this Project
1. Ability to express spatial ideas and architectural detail in three-dimension, in the format of an
axonometric projection.
2. Understanding of what axonometric projections are, how to generate them and how to apply them
to the design process and presentation.
3. Ability to produce legible architectural drawings.

2
Tasks - Methodology
Following the demonstration in the lecture, use pencil and butter paper to generate an external axonometric
drawing of the Eames House. You are to refer to your orthographic drawings AND the documents for
measurements and information throughout this exercise. After having confidently constructed your drawing
in pencil, proceed to trace your final ink drawing on tracing paper. You will have two workshop sessions
(read: one week) to produce the external axonometric.
In the remainder two workshop sessions, you will generate a sectional axonometric drawing showing both
interior and exterior of the building.
Submission Requirement
Parts of the Farnsworth House must show interior and some part are exterior. Please submit the
construction drawing (pencil on butter paper) and final presentation drawing (ink on trace paper).
Assessment criteria
 Understanding and ability to generate axonometric drawings
 Communicate understanding of architectural detail and spatial value with clarity and accuracy
 Quality of hand-drawing skills (neatness of line, overall visual aesthetic of the drawing, etc.)
 Appropriate use of technique and scale
Marking criteria
Marks shall be distributed according to the assessment criteria mentioned above.
Suggested References
Ching, Francis 2003. Architectural Graphics, 4th Edition, John Wiley & Sons, Inc, New York
Uddin, M. Salleh 1997. ‘Chapter 2: Conventions and Construction of Paralines’ in Axonometric and Oblique
Drawings: A 3-D Construction, Rendering, and Design Guide, The Mc-Graw-Hill Companies, New York, pp.
7-46.
Uddin, M. Salleh 1997. ‘Exploded Axonometric’, in Axonometric and Oblique Drawings: A 3-D Construction,
Rendering, and Design Guide, The Mc-Graw-Hill Companies, New York, pp. 123-132.

3
Prerequisite: None
_____________________________________________________________________
Project: 2b
Marking Rubric For Axonometric Projections
Learning Outcomes of this Project (as stated in outline)
 Ability to express spatial ideas and architectural detail in three-dimension, in the format of an
axonometric projection.
 Understanding of what axonometric projections are, how to generate them and how to apply them
to the design process and presentation.
 Ability to produce legible architectural drawings.
Assessment criteria (as stated in outline and in lecture)
The students are to prove their ability as mentioned in the learning outcomes through the following
criteria:
 Confidence in executing axonometric projection
 Understanding of building in three-dimension
 Extra marks for visual strength, composition, and added detail
Marking rubric
Criteria Guideline: Considerations when awarding points
Does the student know how to draw in axonometric?
This will be evident in:
Construction of axonometric Is it evident from submitted butter paper drawings that the
student has constructed his own drawing? In these
constructions has he demonstrated an understanding of the
basics in projecting axonometrics?
Does the student know what he is drawing?
Building & architectural details Is the student clear on what he is drawing?
Are details such as wall thickness, window framing,

4
sectional cuts, roof detail, furniture detail and stair design
clearly drawn?
And to what extent and detail has the student illustrated any
or all and more of the above-mentioned?
How have they enriched their drawings? (bonus section)
1 Visual strength/composition How has the student creatively composed his drawings
together on the submitted sheet?
Has the student experimented with different lineweights,
medium or other drawing techniques to enhance the
drawing and/or the legibility of it?
If so, how successful has he been with it?
2 Added details Has the student added more detail to his drawing to give it
life?
If so, how much illustration and detail has he executed?
Has he demonstrated a confident style and/or consistent
language throughout his drawing and the finer details?
Has he been successful in the overall communication of the
building, space and its function?
Using the rubric
Using the above criteria and series of questions as a guide, grade the student based on an average of the
three main questions. Meaning out of the total of 15% weightage that this assessment carries, each of the
three questions will carry 5%.
From 0 being none of the criteria met; to 1 for weak; 3 for average; 4 for good and 5 for excellent work, this
is still a rough scale and guide as the student’s progress in class should also be accounted for (hence using
this rubric more as a guide than a strict rule). Students’ whose works are around average but have proved to
you a tremendous development during workshop times will therefore score a higher grade.

5
Prerequisite: None
_____________________________________________________________________
Project: 2c
Perspectives
Learning Outcomes of this Project (as stated in outline)
 Ability to express spatial ideas and architectural detail in three-dimension, in the format of one-
point and two-point perspectives.
 Understanding of what perspectives (and its different types) are, how to generate them and how to
apply them to the design process and presentation.
 Ability to produce legible architectural drawings with strong creative intent.
Assessment criteria (as stated in outline and in lecture)
The students are to prove their ability as mentioned in the learning outcomes through the following
criteria:
 Confidence in executing perspectives
 Understanding of building in three-dimension
 Extra marks for visual strength, composition, and added detail
Marking rubric
Criteria Guideline: Considerations when awarding points
Learning outcome # 1: Does the student know how to draw in perspectives?
Construction of perspectives Is it evident from submitted butter paper drawings that the
student has constructed his own drawing?
In these constructions has he demonstrated an
understanding of the basics in projecting one-point and two
point perspectives?
Has the student given thought as to how he is setting up his
perspectives (choice of Eye Level, viewing angle, SP
positioning, etc.)?

6
Learning outcome #2: Does the student know what he is drawing?
Building & architectural details Is the student clear on what he is drawing?
Are details such as wall thickness, window framing,
sectional cuts, roof detail, furniture detail and stair design
clearly drawn?
And to what extent and detail has the student illustrated any
or all and more of the above-mentioned?
Learning outcome #3: How have they enriched their drawings? (bonus section)
Visual strength & composition How has the student creatively composed his drawings
together on the submitted sheet?
Has the student experimented with different lineweights,
medium or other drawing techniques to enhance the
drawing and/or the legibility of it?
If so, how successful has he been with it?
Added details Has the student added more detail to his drawing to give it
life?
If so, how much illustration and detail has he executed?
Has he demonstrated a confident style and/or consistent
language throughout his drawing and the finer details?
Has he been successful in the overall communication of the
building, space and its function?
Using the rubric & assessing the students
Using the above criteria and series of questions as a guide, grade the student based on an average of the
three main questions. Meaning out of the total of 15% weightage that this assessment carries, each of the
three questions will carry 5%. From 0 being none of the criteria met; to 1 for weak; 3 for average; 4 for good
and 5 for excellent work, this is still a rough scale and guide as the student’s progress in class should also
be accounted for (hence using this rubric more as a guide than a strict rule). Students’ whose works are
around average but have proved to you a tremendous development during workshop times will therefore
score a higher grade.
Note: In comparison to the axonometric exercise, it is more important that the final drawings are more
visually coherent than they are accurately

Design communication (degree) assignment 2b-2015

More Related Content

Viewers also liked (20)

Similar to Design communication (degree) assignment 2b-2015 (20)

More from Chow Hong Da (20)

Recently uploaded (20)

Design communication (degree) assignment 2b-2015